TRANGO-APEX-SYS-MIB

All MIBs › TRANGO-APEX-SYS-MIB

Description: MIB for system-level information including firmware, FPGA, OS, and modem version strings on Trango APEX wireless backhaul units

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is TRANGO-APEX-SYS-MIB?

TRANGO-APEX-SYS-MIB is a Trango Systems MIB that reports system-level identification and version information for the Apex family of wireless backhaul radios. It exposes the unit type along with firmware, FPGA, OS, PIC, and modem software versions, plus a corresponding set of previous/backup version values for each. Its monitoring emphasis is squarely on software status: operators use it to confirm what firmware and sub-component versions are currently running, verify a recent upgrade actually took effect, and compare against the previous version to track rollback history. It is a companion MIB to TRANGO-APEX-MODEM-MIB, together covering both the link-quality and the software/version aspects of the same radio. It is deployed on Trango Apex wireless backhaul radios used by WISPs and cellular operators for point-to-point microwave links. Engineers can download the TRANGO-APEX-SYS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in TRANGO-APEX-SYS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Trango Systems Apex wireless backhaul radio

Monitoring Examples

sysUnitType identifies the hardware variant of the radio, while sysFWVer, sysFPGAVer, sysOSVer, sysPICVer, and sysModemVer report the currently active firmware, FPGA image, OS, PIC, and modem software versions. The paired sysFWPreVer, sysFPGAPreVer, sysOSPreVer, sysPICPreVer, and sysRFMPreVer objects retain the prior versions, letting an admin verify a firmware upgrade actually took effect across all sub-components or identify a partially failed upgrade where one component still reports its previous version.

What Can Be Monitored

unit type
firmware version
FPGA version
OS version
PIC version
modem software version and previous versions

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE

From SNMPv2-SMI

IpAddress

From SNMPv2-TC

DisplayString

From TRANGO-APEX-MIB

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32
apex	OBJECT-IDENTITY

How to Use in IPNetwork Monitor

Example using sysUnitType OID:

Select a Trango Systems Apex wireless backhaul radio (firmware/FPGA/OS version status) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type sysUnitType into the Find box to locate it in the OID tree, then select it and click OK. It reports the unit Type. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value changes unexpectedly, since which type is correct for this unit depends on your redundancy setup and an unplanned change often indicates a failover or misconfiguration. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
sys	1.3.6.1.4.1.5454.1.60.1
INT sysUnitTypeEx	1.3.6.1.4.1.5454.1.60.1.1	INTEGER	read-write	Unit Type
ver	1.3.6.1.4.1.5454.1.60.1.2
STR sysIFMVer	1.3.6.1.4.1.5454.1.60.1.2.1	DisplayString	read-only	SYS IFM Firmware version
STR sysFPGAVer	1.3.6.1.4.1.5454.1.60.1.2.2	DisplayString	read-only	FPGA Version
STR sysFWVer	1.3.6.1.4.1.5454.1.60.1.2.3	DisplayString	read-only	firmware version
STR sysOSVer	1.3.6.1.4.1.5454.1.60.1.2.4	DisplayString	read-only	OS version
STR sysPICVer	1.3.6.1.4.1.5454.1.60.1.2.5	DisplayString	read-only	PIC version
STR sysModemVer	1.3.6.1.4.1.5454.1.60.1.2.6	DisplayString	read-only	Modem version number
prever	1.3.6.1.4.1.5454.1.60.1.3
STR sysFPGAPreVer	1.3.6.1.4.1.5454.1.60.1.3.1	DisplayString	read-only	FPGA Previous version
STR sysFWPreVer	1.3.6.1.4.1.5454.1.60.1.3.2	DisplayString	read-only	FW Previous version
STR sysOSPreVer	1.3.6.1.4.1.5454.1.60.1.3.3	DisplayString	read-only	OS Previous version
STR sysPICPreVer	1.3.6.1.4.1.5454.1.60.1.3.4	DisplayString	read-only	PIC Previous version
STR sysRFMPreVer	1.3.6.1.4.1.5454.1.60.1.3.5	DisplayString	read-only	RFM Previous version
model	1.3.6.1.4.1.5454.1.60.1.4
STR sysModel	1.3.6.1.4.1.5454.1.60.1.4.1	DisplayString	read-only	System Model number
INT sysSerialID	1.3.6.1.4.1.5454.1.60.1.4.2	INTEGER	read-only	System Serial ID
mac	1.3.6.1.4.1.5454.1.60.1.5
STR sysMACeth0	1.3.6.1.4.1.5454.1.60.1.5.2	DisplayString	read-only	MAC address of Ethernet 0
STR sysMACeth1	1.3.6.1.4.1.5454.1.60.1.5.3	DisplayString	read-only	MAC address of Ethernet 1
INT sysBackupStatus	1.3.6.1.4.1.5454.1.60.1.6	INTEGER	read-only	The backup link is operational and ready or not
opmode	1.3.6.1.4.1.5454.1.60.1.7
INT sysDefaultOpmode	1.3.6.1.4.1.5454.1.60.1.7.1	INTEGER	read-write	Default operation mode
INT sysOpmode	1.3.6.1.4.1.5454.1.60.1.7.2	INTEGER	read-write	Display/Set current Opmode
community	1.3.6.1.4.1.5454.1.60.1.8
STR sysReadCommStr	1.3.6.1.4.1.5454.1.60.1.8.1	DisplayString	read-write	SNMP agent read community string. It is used For authentication purpse
STR sysWriteCommStr	1.3.6.1.4.1.5454.1.60.1.8.2	DisplayString	read-write	SNMP agent Write community string. It is used For authentication purpse
INT sysSave	1.3.6.1.4.1.5454.1.60.1.9	INTEGER	read-write	Save the configuration parameter
INT sysReboot	1.3.6.1.4.1.5454.1.60.1.10	INTEGER	read-write	Reboot the system
INT sysResetFactoryDefault	1.3.6.1.4.1.5454.1.60.1.11	INTEGER	read-write	Reset configuration parameter to factory defaults
ipconfig	1.3.6.1.4.1.5454.1.60.1.12
IP sysIpAddress	1.3.6.1.4.1.5454.1.60.1.12.1	IpAddress	read-write	IP Address
IP sysSubnetMask	1.3.6.1.4.1.5454.1.60.1.12.2	IpAddress	read-write	Subnet Mask
IP sysDefaultGateway	1.3.6.1.4.1.5454.1.60.1.12.3	IpAddress	read-write	Default Gateway
STR sysRemarks	1.3.6.1.4.1.5454.1.60.1.13	DisplayString	read-write	Remarks
daemon	1.3.6.1.4.1.5454.1.60.1.14
INT sysTFTPD	1.3.6.1.4.1.5454.1.60.1.14.1	INTEGER	read-write	Enable or disable to receive code or fileset download
INT sysHTTPD	1.3.6.1.4.1.5454.1.60.1.14.2	INTEGER	read-write	Enable or disable HTTPD
INT sysTelnetd	1.3.6.1.4.1.5454.1.60.1.14.3	INTEGER	read-write	Enable or disable Telnetd
INT sysAlignmentMode	1.3.6.1.4.1.5454.1.60.1.15	INTEGER	read-write	Alignment mode of the radio
INT sysFailover	1.3.6.1.4.1.5454.1.60.1.16	INTEGER	read-only	Enable/Disable failover feature
trapinfo	1.3.6.1.4.1.5454.1.60.1.17
INT sysTrapEnable	1.3.6.1.4.1.5454.1.60.1.17.1	INTEGER	read-write	Enable/Disable SNMP Trap
IP sysTrapIpAddress1	1.3.6.1.4.1.5454.1.60.1.17.2	IpAddress	read-write	Trap Destination IP Address
IP sysTrapIpAddress2	1.3.6.1.4.1.5454.1.60.1.17.3	IpAddress	read-write	Trap Destination IP Address 2
STR sysTrapCommStr	1.3.6.1.4.1.5454.1.60.1.17.4	DisplayString	read-write	Trap community string
image	1.3.6.1.4.1.5454.1.60.1.18
INT sysImageUpgrade	1.3.6.1.4.1.5454.1.60.1.18.1	INTEGER	read-write	Upgrade specified image
INT sysImageToggle	1.3.6.1.4.1.5454.1.60.1.18.2	INTEGER	read-write	Toggle to previous image
INT sysImageUpgradeStatus	1.3.6.1.4.1.5454.1.60.1.18.3	INTEGER	read-only	Get the current image upgrade progress status
INT sysRPSEnable	1.3.6.1.4.1.5454.1.60.1.19	INTEGER	read-write	Enable/Disable rapid port shutdown feature
INT sysSmartMode	1.3.6.1.4.1.5454.1.60.1.20	INTEGER	read-write	Enable/Disable Smart mode
INT sysResetDefaultIP	1.3.6.1.4.1.5454.1.60.1.21	INTEGER	read-write	Reset ipconfig to default IP
license	1.3.6.1.4.1.5454.1.60.1.22
STR sysLicense1Enable	1.3.6.1.4.1.5454.1.60.1.22.1	DisplayString	read-write	Display current license key 1 status
STR sysLicense2Enable	1.3.6.1.4.1.5454.1.60.1.22.2	DisplayString	read-write	Display current license key 2 status
INT sysConfigOption	1.3.6.1.4.1.5454.1.60.1.23	INTEGER	read-write	Perform config export, import or remove configuration file
diagnostic	1.3.6.1.4.1.5454.1.60.1.24
INT sysDiagnostic	1.3.6.1.4.1.5454.1.60.1.24.1	INTEGER	read-write	Run diagnostic and put the data in a file
INT sysDiagnosticStatus	1.3.6.1.4.1.5454.1.60.1.24.2	INTEGER	read-only	Display current status of diagnostic command
syslog	1.3.6.1.4.1.5454.1.60.1.25
INT sysSyslogExport	1.3.6.1.4.1.5454.1.60.1.25.1	INTEGER	read-write	export syslog into a file
INT sysSyslogLevel	1.3.6.1.4.1.5454.1.60.1.25.2	INTEGER	read-write	bitmap value for the loglevel
INT sysClearCounter	1.3.6.1.4.1.5454.1.60.1.26	INTEGER	read-write	Clear current counters
standby	1.3.6.1.4.1.5454.1.60.1.27
INT sysStandbyLink	1.3.6.1.4.1.5454.1.60.1.27.1	INTEGER	read-only	Standby unit link status
INT sysStandbyPll	1.3.6.1.4.1.5454.1.60.1.27.2	INTEGER	read-only	Standby link ODU-PLL status
INT sysStandbyRSSI	1.3.6.1.4.1.5454.1.60.1.27.3	INTEGER	read-only	Standby link RSSI value
INT sysEgressMargin	1.3.6.1.4.1.5454.1.60.1.28	INTEGER	read-write	Configure Egress Margin

RFC description

Monitors system information and firmware versions for Trango Apex wireless access point units.

Start monitoring Trango Systems Apex wireless backhaul radio (firmware/FPGA/OS version status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TRANGO-APEX-SYS-MIB