All MIBs › MPLS-L3VPN-STD-MIB › mplsL3VpnVrfConfMaxPossRts
mplsL3VpnVrfConfMaxPossRts
Module: MPLS-L3VPN-STD-MIB
OID (symbolic): MPLS-L3VPN-STD-MIB::mplsL3VpnVrfConfMaxPossRts
OID (numeric): 1.3.6.1.2.1.10.166.11.1.1.5
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description:
Denotes maximum number of routes that the device will allow all VRFs jointly to hold. If this value is set to 0, this indicates that the device is unable to determine the absolute maximum. In this case, the configured maximum MAY not actually be allowed by the device.
What is mplsL3VpnVrfConfMaxPossRts?
This object reports the maximum number of routes that an MPLS/VPN device can hold across all VRFs (Virtual Routing and Forwarding tables) simultaneously. When set to 0, it indicates the device cannot determine the absolute maximum, though the configured limit may still be enforced. Network planners use this metric to understand device capacity and plan VPN scaling across the network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.2.1.10.166.11.1.1.5 snmpwalk -v2c -c public <target> MPLS-L3VPN-STD-MIB::mplsL3VpnVrfConfMaxPossRts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.2.1.10.166.11.1.1.5.1 snmpget -v2c -c public <target> MPLS-L3VPN-STD-MIB::mplsL3VpnVrfConfMaxPossRts.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.2 | mgmt | BKTEL-HFC862-BASE-MIB |
| 1.3.6.1.2.1 | mib_2 | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10 | transmission | CHECKPOINT-MIB-2 |
| 1.3.6.1.2.1.10.166 | mplsStdMIB | MPLS-TC-STD-MIB |
| 1.3.6.1.2.1.10.166.11 | mplsL3VpnMIB | MPLS-L3VPN-STD-MIB |
| 1.3.6.1.2.1.10.166.11.1 | mplsL3VpnObjects | MPLS-L3VPN-STD-MIB |
| 1.3.6.1.2.1.10.166.11.1.1 | mplsL3VpnScalars | MPLS-L3VPN-STD-MIB |
| 1.3.6.1.2.1.10.166.11.1.1.5 | mplsL3VpnVrfConfMaxPossRts | MPLS-L3VPN-STD-MIB |