NMS-QOS-PIB-MIB

All MIBs › NMS-QOS-PIB-MIB

Last Updated: 2003-10-16

Category: QoS

Description: Defines NMS Communications QoS Policy Information Base for policy-based traffic classification and marking.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NMS-QOS-PIB-MIB?

NMS-QOS-PIB-MIB is a legacy proprietary MIB (built on NMS-SMI/NMS-TC) implementing the QoS Policy Information Base (PIB, COPS-PR-style) for provisioning QoS policy from a centralized PDP. Its objects cover a PIB-incarnation table (incarnation ID, PDP name, incarnation, TTL), a device-attribute table (PEP domain, primary/secondary PDP, max message size, capabilities), an interface-type table (queue type, roles, capabilities), and a DiffServ-mapping table (DSCP, marked DSCP, Layer 2 CoS). As a configuration MIB it lets an administrator confirm PDP-provisioned QoS policy and DSCP-to-CoS mapping on this device. It is deployed on legacy networking equipment (NMS-SMI vendor line). Engineers can download the NMS-QOS-PIB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NMS-QOS-PIB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

nms Co., Ltd. networking equipment (COPS-PR QoS Policy Information Base, vendor unidentified)

Monitoring Examples

An administrator checks qosDiffServMappingTable to confirm PDP-provisioned DSCP-to-Layer-2-CoS mapping on this legacy NMS-SMI device.

What Can Be Monitored

PIB-provisioned QoS policy and DSCP-to-CoS mapping

Imported Objects

From NMS-SMI

nmsPibToMib

OBJECT-IDENTITY

From NMS-TC

Unsigned32

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
nmsQosPIBMIB	1.3.6.1.4.1.11606.10.18.2.1			The NMS QOS Policy PIB for provisioning QOS policy.
qosPIBConformance	1.3.6.1.4.1.11606.10.18.2.1.1
qosPIBCompliances	1.3.6.1.4.1.11606.10.18.2.1.1.1
qosPIBCompliance	1.3.6.1.4.1.11606.10.18.2.1.1.1.1			The compliance statement for the QOS Policy Derived MIB.
qosPIBGroups	1.3.6.1.4.1.11606.10.18.2.1.1.2
qosDevicePibIncarnationTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.1
qosDeviceAttributeTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.2
qosInterfaceTypeTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.3
qosDiffServMappingTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.4
qosCosToDscpTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.5
qosUnmatchedPolicyTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.6
qosPolicerTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.7
qosAggregateTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.8
qosMacClassificationTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.9
qosIpAceTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.10
qosIpAclDefinitionTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.11
qosIpAclActionTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.12
qosIfSchedulingPreferencesTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.13
qosIfDropPreferenceTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.14
qosIfDscpAssignmentTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.15
qosIfRedTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.16
qosIfTailDropTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.17
qosIfWeightsTableGroup	1.3.6.1.4.1.11606.10.18.2.1.1.2.18
qosDeviceConfig	1.3.6.1.4.1.11606.10.18.2.1.2
qosDevicePibIncarnationTable	1.3.6.1.4.1.11606.10.18.2.1.2.1		not-accessible	This class contains a single policy instance that identifies the current incarnation of the PIB and the PDP that installed this incarnation. The instance of this class is reported to the PDP at client connect time so that the PDP can (attempt to) ascertain the current state of the PIB.
qosDevicePibIncarnationEntry	1.3.6.1.4.1.11606.10.18.2.1.2.1.1		not-accessible	The single policy instance of this class identifies the current incarnation of the PIB and the PDP that installed this incarnation.
POL qosDeviceIncarnationId	1.3.6.1.4.1.11606.10.18.2.1.2.1.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
STR qosDevicePdpName	1.3.6.1.4.1.11606.10.18.2.1.2.1.1.2	DisplayString	read-only	The name of the PDP that installed the current incarnation of the PIB into the device. By default it is the zero length string.
OCT qosDevicePibIncarnation	1.3.6.1.4.1.11606.10.18.2.1.2.1.1.3	OCTET STRING	read-only	An octet string to identify the current incarnation. It has meaning to the PDP that installed the PIB and perhaps its standby PDPs. By default the empty string.
U32 qosDevicePibTtl	1.3.6.1.4.1.11606.10.18.2.1.2.1.1.4	Unsigned32	read-only	The number of seconds after a client close or TCP timeout for which the PEP continues to enforce the policy in the PIB. After this interval, the PIB is consired expired and the device no longer enforces the policy installed in the PIB.
qosDeviceAttributeTable	1.3.6.1.4.1.11606.10.18.2.1.2.2		not-accessible	The single instance of this class indicates specific attributes of the device. These include configuration values such as the configured PDP addresses, the maximum message size, and specific device capabilities. The latter include input port-based and output port-based classification and/or policing, support for flow based policing, aggregate based policing, traffic shaping capabilities, etc.
qosDeviceAttributeEntry	1.3.6.1.4.1.11606.10.18.2.1.2.2.1		not-accessible	The single instance of this class indicates specific attributes of the device.
POL qosDeviceAttributeId	1.3.6.1.4.1.11606.10.18.2.1.2.2.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
STR qosDevicePepDomain	1.3.6.1.4.1.11606.10.18.2.1.2.2.1.2	DisplayString	read-only	The QoS domain that this device belongs to. This is configured locally on the device (perhaps by some management protocol such as SNMP). By default, it is the zero-length string.
IP qosDevicePrimaryPdp	1.3.6.1.4.1.11606.10.18.2.1.2.2.1.3	IpAddress	read-only	The address of the PDP configured to be the primary PDP for the device.
IP qosDeviceSecondaryPdp	1.3.6.1.4.1.11606.10.18.2.1.2.2.1.4	IpAddress	read-only	The address of the PDP configured to be the secondary PDP for the device. An address of zero indicates no secondary is configured.
U32 qosDeviceMaxMessageSize	1.3.6.1.4.1.11606.10.18.2.1.2.2.1.5	Unsigned32	read-only	The maximum size message that this PEP is capable of receiving in bytes. A value of zero means that the maximum message size is unspecified (but does not mean it is unlimited). A message greater than this maximum results in a MessageTooBig error on a 'no commit' REP.
BIT qosDeviceCapabilities	1.3.6.1.4.1.11606.10.18.2.1.2.2.1.6	Bits	read-only	An enumeration of device capabilities. Used by the PDP to select policies and configuration to push to the PEP.
qosInterfaceTypeTable	1.3.6.1.4.1.11606.10.18.2.1.2.3		not-accessible	This class describes the interface types of the interfaces that exist on the device. It includes the queue type, role combination and capabilities of interfaces. The PEP does not report which specific interfaces have which characteristics.
qosInterfaceTypeEntry	1.3.6.1.4.1.11606.10.18.2.1.2.3.1		not-accessible	An instance of this class describes a role combination for an interface type of an interface that exists on the device.
POL qosInterfaceTypeId	1.3.6.1.4.1.11606.10.18.2.1.2.3.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
NUM qosInterfaceQueueType	1.3.6.1.4.1.11606.10.18.2.1.2.3.1.2	QosInterfaceQueueType	read-only	The interface type in terms of number of queues and thresholds.
ROL qosInterfaceTypeRoles	1.3.6.1.4.1.11606.10.18.2.1.2.3.1.3	RoleCombination	read-only	A combination of roles on at least one interface of type qosInterfaceType.
NUM qosInterfaceTypeCapabilities	1.3.6.1.4.1.11606.10.18.2.1.2.3.1.4	QosInterfaceTypeCapabilities	read-only	An enumeration of interface capabilities. Used by the PDP to select policies and configuration to push to the PEP.
qosDomainConfig	1.3.6.1.4.1.11606.10.18.2.1.3
qosDiffServMappingTable	1.3.6.1.4.1.11606.10.18.2.1.3.1		not-accessible	Maps each DSCP to a marked-down DSCP. Also maps each DSCP to an IP precedence and QosLayer2Cos. When configured for the first time, all 64 entries of the table must be specified. Thereafter, instances may be modified (with a delete and install in a single decision) but not deleted unless all instances are deleted.
qosDiffServMappingEntry	1.3.6.1.4.1.11606.10.18.2.1.3.1.1		not-accessible	An instance of this class represents mappings from a DSCP.
DSC qosDscp	1.3.6.1.4.1.11606.10.18.2.1.3.1.1.1	Dscp	not-accessible	A DSCP for which this entry contains mappings.
DSC qosMarkedDscp	1.3.6.1.4.1.11606.10.18.2.1.3.1.1.2	Dscp	read-only	The DSCP to use instead of the qosDscp when the packet is out of profile and hence marked as such.
QOS qosL2Cos	1.3.6.1.4.1.11606.10.18.2.1.3.1.1.3	QosLayer2Cos	read-only	The L2 CoS value to use when mapping this DSCP to layer 2 CoS.
qosCosToDscpTable	1.3.6.1.4.1.11606.10.18.2.1.3.2		not-accessible	Maps each of eight CoS values to a DSCP. When configured for the first time, all 8 entries of the table must be specified. Thereafter, instances may be modified (with a delete and install in a single decision) but not deleted unless all instances are deleted.
qosCosToDscpEntry	1.3.6.1.4.1.11606.10.18.2.1.3.2.1		not-accessible	An instance of this class maps a CoS value to a DSCP.
QOS qosCosToDscpCos	1.3.6.1.4.1.11606.10.18.2.1.3.2.1.1	QosLayer2Cos	not-accessible	The L2 CoS value that is being mapped.
DSC qosCosToDscpDscp	1.3.6.1.4.1.11606.10.18.2.1.3.2.1.2	Dscp	read-only	The DSCP value to use when mapping the L2 CoS to a DSCP.
qosUnmatchedPolicy	1.3.6.1.4.1.11606.10.18.2.1.4
qosUnmatchedPolicyTable	1.3.6.1.4.1.11606.10.18.2.1.4.1		not-accessible	A policy class that specifies what QoS to apply to a packet that does not match any other policy configured for this role combination for a particular direction of traffic.
qosUnmatchedPolicyEntry	1.3.6.1.4.1.11606.10.18.2.1.4.1.1		not-accessible	An instance of this class specifies the unmatched policy for a particular role combination for incoming or outgoing traffic.
POL qosUnmatchedPolicyId	1.3.6.1.4.1.11606.10.18.2.1.4.1.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
ROL qosUnmatchedPolicyRole	1.3.6.1.4.1.11606.10.18.2.1.4.1.1.2	RoleCombination	read-only	Role combination for which this instance applies.
INT qosUnmatchedPolicyDirection	1.3.6.1.4.1.11606.10.18.2.1.4.1.1.3	INTEGER	read-only	The direction of packet flow at the interface in question to which this instance applies.
DSC qosUnmatchedPolicyDscp	1.3.6.1.4.1.11606.10.18.2.1.4.1.1.4	Dscp	read-only	The DSCP to classify the unmatched packet with. This must be specified even if qosUnmatchedPolicyDscpTrusted is true.
T/F qosUnmatchedPolicyDscpTrusted	1.3.6.1.4.1.11606.10.18.2.1.4.1.1.5	TruthValue	read-only	If this attribute is true, then the Dscp associated with the packet is trusted, i.e., it is assumed to have already been set. In this case, the Dscp is not rewritten with qosUnmatchedPolicyDscp (qosUnmatchedPolicyDscp is ignored) unless this is a non-IP packet and arrives untagged. The packet is still policed as part of its micro flow and its aggregate flow. When a trusted action is applied to an input interface, the Dscp (for an IP packet) or CoS (for a non-IP packet) associated with the packet is the one contained in the packet. When a trusted action is applied to an output interface, the Dscp associated with the packet is the one that is the result of the input classification and policing.
POL qosUnmatchPolMicroFlowPolicerId	1.3.6.1.4.1.11606.10.18.2.1.4.1.1.6	PolicyInstanceId	read-only	An index identifying the instance of policer to apply to unmatched packets. It must correspond to the integer index of an instance of class qosPolicerTable or be zero. If zero, the microflow is not policed.
POL qosUnmatchedPolicyAggregateId	1.3.6.1.4.1.11606.10.18.2.1.4.1.1.7	PolicyInstanceId	read-only	An index identifying the aggregate that the packet belongs to. It must correspond to the integer index of an instance of class qosAggregateTable or be zero. If zero, the microflow does not belong to any aggregate and is not policed as part of any aggregate.
qosPolicer	1.3.6.1.4.1.11606.10.18.2.1.5
qosPolicerTable	1.3.6.1.4.1.11606.10.18.2.1.5.1		not-accessible	A class specifying policing parameters for both microflows and aggregate flows. This table is designed for policing according to a token bucket scheme where an average rate and burst size is specified.
qosPolicerEntry	1.3.6.1.4.1.11606.10.18.2.1.5.1.1		not-accessible	An instance of this class specifies a set of policing parameters.
POL qosPolicerId	1.3.6.1.4.1.11606.10.18.2.1.5.1.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
UNS qosPolicerRate	1.3.6.1.4.1.11606.10.18.2.1.5.1.1.2	Unsigned64	read-only	The token rate. It is specified in units of bit/s. A rate of zero means that all packets will be out of profile. If the qosPolicerAction is set to drop then this effectively denies any service to packets policed by this policer.
U32 qosPolicerNormalBurst	1.3.6.1.4.1.11606.10.18.2.1.5.1.1.3	Unsigned32	read-only	The normal size of a burst in terms of bits.
U32 qosPolicerExcessBurst	1.3.6.1.4.1.11606.10.18.2.1.5.1.1.4	Unsigned32	read-only	The excess size of a burst in terms of bits.
INT qosPolicerAction	1.3.6.1.4.1.11606.10.18.2.1.5.1.1.5	INTEGER	read-only	An indication of how to handle out of profile packets. When the shape action is chosen then traffic is shaped to the rate specified by qosPolicerRate.
qosAggregateTable	1.3.6.1.4.1.11606.10.18.2.1.5.2		not-accessible	Instances of this class identify aggregate flows and the policer to apply to each.
qosAggregateEntry	1.3.6.1.4.1.11606.10.18.2.1.5.2.1		not-accessible	An instance of this class specifies the policer to apply to an aggregate flow.
POL qosAggregateId	1.3.6.1.4.1.11606.10.18.2.1.5.2.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
POL qosAggregatePolicerId	1.3.6.1.4.1.11606.10.18.2.1.5.2.1.2	PolicyInstanceId	read-only	An index identifying the instance of policer to apply to the aggregate. It must correspond to the integer index of an instance of class qosPolicerTable.
qosMacQos	1.3.6.1.4.1.11606.10.18.2.1.6
qosMacClassificationTable	1.3.6.1.4.1.11606.10.18.2.1.6.1		not-accessible	A class of MAC/Vlan tuples and their associated CoS values.
qosMacClassificationEntry	1.3.6.1.4.1.11606.10.18.2.1.6.1.1		not-accessible	An instance of this class specifies the mapping of a VLAN and a MAC address to a CoS value.
POL qosMacClassificationId	1.3.6.1.4.1.11606.10.18.2.1.6.1.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
INT qosDstMacVlan	1.3.6.1.4.1.11606.10.18.2.1.6.1.1.2	INTEGER	read-only	The VLAN of the destination MAC address of the L2 frame.
MAC qosDstMacAddress	1.3.6.1.4.1.11606.10.18.2.1.6.1.1.3	MacAddress	read-only	The destination MAC address of the L2 frame.
QOS qosDstMacCos	1.3.6.1.4.1.11606.10.18.2.1.6.1.1.4	QosLayer2Cos	read-only	The CoS to assign the packet with the associated MAC/VLAN tuple. Note that this CoS is overridden by the policies to classify the frame at layer 3 if there are any.
qosIpQos	1.3.6.1.4.1.11606.10.18.2.1.7
qosIpAceTable	1.3.6.1.4.1.11606.10.18.2.1.7.1		not-accessible	ACE definitions.
qosIpAceEntry	1.3.6.1.4.1.11606.10.18.2.1.7.1.1		not-accessible	An instance of this class specifies an ACE.
POL qosIpAceId	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
IP qosIpAceDstAddr	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.2	IpAddress	read-only	The IP address to match against the packet's destination IP address.
IP qosIpAceDstAddrMask	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.3	IpAddress	read-only	A mask for the matching of the destination IP address.
IP qosIpAceSrcAddr	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.4	IpAddress	read-only	The IP address to match against the packet's source IP address.
IP qosIpAceSrcAddrMask	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.5	IpAddress	read-only	A mask for the matching of the source IP address.
DSC qosIpAceDscpMin	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.6	Dscp	read-only	The minimum value that the DSCP in the packet can have and match this ACE.
DSC qosIpAceDscpMax	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.7	Dscp	read-only	The maximum value that the DSCP in the packet can have and match this ACE.
INT qosIpAceProtocol	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.8	INTEGER	read-only	The IP protocol to match against the packet's protocol. A value of zero means match all.
INT qosIpAceDstL4PortMin	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.9	INTEGER	read-only	The minimum value that the packet's layer 4 dest port number can have and match this ACE.
INT qosIpAceDstL4PortMax	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.10	INTEGER	read-only	The maximum value that the packet's layer 4 dest port number can have and match this ACE.
INT qosIpAceSrcL4PortMin	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.11	INTEGER	read-only	The minimum value that the packet's layer 4 source port number can have and match this ACE.
INT qosIpAceSrcL4PortMax	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.12	INTEGER	read-only	The maximum value that the packet's layer 4 source port number can have and match this ACE.
T/F qosIpAcePermit	1.3.6.1.4.1.11606.10.18.2.1.7.1.1.13	TruthValue	read-only	If the packet matches this ACE and the value of this attribute is true, then the matching process terminates and the QoS associated with this ACE (indirectly through the ACL) is applied to the packet. If the value of this attribute is false, then no more ACEs in this ACL are compared to this packet and matching continues with the first ACE of the next ACL.
qosIpAclDefinitionTable	1.3.6.1.4.1.11606.10.18.2.1.7.2		not-accessible	A class that defines a set of ACLs each being an ordered list of ACEs.
qosIpAclDefinitionEntry	1.3.6.1.4.1.11606.10.18.2.1.7.2.1		not-accessible	An instance of this class specifies an ACE in an ACL and its order with respect to other ACEs in the same ACL.
POL qosIpAclDefinitionId	1.3.6.1.4.1.11606.10.18.2.1.7.2.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
POL qosIpAclId	1.3.6.1.4.1.11606.10.18.2.1.7.2.1.2	PolicyInstanceId	read-only	An index for this ACL. There will be one instance of policy class qosIpAclDefinition with this integer index for each ACE in the ACL per role combination.
U32 qosIpAceOrder	1.3.6.1.4.1.11606.10.18.2.1.7.2.1.3	Unsigned32	read-only	An integer that determines the position of this ACE in the ACL. An ACE with a given order is positioned in the access contol list before one with a higher order.
POL qosIpAclDefAceId	1.3.6.1.4.1.11606.10.18.2.1.7.2.1.4	PolicyInstanceId	read-only	This attribute specifies the ACE in the qosIpAceTable that is in the ACL specified by qosIpAclId at the position specified by qosIpAceOrder.
qosIpAclActionTable	1.3.6.1.4.1.11606.10.18.2.1.7.3		not-accessible	A class that applies a set of ACLs to interfaces specifying, for each interface the order of the ACL with respect to other ACLs applied to the same interface and, for each ACL the action to take for a packet that matches a permit ACE in that ACL. Interfaces are specified abstractly in terms of interface role combinations.
qosIpAclActionEntry	1.3.6.1.4.1.11606.10.18.2.1.7.3.1		not-accessible	An instance of this class applies an ACL to traffic in a particular direction on an interface with a particular role combination, and specifies the action for packets which match the ACL.
POL qosIpAclActionId	1.3.6.1.4.1.11606.10.18.2.1.7.3.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
POL qosIpAclActAclId	1.3.6.1.4.1.11606.10.18.2.1.7.3.1.2	PolicyInstanceId	read-only	The ACL associated with this action.
ROL qosIpAclInterfaceRoles	1.3.6.1.4.1.11606.10.18.2.1.7.3.1.3	RoleCombination	read-only	The interfaces to which this ACL applies specified in terms of a set of roles.
INT qosIpAclInterfaceDirection	1.3.6.1.4.1.11606.10.18.2.1.7.3.1.4	INTEGER	read-only	The direction of packet flow at the interface in question to which this ACL applies.
U32 qosIpAclOrder	1.3.6.1.4.1.11606.10.18.2.1.7.3.1.5	Unsigned32	read-only	An integer that determines the order of this ACL in the list of ACLs applied to interfaces of the specified role combination. An ACL with a given order is positioned in the list before one with a higher order.
DSC qosIpAclDscp	1.3.6.1.4.1.11606.10.18.2.1.7.3.1.6	Dscp	read-only	The DSCP to classify the packet with in the event that the packet matches an ACE in this ACL and the ACE is a permit.
T/F qosIpAclDscpTrusted	1.3.6.1.4.1.11606.10.18.2.1.7.3.1.7	TruthValue	read-only	If this attribute is true, then the Dscp associated with the packet is trusted, i.e., it is assumed to have already been set. In this case, the Dscp is not rewritten with qosIpAclDscp (qosIpAclDscp is ignored). The packet is still policed as part of its micro flow and its aggregate flow. When a trusted action is applied to an input interface, the Dscp associated with the packet is the one contained in the packet. When a trusted action is applied to an output interface, the Dscp associated with the packet is the one that is the result of the input classification and policing.
POL qosIpAclMicroFlowPolicerId	1.3.6.1.4.1.11606.10.18.2.1.7.3.1.8	PolicyInstanceId	read-only	An index identifying the instance of policer to apply to the microflow. It must correspond to the integer index of an instance of class qosPolicerTableor be zero. If zero, the microflow is not policed.
POL qosIpAclAggregateId	1.3.6.1.4.1.11606.10.18.2.1.7.3.1.9	PolicyInstanceId	read-only	An index identifying the aggregate that the packet belongs to. It must correspond to the integer index of an instance of class qosAggregateTable or be zero. If zero, the microflow does not belong to any aggregate and is not policed as part of any aggregate.
qosIfParameters	1.3.6.1.4.1.11606.10.18.2.1.8
qosIfSchedulingPreferencesTable	1.3.6.1.4.1.11606.10.18.2.1.8.1		not-accessible	This class specifies the scheduling preference an interface chooses if it supports multiple scheduling types. Higher values are preferred over lower values.
qosIfSchedulingPreferenceEntry	1.3.6.1.4.1.11606.10.18.2.1.8.1.1		not-accessible	An instance of this class specifies a scheduling preference for a queue-type on an interface with a particular role combination.
POL qosIfSchedulingPreferenceId	1.3.6.1.4.1.11606.10.18.2.1.8.1.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
ROL qosIfSchedulingRoles	1.3.6.1.4.1.11606.10.18.2.1.8.1.1.2	RoleCombination	read-only	The combination of roles the interface must have for this policy instance to apply to that interface.
INT qosIfSchedulingPreference	1.3.6.1.4.1.11606.10.18.2.1.8.1.1.3	INTEGER	read-only	The preference to use this scheduling discipline and queue type. A higher value means a higher preference. If two disciplines have the same preference the choice is a local decision.
INT qosIfSchedulingDiscipline	1.3.6.1.4.1.11606.10.18.2.1.8.1.1.4	INTEGER	read-only	An enumerate type for all the known scheduling disciplines.
NUM qosIfSchedulingQueueType	1.3.6.1.4.1.11606.10.18.2.1.8.1.1.5	QosInterfaceQueueType	read-only	The queue type of this preference.
qosIfDropPreferenceTable	1.3.6.1.4.1.11606.10.18.2.1.8.2		not-accessible	This class specifies the preference of the drop mechanism an interface chooses if it supports multiple drop mechanisms. Higher values are preferred over lower values.
qosIfDropPreferenceEntry	1.3.6.1.4.1.11606.10.18.2.1.8.2.1		not-accessible	An instance of this class specifies a drop preference for a drop mechanism on an interface with a particular role combination.
POL qosIfDropPreferenceId	1.3.6.1.4.1.11606.10.18.2.1.8.2.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
ROL qosIfDropRoles	1.3.6.1.4.1.11606.10.18.2.1.8.2.1.2	RoleCombination	read-only	The combination of roles the interface must have for this policy instance to apply to that interface.
INT qosIfDropPreference	1.3.6.1.4.1.11606.10.18.2.1.8.2.1.3	INTEGER	read-only	The preference to use this drop mechanism. A higher value means a higher preference. If two mechanisms have the same preference the choice is a local decision.
INT qosIfDropDiscipline	1.3.6.1.4.1.11606.10.18.2.1.8.2.1.4	INTEGER	read-only	An enumerate type for all the known drop mechanisms.
qosIfDscpAssignmentTable	1.3.6.1.4.1.11606.10.18.2.1.8.3		not-accessible	The assignment of each DSCP to a queue and threshold for each interface queue type.
qosIfDscpAssignmentEntry	1.3.6.1.4.1.11606.10.18.2.1.8.3.1		not-accessible	An instance of this class specifies the queue and threshold set for a packet with a particular DSCP on an interface of a particular type with a particular role combination.
POL qosIfDscpAssignmentId	1.3.6.1.4.1.11606.10.18.2.1.8.3.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
ROL qosIfDscpRoles	1.3.6.1.4.1.11606.10.18.2.1.8.3.1.2	RoleCombination	read-only	The role combination the interface must be configured with.
NUM qosIfQueueType	1.3.6.1.4.1.11606.10.18.2.1.8.3.1.3	QosInterfaceQueueType	read-only	The interface queue type to which this row applies.
DSC qosIfDscp	1.3.6.1.4.1.11606.10.18.2.1.8.3.1.4	Dscp	read-only	The DSCP to which this row applies.
INT qosIfQueue	1.3.6.1.4.1.11606.10.18.2.1.8.3.1.5	INTEGER	read-only	The queue to which the DSCP applies for the given interface type.
INT qosIfThresholdSet	1.3.6.1.4.1.11606.10.18.2.1.8.3.1.6	INTEGER	read-only	The threshold set of the specified queue to which the DSCP applies for the given interface type.
qosIfRedTable	1.3.6.1.4.1.11606.10.18.2.1.8.4		not-accessible	A class of lower and upper values for each threshold set in a queue supporting WRED. If the size of the queue for a given threshold is below the lower value then packets assigned to that threshold are always accepted into the queue. If the size of the queue is above upper value then packets are always dropped. If the size of the queue is between the lower and the upper then packets are randomly dropped.
qosIfRedEntry	1.3.6.1.4.1.11606.10.18.2.1.8.4.1		not-accessible	An instance of this class specifies threshold limits for a particular RED threshold of a given threshold set on an interface and with a particular role combination.
POL qosIfRedId	1.3.6.1.4.1.11606.10.18.2.1.8.4.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
ROL qosIfRedRoles	1.3.6.1.4.1.11606.10.18.2.1.8.4.1.2	RoleCombination	read-only	The role combination the interface must be configured with.
THR qosIfRedNumThresholdSets	1.3.6.1.4.1.11606.10.18.2.1.8.4.1.3	ThresholdSetRange	read-only	The values in this entry apply only to queues with the number of thresholds specified by this attribute.
INT qosIfRedThresholdSet	1.3.6.1.4.1.11606.10.18.2.1.8.4.1.4	INTEGER	read-only	The threshold set to which the lower and upper values apply. It must be in the range 1 through qosIfRedNumThresholdSets. There must be exactly one PRI for each value in this range.
PER qosIfRedThresholdSetLower	1.3.6.1.4.1.11606.10.18.2.1.8.4.1.5	Percent	read-only	The threshold value below which no packets are dropped.
PER qosIfRedThresholdSetUpper	1.3.6.1.4.1.11606.10.18.2.1.8.4.1.6	Percent	read-only	The threshold value above which all packets are dropped.
qosIfTailDropTable	1.3.6.1.4.1.11606.10.18.2.1.8.5		not-accessible	A class for threshold sets in a queue supporting tail drop. If the size of the queue for a given threshold set is at or below the specified value then packets assigned to that threshold set are always accepted into the queue. If the size of the queue is above the specified value then packets are always dropped.
qosIfTailDropEntry	1.3.6.1.4.1.11606.10.18.2.1.8.5.1		not-accessible	An instance of this class specifies the queue depth for a particular tail-drop threshold set on an interface with a particular role combination.
POL qosIfTailDropId	1.3.6.1.4.1.11606.10.18.2.1.8.5.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
ROL qosIfTailDropRoles	1.3.6.1.4.1.11606.10.18.2.1.8.5.1.2	RoleCombination	read-only	The role combination the interface must be configured with.
THR qosIfTailDropNumThresholdSets	1.3.6.1.4.1.11606.10.18.2.1.8.5.1.3	ThresholdSetRange	read-only	The value in this entry applies only to queues with the number of thresholds specified by this attribute.
INT qosIfTailDropThresholdSet	1.3.6.1.4.1.11606.10.18.2.1.8.5.1.4	INTEGER	read-only	The threshold set to which the threshold value applies
PER qosIfTailDropThresholdSetValue	1.3.6.1.4.1.11606.10.18.2.1.8.5.1.5	Percent	read-only	The threshold value above which packets are dropped.
qosIfWeightsTable	1.3.6.1.4.1.11606.10.18.2.1.8.6		not-accessible	A class of scheduling weights for each queue of an interface that supports weighted round robin scheduling or a mix of priority queueing and weighted round robin. For a queue with N priority queues, the N highest queue numbers are the priority queues with the highest queue number having the highest priority. WRR is applied to the non-priority queues.
qosIfWeightsEntry	1.3.6.1.4.1.11606.10.18.2.1.8.6.1		not-accessible	An instance of this class specifies the scheduling weight for a particular queue of an interface with a particular number of queues and with a particular role combination.
POL qosIfWeightsId	1.3.6.1.4.1.11606.10.18.2.1.8.6.1.1	PolicyInstanceId	not-accessible	An integer index to identify the instance of the policy class.
ROL qosIfWeightsRoles	1.3.6.1.4.1.11606.10.18.2.1.8.6.1.2	RoleCombination	read-only	The role combination the interface must be configured with.
QUE qosIfWeightsNumQueues	1.3.6.1.4.1.11606.10.18.2.1.8.6.1.3	QueueRange	read-only	The value of the weight in this instance applies only to interfaces with the number of queues specified by this attribute.
INT qosIfWeightsQueue	1.3.6.1.4.1.11606.10.18.2.1.8.6.1.4	INTEGER	read-only	The queue to which the weight applies.
U32 qosIfWeightsDrainSize	1.3.6.1.4.1.11606.10.18.2.1.8.6.1.5	Unsigned32	read-only	The maximum number of bytes that may be drained from the queue in one cycle. The percentage of the bandwith allocated to this queue can be calculated from this attribute and the sum of the drain sizes of all the non-priority queues of the interface.
U32 qosIfWeightsQueueSize	1.3.6.1.4.1.11606.10.18.2.1.8.6.1.6	Unsigned32	read-only	The size of the queue in bytes. Some devices set queue size in terms of packets. These devices must calculate the queue size in packets by assuming an average packet size suitable for the particular interface. Some devices have a fixed size buffer to be shared among all queues. These devices must allocate a fraction of the total buffer space to this queue calculated as the the ratio of the queue size to the sum of the queue sizes for the interface.

RFC description

Defines policy information base for QoS provisioning and management with DiffServ codepoint and Layer 2 CoS support.

Start monitoring nms Co., Ltd. networking equipment (COPS-PR QoS Policy Information Base, vendor unidentified) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NMS-QOS-PIB-MIB

What Is NMS-QOS-PIB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description