Nortel-Magellan-Passport-OamEthernetMIB :: lpOamEnetTestCauseOfTermination

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › Nortel-Magellan-Passport-OamEthernetMIB › lpOamEnetTestCauseOfTermination

lpOamEnetTestCauseOfTermination

Module: Nortel-Magellan-Passport-OamEthernetMIB

OID (symbolic): Nortel-Magellan-Passport-OamEthernetMIB::lpOamEnetTestCauseOfTermination

OID (numeric): 1.3.6.1.4.1.562.2.4.1.12.27.2.11.1.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: This attribute records the reason why the test terminated.

The possible values of this attribute are: testTimeExpired: this value indicates the time allotted for the test to run has expired which caused the test terminate. If the port is locked without the forever option then it will remain locked for only five minutes before being automatically unlocked. If the port unlocks itself after five minutes while the test is running then this attribute will be set to testTimeExpired. If the forever option is used then the test will run until completion, failure, or a Stop command.

stoppedByOperator: this value indicates that the test was terminated when an operator issued a Stop command.

unknown: this value indicates that the test terminated for an unknown reason.

neverStarted: this value indicates that the test never started because the port could not be locked or because there is a hardware failure preventing the tests from running.

testRunning: this value indicates that the test is currently running.

testComplete: this value indicates that the test completed normally.

What is lpOamEnetTestCauseOfTermination?

Reports why the last port test ended: testTimeExpired(0) the 5-minute lock window ran out, stoppedByOperator(1) a Stop command was issued, unknown(2), neverStarted(3) the port couldn't be locked or hardware prevented it, testRunning(4) still in progress, or testComplete(5) finished normally.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.27.2.11.1.1
snmpwalk -v2c -c public <target> Nortel-Magellan-Passport-OamEthernetMIB::lpOamEnetTestCauseOfTermination

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.562.2.4.1.12.27.2.11.1.1.1
snmpget -v2c -c public <target> Nortel-Magellan-Passport-OamEthernetMIB::lpOamEnetTestCauseOfTermination.1

Start monitoring Nortel Magellan Passport switch, Ethernet-equipped (OAM Ethernet) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the Nortel-Magellan-Passport-OamEthernetMIB::lpOamEnetTestCauseOfTermination OID value, configure state conditions and alerts, and monitor any Nortel Magellan Passport switch, Ethernet-equipped (OAM Ethernet) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.562nortelCPM-NORTEL-MIB
1.3.6.1.4.1.562.2magellanNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4passportNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1componentsNortel-Magellan-Passport-UsefulDefinitionsMIB
1.3.6.1.4.1.562.2.4.1.12lpNortel-Magellan-Passport-LogicalProcessorMIB
Numeric OIDNameModule
1.3.6.1.4.1.562.2.4.1.12.27lpOamEnetNortel-Magellan-Passport-OamEthernetMIB
1.3.6.1.4.1.562.2.4.1.12.27.2lpOamEnetTestNortel-Magellan-Passport-OamEthernetMIB
1.3.6.1.4.1.562.2.4.1.12.27.2.11lpOamEnetTestResultsTableNortel-Magellan-Passport-OamEthernetMIB
1.3.6.1.4.1.562.2.4.1.12.27.2.11.1lpOamEnetTestResultsEntryNortel-Magellan-Passport-OamEthernetMIB
1.3.6.1.4.1.562.2.4.1.12.27.2.11.1.1lpOamEnetTestCauseOfTerminationNortel-Magellan-Passport-OamEthernetMIB