NETSWITCH-DRIVERS-MIB

All MIBs › NETSWITCH-DRIVERS-MIB

Category: Switch Management

Description: Monitors driver-level statistics and hardware interface state for NetSwitch network adapter modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETSWITCH-DRIVERS-MIB?

NETSWITCH-DRIVERS-MIB is described as monitoring driver-level statistics and hardware interface state for NetSwitch network adapter modules, though no module description text or sample objects were available to ground further detail. Based on its name and short description, it would generally expose low-level network interface driver counters and hardware link/interface state for switch or adapter modules. Its intended monitoring value would be hardware status-oriented, covering interface up/down state and driver-level error/statistics counters, though the specific object names cannot be confirmed from the available data. It likely complements the standard IF-MIB for interface-level detail given its focus on interface state. It would be deployed on NetSwitch-branded network switching/adapter hardware. Engineers can download the NETSWITCH-DRIVERS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETSWITCH-DRIVERS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NetSwitch network adapter/switch module

Monitoring Examples

No sample objects or module description text were provided for this MIB, so no concrete object names can be honestly cited; a realistic monitoring scenario cannot be constructed without inventing plausible-sounding but unverified object names.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
hp	1.3.6.1.4.1.11
nm	1.3.6.1.4.1.11.2
icf	1.3.6.1.4.1.11.2.14
hpicfObjects	1.3.6.1.4.1.11.2.14.11
hpicfSwitch	1.3.6.1.4.1.11.2.14.11.5
hpSwitch	1.3.6.1.4.1.11.2.14.11.5.1
hpOpSystem	1.3.6.1.4.1.11.2.14.11.5.1.1
hpHwSystem	1.3.6.1.4.1.11.2.14.11.5.1.2
hpDriverStats	1.3.6.1.4.1.11.2.14.11.5.1.2.3
hpDriverStatsTable	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1		not-accessible	A list of driver entries.
hpDriverStatsEntry	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1		not-accessible	A driver entry containing information common to all drivers.
INT hpDriverStatsIndex	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.1	INTEGER	read-only	A unique value for each driver. The value for each driver must remain constant at least from one re- initialization of the entity's network management system to the next re-initialization.
OCT hpDriverStatsType	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.2	OCTET STRING	read-only	Type of driver, FDDI, ATM, SPITFIRE, etc.
INT hpDriverStatsOctetsRxOk	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.3	INTEGER	read-only	The number of octets received by the driver including the FCS but not including framing bits.
INT hpDriverStatsFrameRxOk	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.4	INTEGER	read-only	The number of frames received by the driver.
INT hpDriverStatsTotalRxError	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.5	INTEGER	read-only	The total number of receive errors.
INT hpDriverStatsOctetTxOk	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.6	INTEGER	read-only	The number of octets transmitted by the driver including the FCS but not including framing bits.
INT hpDriverStatsFrameTxOk	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.7	INTEGER	read-only	The number of frames transmitted by the driver.
INT hpDriverStatsTotalTxError	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.8	INTEGER	read-only	The total number of transmit errors.
INT hpDriverStatsOctetsRxPerSec	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.9	INTEGER	read-only	The number of octets received by the driver during the previous one second sample period.
INT hpDriverStatsPeakOctetsRx	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.10	INTEGER	read-only	The highest number of octets received by the driver during one second sample periods.
INT hpDriverStatsFramesRxPerSec	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.11	INTEGER	read-only	The number of frames received by the driver during the previous one second sample period.
INT hpDriverStatsPeakFramesRx	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.12	INTEGER	read-only	The highest number of frames received by the driver during one second sample periods.
INT hpDriverStatsOctetsTxPerSec	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.13	INTEGER	read-only	The number of octets transmitted by the driver during the previous one second sample period.
INT hpDriverStatsPeakOctetsTx	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.14	INTEGER	read-only	The highest number of octets transmitted by the driver during one second sample periods.
INT hpDriverStatsFramesTxPerSec	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.15	INTEGER	read-only	The number of frames transmitted by the driver during the previous one second sample period
INT hpDriverStatsPeakFramesTx	1.3.6.1.4.1.11.2.14.11.5.1.2.3.1.1.16	INTEGER	read-only	The highest number of frames transmitted by the driver during one second sample periods.
hpFddiDriverStatsTable	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2		not-accessible	A list of FDDI driver entries.
hpFddiDriverStatsEntry	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1		not-accessible	A FDDI driver entry containing information common to a given driver.
INT hpFddiDriverStatsIndex	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.1	INTEGER	read-only	A unique value for each driver. The value for each driver must remain constant at least from one re- initialization of the entity's network management system to the next re-initialization.
INT hpFddiDriverStatsSMTOctetsRxOk	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.2	INTEGER	read-only	The number of SMT octets received by the driver including the FCS but not including framing bits.
INT hpFddiDriverStatsSMTFrameRxOk	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.3	INTEGER	read-only	The number of SMT frames received by the driver.
INT hpFddiDriverStatsSMTOctetsTxOk	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.4	INTEGER	read-only	The number of SMT octets transmitted by the driver including the FCS but not including framing bits.
INT hpFddiDriverStatsSMTFrameTxOk	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.5	INTEGER	read-only	The number of SMT frames transmitted by the driver.
INT hpFddiDriverStatsErrRxCRC	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.6	INTEGER	read-only	The number of received frames containing a CRC error detected by the FDDI network interface chip.
INT hpFddiDriverStatsErrRxOverrun	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.7	INTEGER	read-only	The number of received frames that are invalid due to overrun conditions in the FSI of the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrRxParity	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.8	INTEGER	read-only	The number of received frames containing a parity error detected by the FDDI network interface chip.
INT hpFddiDriverStatsErrRxMACStatus	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.9	INTEGER	read-only	The number of received frames generating MAC status errors in the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrTxAbort	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.10	INTEGER	read-only	The number of transmit frames that were aborted by the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrTxUnderrun	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.11	INTEGER	read-only	The number of transmit frames that were aborted due to underrun errors in the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrTxParity	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.12	INTEGER	read-only	The number of transmit frames that were aborted due to parity errors in the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrGsrLlcTxRer	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.13	INTEGER	read-only	The number of LLC transmit ring errors detected by the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrGsrLlcRxRer	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.14	INTEGER	read-only	The number of LLC receive ring errors detected by the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrGsrSMTTxRer	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.15	INTEGER	read-only	The number of SMT transmit ring errors detected by the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrGsrSMTRxRer	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.16	INTEGER	read-only	The number of SMT receive ring errors detected by the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrGsrPortOp	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.17	INTEGER	read-only	The number of port operation errors detected by the FSI of the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrGsrLlcRxRov	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.18	INTEGER	read-only	The number of LLC receive overrun condition detected by the FSI of the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrGsrSMTRxRov	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.19	INTEGER	read-only	The number of SMT receive overrun condition detected by the FSI of the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsErrGsrInternalOp	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.20	INTEGER	read-only	The number of internal operation errors detected by the FSI of the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsIoeMov	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.21	INTEGER	read-only	The number of memory overrun conditions that the FSI has detected in MC68840 FDDI network interface chip. The internal operation error count will also be incremented under this condition.
INT hpFddiDriverStatsErrGsrHost	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.22	INTEGER	read-only	The number of host errors detected by the FSI of the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsTxCongestion	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.23	INTEGER	read-only	The number of transmit packets dropped due to insufficient space on the FDDI driver transmit ring.
INT hpFddiDriverStatsMissedCmd	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.24	INTEGER	read-only	The number of FSI commands that did not execute properly in the MC68840 FDDI network interface chip.
INT hpFddiDriverStatsMissedCRF	1.3.6.1.4.1.11.2.14.11.5.1.2.3.2.1.25	INTEGER	read-only	The number of FSI commands that could not be issued because of an unavailable command register in the MC68840 FDDI network interface chip.

RFC description

HP switch port driver statistics for FDDI, ATM, and Ethernet interfaces.

Start monitoring HP NetSwitch network adapter/switch module (driver-level interface state) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETSWITCH-DRIVERS-MIB

What Is NETSWITCH-DRIVERS-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description