MIMOSA-NETWORKS-PTMP-MIB

All MIBs › MIMOSA-NETWORKS-PTMP-MIB

Organization: Mimosa Networks

Last Updated: 2017-04-05

Category: Wireless/WiFi

Description: Manages Mimosa Networks point-to-multipoint access point and client station parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is MIMOSA-NETWORKS-PTMP-MIB?

MIMOSA-NETWORKS-PTMP-MIB is a vendor-specific module for Mimosa Networks' point-to-multipoint (PTMP) fixed-wireless broadband products, used to link a central access point to multiple subscriber client radios. It exposes SSID/wireless configuration (enable, broadcast, isolation), radio mode and role settings, and link/RF performance data. Monitoring emphasis is on radio hardware and link status: channel power and link information reveal RF signal quality and degradation, while SSID enabled/broadcast/isolation flags and wireless mode/gender show whether the radio's configuration matches its intended role. It is a proprietary Mimosa MIB and does not appear to reference other standard MIBs directly, though it would typically be polled alongside standard interface MIBs for the same device. Typical deployment is wireless ISPs (WISPs) and fixed-wireless access networks using Mimosa PTMP base stations and subscriber modules. Network engineers evaluating or troubleshooting this functionality can download the MIMOSA-NETWORKS-PTMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in MIMOSA-NETWORKS-PTMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Mimosa Networks PTMP access point
Mimosa PTMP subscriber/client radio

Monitoring Examples

An admin polls mimosaPtmpChannelPower and mimosaPtmpLinkInfo for each mimosaPtmpSsidEntry (indexed by mimosaPtmpSsidIndex) to catch a subscriber link whose RF signal has degraded. mimosaPtmpWirelessMode, mimosaPtmpWirelessGender, and mimosaPtmpWirelessTrafficSplit indicate whether a radio is configured as access point or client and how traffic is split, while mimosaPtmpSsidEnabled/mimosaPtmpSsidBroadcastEnabled/mimosaPtmpSsidIsolationEnabled confirm the SSID's configured state hasn't drifted.

What Can Be Monitored

SSID enabled/broadcast/isolation status
wireless mode and traffic split
channel power
link info/signal quality
wireless gender (AP/client role)

Imported Objects

From MIMOSA-MIB-TC

DecimalOne
DecimalTwo
Mimosa5GHzChannelNumber
Mimosa5GHzFrequency

From MIMOSA-NETWORKS-BASE-MIB

mimosaConformanceGroup	OBJECT-IDENTITY
mimosaWireless	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using mimosaPtmpApStatsRxBytes OID:

Select a Mimosa Networks PTMP access point/subscriber radio as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type mimosaPtmpApStatsRxBytes into the Find box to locate it in the OID tree, then select it and click OK. Describes the number of bytes received by the AP in single-User mode. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
mimosaPtmp	1.3.6.1.4.1.43356.2.1.2.9			The MIB module for Mimosa PTMP products
mimosaPtmpSsid	1.3.6.1.4.1.43356.2.1.2.9.1
mimosaPtmpSsidTable	1.3.6.1.4.1.43356.2.1.2.9.1.1		not-accessible	A list of A5 SSID entries
mimosaPtmpSsidEntry	1.3.6.1.4.1.43356.2.1.2.9.1.1.1		not-accessible	Entry that describes each SSID and all its related configuration
I32 mimosaPtmpSsidIndex	1.3.6.1.4.1.43356.2.1.2.9.1.1.1.1	Integer32	not-accessible	Describes the index used to access a particular entry in the SSID table.
STR mimosaPtmpSsidName	1.3.6.1.4.1.43356.2.1.2.9.1.1.1.2	DisplayString	read-only	Describes the name of the SSID
INT mimosaPtmpSsidType	1.3.6.1.4.1.43356.2.1.2.9.1.1.1.3	INTEGER	read-only	Describes the type of clients that will connect to this SSID. CPE represents fixed, or Hotspot represents mobile devices
T/F mimosaPtmpSsidEnabled	1.3.6.1.4.1.43356.2.1.2.9.1.1.1.4	TruthValue	read-only	Describes if the SSID is enabled (True) or disabled (False)
T/F mimosaPtmpSsidBroadcastEnabled	1.3.6.1.4.1.43356.2.1.2.9.1.1.1.5	TruthValue	read-only	Describes if the Broadcast feature for this SSID is enabled or disabled
T/F mimosaPtmpSsidIsolationEnabled	1.3.6.1.4.1.43356.2.1.2.9.1.1.1.6	TruthValue	read-only	Describes if the client isolation is enabled or disabled
mimosaPtmpLinkInfo	1.3.6.1.4.1.43356.2.1.2.9.2
INT mimosaPtmpWirelessMode	1.3.6.1.4.1.43356.2.1.2.9.2.1	INTEGER	read-only	Describes the wireless protocol configured on the Mimosa Device
INT mimosaPtmpWirelessGender	1.3.6.1.4.1.43356.2.1.2.9.2.2	INTEGER	read-only	Describes the wireless protocol gender that defines the transmit and receive timing
STR mimosaPtmpWirelessTrafficSplit	1.3.6.1.4.1.43356.2.1.2.9.2.3	DisplayString	read-only	Describes how the bandwidth is split between the AP and Station
I32 mimosaPtmpWirelessWindowLength	1.3.6.1.4.1.43356.2.1.2.9.2.4	Integer32	read-only	Describes the length of the transmit time slot in milliseconds
mimosaPtmpChannelPower	1.3.6.1.4.1.43356.2.1.2.9.3
T/F mimosaPtmpAutoChannelEnabled	1.3.6.1.4.1.43356.2.1.2.9.3.1	TruthValue	read-only	Describes if the Auto Channel feature is Enabled or Disabled. This function selects the channel that results in the best RF performance.
U32 mimosaPtmpAntennaGain	1.3.6.1.4.1.43356.2.1.2.9.3.2	Unsigned32	read-only	Describes the antenna gain for connectorized version of the device. Measured in dBi.
mimosaPtmpChannelPowerTable	1.3.6.1.4.1.43356.2.1.2.9.3.3		not-accessible	A list of Channel and Power related information per radio.
mimosaPtmpChannelPowerEntry	1.3.6.1.4.1.43356.2.1.2.9.3.3.1		not-accessible	An entry containing channel and power information
U32 mimosaPtmpChPwrRadioIndex	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.1	Unsigned32	not-accessible	Describes the index of the radio.
STR mimosaPtmpChPwrRadioName	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.2	DisplayString	read-only	Describes the name of the radio.
MIM mimosaPtmpChPwrCntrFreqCfg	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.3	Mimosa5GHzFrequency	read-only	Describes the configured center frequency of the channel used on the access point. The center frequency represents the absolute center of the selected channel width without any offset. Measured in MHz
MIM mimosaPtmpChPwrPrimChannelCfg	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.4	Mimosa5GHzChannelNumber	read-only	Describes the primary channel number that corresponds with the operating frequency.
U32 mimosaPtmpChPwrChWidthCfg	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.5	Unsigned32	read-only	Describes the channel width for access point operation: 20 MHz, 40 MHz or 80 MHz
I32 mimosaPtmpChPwrTxPowerCfg	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.6	Integer32	read-only	Describes the desired transmit power level. The allowed options are determined by a combination of country and chosen frequency. Measured in dBm
MIM mimosaPtmpChPwrCntrFreqCur	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.7	Mimosa5GHzFrequency	read-only	Describes the current center frequency of the channel used on the access point. The center frequency represents the absolute center of the selected channel width without any offset. Measured in MHz
MIM mimosaPtmpChPwrPrimChannelCur	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.8	Mimosa5GHzChannelNumber	read-only	Describes the current primary channel number that corresponds with the operating frequency.
U32 mimosaPtmpChPwrChWidthCur	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.9	Unsigned32	read-only	Describes the current channel width for access point operation: 20 MHz, 40 MHz or 80 MHz
I32 mimosaPtmpChPwrTxPowerCur	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.10	Integer32	read-only	Describes the current transmit power level. The allowed options are determined by a combination of country and chosen frequency. Measured in dBm
INT mimosaPtmpChPwrAgcMode	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.11	INTEGER	read-only	Describes the setting for Automatic Gain Control (AGC) feature, which is used to set the signal level below which the radio ignores incoming RF interference. The choices are Off or Manual
I32 mimosaPtmpChPwrMinRxPower	1.3.6.1.4.1.43356.2.1.2.9.3.3.1.12	Integer32	read-only	Describes the Rx power level (in manual AGC Mode) below your expected signal, but above other interference, measured in dBm
mimosaPtmpChannelExclusionTable	1.3.6.1.4.1.43356.2.1.2.9.3.4		not-accessible	A list of Exclusions and Restrictions
mimosaPtmpChannelExclusionEntry	1.3.6.1.4.1.43356.2.1.2.9.3.4.1		not-accessible	Entry that describes each SSID and all its related configuration
I32 mimosaPtmpChannelExclusionIndex	1.3.6.1.4.1.43356.2.1.2.9.3.4.1.1	Integer32	not-accessible	Describes the index used to access a particular entry in the Exclusion list table.
I32 mimosaPtmpChannelExclusionStart	1.3.6.1.4.1.43356.2.1.2.9.3.4.1.2	Integer32	read-only	Describes the lower limit for the exclusion range, not including this frequency
I32 mimosaPtmpChannelExclusionEnd	1.3.6.1.4.1.43356.2.1.2.9.3.4.1.3	Integer32	read-only	Describes the upper limit for the exclusion range, not including this frequency.
mimosaPtmpApStats	1.3.6.1.4.1.43356.2.1.2.9.4
C64 mimosaPtmpApStatsRxBytesEx	1.3.6.1.4.1.43356.2.1.2.9.4.1	Counter64	read-only	Describes the number of bytes received by the AP in single-User mode
C64 mimosaPtmpApStatsTxBytes	1.3.6.1.4.1.43356.2.1.2.9.4.2	Counter64	read-only	Describes the number of bytes transmitted by the AP in single-user mode
C64 mimosaPtmpApStatsRxPkts	1.3.6.1.4.1.43356.2.1.2.9.4.3	Counter64	read-only	Describes the number of packets received by the AP in single-user mode
C64 mimosaPtmpApStatsTxPkts	1.3.6.1.4.1.43356.2.1.2.9.4.4	Counter64	read-only	Describes the number of packets transmitted by the AP in single-user mode
I32 mimosaPtmpApStatsTxPer	1.3.6.1.4.1.43356.2.1.2.9.4.5	Integer32	read-only	Describes the packet error rate on the transmit path of the AP, in single-user mode
TIM mimosaPtmpApStatsLastUpdated	1.3.6.1.4.1.43356.2.1.2.9.4.6	TimeStamp	read-only	Describes the last updated time for these statistics
mimosaPtmpClientInfo	1.3.6.1.4.1.43356.2.1.2.9.5
mimosaPtmpClientInfoTable	1.3.6.1.4.1.43356.2.1.2.9.5.1		not-accessible	A list of all the associated clients and related information of each of them.
mimosaPtmpClientInfoEntry	1.3.6.1.4.1.43356.2.1.2.9.5.1.1		not-accessible	Entry that describes each client and related configuration and statistics.
U32 mimosaPtmpClientInfoIndex	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.1	Unsigned32	not-accessible	Describes the index used to access a particular entry in the Client Traffic Shaping Information table.
MAC mimosaPtmpClientInfoMacAddress	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.2	MacAddress	read-only	Describes the MAC address of the client associated to this access- point.
STR mimosaPtmpClientName	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.3	DisplayString	read-only	Describes the name associated with this client.
STR mimosaPtmpClientFWVersion	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.4	DisplayString	read-only	Describes the firmware version of this client. This is supported only if the client is a Mimosa device.
IP mimosaPtmpClientIPAddress	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.5	IpAddress	read-only	Describes the IP Address associated with this client.
TIM mimosaPtmpClientAssociatedTime	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.6	TimeStamp	read-only	Describes how long the client is associated with this access-point.
STR mimosaPtmpClientPlanName	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.7	DisplayString	read-only	Describes the Traffic Shaping plan associated with this client.
U32 mimosaPtmpClientUlCommitted	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.8	Unsigned32	read-only	Describes the Uplink Committed Rate configured for the client.
U32 mimosaPtmpClientUlPeak	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.9	Unsigned32	read-only	Describes the Uplink Peak Rate configured for the client.
U32 mimosaPtmpClientDlCommitted	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.10	Unsigned32	read-only	Describes the Downlink Committed Rate configured for the client.
U32 mimosaPtmpClientDlPeak	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.11	Unsigned32	read-only	Describes the Downlink Peak Rate configured for the client.
TIM mimosaPtmpClientInfoLastUpdated	1.3.6.1.4.1.43356.2.1.2.9.5.1.1.12	TimeStamp	read-only	Describes the last updated time of this information for the Client.
mimosaPtmpClientStats	1.3.6.1.4.1.43356.2.1.2.9.6
mimosaPtmpClientStatsTable	1.3.6.1.4.1.43356.2.1.2.9.6.1		not-accessible	A list of all the associated clients and related information of each of them.
mimosaPtmpClientStatsEntry	1.3.6.1.4.1.43356.2.1.2.9.6.1.1		not-accessible	Entry that describes each client all its related configuration and statistics.
U32 mimosaPtmpClientStatsIndex	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.1	Unsigned32	not-accessible	Describes the index used to access a particular entry in the Client Information table.
MAC mimosaPtmpClientStatsMacAddress	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.2	MacAddress	read-only	Describes the MAC address of the client associated to this access- point.
U32 mimosaPtmpClientAssocBW	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.3	Unsigned32	read-only	Describes the associated bandwidth of the client.
C64 mimosaPtmpClientRxBytes	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.4	Counter64	read-only	Describes the number of bytes received from this client.
C64 mimosaPtmpClientTxBytes	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.5	Counter64	read-only	Describes the number of bytes transmitted to this client.
C64 mimosaPtmpClientRxPkts	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.6	Counter64	read-only	Describes the number of packets received from this client.
C64 mimosaPtmpClientTxPkts	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.7	Counter64	read-only	Describes the number of packets transmitted to this client.
U32 mimosaPtmpClientRxPhyRate	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.8	Unsigned32	read-only	Describes the receive rate of this client.
U32 mimosaPtmpClientTxPhyRate	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.9	Unsigned32	read-only	Describes the transmit rate of this client.
DEC mimosaPtmpClientTxAvgPer	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.10	DecimalTwo	read-only	Describes the average packet error rate on the transmit side for this client.
DEC mimosaPtmpClientRssiAvg	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.11	DecimalOne	read-only	Describes the average RSSI for this Client.
TIM mimosaPtmpClientStatsLastUpdated	1.3.6.1.4.1.43356.2.1.2.9.6.1.1.12	TimeStamp	read-only	Describes the last updated time of this information for the Client.
mimosaPtmpMgmtInfo	1.3.6.1.4.1.43356.2.1.2.9.7
IP mimosaPtmpMgmtIpAddress	1.3.6.1.4.1.43356.2.1.2.9.7.1	IpAddress	read-only	Describes the IP Address configured on the Mimosa Device
IP mimosaPtmpMgmtIpNetmask	1.3.6.1.4.1.43356.2.1.2.9.7.2	IpAddress	read-only	Describes the IP netmask configured on the Mimosa Device
IP mimosaPtmpMgmtIpGateway	1.3.6.1.4.1.43356.2.1.2.9.7.3	IpAddress	read-only	Describes the IP Address of the Gateway configured on the Mimosa Device
STR mimosaPtmpMgmtIpMode	1.3.6.1.4.1.43356.2.1.2.9.7.4	DisplayString	read-only	Describes the IP Address assignment mode configured on the Mimosa Device
IP mimosaPtmpMgmtPrimaryDNS	1.3.6.1.4.1.43356.2.1.2.9.7.5	IpAddress	read-only	Describes the IP Address of the Primary DNS server configured on the Mimosa Device
IP mimosaPtmpMgmtSecondaryDNS	1.3.6.1.4.1.43356.2.1.2.9.7.6	IpAddress	read-only	Describes the IP Address of the Secondary DNS server configured on the Mimosa Device
INT mimosaPtmpMgmtVlanStatus	1.3.6.1.4.1.43356.2.1.2.9.7.7	INTEGER	read-only	Describes the status of management vlan configured on the Mimosa Device
I32 mimosaPtmpMgmtVlanId	1.3.6.1.4.1.43356.2.1.2.9.7.8	Integer32	read-only	Describes the management vlan-id configured on the Mimosa Device
INT mimosaPtmpMgmtVlanPassthrough	1.3.6.1.4.1.43356.2.1.2.9.7.9	INTEGER	read-only	Describes the status of the vlan passthrough configured on the Mimosa Device
MAC mimosaPtmpMgmtEthernetMac	1.3.6.1.4.1.43356.2.1.2.9.7.10	MacAddress	read-only	Describes the Ethernet MAC address configured on the Mimosa Device
mimosaPtmpConformance	1.3.6.1.4.1.43356.2.4.2
mimosaPtmpCompliances	1.3.6.1.4.1.43356.2.4.2.1
mimosaPtmpCompliance	1.3.6.1.4.1.43356.2.4.2.1.1			The compliance statement for PTMP supported Access Points that implement this MIB.
mimosaPtmpGroups	1.3.6.1.4.1.43356.2.4.2.2
mimosaPtmpSsidGroup	1.3.6.1.4.1.43356.2.4.2.2.1			A collection of objects for the SSID Table.
mimosaPtmpLinkInfoGroup	1.3.6.1.4.1.43356.2.4.2.2.2			A collection of objects for the wireless link objects.
mimosaPtmpChannelPowerGroup	1.3.6.1.4.1.43356.2.4.2.2.3			A collection of objects for the wireless channel and power settings.
mimosaPtmpApStatsGroup	1.3.6.1.4.1.43356.2.4.2.2.4			A collection of objects describing the AP related statistics.
mimosaPtmpClientInfoGroup	1.3.6.1.4.1.43356.2.4.2.2.5			A collection of objects describing the client details.
mimosaPtmpClientStatsGroup	1.3.6.1.4.1.43356.2.4.2.2.6			A collection of objects describing the client statistics.
mimosaPtmpMgmtInfoGroup	1.3.6.1.4.1.43356.2.4.2.2.7			A collection of objects describing the client details.

RFC description

Mimosa Networks point-to-multipoint wireless MIB defining radio link information and SSID parameters.

Start monitoring Mimosa Networks PTMP access point/subscriber radio with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download MIMOSA-NETWORKS-PTMP-MIB