LIGO-RADIO3-DRV-MIB

All MIBs › LIGO-RADIO3-DRV-MIB

Organization: LigoWave

Last Updated: 2010-01-06

Category: Technology: Wireless, Vendor: LigoWave

Description: LigoWave MIB defining third-generation radio driver statistics and performance counters for LigoWave wireless devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is LIGO-RADIO3-DRV-MIB?

LIGO-RADIO3-DRV-MIB is a LigoWave vendor MIB providing driver-level statistics and configuration for the third-generation (Radio3) wireless radio hardware used in LigoWave's point-to-point and point-to-multipoint wireless bridge products. It exposes a per-endpoint statistics table covering radio identity (MAC/IP address, country code), configuration (encryption, capabilities), and performance counters such as transmit power and transmit packet counts, plus a notifications group for radio driver events. This MIB is used to monitor hardware/software status of the wireless radio link itself, tracking transmit power levels, packet transmission counts, encryption configuration, and endpoint connectivity to catch a degraded or dropped wireless link. No explicit dependency on other standard MIBs is evident from the available data, though it likely follows standard SNMPv2 notification conventions for ligoRdo3DrvNotifs. It is typically deployed by wireless ISPs or enterprises managing outdoor LigoWave point-to-point radio links. Engineers can download the LIGO-RADIO3-DRV-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in LIGO-RADIO3-DRV-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

LigoWave wireless radio/bridge device (3-series)

Monitoring Examples

An administrator would poll ligoRdo3StatsTable (via ligoRdo3StatsEntry, indexed by ligoRdo3Endpoint) to read ligoRdo3TxPower and ligoRdo3TxPackets, detecting a radio link degradation if transmit power drops unexpectedly or packet transmission counts stall. ligoRdo3LastUpdate would be checked to confirm the statistics are current, while ligoRdo3MacAddress and ligoRdo3IpAddress identify which remote endpoint the stats pertain to, and ligoRdo3Encryption confirms the link's security configuration hasn't changed unexpectedly.

What Can Be Monitored

radio transmit power
transmit packet count
endpoint MAC/IP address
encryption configuration
last statistics update time
radio capabilities

Imported Objects

From IF-MIB

ifIndex

OBJECT-TYPE

From LIGOWAVE-MIB

ligoMgmt

OBJECT-IDENTITY

From SNMPv2-MIB

sysLocation

OBJECT-TYPE

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

MacAddress

How to Use in IPNetwork Monitor

Example using ligoRdo3TxPackets OID:

Select a LigoWave wireless radio/bridge device, 3-serie (radio driver statistics) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ligoRdo3TxPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of transmitted packets. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ligoRadio3DrvMIB	1.3.6.1.4.1.32750.3.8			LigoWave 3 series radio driver MIB.
ligoRadio3DrvMIBObjects	1.3.6.1.4.1.32750.3.8.1
OCT ligoRdo3Capabilities	1.3.6.1.4.1.32750.3.8.1.3.1.1.8	OCTET STRING	read-only	Radio capabilities.
OCT ligoRdo3CountryCode	1.3.6.1.4.1.32750.3.8.1.3.1.1.5	OCTET STRING	read-only	Country code.
ligoRdo3DrvConf	1.3.6.1.4.1.32750.3.8.1.2
ligoRdo3DrvInfo	1.3.6.1.4.1.32750.3.8.1.1
ligoRdo3DrvNotifs	1.3.6.1.4.1.32750.3.8.1.0
ligoRdo3DrvStats	1.3.6.1.4.1.32750.3.8.1.3
OCT ligoRdo3Encryption	1.3.6.1.4.1.32750.3.8.1.3.1.1.6	OCTET STRING	read-only	Encryption type.
I32 ligoRdo3Endpoint	1.3.6.1.4.1.32750.3.8.1.3.1.1.1	Integer32	not-accessible	Peer index. Local device has index 0.
IP ligoRdo3IpAddress	1.3.6.1.4.1.32750.3.8.1.3.1.1.4	IpAddress	read-only	Device's IP address.
TIK ligoRdo3LastUpdate	1.3.6.1.4.1.32750.3.8.1.3.1.1.2	TimeTicks	read-only	sysUptime value of time point when statistics was gathered.
MAC ligoRdo3MacAddress	1.3.6.1.4.1.32750.3.8.1.3.1.1.3	MacAddress	read-only	Device's MAC address.
OCT ligoRdo3Parameters	1.3.6.1.4.1.32750.3.8.1.3.1.1.7	OCTET STRING	read-only	Radio parameters.
C32 ligoRdo3Rx40MhzBandwidth	1.3.6.1.4.1.32750.3.8.1.3.1.1.72	Counter32	read-only	Number of packets received using 40MHz bandwidth.
C32 ligoRdo3RxAclDiscarded	1.3.6.1.4.1.32750.3.8.1.3.1.1.42	Counter32	read-only	Number of received packets discarded by Access Control List check.
C32 ligoRdo3RxAmpdus	1.3.6.1.4.1.32750.3.8.1.3.1.1.57	Counter32	read-only	Number of received aggregated MAC Protocol Data Units.
C32 ligoRdo3RxAmsdus	1.3.6.1.4.1.32750.3.8.1.3.1.1.55	Counter32	read-only	Number of received aggregated MAC Service Data Units.
C32 ligoRdo3RxBlockAcks	1.3.6.1.4.1.32750.3.8.1.3.1.1.68	Counter32	read-only	Number of received block acknowledgments.
C32 ligoRdo3RxBroadcast	1.3.6.1.4.1.32750.3.8.1.3.1.1.48	Counter32	read-only	Number of received broadcast packets.
C32 ligoRdo3RxBytes	1.3.6.1.4.1.32750.3.8.1.3.1.1.36	Counter32	read-only	Number of received bytes.
C32 ligoRdo3RxCck	1.3.6.1.4.1.32750.3.8.1.3.1.1.51	Counter32	read-only	Number of packets received using Complementary Code Keying modulation.
C32 ligoRdo3RxControl	1.3.6.1.4.1.32750.3.8.1.3.1.1.44	Counter32	read-only	Number of received control packets.
C32 ligoRdo3RxCrcErrors	1.3.6.1.4.1.32750.3.8.1.3.1.1.38	Counter32	read-only	Number of received packets that failed CRC check.
C32 ligoRdo3RxData	1.3.6.1.4.1.32750.3.8.1.3.1.1.45	Counter32	read-only	Number of received data packets.
C32 ligoRdo3RxDropped	1.3.6.1.4.1.32750.3.8.1.3.1.1.37	Counter32	read-only	Number of dropped packets.
NTF ligoRdo3RxDropsThreshold	1.3.6.1.4.1.32750.3.8.1.0.1			This notification is sent when percentage of frames dropped in relation to number of frames received over the same time period reaches the threshold.
C32 ligoRdo3RxFragments	1.3.6.1.4.1.32750.3.8.1.3.1.1.69	Counter32	read-only	Number of received fragmented packets.
C32 ligoRdo3RxHtControl	1.3.6.1.4.1.32750.3.8.1.3.1.1.73	Counter32	read-only	Number of packets received using High Throughput encoding.
C32 ligoRdo3RxHtGreenfield	1.3.6.1.4.1.32750.3.8.1.3.1.1.54	Counter32	read-only	Number of packets received using High Throughput Greenfield mode.
C32 ligoRdo3RxHtMixedMode	1.3.6.1.4.1.32750.3.8.1.3.1.1.53	Counter32	read-only	Number of packets received using High Throughput mixed mode.
C32 ligoRdo3RxIcvErrors	1.3.6.1.4.1.32750.3.8.1.3.1.1.39	Counter32	read-only	Number of received packets with invalid Integrity Check Value.
C32 ligoRdo3RxKeyNotValid	1.3.6.1.4.1.32750.3.8.1.3.1.1.41	Counter32	read-only	Number of received packets with encryption key errors.
C32 ligoRdo3RxL2Pad	1.3.6.1.4.1.32750.3.8.1.3.1.1.67	Counter32	read-only	Number of packets received with padding between header and payload.
I32 ligoRdo3RxLastSigLevel0	1.3.6.1.4.1.32750.3.8.1.3.1.1.75	Integer32	read-only	Reception signal level on antenna 0.
I32 ligoRdo3RxLastSigLevel1	1.3.6.1.4.1.32750.3.8.1.3.1.1.76	Integer32	read-only	Reception signal level on antenna 1.
I32 ligoRdo3RxLastSigLevel2	1.3.6.1.4.1.32750.3.8.1.3.1.1.77	Integer32	read-only	Reception signal level on antenna 2.
I32 ligoRdo3RxLastSnr0	1.3.6.1.4.1.32750.3.8.1.3.1.1.79	Integer32	read-only	Last registered signal-to-noise level on antenna 0.
I32 ligoRdo3RxLastSnr1	1.3.6.1.4.1.32750.3.8.1.3.1.1.80	Integer32	read-only	Last registered signal-to-noise level on antenna 1.
C32 ligoRdo3RxManagement	1.3.6.1.4.1.32750.3.8.1.3.1.1.43	Counter32	read-only	Number of received management packets.
C32 ligoRdo3RxMicErrors	1.3.6.1.4.1.32750.3.8.1.3.1.1.40	Counter32	read-only	Number of received packets failing Message Integrity Code check.
C32 ligoRdo3RxMpduBytes	1.3.6.1.4.1.32750.3.8.1.3.1.1.58	Counter32	read-only	Number of bytes received in MAC Protocol Data Units.
C32 ligoRdo3RxMulticast	1.3.6.1.4.1.32750.3.8.1.3.1.1.49	Counter32	read-only	Number of received multicast packets.
I32 ligoRdo3RxNoise	1.3.6.1.4.1.32750.3.8.1.3.1.1.78	Integer32	read-only	Reception noise.
C32 ligoRdo3RxNullData	1.3.6.1.4.1.32750.3.8.1.3.1.1.47	Counter32	read-only	Number of received NULL DATA frames.
C32 ligoRdo3RxOfdm	1.3.6.1.4.1.32750.3.8.1.3.1.1.52	Counter32	read-only	Number of packets received using Orthogonal Frequency-Division Multiplexing modulation.
C32 ligoRdo3RxPackets	1.3.6.1.4.1.32750.3.8.1.3.1.1.35	Counter32	read-only	Number of received packets.
C32 ligoRdo3RxPacketsInAmsdus	1.3.6.1.4.1.32750.3.8.1.3.1.1.56	Counter32	read-only	Number of packets received in aggregated MAC Service Data Units.
OCT ligoRdo3RxPacketsPerMcs	1.3.6.1.4.1.32750.3.8.1.3.1.1.74	OCTET STRING	read-only	Number of packets received using each of Modulation and Coding Schemes.
C32 ligoRdo3RxRoBufBuffered	1.3.6.1.4.1.32750.3.8.1.3.1.1.63	Counter32	read-only	Number of packets held in reordering buffer.
C32 ligoRdo3RxRoBufDup	1.3.6.1.4.1.32750.3.8.1.3.1.1.61	Counter32	read-only	Number of duplicate packets in reordering buffer.
C32 ligoRdo3RxRoBufExpired	1.3.6.1.4.1.32750.3.8.1.3.1.1.62	Counter32	read-only	Number of expired packets in reordering buffer.
C32 ligoRdo3RxRoBufFlushed	1.3.6.1.4.1.32750.3.8.1.3.1.1.65	Counter32	read-only	Number of packets flushed from reordering buffer.
C32 ligoRdo3RxRoBufInSeq	1.3.6.1.4.1.32750.3.8.1.3.1.1.60	Counter32	read-only	Number of packets in reordering buffer which are in sequence.
C32 ligoRdo3RxRoBufReordered	1.3.6.1.4.1.32750.3.8.1.3.1.1.64	Counter32	read-only	Number of packets reordered in reordering buffer.
C32 ligoRdo3RxRoBufTooBig	1.3.6.1.4.1.32750.3.8.1.3.1.1.66	Counter32	read-only	Number of oversized packets dropped from reordering buffer.
C32 ligoRdo3RxRoBufTotal	1.3.6.1.4.1.32750.3.8.1.3.1.1.59	Counter32	read-only	Total number of received packets moved into reordering buffer.
C32 ligoRdo3RxShortGuardInt	1.3.6.1.4.1.32750.3.8.1.3.1.1.71	Counter32	read-only	Number of packets received with Short Guard Interval.
C32 ligoRdo3RxStbc	1.3.6.1.4.1.32750.3.8.1.3.1.1.70	Counter32	read-only	Number of packets received using Space-Time Block Coding technique.
C32 ligoRdo3RxUnicast	1.3.6.1.4.1.32750.3.8.1.3.1.1.50	Counter32	read-only	Number of received unicast packets.
C32 ligoRdo3RxUnknown	1.3.6.1.4.1.32750.3.8.1.3.1.1.46	Counter32	read-only	Number of received packets of unknown type.
ligoRdo3StatsEntry	1.3.6.1.4.1.32750.3.8.1.3.1.1		not-accessible	Radio driver's information and network traffic statistics table entry.
ligoRdo3StatsTable	1.3.6.1.4.1.32750.3.8.1.3.1		not-accessible	Radio driver's information and network traffic statistics table.
C32 ligoRdo3TxAckRequired	1.3.6.1.4.1.32750.3.8.1.3.1.1.22	Counter32	read-only	Number of packets transmitted which required acknowledgment.
C32 ligoRdo3TxAltRate	1.3.6.1.4.1.32750.3.8.1.3.1.1.24	Counter32	read-only	Number of data rate alterations.
C32 ligoRdo3TxAmsduBytes	1.3.6.1.4.1.32750.3.8.1.3.1.1.30	Counter32	read-only	Number of bytes transmitted in aggregated MAC Service Data Units.
C32 ligoRdo3TxAmsdus	1.3.6.1.4.1.32750.3.8.1.3.1.1.28	Counter32	read-only	Number of transmitted aggregated MAC Service Data Units.
C32 ligoRdo3TxBytes	1.3.6.1.4.1.32750.3.8.1.3.1.1.11	Counter32	read-only	Number of transmitted bytes.
C32 ligoRdo3TxFailed	1.3.6.1.4.1.32750.3.8.1.3.1.1.16	Counter32	read-only	Number of transmission failures.
C32 ligoRdo3TxFragBytes	1.3.6.1.4.1.32750.3.8.1.3.1.1.34	Counter32	read-only	Number of bytes transmitted in fragmented packets.
C32 ligoRdo3TxFragmented	1.3.6.1.4.1.32750.3.8.1.3.1.1.33	Counter32	read-only	Number of transmitted fragmented packets.
C32 ligoRdo3TxLegacy	1.3.6.1.4.1.32750.3.8.1.3.1.1.26	Counter32	read-only	Number of transmitted legacy packets.
C32 ligoRdo3TxLegacyBytes	1.3.6.1.4.1.32750.3.8.1.3.1.1.27	Counter32	read-only	Number of bytes transmitted in legacy mode.
C32 ligoRdo3TxManagement	1.3.6.1.4.1.32750.3.8.1.3.1.1.25	Counter32	read-only	Number of transmitted management frames.
C32 ligoRdo3TxMpduBytes	1.3.6.1.4.1.32750.3.8.1.3.1.1.32	Counter32	read-only	Number of bytes transmitted in MAC Protocol Data Units.
C32 ligoRdo3TxMpdus	1.3.6.1.4.1.32750.3.8.1.3.1.1.31	Counter32	read-only	Number of transmitted MAC Protocol Data Units.
C32 ligoRdo3TxMsdus	1.3.6.1.4.1.32750.3.8.1.3.1.1.20	Counter32	read-only	Number of transmitted MAC Service Data Units.
C32 ligoRdo3TxNoAckRequired	1.3.6.1.4.1.32750.3.8.1.3.1.1.23	Counter32	read-only	Number of packets transmitted which did not require acknowledgment.
C32 ligoRdo3TxNotAggregated	1.3.6.1.4.1.32750.3.8.1.3.1.1.21	Counter32	read-only	Number of packets transmitted without aggregation.
C32 ligoRdo3TxNotRetried	1.3.6.1.4.1.32750.3.8.1.3.1.1.18	Counter32	read-only	Number of packets sent without retries.
C32 ligoRdo3TxOverruns	1.3.6.1.4.1.32750.3.8.1.3.1.1.14	Counter32	read-only	Number of transmission overruns.
C32 ligoRdo3TxPacketsEx	1.3.6.1.4.1.32750.3.8.1.3.1.1.10	Counter32	read-only	Number of transmitted packets.
OCT ligoRdo3TxPacketsPerMcs	1.3.6.1.4.1.32750.3.8.1.3.1.1.19	OCTET STRING	read-only	Number of packets sent using each of Modulation and Coding Schemes.
C32 ligoRdo3TxPktsInAmsdus	1.3.6.1.4.1.32750.3.8.1.3.1.1.29	Counter32	read-only	Number of packets contained in transmitted aggregated MAC Service Data Units.
G32 ligoRdo3TxPower	1.3.6.1.4.1.32750.3.8.1.3.1.1.9	Gauge32	read-only	Transmission power.
C32 ligoRdo3TxRetried	1.3.6.1.4.1.32750.3.8.1.3.1.1.17	Counter32	read-only	Number of transmission retries.
NTF ligoRdo3TxRetriesThreshold	1.3.6.1.4.1.32750.3.8.1.0.2			This notification is sent when percentage of transmission retries in relation to number of frames transmitted over the same time period reaches the threshold.
C32 ligoRdo3TxSuccess	1.3.6.1.4.1.32750.3.8.1.3.1.1.15	Counter32	read-only	Number of successfully transmitted packets.
C32 ligoRdo3TxXmitDropped	1.3.6.1.4.1.32750.3.8.1.3.1.1.13	Counter32	read-only	Number of packets dropped because radio was offline or in reset state.
C32 ligoRdo3TxXmitFailed	1.3.6.1.4.1.32750.3.8.1.3.1.1.12	Counter32	read-only	Number of packets failing initial checks before sending them to radio hardware.

RFC description

LigoWave 3 series radio driver MIB for managing wireless radio device statistics and configuration.

Start monitoring LigoWave wireless radio/bridge device, 3-series (radio driver statistics) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download LIGO-RADIO3-DRV-MIB