MY-SYSTEM-MIB

All MIBs › MY-SYSTEM-MIB

Organization: D-Link Crop.

Last Updated: 2002-03-20

Category: Switch Management

Description: Monitors D-Link switch system identity, uptime, CPU load, and hardware status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MY-SYSTEM-MIB?

MY-SYSTEM-MIB is a vendor-specific MIB from D-Link exposing core system identity and status objects for its managed switches. It belongs to the general system-management area of D-Link's switch product line, analogous to a vendor system MIB alongside the standard MIB-II system group. It exposes hardware/software/boot version identifiers, system control version, outbound (console) management settings, and overall switch layer/type information. Its most direct monitoring value is hardware and software status: it reports hardware power (mySystemHwPower) and fan (mySystemHwFan) status alongside software version fields (mySystemHwVersion, mySystemSwVersion, mySystemBootVersion), letting an administrator confirm the switch's power supply and fan health as well as which firmware/bootloader version is running, plus supports remote reset and parameter-save operations. It complements the standard MIB-II system group and depends on the base D-Link enterprise MIB framework, and is deployed on D-Link managed switches as a first point of contact for verifying hardware health and software version after deployment or upgrade. Engineers can download the MY-SYSTEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MY-SYSTEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

D-Link managed Ethernet switch

Monitoring Examples

An administrator would poll mySystemHwPower and mySystemHwFan to confirm the switch's power supply and cooling fan are in a normal operating state, flagging a fault if either reports an abnormal value. Checking mySystemSwVersion and mySystemBootVersion against the expected firmware release would confirm whether a software upgrade was applied correctly, while mySystemHwVersion and mySystemSysCtrlVersion identify the hardware revision. The mySystemReset object could trigger a remote reboot, and mySystemOutBandTimeout/mySystemTelnetTimeout govern management-session timeouts an admin would tune for security.

What Can Be Monitored

power supply status
fan status
hardware version
software/firmware version
boot version
system reset control
management session timeouts

Imported Objects

From MY-SMI

myMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
mySystemMIB	1.3.6.1.4.1.171.10.97.2.1			This module defines my system mibs.
mySystemMIBObjects	1.3.6.1.4.1.171.10.97.2.1.1
STR mySystemHwVersion	1.3.6.1.4.1.171.10.97.2.1.1.1	DisplayString	read-only	Return the string of the Revision number of hardware resides on the FastSwitch.
STR mySystemSwVersion	1.3.6.1.4.1.171.10.97.2.1.1.2	DisplayString	read-only	Return the string of the Revision number of software resides on the FastSwitch.
STR mySystemBootVersion	1.3.6.1.4.1.171.10.97.2.1.1.3	DisplayString	read-only	Return the string of the Revision number of BOOT software resides on the FastSwitch.
STR mySystemSysCtrlVersion	1.3.6.1.4.1.171.10.97.2.1.1.4	DisplayString	read-only	Return the string of the Revision number of CTRL software resides on the FastSwitch.
I32 mySystemParametersSave	1.3.6.1.4.1.171.10.97.2.1.1.5	Integer32	read-write	Save all parameters changed in configuration by setting this object to any value but 0, set its value to 0 will cause no action of agent, otherwise all changes of prarameters will be saved for retrive when system is reset, if parameter is changed but not saved all changes will come to their original value when system down and up again, when query always return value 0.
INT mySystemOutBandRate	1.3.6.1.4.1.171.10.97.2.1.1.6	INTEGER	read-write	Determine the console(OutBand) baud rate : 9600 - 1,19200 - 2, 38300 - 3, 57600 - 4, 115200 - 5, when the console baud rate is other value will return value 0.
INT mySystemReset	1.3.6.1.4.1.171.10.97.2.1.1.7	INTEGER	read-write	This Object allow perform soft reset of system by setting its value to none zero. if a soft resetis performed, after this having completed a warm start trap will send to declare the state and when queried will always return 0.
INT mySwitchLayer	1.3.6.1.4.1.171.10.97.2.1.1.8	INTEGER	read-only	Which layer's device the switch in system
INT mySystemHwPower	1.3.6.1.4.1.171.10.97.2.1.1.9	INTEGER	read-only	The state of power.
INT mySystemHwFan	1.3.6.1.4.1.171.10.97.2.1.1.10	INTEGER	read-only	The state of fan.
I32 mySystemOutBandTimeout	1.3.6.1.4.1.171.10.97.2.1.1.11	Integer32	read-write	The timeout of console.0 indicate that timeout function is disabled.
I32 mySystemTelnetTimeout	1.3.6.1.4.1.171.10.97.2.1.1.12	Integer32	read-write	The timeout of telnet.0 indicate that timeout function is disabled.
STR mySystemMainFile	1.3.6.1.4.1.171.10.97.2.1.1.13	DisplayString	read-only	Return the string of the name of main file on the FastSwitch.
I32 mySystemCurrentPower	1.3.6.1.4.1.171.10.97.2.1.1.14	Integer32	read-only	Return the current power of the FastSwitch.
I32 mySystemRemainPower	1.3.6.1.4.1.171.10.97.2.1.1.15	Integer32	read-only	Return the remain power of the FastSwitch.
I32 mySystemTemperature	1.3.6.1.4.1.171.10.97.2.1.1.16	Integer32	read-only	Return the temperature of the FastSwitch.
I32 mySystemElectricalSourceNum	1.3.6.1.4.1.171.10.97.2.1.1.17	Integer32	read-only	Return the electrical source number of the FastSwitch.
mySystemElectricalSourceIsNormalTable	1.3.6.1.4.1.171.10.97.2.1.1.18		not-accessible	A table of electrical source entries. Each object displays whether different electrical sources are normal or not.
mySystemElectricalSourceIsNormalEntry	1.3.6.1.4.1.171.10.97.2.1.1.18.1		not-accessible	An entry displays whether different electrical sources are normal or not.
I32 mySystemElectricalSourceIsNormalIndex	1.3.6.1.4.1.171.10.97.2.1.1.18.1.1	Integer32	read-only	An index that uniquely represents a electrical source.
INT mySystemElectricalSourceIsNormal	1.3.6.1.4.1.171.10.97.2.1.1.18.1.2	INTEGER	read-only	This object displays whether an electrical source is normal or not.
STR mySystemElectricalSourceName	1.3.6.1.4.1.171.10.97.2.1.1.18.1.3	DisplayString	read-only	The name of electrical source
I32 mySystemCurrentVoltage	1.3.6.1.4.1.171.10.97.2.1.1.19	Integer32	read-only	Return the current voltage of the FastSwitch.
I32 mySystemFanNUM	1.3.6.1.4.1.171.10.97.2.1.1.20	Integer32	read-only	Return the number of fan on the FastSwitch.
mySystemFanIsNormalTable	1.3.6.1.4.1.171.10.97.2.1.1.21		not-accessible	A table of fan entries. Each object displays whether different fans are normal or not.
mySystemFanIsNormalEntry	1.3.6.1.4.1.171.10.97.2.1.1.21.1		not-accessible	An entry displays whether different fans are normal or not.
I32 mySystemFanIsNormalIndex	1.3.6.1.4.1.171.10.97.2.1.1.21.1.1	Integer32	read-only	An index that uniquely represents a fan.
INT mySystemFanIsNormal	1.3.6.1.4.1.171.10.97.2.1.1.21.1.2	INTEGER	read-only	This object displays whether an fan is normal or not.
STR mySystemFanName	1.3.6.1.4.1.171.10.97.2.1.1.21.1.3	DisplayString	read-only	The name of fan
I32 mySystemReloadTimeRemain	1.3.6.1.4.1.171.10.97.2.1.1.22	Integer32	read-only	Return the remain time of reloading on the FastSwitch.
mySystemTemperatureTable	1.3.6.1.4.1.171.10.97.2.1.1.23		not-accessible	A table of temperature entries. Each object displays the temperature information.
mySystemTemperatureEntry	1.3.6.1.4.1.171.10.97.2.1.1.23.1		not-accessible	An entry displays the temperature information.
I32 mySystemTemperatureIndex	1.3.6.1.4.1.171.10.97.2.1.1.23.1.1	Integer32	read-only	An index that uniquely represents a device's temperature information.
STR mySystemTemperatureName	1.3.6.1.4.1.171.10.97.2.1.1.23.1.2	DisplayString	read-only	A textual name assigned to a temperature chip
I32 mySystemTemperatureCurrent	1.3.6.1.4.1.171.10.97.2.1.1.23.1.3	Integer32	read-only	Return the current temperature of the FastSwitch.The temperature display is not supported for the current temperature returns to 0.
I32 mySystemTemperatureWarningVaule	1.3.6.1.4.1.171.10.97.2.1.1.23.1.4	Integer32	read-write	The first warning of temperature of FastSwitch.
I32 mySystemTemperatureCritialVaule	1.3.6.1.4.1.171.10.97.2.1.1.23.1.5	Integer32	read-write	The second warning of temperature of FastSwitch.
STR mySystemSerialno	1.3.6.1.4.1.171.10.97.2.1.1.24	DisplayString	read-only	Return the string of the serial number resides on the FastSwitch.
mySystemVersionTable	1.3.6.1.4.1.171.10.97.2.1.1.25		not-accessible	A table of system version entries. Each object displays the system version information.
mySystemVersionEntry	1.3.6.1.4.1.171.10.97.2.1.1.25.1		not-accessible	An entry displays the system version information.
U32 mySystemVersionIndex	1.3.6.1.4.1.171.10.97.2.1.1.25.1.1	Unsigned32	read-only	An index that uniquely represents a device's system version information.
STR mySystemVersionName	1.3.6.1.4.1.171.10.97.2.1.1.25.1.2	DisplayString	read-only	A textual name assigned to a system version chip
STR mySystemVersionSwBoot	1.3.6.1.4.1.171.10.97.2.1.1.25.1.3	DisplayString	read-only	Return the software boot system version of the FastSwitch.
STR mySystemVersionSwCtrl	1.3.6.1.4.1.171.10.97.2.1.1.25.1.4	DisplayString	read-only	Return the software ctrl system version of the FastSwitch.
STR mySystemVersionSwMain	1.3.6.1.4.1.171.10.97.2.1.1.25.1.5	DisplayString	read-only	Return the software main system version of the FastSwitch.
STR mySystemVersionHw	1.3.6.1.4.1.171.10.97.2.1.1.25.1.6	DisplayString	read-only	Return the hardware system version of the FastSwitch.
STR mySystemVersionSerialno	1.3.6.1.4.1.171.10.97.2.1.1.25.1.7	DisplayString	read-only	Return the serial number of the FastSwitch.
mySystemMIBTraps	1.3.6.1.4.1.171.10.97.2.1.2
STR mySystemHardChangeDesc	1.3.6.1.4.1.171.10.97.2.1.2.1	DisplayString	accessible-for-notify	The description of hard change
NTF mySystemHardChangeDetected	1.3.6.1.4.1.171.10.97.2.1.2.2			System hardware has changed include number of devices or number of modules or the place or type of the module is change.
NTF mySystemPowerStateChange	1.3.6.1.4.1.171.10.97.2.1.2.3			while the state of power changed, then this trap will be sent.
NTF mySystemFanStateChange	1.3.6.1.4.1.171.10.97.2.1.2.4			while the state of fan changed, then this trap will be sent.
mySystemMIBConformance	1.3.6.1.4.1.171.10.97.2.1.3
mySystemMIBCompliances	1.3.6.1.4.1.171.10.97.2.1.3.1
mySystemMIBCompliance	1.3.6.1.4.1.171.10.97.2.1.3.1.1			The compliance statement for entities which implement the My System MIB
mySystemMIBGroups	1.3.6.1.4.1.171.10.97.2.1.3.2
mySystemMIBGroup	1.3.6.1.4.1.171.10.97.2.1.3.2.1			A collection of objects providing system information and opertion to a My agent.

RFC description

System information MIB for D-Link (MY Networks) FastSwitch devices; reports hardware/software versions.

Start monitoring D-Link managed Ethernet switch (system identity/hardware status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MY-SYSTEM-MIB

What Is MY-SYSTEM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description