All MIBs › Intercarrier-SMDS-MIB
Category: Domain: Telco/Transport
Description: Intercarrier SMDS (Switched Multimegabit Data Service) MIB providing SNMP objects for monitoring inter-carrier SMDS connections.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is Intercarrier-SMDS-MIB?
Intercarrier-SMDS-MIB is a vendor-neutral MIB for monitoring Switched Multimegabit Data Service (SMDS) connections between different carriers' networks, a legacy high-speed WAN technology. It covers connection status, addressing, and traffic data for the interconnection points between carrier SMDS networks. Monitoring here centers on interface and connectivity health rather than internal device hardware—link/connection up-down status and traffic/error counters reveal whether an inter-carrier SMDS link is functioning correctly. It likely complements the standard SMDS Interface Protocol MIB (RFC 1304). It was typically deployed in carrier-grade SMDS network equipment and gateways used for older WAN interconnects, a largely obsolete technology today. Engineers implementing or auditing this functionality typically reference the Intercarrier-SMDS-MIB RFC/standard documentation for the authoritative specification.
IPNetwork Monitor allows you to monitor SNMP objects defined in Intercarrier-SMDS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- vendor-neutral, standards-based MIB, not tied to a specific manufacturer
- SMDS carrier interconnect equipment/gateways
Monitoring Examples
No sample object names were supplied for this MIB. Based on its purpose, an admin would expect connection-oriented tables tracking SMDS access-line status and traffic counters between carriers, useful for detecting a dropped inter-carrier SMDS link or an unusual traffic pattern, though exact object names cannot be confirmed without a sample list.
What Can Be Monitored
- SMDS connection status
- inter-carrier traffic counters
- SMDS interface error counts
This MIB depends on
Related MIBs
Imported Objects
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| bellcore | 1.3.6.1.4.1.148 | |||
| requirements | 1.3.6.1.4.1.148.1 | |||
| smdsIomAggAccClEntry | 1.3.6.1.4.1.148.1.4.1.1.1.1 | not-accessible | An entry in the Aggregated Access Class Table | |
| CCO smdsIomAggAccClIcIndex | 1.3.6.1.4.1.148.1.4.1.1.1.1.1 | CCode | read-only | The IC's SMDS CIC |
| smdsIomAggAccClTable | 1.3.6.1.4.1.148.1.4.1.1.1 | not-accessible | The Aggregated Access Class Table | |
| INT smdsIomAggAccClValue | 1.3.6.1.4.1.148.1.4.1.1.1.1.2 | INTEGER | read-only | The value of this object reflects the aggregated access classes in Megabits per second of the end-users who have preselected an IC. |
| smdsIomIciConfigEntry | 1.3.6.1.4.1.148.1.4.1.1.3.1 | not-accessible | An entry in the ICI Configuration Information Table | |
| STR smdsIomIciConfigIciLocation | 1.3.6.1.4.1.148.1.4.1.1.3.1.3 | DisplayString | read-only | The value of this object indicates the location of the LEC SS at which the ICI is terminated. |
| INT smdsIomIciConfigIciMcdus | 1.3.6.1.4.1.148.1.4.1.1.3.1.4 | INTEGER | read-only | The value of this object reflects the maximum data units in transit concurrently. For Phase 1 Exchange Access SMDS, the two acceptable values are: 128 and 511. |
| STR smdsIomIciConfigIciTransPathIdIndex | 1.3.6.1.4.1.148.1.4.1.1.3.1.1 | DisplayString | read-only | The value of this object reflects an identifier assigned to an ICI as part of the provisioning process. |
| INT smdsIomIciConfigIfIndex | 1.3.6.1.4.1.148.1.4.1.1.3.1.2 | INTEGER | read-only | The value of this object identifies the ifIndex associated with the ICIP sublayer of the ICI. |
| smdsIomIciConfigTable | 1.3.6.1.4.1.148.1.4.1.1.3 | not-accessible | This table lists the ICI Transmission Path Identifier, the ICI ifIndex, Location, and MCDUs. | |
| GAU smdsIomIcipL2CurrentBomsEomsDiscards | 1.3.6.1.4.1.148.1.4.1.1.9.1.9 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because the MID of a Beginning of Message (BOM) was currently active or the MID of an EOM was not currently active. |
| GAU smdsIomIcipL2CurrentCellInvalidFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.9.1.4 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because of invalid fields that occurred at the cell sublayer. |
| GAU smdsIomIcipL2CurrentComsEomsDiscards | 1.3.6.1.4.1.148.1.4.1.1.9.1.8 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because the sequence number of the Continuation of Message (COM) or End of Message (EOM) was not incremented by 1 relative to the previous L2_PDU received with the same Message Identifier (MID). |
| GAU smdsIomIcipL2CurrentCongestionDiscards | 1.3.6.1.4.1.148.1.4.1.1.9.1.3 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because an ICI was in congestion. |
| GAU smdsIomIcipL2CurrentCRCViolationsDiscards | 1.3.6.1.4.1.148.1.4.1.1.9.1.7 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because the payload Cyclic Redundancy Check (CRC) was incorrect. |
| smdsIomIcipL2CurrentEntry | 1.3.6.1.4.1.148.1.4.1.1.9.1 | not-accessible | An entry in the ICIP Level 2 Current Table | |
| INT smdsIomIcipL2CurrentIfIndex | 1.3.6.1.4.1.148.1.4.1.1.9.1.1 | INTEGER | read-only | The value of this object identifies the ifIndex associated with the ICIP sublayer of the ICI. |
| GAU smdsIomIcipL2CurrentMRIDiscards | 1.3.6.1.4.1.148.1.4.1.1.9.1.10 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because of MRI Timeout. |
| GAU smdsIomIcipL2CurrentSARIncorrectFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.9.1.6 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because of incorrect fields that occurred at the SAR sublayer. |
| GAU smdsIomIcipL2CurrentSARInvalidFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.9.1.5 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because of invalid fields that occurred at the Segmentation and Reassembly (SAR) sublayer. |
| smdsIomIcipL2CurrentTable | 1.3.6.1.4.1.148.1.4.1.1.9 | not-accessible | The ICIP Level 2 Current Count Table | |
| GAU smdsIomIcipL2CurrentTotalOut | 1.3.6.1.4.1.148.1.4.1.1.9.1.2 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs sent across an ICI. |
| GAU smdsIomIcipL2IntervalBomsEomsDiscards | 1.3.6.1.4.1.148.1.4.1.1.10.1.10 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because the MID of a Beginning of Message (BOM) was currently active or the MID of an EOM was not currently active. |
| GAU smdsIomIcipL2IntervalCellInvalidFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.10.1.5 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because of invalid fields that occurred at the cell sublayer. |
| GAU smdsIomIcipL2IntervalComsEomsDiscards | 1.3.6.1.4.1.148.1.4.1.1.10.1.9 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because the sequence number of the Continuation of Message (COM) or End of Message (EOM) was not incremented by 1 relative to the previous L2_PDU received with the same Message Identifier (MID). |
| GAU smdsIomIcipL2IntervalCongestionDiscards | 1.3.6.1.4.1.148.1.4.1.1.10.1.4 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because an ICI was in congestion. |
| GAU smdsIomIcipL2IntervalCRCViolationsDiscards | 1.3.6.1.4.1.148.1.4.1.1.10.1.8 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because the payload Cyclic Redundancy Check (CRC) was incorrect. |
| smdsIomIcipL2IntervalEntry | 1.3.6.1.4.1.148.1.4.1.1.10.1 | not-accessible | An entry in the ICIP Level 2 Interval Table | |
| INT smdsIomIcipL2IntervalIfIndex | 1.3.6.1.4.1.148.1.4.1.1.10.1.1 | INTEGER | read-only | The value of this object identifies the ifIndex associated with the ICIP sublayer of the ICI. |
| INT smdsIomIcipL2IntervalIntervalIndex | 1.3.6.1.4.1.148.1.4.1.1.10.1.2 | INTEGER | read-only | The value of this object identifies the interval in which the counts occurred. A value of '1' indicates the most recently completed interval while a value of '8' indicates least recently completed interval. |
| GAU smdsIomIcipL2IntervalMRIDiscards | 1.3.6.1.4.1.148.1.4.1.1.10.1.11 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because of MRI Timeout. |
| GAU smdsIomIcipL2IntervalSARIncorrectFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.10.1.7 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because of incorrect fields that occurred at the SAR sublayer. |
| GAU smdsIomIcipL2IntervalSARInvalidFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.10.1.6 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs discarded because of invalid fields that occurred at the Segmentation and Reassembly (SAR) sublayer. |
| smdsIomIcipL2IntervalTable | 1.3.6.1.4.1.148.1.4.1.1.10 | not-accessible | The ICIP Level 2 Interval Table | |
| GAU smdsIomIcipL2IntervalTotalOut | 1.3.6.1.4.1.148.1.4.1.1.10.1.3 | Gauge | read-only | The value of this object reflects the number of ICIP L2_PDUs sent across an ICI. |
| GAU smdsIomIcipL3CurrentBAsizeDiscards | 1.3.6.1.4.1.148.1.4.1.1.7.1.5 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of the BAsize not equaling the Length field. |
| GAU smdsIomIcipL3CurrentCSIncorrectFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.7.1.3 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of incorrect fields that occurred at the convergence sublayer. |
| GAU smdsIomIcipL3CurrentCSInvalidFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.7.1.2 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of invalid fields that occurred at the convergence sublayer. |
| GAU smdsIomIcipL3CurrentCSSInvalidFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.7.1.7 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of invalid fields that occurred at the connectionless service sublayer. |
| GAU smdsIomIcipL3CurrentCSSRoutingErrorsDiscards | 1.3.6.1.4.1.148.1.4.1.1.7.1.8 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of routing errors that occurred at the connectionless service sublayer. |
| smdsIomIcipL3CurrentEntry | 1.3.6.1.4.1.148.1.4.1.1.7.1 | not-accessible | An entry in the ICIP Level 3 Current Table | |
| GAU smdsIomIcipL3CurrentHeaderBEtagDiscards | 1.3.6.1.4.1.148.1.4.1.1.7.1.4 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of the Header BEtag not equaling the Trailer BEtag. |
| INT smdsIomIcipL3CurrentIfIndex | 1.3.6.1.4.1.148.1.4.1.1.7.1.1 | INTEGER | read-only | The value of this object identifies the ifIndex associated with the ICIP sublayer of the ICI. |
| GAU smdsIomIcipL3CurrentLengthFieldDiscards | 1.3.6.1.4.1.148.1.4.1.1.7.1.6 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of the Length field not equaling the number of octets in the portion of the L3_PDU that extends from the Destination Address field up to and including the End-User Data field and Service-Specific Pad. |
| smdsIomIcipL3CurrentTable | 1.3.6.1.4.1.148.1.4.1.1.7 | not-accessible | The ICIP Level 3 Current Table | |
| GAU smdsIomIcipL3IntervalBAsizeDiscards | 1.3.6.1.4.1.148.1.4.1.1.8.1.6 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of the BAsize not equaling the Length field. |
| GAU smdsIomIcipL3IntervalCSIncorrectFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.8.1.4 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of incorrect fields that occurred at the convergence sublayer. |
| GAU smdsIomIcipL3IntervalCSInvalidFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.8.1.3 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of invalid fields that occurred at the convergence sublayer. |
| GAU smdsIomIcipL3IntervalCSSInvalidFieldsDiscards | 1.3.6.1.4.1.148.1.4.1.1.8.1.8 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of invalid fields that occurred at the connectionless service sublayer. |
| GAU smdsIomIcipL3IntervalCSSRoutingErrorsDiscards | 1.3.6.1.4.1.148.1.4.1.1.8.1.9 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of routing errors that occurred at the connectionless service sublayer. |
| smdsIomIcipL3IntervalEntry | 1.3.6.1.4.1.148.1.4.1.1.8.1 | not-accessible | An entry in the ICIP Level 3 Interval Table | |
| GAU smdsIomIcipL3IntervalHeaderBEtagDiscards | 1.3.6.1.4.1.148.1.4.1.1.8.1.5 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of the Header BEtag not equaling the Trailer BEtag. |
| INT smdsIomIcipL3IntervalIfIndex | 1.3.6.1.4.1.148.1.4.1.1.8.1.1 | INTEGER | read-only | The value of this object identifies the ifIndex associated with the ICIP sublayer of the ICI. |
| INT smdsIomIcipL3IntervalIntervalIndex | 1.3.6.1.4.1.148.1.4.1.1.8.1.2 | INTEGER | read-only | The value of this object identifies the interval in which the counts occurred. A value of '1' indicates the most recently completed interval while a value of '8' indicates least recently completed interval. |
| GAU smdsIomIcipL3IntervalLengthFieldDiscards | 1.3.6.1.4.1.148.1.4.1.1.8.1.7 | Gauge | read-only | The value of this object reflects the number of ICIP L3_PDUs discarded because of the Length field not equaling the number of octets in the portion of the L3_PDU that extends from the Destination Address field up to and including the End-User Data field and Service-Specific Pad. |
| smdsIomIcipL3IntervalTable | 1.3.6.1.4.1.148.1.4.1.1.8 | not-accessible | The ICIP Level 3 Interval Table | |
| INT smdsIomIcipPlcpCurrentAlarmState | 1.3.6.1.4.1.148.1.4.1.1.11.1.3 | INTEGER | read-only | The value of this object reflects the alarm state of the ICIP PLCP. The value noAlarm means that there are no alarms present. The value receivedFarEndAlarm means that the DS3 PLCP received an incoming Yellow Signal. The value incomingLOF means that the DS3 PLCP has declared a Loss of Frame (LOF) failure condition. |
| smdsIomIcipPlcpCurrentEntry | 1.3.6.1.4.1.148.1.4.1.1.11.1 | not-accessible | An entry in the ICIP Level 2 Current Table | |
| INT smdsIomIcipPlcpCurrentIfIndex | 1.3.6.1.4.1.148.1.4.1.1.11.1.1 | INTEGER | read-only | The value of this object identifies the ifIndex associated with the ICIP sublayer of the ICI. |
| GAU smdsIomIcipPlcpCurrentSEFS | 1.3.6.1.4.1.148.1.4.1.1.11.1.2 | Gauge | read-only | The value of this object reflects the number of one-second intervals containing one or more Severely Errored Framing (SEF) events. |
| smdsIomIcipPlcpCurrentTable | 1.3.6.1.4.1.148.1.4.1.1.11 | not-accessible | The ICIP PLCP Current Table | |
| GAU smdsIomIcipPlcpCurrentUnavailSeconds | 1.3.6.1.4.1.148.1.4.1.1.11.1.4 | Gauge | read-only | The value of this object reflects the number of seconds during which the PLCP is considered unavailable. |
| smdsIomIcipPlcpIntervalEntry | 1.3.6.1.4.1.148.1.4.1.1.12.1 | not-accessible | An entry in the ICIP PLCP Interval Table | |
| INT smdsIomIcipPlcpIntervalIfIndex | 1.3.6.1.4.1.148.1.4.1.1.12.1.1 | INTEGER | read-only | The value of this object identifies the ifIndex associated with the ICIP sublayer of the ICI. |
| INT smdsIomIcipPlcpIntervalIntervalIndex | 1.3.6.1.4.1.148.1.4.1.1.12.1.2 | INTEGER | read-only | The value of this object identifies the interval in which the counts occurred. A value of '1' indicates the most recently completed interval while a value of '8' indicates least recently completed interval. |
| GAU smdsIomIcipPlcpIntervalSEFS | 1.3.6.1.4.1.148.1.4.1.1.12.1.3 | Gauge | read-only | The value of this object reflects the number of one-second intervals containing one or more Severely Errored Framing (SEF) events. |
| smdsIomIcipPlcpIntervalTable | 1.3.6.1.4.1.148.1.4.1.1.12 | not-accessible | The ICIP PLCP Interval Table | |
| GAU smdsIomIcipPlcpIntervalUnavailSeconds | 1.3.6.1.4.1.148.1.4.1.1.12.1.4 | Gauge | read-only | The value of this object reflects the number of seconds during which the PLCP is considered unavailable. |
| INT smdsIomLecNetAddrAddrType | 1.3.6.1.4.1.148.1.4.1.1.2.1.3 | INTEGER | read-only | The value of this object indicates the type of address reflected in smdsIomLecNetAddrDigits. |
| INT smdsIomLecNetAddrDigits | 1.3.6.1.4.1.148.1.4.1.1.2.1.2 | INTEGER | read-only | The value of this object reflects up to the first six digits following the country code of an SMDS Address served by the LEC's network. |
| smdsIomLecNetAddrEntry | 1.3.6.1.4.1.148.1.4.1.1.2.1 | not-accessible | An entry in the LEC Network Address Table | |
| INT smdsIomLecNetAddrIndex | 1.3.6.1.4.1.148.1.4.1.1.2.1.1 | INTEGER | read-only | This object is used to index smdsIomLecNetAddrTable. |
| smdsIomLecNetAddrTable | 1.3.6.1.4.1.148.1.4.1.1.2 | not-accessible | This table lists network addresses, their address types (whether or not the address is an Embodied SAC) and the SMDS addresses of the test SNIs associated with the network addresses. | |
| ADR smdsIomLecNetAddrTestSNI | 1.3.6.1.4.1.148.1.4.1.1.2.1.4 | SMDSAddress | read-only | The value of this object reflects an SMDS Address assigned to the Test SNI that is associated with smdsIomLecNetAddrDigits. |
| ADR smdsIomNgaAddress | 1.3.6.1.4.1.148.1.4.1.1.4.1.7 | SMDSAddress | read-only | The value of this object identifies the NGA. |
| INT smdsIomNgaCountryCodeIndex | 1.3.6.1.4.1.148.1.4.1.1.4.1.1 | INTEGER | read-only | The value of this object identifies the country code portion of the NGA. |
| INT smdsIomNgaDestinCodeIndex | 1.3.6.1.4.1.148.1.4.1.1.4.1.2 | INTEGER | read-only | This object reflects the destination code portion of the NGA. For North America, the destination code is the first three digits following the country code. |
| smdsIomNgaEntry | 1.3.6.1.4.1.148.1.4.1.1.4.1 | not-accessible | An entry in the NGA Table | |
| ADR smdsIomNgaMember | 1.3.6.1.4.1.148.1.4.1.1.4.1.8 | SMDSAddress | read-only | The value of this object identifies an individual address that is a member of the NGA. |
| INT smdsIomNgaMemberCountryCodeIndex | 1.3.6.1.4.1.148.1.4.1.1.4.1.4 | INTEGER | read-only | The value of this object identifies the country code portion of an individual address that is a member of the NGA. |
| INT smdsIomNgaMemberDestinCodeIndex | 1.3.6.1.4.1.148.1.4.1.1.4.1.5 | INTEGER | read-only | This object reflects the destination code portion of an individual address that is a member of the NGA. |
| INT smdsIomNgaMemberSubscriberNoIndex | 1.3.6.1.4.1.148.1.4.1.1.4.1.6 | INTEGER | read-only | This object reflects the subscriber number portion of an individual address that is a member of the NGA. |
| INT smdsIomNgaSubscriberNoIndex | 1.3.6.1.4.1.148.1.4.1.1.4.1.3 | INTEGER | read-only | This object reflects the subscriber number portion of the NGA. For North America, the subscriber number is the last seven digits of the SMDS address of the NGA. |
| smdsIomNgaTable | 1.3.6.1.4.1.148.1.4.1.1.4 | not-accessible | This table lists the individual addresses that are members of a particular NGA. | |
| smdsIomServMIB | 1.3.6.1.4.1.148.1.4.1 | |||
| smdsIomServObjects | 1.3.6.1.4.1.148.1.4.1.1 | |||
| GAU smdsIomSniCurrentInfoDestinAddrScreenViolations | 1.3.6.1.4.1.148.1.4.1.1.5.1.3 | Gauge | read-only | The value of this object reflects the number of SIP L3_PDUs discarded because the destination address violated the address screening. |
| smdsIomSniCurrentInfoEntry | 1.3.6.1.4.1.148.1.4.1.1.5.1 | not-accessible | An entry in the SNI-Related Current Information Table | |
| INT smdsIomSniCurrentInfoIfIndex | 1.3.6.1.4.1.148.1.4.1.1.5.1.1 | INTEGER | read-only | The value of this object identifies the ifIndex associated with the appropriate SNI sublayer. For more information, refer to TR-TSV-001062. |
| GAU smdsIomSniCurrentInfoServDisagreeDiscards | 1.3.6.1.4.1.148.1.4.1.1.5.1.5 | Gauge | read-only | The value of this object reflects the number of SIP L3_PDUs discarded because of service disagreements. |
| INT smdsIomSniCurrentInfoSipErrorRatio | 1.3.6.1.4.1.148.1.4.1.1.5.1.4 | INTEGER | read-only | The value of this object reflects the result multiplied by a factor of 1000 of the ratio of the number of errored SIP L3_PDUs to the number of total incoming SIP L3_PDUs. |
| GAU smdsIomSniCurrentInfoSourceAddrScreenViolations | 1.3.6.1.4.1.148.1.4.1.1.5.1.2 | Gauge | read-only | The value of this object reflects the number of SIP L3_PDUs discarded because the source address violated the address screening. |
| smdsIomSniCurrentInfoTable | 1.3.6.1.4.1.148.1.4.1.1.5 | not-accessible | This table provides current SNI-related information. | |
| smdsIomSniIntervalInfoEntry | 1.3.6.1.4.1.148.1.4.1.1.6.1 | not-accessible | An entry in the SNI-Related Interval Information Table | |
| INT smdsIomSniIntervalInfoIfIndex | 1.3.6.1.4.1.148.1.4.1.1.6.1.1 | INTEGER | read-only | The value of this object identifies the ifIndex associated with the appropriate SNI sublayer. For more information, refer to TR-TSV-001062. |
| INT smdsIomSniIntervalInfoIntervalIndex | 1.3.6.1.4.1.148.1.4.1.1.6.1.2 | INTEGER | read-only | The value of this object identifies the interval index associated with the SNI-related information. An index of '1' is used to indicate the most recent interval and an index '4' is used to indicate the latest interval for which information is maintained. |
| GAU smdsIomSniIntervalInfoServDisagreeDiscards | 1.3.6.1.4.1.148.1.4.1.1.6.1.4 | Gauge | read-only | The value of this object reflects the number of SIP L3_PDUs discarded because of service disagreements. |
| INT smdsIomSniIntervalInfoSipErrorRatio | 1.3.6.1.4.1.148.1.4.1.1.6.1.3 | INTEGER | read-only | The value of this object reflects the result multiplied by a factor of 1000 of the ratio of the number of errored SIP L3_PDUs to the number of total incoming SIP L3_PDUs. |
| smdsIomSniIntervalInfoTable | 1.3.6.1.4.1.148.1.4.1.1.6 | not-accessible | This table provides SNI-related information from previous intervals. | |
| taTsv001237 | 1.3.6.1.4.1.148.1.4 |
RFC description
Vendor-private MIB for Intercarrier SMDS (Switched Multimegabit Data Service) network management and performance monitoring.
Start monitoring Vendor-neutral Bellcore/Telcordia standard (SMDS carrier interconnect equipment/gateways) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.