LSI-megaRAID-SAS-IR-MIB :: phyID

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › LSI-megaRAID-SAS-IR-MIB › phyID

phyID

Module: LSI-megaRAID-SAS-IR-MIB

OID (symbolic): LSI-megaRAID-SAS-IR-MIB::phyID

OID (numeric): 1.3.6.1.4.1.3582.5.1.4.5.1.2.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The phy ID of the attached device

What is phyID?

The PHY ID of the device attached at the far end of this SAS link. Admins use it when tracing a specific physical connection through an expander topology.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3582.5.1.4.5.1.2.1.4
snmpwalk -v2c -c public <target> LSI-megaRAID-SAS-IR-MIB::phyID

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3582.5.1.4.5.1.2.1.4.1
snmpget -v2c -c public <target> LSI-megaRAID-SAS-IR-MIB::phyID.1

Start monitoring Server with LSI/Broadcom MegaRAID SAS Integrated RAID controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LSI-megaRAID-SAS-IR-MIB::phyID OID value, configure state conditions and alerts, and monitor any Server with LSI/Broadcom MegaRAID SAS Integrated RAID controller from a single console.

OID Breakdown

Upper-level ancestors (7 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3582lsiAdapter-1030-MIB
Numeric OIDNameModule
1.3.6.1.4.1.3582.5lsiStorageComponentsLSI-megaRAID-SAS-IR-MIB
1.3.6.1.4.1.3582.5.1lsiRAIDServerLSI-megaRAID-SAS-IR-MIB
1.3.6.1.4.1.3582.5.1.4megaRAID_SAS_IRLSI-megaRAID-SAS-IR-MIB
1.3.6.1.4.1.3582.5.1.4.5topologyLSI-megaRAID-SAS-IR-MIB
1.3.6.1.4.1.3582.5.1.4.5.1phyInfoLSI-megaRAID-SAS-IR-MIB
1.3.6.1.4.1.3582.5.1.4.5.1.2phyTableLSI-megaRAID-SAS-IR-MIB
1.3.6.1.4.1.3582.5.1.4.5.1.2.1phyEntryLSI-megaRAID-SAS-IR-MIB
1.3.6.1.4.1.3582.5.1.4.5.1.2.1.4phyIDLSI-megaRAID-SAS-IR-MIB