MMPF-MIB :: mpIpStaticRouteType

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › MMPF-MIB › mpIpStaticRouteType

mpIpStaticRouteType

Module: MMPF-MIB

OID (symbolic): MMPF-MIB::mpIpStaticRouteType

OID (numeric): 1.3.6.1.4.1.119.2.3.3.13.11.7.1.5

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: This object specifies the route type. The route type other(1) is not reflected to IP routing table. The route type reject(2) is used to discard corresponding IP packet.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.119.2.3.3.13.11.7.1.5
snmpwalk -v2c -c public <target> MMPF-MIB::mpIpStaticRouteType

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.119.2.3.3.13.11.7.1.5.1
snmpget -v2c -c public <target> MMPF-MIB::mpIpStaticRouteType.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.119.2.3.3.13.11.7.1.5.1 i <value>

Start monitoring Device type unconfirmed from available data (vendor unspecified) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the MMPF-MIB::mpIpStaticRouteType OID value, configure state conditions and alerts, and monitor any Device type unconfirmed from available data (vendor unspecified) from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.119necA100-R1-MIB
1.3.6.1.4.1.119.2nec_mibA100-R1-MIB
1.3.6.1.4.1.119.2.3necProductDependA100-R1-MIB
Numeric OIDNameModule
1.3.6.1.4.1.119.2.3.3datax_mibMMPF-MIB
1.3.6.1.4.1.119.2.3.3.13mmpf_mibMMPF-MIB
1.3.6.1.4.1.119.2.3.3.13.11mpIpMMPF-MIB
1.3.6.1.4.1.119.2.3.3.13.11.7mpIpStaticRouteTableMMPF-MIB
1.3.6.1.4.1.119.2.3.3.13.11.7.1mpIpStaticRouteEntryMMPF-MIB
1.3.6.1.4.1.119.2.3.3.13.11.7.1.5mpIpStaticRouteTypeMMPF-MIB