All MIBs › LJ9000mfp-MIB › prtconsoledisplaybuffertext
prtconsoledisplaybuffertext
Module: LJ9000mfp-MIB
OID (symbolic): LJ9000mfp-MIB::prtconsoledisplaybuffertext
OID (numeric): 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-only
Description: The content of a line in the logical display buffer of the operator's console of the printer. When a write operation occurs, normally a critical message, to one of the LineText strings, the agent should make that line displayable if a physical display is present. Writing a zero length string clears the line. It is an implementation-specific matter as to whether the agent allows a line to be overwritten before it has been cleared. Printer generated strings shall be in the localization specified by prtConsoleLocalization. Management Application generated strings should be localized by the Management Application. Additional information: Replaces PML STATUS-MSG-LINE1-PART1 and STATUS-MSG-LINE2-PART1 (read functionality). The proprietary objects BACKGROUND-STATUS-MSG-LINE1-PART1 and BACKGROUND-STATUS-MSG-LINE2-PART1 should be used to write messages to the control panel display.
prtConsoleDisplayBufferText.1.[1..8] maps to logical lines 1-8 of the display.
Most of the time the display will show a single one or two line message. This message can be retrieved by reading prtConsoleDisplayBufferText.1.1 and prtConsoleDisplayBufferText.1.2. In this case prtConsoleDisplayBufferText.1.[3..6] will be NULL.
If prtConsoleDisplayBufferText.1.3 or prtConsoleDisplayBufferText.1.4 is not NULL, the display will be alternating.
If prtConsoleDisplayBufferText.1.[5..k] are NULL, the display will alternate prtConsoleDisplayBufferText.1.[1..2] with prtConsoleDisplayBufferText.1.[3..4].
If prtConsoleDisplayBufferText.1.5 or prtConsoleDisplayBufferText.1.6 is not NULL, the display will show prtConsoleDisplayBufferText.1.[1..2] then prtConsoleDisplayBufferText.1.[3..4] then prtConsoleDisplayBufferText.1.[5..6].
The display will alternate between line pairs at three second intervals.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1.2 snmpwalk -v2c -c public <target> LJ9000mfp-MIB::prtconsoledisplaybuffertext
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1.2.1 snmpget -v2c -c public <target> LJ9000mfp-MIB::prtconsoledisplaybuffertext.1
Start monitoring HP LaserJet 9000 series MFP with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the LJ9000mfp-MIB::prtconsoledisplaybuffertext OID value, configure state conditions and alerts, and monitor any HP LaserJet 9000 series MFP from a single console.
OID Breakdown
Upper-level ancestors (16 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3 | hpsystem | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9 | net_peripheral | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4 | netdm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2 | dm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2 | printmib | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16 | prtConsoleDisplayBuffer | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5 | prtConsoleDisplayBufferTable | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1 | prtConsoleDisplayBufferEntry | CLJ8500-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.2.16.5.1.2 | prtconsoledisplaybuffertext | LJ9000mfp-MIB |