LJ9000mfp-MIB :: prtinputdimunit

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsLJ9000mfp-MIBprtinputdimunit

prtinputdimunit

Module: LJ9000mfp-MIB

OID (symbolic): LJ9000mfp-MIB::prtinputdimunit

OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: The unit of measurement for use calculating and relaying
dimensional values for this input sub-unit.
       Additional information:
       Following is a table of paper sizes and dimensions
       for each paper size supported by LaserJet 9000mfp:
       
       Size               Inches (ten-thousandths)    Millimeters
       ---------------    ------------------------    -----------
       eUSExecutive       72500 x 105000              184150 x 266700
       eUSLetter          85000 x 110000              215900 x 279400
       eUSLegal           85000 x 140000              215900 x 355600
       eISOandJISA5       58268 x 82677               148000 x 210000
       eISOandJISA4       82677 x 116929              210000 x 297000
       eJISB5             71654 x 101181              182000 x 257000
       eMonarch           38750 x 75000               98425  x 190500
       eCommercial10      41250 x 95000               104775 x 241300
       eInternationalDL   43307 x 86614               110000 x 220000
       eInternationalC5   63780 x 90157               162000 x 229000
       eInternationalB5   69291 x 98425               176000 x 250000
       eCustom            85000 x 140000 (max)        215900 x 355600 (max)

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3
snmpwalk -v2c -c public <target> LJ9000mfp-MIB::prtinputdimunit

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3.1
snmpget -v2c -c public <target> LJ9000mfp-MIB::prtinputdimunit.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3.1 i <value>

Start monitoring HP LaserJet 9000 series MFP with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ9000mfp-MIB::prtinputdimunit OID value, configure state conditions and alerts, and monitor any HP LaserJet 9000 series MFP from a single console.

OID Breakdown

Upper-level ancestors (16 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.11hpCLJ8500-MIB
1.3.6.1.4.1.11.2nmCLJ8500-MIB
1.3.6.1.4.1.11.2.3hpsystemCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9net_peripheralCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4netdmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2dmCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2printmibCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2.8prtInputCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2prtInputTableCLJ8500-MIB
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1prtInputEntryCLJ8500-MIB
Numeric OIDNameModule
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3prtinputdimunitLJ9000mfp-MIB