NOKIA-IPSO-SYSTEM-MIB

All MIBs › NOKIA-IPSO-SYSTEM-MIB

Organization: Nokia

Last Updated: 2000-01-30

Category: Nokia IPSO Security Appliances, Security & Authentication

Description: Monitors Nokia IPSO appliance system resources, software version, and platform health status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NOKIA-IPSO-SYSTEM-MIB?

NOKIA-IPSO-SYSTEM-MIB is a Nokia MIB for the IPSO (IP Security Operating System) platform used on Nokia's IP-series security appliances, covering core system-level hardware resources. It exposes disk-related status objects including disk mirror set configuration/status and per-drive disk inventory, alongside chassis, fan, and other platform hardware groupings referenced in its object tree. This MIB directly supports hardware and software status monitoring by tracking disk mirror (RAID) health and individual disk drive status, both critical indicators of storage subsystem reliability and impending failure. It is a standalone platform MIB but is used alongside standard MIB-II system objects and other Nokia IPSO-specific MIBs for complete appliance health visibility. It is typically deployed in Nokia IP-series firewall/VPN appliances running IPSO where storage redundancy and general chassis health must be continuously verified. Engineers can download the NOKIA-IPSO-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NOKIA-IPSO-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Nokia IP-series security appliances running IPSO (Check Point firewall platform)

Monitoring Examples

An administrator would poll ipsoDiskMirrorSetTable to confirm a configured RAID/mirror set remains healthy and synchronized, and cross-check ipsoDiskDriveTable for the status of each individual physical disk drive in the appliance. A mirror set reporting a degraded or resyncing state, or a disk drive entry showing a fault, would indicate a failing disk requiring replacement before data redundancy is lost. The module's object tree also references chassis and fan groupings (noted as ipsoChassisGroup and ipsoFanGroup in the source, though marked as removed in this revision), reflecting the platform's original scope of broader chassis hardware monitoring.

What Can Be Monitored

disk mirror (RAID) set status
individual disk drive status
chassis/platform inventory (per module history)

Imported Objects

From HOST-RESOURCES-MIB

hrFSMountPoint	OBJECT-TYPE
hrPartitionIndex	OBJECT-TYPE
hrPartitionLabel	OBJECT-TYPE
hrPartitionSize	OBJECT-TYPE

From IANAifType-MIB

IANAifType

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DateAndTime
DisplayString

How to Use in IPNetwork Monitor

Example using ipsoProcessorUtilization OID:

Select a Nokia IP-series security appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ipsoProcessorUtilization into the Find box to locate it in the OID tree, then select it and click OK. The current percentage of CPU utilization. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if utilization exceeds 85%, a common warning threshold before sustained high load affects performance. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR ipsoAssetChassisSerialNumber	1.3.6.1.4.1.94.1.21.1.10.1	DisplayString	read-only	The serial number of this device.
ipsoAssetEntry	1.3.6.1.4.1.94.1.21.1.10.12.1		not-accessible	A sequence of package entries containing the version number, license information and policy type for the particular package.
ipsoAssetGroup	1.3.6.1.4.1.94.1.21.1.10			A collection of objects representing some of the basic assets of the IPSO system.
ipsoAssetTable	1.3.6.1.4.1.94.1.21.1.10.12		not-accessible	A table of currently installed packages and their relevant information.
ipsoCardEntry	1.3.6.1.4.1.94.1.21.1.1.6.1		not-accessible	A sequence of slot entries containing the operational status, and ifType (if applicable) of the slot's module.
I32 ipsoCardIndex	1.3.6.1.4.1.94.1.21.1.1.6.1.1	Integer32	read-only	The number of the slot in which this card is plugged.
INT ipsoCardOperStatus	1.3.6.1.4.1.94.1.21.1.1.6.1.2	INTEGER	read-only	The operational status of this card.
ipsoCardTable	1.3.6.1.4.1.94.1.21.1.1.6		not-accessible	A table of slots or onboard network interfaces in the chassis.
ipsoChassisGroup	1.3.6.1.4.1.94.1.21.1.1			A collection of objects providing the instrumentation of ipsoChassis
STR ipsoChassisMBRevNumber	1.3.6.1.4.1.94.1.21.1.1.3	DisplayString	read-only	The revision number for the motherboard of this chassis.
STR ipsoChassisMBSerialNumber	1.3.6.1.4.1.94.1.21.1.1.4	DisplayString	read-only	The serial number for the motherboard of this chassis.
STR ipsoChassisMBType	1.3.6.1.4.1.94.1.21.1.1.2	DisplayString	read-only	An string value representing the type of motherboard populating this device.
STR ipsoChassisSerialNumber	1.3.6.1.4.1.94.1.21.1.1.1	DisplayString	read-only	The serial number of this device.
INT ipsoChassisTemperature	1.3.6.1.4.1.94.1.21.1.1.5	INTEGER	read-only	An indication of whether or not the internal temperature reading of this chassis is higher than the recommended operating temperature.
ipsoConfigEntry	1.3.6.1.4.1.94.1.21.1.4.1.1		not-accessible	A list of attributes for each available configuration on this system.
DAT ipsoConfigFileDateAndTime	1.3.6.1.4.1.94.1.21.1.4.1.1.3	DateAndTime	read-only	The date and time of the last time this file was changed.
STR ipsoConfigFilePath	1.3.6.1.4.1.94.1.21.1.4.1.1.2	DisplayString	read-only	The absolute pathname and filename which holds a record of this configuration, truncated to within 255 characters.
ipsoConfigGroup	1.3.6.1.4.1.94.1.21.1.4			A collection of objects providing the instrumentation of ipsoConfigGroup
I32 ipsoConfigIndex	1.3.6.1.4.1.94.1.21.1.4.1.1.1	Integer32	read-only	The index for this configuration, with 1 representing the currently running database and traversing from newest to oldest.
STR ipsoConfigLogDescr	1.3.6.1.4.1.94.1.21.1.4.3.1.2	DisplayString	read-only	A synopsis of the nature of the configuration change.
ipsoConfigLogEntry	1.3.6.1.4.1.94.1.21.1.4.3.1		not-accessible	A listing of attributes for a configuration change. This table lists the oldest configuration change in the table and proceeds toward the most recent configuration change.
I32 ipsoConfigLogIndex	1.3.6.1.4.1.94.1.21.1.4.3.1.1	Integer32	read-only	The unique index of this configuration change entry.
I32 ipsoConfigLogSize	1.3.6.1.4.1.94.1.21.1.4.2	Integer32	read-write	A maximum limit on the number of entries which may be recorded in the ipsoConfigLogTable.
ipsoConfigLogTable	1.3.6.1.4.1.94.1.21.1.4.3		not-accessible	A log of the most recent configuration changes on this system.
ipsoConfigTable	1.3.6.1.4.1.94.1.21.1.4.1		not-accessible	A table of available configurations for this system.
I32 ipsoCPUFreq	1.3.6.1.4.1.94.1.21.1.10.4	Integer32	read-only	The CPU frequency.
STR ipsoCPUMfr	1.3.6.1.4.1.94.1.21.1.10.3	DisplayString	read-only	The CPU manufacturer of this device.
STR ipsoCPUModel	1.3.6.1.4.1.94.1.21.1.10.2	DisplayString	read-only	The CPU model of this device.
INT ipsoDaysToExpire	1.3.6.1.4.1.94.1.21.1.11.2	INTEGER	read-only	Number of Day(s) for the license to expire, the value of this object is zero, if the license for feature has expired.
STR ipsoDiskDriveCapacity	1.3.6.1.4.1.94.1.21.1.10.13.1.4	DisplayString	read-only	The total data holding capacity of the disk drive.
ipsoDiskDriveEntry	1.3.6.1.4.1.94.1.21.1.10.13.1		not-accessible	A sequence of objects describing each disk drive.
I32 ipsoDiskDriveIndex	1.3.6.1.4.1.94.1.21.1.10.13.1.1	Integer32	read-only	The drive index used to identify a particular row in table.
STR ipsoDiskDriveLocation	1.3.6.1.4.1.94.1.21.1.10.13.1.5	DisplayString	read-only	The location of the disk drive.
STR ipsoDiskDriveModel	1.3.6.1.4.1.94.1.21.1.10.13.1.3	DisplayString	read-only	The model of the disk drive.
ipsoDiskDriveTable	1.3.6.1.4.1.94.1.21.1.10.13		not-accessible	A table of all disk drives currently on this system.
ipsoDiskMirrorGroup	1.3.6.1.4.1.94.1.21.1.9			A collection of objects providing the instrumentation of ipsoDiskMirroring
I32 ipsoDiskMirrorSetDestinationDriveIndex	1.3.6.1.4.1.94.1.21.1.9.2.1.3	Integer32	read-only	The destination drive of the mirror set.
ipsoDiskMirrorSetEntry	1.3.6.1.4.1.94.1.21.1.9.2.1		not-accessible	A sequence of objects describing each mirror set.
I32 ipsoDiskMirrorSetIndex	1.3.6.1.4.1.94.1.21.1.9.2.1.1	Integer32	read-only	The mirror set index used to identify a mirror set present on the system.
I32 ipsoDiskMirrorSetSourceDriveIndex	1.3.6.1.4.1.94.1.21.1.9.2.1.2	Integer32	read-only	The source drive of the mirror set.
STR ipsoDiskMirrorSetSyncPercent	1.3.6.1.4.1.94.1.21.1.9.2.1.4	DisplayString	read-only	The percentage of the space in sync of source drive with the destination drive.
ipsoDiskMirrorSetTable	1.3.6.1.4.1.94.1.21.1.9.2		not-accessible	A table of all mirror sets currently on this system.
ipsoFanEntry	1.3.6.1.4.1.94.1.21.1.2.1.1		not-accessible	A grouping of objects displaying certain characteristics of each fan present in the chassis.
ipsoFanGroup	1.3.6.1.4.1.94.1.21.1.2			A collection of objects providing the instrumentation of ipsoFanGroup
I32 ipsoFanIndex	1.3.6.1.4.1.94.1.21.1.2.1.1.1	Integer32	read-only	A unique index for this particular fan.
INT ipsoFanOperStatus	1.3.6.1.4.1.94.1.21.1.2.1.1.2	INTEGER	read-only	The operational status of this fan.
ipsoFanTable	1.3.6.1.4.1.94.1.21.1.2.1		not-accessible	A listing of fans which are present in this chassis.
STR ipsoFeatureName	1.3.6.1.4.1.94.1.21.1.11.1	DisplayString	read-only	The feature name that is licensed.
ipsoImageEntry	1.3.6.1.4.1.94.1.21.1.5.1.1		not-accessible	A series of attributes for each image including date loaded, version number, serial number, etc.
ipsoImageGroup	1.3.6.1.4.1.94.1.21.1.5			A collection of objects providing the instrumentation of ipsoImage Group
I32 ipsoImageIndex	1.3.6.1.4.1.94.1.21.1.5.1.1.1	Integer32	read-only	A unique index for the image represented by this entry. The currently running image has a index value of 1, and subsequent images are indexed from earliest loaded image to most recently loaded image.
STR ipsoImageSerialNumber	1.3.6.1.4.1.94.1.21.1.5.1.1.3	DisplayString	read-only	The serial number of this image.
ipsoImageTable	1.3.6.1.4.1.94.1.21.1.5.1		not-accessible	A table of resident kernel images on this system, including the currently up-and-running kernel.
DAT ipsoImageTimeOfLoad	1.3.6.1.4.1.94.1.21.1.5.1.1.4	DateAndTime	read-only	The date and time when this instance of the image had been first transferred onto this device.
STR ipsoImageVersionNumber	1.3.6.1.4.1.94.1.21.1.5.1.1.2	DisplayString	read-only	The version number of this image.
I32 ipsoKernMaxMem	1.3.6.1.4.1.94.1.21.1.10.5	Integer32	read-only	The maximum amount of kernel memory.
ipsoLicenseGroup	1.3.6.1.4.1.94.1.21.1.11			A collection of objects sent as a part of license trap.
STR ipsoMotherBoardModel	1.3.6.1.4.1.94.1.21.1.10.8	DisplayString	read-only	The model number of the motherboard.
STR ipsoMotherBoardRev	1.3.6.1.4.1.94.1.21.1.10.7	DisplayString	read-only	The revision number of the motherboard.
STR ipsoMotherBoardSerNum	1.3.6.1.4.1.94.1.21.1.10.6	DisplayString	read-only	The serial number of the motherboard.
ipsoNotificationGroup	1.3.6.1.4.1.94.1.21.1.8			A collection of notifications providing the instrumentation of ipsoNotification
STR ipsoOSRelease	1.3.6.1.4.1.94.1.21.1.10.9	DisplayString	read-only	The release number current IPSO OS.
STR ipsoOSVersion	1.3.6.1.4.1.94.1.21.1.10.10	DisplayString	read-only	The version number of the current IPSO OS.
INT ipsoPkgIndex	1.3.6.1.4.1.94.1.21.1.10.12.1.1	INTEGER	read-only	The index used to iterate through all packages which are installed and currently running, ie, Checkpoint, ISS, etc.
STR ipsoPkgLicense	1.3.6.1.4.1.94.1.21.1.10.12.1.5	DisplayString	read-only	The license information of the package.
STR ipsoPkgMajorVersion	1.3.6.1.4.1.94.1.21.1.10.12.1.3	DisplayString	read-only	The major version number of the package. For FireWall NG, this displays the Build and Feature Pack information.
STR ipsoPkgMinorVersion	1.3.6.1.4.1.94.1.21.1.10.12.1.4	DisplayString	read-only	The minor version number of the package. For Firewall NG, this is not applicable.
STR ipsoPkgName	1.3.6.1.4.1.94.1.21.1.10.12.1.2	DisplayString	read-only	The package name.
ipsoPowerSupplyEntry	1.3.6.1.4.1.94.1.21.1.3.1.1		not-accessible	A list of characteristics of each power supply.
ipsoPowerSupplyGroup	1.3.6.1.4.1.94.1.21.1.3			A collection of objects providing the instrumentation of ipsoPowerSupply
I32 ipsoPowerSupplyIndex	1.3.6.1.4.1.94.1.21.1.3.1.1.1	Integer32	read-only	A unique index representing this power supply.
INT ipsoPowerSupplyOperStatus	1.3.6.1.4.1.94.1.21.1.3.1.1.3	INTEGER	read-only	The operational status of this power supply.
INT ipsoPowerSupplyOverTemperature	1.3.6.1.4.1.94.1.21.1.3.1.1.2	INTEGER	read-only	An indication of whether or not this power supply's internal temperature is over the recommended operation temperature limit.
ipsoPowerSupplyTable	1.3.6.1.4.1.94.1.21.1.3.1		not-accessible	A table of all power supplies installed in this chassis.
ipsoProcessEntry	1.3.6.1.4.1.94.1.21.1.7.2.1		not-accessible	A sequence of objects describing each process's execution.
ipsoProcessGroup	1.3.6.1.4.1.94.1.21.1.7			A collection of objects providing the instrumentation of ipsoProcessor Group
I32 ipsoProcessID	1.3.6.1.4.1.94.1.21.1.7.2.1.1	Integer32	read-only	This process's ID.
I32 ipsoProcessMemory	1.3.6.1.4.1.94.1.21.1.7.2.1.4	Integer32	read-only	The amount of memory in kilobytes which this process is utilizing in its current execution state.
G32 ipsoProcessorUtilizationEx	1.3.6.1.4.1.94.1.21.1.7.1	Gauge32	read-only	The current percentage of CPU utilization.
STR ipsoProcessOwner	1.3.6.1.4.1.94.1.21.1.7.2.1.3	DisplayString	read-only	The name of the user who is given execution of this process.
I32 ipsoProcessParentID	1.3.6.1.4.1.94.1.21.1.7.2.1.2	Integer32	read-only	The ID of this process's parent process.
I32 ipsoProcessPercentCPU	1.3.6.1.4.1.94.1.21.1.7.2.1.5	Integer32	read-only	The percentage of the CPU cycle which this process is utilizing in its current execution state.
ipsoProcessTable	1.3.6.1.4.1.94.1.21.1.7.2		not-accessible	A table of all processes currently running on this system.
STR ipsoProductModel	1.3.6.1.4.1.94.1.21.1.10.11	DisplayString	read-only	The product model number of the current system.
ipsoProducts	1.3.6.1.4.1.94.1.21
I32 ipsoSIMMTotal	1.3.6.1.4.1.94.1.21.1.6.1	Integer32	read-only	The total memory capacity in megabytes contained in the SIMM sockets.
ipsoStorageGroup	1.3.6.1.4.1.94.1.21.1.6			A collection of objects providing the instrumentation of ipsoStorage Group
I32 ipsoSysDiskDriveIndex	1.3.6.1.4.1.94.1.21.1.10.13.1.2	Integer32	read-only	The drive index used internally by the system to identify a disk.
ipsoSystem	1.3.6.1.4.1.94.1.21.1			Author: Alan Fransisco Revision 1.02 changed ipsoChassisMBType to DisplayString - 09.11.1998 removed ipsoChassisType - 20.08.1998 removed ipsoFanSpeed - 19.08.1998 removed ipsoCardStorageCapacity and made other corrections - 12.08.1998 Added Nokia Telecommunications header - 03.08.1998
I32 ipsoTotalDiskMirrorSets	1.3.6.1.4.1.94.1.21.1.9.1	Integer32	read-only	The total number of mirror sets currently configured on the system.
nokia	1.3.6.1.4.1.94
nokiaProducts	1.3.6.1.4.1.94.1
NTF systemTrapConfigurationChange	1.3.6.1.4.1.94.1.21.1.8.1.1			The trap which indicates a temporary configuration change.
NTF systemTrapConfigurationFileChange	1.3.6.1.4.1.94.1.21.1.8.1.2			The trap which indicates a change in the configuration file.
NTF systemTrapConfigurationSaveChange	1.3.6.1.4.1.94.1.21.1.8.1.3			The trap which indicates a permanent configuration change which is written to the configuration file.
NTF systemTrapDiskFailure	1.3.6.1.4.1.94.1.21.1.8.1.6			The trap which indicates that a particular disk drive has failed , means giving no response for read/write operation.
NTF systemTrapDiskMirrorSetCreate	1.3.6.1.4.1.94.1.21.1.8.1.7			The trap which indicates that a particular mirror set has been created on the system.
NTF systemTrapDiskMirrorSetDelete	1.3.6.1.4.1.94.1.21.1.8.1.8			The trap which indicates that a particular mirror set has been deleted from the system.
NTF systemTrapDiskMirrorSyncFailure	1.3.6.1.4.1.94.1.21.1.8.1.10			The trap which indicates that a particular mirror set sync has failed.
NTF systemTrapDiskMirrorSyncSuccess	1.3.6.1.4.1.94.1.21.1.8.1.11			The trap which indicates that a particular mirror set sync has succeeded.
NTF systemTrapLicense	1.3.6.1.4.1.94.1.21.1.8.1.16			The trap indicates the product is about to expire/expired. A zero value for the NoOfDays means the product has expired.
NTF systemTrapLowDiskSpace	1.3.6.1.4.1.94.1.21.1.8.1.4			The trap which indicates if the disk space is low.
NTF systemTrapNoDiskSpace	1.3.6.1.4.1.94.1.21.1.8.1.5			The trap which indicates that there is no more disk space available.
systemTraps	1.3.6.1.4.1.94.1.21.1.8.1
NTF systemTrapSnmpProcessShutdown	1.3.6.1.4.1.94.1.21.1.8.1.9			The trap which indicates that the snmp process is going down.

RFC description

Monitors system and hardware resources on Nokia IPSO security appliances including CPU, memory, filesystem, and asset information.

Start monitoring Nokia IP-series security appliances with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NOKIA-IPSO-SYSTEM-MIB