NETGEAR-FIPSNOOPING-MIB

All MIBs › NETGEAR-FIPSNOOPING-MIB

Organization: Netgear Inc

Last Updated: 2011-04-20

Category: Security

Description: Monitors and controls FIPS (Filtering IP Source) snooping to prevent IP spoofing on Netgear managed switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is NETGEAR-FIPSNOOPING-MIB?

NETGEAR-FIPSNOOPING-MIB is a Netgear FASTPATH private MIB implementing FIP (FCoE Initialization Protocol) Snooping, a Fibre Channel over Ethernet (FCoE) security feature defined by the T11 FCoE standard, used on Netgear data-center switches. It exposes an admin/operational mode configuration object for the feature, a statistics-clear control, and per-VLAN and per-interface FCoE session statistics tables. It functions primarily as a network-security and protocol-health monitoring MIB: agentFIPSnoopingAdminMode reports whether the feature is enabled, and the VLAN/interface statistics tables reveal FCoE session activity, letting an administrator confirm the snooping feature and the FCoE sessions it tracks are behaving as expected - a software/protocol-state check rather than a physical-sensor one. It is explicitly built on the T11 FC-BB-5 FCoE/FIP standard referenced directly in its module description, and complements Netgear's other FASTPATH switch MIBs. It is deployed on Netgear FASTPATH data-center switches acting as FCF-facing or FCF-connected devices, and administrators can download the NETGEAR-FIPSNOOPING-MIB file to secure and monitor FCoE traffic on these switches.

IPNetwork Monitor allows you to monitor SNMP objects defined in NETGEAR-FIPSNOOPING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear FASTPATH-based data-center switch (FCoE-capable)

Monitoring Examples

agentFIPSnoopingVlanStatisticsTable/agentFIPSnoopingVlanStatsEntry and agentFIPSnoopingIntfStatisticsTable/agentFIPSnoopingIntfStatsEntry expose per-VLAN and per-interface FCoE session counters, while agentFIPSnoopingAdminMode reports the feature's global enable state. An administrator polling agentFIPSnoopingIntfStatisticsTable on an FCF-facing port who sees an unexpected spike or drop in snooped FIP session counts can infer a rogue FCoE endpoint or a misconfigured FCF connection on that port. agentFIPSnoopingStatsClear lets them reset the counters to establish a clean baseline after remediation.

What Can Be Monitored

FIP snooping admin mode
per-VLAN FCoE session statistics
per-interface FCoE session statistics
port role/FC-MAP configuration

Imported Objects

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero
ifIndex	OBJECT-TYPE

From Q-BRIDGE-MIB

VlanIndex
dot1qVlanIndex	OBJECT-TYPE

From QUANTA-LB6M-REF-MIB

lb6m	OBJECT-IDENTITY

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
MacAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using agentFIPSnoopingVlanVlanRequests OID:

Select a Netgear FASTPATH-based data-center switch (FCoE FIP Snooping) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type agentFIPSnoopingVlanVlanRequests into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of VLAN Request messages received on the VLAN. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathFIPSnooping	1.3.6.1.4.1.4526.10.57			The Netgear Private MIB for FastPath FIP Snooping feature. This MIB module is for configuring FIP snooping related objects and monitoring related FCoE sessions. Terminologies used in this MIB are defined by the T11 FCoE standard. Refer to www.t11.org. This MIB also supports configuration of the following objects: - Port role configuration to identify FCF facing or FCF connected interface - FC-MAP value used by the FCF operating in FPMA mode
agentFIPSnoopingCfgGroup	1.3.6.1.4.1.4526.10.57.1
INT agentFIPSnoopingAdminMode	1.3.6.1.4.1.4526.10.57.1.1	INTEGER	read-write	This enables or disables FIP Snooping on the system.
agentFIPSnoopingVlanCfgTable	1.3.6.1.4.1.4526.10.57.1.2		not-accessible	A table of the FIP Snooping Vlan configuration entries.
agentFIPSnoopingVlanCfgEntry	1.3.6.1.4.1.4526.10.57.1.2.1		not-accessible	Represents entry for a FIP Snooping Vlan.
INT agentFIPSnoopingVlanAdminMode	1.3.6.1.4.1.4526.10.57.1.2.1.1	INTEGER	read-write	This enables or disables FIP Snooping on a selected Vlan interface.
OCT agentFIPSnoopingVlanFCMAP	1.3.6.1.4.1.4526.10.57.1.2.1.2	OCTET STRING	read-write	This object configures the FC-MAP value associated with the FIP snooping Vlan. Default value is 0x0EFC00.
INT agentFIPSnoopingVlanStatsClear	1.3.6.1.4.1.4526.10.57.1.2.1.3	INTEGER	read-write	Clear FIP Snooping statistics on this Vlan. This is write-only value. It always returns '0' on request
agentFIPSnoopingIntfTable	1.3.6.1.4.1.4526.10.57.1.3		not-accessible	A table providing configuration for trusted FCF interface mode.
agentFIPSnoopingIntfEntry	1.3.6.1.4.1.4526.10.57.1.3.1		not-accessible	FCF trust mode configuration for an interface.
INT agentFIPSnoopingIntfPortModeFcf	1.3.6.1.4.1.4526.10.57.1.3.1.2	INTEGER	read-write	Enables/disables FCF port mode on an interface.
INT agentFIPSnoopingIntfStatsClear	1.3.6.1.4.1.4526.10.57.1.3.1.3	INTEGER	read-write	Clear FIP Snooping statistics on this interface. This is write-only value. It always returns '0' on request
INT agentFIPSnoopingStatsClear	1.3.6.1.4.1.4526.10.57.1.4	INTEGER	read-write	Clear all FIP Snooping statistics in the system. This is write-only value. It always returns '0' on request.
agentFIPSnoopingStatusGroup	1.3.6.1.4.1.4526.10.57.2
agentFIPSnoopingSessionTable	1.3.6.1.4.1.4526.10.57.2.1		not-accessible	A table for FIP Snooping Session entries.
agentFIPSnoopingSessionEntry	1.3.6.1.4.1.4526.10.57.2.1.1		not-accessible	Represents an entry in FIP Snooping session table.
U32 agentFIPSnoopingVlanIndex	1.3.6.1.4.1.4526.10.57.2.1.1.1	Unsigned32	read-only	FCoE Vlan in which the session is established.
MAC agentFIPSnoopingFCFMacAddr	1.3.6.1.4.1.4526.10.57.2.1.1.2	MacAddress	read-only	MAC address of the FCF to which the session is established.
MAC agentFIPSnoopingENodeMacAddr	1.3.6.1.4.1.4526.10.57.2.1.1.3	MacAddress	read-only	MAC address of the ENode from which the session originated.
INT agentFIPSnoopingSessionLoginType	1.3.6.1.4.1.4526.10.57.2.1.1.4	INTEGER	read-only	Type of login requested by ENode.
MAC agentFIPSnoopingFCoEMacAddr	1.3.6.1.4.1.4526.10.57.2.1.1.5	MacAddress	read-only	MAC address assigned to the VN_Port on the ENode.
U32 agentFIPSnoopingSessionTentativeIndex	1.3.6.1.4.1.4526.10.57.2.1.1.6	Unsigned32	read-only	Index to the tentavtive session.
OCT agentFIPSnoopingSessionFCID	1.3.6.1.4.1.4526.10.57.2.1.1.7	OCTET STRING	read-only	FCID created by FCF for this virtual session.
U32 agentFIPSnoopingSessionENodeIntf	1.3.6.1.4.1.4526.10.57.2.1.1.8	Unsigned32	read-only	Interface to which the ENode is connected.
U32 agentFIPSnoopingSessionFCFIntf	1.3.6.1.4.1.4526.10.57.2.1.1.9	Unsigned32	read-only	Interface on which the FCF is discovered.
DAT agentFIPSnoopingSessionTime	1.3.6.1.4.1.4526.10.57.2.1.1.10	DateAndTime	read-only	Time elapsed after this successful virtual session is established by ENode with FCF.
INT agentFIPSnoopingSessionExpiryTime	1.3.6.1.4.1.4526.10.57.2.1.1.11	INTEGER	read-only	This is virtual connection/session expiry interval. This is used to monitor the status of the session. Session entry is removed when the value reaches 0. This value is reset to 450 secs (5*90secs) every time an associated VN_Port FKA is received from the ENode. This is ignored (marked as NA) if the D-bit is set to one in the FCF Discovery Advertisements.
OCT agentFIPSnoopingSessionState	1.3.6.1.4.1.4526.10.57.2.1.1.12	OCTET STRING	read-only	This is the state of the virtual session. The state is displayed as TENTATIVE during the process of ENode login to FCF (using FLOGI or FDESC). It displays ACTIVE after ENode and FCF establish a successful virtual connection.
agentFIPSnoopingENodeTable	1.3.6.1.4.1.4526.10.57.2.2		not-accessible	A table for FIP Snooping discovered ENode entries.
agentFIPSnoopingENodeEntry	1.3.6.1.4.1.4526.10.57.2.2.1		not-accessible	Represents an entry in FIP Snooping ENodes table.
U32 agentFIPSnoopingENodeIntf	1.3.6.1.4.1.4526.10.57.2.2.1.3	Unsigned32	read-only	Interface to which the ENode is connected.
OCT agentFIPSnoopingENodeNameID	1.3.6.1.4.1.4526.10.57.2.2.1.4	OCTET STRING	read-only	Name ID of the ENode.
DAT agentFIPSnoopingENodeTimeSinceDiscovered	1.3.6.1.4.1.4526.10.57.2.2.1.5	DateAndTime	read-only	Time elapsed since the ENode is discovered.
U32 agentFIPSnoopingENodeMaxFCoESize	1.3.6.1.4.1.4526.10.57.2.2.1.6	Unsigned32	read-only	Maximum FCoE PDU size the ENode MAC intends to use for FCoE traffic. This is equivalent to the maximum Ethernet frame payload the ENode intends to send.
U32 agentFIPSnoopingENodeActiveSessions	1.3.6.1.4.1.4526.10.57.2.2.1.7	Unsigned32	read-only	Number of FCoE virtual connections successfully established by the ENode with FCFs.
U32 agentFIPSnoopingENodeWaitingSessions	1.3.6.1.4.1.4526.10.57.2.2.1.8	Unsigned32	read-only	Number of FCoE virtual connections initiated by ENode and waiting for FCF acceptance.
U32 agentFIPSnoopingENodeRejectedSessions	1.3.6.1.4.1.4526.10.57.2.2.1.9	Unsigned32	read-only	Number of virtual connections originted from ENode which are rejected by FCFs.
U32 agentFIPSnoopingENodeConnectedFCFsCount	1.3.6.1.4.1.4526.10.57.2.2.1.10	Unsigned32	read-only	Number of FCFs to which this ENode has FCoE virtual connections established.
agentFIPSnoopingFCFTable	1.3.6.1.4.1.4526.10.57.2.3		not-accessible	A table for FIP Snooping discovered FCF entries.
agentFIPSnoopingFCFEntry	1.3.6.1.4.1.4526.10.57.2.3.1		not-accessible	Represents an entry in FIP Snooping FCFs table.
U32 agentFIPSnoopingFCFIntf	1.3.6.1.4.1.4526.10.57.2.3.1.3	Unsigned32	read-only	Inteface on which FCF is discovered.
OCT agentFIPSnoopingFCFNameID	1.3.6.1.4.1.4526.10.57.2.3.1.4	OCTET STRING	read-only	Name Identifer of the FCF.
OCT agentFIPSnoopingFCFFabricName	1.3.6.1.4.1.4526.10.57.2.3.1.5	OCTET STRING	read-only	Fabric Name identifying the Fabric.
INT agentFIPSnoopingFCFAddressingMode	1.3.6.1.4.1.4526.10.57.2.3.1.6	INTEGER	read-only	Addressing mode(s) supported by the FCF.
INT agentFIPSnoopingFCFPriority	1.3.6.1.4.1.4526.10.57.2.3.1.7	INTEGER	read-only	This is the priority assigned to FCF. The highest priority value is 0 and the lowest priority value is 255.
INT agentFIPSnoopingFCFDbit	1.3.6.1.4.1.4526.10.57.2.3.1.8	INTEGER	read-only	This reflects the value of D bit value provided by the most recently received Discovery Advertisement from the FCF.
INT agentFIPSnoopingFCFIsAvialableForLogin	1.3.6.1.4.1.4526.10.57.2.3.1.9	INTEGER	read-only	This reflects the value of the A bit provided by the most recently received Discovery Advertisement from the FCF. This provides the information that the transmitting FCF is available for FIP FLOGI/FDISC from ENodes. This is informational and shall have no effect on existing logins.
INT agentFIPSnoopingFCFConfiguredFKA	1.3.6.1.4.1.4526.10.57.2.3.1.10	INTEGER	read-only	FIP keepalive interval (FKA_ADV_PERIOD) in seconds configured on the FCF multiplied by five. For example, if the FKA_ADV period configured on the FCF is 80 seconds, the value of this field is 400 seconds.
DAT agentFIPSnoopingFCFTimeSinceDiscovered	1.3.6.1.4.1.4526.10.57.2.3.1.11	DateAndTime	read-only	Time elapsed since the FCF is discovered.
U32 agentFIPSnoopingFCFConnectedENodesCount	1.3.6.1.4.1.4526.10.57.2.3.1.12	Unsigned32	read-only	Number of ENodes to which FCF has FCoE virtual connections established.
U32 agentFIPSnoopingFCFSessions	1.3.6.1.4.1.4526.10.57.2.3.1.13	Unsigned32	read-only	Total number of FCoE virtual connections successfully established by the ENodes with this FCF.
U32 agentFIPSnoopingFCFExpiryTime	1.3.6.1.4.1.4526.10.57.2.3.1.14	Unsigned32	read-only	This indicates the timer value in seconds to monitor the status of the FCF. FCF entry and all its associated virtual sessions will be removed when the value reaches 0. This value is reset to 'Configured FKA-ADV' every time a Discovery Advertisement is received from the FCF-MAC.
agentFIPSnoopingStatisticsGroup	1.3.6.1.4.1.4526.10.57.3
agentFIPSnoopingVlanStatisticsTable	1.3.6.1.4.1.4526.10.57.3.1		not-accessible	A table containing per-port, per-VLAN statistics for traffic received. Separate objects are provided for both the most-significant and least-significant bits of statistics counters for ports that are associated with this transparent bridge. The most-significant bit objects are only required on high capacity interfaces, as defined in the conformance clauses for these objects. This mechanism is provided as a way to read 64-bit counters for agents which support only SNMPv1. Note that the reporting of most-significant and least- significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.
agentFIPSnoopingVlanStatsEntry	1.3.6.1.4.1.4526.10.57.3.1.1		not-accessible	FIP Snooping control traffic statistics of a VLAN.
C32 agentFIPSnoopingVlanVlanRequestsEx	1.3.6.1.4.1.4526.10.57.3.1.1.1	Counter32	read-only	Number of VLAN Request messages received on the VLAN.
C32 agentFIPSnoopingVlanVlanNotifications	1.3.6.1.4.1.4526.10.57.3.1.1.2	Counter32	read-only	Number of VLAN Notification messages received on the VLAN.
C32 agentFIPSnoopingVlanMulticastDiscSolicits	1.3.6.1.4.1.4526.10.57.3.1.1.3	Counter32	read-only	Number of Multicast Discovery Solicitation messages snooped in the VLAN.
C32 agentFIPSnoopingVlanUnicastDiscSolicits	1.3.6.1.4.1.4526.10.57.3.1.1.4	Counter32	read-only	Number of Unicast Discovery Solicitation messages snooped in the VLAN.
C32 agentFIPSnoopingVlanFLogis	1.3.6.1.4.1.4526.10.57.3.1.1.5	Counter32	read-only	Number of Fabric Login messages snooped in the VLAN.
C32 agentFIPSnoopingVlanFDiscs	1.3.6.1.4.1.4526.10.57.3.1.1.6	Counter32	read-only	Number of Fabric Discovery Login messages snooped in the VLAN.
C32 agentFIPSnoopingVlanFLogouts	1.3.6.1.4.1.4526.10.57.3.1.1.7	Counter32	read-only	Number of Fabric Logout messages snooped in the VLAN.
C32 agentFIPSnoopingVlanVnPortKeepAlives	1.3.6.1.4.1.4526.10.57.3.1.1.8	Counter32	read-only	Number of VN_Port keep alive messages snooped in the VLAN.
C32 agentFIPSnoopingVlanMulticastDiscAdverts	1.3.6.1.4.1.4526.10.57.3.1.1.9	Counter32	read-only	Number of Multicast Discovery Advertisement messages snooped in the VLAN.
C32 agentFIPSnoopingVlanUnicastDiscAdverts	1.3.6.1.4.1.4526.10.57.3.1.1.10	Counter32	read-only	Number of Unicast Discovery Advertisement packets snooped in the VLAN.
C32 agentFIPSnoopingVlanFLogiAccepts	1.3.6.1.4.1.4526.10.57.3.1.1.11	Counter32	read-only	Number of Fabric Login accept packets snooped in the VLAN.
C32 agentFIPSnoopingVlanFLogiRejects	1.3.6.1.4.1.4526.10.57.3.1.1.12	Counter32	read-only	Number of Fabric Login reject packets snooped in the VLAN.
C32 agentFIPSnoopingVlanFDiscAccepts	1.3.6.1.4.1.4526.10.57.3.1.1.13	Counter32	read-only	Number of Fabric Discovery accept packets snooped in the VLAN.
C32 agentFIPSnoopingVlanFDiscRejects	1.3.6.1.4.1.4526.10.57.3.1.1.14	Counter32	read-only	Number of Fabric Discovery reject packets snooped in the VLAN.
C32 agentFIPSnoopingVlanFLogoutAccepts	1.3.6.1.4.1.4526.10.57.3.1.1.15	Counter32	read-only	Number of Fabric Logouts accept packets snooped in the VLAN.
C32 agentFIPSnoopingVlanFLogoutRejects	1.3.6.1.4.1.4526.10.57.3.1.1.16	Counter32	read-only	Number of Fabric Logouts reject packets snooped in the VLAN.
C32 agentFIPSnoopingVlanClearVirtLinks	1.3.6.1.4.1.4526.10.57.3.1.1.17	Counter32	read-only	Number of Clear Virtual Link request packets snooped in the VLAN.
C32 agentFIPSnoopingVlanVnPortSessionTimeouts	1.3.6.1.4.1.4526.10.57.3.1.1.18	Counter32	read-only	Number of virtual sessions removed due to session timer expiry in the VLAN.
C32 agentFIPSnoopingVlanFcfDiscAdvTimeouts	1.3.6.1.4.1.4526.10.57.3.1.1.19	Counter32	read-only	Number of ACTIVE sessions timed out due to Discovery Advertisements timer expiry from FCFs in the VLAN.
C32 agentFIPSnoopingVlanSessionFailuresDueToHwConfig	1.3.6.1.4.1.4526.10.57.3.1.1.20	Counter32	read-only	Number of sessions in the VLAN that failed while configuring the hardware.
C32 agentFIPSnoopingVlanSessionsDeniedFcfLimitReached	1.3.6.1.4.1.4526.10.57.3.1.1.21	Counter32	read-only	Number of sessions that are denied to be created for the new FCF as the number of FCFs reached the maximum allowed limit supported in the VLAN.
C32 agentFIPSnoopingVlanSessionsDeniedENodeLimitReached	1.3.6.1.4.1.4526.10.57.3.1.1.22	Counter32	read-only	Number of sessions that are denied to be created for the new ENode as the number of ENodes reached the maximum allowed limit supported by the system.
C32 agentFIPSnoopingVlanSessionsDeniedSystemLimitReached	1.3.6.1.4.1.4526.10.57.3.1.1.23	Counter32	read-only	Number of session create requests denied as the number of sessions reached the maximum allowed limit supported by the system.
agentFIPSnoopingIntfStatisticsTable	1.3.6.1.4.1.4526.10.57.3.2		not-accessible	A table containing per-port, per-VLAN statistics for traffic received. Separate objects are provided for both the most-significant and least-significant bits of statistics counters for ports that are associated with this transparent bridge. The most-significant bit objects are only required on high capacity interfaces, as defined in the conformance clauses for these objects. This mechanism is provided as a way to read 64-bit counters for agents which support only SNMPv1. Note that the reporting of most-significant and least- significant counter bits separately runs the risk of missing an overflow of the lower bits in the interval between sampling. The manager must be aware of this possibility, even within the same varbindlist, when interpreting the results of a request or asynchronous notification.
agentFIPSnoopingIntfStatsEntry	1.3.6.1.4.1.4526.10.57.3.2.1		not-accessible	FIP Snooping control traffic statistics on this interface.
C32 agentFIPSnoopingIntfVlanRequests	1.3.6.1.4.1.4526.10.57.3.2.1.1	Counter32	read-only	Number of VLAN Request messages received on the interface.
C32 agentFIPSnoopingIntfVlanNotifications	1.3.6.1.4.1.4526.10.57.3.2.1.2	Counter32	read-only	Number of VLAN Notification messages received on the interface.
C32 agentFIPSnoopingIntfMulticastDiscSolicits	1.3.6.1.4.1.4526.10.57.3.2.1.3	Counter32	read-only	Number of Multicast Discovery Solicitation messages received on the interface.
C32 agentFIPSnoopingIntfUnicastDiscSolicits	1.3.6.1.4.1.4526.10.57.3.2.1.4	Counter32	read-only	Number of Unicast Discovery Solicitation messages received on the interface.
C32 agentFIPSnoopingIntfFLogis	1.3.6.1.4.1.4526.10.57.3.2.1.5	Counter32	read-only	Number of Fabric Logins received on the interface.
C32 agentFIPSnoopingIntfFDiscs	1.3.6.1.4.1.4526.10.57.3.2.1.6	Counter32	read-only	Number of Fabric Discovery logins received on the interface.
C32 agentFIPSnoopingIntfFLogouts	1.3.6.1.4.1.4526.10.57.3.2.1.7	Counter32	read-only	Number of Fabric Logouts received on the interface.
C32 agentFIPSnoopingIntfVnPortKeepAlives	1.3.6.1.4.1.4526.10.57.3.2.1.8	Counter32	read-only	Number of VN_Port keepalive messages received on the interface.
C32 agentFIPSnoopingIntfMulticastDiscAdverts	1.3.6.1.4.1.4526.10.57.3.2.1.9	Counter32	read-only	Number of Multicast Discovery Advertisement messages received on the interface.
C32 agentFIPSnoopingIntfUnicastDiscAdverts	1.3.6.1.4.1.4526.10.57.3.2.1.10	Counter32	read-only	Number of Unicast Discovery Advertisement messages received on the interface.
C32 agentFIPSnoopingIntfFLogiAccepts	1.3.6.1.4.1.4526.10.57.3.2.1.11	Counter32	read-only	Number of Fabric Login accept messages received on the interface.
C32 agentFIPSnoopingIntfFLogiRejects	1.3.6.1.4.1.4526.10.57.3.2.1.12	Counter32	read-only	Number of Fabric Login reject messages received on the interface.
C32 agentFIPSnoopingIntfFDiscAccepts	1.3.6.1.4.1.4526.10.57.3.2.1.13	Counter32	read-only	Number of Fabric Discovery accept messages received on the interface.
C32 agentFIPSnoopingIntfFDiscRejects	1.3.6.1.4.1.4526.10.57.3.2.1.14	Counter32	read-only	Number of Fabric Discovery reject messages received on the interface.
C32 agentFIPSnoopingIntfFLogoutAccepts	1.3.6.1.4.1.4526.10.57.3.2.1.15	Counter32	read-only	Number of Fabric Logout accept messages received on the interface.
C32 agentFIPSnoopingIntfFLogoutRejects	1.3.6.1.4.1.4526.10.57.3.2.1.16	Counter32	read-only	Number of Fabric Logout reject messages received on the interface.
C32 agentFIPSnoopingIntfClearVirtLinks	1.3.6.1.4.1.4526.10.57.3.2.1.17	Counter32	read-only	Number of Clear Virtual Links messages received on the interface.
C32 agentFIPSnoopingIntfVnPortSessionTimeouts	1.3.6.1.4.1.4526.10.57.3.2.1.18	Counter32	read-only	Number of Virtual sessions removed due to session timer expiry.
C32 agentFIPSnoopingIntfFcfDiscAdvTimeouts	1.3.6.1.4.1.4526.10.57.3.2.1.19	Counter32	read-only	Number of ACTIVE sessions timed out due to Discovery Advertisements timer expiry from FCFs on this interface.
C32 agentFIPSnoopingIntfSessionFailuresDueToHwConfig	1.3.6.1.4.1.4526.10.57.3.2.1.20	Counter32	read-only	Number of sessions on this interface that failed while configuring the hardware.
C32 agentFIPSnoopingIntfSessionsDeniedFcfLimitReached	1.3.6.1.4.1.4526.10.57.3.2.1.21	Counter32	read-only	Number of sessions that are denied to be created on this interface form a new FCF as the number of FCFs count reached the maximum allowed limit in the system.
C32 agentFIPSnoopingIntfSessionsDeniedENodeLimitReached	1.3.6.1.4.1.4526.10.57.3.2.1.22	Counter32	read-only	Number of sessions that are denied to be created on this interface form a new ENode/host as the number of ENodes/hosts count reached the maximum allowed limit in the system.
C32 agentFIPSnoopingIntfSessionsDeniedSystemLimitReached	1.3.6.1.4.1.4526.10.57.3.2.1.23	Counter32	read-only	Number of sessions that are denied to be created as the number of sessions count reached the maximum allowed limit supported in the system. This is a global counter.
agentFIPSnoopingTraps	1.3.6.1.4.1.4526.10.57.4
NTF maxAllowedFcfsInVlanLimitReachedTrap	1.3.6.1.4.1.4526.10.57.4.1			This trap is sent when number of FCFs reached maximum allowed limit in VLAN.
NTF maxAllowedENodesLimitReachedTrap	1.3.6.1.4.1.4526.10.57.4.2			This trap is sent when number of ENodes reached maximum allowed limit in the system.
NTF maxAllowedSessionsLimitReachedTrap	1.3.6.1.4.1.4526.10.57.4.3			This trap is sent when number of sessions reached maximum allowed limit in the system.
NTF fcfDroppedTrap	1.3.6.1.4.1.4526.10.57.4.4			This trap is sent when a new FCF discovered (Discovery Advertisement is received from FCF) is dropped, as the maximum allowed FCFs limit in a VLAN is already reached.
NTF eNodeDroppedTrap	1.3.6.1.4.1.4526.10.57.4.5			This trap is sent when a new ENode discovered is dropped, as the maximum allowed ENodes limit in the system is already reached.
NTF sessionRequestDroppedTrap	1.3.6.1.4.1.4526.10.57.4.6			This trap is sent when a new session request received is dropped, as the maximum allowed session limit in system is already reached.

RFC description

Configures FIP Snooping for Ethernet bridges connected to ENodes, enabling FCF discovery and FCoE session monitoring on network switches.

Start monitoring Netgear FASTPATH-based data-center switch (FCoE FIP Snooping) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download NETGEAR-FIPSNOOPING-MIB