ME1200-IPMC-SNOOPING-MIB

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › ME1200-IPMC-SNOOPING-MIB

Organization: Cisco Systems, Inc

Last Updated: 2014-02-11

Category: Technology: Multicast, Vendor: Cisco

Description: Cisco ME1200 Metro Ethernet switch MIB providing IGMP and MLD snooping configuration and group membership objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ME1200-IPMC-SNOOPING-MIB?

ME1200-IPMC-SNOOPING-MIB is a private Cisco MIB for the ME1200 Metro Ethernet Access Device, covering IP Multicast (IPMC) snooping configuration for IGMP and MLD on the switch. It exposes global and per-port multicast-snooping state: admin state, unregistered-flood behavior, SSM address range, IGMP proxy/leave-proxy settings, and per-port router-port, fast-leave, and throttling parameters. It is used to monitor and verify the software-level multicast-forwarding configuration of the switch -- confirming IGMP snooping is enabled, which ports are treated as multicast router ports, and per-port join/leave throttling limits -- rather than physical hardware health. It is a private adaptation of the standard IPMC snooping MIB model, closely following IETF/Cisco multicast-snooping MIB conventions. It is typically deployed in metro Ethernet access/aggregation networks where the ME1200 handles IPTV or multicast video distribution and operators must monitor group membership and snooping settings per port. Network engineers evaluating or troubleshooting this functionality can download the ME1200-IPMC-SNOOPING-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-IPMC-SNOOPING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Cisco ME1200 Metro Ethernet Access Device

Monitoring Examples

An admin could poll me1200IpmcSnoopingIgmpGlobalsAdminState to confirm IGMP snooping is enabled network-wide, then walk me1200IpmcSnoopingIgmpPortTable/me1200IpmcSnoopingIgmpPortEntry to check per-port settings such as me1200IpmcSnoopingIgmpPortAsRouterPort and me1200IpmcSnoopingIgmpPortDoFastLeave. A drop in multicast delivery on a port could be diagnosed via me1200IpmcSnoopingIgmpPortThrottlingNumber, which may be suppressing new group joins, or by checking me1200IpmcSnoopingIgmpGlobalsSsmRangeAddress/Mask against the expected SSM range.

What Can Be Monitored

  • IGMP snooping admin state
  • per-port router port designation
  • fast-leave setting per port
  • port join throttling limit
  • SSM address range configuration
  • IGMP proxy/leave-proxy state
Imported Objects

From CISCOME1200-MIB

me1200SwitchMgmtOBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddressIPv6

From ME1200-TC

ME1200DisplayString
ME1200InterfaceIndex
ME1200PortListStackable
ME1200RowEditorState
ME1200Unsigned8

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue
OIDs

RFC description

Cisco ME1200 IPMC snooping configuration for IGMP monitoring with group filtering and router port tracking.

Start monitoring Cisco ME1200 Metro Ethernet Access Device (IGMP/MLD snooping) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ME1200-IPMC-SNOOPING-MIB