All MIBs › MMPF-MIB
Description: MMPF-MIB module
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is MMPF-MIB?
No module description or sample objects survived in the available source excerpt for MMPF-MIB, so its vendor, technology area, and exact purpose can't be confirmed from this data alone. Based only on the module name, it appears to be a specialized or vendor-proprietary module rather than a widely documented IETF standard, but this can't be verified here. Without any visible object definitions, the general categories of data it exposes and any hardware/software status parameters can't be honestly described. No dependency on other MIBs or standards can be confirmed from the available source. Its typical deployment context is likewise unknown given the lack of source detail. Engineers can download the MMPF-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in MMPF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- unknown - insufficient source data to identify vendor or device type
Monitoring Examples
No sample objects were provided for this MIB in the source excerpt, so no concrete object or table names can be cited, and a realistic monitoring scenario cannot be honestly constructed without further source data.
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| IpAddress | |
| NetworkAddress | |
| TimeTicks | |
| mgmt |
From RFC1253-MIB
| TruthValue |
From SNMPv2-SMI
| Gauge32 | |
| Integer32 |
From SNMPv2-TC
| PhysAddress | |
| TimeStamp |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| org | 1.3 | |||
| dod | 1.3.6 | |||
| internet | 1.3.6.1 | |||
| private | 1.3.6.1.4 | |||
| enterprises | 1.3.6.1.4.1 | |||
| nec | 1.3.6.1.4.1.119 | |||
| necProduct | 1.3.6.1.4.1.119.1 | |||
| datax | 1.3.6.1.4.1.119.1.3 | |||
| mmpf | 1.3.6.1.4.1.119.1.3.13 | |||
| mmn9110 | 1.3.6.1.4.1.119.1.3.13.1 | |||
| NTF fanUnitFault | 1.3.6.1.4.1.119.1.3.13.1.0.170001 | This trap is issued when a fan is failured. | ||
| NTF temperatureFault | 1.3.6.1.4.1.119.1.3.13.1.0.170002 | This trap is issured when a temperature become abnormal. | ||
| NTF voltageFault | 1.3.6.1.4.1.119.1.3.13.1.0.170003 | This trap is issued when a voltage is failured. | ||
| NTF exEquipmentFault | 1.3.6.1.4.1.119.1.3.13.1.0.170004 | This trap is issued when a equipment is failured. | ||
| NTF combusParityError | 1.3.6.1.4.1.119.1.3.13.1.0.170005 | This trap is issued when a COM-COM bus parity error is occurred. | ||
| NTF combusReadyAlmError | 1.3.6.1.4.1.119.1.3.13.1.0.170006 | This trap is issued when a COM-COM bus ready alarm error is occurred. | ||
| NTF combrgPciSerrFault | 1.3.6.1.4.1.119.1.3.13.1.0.170007 | This trap is issued when a Stby COM-Bridge pci serr is occurred. | ||
| NTF versionWriteNg | 1.3.6.1.4.1.119.1.3.13.1.0.170008 | This trap is issued when failured to write version at file. | ||
| NTF fanUnitFaultRecover | 1.3.6.1.4.1.119.1.3.13.1.0.171001 | This trap is issured when a fan is recovered. | ||
| NTF temperatureFaultRecover | 1.3.6.1.4.1.119.1.3.13.1.0.171002 | This trap is issured when a temperature is recovered. | ||
| NTF voltageFaultRecover | 1.3.6.1.4.1.119.1.3.13.1.0.171003 | This trap is issued when a voltage is recovered. | ||
| NTF exEquipmentFaultRecover | 1.3.6.1.4.1.119.1.3.13.1.0.171004 | This trap is issued when a equipment is recovered. | ||
| NTF combusParityErrorRecover | 1.3.6.1.4.1.119.1.3.13.1.0.171005 | This trap is issued when a COM-COM bus parity error is recovered. | ||
| NTF combusReadyAlmErrorRecover | 1.3.6.1.4.1.119.1.3.13.1.0.171006 | This trap is issued when a COM-COM bus ready alarm error is recovered. | ||
| NTF combrgPciSerrFaultRecover | 1.3.6.1.4.1.119.1.3.13.1.0.171007 | This trap is issued when a Stby COM-Bridge pci serr is recoverd. | ||
| NTF versionWriteNgRecover | 1.3.6.1.4.1.119.1.3.13.1.0.171008 | This trap is issued when recover from failure status to write version at file. | ||
| NTF returnedToOldFiles | 1.3.6.1.4.1.119.1.3.13.1.0.200001 | Returned to the previous system files. | ||
| NTF supervisorLogin | 1.3.6.1.4.1.119.1.3.13.1.0.1280001 | Supervisor logs in the system. | ||
| NTF supervisorLoginFailure | 1.3.6.1.4.1.119.1.3.13.1.0.1280002 | Supervisor login failure from the system. | ||
| NTF supervisorExit | 1.3.6.1.4.1.119.1.3.13.1.0.1281001 | Supervisor exits from the system. | ||
| mmn9120 | 1.3.6.1.4.1.119.1.3.13.2 | |||
| ix5005 | 1.3.6.1.4.1.119.1.3.13.3 | |||
| ix5003 | 1.3.6.1.4.1.119.1.3.13.4 | |||
| nec_mib | 1.3.6.1.4.1.119.2 | |||
| necProductDepend | 1.3.6.1.4.1.119.2.3 | |||
| datax_mib | 1.3.6.1.4.1.119.2.3.3 | |||
| mmpf_mib | 1.3.6.1.4.1.119.2.3.3.13 | |||
| mpSystem | 1.3.6.1.4.1.119.2.3.3.13.1 | |||
| STR mpSysSoftwareVersion | 1.3.6.1.4.1.119.2.3.3.13.1.1 | DisplayString | read-only | Indicates the software version number of this equipment |
| DAT mpSysTime | 1.3.6.1.4.1.119.2.3.3.13.1.2 | DateAndTime | read-write | It is used to set the date and time to the realtime clock of this equipment |
| mpSysFanTable | 1.3.6.1.4.1.119.2.3.3.13.1.3 | not-accessible | Indicates the table of the FAN information of this equipment. | |
| mpSysFanEntry | 1.3.6.1.4.1.119.2.3.3.13.1.3.1 | not-accessible | Indicates the entry of the FAN information of this equipment. | |
| INT mpSysFanIndex | 1.3.6.1.4.1.119.2.3.3.13.1.3.1.1 | INTEGER | read-only | Indicates the index value to identify the FAN in the equipment uniquely. If machine is 9110, the range is '1' to '6'. If machine is 9120, the range is '1' to '10'. |
| STR mpSysFanType | 1.3.6.1.4.1.119.2.3.3.13.1.3.1.2 | DisplayString | read-only | Indicates the character string which describes the FAN type. |
| INT mpSysFanStatus | 1.3.6.1.4.1.119.2.3.3.13.1.3.1.3 | INTEGER | read-only | Indicates the status of the FAN operation. If it is set to '1', the FAN operation is normal. If it is set to '2', the FAN operation is abnormal. |
| mpSysVoltageTable | 1.3.6.1.4.1.119.2.3.3.13.1.4 | not-accessible | Indicates the information of the voltages of the equipment. | |
| mpSysVoltageEntry | 1.3.6.1.4.1.119.2.3.3.13.1.4.1 | not-accessible | Indicates the entry of the information of the voltages of the equipment. | |
| INT mpSysVoltagePackageIndex | 1.3.6.1.4.1.119.2.3.3.13.1.4.1.1 | INTEGER | read-only | Indicates the Index value to identify the COM Package in the equipment uniquely. |
| INT mpSysVoltageIndex | 1.3.6.1.4.1.119.2.3.3.13.1.4.1.2 | INTEGER | read-only | Indicates the index value to identify uniquely the voltage provided by the power unit of the equipment. |
| STR mpSysVoltageType | 1.3.6.1.4.1.119.2.3.3.13.1.4.1.3 | DisplayString | read-only | Indicates the character string which describes the power unit type and com type. |
| INT mpSysVoltageReading | 1.3.6.1.4.1.119.2.3.3.13.1.4.1.4 | INTEGER | read-only | Indicates the observed voltage, in milli-volt (mV). |
| INT mpSysVoltageStatus | 1.3.6.1.4.1.119.2.3.3.13.1.4.1.5 | INTEGER | read-only | Indicates the statsus of the voltage. If it is set to '1', the voltage is within the normal range. If it is set to '2', the voltage is in the abnormal range. |
| mpSysTempTable | 1.3.6.1.4.1.119.2.3.3.13.1.5 | not-accessible | Indicates the table of the Temperature information of this equipment. | |
| mpSysTempEntry | 1.3.6.1.4.1.119.2.3.3.13.1.5.1 | not-accessible | Indicates the entry of the information of the temperature of the equipment. | |
| INT mpSysTempPackageIndex | 1.3.6.1.4.1.119.2.3.3.13.1.5.1.1 | INTEGER | read-only | Indicates the Index value to identify the COM Package in the equipment uniquely. |
| STR mpSysTempType | 1.3.6.1.4.1.119.2.3.3.13.1.5.1.2 | DisplayString | read-only | Indicates the character string which describes the com unit type. |
| INT mpSysTempStatus | 1.3.6.1.4.1.119.2.3.3.13.1.5.1.3 | INTEGER | read-only | Indicates the status of the temperature of this equipment inside. If it is set to '1', the temperature is within the normal temperature range. If it is set to '2', the temperrature is in the abnomal range. |
| INT mpSysTempReading | 1.3.6.1.4.1.119.2.3.3.13.1.5.1.4 | INTEGER | read-only | Indicates the temperature of the equipment inside, in degree (Celusius). |
| INT mpSysTempMinThresh | 1.3.6.1.4.1.119.2.3.3.13.1.5.1.5 | INTEGER | read-only | Indicates the temperature of the equipment inside, in degree (Celusius). |
| INT mpSysTempMaxThresh | 1.3.6.1.4.1.119.2.3.3.13.1.5.1.6 | INTEGER | read-only | Indicates the higher threshold of the normal temparature range for the equipment, in degree (Celsius). |
| mpSysEqpTable | 1.3.6.1.4.1.119.2.3.3.13.1.6 | not-accessible | Indicates the table of the outside equipment information. | |
| mpSysEqpEntry | 1.3.6.1.4.1.119.2.3.3.13.1.6.1 | not-accessible | Indicates the entry of the outside equipment information. | |
| INT mpSysEqpIndex | 1.3.6.1.4.1.119.2.3.3.13.1.6.1.1 | INTEGER | read-only | Indicates the index value to identify the outside equipment uniquely. |
| STR mpSysEqpType | 1.3.6.1.4.1.119.2.3.3.13.1.6.1.2 | DisplayString | read-only | Indicates the character string which describes the external equipment type. |
| INT mpSysEqpStatus | 1.3.6.1.4.1.119.2.3.3.13.1.6.1.3 | INTEGER | read-only | Indicates the status of the outside equipment operation. If it is set to '1', the outside equipment operation is normal. If it is set to '2', the outside equipment operation is abnormal. |
| mpSysCpuUseTable | 1.3.6.1.4.1.119.2.3.3.13.1.7 | not-accessible | Indicates the table of the percentage of cpu using information. | |
| mpSysCpuUseEntry | 1.3.6.1.4.1.119.2.3.3.13.1.7.1 | not-accessible | Indicates the entry of the percentage of cpu using information. | |
| INT mpSysCpuUseIndex | 1.3.6.1.4.1.119.2.3.3.13.1.7.1.1 | INTEGER | read-only | Indicates the index value to identify the package in the equipment uniquely. |
| INT mpSysCpuTimeIndex | 1.3.6.1.4.1.119.2.3.3.13.1.7.1.2 | INTEGER | read-only | Indicates the index value to identify the time collecting percentage of cpu using uniquely. |
| STR mpSysCpuUseType | 1.3.6.1.4.1.119.2.3.3.13.1.7.1.3 | DisplayString | read-only | Indicates the character string which describes the slot type. |
| STR mpSysCpuTimeType | 1.3.6.1.4.1.119.2.3.3.13.1.7.1.4 | DisplayString | read-only | Indicates the character string which describes the time type of collecting percentage of cpu using. |
| INT mpSysCpuUse | 1.3.6.1.4.1.119.2.3.3.13.1.7.1.5 | INTEGER | read-only | Indicates the percentage of cpu using. |
| mpIfCard | 1.3.6.1.4.1.119.2.3.3.13.2 | |||
| mpIfCardTable | 1.3.6.1.4.1.119.2.3.3.13.2.1 | not-accessible | A table that contains information about interface card. | |
| mpIfCardEntry | 1.3.6.1.4.1.119.2.3.3.13.2.1.1 | not-accessible | A entry Indicates that contains information about interface card. | |
| INT mpIfCardSlotNumber | 1.3.6.1.4.1.119.2.3.3.13.2.1.1.1 | INTEGER | read-only | Indicates slot number of the interface card. |
| INT mpIfCardType | 1.3.6.1.4.1.119.2.3.3.13.2.1.1.2 | INTEGER | read-only | Indicates kind of the interface card. |
| STR mpIfCardOperSide | 1.3.6.1.4.1.119.2.3.3.13.2.1.1.3 | DisplayString | read-only | Indicates the side which was used for setting up |
| STR mpIfCardOperVersion | 1.3.6.1.4.1.119.2.3.3.13.2.1.1.4 | DisplayString | read-only | Indicates the firmware version in operation. |
| STR mpIfCardSideAVersion | 1.3.6.1.4.1.119.2.3.3.13.2.1.1.5 | DisplayString | read-only | Indicates the firmware version of side A. |
| STR mpIfCardSideBVersion | 1.3.6.1.4.1.119.2.3.3.13.2.1.1.6 | DisplayString | read-only | Indicates the firmware version of side B. |
| STR mpIfCardBootDpVersion | 1.3.6.1.4.1.119.2.3.3.13.2.1.1.7 | DisplayString | read-only | Indicates the firmware version of BOOT/DP. |
| mpEtherPort | 1.3.6.1.4.1.119.2.3.3.13.3 | |||
| mpEtherPortTable | 1.3.6.1.4.1.119.2.3.3.13.3.1 | not-accessible | Indicates the table of Ether port information. | |
| mpEtherPortEntry | 1.3.6.1.4.1.119.2.3.3.13.3.1.1 | not-accessible | Indicates the entry of each Ether port's information. | |
| INT mpEtherPortIfIndex | 1.3.6.1.4.1.119.2.3.3.13.3.1.1.1 | INTEGER | read-only | Indicates the interface number assigned to the Ether port uniquely in the equipment. Each Ethernet port identified by this object is the same Ethernet port identified by the same number of the ifIndex. |
| INT mpEtherPortLoopBackType | 1.3.6.1.4.1.119.2.3.3.13.3.1.1.2 | INTEGER | read-write | Indicates the type of the Loop-back test. If it is set to '2', the internal Loop-back test is executed. The Loop-back test is finished when one test packet has been sent. If it is set to '1', the Loop-back testing is not being executed, which means it is in the normal mode. |
| INT mpEtherPortMode | 1.3.6.1.4.1.119.2.3.3.13.3.1.1.3 | INTEGER | read-write | Indicates the operation mode of the port. In case of Antomatical mode, the value '1' is set. In case of HDX10M, the value '2' is set. In case of FDX10M, the value '3' is set. In case of HDX100M, the value '4' is set. In case of FDX100M, the value '5' is set. In case of HDX1000M, the value '6' is set. -- @013 In case of FDX1000M, the value '7' is set. -- @013 The default value is '1'. |
| mpEtherPortStatusTable | 1.3.6.1.4.1.119.2.3.3.13.3.2 | not-accessible | Indicates the table of Ether port status information. | |
| mpEtherPortStatusEntry | 1.3.6.1.4.1.119.2.3.3.13.3.2.1 | not-accessible | Indicates the entry of each Ether port's status information. | |
| INT mpEtherPortStsIfIndex | 1.3.6.1.4.1.119.2.3.3.13.3.2.1.1 | INTEGER | read-only | Indicates the interface number assigned to the Ether port uniquely in the equipment. Each Ethernet port identified by this object is the same Ethernet port identified by the same number of the ifIndex. |
| INT mpEtherPortStsLoopBackResult | 1.3.6.1.4.1.119.2.3.3.13.3.2.1.2 | INTEGER | read-only | Indicates the result of the Loop-back test. |
| INT mpEtherPortStsMode | 1.3.6.1.4.1.119.2.3.3.13.3.2.1.3 | INTEGER | read-only | Indicates operation mode of the port. If it set to '1', operation mode is automatic. If it set to '2', operation mode is manual. |
| GAU mpEtherPortStsSpeed | 1.3.6.1.4.1.119.2.3.3.13.3.2.1.4 | Gauge | read-only | Indicastes current speed of the port in bps. |
| INT mpEtherPortStsFullDuplex | 1.3.6.1.4.1.119.2.3.3.13.3.2.1.5 | INTEGER | read-only | Indicates which current port status is full-duplex or half-duplex. If it is set to '1', it is half-duplex. If it is set to '2', it is full-duplex. |
| mpVlan | 1.3.6.1.4.1.119.2.3.3.13.4 | |||
| INT mpVlanModeStatus | 1.3.6.1.4.1.119.2.3.3.13.4.1 | INTEGER | read-write | Indicates to validate the configuration of VLAN group. It is set to '1' when the configuration will be valid, after the value of objects had been modified. |
| mpVlanTable | 1.3.6.1.4.1.119.2.3.3.13.4.2 | not-accessible | It is used for VLAN configuration. | |
| mpVlanEntry | 1.3.6.1.4.1.119.2.3.3.13.4.2.1 | not-accessible | Indicates the table entry of the VLAN configuration. | |
| INT mpVlanIndex | 1.3.6.1.4.1.119.2.3.3.13.4.2.1.1 | INTEGER | read-only | Indicates the specified number to identify the VLAN. The lowest number must be assigned to the default VLAN. |
| INT mpVlanRtrIndex | 1.3.6.1.4.1.119.2.3.3.13.4.2.1.2 | INTEGER | read-only | Indicates the interface number assigned to the VLAN uniquely, within the equipment. The VLAN identified by this object is the same VLAN identified by the same number of ifIndex. The lowest number must be assigned to the default VLAN. |
| STR mpVlanName | 1.3.6.1.4.1.119.2.3.3.13.4.2.1.3 | DisplayString | read-write | Indicates the name which is assigned to the VLAN for administrative purpose. I is used to assign or change the name of VLAN. In the initial state, only 'default' is registered as the default VLAN. The default VLAN name cannot be changed. |
| INT mpVlanNameStatus | 1.3.6.1.4.1.119.2.3.3.13.4.2.1.4 | INTEGER | read-write | No description. |
| mpVlanGroupTable | 1.3.6.1.4.1.119.2.3.3.13.4.3 | not-accessible | This is the table entry of the VLAN group name registration. | |
| mpVlanGroupEntry | 1.3.6.1.4.1.119.2.3.3.13.4.3.1 | not-accessible | This is the table entry of the VLAN group name registration. | |
| INT mpVlanGrpIndex | 1.3.6.1.4.1.119.2.3.3.13.4.3.1.1 | INTEGER | read-only | This is the index to identify VLAN group. The value of this index and the index mpVlanIndex must be assigned uniquely,witrhin the range of 2 - 4095. |
| STR mpVlanGrpName | 1.3.6.1.4.1.119.2.3.3.13.4.3.1.2 | DisplayString | read-write | This object is the name defined to this VLAN Group, for management purpose. |
| INT mpVlanGrpNameStatus | 1.3.6.1.4.1.119.2.3.3.13.4.3.1.3 | INTEGER | read-write | This object is used to create or delete the entry of mpVlanGroupTable. The value '1' is set to create the entry, and the value '2' is set to delete the entry. |
| mpVlanBigpipeTable | 1.3.6.1.4.1.119.2.3.3.13.4.4 | not-accessible | This is the table type object of BigPipe name registration. | |
| mpVlanBigpipeEntry | 1.3.6.1.4.1.119.2.3.3.13.4.4.1 | not-accessible | This is the entry of the mpVlanBigPipeTable. | |
| INT mpVlanBigpipeIndex | 1.3.6.1.4.1.119.2.3.3.13.4.4.1.1 | INTEGER | read-only | No description. |
| STR mpVlanBigpipeName | 1.3.6.1.4.1.119.2.3.3.13.4.4.1.2 | DisplayString | read-write | This is the index to identify the BigPipe. The value of this index should be within 1 - 6. |
| INT mpVlanBigpipeNameStatus | 1.3.6.1.4.1.119.2.3.3.13.4.4.1.3 | INTEGER | read-write | This object is used to create or delete the entry of mpVlanBigPipeTable. The value '1' is set to create the entry, and the value '2' is set to delete the entry. |
| INT mpVlanBigpipeMode | 1.3.6.1.4.1.119.2.3.3.13.4.4.1.4 | INTEGER | read-write | This object is used to specify the communication status of BigPipe to VLAN. If the value is set to '1', frames to/from all VLANs (except VLANs registered in mpVlanBigpipeVidControlTable) are passed. If the value is set to '2', frames to/from all VLANs (except VLANs registered in mpVlanBigpipeVidControlTable) are filtered. The default value is '1'. |
| mpVlanIntfTable | 1.3.6.1.4.1.119.2.3.3.13.4.5 | not-accessible | This is the table type object of the interface (Ethernet port and logical ELAN port) subsucription to VLAN. | |
| mpVlanIntfEntry | 1.3.6.1.4.1.119.2.3.3.13.4.5.1 | not-accessible | This is the table entry of mpVlanIntfTable. | |
| INT mpVlanIntfVlanIndex | 1.3.6.1.4.1.119.2.3.3.13.4.5.1.1 | INTEGER | read-only | This is the index to identify the existing VLAN to which the interfaces are subscribed. When the equipment is just shipped from factory, all the Ethernet ports are subscribed to the default VLAN. |
| INT mpVlanIntfNumber | 1.3.6.1.4.1.119.2.3.3.13.4.5.1.2 | INTEGER | read-only | This is the index to identify the Ethernet port number or logical ELAN port number subscribed to this VLAN. The value of this index is the same as ifIndex. |
| INT mpVlanIntfStatus | 1.3.6.1.4.1.119.2.3.3.13.4.5.1.3 | INTEGER | read-write | This object is used to register or delete the interface to this VLAN. The value '1' is set to register the interface to this VLAN, and the value '2' is set to delete the interface from this VLAN. When all the interfaces are deleted from this VLAN, the table entry of this VLAN is also deleted. |
| mpVlanGroupIntfTable | 1.3.6.1.4.1.119.2.3.3.13.4.6 | not-accessible | This is the table type object of the VLAN subscription to VLAN Group. | |
| mpVlanGroupIntfEntry | 1.3.6.1.4.1.119.2.3.3.13.4.6.1 | not-accessible | This is the table entry of mpVlanGroupIntfTable. | |
| INT mpVlanGrpIntfIndex | 1.3.6.1.4.1.119.2.3.3.13.4.6.1.1 | INTEGER | read-only | This is the index to identify the existing VLAN Group to which the VLANs are subscribed. |
| INT mpVlanGrpIntfVlanIndex | 1.3.6.1.4.1.119.2.3.3.13.4.6.1.2 | INTEGER | read-only | This is the index to identify the VLAN which is subscribed to this VLAN Group. |
| INT mpVlanGrpIntfStatus | 1.3.6.1.4.1.119.2.3.3.13.4.6.1.3 | INTEGER | read-write | This object is used to register/delete the VLAN to/from this VLAN Group. The value '1' is set to register this VLAN to this VLAN Group, and the value '2' is set to delete this VLAN from this VLAN Group. |
| mpVlanBigpipeIntfTable | 1.3.6.1.4.1.119.2.3.3.13.4.7 | not-accessible | This is the table type object of the interface (Ethernet port) subscription to BigPipe. | |
| mpVlanBigpipeIntfEntry | 1.3.6.1.4.1.119.2.3.3.13.4.7.1 | not-accessible | This is the table entry of mpVlanBigPipeIntfTable. | |
| INT mpVlanBigpipeIntfIndex | 1.3.6.1.4.1.119.2.3.3.13.4.7.1.1 | INTEGER | read-only | This is the index to identify the existing BigPipe. |
| INT mpVlanBigpipeIntfNumber | 1.3.6.1.4.1.119.2.3.3.13.4.7.1.2 | INTEGER | read-only | This is the index to identify the physical interface (Ethernet port) number subscribed to this BigPipe. The value of this index is the same as the value of ifIndex. The interface which is to be subscribed to BigPipe must not be subscribedany VLAN. |
| INT mpVlanBigpipeIntfNumberStatus | 1.3.6.1.4.1.119.2.3.3.13.4.7.1.3 | INTEGER | read-write | This object is used to register/delete the interface (Ethernet port) to/from this BigPipe. The value '1' is set to register this interface to this BigPipe, and the value '2' is set to delete this interface from this BigPipe. |
| mpVlanMacTable | 1.3.6.1.4.1.119.2.3.3.13.4.8 | not-accessible | This is the table type object of MAC address data of the VLAN. | |
| mpVlanMacEntry | 1.3.6.1.4.1.119.2.3.3.13.4.8.1 | not-accessible | This is the table entry of mpVlanMacTable. | |
| INT mpVlanMacVlanIndex | 1.3.6.1.4.1.119.2.3.3.13.4.8.1.1 | INTEGER | read-only | This is the index to identify the existing VLAN. The value of this object is the VLAN number. |
| MAC mpVlanMacAddress | 1.3.6.1.4.1.119.2.3.3.13.4.8.1.2 | MacAddress | read-only | This object is the MAC address which is included in this VLAN. |
| INT mpVlanMacIntfNumber | 1.3.6.1.4.1.119.2.3.3.13.4.8.1.3 | INTEGER | read-write | This object is the Ethernet port number or logical ELAN number, from which the frame with source MAC address included in this VLAN can be received.This interface must belong to this VLAN. This object is set to '0' when no port is specified. |
| INT mpVlanMacStatus | 1.3.6.1.4.1.119.2.3.3.13.4.8.1.4 | INTEGER | read-write | This object is used to create or delete the entry of this table. The value '1' is set to create the entry, and the value '2' is set to deletethe entry. |
| mpVlanBigpipeVidControlTable | 1.3.6.1.4.1.119.2.3.3.13.4.9 | not-accessible | This is the table type object of the filter condition concerning to VID for BigPipe. | |
| mpVlanBigpipeVidControlEntry | 1.3.6.1.4.1.119.2.3.3.13.4.9.1 | not-accessible | This is the table entry of mpVlanBigpipeVidControlTable. | |
| INT mpVlanBigpipeVidControlIndex | 1.3.6.1.4.1.119.2.3.3.13.4.9.1.1 | INTEGER | read-only | This is the index to identify the BigPipe to which this filter condition is applied. |
| INT mpVlanBigpipeVidControlVid | 1.3.6.1.4.1.119.2.3.3.13.4.9.1.2 | INTEGER | read-only | This object is the VID of VLAN or VLAN Group, to which this filter condition is applied. |
| INT mpVlanBigpipeVidControlStatus | 1.3.6.1.4.1.119.2.3.3.13.4.9.1.3 | INTEGER | read-write | This object is used to register/delete the VID filter condition for BigPipe. The value '1' is set to register the filter condition, and the value '2' is set to delete the filter condition. |
| mpVlanTpFdbTable | 1.3.6.1.4.1.119.2.3.3.13.4.10 | not-accessible | A table that contains information about forwarding database per VLAN. | |
| mpVlanTpFdbEntry | 1.3.6.1.4.1.119.2.3.3.13.4.10.1 | not-accessible | Each entry contains information about forwarding database per VLAN. | |
| INT mpVlanTpFdbVlanIndex | 1.3.6.1.4.1.119.2.3.3.13.4.10.1.1 | INTEGER | read-only | Indicates the VLAN number to specify the forwarding database per VLAN. |
| MAC mpVlanTpFdbMacAddress | 1.3.6.1.4.1.119.2.3.3.13.4.10.1.2 | MacAddress | read-only | Indicates the destination MAC Address which belongs to the forwarding information of this VLAN. |
| INT mpVlanTpFdbIntfNumber | 1.3.6.1.4.1.119.2.3.3.13.4.10.1.3 | INTEGER | read-only | Either the value '0', or the port number of the port from which the frame, which has a source address equal to the value of the 'mpVlanTPFdbMacAddress', was received. A value of '0' indicates that the port number has not been learned but that the bridge does have some forwarding information about this address. |
| INT mpVlanTpFdbStatus | 1.3.6.1.4.1.119.2.3.3.13.4.10.1.4 | INTEGER | read-only | The state of this entry. If it is '1', this entry is none of the following. If it is '2', this entry is not longer valie, but has not yet been flushed from the table. If it is '3', this entry was learned, and is being used. If it is '4', this entry is the bridge's MAC addresses. If it is '5', this entry is the MAC address which was registered as filtering condition. |
| INT mpVlanTagProtocolId | 1.3.6.1.4.1.119.2.3.3.13.4.11 | INTEGER | read-write | Indicates VLAN Tag Protocol ID used in this system. Range of VLAN Tag Protocol ID is from 1501(0x05dd) to 65535(0xffff) except 2048(0x0800), 2054(0x0806). |
| mpVlanTagPpTable | 1.3.6.1.4.1.119.2.3.3.13.4.12 | not-accessible | It is used for VLAN Tag PP(Point-to-Point) configuration. | |
| mpVlanTagPpEntry | 1.3.6.1.4.1.119.2.3.3.13.4.12.1 | not-accessible | Indicates the table entry of the VLAN Tag PP configuration. | |
| INT mpVlanTagPpIndex | 1.3.6.1.4.1.119.2.3.3.13.4.12.1.1 | INTEGER | read-only | Indicates the specified number to identify the VLAN Tag PP. |
| INT mpVlanTagPpRtrIndex | 1.3.6.1.4.1.119.2.3.3.13.4.12.1.2 | INTEGER | read-only | Indicates the interface number assigned to the VLAN Tag PP uniquely, within the equipment. The VLAN Tag PP identified by this object is the same VLAN Tag PP identified by the same number of ifIndex. |
| INT mpVlanTagPpIntfNumber | 1.3.6.1.4.1.119.2.3.3.13.4.12.1.3 | INTEGER | read-write | This is the index to identify the Ethernet port number or PPP port number subscribed to this VLAN Tag PP. The value of this index is the same as ifIndex. |
| STR mpVlanTagPpName | 1.3.6.1.4.1.119.2.3.3.13.4.12.1.4 | DisplayString | read-write | Indicates the name which is assigned to the VLAN Tag PP for administrative purpose. It is used to assign or change the name of VLAN Tag PP. |
| INT mpVlanTagPpMacType | 1.3.6.1.4.1.119.2.3.3.13.4.12.1.5 | INTEGER | read-write | Indicates the MAC address type. If the value is set to '1', global MAC address of the physical port is used. If the value is set to '2', private MAC address given by user (first 4 octets) is used. In case of 2, the last two octets is given by the value of the mpVlanTagPpIndex. |
| INT mpVlanTagPpNameStatus | 1.3.6.1.4.1.119.2.3.3.13.4.12.1.6 | INTEGER | read-write | This object is used to register or delete the VLAN Tag PP. |
| mpBridge | 1.3.6.1.4.1.119.2.3.3.13.5 | |||
| mpBrgDestMacFilterTable | 1.3.6.1.4.1.119.2.3.3.13.5.1 | not-accessible | This is the table type object of the filter condition concerning to the destination MAC address. | |
| mpBrgDestMacFilterEntry | 1.3.6.1.4.1.119.2.3.3.13.5.1.1 | not-accessible | This is the table entry of mpBrgDestMacFilterTable. | |
| INT mpBrgDestMacFilterVlanIndex | 1.3.6.1.4.1.119.2.3.3.13.5.1.1.1 | INTEGER | read-only | This is the index to identify the VLAN to which this filter condition is applied. |
| MAC mpBrgDestMacFilterAddress | 1.3.6.1.4.1.119.2.3.3.13.5.1.1.2 | MacAddress | read-only | This object is the destination MAC address which is filtered in this VLAN. |
| INT mpBrgDestMacFilterStatus | 1.3.6.1.4.1.119.2.3.3.13.5.1.1.3 | INTEGER | read-write | This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry. |
| mpBrgSrcMacFilterTable | 1.3.6.1.4.1.119.2.3.3.13.5.2 | not-accessible | This is the table type object of the filter condition concerning to the source MAC address. | |
| mpBrgSrcMacFilterEntry | 1.3.6.1.4.1.119.2.3.3.13.5.2.1 | not-accessible | This is the table entry of mpBrgSrcMacFilterTable. | |
| INT mpBrgSrcMacFilterVlanIndex | 1.3.6.1.4.1.119.2.3.3.13.5.2.1.1 | INTEGER | read-only | This is the index to identify the VLAN to which this filter condition is applied. |
| MAC mpBrgSrcMacFilterAddress | 1.3.6.1.4.1.119.2.3.3.13.5.2.1.2 | MacAddress | read-only | This object is the source MAC address which is filtered in this VLAN. |
| INT mpBrgSrcMacFilterStatus | 1.3.6.1.4.1.119.2.3.3.13.5.2.1.3 | INTEGER | read-write | This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry. |
| mpBrgDestPortFilterTable | 1.3.6.1.4.1.119.2.3.3.13.5.3 | not-accessible | This is the table type ofject of the filter condition concerning to the destination port. | |
| mpBrgDestPortFilterEntry | 1.3.6.1.4.1.119.2.3.3.13.5.3.1 | not-accessible | This is the table entry of mpBrgDestPortFilterTable. | |
| INT mpBrgDestPortFilterIfIndex | 1.3.6.1.4.1.119.2.3.3.13.5.3.1.1 | INTEGER | read-only | This is the index to identify the destination port to which the filtering function is applied. The value of this index is the same as IfIndex. |
| INT mpBrgDestPortFilterStatus | 1.3.6.1.4.1.119.2.3.3.13.5.3.1.2 | INTEGER | read-write | This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry. |
| mpBrgSrcPortFilterTable | 1.3.6.1.4.1.119.2.3.3.13.5.4 | not-accessible | This is the table type ofject of the filter condition concerning to the source port. | |
| mpBrgSrcPortFilterEntry | 1.3.6.1.4.1.119.2.3.3.13.5.4.1 | not-accessible | This is the table entry of mpBrgSrcPortFilterTable. | |
| INT mpBrgSrcPortFilterIfIndex | 1.3.6.1.4.1.119.2.3.3.13.5.4.1.1 | INTEGER | read-only | This is the index to identify the source port to which the filtering function is applied. The value of this index is the same as IfIndex. |
| INT mpBrgSrcPortFilterStatus | 1.3.6.1.4.1.119.2.3.3.13.5.4.1.2 | INTEGER | read-write | This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry. |
| mpDbAccess | 1.3.6.1.4.1.119.2.3.3.13.6 | |||
| INT mpDbAccessSave | 1.3.6.1.4.1.119.2.3.3.13.6.1 | INTEGER | read-write | Signal the system applications to save their config. |
| INT mpDbAccessAllSave | 1.3.6.1.4.1.119.2.3.3.13.6.2 | INTEGER | read-write | Signal the system applications to save their all config. |
| mpEventLog | 1.3.6.1.4.1.119.2.3.3.13.7 | |||
| INT mpEventLogAttribute | 1.3.6.1.4.1.119.2.3.3.13.7.1 | INTEGER | read-write | Specifies the type of logging for the events. |
| INT mpEventLogSize | 1.3.6.1.4.1.119.2.3.3.13.7.2 | INTEGER | read-write | Specifies the log size. |
| INT mpEventLoggingFilter | 1.3.6.1.4.1.119.2.3.3.13.7.3 | INTEGER | read-write | Specifies filtering to be applied to incoming events. Bit mapped. |
| INT mpEventLogEarliestEvent | 1.3.6.1.4.1.119.2.3.3.13.7.4 | INTEGER | read-only | Specifies the index of the earliest event in the log. |
| INT mpEventLogLatestEvent | 1.3.6.1.4.1.119.2.3.3.13.7.5 | INTEGER | read-only | Specifies the index of the latest event in the log. |
| INT mpEventLogNumEntries | 1.3.6.1.4.1.119.2.3.3.13.7.6 | INTEGER | read-only | Specifies the number of entries in the log. |
| INT mpEventLogCriticalEvents | 1.3.6.1.4.1.119.2.3.3.13.7.7 | INTEGER | read-only | Number of critical events in the log. |
| INT mpEventLogMajorEvents | 1.3.6.1.4.1.119.2.3.3.13.7.8 | INTEGER | read-only | Number of major events in the log. |
| INT mpEventLogMinorEvents | 1.3.6.1.4.1.119.2.3.3.13.7.9 | INTEGER | read-only | Number of minor events in the log. |
| INT mpEventLogWarningEvents | 1.3.6.1.4.1.119.2.3.3.13.7.10 | INTEGER | read-only | Number of warning events in the log. |
| INT mpEventLogInformationalEvents | 1.3.6.1.4.1.119.2.3.3.13.7.11 | INTEGER | read-only | Number of informational events in the log. |
| INT mpEventLogClearAll | 1.3.6.1.4.1.119.2.3.3.13.7.12 | INTEGER | read-write | Clear the log if set to clear. |
| INT mpEventLogClearSeverity | 1.3.6.1.4.1.119.2.3.3.13.7.13 | INTEGER | read-write | Deletes entries in the log with specified severity. |
| STR mpEventLogClearPeriod | 1.3.6.1.4.1.119.2.3.3.13.7.14 | DisplayString | read-write | Deletes entries in the log within the specified period. format : yyyy/[m]m/[d]d yyyy/m[m]/[d]d yyyy year mm month dd day |
| mpEventTable | 1.3.6.1.4.1.119.2.3.3.13.7.15 | not-accessible | Event related details. | |
| mpEventEntry | 1.3.6.1.4.1.119.2.3.3.13.7.15.1 | not-accessible | Details for particular event. | |
| INT mpEventIndex | 1.3.6.1.4.1.119.2.3.3.13.7.15.1.1 | INTEGER | read-only | Index to the event in the table. |
| INT mpEventSource | 1.3.6.1.4.1.119.2.3.3.13.7.15.1.2 | INTEGER | read-only | Indicates any code that may be associated with the source of the event. If no source is associated defaults to 0. |
| INT mpEventCode | 1.3.6.1.4.1.119.2.3.3.13.7.15.1.3 | INTEGER | read-only | Indicates any code that may be associated with the event for further details. If no code is associated defaults to 0. |
| STR mpEventTimeStamp | 1.3.6.1.4.1.119.2.3.3.13.7.15.1.4 | DisplayString | read-only | Timestamp of the event. |
| INT mpEventSeverity | 1.3.6.1.4.1.119.2.3.3.13.7.15.1.5 | INTEGER | read-only | Indicates event severity. |
| STR mpEventDescription | 1.3.6.1.4.1.119.2.3.3.13.7.15.1.6 | DisplayString | read-only | Brief description of the recorded event. |
| mpTrapFilterTable | 1.3.6.1.4.1.119.2.3.3.13.7.16 | not-accessible | Indicates the table of Trap Filter Information. | |
| mpTrapFilterEntry | 1.3.6.1.4.1.119.2.3.3.13.7.16.1 | not-accessible | Indicates the entry of Trap Filter Information. | |
| INT mpTrapFilterGeneric | 1.3.6.1.4.1.119.2.3.3.13.7.16.1.1 | INTEGER | read-only | This object is the generic-trap to identify the trap to which this filter condition is applied. |
| INT mpTrapFilterSpecific | 1.3.6.1.4.1.119.2.3.3.13.7.16.1.2 | INTEGER | read-only | This object is the specific-trap to identify the trap to which this filter condition is applied. |
| OID mpTrapFilterEnterprise | 1.3.6.1.4.1.119.2.3.3.13.7.16.1.3 | OBJECT IDENTIFIER | read-only | This object is the enterprise-trap to identify the trap to which this filter condition is applied. |
| INT mpTrapFilterStatus | 1.3.6.1.4.1.119.2.3.3.13.7.16.1.4 | INTEGER | read-write | This object specifies validity of trap filter. |
| STR mpTrapFilterName | 1.3.6.1.4.1.119.2.3.3.13.7.16.1.5 | DisplayString | read-only | This object is the name of the trap to be displayed. |
| mpEventTrapSeverityTable | 1.3.6.1.4.1.119.2.3.3.13.7.17 | not-accessible | Control Severity of Trap | |
| mpEventTrapSeverityEntry | 1.3.6.1.4.1.119.2.3.3.13.7.17.1 | not-accessible | severity of SpecificTrap | |
| INT mpEventTrapSeverityIndex | 1.3.6.1.4.1.119.2.3.3.13.7.17.1.1 | INTEGER | read-only | Index of Trap Severity Table |
| INT mpEventTrapCode | 1.3.6.1.4.1.119.2.3.3.13.7.17.1.2 | INTEGER | read-only | EventCode |
| INT mpEventTrapSeverity | 1.3.6.1.4.1.119.2.3.3.13.7.17.1.3 | INTEGER | read-write | Severity of Trap |
| STR mpEventTrapDescription | 1.3.6.1.4.1.119.2.3.3.13.7.17.1.4 | DisplayString | read-only | Information of Trap |
| TIK mpEventLogAlmRenewalTimeStamp | 1.3.6.1.4.1.119.2.3.3.13.7.18 | TimeTicks | read-only | SysUpTime of Alm State Change |
| mpUiSession | 1.3.6.1.4.1.119.2.3.3.13.8 | |||
| mpUiSessionTable | 1.3.6.1.4.1.119.2.3.3.13.8.1 | not-accessible | Table that describes active connections. | |
| mpUiSessionEntry | 1.3.6.1.4.1.119.2.3.3.13.8.1.1 | not-accessible | Describes each node in the session table. | |
| INT mpUiSessionPort | 1.3.6.1.4.1.119.2.3.3.13.8.1.1.1 | INTEGER | read-only | The telnet port/async port that the session is using. |
| STR mpUiSessionTime | 1.3.6.1.4.1.119.2.3.3.13.8.1.1.2 | DisplayString | read-only | The starting time of the session |
| INT mpUiSessionUserStatus | 1.3.6.1.4.1.119.2.3.3.13.8.1.1.3 | INTEGER | read-only | Status of the session user. |
| INT mpUiSessionStatus | 1.3.6.1.4.1.119.2.3.3.13.8.1.1.4 | INTEGER | read-write | Session validity |
| mpFtp | 1.3.6.1.4.1.119.2.3.3.13.9 | |||
| INT mpFtpServerStatus | 1.3.6.1.4.1.119.2.3.3.13.9.1 | INTEGER | read-write | This object controls the operating status of FTP server. The value '1' is set to enable the FTP server functionality, and the value '2' is set to disable the FTP server functionality. |
| mpDhcp | 1.3.6.1.4.1.119.2.3.3.13.10 | |||
| CTR mpDhcpRelayRequests | 1.3.6.1.4.1.119.2.3.3.13.10.1 | Counter | read-only | This object is the counter of the total number of received Dhcp Relay request. |
| CTR mpDhcpRelayReplys | 1.3.6.1.4.1.119.2.3.3.13.10.2 | Counter | read-only | This is the counter of the total number of received Dhcp Relay reply. |
| CTR mpDhcpRelayRequestDiscards | 1.3.6.1.4.1.119.2.3.3.13.10.3 | Counter | read-only | This is the counter of the total number of discarded Dhcp Relay request. |
| CTR mpDhcpRelayReplyDiscards | 1.3.6.1.4.1.119.2.3.3.13.10.4 | Counter | read-only | This is the counter of the total number of discareded Dhcp Relay reply. |
| INT mpDhcpRelayEnable | 1.3.6.1.4.1.119.2.3.3.13.10.5 | INTEGER | read-only | The current operational state of the Dhcp Relay Agent. This object is changed to '1' automatically, when mpDhcpRelayIfTable is created initially. Vice versa, this object is changed to '2' automatically, when mpDhcpRelayIfTable is deleted lastly. The default value of this object is '2'. |
| INT mpDhcpRelayMaxHops | 1.3.6.1.4.1.119.2.3.3.13.10.6 | INTEGER | read-write | This object specifies the maximum number of the hop count of Dhcp Relay Agent. The value of this object must be within the range of 1 - 16. The default value of this object is 4. |
| mpDhcpRelayIfTable | 1.3.6.1.4.1.119.2.3.3.13.10.8 | not-accessible | This is the table type object of the Dhcp Relay Agent interface data. | |
| mpDhcpRelayIfEntry | 1.3.6.1.4.1.119.2.3.3.13.10.8.1 | not-accessible | This object is the table entry of mpDhcpRelayIfTable. | |
| INT mpDhcpRelayIfEntIfIndex | 1.3.6.1.4.1.119.2.3.3.13.10.8.1.1 | INTEGER | read-only | This is the index to identify the router interface. The value of this index is the same as ifIndex. |
| INT mpDhcpRelayIfEntTransMode | 1.3.6.1.4.1.119.2.3.3.13.10.8.1.2 | INTEGER | read-write | The type of Transfer Mode. The default value of this object is '1'. |
| CTR mpDhcpRelayIfEntRequests | 1.3.6.1.4.1.119.2.3.3.13.10.8.1.3 | Counter | read-only | This object is the counter of the total number of received BOOTP-REQUEST from this interface. |
| CTR mpDhcpRelayIfEntReplies | 1.3.6.1.4.1.119.2.3.3.13.10.8.1.4 | Counter | read-only | This is the counter of the total number of attempt to transmit BOOTP-REPLY to this interface. |
| CTR mpDhcpRelayIfEntRequestTransmits | 1.3.6.1.4.1.119.2.3.3.13.10.8.1.5 | Counter | read-only | This object is the counter of the total number of transmitted BOOTP-REQUEST. |
| CTR mpDhcpRelayIfEntRequestDiscards | 1.3.6.1.4.1.119.2.3.3.13.10.8.1.6 | Counter | read-only | This is the counter of the total number of discarded BOOTP-REQUEST. |
| CTR mpDhcpRelayIfEntReplyDiscards | 1.3.6.1.4.1.119.2.3.3.13.10.8.1.7 | Counter | read-only | This is the counter of the total number of discareded BOOTP-REPLY. |
| INT mpDhcpRelayIfEntStatus | 1.3.6.1.4.1.119.2.3.3.13.10.8.1.8 | INTEGER | read-write | This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry. |
| mpDhcpRelayAddrTable | 1.3.6.1.4.1.119.2.3.3.13.10.9 | not-accessible | This is the table type object of the Dhcp Relay Agent Destination IP Address data. | |
| mpDhcpRelayAddrEntry | 1.3.6.1.4.1.119.2.3.3.13.10.9.1 | not-accessible | This object is the table entry of mpDhcpRelayAddrTable. | |
| INT mpDhcpRelayAddrEntIfIndex | 1.3.6.1.4.1.119.2.3.3.13.10.9.1.1 | INTEGER | read-write | This is the index to identify the router interface. The value of this index is the same as ifIndex. |
| IP mpDhcpRelayAddrEntAddr | 1.3.6.1.4.1.119.2.3.3.13.10.9.1.2 | IpAddress | read-write | This object specifies the relaying destination IP address. |
| INT mpDhcpRelayAddrEntStatus | 1.3.6.1.4.1.119.2.3.3.13.10.9.1.3 | INTEGER | read-write | This object is used to create or delete the table entry. The value '1' is set to create the entry, and the value '2' is set to delete the entry. |
| mpIp | 1.3.6.1.4.1.119.2.3.3.13.11 | |||
| mpIpFilterExcludeTable | 1.3.6.1.4.1.119.2.3.3.13.11.3 | not-accessible | This is the table type object of IP address excluding filter condition. Table of Exclude IP Filter. | |
| mpIpFilterExcludeEntry | 1.3.6.1.4.1.119.2.3.3.13.11.3.1 | not-accessible | This is the table entry of mpIpFilterExcludeTable. Exclude IP Filter fields. | |
| INT mpIpFilterExEntIndex | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.1 | INTEGER | read-only | This is the index to identify the IP address excluding filter entry. |
| INT mpIpFilterExEntInIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.2 | INTEGER | read-write | This object specifies the input interface number to which the excluding filter is applied. The value of this object is the same as IfIndex of VLAN/LIS interface. |
| INT mpIpFilterExEntOutIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.3 | INTEGER | read-write | This object specifies the output interface number to which the excluding filter is applied. The value of this object is the same as IfIndex of VLAN/LIS interface. |
| IP mpIpFilterExEntSrcIpAddr | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.4 | IpAddress | read-write | This object specifies the source IP address to which the excluding filter is applied. |
| IP mpIpFilterExEntSrcAddrMask | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.5 | IpAddress | read-write | This object specifies the source IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored. |
| IP mpIpFilterExEntDestIpAddr | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.6 | IpAddress | read-write | This object specifies the destination IP address to which the excluding filter is applied. |
| IP mpIpFilterExEntDestAddrMask | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.7 | IpAddress | read-write | This object specifies the destination IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored. |
| INT mpIpFilterExEntIpOptions | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.8 | INTEGER | read-write | This object specifies the IP option to which the excluding filter is applied. In case all the option is specified, the value '255' is set to this object. In case no option is specified, the value '0' is set to this object. |
| INT mpIpFilterExEntIpProcNumber | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.9 | INTEGER | read-write | This obeject specifies the protocol to which the excluding filter is applied. In case of ICMP, the value '1' is set to this object. In case of TCP, the value '6' is set to this object. In case of UDP, the value '17' is set to this object. |
| INT mpIpFilterExEntSrcPort | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.10 | INTEGER | read-write | This object specifies the receiving TCP/UDP port number to which the excluding filter is applied. |
| INT mpIpFilterExEntDestPort | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.11 | INTEGER | read-write | This object specifies the sending TCP/UDP port number to which the excluding filter is applied. |
| INT mpIpFilterExEntTcpAckOffSegment | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.12 | INTEGER | read-write | This object specifies the pakcket handling method corresponding to the ACK bit of TCP header. In case of discarding packet when ACK is off, the value '1' is set to this object. In case of not discarding packet when ACK is off, the value '2' is set to this object. |
| INT mpIpFilterExEntIcmpSend | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.13 | INTEGER | read-write | This object specifies the ICMP(error) sending method when a packet is discarded by IP filtering function. In case of sending ICMP error packet, the value '1' is set to this object. In case of not sending ICMP error packet, the value '2' is set to this object. |
| INT mpIpFilterExEntEventLogging | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.14 | INTEGER | read-write | This object specifies the event handling method when a packet is discarded by IP filtering function. In case of reporting it by event, the value '1' is set to this object. In case of not reporting it by event, the value '2' is set to this object. |
| ROW mpIpFilterExEntStatus | 1.3.6.1.4.1.119.2.3.3.13.11.3.1.15 | RowStatus | read-write | This object is used to create, delete, or modify this table entry. |
| mpIpFilterIncludeTable | 1.3.6.1.4.1.119.2.3.3.13.11.4 | not-accessible | This is the table type object of IP pass-filter condition data. | |
| mpIpFilterIncludeEntry | 1.3.6.1.4.1.119.2.3.3.13.11.4.1 | not-accessible | This is the table entry of mpIpFilterIncludeTable. | |
| INT mpIpFilterInEntIndex | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.1 | INTEGER | read-only | This is the index to identify the IP pass-filter condition table entry. |
| INT mpIpFilterInEntInIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.2 | INTEGER | read-write | This object specifies the input interface to which the IP pass-filter is applied. The value of this index is the same as IfIndex of VLAN/LIS interface. |
| INT mpIpFilterInEntOutIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.3 | INTEGER | read-write | This object specifies the output interface to which the IP pass-filter is applied. The value of this index is the same as IfIndex of VLAN/LIS interface. |
| IP mpIpFilterInEntSrcIpAddr | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.4 | IpAddress | read-write | This object specifies the source IP address to which the IP pass-filter is applied. |
| IP mpIpFilterInEntSrcAddrMask | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.5 | IpAddress | read-write | This object specified the source IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored. |
| IP mpIpFilterInEntDestIpAddr | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.6 | IpAddress | read-write | This object specifies the destination IP address to which the IP pass-filter is applied. |
| IP mpIpFilterInEntDestAddrMask | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.7 | IpAddress | read-write | This object specified the destination IP address mask. '1' bit is set corresponding to the IP address part which is to be ignored. |
| INT mpIpFilterInEntIpOptions | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.8 | INTEGER | read-write | This object specifies the IP option to which the IP pass-filter is applied. In case all the option is specified, the value '255' is set to this object. In case no option is specified, the value '0' is set to this object. |
| INT mpIpFilterInEntIpProcNumber | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.9 | INTEGER | read-write | This obeject specifies the protocol to which the IP pass-filter is applied. In case of ICMP, the value '1' is set to this object. In case of TCP, the value '6' is set to this object. In case of UDP, the value '17' is set to this object. |
| INT mpIpFilterInEntSrcPort | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.10 | INTEGER | read-write | This object specifies the receiving TCP/UDP port number to which the IP pass-filter is applied. |
| INT mpIpFilterInEntDestPort | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.11 | INTEGER | read-write | This object specifies the sending TCP/UDP port number to which the IP pass-filter is applied. |
| INT mpIpFilterInEntTcpAckOffSegment | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.12 | INTEGER | read-write | This object specifies the pakcket handling method corresponding to the ACK bit of TCP header. In case of discarding packet when ACK is off, the value '1' is set to this object. In case of not discarding packet when ACK is off, the value '2' is set to this object. |
| INT mpIpFilterInEntLifeTime | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.13 | INTEGER | read-write | This object specifies the valid time period of this IP pass-filter condition. When the valid time period expired, this entry is deleted automatically. In case of setting the value '0' to this object, this IP pass-filter condition lasts until it is deleted by operator command. |
| ROW mpIpFilterInEntStatus | 1.3.6.1.4.1.119.2.3.3.13.11.4.1.14 | RowStatus | read-write | This object is used to create, delete, or modify this table entry. |
| CTR mpIpInFilterDiscards | 1.3.6.1.4.1.119.2.3.3.13.11.5 | Counter | read-only | This object is the counter of total number of the receiving packets discarded by this IP filter. |
| CTR mpIpOutFilterDiscards | 1.3.6.1.4.1.119.2.3.3.13.11.6 | Counter | read-only | This object is the counter of total number of the receiving packets discarded by this IP filter. |
| mpIpStaticRouteTable | 1.3.6.1.4.1.119.2.3.3.13.11.7 | not-accessible | The table of static route. | |
| mpIpStaticRouteEntry | 1.3.6.1.4.1.119.2.3.3.13.11.7.1 | not-accessible | A entry of static route. | |
| IP mpIpStaticRouteDest | 1.3.6.1.4.1.119.2.3.3.13.11.7.1.1 | IpAddress | read-only | This object specifies destination IP Address of static route. |
| IP mpIpStaticRouteMask | 1.3.6.1.4.1.119.2.3.3.13.11.7.1.2 | IpAddress | read-only | This object specifies network mask of static route. |
| IP mpIpStaticRouteNextHop | 1.3.6.1.4.1.119.2.3.3.13.11.7.1.3 | IpAddress | read-only | This object specifies next-hop IP Address of static route. The value 0 is specified when route type is 'other','reject' or' local'. |
| INT mpIpStaticRouteIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.7.1.4 | INTEGER | read-write | This object specifies the outgoing ifIndex. |
| INT mpIpStaticRouteType | 1.3.6.1.4.1.119.2.3.3.13.11.7.1.5 | INTEGER | read-write | This object specifies the route type. The route type other(1) is not reflected to IP routing table. The route type reject(2) is used to discard corresponding IP packet. |
| INT mpIpStaticRoutePriority | 1.3.6.1.4.1.119.2.3.3.13.11.7.1.6 | INTEGER | read-write | This object specifies route priority. The entry which route priority is the smallest in usable next-hop is reflected to IP routing table when route priority is different in every next-hop at the case of multi-path. |
| INT mpIpStaticRouteTag | 1.3.6.1.4.1.119.2.3.3.13.11.7.1.7 | INTEGER | read-write | This object specifies route tag. In case route type is 'reject', setting to this object is prohibited. |
| INT mpIpStaticRouteStatus | 1.3.6.1.4.1.119.2.3.3.13.11.7.1.8 | INTEGER | read-write | This object specifies status of this entry. When entry is deleted, invalid(2) is set. |
| mpIpRoutePriorityTable | 1.3.6.1.4.1.119.2.3.3.13.11.8 | not-accessible | The route priority table of the routing protocol unit. The value of this table is the default value of each routing protocol of this system. It is used for tie-break when the requirement of the addition of routing table for the same network from plural routing protocols occur and route priority is the same. | |
| mpIpRoutePriorityEntry | 1.3.6.1.4.1.119.2.3.3.13.11.8.1 | not-accessible | A route priority entry of the routing protocol. | |
| INT mpIpRoutePriorityProtocol | 1.3.6.1.4.1.119.2.3.3.13.11.8.1.1 | INTEGER | read-only | This object specifies the protocol of IP routing table. |
| INT mpIpRoutePriorityValue | 1.3.6.1.4.1.119.2.3.3.13.11.8.1.2 | INTEGER | read-only | This object specifies route priority value. |
| mpIpImportListTable | 1.3.6.1.4.1.119.2.3.3.13.11.9 | not-accessible | The table which is used to distribute route information to different routing protocol. It defines condition of routing table to be distributed and value to be used at distributing. | |
| mpIpImportListEntry | 1.3.6.1.4.1.119.2.3.3.13.11.9.1 | not-accessible | The entry which is used to distribute route information to different routing protocol. | |
| INT mpIpImportListNumber | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.1 | INTEGER | read-only | This object specifies import-list number. |
| INT mpIpImportListAction | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.2 | INTEGER | read-write | This object specifies whether routing table corresponding to the condition is distributed or ignored. |
| INT mpIpImportListConIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.3 | INTEGER | read-write | This object specifies a condition by the outgoing interface. The value 0 means it is outside of the condition decision. |
| IP mpIpImportListConNetAddr | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.4 | IpAddress | read-write | This object specifies the network address. It is shared with the network condition and the range condition. |
| IP mpIpImportListConNetMask | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.5 | IpAddress | read-write | This object specifies the network mask. It is shared with the network condition and the range condition. |
| INT mpIpImportListConNetStatus | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.6 | INTEGER | read-write | This object specifies the status of condition about network address. |
| INT mpIpImportListConRangeStatus | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.7 | INTEGER | read-write | This object specifies the status of condition about network address range. |
| IP mpIpImportListConNextHop | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.8 | IpAddress | read-write | This object specifies the condition about next-hop. The value 0 means it is outside of the condition decision. |
| IP mpIpImportListConSource | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.9 | IpAddress | read-write | This object specifies IP address or router ID of advertising router. |
| INT mpIpImportListConSourceStatus | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.10 | INTEGER | read-write | This object specifies the status of condition about advertising router. |
| INT mpIpImportListConMetric | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.11 | INTEGER | read-write | This object specifies the condition about metric. The value 0 means it is outside of the condition decision. |
| INT mpIpImportListConRouteType | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.12 | INTEGER | read-write | This object specifies the condition about route type. The value 0 means it is outside of the condition decision. |
| INT mpIpImportListConTag | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.13 | INTEGER | read-write | This object specifies route tag. |
| INT mpIpImportListConTagStatus | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.14 | INTEGER | read-write | This object specifies the status of condition about route tag. |
| INT mpIpImportListConPId | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.15 | INTEGER | read-write | This object specifies the condition about protocol ID. The value 0 means it is outside of the condition decision. |
| IP mpIpImportListSetNetAddr | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.16 | IpAddress | read-write | This object specifies the network address which is applied when routing table corresponding to the condition is distributed. |
| IP mpIpImportListSetNetMask | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.17 | IpAddress | read-write | This object specifies the mask address which is applied when routing table corresponding to the condition is distributed. |
| INT mpIpImportListSetNetStatus | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.18 | INTEGER | read-write | This object specifies the status of network address which is applied when routing table corresponding to the condition is distributed. |
| INT mpIpImportListSetMetric | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.19 | INTEGER | read-write | This object specifies the metric value which is applied when routing table corresponding to the condition is distributed. |
| IP mpIpImportListSetNextHop | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.20 | IpAddress | read-write | This object specifies the next-hop IP address which is applied when routing table corresponding to the condition is distributed. |
| INT mpIpImportListSetTag | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.21 | INTEGER | read-write | This object specifies the route tag which is applied when routing table corresponding to the condition is distributed. |
| INT mpIpImportListSetRouteType | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.22 | INTEGER | read-write | This object specifies the external route type which is applied when routing table corresponding to the condition is distributed to OSPF. |
| INT mpIpImportListTableStatus | 1.3.6.1.4.1.119.2.3.3.13.11.9.1.23 | INTEGER | read-write | This object specifies status of this entry. When entry is deleted, invalid(2) is set. |
| mpIpVpnTable | 1.3.6.1.4.1.119.2.3.3.13.11.10 | not-accessible | The table of addressing information relevant to this entity's ifIndex. | |
| mpIpVpnEntry | 1.3.6.1.4.1.119.2.3.3.13.11.10.1 | not-accessible | The addressing information for one of this entity's ifIndex. | |
| INT mpIpVpnIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.10.1.1 | INTEGER | read-only | The index value which uniquely identifies the interface to which this entry is applicable. The interface referred by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| INT mpIpVpnId | 1.3.6.1.4.1.119.2.3.3.13.11.10.1.2 | INTEGER | read-write | This is the index to identify VPN the entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535. |
| mpIpVpnIpGroupTable | 1.3.6.1.4.1.119.2.3.3.13.11.11 | not-accessible | The table of IP group information relevant to this entity's VPNID. | |
| mpIpVpnIpGroupEntry | 1.3.6.1.4.1.119.2.3.3.13.11.11.1 | not-accessible | The IP group information for one of this entity's VPNID. | |
| INT mpIpVpnIpGroupVpnId | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.1 | INTEGER | read-only | This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535. |
| INT mpIpVpnIpForwarding | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.2 | INTEGER | read-write | The indication of whether this entity is acting as an IP gateway in respect to the forwarding of datagrams received by, but not addressed to, this entity. IP gateways forward datagrams. IP hosts do not (except those source-routed via the host). Note that for some managed nodes, this object may take on only a subset of the values possible. Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to change this object to an inappropriate value. |
| INT mpIpVpnIpDefaultTTL | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.3 | INTEGER | read-write | The default value inserted into the Time-To-Live field of the IP header of datagrams originated at this entity, whenever a TTL value is not supplied by the transport layer protocol. |
| CTR mpIpVpnIpInReceives | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.4 | Counter | read-only | The total number of input datagrams received from interfaces, including those received in error. |
| CTR mpIpVpnIpInHdrErrors | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.5 | Counter | read-only | The number of input datagrams discarded due to errors in their IP headers, including bad checksums, version number mismatch, other format errors, time-to-live exceeded, errors discovered in processing their IP options, etc. |
| CTR mpIpVpnIpInAddrErrors | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.6 | Counter | read-only | The number of input datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., 0.0.0.0) and addresses of unsupported Classes (e.g., Class E). For entities which are not IP Gateways and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. |
| CTR mpIpVpnIpForwDatagrams | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.7 | Counter | read-only | The number of input datagrams for which this entity was not their final IP destination, as a result of which an attempt was made to find a route to forward them to that final destination. In entities which do not act as IP Gateways, this counter will include only those packets which were Source-Routed via this entity, and the Source- Route option processing was successful. |
| CTR mpIpVpnIpInUnknownProtos | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.8 | Counter | read-only | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| CTR mpIpVpnIpInDiscards | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.9 | Counter | read-only | The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. |
| CTR mpIpVpnIpInDelivers | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.10 | Counter | read-only | The total number of input datagrams successfully delivered to IP user-protocols (including ICMP). |
| CTR mpIpVpnIpOutRequests | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.11 | Counter | read-only | The total number of IP datagrams which local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in ipForwDatagrams. |
| CTR mpIpVpnIpOutDiscards | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.12 | Counter | read-only | The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in ipForwDatagrams if any such packets met this (discretionary) discard criterion. |
| CTR mpIpVpnIpOutNoRoutes | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.13 | Counter | read-only | The number of IP datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets counted in ipForwDatagrams which meet this `no-route' criterion. Note that this includes any datagarms which a host cannot route because all of its default gateways are down. |
| INT mpIpVpnIpReasmTimeout | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.14 | INTEGER | read-only | The maximum number of seconds which received fragments are held while they are awaiting reassembly at this entity. |
| CTR mpIpVpnIpReasmReqds | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.15 | Counter | read-only | The number of IP fragments received which needed to be reassembled at this entity. |
| CTR mpIpVpnIpReasmOKs | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.16 | Counter | read-only | The number of IP datagrams successfully re- assembled. |
| CTR mpIpVpnIpReasmFails | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.17 | Counter | read-only | The number of failures detected by the IP re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. |
| CTR mpIpVpnIpFragOKs | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.18 | Counter | read-only | The number of IP datagrams that have been successfully fragmented at this entity. |
| CTR mpIpVpnIpFragFails | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.19 | Counter | read-only | The number of IP datagrams that have been discarded because they needed to be fragmented at this entity but could not be, e.g., because their Don't Fragment flag was set. |
| CTR mpIpVpnIpFragCreates | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.20 | Counter | read-only | The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. |
| CTR mpIpVpnIpRoutingDiscards | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.21 | Counter | read-only | The number of routing entries which were chosen to be discarded even though they are valid. One possible reason for discarding such an entry could be to free-up buffer space for other routing. |
| CTR mpIpVpnIpInFilterDiscards | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.22 | Counter | read-only | This object is the counter of total number of the receiving packets discarded by this IP filter. |
| CTR mpIpVpnIpOutFilterDiscards | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.23 | Counter | read-only | This object is the counter of total number of the receiving packets discarded by this IP filter. |
| INT mpIpVpnIpGroupStatus | 1.3.6.1.4.1.119.2.3.3.13.11.11.1.24 | INTEGER | read-write | When an entry is created it autmatically becomes valid(1). When this object is set to invalid(2) then this entry will be deleted. |
| mpIpVpnIpAddrTable | 1.3.6.1.4.1.119.2.3.3.13.11.12 | not-accessible | The table of addressing information relevant to this entity's VPNID & IP addresses. | |
| mpIpVpnIpAddrEntry | 1.3.6.1.4.1.119.2.3.3.13.11.12.1 | not-accessible | The addressing information for one of this entity's VPNID & IP addresses. | |
| INT mpIpVpnIpAdEntVpnId | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.1 | INTEGER | read-only | This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535. |
| INT mpIpVpnIpAdEntIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.2 | INTEGER | read-only | The index value which uniquely identifies the interface to which this entry is applicable. The interface referred by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| IP mpIpVpnIpAdEntAddr | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.3 | IpAddress | read-only | The IP address to which this entry's addressing information pertains. This IP address must always be a unicast IP address and it should never be a Class D or E IP address. |
| IP mpIpVpnIpAdEntNetMask | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.4 | IpAddress | read-write | The subnet mask associated with the IP address of this entry. The value of this object is an IP address with the network part bits set to all 1's and all the hosts part bits set to all 0's. |
| INT mpIpVpnIpAdEntBcastAddr | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.5 | INTEGER | read-write | The value of this object is the broadcast IP address for this entry. The broadcast IP address is the the IP address with the host part bits set to all 1's or all 0's. |
| INT mpIpVpnIpAdEntReasmMaxSize | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.6 | INTEGER | read-only | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| INT mpIpVpnIpAdEntStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.7 | INTEGER | read-write | When an entry is created it autmatically becomes valid(1). When this object is set to invalid(2) then this entry will be deleted. |
| INT mpIpVpnIpAdEntEncapType | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.8 | INTEGER | read-write | This object refers to the encapsulation type for the interface of this entry. For VLAN interfaces the encapsulation type can only be set to dix(2) or snap(3). For LIS interfaces the encapsulation type can only be set to none(1). |
| INT mpIpVpnIpAdEntForwarding | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.9 | INTEGER | read-write | This object indicates operation for data gram. to forwarding(1). When this interface is IP host, this object is set to not-forwarding(2). |
| INT mpIpVpnIpAdEntArpTimeOut | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.10 | INTEGER | read-write | Effective time of the Dynamic VPN IP ARP table (mpIpVpnIpNetToMediaTable). The value 0 means infinity. |
| INT mpIpVpnIpAdEntIcmpRedirectStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.11 | INTEGER | read-write | This object indicates whether an ICMP redirect message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachNetInStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.12 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(network unreachable in) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachNetOutStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.13 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(network unreachable out) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachHostInStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.14 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(host unreachable in) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachHostOutStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.15 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(host unreachable out) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachProtInStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.16 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(protocol unreachable in) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachProtOutStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.17 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(protocol unreachable out) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachPortInStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.18 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(port unreachable in) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachPortOutStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.19 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(port unreachable out) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachFragNeededInStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.20 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(fragmentation needed and DF set in) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachFragNeededOutStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.21 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(fragmentation needed and DF set out) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachRouteFailInStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.22 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(source route failed in)message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpUnreachRouteFailOutStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.23 | INTEGER | read-write | This object indicates whether an ICMP destination unreachable(source route failed out)message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpTtlExceedInStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.24 | INTEGER | read-write | This object indicates whether an ICMP time exceeded(time to live exceeded in transit in) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpTtlExceedOutStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.25 | INTEGER | read-write | This object indicates whether an ICMP time exceeded(time to live exceeded in transit out) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpReassemblyExceedInStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.26 | INTEGER | read-write | This object indicates whether an ICMP time exceeded(fragment reassembly time exceeded in) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpReassemblyExceedOutStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.27 | INTEGER | read-write | This object indicates whether an ICMP time exceeded(fragment reassembly time exceeded out) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpParamProbInStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.28 | INTEGER | read-write | This object indicates whether an ICMP parameter problem(in) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntIcmpParamProbOutStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.29 | INTEGER | read-write | This object indicates whether an ICMP parameter problem(out) message is transmitted to this Interface. |
| INT mpIpVpnIpAdEntProxyArpStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.30 | INTEGER | read-write | This object controls the operating status of the Proxy ARP in this Interface.This object is set to '1' to enable the Proxy ARP functionality, and is set to '2' to disable the Proxy ARP functionality. |
| INT mpIpVpnIpAdEntDirectedBroadcastStatus | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.31 | INTEGER | read-write | This object controls the operating status of the Directed Broadcast Forwarding in this Interface. This object is set to '1' to enable the Directed Broadcast Forwarding functionality, and is set to '2' to disable the Directed Broadcast Forwarding functionality. |
| INT mpIpVpnIpAdEntPathThroughListNumber | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.32 | INTEGER | read-write | This object controls the operating status of the Path Through Forwarding in this Interface. This object is set to 'except 0' to enable the Path Through Forwarding functionality, and is set to '0' to disable the Path Through Forwarding functionality.But, this number must be in relation to the direction-list. |
| INT mpIpVpnIpAdEntExtendedStaticRouteListNumber | 1.3.6.1.4.1.119.2.3.3.13.11.12.1.33 | INTEGER | read-write | This object controls the operating status of the Extended Static Routing in this Interface. This object is set to 'except 0' to enable the Extended Static Routing functionality, and is set to '0' to disable the Extended Static Routing functionality.But, this number must be in relation to the direction-list. |
| mpIpVpnIpCidrTable | 1.3.6.1.4.1.119.2.3.3.13.11.13 | not-accessible | The table of IP cidr information relevant to this entity's VPNID. | |
| mpIpVpnIpCidrEntry | 1.3.6.1.4.1.119.2.3.3.13.11.13.1 | not-accessible | The IP cidr information for one of this entity's VPNID. | |
| INT mpIpVpnIpCidrVpnId | 1.3.6.1.4.1.119.2.3.3.13.11.13.1.1 | INTEGER | read-only | This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535. |
| G32 mpIpVpnIpCidrRouteNumber | 1.3.6.1.4.1.119.2.3.3.13.11.13.1.2 | Gauge32 | read-only | The number of current mpIpVpnIpCidrRouteTable entries that are not invalid. |
| mpIpVpnIpCidrRouteTable | 1.3.6.1.4.1.119.2.3.3.13.11.14 | not-accessible | This entity's IP Routing table. | |
| mpIpVpnIpCidrRouteEntry | 1.3.6.1.4.1.119.2.3.3.13.11.14.1 | not-accessible | A particular route to a particular destina- tion, under a particular policy. | |
| INT mpIpVpnIpCidrRouteVpnId | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.1 | INTEGER | read-only | This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535. |
| IP mpIpVpnIpCidrRouteDest | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.2 | IpAddress | read-only | The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the mpIpVpnIpCidrRouteMask object is not equal to x. |
| IP mpIpVpnIpCidrRouteMask | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.3 | IpAddress | read-only | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the mpIpVpnIpCidrRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the mpIpVpnIpCidrRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the mpIpVpnIpCidrRouteDest object is not equal to mpIpVpnIpCidrRouteDest. |
| I32 mpIpVpnIpCidrRouteTos | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.4 | Integer32 | read-only | The policy specifier is the IP TOS Field. The encoding of IP TOS is as specified by the following convention. Zero indicates the default path if no more specific policy applies. +-----+-----+-----+-----+-----+-----+-----+-----+ | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | +-----+-----+-----+-----+-----+-----+-----+-----+ IP TOS IP TOS Field Policy Field Policy Contents Code Contents Code 0 0 0 0 ==> 0 0 0 0 1 ==> 2 0 0 1 0 ==> 4 0 0 1 1 ==> 6 0 1 0 0 ==> 8 0 1 0 1 ==> 10 0 1 1 0 ==> 12 0 1 1 1 ==> 14 1 0 0 0 ==> 16 1 0 0 1 ==> 18 1 0 1 0 ==> 20 1 0 1 1 ==> 22 1 1 0 0 ==> 24 1 1 0 1 ==> 26 1 1 1 0 ==> 28 1 1 1 1 ==> 30 |
| IP mpIpVpnIpCidrRouteNextHop | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.5 | IpAddress | read-only | On remote routes, the address of the next sys- tem en route; Otherwise, 0.0.0.0. |
| I32 mpIpVpnIpCidrRouteIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.6 | Integer32 | read-only | The ifIndex value which identifies the local interface through which the next hop of this route should be reached. |
| INT mpIpVpnIpCidrRouteType | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.7 | INTEGER | read-only | The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is not the final destina- tion. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. reject (2) refers to a route which, if matched, discards the message as unreachable. This is used in some protocols as a means of correctly aggregating routes. |
| INT mpIpVpnIpCidrRouteProto | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.8 | INTEGER | read-only | The routing mechanism via which this route was learned. Inclusion of values for gateway rout- ing protocols is not intended to imply that hosts should support those protocols. |
| I32 mpIpVpnIpCidrRouteAge | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.9 | Integer32 | read-only | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned. |
| OID mpIpVpnIpCidrRouteInfo | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.10 | OBJECT IDENTIFIER | read-only | A reference to MIB definitions specific to the particular routing protocol which is responsi- ble for this route, as determined by the value specified in the route's mpIpVpnIpCidrRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntactically valid object identif- ier, and any implementation conforming to ASN.1 and the Basic Encoding Rules must be able to generate and recognize this value. |
| I32 mpIpVpnIpCidrRouteNextHopAS | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.11 | Integer32 | read-only | The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. When this object is unknown or not relevant its value should be set to zero. |
| I32 mpIpVpnIpCidrRouteMetric1 | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.12 | Integer32 | read-only | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1. |
| I32 mpIpVpnIpCidrRouteMetric2 | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.13 | Integer32 | read-only | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1. |
| I32 mpIpVpnIpCidrRouteMetric3 | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.14 | Integer32 | read-only | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1. |
| I32 mpIpVpnIpCidrRouteMetric4 | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.15 | Integer32 | read-only | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1. |
| I32 mpIpVpnIpCidrRouteMetric5 | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.16 | Integer32 | read-only | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpCidrRouteProto value. If this metric is not used, its value should be set to -1. |
| ROW mpIpVpnIpCidrRouteStatus | 1.3.6.1.4.1.119.2.3.3.13.11.14.1.17 | RowStatus | read-only | The row status variable, used according to row installation and removal conventions. |
| mpIpVpnIpRouteTable | 1.3.6.1.4.1.119.2.3.3.13.11.15 | not-accessible | This entity's IP Routing table. | |
| mpIpVpnIpRouteEntry | 1.3.6.1.4.1.119.2.3.3.13.11.15.1 | not-accessible | A route to a particular destination. | |
| INT mpIpVpnIpRouteVpnId | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.1 | INTEGER | read-only | This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535. |
| IP mpIpVpnIpRouteDest | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.2 | IpAddress | read-write | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use. |
| INT mpIpVpnIpRouteIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.3 | INTEGER | read-write | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| INT mpIpVpnIpRouteMetric1 | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.4 | INTEGER | read-write | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1. |
| INT mpIpVpnIpRouteMetric2 | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.5 | INTEGER | read-write | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1. |
| INT mpIpVpnIpRouteMetric3 | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.6 | INTEGER | read-write | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1. |
| INT mpIpVpnIpRouteMetric4 | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.7 | INTEGER | read-write | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1. |
| IP mpIpVpnIpRouteNextHop | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.8 | IpAddress | read-write | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.) |
| INT mpIpVpnIpRouteType | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.9 | INTEGER | read-write | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the mpIpVpnIpRouteTable object. That is, it effectively dissasociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant mpIpVpnIpRouteType object. |
| INT mpIpVpnIpRouteProto | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.10 | INTEGER | read-only | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols. |
| INT mpIpVpnIpRouteAge | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.11 | INTEGER | read-write | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except through knowledge of the routing protocol by which the route was learned. |
| IP mpIpVpnIpRouteMask | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.12 | IpAddress | read-write | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the mpIpVpnIpRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the mpIpVpnIpRouteMask by determining whether the value of the correspondent mpIpVpnIpRouteDest field belong to a class-A, B, or C network, and then using one of: mask network 255.0.0.0 class-A 255.255.0.0 class-B 255.255.255.0 class-C If the value of the mpIpVpnIpRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism. |
| INT mpIpVpnIpRouteMetric5 | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.13 | INTEGER | read-write | An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's mpIpVpnIpRouteProto value. If this metric is not used, its value should be set to -1. |
| OID mpIpVpnIpRouteInfo | 1.3.6.1.4.1.119.2.3.3.13.11.15.1.14 | OBJECT IDENTIFIER | read-only | A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's mpIpVpnIpRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a syntatically valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value. |
| mpIpVpnIpNetToMediaTable | 1.3.6.1.4.1.119.2.3.3.13.11.16 | not-accessible | The IP Address Translation table used for mapping from IP addresses to physical addresses. | |
| mpIpVpnIpNetToMediaEntry | 1.3.6.1.4.1.119.2.3.3.13.11.16.1 | not-accessible | Each entry contains one IpAddress to `physical' address equivalence. | |
| INT mpIpVpnIpNetToMediaVpnId | 1.3.6.1.4.1.119.2.3.3.13.11.16.1.1 | INTEGER | read-only | This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535. |
| INT mpIpVpnIpNetToMediaIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.16.1.2 | INTEGER | read-write | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| PHY mpIpVpnIpNetToMediaPhysAddress | 1.3.6.1.4.1.119.2.3.3.13.11.16.1.3 | PhysAddress | read-write | The media-dependent `physical' address. |
| IP mpIpVpnIpNetToMediaNetAddress | 1.3.6.1.4.1.119.2.3.3.13.11.16.1.4 | IpAddress | read-write | The IpAddress corresponding to the media- dependent `physical' address. |
| INT mpIpVpnIpNetToMediaType | 1.3.6.1.4.1.119.2.3.3.13.11.16.1.5 | INTEGER | read-write | The type of mapping. Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the mpIpVpnIpNetToMediaTable. That is, it effectively dissasociates the interface identified with said entry from the mapping identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant mpIpVpnIpNetToMediaType object. |
| mpIpVpnStaticProxyArpTable | 1.3.6.1.4.1.119.2.3.3.13.11.17 | not-accessible | This entity's Static Proxy ARP table. | |
| mpIpVpnStaticProxyArpEntry | 1.3.6.1.4.1.119.2.3.3.13.11.17.1 | not-accessible | This entity's Static Proxy ARP table. | |
| INT mpIpVpnStaticProxyArpVpnId | 1.3.6.1.4.1.119.2.3.3.13.11.17.1.1 | INTEGER | read-only | This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535. |
| INT mpIpVpnStaticProxyArpIfIndex | 1.3.6.1.4.1.119.2.3.3.13.11.17.1.2 | INTEGER | read-write | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex. |
| IP mpIpVpnStaticProxyArpNetAddress | 1.3.6.1.4.1.119.2.3.3.13.11.17.1.3 | IpAddress | read-write | The IpAddress corresponding to the media- dependent `physical' address. |
| IP mpIpVpnStaticProxyArpNetMask | 1.3.6.1.4.1.119.2.3.3.13.11.17.1.4 | IpAddress | read-write | The IpAddress corresponding to the media- dependent `physical' address. |
| INT mpIpVpnStaticProxyArpStatus | 1.3.6.1.4.1.119.2.3.3.13.11.17.1.5 | INTEGER | read-write | When an entry is created it autmatically becomes valid(1). When this object is set to invalid(2) then this entry will be deleted. |
| mpIpVpnIcmpTable | 1.3.6.1.4.1.119.2.3.3.13.11.18 | not-accessible | The table of ICMP group information relevant to this entity's VPNID. | |
| mpIpVpnIcmpEntry | 1.3.6.1.4.1.119.2.3.3.13.11.18.1 | not-accessible | The ICMP group information for one of this entity's VPNID. | |
| INT mpIpVpnIcmpVpnId | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.1 | INTEGER | read-only | This is the index to identify the VPN entry. The value of this index must be assigned uniquely, witrhin the range of 1 - 65535. |
| CTR mpIpVpnIcmpInMsgs | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.2 | Counter | read-only | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by mpIpVpnIcmpInErrors. |
| CTR mpIpVpnIcmpInErrors | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.3 | Counter | read-only | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| CTR mpIpVpnIcmpInDestUnreachs | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.4 | Counter | read-only | The number of ICMP Destination Unreachable messages received. |
| CTR mpIpVpnIcmpInTimeExcds | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.5 | Counter | read-only | The number of ICMP Time Exceeded messages received. |
| CTR mpIpVpnIcmpInParmProbs | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.6 | Counter | read-only | The number of ICMP Parameter Problem messages received. |
| CTR mpIpVpnIcmpInSrcQuenchs | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.7 | Counter | read-only | The number of ICMP Source Quench messages received. |
| CTR mpIpVpnIcmpInRedirects | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.8 | Counter | read-only | The number of ICMP Redirect messages received. |
| CTR mpIpVpnIcmpInEchos | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.9 | Counter | read-only | The number of ICMP Echo (request) messages received. |
| CTR mpIpVpnIcmpInEchoReps | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.10 | Counter | read-only | The number of ICMP Echo Reply messages received. |
| CTR mpIpVpnIcmpInTimestamps | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.11 | Counter | read-only | The number of ICMP Timestamp (request) messages received. |
| CTR mpIpVpnIcmpInTimestampReps | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.12 | Counter | read-only | The number of ICMP Timestamp Reply messages received. |
| CTR mpIpVpnIcmpInAddrMasks | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.13 | Counter | read-only | The number of ICMP Address Mask Request messages received. |
| CTR mpIpVpnIcmpInAddrMaskReps | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.14 | Counter | read-only | The number of ICMP Address Mask Reply messages received. |
| CTR mpIpVpnIcmpOutMsgs | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.15 | Counter | read-only | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by mpIpVpnIcmpOutErrors. |
| CTR mpIpVpnIcmpOutErrors | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.16 | Counter | read-only | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of IP to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value. |
| CTR mpIpVpnIcmpOutDestUnreachs | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.17 | Counter | read-only | The number of ICMP Destination Unreachable messages sent. |
| CTR mpIpVpnIcmpOutTimeExcds | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.18 | Counter | read-only | The number of ICMP Time Exceeded messages sent. |
| CTR mpIpVpnIcmpOutParmProbs | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.19 | Counter | read-only | The number of ICMP Parameter Problem messages sent. |
| CTR mpIpVpnIcmpOutSrcQuenchs | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.20 | Counter | read-only | The number of ICMP Source Quench messages sent. |
| CTR mpIpVpnIcmpOutRedirects | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.21 | Counter | read-only | The number of ICMP Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| CTR mpIpVpnIcmpOutEchos | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.22 | Counter | read-only | The number of ICMP Echo (request) messages sent. |
| CTR mpIpVpnIcmpOutEchoReps | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.23 | Counter | read-only | The number of ICMP Echo Reply messages sent. |
| CTR mpIpVpnIcmpOutTimestamps | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.24 | Counter | read-only | The number of ICMP Timestamp (request) messages sent. |
| CTR mpIpVpnIcmpOutTimestampReps | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.25 | Counter | read-only | The number of ICMP Timestamp Reply messages sent. |
| CTR mpIpVpnIcmpOutAddrMasks | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.26 | Counter | read-only | The number of ICMP Address Mask Request messages sent. |
| CTR mpIpVpnIcmpOutAddrMaskReps | 1.3.6.1.4.1.119.2.3.3.13.11.18.1.27 | Counter | read-only | The number of ICMP Address Mask Reply messages sent. |
| mpIpVpnPingTable | 1.3.6.1.4.1.119.2.3.3.13.11.19 | not-accessible | The table of ping management information relevant to this entity's ICMP echo identifier. | |
| mpIpVpnPingEntry | 1.3.6.1.4.1.119.2.3.3.13.11.19.1 | not-accessible | The ping management information for one of this entity's ICMP echo identifier. | |
| INT mpIpVpnPingId | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.1 | INTEGER | read-only | This is the index to identify the ping entry. The value of this index must be assigned uniquely, within the range of 1 - 65535. |
| INT mpIpVpnPingVpnId | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.2 | INTEGER | read-write | The value of this object is the VPNID for this entry, within the range of 1 - 65535. |
| IP mpIpVpnPingTarget | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.3 | IpAddress | read-write | The value of this object is the destination IP address for this entry. This IP address must always be a unicast IP address and it should never be a Class D or E IP address. |
| INT mpIpVpnPingRequestSend | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.4 | INTEGER | read-only | The value of this object is the ping request number of the times. |
| INT mpIpVpnPingDataLength | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.5 | INTEGER | read-write | The value of this object is the ping data length, within the range of 0 - 65507. |
| INT mpIpVpnPingSendTos | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.6 | INTEGER | read-write | The value of this object is the TOS value in ping packet, within the range of 0 - 0xfe. |
| INT mpIpVpnPingSendTtl | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.7 | INTEGER | read-write | The value of this object is the TTL value in ping packet, within the range of 1 - 255. |
| INT mpIpVpnPingSendTimeOut | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.8 | INTEGER | read-write | The value of this object is the ping time out value, within the range of 1 - 60 seconds. |
| INT mpIpVpnPingSendInterface | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.9 | INTEGER | read-write | The value of this object is ifIndex. IP address assigned ifIndex is set as source IP address in ping packets. |
| INT mpIpVpnPingStatus | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.10 | INTEGER | read-write | This object refers to the ping entry status. When this object is set to create(1), ping entry is created. Set to inProgress(2), ping is Started. When a reply or icmp error receiveed and time out occured, the status become complete(3). This object can not set to complete(3). Set to destroy(4), entry is deleted. |
| INT mpIpVpnPingResult | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.11 | INTEGER | read-only | This object refers to the ping result status. |
| IP mpIpVpnPingErrorSourceAddress | 1.3.6.1.4.1.119.2.3.3.13.11.19.1.12 | IpAddress | read-only | This value of this object is the error source IP address in icmp error reply message. |
| mpRip | 1.3.6.1.4.1.119.2.3.3.13.12 | |||
| mpRip2IfConfTable | 1.3.6.1.4.1.119.2.3.3.13.12.1 | not-accessible | This is the table type object of the RIP sending operation mode. | |
| mpRip2IfConfEntry | 1.3.6.1.4.1.119.2.3.3.13.12.1.1 | not-accessible | This is the table entry of mpRip2IfconfTable. | |
| IP mpRip2IfConfAddress | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.1 | IpAddress | read-only | This object specifies the IP address of the interface to which the RIP packet is sent. |
| INT mpRip2IfConfPoisoned | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.2 | INTEGER | read-write | This object specifies the RIP sending mode of this interface. In case of Sprit Horizon with Poisoned Reverse, the value '1' is set to this object. In case of Sprit Horizon, the value '2' is set to this object. |
| INT mpRip2IfConfSplitHorizon | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.3 | INTEGER | read-write | The flag about Split-Horizon of this interface. |
| INT mpRip2IfConfHostAdvertise | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.4 | INTEGER | read-write | The flag which shows whether IP address of interface that condition is Down is transmitted as Host Route to this Interface. |
| INT mpRip2IfConfInOffset | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.5 | INTEGER | read-write | This object specifies the metric value to be added to the route information of RIP-response which is received from this interface. |
| INT mpRip2IfConfOutOffset | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.6 | INTEGER | read-write | This object specifies the metric value to be added to the route information of RIP-response which is sent to this interface. |
| INT mpRip2IfConfDefType | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.7 | INTEGER | read-write | The timing when default route is advertised to this interface. |
| INT mpRip2IfConfDefMetric | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.8 | INTEGER | read-write | The metric value of default route to be used when the advertised timing(mpRip2IfConfDefType) is set to 'always'. |
| IP mpRip2IfConfDefAddress | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.9 | IpAddress | read-write | The next-hop IP addess of default route to be used when the advertised timing (mpRip2IfConfDefType) is set to 'always'. |
| INT mpRip2IfConfDefTag | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.10 | INTEGER | read-write | The route tag of default route to be used when the advertised timing(mpRip2IfConfDefType) is set to 'always'. |
| INT mpRip2IfConfDefProtocol | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.11 | INTEGER | read-write | The protocol of routing table to be used for condition decision when the advertised timing (mpRip2IfConfDefType) is set to 'importList'. |
| INT mpRip2IfConfDefImportList | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.12 | INTEGER | read-write | The route tag of default route to be used when the advertised timing(mpRip2IfConfDefType) is set to 'always'. |
| INT mpRip2IfConfRoutePriority | 1.3.6.1.4.1.119.2.3.3.13.12.1.1.13 | INTEGER | read-write | The route priority value which is used when the route information of RIP-response received from this interface is reflected. The value 0 means route priority is not used for each interface. |
| mpRip2PeerTable | 1.3.6.1.4.1.119.2.3.3.13.12.2 | not-accessible | The Neighbor information table to transmit RIP-response with unicast. | |
| mpRip2PeerEntry | 1.3.6.1.4.1.119.2.3.3.13.12.2.1 | not-accessible | The Neighbor information Entry to transmit RIP-response with unicast. | |
| IP mpRip2PeerAddress | 1.3.6.1.4.1.119.2.3.3.13.12.2.1.1 | IpAddress | read-only | This object specifies IP Address of Neighbor which transmits RIP-response with unicast. |
| INT mpRip2PeerVersion | 1.3.6.1.4.1.119.2.3.3.13.12.2.1.2 | INTEGER | read-write | This object specifies version of RIP-response. |
| ROW mpRip2PeerStatus | 1.3.6.1.4.1.119.2.3.3.13.12.2.1.3 | RowStatus | read-write | This object is used to create, delete, or modify this table entry. |
| mpRip2ImportListTable | 1.3.6.1.4.1.119.2.3.3.13.12.3 | not-accessible | The table for importing route information to other routing protocols or RIP. | |
| mpRip2ImportListEntry | 1.3.6.1.4.1.119.2.3.3.13.12.3.1 | not-accessible | The table for importing route information to other routing protocols or RIP. | |
| INT mpRip2ImportListProtocol | 1.3.6.1.4.1.119.2.3.3.13.12.3.1.1 | INTEGER | read-only | This object specifies protocol of IP routing table. |
| INT mpRip2ImportListNumber | 1.3.6.1.4.1.119.2.3.3.13.12.3.1.2 | INTEGER | read-only | This object specifies import list number. |
| ROW mpRip2ImportListStatus | 1.3.6.1.4.1.119.2.3.3.13.12.3.1.3 | RowStatus | read-write | This object is used to create, delete, or modify this table entry. |
| mpRip2NetworkPriorityTable | 1.3.6.1.4.1.119.2.3.3.13.12.4 | not-accessible | The table to specify route priority to each network at creating IP routing table. | |
| mpRip2NetworkPriorityEntry | 1.3.6.1.4.1.119.2.3.3.13.12.4.1 | not-accessible | The entry to specify route priority to each network at creating IP routing table. | |
| IP mpRip2NetworkPriorityAddr | 1.3.6.1.4.1.119.2.3.3.13.12.4.1.1 | IpAddress | read-only | This object specifies network IP address. |
| IP mpRip2NetworkPriorityMask | 1.3.6.1.4.1.119.2.3.3.13.12.4.1.2 | IpAddress | read-only | This object specifies network mask. |
| INT mpRip2NetworkPriorityValue | 1.3.6.1.4.1.119.2.3.3.13.12.4.1.3 | INTEGER | read-write | This object specifies the value of route priority. |
| ROW mpRip2NetworkPriorityStatus | 1.3.6.1.4.1.119.2.3.3.13.12.4.1.4 | RowStatus | read-write | This object is used to create, delete, or modify this table entry. |
| INT mpRip2RoutePriority | 1.3.6.1.4.1.119.2.3.3.13.12.5 | INTEGER | read-write | The route priority value to be used when the route information of RIP-response received is reflected. It is used when the route priority of interface has not been registered (mpRip2IfConfRoutePriority is 0) and route information doesn't correspond to any network route priority table(mpRip2NetworkPriorityTable). |
| mpSnmp | 1.3.6.1.4.1.119.2.3.3.13.13 | |||
| mpSnmpCommunityTable | 1.3.6.1.4.1.119.2.3.3.13.13.1 | not-accessible | The community table (1-5 entries). This table lists community strings and their access levels. When a Snmp message is received by this entity, the community string in the message is compared with this table to determine access rights of sender. | |
| mpSnmpCommunityEntry | 1.3.6.1.4.1.119.2.3.3.13.13.1.1 | not-accessible | A community table entry. | |
| INT mpSnmpCommunityIndex | 1.3.6.1.4.1.119.2.3.3.13.13.1.1.1 | INTEGER | not-accessible | This object specifies the addition/deletion of a particular trap community. |
| INT mpSnmpCommunityStatus | 1.3.6.1.4.1.119.2.3.3.13.13.1.1.2 | INTEGER | not-accessible | This object specifies the addition/deletion of a particular community. Entries 1 and 2 are reserved for public access( read-only ) and NEC's NMS read -write. |
| INT mpSnmpCommunityAccess | 1.3.6.1.4.1.119.2.3.3.13.13.1.1.3 | INTEGER | not-accessible | A value of readWrite(2) allows the community to read and write all objects in the MIB. A value of readOnly(1) allows the community to read all objs. |
| IP mpSnmpCommunityAddr | 1.3.6.1.4.1.119.2.3.3.13.13.1.1.4 | IpAddress | not-accessible | IP address of the registered NMS. This is actually a lists of IP addresses, maximum of 5. A special indexing must be implemented to get all the list of IP addresses for each entry. |
| STR mpSnmpCommunityName | 1.3.6.1.4.1.119.2.3.3.13.13.1.1.5 | DisplayString | not-accessible | Configurable community string with access rights defined by the value of sysCommunityAccess. |
| mpSnmpTrapCommunityTable | 1.3.6.1.4.1.119.2.3.3.13.13.2 | not-accessible | The trap receiver table (0 to 5 entries). This table lists the addresses of stations that should receive trap messages from this entity when an exception condition occurs. | |
| mpSnmpTrapCommunityEntry | 1.3.6.1.4.1.119.2.3.3.13.13.2.1 | not-accessible | A trap receiver table entry. | |
| INT mpSnmpTrapCommunityIndex | 1.3.6.1.4.1.119.2.3.3.13.13.2.1.1 | INTEGER | not-accessible | This object specifies the row for a particular trap community. |
| INT mpSnmpTrapCommunityStatus | 1.3.6.1.4.1.119.2.3.3.13.13.2.1.2 | INTEGER | not-accessible | This object specifies the addition/deletion of a particular trap community. |
| INT mpSnmpTrapCommunityType | 1.3.6.1.4.1.119.2.3.3.13.13.2.1.3 | INTEGER | not-accessible | This object specifies the recipient of a generated trap. AS of the moment only a NMS station is supported. |
| IP mpSnmpTrapCommunityAddr | 1.3.6.1.4.1.119.2.3.3.13.13.2.1.4 | IpAddress | not-accessible | For type NMS,IP address for trap receiver. (For now type NMS is yet supported). For telephone,fax, and pager, phone number. For email, this is an Internet email address. |
| STR mpSnmpTrapCommunityName | 1.3.6.1.4.1.119.2.3.3.13.13.2.1.5 | DisplayString | not-accessible | Community string used for trap messages to this trap receiver. |
| mpSnmpLockMib | 1.3.6.1.4.1.119.2.3.3.13.13.3 | |||
| IP mpSnmpLockMibIPaddress | 1.3.6.1.4.1.119.2.3.3.13.13.3.1 | IpAddress | read-write | if IPaddress is 0.0.0.0, NMS doesn't SET LockMIB. if not, only 1 NMS is successing to SET LockMIB. note : NMS must SET own IPaddress to LockMIB before NMS tries to SET some specific MIB |
| mpStats | 1.3.6.1.4.1.119.2.3.3.13.14 | |||
| mpMonitorGroupTable | 1.3.6.1.4.1.119.2.3.3.13.14.1 | not-accessible | Monitoring Group related details. | |
| mpMonitorGroupEntry | 1.3.6.1.4.1.119.2.3.3.13.14.1.1 | not-accessible | Details for a group of monitored statistics. | |
| INT mpMonGrpIndex | 1.3.6.1.4.1.119.2.3.3.13.14.1.1.1 | INTEGER | not-accessible | Specifies the table entry. |
| OID mpMonGrpObjectId | 1.3.6.1.4.1.119.2.3.3.13.14.1.1.2 | OBJECT IDENTIFIER | not-accessible | Name of the port/module to which the info in the table entry applies to. |
| INT mpMonGrpObjectInstance | 1.3.6.1.4.1.119.2.3.3.13.14.1.1.3 | INTEGER | not-accessible | Instance to which the info in the table entry applies to. |
| INT mpMonGrpPollInt | 1.3.6.1.4.1.119.2.3.3.13.14.1.1.4 | INTEGER | not-accessible | Interval at which the polling for values is done. |
| INT mpMonGrpStatus | 1.3.6.1.4.1.119.2.3.3.13.14.1.1.5 | INTEGER | not-accessible | Setting this field to disable deletes the entry from the list of monitored groups. |
| STR mpMonGrpName | 1.3.6.1.4.1.119.2.3.3.13.14.1.1.6 | DisplayString | not-accessible | The text value of the monitor group. For release 1, read-only but release 2 will allow the user to set the monitor group name to any textual description. |
| mpStatObjectTable | 1.3.6.1.4.1.119.2.3.3.13.14.2 | not-accessible | Object related statistics details. | |
| mpStatObjectEntry | 1.3.6.1.4.1.119.2.3.3.13.14.2.1 | not-accessible | Details of statistics. | |
| INT mpStatObjectIndex | 1.3.6.1.4.1.119.2.3.3.13.14.2.1.1 | INTEGER | not-accessible | Specifies the table entry. |
| INT mpStatObjectGroupId | 1.3.6.1.4.1.119.2.3.3.13.14.2.1.2 | INTEGER | not-accessible | Monitoring Group that this obj belongs to. |
| OID mpStatObjectId | 1.3.6.1.4.1.119.2.3.3.13.14.2.1.3 | OBJECT IDENTIFIER | not-accessible | OID of the object. |
| STR mpStatObjectName | 1.3.6.1.4.1.119.2.3.3.13.14.2.1.4 | DisplayString | not-accessible | Textual equivalent of the object. |
| INT mpStatObjectCurValue | 1.3.6.1.4.1.119.2.3.3.13.14.2.1.5 | INTEGER | not-accessible | Current value of the object. |
| INT mpStatObjectCumRate | 1.3.6.1.4.1.119.2.3.3.13.14.2.1.6 | INTEGER | not-accessible | Cumulative rate of the object. |
| INT mpStatObjectIntRate | 1.3.6.1.4.1.119.2.3.3.13.14.2.1.7 | INTEGER | not-accessible | Rate of change of the objetc's statistics. |
| mpCli | 1.3.6.1.4.1.119.2.3.3.13.15 | |||
| mpCliOperatorTable | 1.3.6.1.4.1.119.2.3.3.13.15.1 | not-accessible | Indicates the table of operator mode user for CLI | |
| mpCliOperatorEntry | 1.3.6.1.4.1.119.2.3.3.13.15.1.1 | not-accessible | Indicates the entry of operator mode user information. | |
| INT mpCliOperatorIndex | 1.3.6.1.4.1.119.2.3.3.13.15.1.1.1 | INTEGER | read-only | This is the index to identify the existing operator mode user. |
| STR mpCliOperatorName | 1.3.6.1.4.1.119.2.3.3.13.15.1.1.2 | DisplayString | read-write | This object is the operator user name. |
| STR mpCliOperatorPasswd | 1.3.6.1.4.1.119.2.3.3.13.15.1.1.3 | DisplayString | read-write | This object is the operator user password which is used for user login. |
| STR mpCliOperatorLoginPasswd | 1.3.6.1.4.1.119.2.3.3.13.15.1.1.4 | DisplayString | read-write | This objects is the operator user password entered by user at login. |
| INT mpCliOperatorStatus | 1.3.6.1.4.1.119.2.3.3.13.15.1.1.5 | INTEGER | read-write | This object specifies the addition/deletion of a operator. |
| mpCliSupervisorTable | 1.3.6.1.4.1.119.2.3.3.13.15.2 | not-accessible | Indicates the table of supervisor mode user for CLI | |
| mpCliSupervisorEntry | 1.3.6.1.4.1.119.2.3.3.13.15.2.1 | not-accessible | Indicates the entry of supervisor mode user information. | |
| INT mpCliSupervisorIndex | 1.3.6.1.4.1.119.2.3.3.13.15.2.1.1 | INTEGER | read-only | This is the index to identify the existing supervisor mode user |
| STR mpCliSupervisorName | 1.3.6.1.4.1.119.2.3.3.13.15.2.1.2 | DisplayString | read-write | This object is the supervisor user name. |
| STR mpCliSupervisorPasswd | 1.3.6.1.4.1.119.2.3.3.13.15.2.1.3 | DisplayString | read-write | This object is the supervisor user password which is used for user login. |
| STR mpCliSupervisorLoginPasswd | 1.3.6.1.4.1.119.2.3.3.13.15.2.1.4 | DisplayString | read-write | This objects is the supervisor user password entered by user at login. |
| INT mpCliSupervisorStatus | 1.3.6.1.4.1.119.2.3.3.13.15.2.1.5 | INTEGER | read-write | This object specifies the addition/deletion of a supervisor. |
| mpAtm | 1.3.6.1.4.1.119.2.3.3.13.16 | |||
| mpAtmInterfaceConfTable | 1.3.6.1.4.1.119.2.3.3.13.16.1 | not-accessible | This table contains ATM local interface configuration parameters, one entry per ATM interface port. | |
| mpAtmInterfaceConfEntry | 1.3.6.1.4.1.119.2.3.3.13.16.1.1 | not-accessible | This list contains ATM interface configuration parameters and state variables. | |
| INT mpAtmInterfaceIfIndex | 1.3.6.1.4.1.119.2.3.3.13.16.1.1.1 | INTEGER | read-only | Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex. |
| OCT mpAtmInterfaceAdminPrefix | 1.3.6.1.4.1.119.2.3.3.13.16.1.1.2 | OCTET STRING | read-write | An prefix assigned for administrative purpose. This value is displayed as the instance of atmInterfaceAdminAddress object of ATM MIB. |
| OCT mpAtmInterfaceAdminEsi | 1.3.6.1.4.1.119.2.3.3.13.16.1.1.3 | OCTET STRING | read-write | An ESI assigned for administrative purpose. This value is displayed as the instance of atmInterfaceAdminAddress object of ATM MIB. |
| INT mpAtmInterfaceMaxVpiVciBits | 1.3.6.1.4.1.119.2.3.3.13.16.1.1.4 | INTEGER | read-only | This object sets the maximum number of the sum of VPI/VCI bit number that are able to use at this interface. |
| mpAtmVccConfigTable | 1.3.6.1.4.1.119.2.3.3.13.16.2 | not-accessible | This table contains VCC configuration parameters, one entry per ATM interface port. | |
| mpAtmVccConfigEntry | 1.3.6.1.4.1.119.2.3.3.13.16.2.1 | not-accessible | This list contains VCC configuration parameters and state variables. | |
| INT mpAtmVccIfIndex | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.1 | INTEGER | read-only | Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex. |
| INT mpAtmVccFrameFormat | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.2 | INTEGER | read-write | The type of frame format for use at this ATM interface. |
| INT mpAtmVccF4OamSupport | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.3 | INTEGER | read-write | Indicates whether the F4 OAM functionality is supported or not, for the ATM interface of this equipment. This object can be modified only when all the ATM interfaces are blocked. If it is set to '1', the F5 OAM functionality is supported. If it is set to '2', it is not supported. |
| INT mpAtmVccF5OamSupport | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.4 | INTEGER | read-write | Indicates whether the F5 OAM functionality is supported or not, for the ATM interface of this equipment. This object can be modified only when all the ATM interfaces are blocked. If it is set to '1', the F5 OAM functionality is supported. If it is set to '2', it is not supported. |
| INT mpAtmVccFailTimerLof | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.5 | INTEGER | read-write | It is used to set the timer value of the LOF (Loss of Frames) failure detection timer (msec). It is possible to set the integer of a multiple of 100. |
| INT mpAtmVccFailTimerLos | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.6 | INTEGER | read-write | It is used to set the timer value of the LOS (Loss of Signal) failure detection timer (msec). It is possible to set the integer of a multiple of 100. |
| INT mpAtmVccRecoverTimerLof | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.7 | INTEGER | read-write | It is used to set the timer value of the LOF (Loss of Frames) recovery detection timer (msec). It is possible to set the integer of a multiple of 100. |
| INT mpAtmVccRecoverTimerLos | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.8 | INTEGER | read-write | It is used to set the timer value of the LOS (Loss of Signal) recovery detection timer (msec). It is possible to set the integer of a multiple of 100. |
| INT mpAtmVccFailTimerLop | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.9 | INTEGER | read-write | It is used to set the timer value of the LOP (Loss of Pointer) failure detection timer (msec). It is possible to set the integer of a multiple of 100. |
| INT mpAtmVccRecoverTimerLop | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.10 | INTEGER | read-write | It is used to set the timer value of the LOP (Loss of Pointer) recovery detection timer (msec). It is possible to set the integer of a multiple of 100. |
| INT mpAtmVccCdv | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.11 | INTEGER | read-write | It is used to set the value of CDV(Cell Delay Variation) which is used for ATM Mega-Link. |
| INT mpAtmVccClockMode | 1.3.6.1.4.1.119.2.3.3.13.16.2.1.12 | INTEGER | read-write | It is used to set clock mode of ATM. If it is set to '1', the clock received from the line is used. If it is set to '2', the internal clock is used. |
| mpAtmSscopConfigTable | 1.3.6.1.4.1.119.2.3.3.13.16.3 | not-accessible | Indicates the table of SSCOP layer parameter configuration. | |
| mpAtmSscopConfigEntry | 1.3.6.1.4.1.119.2.3.3.13.16.3.1 | not-accessible | Indicates the entry of SSCOP layer configuration. | |
| INT mpAtmSscopIfIndex | 1.3.6.1.4.1.119.2.3.3.13.16.3.1.1 | INTEGER | read-only | Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex. |
| INT mpAtmSscopTimerConnectControl | 1.3.6.1.4.1.119.2.3.3.13.16.3.1.2 | INTEGER | read-write | It is used to set the timer value of the SSCOP connection control PDU re-sending interval timer (msec). The timer value must be the same as the that of the equipment connected to itself. It is possible to set the integer of a multiple of 250. |
| INT mpAtmSscopTimerKeepalive | 1.3.6.1.4.1.119.2.3.3.13.16.3.1.3 | INTEGER | read-write | It is used to set the timer value of the POLL PDU re-sending interval timer, which is used when there is no SD PDU to be sent, in the data transmission phase (msec). The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250. |
| INT mpAtmSscopTimerNoResponse | 1.3.6.1.4.1.119.2.3.3.13.16.3.1.4 | INTEGER | read-write | It is used to set the timer value of the STAT PDU waiting timer (msec). This is the connection observation timer in the data transmission phase. When it expires, the connection is disconnected. The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250. |
| INT mpAtmSscopTimerPoll | 1.3.6.1.4.1.119.2.3.3.13.16.3.1.5 | INTEGER | read-write | It is used to set the timer value of the POLL PDU sending interval timer in the data transmission phase (msec). The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250. |
| INT mpAtmSscopTimerIdle | 1.3.6.1.4.1.119.2.3.3.13.16.3.1.6 | INTEGER | read-write | It is used to set the timer value of the POLL PDU sending interval timer, which is used when there is no SD PDU to be sent, in the data transmission phase (msec). The timer value must be the same as that of the equipment connected to itself. It is possible to set the integer of a multiple of 250. |
| INT mpAtmSscopMaxConnectControl | 1.3.6.1.4.1.119.2.3.3.13.16.3.1.7 | INTEGER | read-write | Indicates the MAX retry count value of the SSCOP connection control PDU sending. |
| INT mpAtmSscopMaxPd | 1.3.6.1.4.1.119.2.3.3.13.16.3.1.8 | INTEGER | read-write | Indicates the sending timing of the POLL PDU. After the PDUs as many as the number specified by this object are sent, one POLL PDU is sent. |
| mpAtmSignalingConfigTable | 1.3.6.1.4.1.119.2.3.3.13.16.4 | not-accessible | This table contains ATM Signaling configuration parameters, one entry per ATM interface port. | |
| mpAtmSignalingConfigEntry | 1.3.6.1.4.1.119.2.3.3.13.16.4.1 | not-accessible | This list contains ATM signaling configuration parameters and state variables. | |
| INT mpAtmSigIfIndex | 1.3.6.1.4.1.119.2.3.3.13.16.4.1.1 | INTEGER | read-only | Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex. |
| INT mpAtmSigSvcSupportFlag | 1.3.6.1.4.1.119.2.3.3.13.16.4.1.2 | INTEGER | read-write | Indicates whether the SVC functionality is supported or not, for the ATM interface of this equipment. If it is set to '1', SVC functionality is supported. If it is set to '2', it is not supported. |
| INT mpAtmSigUniVersion | 1.3.6.1.4.1.119.2.3.3.13.16.4.1.3 | INTEGER | read-write | This specifies the ATM Forum UNI version which is used by the ATM ports of this equipment as the ATM Signaling functionality. This object can be set only when all the ATM ports are closed. It is set to '1' in the case of UNI3.0, and is set to '2' in the case of UNI3.1. |
| mpAtmIlmiConfigTable | 1.3.6.1.4.1.119.2.3.3.13.16.5 | not-accessible | This table contains ILMI configuration parameters, one entry per ATM interface port. | |
| mpAtmIlmiConfigEntry | 1.3.6.1.4.1.119.2.3.3.13.16.5.1 | not-accessible | This list contains ILMI configuration parameters and state variables. | |
| INT mpAtmIlmiIfIndex | 1.3.6.1.4.1.119.2.3.3.13.16.5.1.1 | INTEGER | read-only | Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex. |
| INT mpAtmIlmiFlag | 1.3.6.1.4.1.119.2.3.3.13.16.5.1.2 | INTEGER | read-write | This object indicates ILMI Function support status. |
| mpAtmStatisticsTable | 1.3.6.1.4.1.119.2.3.3.13.16.6 | not-accessible | Indicates the table of the statistics data of the SONET or SDH base ATM interface. | |
| mpAtmStatisticsEntry | 1.3.6.1.4.1.119.2.3.3.13.16.6.1 | not-accessible | Indicates the entry of the statistics data of each ATM interface. | |
| INT mpAtmStatIfIndex | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.1 | INTEGER | read-only | Indicates the index value to identify the ATM interface uniquely within the equipment. Each ATM interface identified by this object is the same ATM interface identified by the ifIndex. |
| CTR mpAtmStatVpiVciErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.2 | Counter | read-only | Indicates the counter value of the VPI/VCI error. |
| CTR mpAtmStatRcvOverRunErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.3 | Counter | read-only | Indicates the counter value of the receiving FIFO over-run error. |
| CTR mpAtmStatInvalidCellErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.4 | Counter | read-only | Indicates the counter value of the received invalid cell. |
| CTR mpAtmStatRcvBufEmptys | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.5 | Counter | read-only | Indicates the counter value of the received free buffer empty. |
| CTR mpAtmStatRcvStsAlmostFulls | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.6 | Counter | read-only | Indicates the counter value of the Rx Status Queue Almost Full. |
| CTR mpAtmStatSndStsAlmostFulls | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.7 | Counter | read-only | Indicates the counter value of the Tx Status Queue Almost Full. |
| CTR mpAtmStatOolErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.8 | Counter | read-only | Indicates OOL(Out of Lock) error counter value. |
| CTR mpAtmStatLocErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.9 | Counter | read-only | Indicates LOC(Loss Of Cell Delineation) error counter value. |
| CTR mpAtmStatHecErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.10 | Counter | read-only | Indicates the ATM cell HEC error counter value. |
| CTR mpAtmStatOcdErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.11 | Counter | read-only | Indicates OCD(Out Of Cell Delineation) error counter value. |
| CTR mpAtmStatTcOverFlowErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.12 | Counter | read-only | Indicates the counter value of the FIFO overflow. |
| CTR mpAtmStatParityErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.13 | Counter | read-only | Indicates the counter value of the parity error. |
| CTR mpAtmStatC2Errs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.14 | Counter | read-only | Indicates the C2 error counter value. |
| CTR mpAtmStatLopErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.15 | Counter | read-only | Indicates the LOP(Loss of Pointer) error counter value. |
| CTR mpAtmStatPaisErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.16 | Counter | read-only | Indicates the Path Alarm Indication error counter value. |
| CTR mpAtmStatPrdiErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.17 | Counter | read-only | Indicates the Path Remote Path Indication error counter value. |
| CTR mpAtmStatB3Errs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.18 | Counter | read-only | Indicates the B3 error counter value. |
| CTR mpAtmStatPathFebeErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.19 | Counter | read-only | Indicates the Path FEBE error counter value. |
| CTR mpAtmStatB2Errs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.20 | Counter | read-only | Indicates the B2 error counter value. |
| CTR mpAtmStatLineFebeErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.21 | Counter | read-only | Indicates the Line FEBE error counter value. |
| CTR mpAtmStatLaisErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.22 | Counter | read-only | Indicates the Line Alarm Indication error counter value. |
| CTR mpAtmStatLrdiErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.23 | Counter | read-only | Indicates the Line Remote Path indication error counter value. |
| CTR mpAtmStatOofErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.24 | Counter | read-only | Indicates the OOF(Out of Frame) error counter value. |
| CTR mpAtmStatB1Errs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.25 | Counter | read-only | Indicates the B1 error counter value. |
| CTR mpAtmStatLosErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.26 | Counter | read-only | Indicates the LOS(Loss of Signal) error counter value. |
| CTR mpAtmStatLofErrs | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.27 | Counter | read-only | Inicates the LOF(Loss of Frame) error counter value. |
| CTR mpAtmStatInPackets | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.28 | Counter | read-only | Indicates the counter value of the incoming packets. |
| CTR mpAtmStatInOctets | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.29 | Counter | read-only | Indicates the counter value of the incoming octets. |
| CTR mpAtmStatOutPackets | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.30 | Counter | read-only | Indicates the counter value of the outgoing packets. |
| CTR mpAtmStatOutOctets | 1.3.6.1.4.1.119.2.3.3.13.16.6.1.31 | Counter | read-only | Indicates the counter value of the outgoing octets. |
| mpAtmNetPrefixTable | 1.3.6.1.4.1.119.2.3.3.13.16.7 | not-accessible | This table contains network prefix of ATM address got by ILMI. | |
| mpAtmNetPrefixEntry | 1.3.6.1.4.1.119.2.3.3.13.16.7.1 | not-accessible | This list contains network prefix of ATM address got by ILMI. | |
| INT mpAtmNetPrefixPort | 1.3.6.1.4.1.119.2.3.3.13.16.7.1.1 | INTEGER | read-only | A unique value which identifies the ATM Port. |
| NET mpAtmNetPrefixPrefix | 1.3.6.1.4.1.119.2.3.3.13.16.7.1.2 | NetPrefix | read-only | The network Prefix for ATM address. |
| INT mpAtmNetPrefixStatus | 1.3.6.1.4.1.119.2.3.3.13.16.7.1.3 | INTEGER | read-only | Indicates the validity of the network prefix. |
| mpAtmVpcTable | 1.3.6.1.4.1.119.2.3.3.13.16.8 | not-accessible | This table contains VPL configuration parameters, one entry per ATM interface port. | |
| mpAtmVpcEntry | 1.3.6.1.4.1.119.2.3.3.13.16.8.1 | not-accessible | This list contains VPL configuration parameters and state variables. | |
| INT mpAtmVpcIfIndex | 1.3.6.1.4.1.119.2.3.3.13.16.8.1.1 | INTEGER | read-only | Indicates the index value to identify the ATM interface in this equipment. Each ATM interface identified by this object is the same interface identified by the same number of ifIndex. |
| INT mpAtmVpcVpi | 1.3.6.1.4.1.119.2.3.3.13.16.8.1.2 | INTEGER | read-only | The VPI value of the VPL. Note that the VPI=0 is not used for a VPL not associated with a VCL. The maximum VPI value cannot exceed the value allowable by the atmInterfaceMaxVpiBits. |
| INT mpAtmVpcAdminStatus | 1.3.6.1.4.1.119.2.3.3.13.16.8.1.3 | INTEGER | read-write | This object is implemented only for a VPL which terminates a VPC (i.e., one which is NOT cross-connected to other VPLs). Its value specifies the desired administrative state of the VPL. The up and down states indicate that the traffic flow is enabled and disabled respectively for this VPL. |
| INT mpAtmVpcOperStatus | 1.3.6.1.4.1.119.2.3.3.13.16.8.1.4 | INTEGER | read-only | This object indicates the current operational status of the VPL. The up and down states indicate that the VPL is currently operational, or not operational, respectively. The unknown state indicates that the status of this VPL cannot be determined. |
| TIM mpAtmVpcLastChange | 1.3.6.1.4.1.119.2.3.3.13.16.8.1.5 | TimeStamp | read-only | The value of MIB II's sysUpTime object at the time this VPL entered its current operational state. If the current state was entered prior to the last re-initialization of the agent, then this object contains a zero value. |
| INT mpAtmVpcShapingType | 1.3.6.1.4.1.119.2.3.3.13.16.8.1.6 | INTEGER | read-write | This object indicates shaping type used for VPC status. |
| INT mpAtmVpcTransmitTrafficDescrIndex | 1.3.6.1.4.1.119.2.3.3.13.16.8.1.7 | INTEGER | read-write | The value of this object identifies the row of the ATM Traffic Descriptor Table which applies to the transmit direction of this VCL. |
| ROW mpAtmVpcRowStatus | 1.3.6.1.4.1.119.2.3.3.13.16.8.1.8 | RowStatus | read-write | This object is used to create, delete or modify a row in this table. To create a new VCL, this object is initially set to 'createAndWait' or 'createAndGo'. This object must not be set to 'active' unless the following columnar objects exist in this row: atmVclReceiveTrafficDescrIndex, atmVclTransmitTrafficDescrIndex. In addition, if the local VCL end-point is also the VCC end-point: atmVccAalType. In addition, for AAL5 connections only: atmVccAal5CpcsTransmitSduSize, atmVccAal5CpcsReceiveSduSize, and atmVccAal5EncapsType. |
| mpAtmTrafficTable | 1.3.6.1.4.1.119.2.3.3.13.16.9 | not-accessible | This table contains information on ATM traffic parameters. | |
| mpAtmTrafficEntry | 1.3.6.1.4.1.119.2.3.3.13.16.9.1 | not-accessible | This list contains ATM traffic parameters. | |
| INT mpAtmTrafficDescrParamIndex | 1.3.6.1.4.1.119.2.3.3.13.16.9.1.1 | INTEGER | read-only | Indicates the index of ATM traffic entry. |
| INT mpAtmTrafficCdv | 1.3.6.1.4.1.119.2.3.3.13.16.9.1.2 | INTEGER | read-write | Indicate the CDV(Cell Delay Variation) value |
| mpLis | 1.3.6.1.4.1.119.2.3.3.13.17 | |||
| mpLisNameTable | 1.3.6.1.4.1.119.2.3.3.13.17.1 | not-accessible | A table that is used for registoring LIS name. | |
| mpLisNameEntry | 1.3.6.1.4.1.119.2.3.3.13.17.1.1 | not-accessible | An entry of LIS name. | |
| INT mpLisIndex | 1.3.6.1.4.1.119.2.3.3.13.17.1.1.1 | INTEGER | read-only | A number that uniquely assigned to the LIS. |
| INT mpLisRtrIndex | 1.3.6.1.4.1.119.2.3.3.13.17.1.1.2 | INTEGER | read-only | An interface number that uniquely assigned to the LIS of the Unit. The LIS recognized by this number is the same as what is recognized by same number of ifIndex. |
| STR mpLisName | 1.3.6.1.4.1.119.2.3.3.13.17.1.1.3 | DisplayString | read-write | A name assigned to the LIS for management purpose. This object is used for setting or changing a name of the LIS. |
| INT mpLisNameStatus | 1.3.6.1.4.1.119.2.3.3.13.17.1.1.4 | INTEGER | read-write | This object is used for registoring or deleting an entry of the table. 1 is set when registroing and 2 is set when deletion. |
| mpLisAdminTable | 1.3.6.1.4.1.119.2.3.3.13.17.2 | not-accessible | A table including LIS information. | |
| mpLisAdminEntry | 1.3.6.1.4.1.119.2.3.3.13.17.2.1 | not-accessible | An entry in LIS management table. Registoring LIS (1) Manager satation generates a LIS entry in mpLisAdminTable by setting mpLisAdmRowStatus as createAndWait(5). (2) Manager station, if necessary, sets value of management object of mpLisAdminTable. (3) Manager station enables a LIS entry by setting mpLisAdmRowStatus as active(1). Deletion of LIS (1) Manager station disables a LIS entry bu setting mpLisAdmRowStatus as notInService(2). (2) A LIS is deleted by setting mpLisAdmRowStatus as destroy(6). An agent may release all related resources at the moment. | |
| INT mpLisAdmIndex | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.1 | INTEGER | read-only | This object shows a unique number assigned to this LIS. |
| INT mpLisAdmAtmArpSvExistence | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.2 | INTEGER | read-write | This object identifies extistence or non-existence of ATM ARP server. If it exists, 1 is set. If it does not exist, 2 is set. |
| INT mpLisAdmAtmArpSvCallType | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.3 | INTEGER | read-write | This object shows a type of connection between the LIS and an ATM ARP server. If it is SVC, 1 is shown. If it is PVC, 2 is shown. |
| OCT mpLisAdmAtmArpSvAtmAddress | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.4 | OCTET STRING | read-write | This object assigns ATM address of an ATM ARP server in the LIS. |
| INT mpLisAdmAtmArpSvAtmPortNumber | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.5 | INTEGER | read-write | This object assigns a number of ATM port which is used when the LIS is connected to the ATM server by PVC. If these are conencted by SVC, this object shows currently assigned number of ATM port. |
| INT mpLisAdmAtmArpSvVpi | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.6 | INTEGER | read-write | This object assigns a number of VPI which is used when the LIS is connected to the ATM server by PVC. If these are conencted by SVC, this object shows currently assigned number of VPI. |
| INT mpLisAdmAtmArpSvVci | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.7 | INTEGER | read-write | This object assigns a number of VCI which is used when the LIS is connected to the ATM server by PVC. If these are conencted by SVC, this object shows currently assigned number of VCI. |
| INT mpLisAdmSvTrafficId | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.8 | INTEGER | read-write | This object assigns a number of traffic ID which is used when the LIS is connected to the ATM server. |
| INT mpLisAdmAtmArpSvVcStatus | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.9 | INTEGER | read-only | This object shows status of connection between the LIS and an ATM ARP server in follwing number: Open = 1 Being configurated = 2 Available to use = 3 Available to transmit to ATM = 4 Available to transmit and receiving to/from ATM = 5 Available to receive from ATM = 6 Being disconnected = 7 Waiting for disconnection = 8 |
| INT mpLisAdmAtmArpSvRetryCount | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.10 | INTEGER | read-only | This object shows the number of retrying of connection request caused by connection failure between ATM ARP server and the LIS. |
| INT mpLisAdmLisStatus | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.11 | INTEGER | read-only | This object shows status of connection between the LIS and an ATM ARP server in following number: the LIS is available = 1 waiting for In-ATM-ARP-request = 2 not available due to failure = 3 not available by configuration = 4 |
| OCT mpLisAdmMyAtmAddressSel | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.12 | OCTET STRING | read-write | This object assignes ATM address that is used by the LIS interface. |
| IP mpLisAdmMyIpAddress | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.13 | IpAddress | read-only | This object assignes IP address that is used by the LIS interface. |
| IP mpLisAdmMyNetMask | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.14 | IpAddress | read-only | This object assignes subnet mask of IP addresss that is used by the LIS interface. |
| INT mpLisAdmAtmPortNumber | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.15 | INTEGER | read-write | This object assignes number of ATM port that is used by the LIS interface. |
| INT mpLisAdmAtmArpTables | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.16 | INTEGER | read-only | This object shows the number of ARP tables that are registored in the LIS. |
| INT mpLisAdmSndMtuSize | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.17 | INTEGER | read-write | This object assigns the maximum size of transmitted AAL5 CPCS PDU payload in octet. |
| INT mpLisAdmRcvMtuSize | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.18 | INTEGER | read-write | This object assigns the maximum size of received AAL5 CPCS PDU payload in octet. |
| INT mpLisAdmTrafficId | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.19 | INTEGER | read-write | This object shows the number of default traffic ID that is used by the LIS interface. |
| ROW mpLisAdmRowStatus | 1.3.6.1.4.1.119.2.3.3.13.17.2.1.20 | RowStatus | read-write | The object is used for generating, deleting or modifying a row of the table. In case of of modifying this entry, this object must be changed from active(1) to notInService(2). |
| mpLisAtmArpAdminTable | 1.3.6.1.4.1.119.2.3.3.13.17.3 | not-accessible | The table includes information of ATM ARP table. | |
| mpLisAtmArpAdminEntry | 1.3.6.1.4.1.119.2.3.3.13.17.3.1 | not-accessible | The entry includes information of each ATM ARP table. Registration of PVC or static SVC (1) Manager generates an ATM ARP management entry in mpLisAtmArpAdminTable by setting mpLisAtmArpAdmRowStatus as createAndWait(5). (2) Manager sets the number of management object of mpLisAtmArpAdminTable if necessary. (3) Manager enables the ATM ARP entry by setting mpLisAtmArpAdmRowStatus as active(1). Deletion of PVC or static SVC (1) Manager disables the ATM ARP entry by setting mpLisAtmArpAdmRowStatus as notInService(2). (2) ATM ARP is deleted by setting mpLisAtmArpAdmRowStatus as destroy(6). An agent may release all related resources at the moment. | |
| INT mpLisAtmArpAdmLisIndex | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.1 | INTEGER | read-only | This object shows the unique number assigned to the LIS. |
| INT mpLisAtmArpAdmCallType | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.2 | INTEGER | read-write | This object shows the type of connection between ATM ARP client and the LIS. If it is dynamic SVC, 1 is shown. If it is static SVC, 2 is shown. If it is PVC with aging, 3 is shown. If it is PVC without aging, 3 is shown. |
| IP mpLisAtmArpAdmIpAddress | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.3 | IpAddress | read-only | This object is used for configuring or acknowledging of destination IP address. if the connection between ATM ARP client and the LIS is PVC. If the connection is dynamic SVC or static SVC, the object cannot be set. However it shows the currently used destination IP address. |
| OCT mpLisAtmArpAdmAtmAddress | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.4 | OCTET STRING | read-write | This object is used for configuring or acknowledging of destination ATM address. if the connection between ATM ARP client and the LIS is PVC. If the connection is dynamic SVC or static SVC, the object cannot be set. However it shows the currently used destination ATM address. |
| OCT mpLisAtmArpAdmMyAtmAddress | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.5 | OCTET STRING | read-only | This object assigns an ATM address that is used at the interface of the LIS. |
| INT mpLisAtmArpAdmAtmPortNumber | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.6 | INTEGER | read-write | This object assigns a number of ATM port which is used when the LIS is connected to the ATM client by PVC. If these are conencted by dynamic SVC or static SVC, this object shows currently assigned number of ATM port. |
| INT mpLisAtmArpAdmVpi | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.7 | INTEGER | read-write | This object assigns a number of VPI which is used when the LIS is connected to the ATM client by PVC. If these are conencted by dynamic SVC or static SVC, this object shows currently assigned number of VPI. |
| INT mpLisAtmArpAdmVci | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.8 | INTEGER | read-write | This object assigns a number of VCI which is used when the LIS is connected to the ATM client by PVC. If these are conencted by dynamic SVC or static SVC, this object shows currently assigned number of VCI. |
| INT mpLisAtmArpAdmTrafficId | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.9 | INTEGER | read-write | This object shows the number of traffic ID that is used for PVC connection between ATM ARP cliennt and the LIS. |
| INT mpLisAtmArpAdmTableStatus | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.10 | INTEGER | read-only | This object shows status of ATM ARP table in follwing number: the table is available = 1 waiting for acknowledge of being available = 2 waiting for ATM-ARP-reply = 3 waiting for InATM-ARP-reply = 4 aging = 5 not available to service = 6 not available to use = 7 |
| GAU mpLisAtmArpAdmAgingTime | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.11 | Gauge | read-only | Indicates the passing time value (sec) of the ATMARP table aging timer. The timer is incre- mented by 1 sec. |
| INT mpLisAtmArpAdmRetryCount | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.12 | INTEGER | read-only | This object shows the number of retrying of connection request caused by connection failure between ATM ARP client and the LIS. |
| ROW mpLisAtmArpAdmRowStatus | 1.3.6.1.4.1.119.2.3.3.13.17.3.1.13 | RowStatus | read-write | The object is used for generating, deleting or modifying a row of the table. In case of modifying this entry. This object must be changed from active(1) to notInService(2). |
| mpLisVcAdminTable | 1.3.6.1.4.1.119.2.3.3.13.17.4 | not-accessible | The table includes information of VC table. | |
| mpLisVcAdminEntry | 1.3.6.1.4.1.119.2.3.3.13.17.4.1 | not-accessible | The entry includes information of each VC. | |
| INT mpLisVcAdmLisIndex | 1.3.6.1.4.1.119.2.3.3.13.17.4.1.1 | INTEGER | read-only | This object shows the unique number assigned to the LIS. |
| IP mpLisVcAdmIpAddress | 1.3.6.1.4.1.119.2.3.3.13.17.4.1.2 | IpAddress | read-only | This object assign the destination IP address. |
| INT mpLisVcAdmType | 1.3.6.1.4.1.119.2.3.3.13.17.4.1.3 | INTEGER | read-only | This object shows the type of VC management table. If the table is generated by originating connection, the type is 1. If the table is generated by receiving connection, the type is 2. |
| INT mpLisVcAdmVcStatus | 1.3.6.1.4.1.119.2.3.3.13.17.4.1.4 | INTEGER | read-only | This object shows the status of VC connection as following numbers: Open = 1 Being configurated = 2 Available to use = 3 Available to transmit to ATM = 4 Available to transmit and receiving to/from ATM = 5 Available to receive from ATM = 6 Being disconected = 7 Waiting for disconection =8 |
| GAU mpLisVcAdmInactivityTime | 1.3.6.1.4.1.119.2.3.3.13.17.4.1.5 | Gauge | read-only | Indicates the passing time value (sec) of the inactivity timer. The timer is incremented by 1 sec. |
| GAU mpLisVcAdmHoldingTime | 1.3.6.1.4.1.119.2.3.3.13.17.4.1.6 | Gauge | read-only | Indicates the remaining time value (sec) of the holding timer. The timer is incremented by 1 sec. |
| mpLisStatisticsTable | 1.3.6.1.4.1.119.2.3.3.13.17.5 | not-accessible | This object includes statistics information of the LIS. | |
| mpLisStatisticsEntry | 1.3.6.1.4.1.119.2.3.3.13.17.5.1 | not-accessible | This entry includes counters of each statistics information. | |
| INT mpLisStatIndex | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.1 | INTEGER | read-only | This object shows the unique number assigned to the LIS. |
| CTR mpLisStatAtmArpRequestSends | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.2 | Counter | read-only | This object shows the number of transmission of ATM ARP request. |
| CTR mpLisStatAtmArpReplyReceives | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.3 | Counter | read-only | This object shows the number of receiving of ATM ARP reply. |
| CTR mpLisStatAtmArpNakReceives | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.4 | Counter | read-only | This object shows the number of receiving of ATM ARP NAK. |
| CTR mpLisStatAtmArpReplyTimeouts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.5 | Counter | read-only | This object shows the number of timed-out in waiting for ATM ARP reply. |
| CTR mpLisStatInAtmArpRequestSends | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.6 | Counter | read-only | This object shows the number of transmission of InATM ARP request. |
| CTR mpLisStatInAtmArpReplyReceives | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.7 | Counter | read-only | This object shows the number of receiving of InATM ARP reply. |
| CTR mpLisStatInAtmArpRequestReceives | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.8 | Counter | read-only | This object shows the number of receiving of InATM ARP request. |
| CTR mpLisStatInAtmArpReplyTimeouts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.9 | Counter | read-only | This object shows the number of timed-out in waiting for InATM ARP reply. |
| CTR mpLisStatVcInactDisconnects | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.10 | Counter | read-only | This object shows the number of disconenction by inactivity timer. |
| CTR mpLisStatVcResourceDisconnects | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.11 | Counter | read-only | This object shows the number of disconenction by resource limitation. |
| CTR mpLisStatAtmArpTableAgingouts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.12 | Counter | read-only | This object show the number of ATM ARP table that is deleted due to aged out. |
| CTR mpLisStatAtmArpTableDeletions | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.13 | Counter | read-only | This object show the number of ATM ARP table that is deleted due to resource limitation. |
| CTR mpLisStatInPkts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.14 | Counter | read-only | This object show the number of packets transmitted to IP router part. |
| CTR mpLisStatInReceivePkts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.15 | Counter | read-only | This object show the number of packets received from ATM interface. |
| CTR mpLisStatInDiscards | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.16 | Counter | read-only | This object show the number of packets that are discarded due to resource limitation. |
| CTR mpLisStatInMtuSizeOvers | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.17 | Counter | read-only | This object show the number of discarded packets due to exceeding MTU. |
| CTR mpLisStatInSnapErrs | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.18 | Counter | read-only | This object show the number of discarded packets due to format error of SNAP in IP over ATM. |
| CTR mpLisStatOutPkts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.19 | Counter | read-only | This object show the number of packets received from IP router part. |
| CTR mpLisStatOutTransmitPkts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.20 | Counter | read-only | This object show the number of packets transmitted to ATM interface. |
| CTR mpLisStatOutNoRoutes | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.21 | Counter | read-only | This object show the number of discarded packets due to route unknown. |
| CTR mpLisStatOutSvFaults | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.22 | Counter | read-only | This object show the number of discarded packets due to failure of ATM ARP server. |
| CTR mpLisStatOutCircuitFaults | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.23 | Counter | read-only | This object show the number of discarded packets due to failure of link. |
| CTR mpLisStatOutMaxQueues | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.24 | Counter | read-only | This object show the number of discarded packets due to overflowing queue. |
| CTR mpLisStatOutDestUnusuals | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.25 | Counter | read-only | This object show the number of discarded packets due to illegal destination. |
| CTR mpLisStatOutMtuSizeOvers | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.26 | Counter | read-only | This object show the number of discarded packets that are received from IP router part due to exceeding MTU. |
| CTR mpLisStatOutVcFailures | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.27 | Counter | read-only | This object show the number of discarded packets due to configuration failure of connection. |
| CTR mpLisStatOutDiscards | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.28 | Counter | read-only | This object show the number of discarded packets due to resource limitation in transmitting. |
| CTR mpLisStatOutMaxVcExceeds | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.29 | Counter | read-only | This object show the number of discarded packets due to exceeding the maximum number of VC connection. |
| CTR mpLisStatVcSetupCounts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.30 | Counter | read-only | This object shows the number of configuring of call. |
| CTR mpLisStatVcMaxExceedFailCounts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.31 | Counter | read-only | This object shows the number of failure of call configuration due to exceeding the maximum simultaneous connections of VC. |
| CTR mpLisStatVcResourceFailCounts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.32 | Counter | read-only | This object shows the number of failure of call configuration due to resource limitation. |
| CTR mpLisStatVcAcceptCounts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.33 | Counter | read-only | This object shows the number of called by ATM ARP client. |
| CTR mpLisStatVcMaxExceedDenyCounts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.34 | Counter | read-only | This object shows the number of refusing incoming call due to exceeding the maximum simultaneous connections of VC. |
| CTR mpLisStatVcResourceDenyCounts | 1.3.6.1.4.1.119.2.3.3.13.17.5.1.35 | Counter | read-only | This object shows the number of refusing incoming call due to resource limitation. |
| INT mpLisPvcRegistNumber | 1.3.6.1.4.1.119.2.3.3.13.17.6 | INTEGER | read-only | This object shows the total number of currently registored PVC. |
| INT mpLisStSvcRegistNumber | 1.3.6.1.4.1.119.2.3.3.13.17.7 | INTEGER | read-only | This object shows the total number of currently registored static SVC. |
| INT mpLisVcConnectNumber | 1.3.6.1.4.1.119.2.3.3.13.17.8 | INTEGER | read-only | This object shows the total number of currently connected VC in IP over ATM functional block. |
| INT mpLisSysInactivityTimer | 1.3.6.1.4.1.119.2.3.3.13.17.9 | INTEGER | read-write | This object shows the value of inactivity timer in second. |
| INT mpLisSysHoldingTimer | 1.3.6.1.4.1.119.2.3.3.13.17.10 | INTEGER | read-write | This object shows the value of holding timer in second. |
| INT mpLisSysAtmArpReplyTimer | 1.3.6.1.4.1.119.2.3.3.13.17.11 | INTEGER | read-write | This object shows the value of ATM ARP reply waiting timer in second. |
| INT mpLisSysInAtmArpRequestTimer | 1.3.6.1.4.1.119.2.3.3.13.17.12 | INTEGER | read-write | This object shows the value of In ATM ARP request waiting timer in second. |
| INT mpLisSysInAtmArpReplyTimer | 1.3.6.1.4.1.119.2.3.3.13.17.13 | INTEGER | read-write | This object shows the value of In ATM ARP reply waiting timer in second. |
| INT mpLisSysAtmArpAgingTime | 1.3.6.1.4.1.119.2.3.3.13.17.14 | INTEGER | read-write | This object sets the aging time of ATM ARP in second. |
| INT mpLisSysAtmArpSvPollTime | 1.3.6.1.4.1.119.2.3.3.13.17.15 | INTEGER | read-write | This obhject sets cycle time to check status of VC connection of ATM ARP server in second. |
| INT mpLisSysAtmArpSvRetry | 1.3.6.1.4.1.119.2.3.3.13.17.16 | INTEGER | read-write | This object sets the number of retrying in case of failure of call configuration to ATM ARP server. |
| INT mpLisSysAtmArpClRetry | 1.3.6.1.4.1.119.2.3.3.13.17.17 | INTEGER | read-write | This object sets the number of retrying in case of failure of call configuration to ATM ARP client. |
| INT mpLisSysAtmArpReqRetry | 1.3.6.1.4.1.119.2.3.3.13.17.18 | INTEGER | read-write | This object sets tne number of retrying of ATM ARP request in case of no response from ATM ARP server to which ATM ARP request is sent before timer expiration. |
| INT mpLisSysInAtmArpReqRetry | 1.3.6.1.4.1.119.2.3.3.13.17.19 | INTEGER | read-write | This object sets tne number of retrying of InATM ARP request in case of no response from ATM ARP client to which InATM ARP request is sent before timer expiration. |
| INT mpLisSysMaxVcConnect | 1.3.6.1.4.1.119.2.3.3.13.17.20 | INTEGER | read-write | This object sets the maximum number of simultaneous connections that is used in IP over ATM functional block. This number is the sum of PVC, dynamic SVC and static SVC that are able to connect simultaneously. |
| INT mpLisSysMaxQueueNumber | 1.3.6.1.4.1.119.2.3.3.13.17.21 | INTEGER | read-write | The object sets the maximum number of queues include packets that are received from IP router. |
| mpDns | 1.3.6.1.4.1.119.2.3.3.13.18 | |||
| mpDnsClientNameServerTable | 1.3.6.1.4.1.119.2.3.3.13.18.1 | not-accessible | Table of DNS name server IP addresses. | |
| mpDnsClientNameServerEntry | 1.3.6.1.4.1.119.2.3.3.13.18.1.1 | not-accessible | Entry of DNS name server IP address. | |
| IP mpDnsClientServerEntIpAddress | 1.3.6.1.4.1.119.2.3.3.13.18.1.1.1 | IpAddress | read-only | DNS name server IP address. |
| INT mpDnsClientServerEntStatus | 1.3.6.1.4.1.119.2.3.3.13.18.1.1.2 | INTEGER | read-write | DNS name server table entry status. |
| mpDnsClientStaticRRTable | 1.3.6.1.4.1.119.2.3.3.13.18.2 | not-accessible | Table of DNS Resource Records(RR). | |
| mpDnsClientStaticRREntry | 1.3.6.1.4.1.119.2.3.3.13.18.2.1 | not-accessible | Entry of DNS Resource Record. | |
| INT mpDnsClientStaticRREntIndex | 1.3.6.1.4.1.119.2.3.3.13.18.2.1.1 | INTEGER | read-only | Index of a particular entry. |
| STR mpDnsClientStaticRREntHostName | 1.3.6.1.4.1.119.2.3.3.13.18.2.1.2 | DisplayString | read-write | The RR's host name field. |
| INT mpDnsClientStaticRREntTimeToLive | 1.3.6.1.4.1.119.2.3.3.13.18.2.1.3 | INTEGER | read-write | The RR's Time to Live field. Currently, this value can be set to -1 (infinity) only. |
| INT mpDnsClientStaticRREntType | 1.3.6.1.4.1.119.2.3.3.13.18.2.1.4 | INTEGER | read-write | The RR's type field. |
| IP mpDnsClientStaticRREntIpAddress | 1.3.6.1.4.1.119.2.3.3.13.18.2.1.5 | IpAddress | read-write | The RR's IP address field. |
| INT mpDnsClientStaticRREntStatus | 1.3.6.1.4.1.119.2.3.3.13.18.2.1.6 | INTEGER | read-write | The RR's entry status. |
| mpDnsClientLocalDomainTable | 1.3.6.1.4.1.119.2.3.3.13.18.3 | not-accessible | Table of DNS local domain names. | |
| mpDnsClientLocalDomainEntry | 1.3.6.1.4.1.119.2.3.3.13.18.3.1 | not-accessible | Entry of DNS local domain name. | |
| INT mpDnsClientLocalDomainEntIndex | 1.3.6.1.4.1.119.2.3.3.13.18.3.1.1 | INTEGER | read-only | Index of a particular entry. |
| STR mpDnsClientLocalDomainEntName | 1.3.6.1.4.1.119.2.3.3.13.18.3.1.2 | DisplayString | read-write | Local domain name field. |
| INT mpDnsClientLocalDomainEntStatus | 1.3.6.1.4.1.119.2.3.3.13.18.3.1.3 | INTEGER | read-write | Local domain table entry status. |
| INT mpDnsClientMaxTimeToLive | 1.3.6.1.4.1.119.2.3.3.13.18.4 | INTEGER | read-write | DNS cache maximum Time to Live(TTL). |
| CTR mpDnsClientNumberOfQueries | 1.3.6.1.4.1.119.2.3.3.13.18.5 | Counter | read-only | A counter on how many RR queries have been sent to name server(s). |
| CTR mpDnsClientNumberOfResponses | 1.3.6.1.4.1.119.2.3.3.13.18.6 | Counter | read-only | A counter on how many RR responses have been received from name server(s). |
| mpLec | 1.3.6.1.4.1.119.2.3.3.13.19 | |||
| mpLecConfigTable | 1.3.6.1.4.1.119.2.3.3.13.19.1 | not-accessible | Indicates the table of the LEC information. | |
| mpLecConfigEntry | 1.3.6.1.4.1.119.2.3.3.13.19.1.1 | not-accessible | Indicates the entry of the LEC information. | |
| INT mpLecIndex | 1.3.6.1.4.1.119.2.3.3.13.19.1.1.1 | INTEGER | read-only | Indicates the index value to identify this entry. |
| INT mpLecArpCacheDeleteTime | 1.3.6.1.4.1.119.2.3.3.13.19.1.1.2 | INTEGER | read-write | The aging time for the unused ARP cache entry (sec). |
| INT mpLecUnsolicArpResAccept | 1.3.6.1.4.1.119.2.3.3.13.19.1.1.3 | INTEGER | read-write | Indicate whether the LEC does the address learning by the LE_ARP_RESPONSE which is broadcasted to another LEC, or not. If the value 'enabled(1)' is set, the LEC does the address learning. If the value 'disabled(2)' is set, the LEC does not do the address learning. |
| INT mpLecVccAgingAction | 1.3.6.1.4.1.119.2.3.3.13.19.1.1.4 | INTEGER | read-write | Indicate whether the LEC disconnects the unused VCC for a time defined as C12. The time value is given by the lecVCCTimeoutPeriod (LEC MIB). If the value 'noCut(1)' is set, the LEC does not disconnect the VCC. If the value 'myConnectCut(2)' is set, the LEC disconnects only the VCC which the LEC sets up. If the value 'otherConnectCut(3)' is set, the LEC disconnects only the VCC which the destination LEC sets up. If the value 'allCut(4)' is set, the LEC disconnects all the VCCs. |
| INT mpLecUnknownFrameSendTiming | 1.3.6.1.4.1.119.2.3.3.13.19.1.1.5 | INTEGER | read-write | Indicate the timing to send an unknown frame to the BUS. If the value 'soon(1)' is set, the LEC sends the packet immediately. If the value 'later(2)' is set, the LEC sends the packet after a time defined by mpLeUnknownFrameWaitTime. If the value 'noSend(3)' is set, the LEC does not send the packet. |
| INT mpLecType | 1.3.6.1.4.1.119.2.3.3.13.19.1.1.6 | INTEGER | read-write | Indicates one of the LEC types described as follows: a) The LEC defined by ATM Forum b) The proprietary LEC (serverless method) defined by NEC. If it is set to '1', this entry uses the method defined by ATM Forum. If it is set to '2', this entry uses the proprietary LEC defined by NEC. |
| INT mpLecPrimaryAtmInterface | 1.3.6.1.4.1.119.2.3.3.13.19.1.1.7 | INTEGER | read-write | Indicates number of ATM port which is used for decision of primary ATM address. |
| INT mpLecDefaultSendTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.1.1.8 | INTEGER | read-write | Indicates the number of default send traffic ID that is used by LEC. |
| OCT mpLecAtmAddressSel | 1.3.6.1.4.1.119.2.3.3.13.19.1.1.9 | OCTET STRING | read-write | Indicates SEL of primary ATM address for LEC |
| INT mpLecDefaultRcvTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.1.1.10 | INTEGER | read-write | Indicates the number of default receive traffic ID that is used by LEC. |
| INT mpLecLecsId | 1.3.6.1.4.1.119.2.3.3.13.19.1.1.11 | INTEGER | read-write | Indicates the number of Lecs ID that is used by LEC. |
| mpLecsConfigTable | 1.3.6.1.4.1.119.2.3.3.13.19.2 | not-accessible | Indicates the table of LECS information. | |
| mpLecsConfigEntry | 1.3.6.1.4.1.119.2.3.3.13.19.2.1 | not-accessible | Indicates the table entry of LECS information. LECS Registration: 1) The object 'mpLecsRowStatus' is set to 'createAndWait(5)', to create LECS entry into the table 'mpLecsConfigTable'. 2) The appropriate values are set to the object 'mpLecsConfigTable'. 3) 'active(1)' is set to the object 'mpLecRowStatus', to activate the LECS entry. LECS deletion: 1) 'notInService(2)' is set to the object 'mpLecsRowStatus', to deactivate the LECS entry. 2) 'destroy(6)' is set to the object 'mpLecRowStatus', to delete the LECS entry. | |
| INT mpLecsIndex | 1.3.6.1.4.1.119.2.3.3.13.19.2.1.1 | INTEGER | read-only | Indicates the index value to identify this table entry. |
| INT mpLecsCallType | 1.3.6.1.4.1.119.2.3.3.13.19.2.1.2 | INTEGER | read-write | Indicates the type of the connection between this LEC and the LECS. If it is set to '1', the type is SVC for ATM address registration. If it is set to '2', the type is PVC for VPI/VCI registration. |
| OCT mpLecsAtmAddress | 1.3.6.1.4.1.119.2.3.3.13.19.2.1.3 | OCTET STRING | read-write | Indicates the ATM address of the LECS. |
| INT mpLecsInterface | 1.3.6.1.4.1.119.2.3.3.13.19.2.1.4 | INTEGER | read-write | Indicates the ATM interface number to which the LECS is connected. |
| INT mpLecsConfigDirectVpi | 1.3.6.1.4.1.119.2.3.3.13.19.2.1.5 | INTEGER | read-write | Indicates the VPI of the Configuration Direct VCC. |
| INT mpLecsConfigDirectVci | 1.3.6.1.4.1.119.2.3.3.13.19.2.1.6 | INTEGER | read-write | Indicates the VCI of the Configuration Direct VCC. |
| INT mpLecsConfigDirectSendTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.2.1.7 | INTEGER | read-write | Indicates the send traffic ID of the Configuration Direct VCC. |
| ROW mpLecsRowStatus | 1.3.6.1.4.1.119.2.3.3.13.19.2.1.8 | RowStatus | read-write | This object is used to create, delete, or modify the row within this table. Within each conceptual mpLecsConfigTable row, objects which are writable may be modified regardless of the value of mpLecsRowStatus. It is not necessary to set a row's status to 'notInService' first. |
| INT mpLecsConfigDirectRcvTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.2.1.9 | INTEGER | read-write | Indicates receive the traffic ID of the Configuration Direct VCC. |
| mpLecServerConfigTable | 1.3.6.1.4.1.119.2.3.3.13.19.3 | not-accessible | Indicates the table of the Server Information. | |
| mpLecServerConfigEntry | 1.3.6.1.4.1.119.2.3.3.13.19.3.1 | not-accessible | Indicates the entry of the Server Information. | |
| INT mpLecSvIndex | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.1 | INTEGER | read-only | Indicates the lecIndex of the LEC which corresponds to this entry. |
| INT mpLecSvConfigLecsType | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.2 | INTEGER | read-write | Indicates whether the LECS registered in the table 'mpLecsConfigTable' is used or not, when 'automatic(1)' is set to the object 'lecConfigMode'(LEC MIB). If it is set to '2', the LECS is not used. In case when the LECS registered is not used, the LECS should be specified by the method defined by ATM Forum. |
| INT mpLecSvConfigLecsIndex | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.3 | INTEGER | read-write | Indicates the 'mpLecsIndex' of the table 'mpLecsConfigTable', to identify the LECS. This object is valid only when 'enable(1)' is set to the object 'mpLecsSvConfigLecsType'. |
| INT mpLecSvLesCallType | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.4 | INTEGER | read-write | Indicates the type of the connection between this LEC and the LES. |
| INT mpLecSvCtrlDirectVccInterface | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.5 | INTEGER | read-write | Indicates the ATM interface number on which the Control Direct VCC is set. |
| INT mpLecSvCtrlDirectVpi | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.6 | INTEGER | read-write | Indicates the VPI of this Control Direct VCC. |
| INT mpLecSvCtrlDirectVci | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.7 | INTEGER | read-write | Indicates the VCI of this Control Direct VCC. |
| INT mpLecSvCtrlDirectSendTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.8 | INTEGER | read-write | Indicates the shaper send traffic ID of the Control Direct VCC. |
| INT mpLecSvCtrlDistributeVccInterface | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.9 | INTEGER | read-write | Indicates the ATM interface number on which the Control Distribute VCC is set. |
| INT mpLecSvCtrlDistributeVpi | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.10 | INTEGER | read-write | Indicates the VPI of the Control Distribute VCC. |
| INT mpLecSvCtrlDistributeVci | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.11 | INTEGER | read-write | Indicates the VCI of the Control Distribute VCC. |
| INT mpLecSvCtrlDistributeSendTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.12 | INTEGER | read-write | Indicates the send traffic ID of the Control Distribute VCC. |
| INT mpLecSvBusCallType | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.13 | INTEGER | read-write | Indicates the type of the connection between this LEC and the BUS. If it is set to '1', the type is SVC specified by the address resolution function. If it is set to '2' the type is PVC for VPI/VCI registration. |
| INT mpLecSvMcastSendVccInterface | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.14 | INTEGER | read-write | Indicates the ATM interface number on which the Multicast Send VCC is set. |
| INT mpLecSvMcastSendVpi | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.15 | INTEGER | read-write | Indicates the VPI of the Multicast Send VCC. |
| INT mpLecSvMcastSendVci | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.16 | INTEGER | read-write | Indicates the VCI of the Multicast Send VCC. |
| INT mpLecSvMcastSendSendTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.17 | INTEGER | read-write | Indicates the send traffic ID of the Multicast Send VCC. |
| INT mpLecSvMcastForwardVccInterface | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.18 | INTEGER | read-write | Indicates the ATM interface number on which the Multicast Forward VCC is set. |
| INT mpLecSvMcastForwardVpi | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.19 | INTEGER | read-write | Indicates the VPI of the Multicast Forward VCC. |
| INT mpLecSvMcastForwardVci | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.20 | INTEGER | read-write | Indicates the VCI of the Multicast Forward VCC. |
| INT mpLecSvMcastForwardSendTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.21 | INTEGER | read-write | Indicates the send traffic ID of the Multicast Forward VCC. |
| INT mpLecSvCtrlDirectRcvTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.22 | INTEGER | read-write | Indicates the shaper receive traffic ID of the Control Direct VCC. |
| INT mpLecSvCtrlDistributeRcvTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.23 | INTEGER | read-write | Indicates the receive traffic ID of the Control Distribute VCC. |
| INT mpLecSvMcastSendRcvTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.24 | INTEGER | read-write | Indicates the receive traffic ID of the Multicast Send VCC. |
| INT mpLecSvMcastForwardRcvTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.3.1.25 | INTEGER | read-write | Indicates the receive traffic ID of the Multicast Forward VCC. |
| mpLeArpTable | 1.3.6.1.4.1.119.2.3.3.13.19.4 | not-accessible | Indicates the table of the LE-ARP information. | |
| mpLeArpEntry | 1.3.6.1.4.1.119.2.3.3.13.19.4.1 | not-accessible | Indicates the entry of the LE-ARP information. The LE-ARP address information is registered by the following procedure ; 1) The NW manager creates LE-ARP table entry in mpLeArpTable, by setting 'createAndWait(5)' to LeArpRowStatus. 2) The NW manager sets the appropriate values to the objects contained in mpLeArpTable. 3) The NW manager activates the LE-ARP table entry, by setting 'active(1)' to LeArpRowStatus. The LE-ARP address information is deleted by the following procedure ; 1) The NW manager inactivates the LE-ARP table entry, by setting 'notInService(2)' to LeArpRowStatus. 2) The LE-ARP table entry is deleted, by setting 'destroy(6)' to LeArpRowStatus. | |
| INT mpLeArpLecIndex | 1.3.6.1.4.1.119.2.3.3.13.19.4.1.1 | INTEGER | read-only | Indicates the 'lecIndex' of this client. |
| MAC mpLeArpMacAddress | 1.3.6.1.4.1.119.2.3.3.13.19.4.1.2 | MacAddress | read-only | The MAC address for which this cache entry provides a translation. |
| INT mpLeArpCallType | 1.3.6.1.4.1.119.2.3.3.13.19.4.1.3 | INTEGER | read-write | Indicates the virtual circuit connection type of the LE-ARP entry. If it is set to '1', it is SVC connection. If it is set to '2', it is PVC connection. It is used to set the connection type when an entry is added to the object 'mpLeArpTable'. |
| INT mpLeArpInterface | 1.3.6.1.4.1.119.2.3.3.13.19.4.1.4 | INTEGER | read-write | Indicates the ATM interface number of this LE-ARP entry. In case of PVC connection, this object is used to set and confirm the ATM interface number which is used. In case of SVC connection, it is used to display the ATM interface number which is currently used, but it cannot be used to set. |
| INT mpLeArpVpi | 1.3.6.1.4.1.119.2.3.3.13.19.4.1.5 | INTEGER | read-write | Indicates the VPI value of this LE-ARP entry. In case of PVC connection, this object is used to set and confirm the VPI value which is used. In case of SVC connection, it is used to display the VPI value which is currently used, but it cannot be used to set. |
| INT mpLeArpVci | 1.3.6.1.4.1.119.2.3.3.13.19.4.1.6 | INTEGER | read-write | Indicates the VCI value of this LE-ARP entry. In case of PVC connection, this object is used to set and confirm the VCI value which is used. In case of SVC connection, it is used to display the VCI value which is currently used, but it cannot be used to set. |
| INT mpLeArpSendTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.4.1.7 | INTEGER | read-write | Indicates the send traffic ID which is used by the LE-ARP entry. In case of PVC connection, this object is used to set and confirm the used traffic ID. In case of SVC connection, it is used to display the used traffic ID, but it cannot be used to set. |
| INT mpLeArpRcvTrafficId | 1.3.6.1.4.1.119.2.3.3.13.19.4.1.8 | INTEGER | read-write | Indicates the receive traffic ID which is used by the LE-ARP entry. In case of PVC connection, this object is used to set and confirm the used traffic ID. In case of SVC connection, it is used to display the used traffic ID, but it cannot be used to set. |
| mpLecStatisticsTable | 1.3.6.1.4.1.119.2.3.3.13.19.5 | not-accessible | Indicates the table of the LEC statistics information. | |
| mpLecStatisticsEntry | 1.3.6.1.4.1.119.2.3.3.13.19.5.1 | not-accessible | Indicates the entry of statistics information counters. | |
| INT mpLecStatIndex | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.1 | INTEGER | read-only | Indicates the lecindex to identify the LEC which corresponds to this entry. |
| CTR mpLecStatVcSetupSndCounts | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.2 | Counter | read-only | Indicates the number of the call set-up done by the LAN Emulation function. |
| CTR mpLecStatVcSetupRcvCounts | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.3 | Counter | read-only | Indicates the number of the incoming call received by the LAN Emulation function. |
| CTR mpLecStatVcReleaseSndCounts | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.4 | Counter | read-only | Indicates the number of the call cleared by itself, by LAN Emulation function. |
| CTR mpLecStatVcReleaseRcvCounts | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.5 | Counter | read-only | Indicates the number of the call cleared by the destination entity, by LAN Emulation function. |
| CTR mpLecStatInContFrameFailures | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.6 | Counter | read-only | Indicates the number of the discarded control frames received. |
| CTR mpLecStatInDataFrameFailures | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.7 | Counter | read-only | Indicates the number of discarded data frames received. |
| CTR mpLecStatInNarpRequests | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.8 | Counter | read-only | Indicates the number of the received LENARP REQUEST frames. |
| CTR mpLecStatInTopologyRequests | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.9 | Counter | read-only | Indicates the number of the received LE-TOPOLOGY-REQUEST frames. |
| CTR mpLecStatInBusUcastFrames | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.10 | Counter | read-only | Indicates the number of the unknown unicast frames received from the BUS. |
| CTR mpLecStatInBusMcastFrames | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.11 | Counter | read-only | Indicates the number of the multicast frames received from the BUS. |
| CTR mpLecStatInBusBcastFrames | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.12 | Counter | read-only | Indicates the number of the broadcast frames received from the BUS. |
| CTR mpLecStatOutContFrameFailures | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.13 | Counter | read-only | Indicates the number of the discarded control frames to be sent. |
| CTR mpLecStatOutDataFrameFailures | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.14 | Counter | read-only | Indicates the number of the discarded data frames to be sent. |
| CTR mpLecStatOutNarpRequests | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.15 | Counter | read-only | Indicates the number of the LE-N&RP- REQUEST frames sent. |
| CTR mpLecStatOutTopologyRequests | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.16 | Counter | read-only | Indicates the number of the LE TOPOLOGY@ REQUEST frames sent. |
| CTR mpLecStatOutBusUcastFrames | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.17 | Counter | read-only | Indicates the number of the unknown unicast frames sent to the BUS. |
| CTR mpLecStatOutBusMcastFrames | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.18 | Counter | read-only | Indicates the number of the multicast frames sent to the BUS. |
| CTR mpLecStatOutBusBcastFrames | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.19 | Counter | read-only | Indicates the number of the broadcast frames sent to the BUS. |
| CTR mpLecStatEchoControlFrames | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.20 | Counter | read-only | Indicates the number of the echo frames of control frame. The echo frame is that Lec ID of received control frame is self Lec ID |
| CTR mpLecStatInNoIDEntryDataFrames | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.21 | Counter | read-only | Indicates the number of received data frames without being switched by IPFE. |
| CTR mpLecStatOutNoIDEntryDataFrames | 1.3.6.1.4.1.119.2.3.3.13.19.5.1.22 | Counter | read-only | Indicates the number of sent data frames without being switched by IPFE. |
| INT mpLecElanTotalCount | 1.3.6.1.4.1.119.2.3.3.13.19.6 | INTEGER | read-only | Indicates the number of Emulated LAN (ELAN) currently configured. |
| INT mpLecSysMaxVcConnect | 1.3.6.1.4.1.119.2.3.3.13.19.7 | INTEGER | read-write | Indicates the number of the virtual circuits which are possible to be set simultaneously, used by LEC function. It is the total number of PVCs and SVCs which is possible to be set simultaneously. |
| mpMpc | 1.3.6.1.4.1.119.2.3.3.13.20 | |||
| mpMpcCfgTable | 1.3.6.1.4.1.119.2.3.3.13.20.1 | not-accessible | Indicates the configuration table of the MPC information. | |
| mpMpcCfgEntry | 1.3.6.1.4.1.119.2.3.3.13.20.1.1 | not-accessible | Indicates the configuration entry of the MPC information. | |
| INT mpMpcCfgIndex | 1.3.6.1.4.1.119.2.3.3.13.20.1.1.1 | INTEGER | read-only | Indicates the index of the MPC which corresponds to this entry. |
| INT mpMpcOperatStatus | 1.3.6.1.4.1.119.2.3.3.13.20.1.1.2 | INTEGER | read-only | Indicates the operation status of MPC. It indicates whether MPC is actually active or not. |
| INT mpMpcSndTrafficId | 1.3.6.1.4.1.119.2.3.3.13.20.1.1.3 | INTEGER | read-write | Indicate the traffic ID which is specified when MPC connects VC. |
| INT mpMpcRcvTrafficId | 1.3.6.1.4.1.119.2.3.3.13.20.1.1.4 | INTEGER | read-write | Indicate the traffic ID which is specified when MPC connects VC. |
| INT mpMpcPrtNum | 1.3.6.1.4.1.119.2.3.3.13.20.1.1.5 | INTEGER | read-write | This object assigns a number of ATM port which is used when the MPC is connected. |
| INT mpMpcMaxMps | 1.3.6.1.4.1.119.2.3.3.13.20.1.1.6 | INTEGER | read-write | Indicate the maximum number of MPSs which can be recognized by MPC. MPC is created so as to recognize MPS up to the value set by this object. |
| INT mpMpcMaxCache | 1.3.6.1.4.1.119.2.3.3.13.20.1.1.7 | INTEGER | read-write | Indicate the maximum number of cache entry which can be recognized by MPC. MPC is created so as to have cache up to the value set by this object. Both Ingress cache and Egress cache are set. |
| mpMpcCacheCntTable | 1.3.6.1.4.1.119.2.3.3.13.20.2 | not-accessible | Indicates the MPoA Client cache table which includes used number of MPC cache managed by agent. | |
| mpMpcCacheCntEntry | 1.3.6.1.4.1.119.2.3.3.13.20.2.1 | not-accessible | Indicates the MPoA Client cache entry which includes used number of MPC cache managed by agent. | |
| INT mpMpcCacheCntIndex | 1.3.6.1.4.1.119.2.3.3.13.20.2.1.1 | INTEGER | read-only | Indicates the index of the MPC which corresponds to this entry. |
| INT mpMpcIngressCacheCnt | 1.3.6.1.4.1.119.2.3.3.13.20.2.1.2 | INTEGER | read-only | Indicates the number of Ingress cache which is being used by MPC. This object is used to know the use for the value set by mpMpcMaxCache. |
| INT mpMpcEgressCacheCnt | 1.3.6.1.4.1.119.2.3.3.13.20.2.1.3 | INTEGER | read-only | Indicates the number of Egress cache which is being used by MPC. This object is used to know the use for the value set by mpMpcMaxCache. |
| INT mpMpcMaxReqSelNum | 1.3.6.1.4.1.119.2.3.3.13.20.3 | INTEGER | read-write | Indicates the number of SELs which can be used by all MPC managed by this agent and which are used for capsuling IP. |
| INT mpMpcUseSelNum | 1.3.6.1.4.1.119.2.3.3.13.20.4 | INTEGER | read-only | Indicates the number of SELs which is being used by all MPC managed by this agent and which are used for capsuling IP. |
| mpStp | 1.3.6.1.4.1.119.2.3.3.13.21 | |||
| mpStpVlanTable | 1.3.6.1.4.1.119.2.3.3.13.21.1 | not-accessible | A table that contains information for the Spanning Tree Protocol. | |
| mpStpVlanEntry | 1.3.6.1.4.1.119.2.3.3.13.21.1.1 | not-accessible | A list of information about the Spanning Tree Protocol. | |
| INT mpStpVlanIndex | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.1 | INTEGER | read-only | Indicates the index value to identify this table entry. |
| INT mpStpVlanProtocolSpecification | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.2 | INTEGER | read-only | An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1d implementations will return 'ieee8021d(3)'. If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined. |
| INT mpStpVlanPriority | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.3 | INTEGER | read-write | The value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress. |
| TIK mpStpVlanTimeSinceTopologyChange | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.4 | TimeTicks | read-only | The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity. |
| CTR mpStpVlanTopChanges | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.5 | Counter | read-only | The total number of topology changes detected by this bridge since the management entity was last reset or initialized. |
| BRI mpStpVlanDesignatedRoot | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.6 | BridgeId | read-only | The bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Identifier parameter in all Configuration Bridge PDUs originated by this node. |
| INT mpStpVlanRootCost | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.7 | INTEGER | read-only | The cost of the path to the root as seen from this bridge. |
| INT mpStpVlanRootPort | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.8 | INTEGER | read-only | The port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| TIM mpStpVlanMaxAge | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.9 | Timeout | read-only | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using. |
| TIM mpStpVlanHelloTime | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.10 | Timeout | read-only | The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value that this bridge is currently using. |
| INT mpStpVlanHoldTime | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.11 | INTEGER | read-only | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second. |
| TIM mpStpVlanForwardDelay | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.12 | Timeout | read-only | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to mpStpVlanBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root. |
| TIM mpStpVlanBridgeMaxAge | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.13 | Timeout | read-write | The value that all bridges use for MaxAge when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mpStpVlanBridgeHelloTime. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. |
| TIM mpStpVlanBridgeHelloTime | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.14 | Timeout | read-write | The value that all bridges use for HelloTime when this bridge is acting as the root. The granularity of this timer is specified by 802.1D- 1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds. |
| TIM mpStpVlanBridgeForwardDelay | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.15 | Timeout | read-write | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D-1990 specifies that the range for this parameter is related to the value of mpStpVlanBridgeMaxAge. The granularity of this timer is specified by 802.1D-1990 to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number. |
| INT mpStpVlanSupportStatus | 1.3.6.1.4.1.119.2.3.3.13.21.1.1.16 | INTEGER | read-write | Indicate whether the VLAN supports Spanning Tree Protocol or not. If the value 'support(1)' is set, the VLAN supports Spanning Tree Protocol. If the value 'nonSupport(2)' is set, the VLAN does not support Spanning Tree Protocol. |
| mpStpPortTable | 1.3.6.1.4.1.119.2.3.3.13.21.2 | not-accessible | A table that contains port-specific information for the Spanning Tree Protocol. | |
| mpStpPortEntry | 1.3.6.1.4.1.119.2.3.3.13.21.2.1 | not-accessible | A list of information maintained by every port about the Spanning Tree Protocol state for that port. | |
| INT mpStpPortVlanIndex | 1.3.6.1.4.1.119.2.3.3.13.21.2.1.1 | INTEGER | read-only | The VLAN ID for which this entry contains Spanning Tree Protocol management information. |
| INT mpStpPort | 1.3.6.1.4.1.119.2.3.3.13.21.2.1.2 | INTEGER | read-only | The port number of the port for which this entry contains Spanning Tree Protocol management information. |
| INT mpStpPortPriority | 1.3.6.1.4.1.119.2.3.3.13.21.2.1.3 | INTEGER | read-write | The value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mpStpPort. |
| INT mpStpPortState | 1.3.6.1.4.1.119.2.3.3.13.21.2.1.4 | INTEGER | read-only | The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. For ports which are disabled (see mpStpPortEnable), this object will have a value of disabled(1). |
| INT mpStpPortEnable | 1.3.6.1.4.1.119.2.3.3.13.21.2.1.5 | INTEGER | read-write | The enabled/disabled status of the port. |
| INT mpStpPortPathCost | 1.3.6.1.4.1.119.2.3.3.13.21.2.1.6 | INTEGER | read-write | The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. |
| BRI mpStpPortDesignatedRoot | 1.3.6.1.4.1.119.2.3.3.13.21.2.1.7 | BridgeId | read-only | The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. |
| INT mpStpPortDesignatedCost | 1.3.6.1.4.1.119.2.3.3.13.21.2.1.8 | INTEGER | read-only | The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. |
| BRI mpStpPortDesignatedBridge | 1.3.6.1.4.1.119.2.3.3.13.21.2.1.9 | BridgeId | read-only | The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. |
| OCT mpStpPortDesignatedPort | 1.3.6.1.4.1.119.2.3.3.13.21.2.1.10 | OCTET STRING | read-only | The Port Identifier of the port on the Designated Bridge for this port's segment. |
| CTR mpStpPortForwardTransitions | 1.3.6.1.4.1.119.2.3.3.13.21.2.1.11 | Counter | read-only | The number of times this port has transitioned from the Learning state to the Forwarding state. |
| mpLlc | 1.3.6.1.4.1.119.2.3.3.13.22 | |||
| INT mpLlcSharedVccMaxSduSize | 1.3.6.1.4.1.119.2.3.3.13.22.1 | INTEGER | read-write | Indicates Maximum SDU size for common VCC which is managed by LLC. LLC make a common VCC according to Maximum SDU size set by this MIB object. |
| INT mpLlcAgeOutTime | 1.3.6.1.4.1.119.2.3.3.13.22.2 | INTEGER | read-write | Indicates no communication time which is used to judge age out on LLC/SNAP capsulation VCC aging. The VCC is released when no communication time of sending/receiving data reach this value. |
| mpLlcPvcTable | 1.3.6.1.4.1.119.2.3.3.13.22.3 | not-accessible | A table contains information of a PVC. | |
| mpLlcPvcEntry | 1.3.6.1.4.1.119.2.3.3.13.22.3.1 | not-accessible | A entry indicates a member of PVC information on a ATM interface. | |
| INT mpLlcPvcIdIndex | 1.3.6.1.4.1.119.2.3.3.13.22.3.1.1 | INTEGER | read-only | The value of this object is an index of PVC entry table. The index indicates the Virtual Circuit Identifier (VC ID). |
| INT mpLlcPvcPort | 1.3.6.1.4.1.119.2.3.3.13.22.3.1.2 | INTEGER | read-write | The value of this object identifies an ATM port number. |
| INT mpLlcPvcVpi | 1.3.6.1.4.1.119.2.3.3.13.22.3.1.3 | INTEGER | read-write | The value of this object identifies a VPI. |
| INT mpLlcPvcVci | 1.3.6.1.4.1.119.2.3.3.13.22.3.1.4 | INTEGER | read-write | The vaule of this object identifies a VCI. |
| INT mpLlcPvcSdu | 1.3.6.1.4.1.119.2.3.3.13.22.3.1.5 | INTEGER | read-write | The value of this object identifies a Service Data Unit. |
| INT mpLlcPvcVcPriority | 1.3.6.1.4.1.119.2.3.3.13.22.3.1.6 | INTEGER | read-write | The object indicates a priority on a specified VC when VC is not one in a PVC. |
| INT mpLlcPvcForwardTrafficId | 1.3.6.1.4.1.119.2.3.3.13.22.3.1.7 | INTEGER | read-write | The value of this object identifies a traffic-id for outgoing at a specified ATM port. |
| INT mpLlcPvcBackwardTrafficId | 1.3.6.1.4.1.119.2.3.3.13.22.3.1.8 | INTEGER | read-write | The vaule of this object identifies a traffic-id for incoming at a specified ATM port. |
| INT mpLlcPvcAdminStatus | 1.3.6.1.4.1.119.2.3.3.13.22.3.1.9 | INTEGER | read-write | The value of this object indicates status of a VC. |
| INT mpLlcPvcOperStatus | 1.3.6.1.4.1.119.2.3.3.13.22.3.1.10 | INTEGER | read-write | The object indicates the current operational status of a VC. |
| ROW mpLlcPvcRowStatus | 1.3.6.1.4.1.119.2.3.3.13.22.3.1.11 | RowStatus | read-write | This object is used to create, delete or modify a row in this table. |
| mpOspf | 1.3.6.1.4.1.119.2.3.3.13.23 | |||
| mpOspfGeneral | 1.3.6.1.4.1.119.2.3.3.13.23.1 | |||
| INT mpOspfVersionNumber | 1.3.6.1.4.1.119.2.3.3.13.23.1.1 | INTEGER | read-only | The current version number of the OSPF proto- col is 2. |
| T/F mpOspfTOSSupport | 1.3.6.1.4.1.119.2.3.3.13.23.1.2 | TruthValue | read-only | The router's support for type-of-service rout- ing. |
| INT mpOspfExtLsdbLimit | 1.3.6.1.4.1.119.2.3.3.13.23.1.3 | INTEGER | read-only | The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfExtLsdbLimit, the router enters Overflow- State. The router never holds more than ospfExtLsdbLimit non-default AS-external-LSAs in its database. OspfExtLsdbLimit MUST be set identically in all routers attached to the OSPF backbone and/or any regular OSPF area. (i.e., OSPF stub areas and NSSAs are excluded). |
| INT mpOspfExitOverflowInterval | 1.3.6.1.4.1.119.2.3.3.13.23.1.4 | INTEGER | read-only | The number of seconds that, after entering OverflowState, a router will attempt to leave OverflowState. This allows the router to again originate non-default AS-external-LSAs. When set to 0, the router will not leave Overflow- State until restarted. |
| CTR mpOspfInReceives | 1.3.6.1.4.1.119.2.3.3.13.23.1.5 | Counter | read-only | The total number of received error packets. |
| CTR mpOspfInErrors | 1.3.6.1.4.1.119.2.3.3.13.23.1.6 | Counter | read-only | The number of received error packets. |
| mpOspfGlobalTable | 1.3.6.1.4.1.119.2.3.3.13.23.2 | not-accessible | Information describing the configured parame- ters and cumulative statistics of the router's OSPF process. | |
| mpOspfGlobalEntry | 1.3.6.1.4.1.119.2.3.3.13.23.2.1 | not-accessible | Information describing the configured parame- ters and cumulative statistics of the router's OSPF process. | |
| INT mpOspfGlobalProcessId | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.1 | INTEGER | read-only | The process ID of OSPF. |
| INT mpOspfGlobalMode | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.2 | INTEGER | read-write | Status of OSPF process. |
| IP mpOspfGlobalRouterId | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.3 | IpAddress | read-write | A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses. |
| T/F mpOspfGlobalAreaBdrRtrStatus | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.4 | TruthValue | read-only | A flag to note whether this router is an area border router. |
| T/F mpOspfGlobalASBdrRtrStatus | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.5 | TruthValue | read-write | A flag to note whether this router is config- ured as an Autonomous System border router. |
| INT mpOspfGlobalRFC1583Compatibility | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.6 | INTEGER | read-write | Indicates the whether calculation of AS external route is done with RFC1583 mode or RFC2328 mode. |
| INT mpOspfGlobalDefaultRouteType | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.7 | INTEGER | read-write | Indeicates the timing to advertise default route. |
| INT mpOspfGlobalDefMetric | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.8 | INTEGER | read-write | The external cost of default route to be used when the advertising timing of default route is 'always'. |
| INT mpOspfGlobalDefExternalType | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.9 | INTEGER | read-write | The external type of default route to be used when the advertising timing of default route is 'always'. |
| IP mpOspfGlobalDefAddress | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.10 | IpAddress | read-write | The forwarding address of default route to be used when the advertising timing of default route is 'always'. |
| INT mpOspfGlobalDefTag | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.11 | INTEGER | read-write | The route tag of default route to be used when the advertising timing of default route is 'always'. |
| INT mpOspfGlobalDefProtocol | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.12 | INTEGER | read-write | The routing protocol of routing table which judges the condition of import-list When the advertising timing of default route is 'import-list'. |
| INT mpOspfGlobalDefImportList | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.13 | INTEGER | read-write | The import-list number which judges the condition of import-list When the advertising timing of default route is 'import-list'. |
| INT mpOspfGlobalIntraAreaRoutePriority | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.14 | INTEGER | read-write | The route priority which is used when intra-area route is made in IP routing table. |
| INT mpOspfGlobalInterAreaRoutePriority | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.15 | INTEGER | read-write | The route priority which is used when inter-area route is made in IP routing table. |
| INT mpOspfGlobalExternalRoutePriority | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.16 | INTEGER | read-write | The route priority which is used when AS external route is made in IP routing table. |
| INT mpOspfGlobalMulticastExtensions | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.17 | INTEGER | read-write | A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. Bit 0, if set, indicates that the router can forward IP multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). Bit 1, if set, indicates that the router can forward IP multicast datagrams between OSPF areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IP multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting) and 7 (multicasting everywhere). By default, no mul- ticast forwarding is enabled. |
| T/F mpOspfGlobalDemandExtensions | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.18 | TruthValue | read-write | The router's support for demand routing. |
| GAU mpOspfGlobalRouterLsaCount | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.19 | Gauge | read-only | The number of Router (LS type 1) link-state advertisements in the link-state database. |
| GAU mpOspfGlobalNetworkLsaCount | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.20 | Gauge | read-only | The number of Network (LS type 2) link-state advertisements in the link-state database. |
| GAU mpOspfGlobalSummaryNetworkLsaCount | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.21 | Gauge | read-only | The number of Summary Network (LS type 3) link-state advertisements in the link-state database. |
| GAU mpOspfGlobalSummaryRouterLsaCount | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.22 | Gauge | read-only | The number of Summary Router (LS type 4) link-state advertisements in the link-state database. |
| GAU mpOspfGlobalExternalLsaCount | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.23 | Gauge | read-only | The number of external (LS type 5) link-state advertisements in the link-state database. |
| GAU mpOspfGlobalExternalLsaCksumSum | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.24 | Gauge | read-only | The 32-bit unsigned sum of the LS checksums of the external link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. |
| CTR mpOspfGlobalReceives | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.25 | Counter | read-only | The number of received packets. |
| CTR mpOspfGlobalReceiveBadAuths | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.26 | Counter | read-only | The number of received packets which were discarded for authentication error. |
| CTR mpOspfGlobalReceiveBadPackets | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.27 | Counter | read-only | The number of received packets which were discarded except authentication error. |
| CTR mpOspfGlobalMulticastSends | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.28 | Counter | read-only | The number of multicast sent packets. |
| CTR mpOspfGlobalUnicastSends | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.29 | Counter | read-only | The number of unicast sent packets. |
| CTR mpOspfGlobalSpfRuns | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.30 | Counter | read-only | The number of times of the calculation for shortest path tree. |
| CTR mpOspfGlobalIncSummaryUpdates | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.31 | Counter | read-only | The number of summary incremental updates. |
| CTR mpOspfGlobalIncExternalUpdates | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.32 | Counter | read-only | The number of external incremental updates. |
| CTR mpOspfGlobalLsAgeOutCounts | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.33 | Counter | read-only | The number of LSAs which were reached max age. |
| CTR mpOspfGlobalLsFlushCounts | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.34 | Counter | read-only | The number of LSAs which max age were set up and which was removed forcibly. |
| CTR mpOspfGlobalLsdbAllocs | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.35 | Counter | read-only | The number of LSAs which were allocated. |
| CTR mpOspfGlobalLsdbFrees | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.36 | Counter | read-only | The number of LSAs which were released. |
| CTR mpOspfGlobalBufferAllocFailures | 1.3.6.1.4.1.119.2.3.3.13.23.2.1.37 | Counter | read-only | The number of times that it failed to hunt the buffer for the packet transmission. |
| mpOspfImportListTable | 1.3.6.1.4.1.119.2.3.3.13.23.3 | not-accessible | The table to import routing information from other routing protocol to the OSPF process. | |
| mpOspfImportListEntry | 1.3.6.1.4.1.119.2.3.3.13.23.3.1 | not-accessible | The entry to import routing information from other routing protocol to the OSPF process. | |
| INT mpOspfImportListProcessId | 1.3.6.1.4.1.119.2.3.3.13.23.3.1.1 | INTEGER | read-only | The process ID of OSPF. |
| INT mpOspfImportListProtocol | 1.3.6.1.4.1.119.2.3.3.13.23.3.1.2 | INTEGER | read-only | The protocol of IP routing table. |
| INT mpOspfImportListNumber | 1.3.6.1.4.1.119.2.3.3.13.23.3.1.3 | INTEGER | read-only | The import list number. |
| ROW mpOspfImportListStatus | 1.3.6.1.4.1.119.2.3.3.13.23.3.1.4 | RowStatus | read-write | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. |
| mpOspfNetworkPriorityTable | 1.3.6.1.4.1.119.2.3.3.13.23.4 | not-accessible | The table to specify route priority for each network at making IP routing table. | |
| mpOspfNetworkPriorityEntry | 1.3.6.1.4.1.119.2.3.3.13.23.4.1 | not-accessible | The entry to specify route priority for each network at making IP routing table. | |
| INT mpOspfNetworkPriorityProcessID | 1.3.6.1.4.1.119.2.3.3.13.23.4.1.1 | INTEGER | read-only | The process ID of OSPF. |
| IP mpOspfNetworkPriorityAddress | 1.3.6.1.4.1.119.2.3.3.13.23.4.1.2 | IpAddress | read-only | The network address. |
| IP mpOspfNetworkPriorityMask | 1.3.6.1.4.1.119.2.3.3.13.23.4.1.3 | IpAddress | read-only | The network mask. |
| INT mpOspfNetworkPriorityValue | 1.3.6.1.4.1.119.2.3.3.13.23.4.1.4 | INTEGER | read-write | The route priority. |
| ROW mpOspfNetworkPriorityStatus | 1.3.6.1.4.1.119.2.3.3.13.23.4.1.5 | RowStatus | read-write | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. |
| mpOspfAreaTable | 1.3.6.1.4.1.119.2.3.3.13.23.5 | not-accessible | Information describing the configured parame- ters and cumulative statistics of the router's attached areas. | |
| mpOspfAreaEntry | 1.3.6.1.4.1.119.2.3.3.13.23.5.1 | not-accessible | Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas. | |
| INT mpOspfAreaProcessId | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.1 | INTEGER | read-only | The process ID of OSPF. |
| IP mpOspfAreaId | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.2 | IpAddress | read-only | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| INT mpOspfAreaImportAsExternal | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.3 | INTEGER | read-write | The area's support for importing AS external link- state advertisements. |
| INT mpOspfAreaStubMetric | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.4 | INTEGER | read-write | The metric to be set up to default route which advertises to stub area. |
| INT mpOspfAreaSummary | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.5 | INTEGER | read-write | The variable ospfAreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs. |
| GAU mpOspfAreaConfigIfCount | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.6 | Gauge | read-only | The number of the registered interfaces. |
| GAU mpOspfAreaActiveIfCount | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.7 | Gauge | read-only | The number of the interface during operation. |
| T/F mpOspfAreaTransitCapability | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.8 | TruthValue | read-only | Indicates whether it is the area which active virtual link exists in. |
| GAU mpOspfAreaTransitNetCount | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.9 | Gauge | read-only | The number of reachable transit networks. |
| GAU mpOspfAreaRtrCount | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.10 | Gauge | read-only | The number of reachable routers. |
| GAU mpOspfAreaBdrRtrCount | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.11 | Gauge | read-only | The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass. |
| GAU mpOspfAreaAsBdrRtrCount | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.12 | Gauge | read-only | The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. |
| GAU mpOspfAreaLsaCount | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.13 | Gauge | read-only | The total number of link-state advertisements in this area's link-state database, excluding AS External LSA's. |
| GAU mpOspfAreaLsaCksumSum | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.14 | Gauge | read-only | The 32-bit unsigned sum of the link-state ad- vertisements' LS checksums contained in this area's link-state database. This sum excludes external (LS type 5) link-state advertisements. The sum can be used to determine if there has been a change in a router's link state data- base, and to compare the link-state database of two routers. |
| ROW mpOspfAreaStatus | 1.3.6.1.4.1.119.2.3.3.13.23.5.1.15 | RowStatus | read-write | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. |
| mpOspfLsdbTable | 1.3.6.1.4.1.119.2.3.3.13.23.6 | not-accessible | The OSPF Process's Link State Database. | |
| mpOspfLsdbEntry | 1.3.6.1.4.1.119.2.3.3.13.23.6.1 | not-accessible | A single Link State Advertisement. | |
| INT mpOspfLsdbProcessId | 1.3.6.1.4.1.119.2.3.3.13.23.6.1.1 | INTEGER | read-only | The process ID of OSPF. |
| IP mpOspfLsdbAreaId | 1.3.6.1.4.1.119.2.3.3.13.23.6.1.2 | IpAddress | read-only | The 32 bit identifier of the Area from which the LSA was received. |
| INT mpOspfLsdbType | 1.3.6.1.4.1.119.2.3.3.13.23.6.1.3 | INTEGER | read-only | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| IP mpOspfLsdbLsid | 1.3.6.1.4.1.119.2.3.3.13.23.6.1.4 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| IP mpOspfLsdbRouterId | 1.3.6.1.4.1.119.2.3.3.13.23.6.1.5 | IpAddress | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| INT mpOspfLsdbSequence | 1.3.6.1.4.1.119.2.3.3.13.23.6.1.6 | INTEGER | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| INT mpOspfLsdbAge | 1.3.6.1.4.1.119.2.3.3.13.23.6.1.7 | INTEGER | read-only | This field is the age of the link state adver- tisement in seconds. |
| INT mpOspfLsdbChecksum | 1.3.6.1.4.1.119.2.3.3.13.23.6.1.8 | INTEGER | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. |
| OCT mpOspfLsdbAdvertisement | 1.3.6.1.4.1.119.2.3.3.13.23.6.1.9 | OCTET STRING | read-only | The entire Link State Advertisement, including its header. |
| mpOspfAreaRangeTable | 1.3.6.1.4.1.119.2.3.3.13.23.7 | not-accessible | A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255 | |
| mpOspfAreaRangeEntry | 1.3.6.1.4.1.119.2.3.3.13.23.7.1 | not-accessible | A range if IP addresses specified by an IP address/IP network mask pair. For example, class B address range of X.X.X.X with a network mask of 255.255.0.0 includes all IP addresses from X.X.0.0 to X.X.255.255 | |
| INT mpOspfAreaRangeProcessId | 1.3.6.1.4.1.119.2.3.3.13.23.7.1.1 | INTEGER | read-only | The process ID of OSPF. |
| IP mpOspfAreaRangeAreaId | 1.3.6.1.4.1.119.2.3.3.13.23.7.1.2 | IpAddress | read-only | The Area the Address Range is to be found within. |
| IP mpOspfAreaRangeNet | 1.3.6.1.4.1.119.2.3.3.13.23.7.1.3 | IpAddress | read-only | The IP Address of the Net or Subnet indicated by the range. |
| IP mpOspfAreaRangeMask | 1.3.6.1.4.1.119.2.3.3.13.23.7.1.4 | IpAddress | read-only | The Subnet Mask that pertains to the Net or Subnet. |
| INT mpOspfAreaRangeEffect | 1.3.6.1.4.1.119.2.3.3.13.23.7.1.5 | INTEGER | read-write | Subnets subsumed by ranges either trigger the advertisement of the indicated summary (adver- tiseMatching), or result in the subnet's not being advertised at all outside the area. |
| ROW mpOspfAreaRangeStatus | 1.3.6.1.4.1.119.2.3.3.13.23.7.1.6 | RowStatus | read-write | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. |
| mpOspfHostTable | 1.3.6.1.4.1.119.2.3.3.13.23.8 | not-accessible | The list of Hosts, and their metrics, that the router will advertise as host routes. | |
| mpOspfHostEntry | 1.3.6.1.4.1.119.2.3.3.13.23.8.1 | not-accessible | A metric to be advertised, for a given type of service, when a given host is reachable. | |
| INT mpOspfHostProcessId | 1.3.6.1.4.1.119.2.3.3.13.23.8.1.1 | INTEGER | read-only | The process ID of OSPF. |
| IP mpOspfHostIpAddress | 1.3.6.1.4.1.119.2.3.3.13.23.8.1.2 | IpAddress | read-only | The IP Address of the Host. |
| INT mpOspfHostMetric | 1.3.6.1.4.1.119.2.3.3.13.23.8.1.3 | INTEGER | read-write | The Metric to be advertised. |
| ROW mpOspfHostStatus | 1.3.6.1.4.1.119.2.3.3.13.23.8.1.4 | RowStatus | read-write | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. |
| mpOspfIfTable | 1.3.6.1.4.1.119.2.3.3.13.23.9 | not-accessible | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. | |
| mpOspfIfEntry | 1.3.6.1.4.1.119.2.3.3.13.23.9.1 | not-accessible | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. | |
| INT mpOspfIfProcessId | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.1 | INTEGER | read-only | The process ID of OSPF. |
| INT mpOspfIfIndex | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.2 | INTEGER | read-only | This object specifies ifIndex of interface. |
| IP mpOspfIfIpAddress | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.3 | IpAddress | read-only | The IP address of this OSPF interface. |
| IP mpOspfIfIpMask | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.4 | IpAddress | read-only | The network mask registered in interface. |
| IP mpOspfIfAreaId | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.5 | IpAddress | read-write | A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone. |
| INT mpOspfIfType | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.6 | INTEGER | read-write | The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'. |
| INT mpOspfIfMetric | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.7 | INTEGER | read-write | The metric of this interface. |
| INT mpOspfIfRtrPriority | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.8 | INTEGER | read-write | The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker. |
| INT mpOspfIfTransitDelay | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.9 | INTEGER | read-write | The estimated number of seconds it takes to transmit a link state update packet over this interface. |
| INT mpOspfIfRetransInterval | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.10 | INTEGER | read-write | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. |
| INT mpOspfIfHelloInterval | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.11 | INTEGER | read-write | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network. |
| INT mpOspfIfRtrDeadInterval | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.12 | INTEGER | read-write | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. |
| INT mpOspfIfPollInterval | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.13 | INTEGER | read-write | The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. |
| INT mpOspfIfState | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.14 | INTEGER | read-only | The OSPF Interface State. |
| IP mpOspfIfDesignatedRouter | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.15 | IpAddress | read-only | The IP Address of the Designated Router. |
| IP mpOspfIfBackupDesignatedRouter | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.16 | IpAddress | read-only | The IP Address of the Backup Designated Router. |
| INT mpOspfIfAuthType | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.17 | INTEGER | read-write | The authentication type specified for an in- terface. Additional authentication types may be assigned locally. |
| INT mpOspfIfAuthKeyId | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.18 | INTEGER | read-write | The Key ID to be used when an authentication type is MD5. The value from 1 to 255 are used for key ID. 'Get' is not allowed for this object. The value 0 will be returned as meaningless value when Get-Request is received for this object. |
| OCT mpOspfIfAuthKey | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.19 | OCTET STRING | read-write | The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey always returns an Oc- tet String of length zero. |
| INT mpOspfIfMulticastForwarding | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.20 | INTEGER | read-write | The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effective- ly disables all multicast forwarding. |
| T/F mpOspfIfDemand | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.21 | TruthValue | read-write | Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface. |
| CTR mpOspfIfEvents | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.22 | Counter | read-only | The number of times this OSPF interface has changed its state, or an error has occurred. |
| GAU mpOspfIfNeighbors | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.23 | Gauge | read-only | The number of Neighbors. |
| GAU mpOspfIfAdjacencies | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.24 | Gauge | read-only | The number of adjacent Neighbors. |
| GAU mpOspfIfFullyAdjacencies | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.25 | Gauge | read-only | The number of fully adjacent Neighbors. |
| CTR mpOspfIfLsUpdateFloods | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.26 | Counter | read-only | The number of LS-update floods. |
| CTR mpOspfIfDelayedAckSends | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.27 | Counter | read-only | The number of LS-Ack floods. |
| ROW mpOspfIfStatus | 1.3.6.1.4.1.119.2.3.3.13.23.9.1.28 | RowStatus | read-write | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. |
| mpOspfVirtIfTable | 1.3.6.1.4.1.119.2.3.3.13.23.10 | not-accessible | Information about this router's virtual inter- faces. | |
| mpOspfVirtIfEntry | 1.3.6.1.4.1.119.2.3.3.13.23.10.1 | not-accessible | Information about a single Virtual Interface. | |
| INT mpOspfVirtIfProcessId | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.1 | INTEGER | read-only | The process ID of OSPF. |
| INT mpOspfVirtIfId | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.2 | INTEGER | read-only | Identification which is used to distinguish virtual link. |
| IP mpOspfVirtIfNeighbor | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.3 | IpAddress | read-write | The Router ID of the Virtual Neighbor. |
| IP mpOspfVirtIfAreaId | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.4 | IpAddress | read-write | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
| INT mpOspfVirtIfMetric | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.5 | INTEGER | read-only | The metric until end point router. |
| INT mpOspfVirtIfTransitDelay | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.6 | INTEGER | read-write | The estimated number of seconds it takes to transmit a link- state update packet over this interface. |
| INT mpOspfVirtIfRetransInterval | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.7 | INTEGER | read-write | The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time. |
| INT mpOspfVirtIfHelloInterval | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.8 | INTEGER | read-write | The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. |
| INT mpOspfVirtIfRtrDeadInterval | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.9 | INTEGER | read-write | The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor. |
| INT mpOspfVirtIfState | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.10 | INTEGER | read-only | OSPF virtual interface states. |
| INT mpOspfVirtIfAuthType | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.11 | INTEGER | read-write | The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally. |
| INT mpOspfVirtIfAuthKeyId | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.12 | INTEGER | read-write | The Key ID to be used when an authentication type is MD5. The value from 1 to 255 are used for key ID. 'Get' is not allowed for this object. The value 0 will be returned as meaningless value when Get-Request is received for this object. |
| OCT mpOspfVirtIfAuthKey | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.13 | OCTET STRING | read-write | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. If Authentication Type is md5, the device will left adjust and zero fill to 16 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. When read, mpOspfVirtIfAuthKey always returns a string of length zero. |
| CTR mpOspfVirtIfEvents | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.14 | Counter | read-only | The number of state changes or error events on this Virtual Link. |
| GAU mpOspfVirtIfNeighbors | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.15 | Gauge | read-only | The number of neighbors. |
| GAU mpOspfVirtIfAdjacencies | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.16 | Gauge | read-only | The number of adjacent neighbors. |
| GAU mpOspfVirtIfFullyAdjacencies | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.17 | Gauge | read-only | The number of fully adjacent neighbors. |
| CTR mpOspfVirtIfLsUpdateFloods | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.18 | Counter | read-only | The number of LS-update floods. |
| CTR mpOspfVirtIfDelayedAckSends | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.19 | Counter | read-only | The number of LS-Ack floods. |
| ROW mpOspfVirtIfStatus | 1.3.6.1.4.1.119.2.3.3.13.23.10.1.20 | RowStatus | read-write | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. |
| mpOspfNbrTable | 1.3.6.1.4.1.119.2.3.3.13.23.11 | not-accessible | A table of non-virtual neighbor information. | |
| mpOspfNbrEntry | 1.3.6.1.4.1.119.2.3.3.13.23.11.1 | not-accessible | The information regarding a single neighbor. | |
| INT mpOspfNbrProcessId | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.1 | INTEGER | read-only | The process ID of OSPF. |
| INT mpOspfNbrIfIndex | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.2 | INTEGER | read-only | The ifIndex of interface related to the neighbior. |
| IP mpOspfNbrIpAddress | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.3 | IpAddress | read-only | The IP address this neighbor is using in its IP Source Address. Note that, on addressless links, this will not be 0.0.0.0, but the ad- dress of another of the neighbor's interfaces. |
| IP mpOspfNbrRtrId | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.4 | IpAddress | read-only | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. |
| INT mpOspfNbrOptions | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.5 | INTEGER | read-only | A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders. |
| INT mpOspfNbrPriority | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.6 | INTEGER | read-write | The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network. |
| INT mpOspfNbrCost | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.7 | INTEGER | read-write | The metric to the neighbor which is used for Point-to-MultiPoint network. |
| INT mpOspfNbrState | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.8 | INTEGER | read-only | The State of the relationship with this Neighbor. |
| INT mpOspfNbrPermanence | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.9 | INTEGER | read-only | This variable displays the status of the en- try. 'dynamic' and 'permanent' refer to how the neighbor became known. |
| T/F mpOspfNbrHelloSuppressed | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.10 | TruthValue | read-only | Indicates whether Hellos are being suppressed to the neighbor. |
| IP mpOspfNbrSelectedDr | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.11 | IpAddress | read-only | The designated router which neighbor selects. |
| IP mpOspfNbrSelectedBdr | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.12 | IpAddress | read-only | The backup designated router which neighbor selects. |
| GAU mpOspfNbrLsSummaryListLen | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.13 | Gauge | read-only | The current length of the LS-summary queue. |
| GAU mpOspfNbrLsRetransQLen | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.14 | Gauge | read-only | The current length of the retransmission queue. |
| GAU mpOspfNbrLsReqListLen | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.15 | Gauge | read-only | The current length of the LS-request queue. |
| CTR mpOspfNbrLsUpdateRetrans | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.16 | Counter | read-only | The number of times of LS-update re-transmission. |
| CTR mpOspfNbrDirectAckSends | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.17 | Counter | read-only | The number of times of LS-Ack Unicast transmission. |
| CTR mpOspfNbrDupUpdateReceives | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.18 | Counter | read-only | The number of times that overlapped LSA was received. |
| CTR mpOspfNbrOldUpdateReceives | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.19 | Counter | read-only | The number of times that old LSA was received. |
| CTR mpOspfNbrDupAckReceives | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.20 | Counter | read-only | The number of times that overlapped LS-Ack was received. |
| CTR mpOspfNbrLosses | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.21 | Counter | read-only | The number of times that Neighbor down was recognized. |
| CTR mpOspfNbrAdjacencyResets | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.22 | Counter | read-only | The number of times that Adjacency was reset. |
| ROW mpOspfNbrStatus | 1.3.6.1.4.1.119.2.3.3.13.23.11.1.23 | RowStatus | read-write | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. |
| mpOspfVirtNbrTable | 1.3.6.1.4.1.119.2.3.3.13.23.12 | not-accessible | A table of virtual neighbor information. | |
| mpOspfVirtNbrEntry | 1.3.6.1.4.1.119.2.3.3.13.23.12.1 | not-accessible | Virtual neighbor information. | |
| INT mpOspfVirtNbrProcessId | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.1 | INTEGER | read-only | The process ID of OSPF. |
| INT mpOspfVirtNbrIfId | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.2 | INTEGER | read-only | The ifIndex of Interface which transmits packet to Neighbor. |
| IP mpOspfVirtNbrAreaId | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.3 | IpAddress | read-only | The Transit Area Identifier. |
| IP mpOspfVirtNbrRtrId | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.4 | IpAddress | read-only | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. |
| IP mpOspfVirtNbrIpAddress | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.5 | IpAddress | read-only | The IP address this Virtual Neighbor is us- ing. |
| INT mpOspfVirtNbrOptions | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.6 | INTEGER | read-only | A Bit Mask corresponding to the neighbor's op- tions field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; ie, that it imple- ments OSPF Multicast Routing. |
| INT mpOspfVirtNbrState | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.7 | INTEGER | read-only | The state of the Virtual Neighbor Relation- ship. |
| T/F mpOspfVirtNbrHelloSuppressed | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.8 | TruthValue | read-only | Indicates whether Hellos are being suppressed to the neighbor |
| GAU mpOspfVirtNbrLsSummaryListLen | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.9 | Gauge | read-only | The current length of the LS-summary queue. |
| GAU mpOspfVirtNbrLsRetransQLen | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.10 | Gauge | read-only | The current length of the retransmission queue. |
| GAU mpOspfVirtNbrLsReqListLen | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.11 | Gauge | read-only | The current length of the LS-request queue. |
| CTR mpOspfVirtNbrLsUpdateRetrans | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.12 | Counter | read-only | The number of times of LS-update re-transmission. |
| CTR mpOspfVirtNbrDirectAckSends | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.13 | Counter | read-only | The number of times of LS-Ack unicast transmission. |
| CTR mpOspfVirtNbrDupUpdateReceives | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.14 | Counter | read-only | The number of times that overlapped LSA was received. |
| CTR mpOspfVirtNbrOldUpdateReceives | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.15 | Counter | read-only | The number of times that old LSA was received. |
| CTR mpOspfVirtNbrDupAckReceives | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.16 | Counter | read-only | The number of times that overlapped LS-Ack was received. |
| CTR mpOspfVirtNbrLosses | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.17 | Counter | read-only | The number of times that Neighbor down was recognized. |
| CTR mpOspfVirtNbrAdjacencyResets | 1.3.6.1.4.1.119.2.3.3.13.23.12.1.18 | Counter | read-only | The number of times that Adjacency was reset. |
| mpOspfExtLsdbTable | 1.3.6.1.4.1.119.2.3.3.13.23.13 | not-accessible | The OSPF Process's Links State Database. | |
| mpOspfExtLsdbEntry | 1.3.6.1.4.1.119.2.3.3.13.23.13.1 | not-accessible | A single Link State Advertisement. | |
| INT mpOspfExtLsdbProcessId | 1.3.6.1.4.1.119.2.3.3.13.23.13.1.1 | INTEGER | read-only | The process ID of OSPF. |
| IP mpOspfExtLsdbLsid | 1.3.6.1.4.1.119.2.3.3.13.23.13.1.2 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| IP mpOspfExtLsdbRouterId | 1.3.6.1.4.1.119.2.3.3.13.23.13.1.3 | IpAddress | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| INT mpOspfExtLsdbType | 1.3.6.1.4.1.119.2.3.3.13.23.13.1.4 | INTEGER | read-only | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| INT mpOspfExtLsdbSequence | 1.3.6.1.4.1.119.2.3.3.13.23.13.1.5 | INTEGER | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| INT mpOspfExtLsdbAge | 1.3.6.1.4.1.119.2.3.3.13.23.13.1.6 | INTEGER | read-only | This field is the age of the link state adver- tisement in seconds. |
| INT mpOspfExtLsdbChecksum | 1.3.6.1.4.1.119.2.3.3.13.23.13.1.7 | INTEGER | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. |
| OCT mpOspfExtLsdbAdvertisement | 1.3.6.1.4.1.119.2.3.3.13.23.13.1.8 | OCTET STRING | read-only | The entire Link State Advertisement, including its header. |
| mpObsCtl | 1.3.6.1.4.1.119.2.3.3.13.101 | |||
| mpCardInfo | 1.3.6.1.4.1.119.2.3.3.13.102 | |||
| mpInterface | 1.3.6.1.4.1.119.2.3.3.13.103 | |||
| mpPvoice | 1.3.6.1.4.1.119.2.3.3.13.104 | |||
| mpAtmCallCtl | 1.3.6.1.4.1.119.2.3.3.13.110 | |||
| mpCes | 1.3.6.1.4.1.119.2.3.3.13.111 | |||
| mpIpsw | 1.3.6.1.4.1.119.2.3.3.13.112 | |||
| mpInsCtl | 1.3.6.1.4.1.119.2.3.3.13.113 | |||
| mpFfr | 1.3.6.1.4.1.119.2.3.3.13.114 | |||
| mpIpswAtm | 1.3.6.1.4.1.119.2.3.3.13.115 | |||
| mpPpp | 1.3.6.1.4.1.119.2.3.3.13.120 | |||
| mpPos | 1.3.6.1.4.1.119.2.3.3.13.121 | |||
| mpFrpp | 1.3.6.1.4.1.119.2.3.3.13.123 | |||
| mpMpls | 1.3.6.1.4.1.119.2.3.3.13.124 | |||
| mpMcc | 1.3.6.1.4.1.119.2.3.3.13.125 | |||
| mpDetour | 1.3.6.1.4.1.119.2.3.3.13.130 | |||
| mpIpv6 | 1.3.6.1.4.1.119.2.3.3.13.131 | |||
| mpNetwatch | 1.3.6.1.4.1.119.2.3.3.13.132 | |||
| mpNetping | 1.3.6.1.4.1.119.2.3.3.13.133 |
RFC description
NEC MultiMedia Platform private MIB for managing proprietary multimedia platform components and configurations.
Start monitoring Device type unconfirmed from available data (vendor unspecified) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.