MP-IPV6-MIB

All MIBs › MP-IPV6-MIB

Description: MP-IPV6-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MP-IPV6-MIB?

MP-IPV6-MIB is a private MIB (extending MMPF-MIB) implementing an SNMP-driven ping6 (ICMPv6 echo) diagnostic. Its ping table, keyed by ping ID, records target address and target site ID, a request-send trigger, data length, hop limit, send timeout, source interface, status, result, and an error-source-address field for a failed ping. As a diagnostic MIB it lets an administrator trigger an IPv6 reachability test to a remote target directly via SNMP and retrieve the result without CLI access. It is deployed on this vendor's IPv6-capable routers. Engineers can download the MP-IPV6-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MP-IPV6-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

IPv6-capable routers (SNMP-driven ping6 diagnostic)

Monitoring Examples

An administrator sets mpIpv6PingRequestSend to trigger an IPv6 reachability test to a remote site, then reads mpIpv6PingResult to confirm connectivity without needing CLI access to the device.

What Can Be Monitored

ICMPv6 ping test trigger and result

Imported Objects

From MMPF-MIB

mmpf-mib

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
NetworkAddress
TimeTicks
mgmt

From RFC1213-MIB

ifIndex

OIDs

OID symbolic	OID numeric	Type	Access	Description
mpIpv6	1.3.6.1.4.1.119.2.3.3.13.131
mpIpv6PingTable	1.3.6.1.4.1.119.2.3.3.13.131.1		not-accessible	The table of ping6 management information relevant to this entity's ICMPv6 echo identifier.
mpIpv6PingEntry	1.3.6.1.4.1.119.2.3.3.13.131.1.1		not-accessible	The ping6 management information for one of this entity's ICMPv6 echo identifier.
INT mpIpv6PingId	1.3.6.1.4.1.119.2.3.3.13.131.1.1.1	INTEGER	read-only	This is the index to identify the ping6 entry. The value of this index must be assigned uniquely, within the range of 1 - 65535. But generable ping entry is four simultaneously.
ADR mpIpv6PingTarget	1.3.6.1.4.1.119.2.3.3.13.131.1.1.2	Ipv6Address	read-write	The value of this object is the destination IPv6 address for this entry. This IPv6 address must always be a unicast IPv6 address.
INT mpIpv6PingTargetSiteId	1.3.6.1.4.1.119.2.3.3.13.131.1.1.3	INTEGER	read-write	The value of this object is the site id to which the destination belong, within the range of 1 - 8.(1 is default site.) it is necessary to set up this value, Only when a site local address is specified to be mpIpv6PingTarget. this value can be omitted and 1 is set up when it omits.
INT mpIpv6PingRequestSend	1.3.6.1.4.1.119.2.3.3.13.131.1.1.4	INTEGER	read-only	The value of this object is the ping6 request number of the times, within the range of 1 - 65535(default 1).
INT mpIpv6PingDataLength	1.3.6.1.4.1.119.2.3.3.13.131.1.1.5	INTEGER	read-write	The value of this object is the ping6 data length, within the range of 0 - 65507(default 64).
INT mpIpv6PingSendHopLimit	1.3.6.1.4.1.119.2.3.3.13.131.1.1.6	INTEGER	read-write	The value of this object is the HOP LIMIT value in ping6 packet, within the range of 1 - 255(default 64).
INT mpIpv6PingSendTimeOut	1.3.6.1.4.1.119.2.3.3.13.131.1.1.7	INTEGER	read-write	The value of this object is the ping6 time out value, within the range of 1 - 60 seconds(default 1).
INT mpIpv6PingSendInterface	1.3.6.1.4.1.119.2.3.3.13.131.1.1.8	INTEGER	read-write	The value of this object is ifIndex. IPv6 address assigned ifIndex is set as source IPv6 address in ping6 packets.
INT mpIpv6PingStatus	1.3.6.1.4.1.119.2.3.3.13.131.1.1.9	INTEGER	read-write	This object refers to the ping6 entry status. When this object is set to create(1), ping6 entry is created. Set to inProgress(2), ping6 is Started. When a reply or icmpv6 error receiveed and time out occured, the status become complete(3). This object can not set to complete(3). Set to destroy(4), entry is deleted.
INT mpIpv6PingResult	1.3.6.1.4.1.119.2.3.3.13.131.1.1.10	INTEGER	read-only	This object refers to the ping6 result status.
ADR mpIpv6PingErrorSourceAddress	1.3.6.1.4.1.119.2.3.3.13.131.1.1.11	Ipv6Address	read-only	This value of this object is the error source IPv6 address in icmpv6 error reply message.

RFC description

IPv6 private MIB for IX5000 platform ping management and ICMPv6 echo operations.

Start monitoring IPv6-capable router (SNMP-driven ping6 diagnostic) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MP-IPV6-MIB

What Is MP-IPV6-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description