LMS-COMPONENT-MIB

All MIBs › LMS-COMPONENT-MIB

Category: Device Management

Description: Objects for monitoring the individual hardware components of a device managed under LMS (LAN Management Solution).

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is LMS-COMPONENT-MIB?

LMS-COMPONENT-MIB is a Lotus/IBM-developed SNMP MIB for monitoring individual software and hardware components of a Lotus LAN Management Solution (LMS)-managed messaging server, part of an early Lotus Notes/Domino server management scheme. It exposes objects describing switch/server identity (ID, name, version), operational and desired operational status, message store database and filesystem utilization, and SNA connectivity state. It is explicitly used to monitor hardware/software health of the managed component, surfacing uptime (lmsSwitchUpTime), last-change timestamps, operational status, and message-store storage utilization as key health indicators. The MIB is largely self-contained but conceptually mirrors standard operational-status conventions used across many enterprise SNMP MIBs, aligning with common network-management practice even without explicit MIB imports shown. Typical deployment context is an IBM/Lotus LAN Management Solution console polling Notes/Domino mail servers and their subordinate switch components for availability and storage capacity. Engineers can download the LMS-COMPONENT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in LMS-COMPONENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Lotus/IBM LAN Management Solution server
Lotus Notes/Domino messaging server component

Monitoring Examples

An administrator would poll lmsSwitchOperStatus and lmsSwitchDesiredOperStatus to detect when a monitored switch/component has fallen out of its desired state, and check lmsSwitchLastChange to see how recently that happened. Polling lmsMsgStoreDatabaseUtilization and lmsMsgStoreFileSystemUtilization would reveal a mail/message store approaching capacity, a common precursor to mail delivery failures. lmsSwitchUpTime tracks how long the component has been running since last restart, and snaState exposes the health of any SNA gateway connectivity used by the LMS environment.

What Can Be Monitored

switch/component operational status
message store database utilization
message store filesystem utilization
component uptime
SNA connection state
last configuration/status change time

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
TimeTicks
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
lotus	1.3.6.1.4.1.334
notes	1.3.6.1.4.1.334.1
lcs	1.3.6.1.4.1.334.2
softswitch	1.3.6.1.4.1.334.3
common_mibs	1.3.6.1.4.1.334.3.1
lms	1.3.6.1.4.1.334.3.2
lmsComponent	1.3.6.1.4.1.334.3.2.1
lmsSwitch	1.3.6.1.4.1.334.3.2.1.1
STR lmsSwitchID	1.3.6.1.4.1.334.3.2.1.1.1	DisplayString	read-only	The Lotus supplied Identifier, uniquely identifying this switch.
STR lmsSwitchName	1.3.6.1.4.1.334.3.2.1.1.2	DisplayString	read-write	A brief descriptive name or nickname for this switch.
STR lmsSwitchVersion	1.3.6.1.4.1.334.3.2.1.1.3	DisplayString	read-only	The version, including patch level, of this switch.
TIK lmsSwitchUpTime	1.3.6.1.4.1.334.3.2.1.1.4	TimeTicks	read-only	The value of sysUpTime at the time this switch began execution.
INT lmsSwitchOperStatus	1.3.6.1.4.1.334.3.2.1.1.5	INTEGER	read-only	The current operational state of the switch.
TIK lmsSwitchLastChange	1.3.6.1.4.1.334.3.2.1.1.6	TimeTicks	read-only	The value of sysUpTime at the time this switch entered its current operational state. If the current state was entered prior to the last initialization of the local network management subsystem then this object contains a zero value.
INT lmsSwitchDesiredOperStatus	1.3.6.1.4.1.334.3.2.1.1.7	INTEGER	read-write	The desired operational state for this switch.
STR lmsSwitchDescr	1.3.6.1.4.1.334.3.2.1.1.8	DisplayString	read-write	A textual description for the switch. This may contain any pertinent details for the local or remote administrators.
STR lmsSwitchContact	1.3.6.1.4.1.334.3.2.1.1.9	DisplayString	read-write	The textual information of the contact person for this switch, together with information on how to contact that person.
lmsSystem	1.3.6.1.4.1.334.3.2.1.2
lmsMsgStore	1.3.6.1.4.1.334.3.2.1.3
INT lmsMsgStoreDatabaseUtilization	1.3.6.1.4.1.334.3.2.1.3.1	INTEGER	read-only	The current utilization of the relational database portion of the message store, expressed as a percentage.
INT lmsMsgStoreFileSystemUtilization	1.3.6.1.4.1.334.3.2.1.3.2	INTEGER	read-only	The current utilization of the native file system portion of the message store, expressed as a percentage.
lmsTransports	1.3.6.1.4.1.334.3.2.1.4
INT snaState	1.3.6.1.4.1.334.3.2.1.4.1	INTEGER	read-only	Indicates the operational status of the SNA transport subsystem. The values are: up - transport is operation and available down - transport is not available halted - transport is operational but not available congested - transport is operationallly overloaded (optional) restarting - transport is unavailable, but will be soon quiescing - transport is unavailable, shutdown in progress unknown - transport status is unknown or cannot be determined
INT osiState	1.3.6.1.4.1.334.3.2.1.4.2	INTEGER	read-only	Indicates the operational status of the OSI transport subsystem. The values are the same as those for snaState and tcpIpState.
INT tcpIpState	1.3.6.1.4.1.334.3.2.1.4.3	INTEGER	read-only	Indicates the operational status of the TCP/IP transport subsystem. The values are the same as those for snaState and osiState.
TIK transportLastUpdate	1.3.6.1.4.1.334.3.2.1.4.4	TimeTicks	read-only	The value of sysUpTime at the time the latest transport information was gathered.
lmsIPC	1.3.6.1.4.1.334.3.2.1.5
INT ipcOperStatus	1.3.6.1.4.1.334.3.2.1.5.1	INTEGER	read-only	Indicates the operational state of the IPC subsystem (XIPC).
NUM semaphoreMaxUsers	1.3.6.1.4.1.334.3.2.1.5.2	UInteger32	read-only	The configured maximum number of users of the semaphore subsystem.
GAU semaphoreCurrUsers	1.3.6.1.4.1.334.3.2.1.5.3	Gauge	read-only	The current number of users of the semaphore subsystem.
NUM semaphoreMaxSemaphores	1.3.6.1.4.1.334.3.2.1.5.4	UInteger32	read-only	The configured maximum number of semaphores in the semaphore subsystem.
GAU semaphoreCurrSemaphores	1.3.6.1.4.1.334.3.2.1.5.5	Gauge	read-only	The current number of semaphores in use in the semaphore subsystem.
NUM semaphoreMaxNodes	1.3.6.1.4.1.334.3.2.1.5.6	UInteger32	read-only	The configured maximum number of nodes in the semaphore subsystem.
GAU semaphoreCurrNodes	1.3.6.1.4.1.334.3.2.1.5.7	Gauge	read-only	The current number of nodes in use in the semaphore subsystem.
NUM sharedmemMaxUsers	1.3.6.1.4.1.334.3.2.1.5.8	UInteger32	read-only	The configured maximum number of users of the shared memory subsystem.
GAU sharedmemCurrUsers	1.3.6.1.4.1.334.3.2.1.5.9	Gauge	read-only	The current number of users of the shared memory subsystem.
NUM sharedmemMaxSeqments	1.3.6.1.4.1.334.3.2.1.5.10	UInteger32	read-only	The configured maximum number of seqments in the shared memory subsystem.
GAU sharedmemCurrSegments	1.3.6.1.4.1.334.3.2.1.5.11	Gauge	read-only	The current number of segments in use by the shared memory subsystem.
NUM sharedmemMaxNodes	1.3.6.1.4.1.334.3.2.1.5.12	UInteger32	read-only	The configured maximum number of nodes in the shared memory subsystem.
GAU sharedmemCurrNodes	1.3.6.1.4.1.334.3.2.1.5.13	Gauge	read-only	The current number of nodes in use by the shared memory subsystem.
NUM sharedmemMaxMempool	1.3.6.1.4.1.334.3.2.1.5.14	UInteger32	read-only	The configured maximum size of the mempool allowed for use by the shared memory subsystem
GAU sharedmemCurrMempool	1.3.6.1.4.1.334.3.2.1.5.15	Gauge	read-only	The current size of the mempool in use by the shared memory subsystem.
NUM msgqueueMaxUsers	1.3.6.1.4.1.334.3.2.1.5.16	UInteger32	read-only	The configured maximum number of users of the message queue subsystem.
GAU msgqueueCurrUsers	1.3.6.1.4.1.334.3.2.1.5.17	Gauge	read-only	The current number of users of the message queue subsystem.
NUM msgqueueMaxQueues	1.3.6.1.4.1.334.3.2.1.5.18	UInteger32	read-only	The configured maximum number of message queues to be used by the message queue subsystem.
GAU msgqueueCurrQueues	1.3.6.1.4.1.334.3.2.1.5.19	Gauge	read-only	The current number of message queues in use by the message queue subsystem.
NUM msgqueueMaxNodes	1.3.6.1.4.1.334.3.2.1.5.20	UInteger32	read-only	The configured maximum number of nodes in the message queue subsystem.
GAU msgqueueCurrNodes	1.3.6.1.4.1.334.3.2.1.5.21	Gauge	read-only	The current number of nodes in use by the message queue subsystem.
NUM msgqueueMaxMempool	1.3.6.1.4.1.334.3.2.1.5.22	UInteger32	read-only	The configured maximum size of the mempool allowed for use by the message queue subsystem.
GAU msgqueueCurrMempool	1.3.6.1.4.1.334.3.2.1.5.23	Gauge	read-only	The current size of the mempool in use by the message queue subsystem.
lmsDatabase	1.3.6.1.4.1.334.3.2.1.6
INT dbConfigSpaceUtilization	1.3.6.1.4.1.334.3.2.1.6.1	INTEGER	read-only	This is a percentage between 0 and 100 inclusive, representing the current utilization of config table space in the database.
INT dbNameSpaceUtilization	1.3.6.1.4.1.334.3.2.1.6.2	INTEGER	read-only	This is a percentage between 0 and 100 inclusive, representing the current utilization of names table space in the database.
INT dbDistribSpaceUtilization	1.3.6.1.4.1.334.3.2.1.6.3	INTEGER	read-only	This is a percentage between 0 and 100 inclusive, representing the current utilization of distrib table space in the database.
INT dbSystemSpaceUtilization	1.3.6.1.4.1.334.3.2.1.6.4	INTEGER	read-only	This is a percentage between 0 and 100 inclusive, representing the current utilization of system table space in the database.
TIK dbLastUpdate	1.3.6.1.4.1.334.3.2.1.6.5	TimeTicks	read-only	The value of sysUpTime at the time the latest database information was gathered.

RFC description

Defines SNMP objects for monitoring individual hardware components within a LMS (LAN Management Solution) managed network device.

Start monitoring Lotus/IBM LAN Management Solution server (Notes/Domino messaging component) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download LMS-COMPONENT-MIB

What Is LMS-COMPONENT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description