All MIBs › MPLS-L3VPN-STD-MIB › mplsL3VpnVrfConfRteMxThrshTime
mplsL3VpnVrfConfRteMxThrshTime
Module: MPLS-L3VPN-STD-MIB
OID (symbolic): MPLS-L3VPN-STD-MIB::mplsL3VpnVrfConfRteMxThrshTime
OID (numeric): 1.3.6.1.2.1.10.166.11.1.1.6
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Denotes the interval in seconds, at which the route max threshold notification may be reissued after the maximum value has been exceeded (or has been reached if mplsL3VpnVrfConfMaxRoutes and mplsL3VpnVrfConfHighRteThresh are equal) and the initial notification has been issued. This value is intended to prevent continuous generation of notifications by an agent in the event that routes are continually added to a VRF after it has reached its maximum value. If this value is set to 0, the agent should only issue a single notification at the time that the maximum threshold has been reached, and should not issue any more notifications until the value of routes has fallen below the configured threshold value. This is the recommended default behavior.
What is mplsL3VpnVrfConfRteMxThrshTime?
How often, in seconds, the route-maximum-threshold notification may be reissued after a VRF's route count has exceeded its configured maximum; a value of 0 (the recommended default) means only a single notification fires until the count drops back below threshold, preventing a notification storm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.11.1.1.6 snmpwalk -v2c -c public <target> MPLS-L3VPN-STD-MIB::mplsL3VpnVrfConfRteMxThrshTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.11.1.1.6.1 snmpget -v2c -c public <target> MPLS-L3VPN-STD-MIB::mplsL3VpnVrfConfRteMxThrshTime.1
Start monitoring Vendor-neutral IETF standard (MPLS/BGP L3VPN provider-edge router) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MPLS-L3VPN-STD-MIB::mplsL3VpnVrfConfRteMxThrshTime OID value, configure state conditions and alerts, and monitor any Vendor-neutral IETF standard (MPLS/BGP L3VPN provider-edge router) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.2 | mgmt | AXON-MIB |
| 1.3.6.1.2.1 | mib_2 | AXON-MIB |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.166 | mplsStdMIB | MPLS-TC-STD-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.2.1.10.166.11 | mplsL3VpnMIB | MPLS-L3VPN-STD-MIB |
| 1.3.6.1.2.1.10.166.11.1 | mplsL3VpnObjects | MPLS-L3VPN-STD-MIB |
| 1.3.6.1.2.1.10.166.11.1.1 | mplsL3VpnScalars | MPLS-L3VPN-STD-MIB |
| 1.3.6.1.2.1.10.166.11.1.1.6 | mplsL3VpnVrfConfRteMxThrshTime | MPLS-L3VPN-STD-MIB |