All MIBs › KERNEL-READER-SUNMANAGEMENTCENTER-MIB
Organization: Sun Microsystems Inc.
Last Updated: 2000-09-18
Category: Domain: Network Management, Domain: Server Hardware, Vendor: Sun Microsystems
Description: Sun Microsystems MIB for reading kernel-level performance and resource statistics via the Sun Management Center monitoring framework.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is KERNEL-READER-SUNMANAGEMENTCENTER-MIB?
KERNEL-READER-SUNMANAGEMENTCENTER-MIB is a Sun Microsystems MIB, part of the Sun Management Center (SunMC) monitoring framework, that reads kernel-level operating system statistics from Solaris hosts including CPUs, disk drives, streams buffers, and virtual memory. It exposes data on active user sessions, system load, uptime, and detailed per-disk information. It is explicitly a hardware/software status monitoring MIB: krSystemLoadAvg1min/5min/15min and krSystemUpTime directly report CPU load and system uptime, while krDiskDetailTable exposes per-disk identity and presumably utilization data, and the stated purpose per its description covers CPU usage, disk and network I/O, and paging/swapping rates. It is a self-contained Sun enterprise MIB (under the sun/prod/sunsymon subtree) with no indicated dependency on external standard MIBs. It is deployed on Solaris servers managed through Sun Management Center for OS-level performance and capacity monitoring. Engineers can download the KERNEL-READER-SUNMANAGEMENTCENTER-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in KERNEL-READER-SUNMANAGEMENTCENTER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Sun/Solaris servers managed via Sun Management Center
Monitoring Examples
An administrator would poll krSystemLoadAvg1min, krSystemLoadAvg5min, and krSystemLoadAvg15min together to detect sustained high CPU load trending upward across the three windows, indicating a developing performance problem. krSystemUpTime would be checked after an alert to confirm whether a reboot occurred. krDiskDetailTable entries, indexed via krDDDiskName and labeled with krDiskAliasName, would be polled to track individual disk health or utilization, while krTotNumOfUsers and krTotNumOfSessions would be watched to correlate load spikes with active user session counts.
What Can Be Monitored
- system load average (1/5/15 min)
- system uptime
- total users and sessions
- console/primary user
- per-disk detail and identity
- CPU, disk I/O, and paging/swapping activity
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| sun | 1.3.6.1.4.1.42 | |||
| prod | 1.3.6.1.4.1.42.2 | |||
| sunsymon | 1.3.6.1.4.1.42.2.12 | |||
| agent | 1.3.6.1.4.1.42.2.12.2 | |||
| modules | 1.3.6.1.4.1.42.2.12.2.2 | |||
| kernelReader | 1.3.6.1.4.1.42.2.12.2.2.12 | The kernel reader mib obtains information from the operating system about kernel based entities, including CPUs, disk drives, streams buffers, VM statistics, etc. This information is used to monitor and report on CPU usage, disk and network I/O, Paging and swapping rates, and so on. | ||
| krUserGroup | 1.3.6.1.4.1.42.2.12.2.2.12.1 | User related statistics. | ||
| STR krConsoleUser | 1.3.6.1.4.1.42.2.12.2.2.12.1.1 | DisplayString | read-only | User currently logged in on the console. |
| I32 krTotNumOfUsers | 1.3.6.1.4.1.42.2.12.2.2.12.1.2 | Integer32 | read-only | Number of unique users currently logged in. |
| I32 krTotNumOfSessions | 1.3.6.1.4.1.42.2.12.2.2.12.1.3 | Integer32 | read-only | Number of currently active user sessions. |
| STR krPrimaryUser | 1.3.6.1.4.1.42.2.12.2.2.12.1.4 | DisplayString | read-only | The login name of the primary user. |
| krLoadGroup | 1.3.6.1.4.1.42.2.12.2.2.12.2 | Load related statistics. | ||
| STR krSystemLoadAvg1min | 1.3.6.1.4.1.42.2.12.2.2.12.2.1 | DisplayString | read-only | Load average of the system over the last 1 minute. |
| STR krSystemLoadAvg5min | 1.3.6.1.4.1.42.2.12.2.2.12.2.2 | DisplayString | read-only | Load average of the system over the last 5 minutes. |
| STR krSystemLoadAvg15min | 1.3.6.1.4.1.42.2.12.2.2.12.2.3 | DisplayString | read-only | Load average of the system over the last 15 minutes. |
| STR krSystemUpTime | 1.3.6.1.4.1.42.2.12.2.2.12.2.4 | DisplayString | read-only | The total time elapsed since the machine was last rebooted. |
| krDisk | 1.3.6.1.4.1.42.2.12.2.2.12.3 | |||
| krDiskDetailGroup | 1.3.6.1.4.1.42.2.12.2.2.12.3.1 | Disk detail related statistics. | ||
| krDiskDetailTable | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1 | not-accessible | Table of information about all the disks installed on the system. | |
| krDiskDetailEntry | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1 | not-accessible | Information about a disk installed on the system. | |
| STR krDDDiskName | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.1 | DisplayString | read-only | Name of the disk (sd0, etc ...). |
| STR krDiskAliasName | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.2 | DisplayString | read-only | Name of the disk alias (c0t0d0, etc). |
| STR krDiskReadOpRate | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.3 | DisplayString | read-only | Number of read operations per second on the disk. |
| STR krDiskWriteOpRate | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.4 | DisplayString | read-only | Number of write operations per second on the disk. |
| STR krDiskOperationRate | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.5 | DisplayString | read-only | Total number of read and write operations per second (read + write) on the disk. |
| STR krDiskDataReadRate | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.6 | DisplayString | read-only | Rate of data reads per second from this disk, in Kbytes per second. |
| STR krDiskDataWriteRate | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.7 | DisplayString | read-only | Rate of data writes per second to this disk, in Kbytes per second. |
| STR krDiskDataTransferRate | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.8 | DisplayString | read-only | Rate of data transfers per second to or from this disk, in Kbytes per second. |
| STR krDiskAvgWaitTrans | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.9 | DisplayString | read-only | Average number of transactions waiting. |
| STR krDiskAvgRunTrans | 1.3.6.1.4.1.42.2.12.2.2.12.3.1.1.1.10 | DisplayString | read-only | Average number of transactions running. |
| krDiskSrvcTimeGroup | 1.3.6.1.4.1.42.2.12.2.2.12.3.2 | Disk load related statistics. | ||
| krDiskSrvTable | 1.3.6.1.4.1.42.2.12.2.2.12.3.2.1 | not-accessible | Table of performance related information for all the disks. | |
| krDiskSrvEntry | 1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1 | not-accessible | Performance related information for one disk. | |
| STR krDSDiskName | 1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.1 | DisplayString | read-only | Name of the disk (sd0, etc ...). |
| STR krDiskSrvcWaitPctTime | 1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.2 | DisplayString | read-only | Percentage of time there is a transaction waiting for service (wait queue length). |
| STR krDiskBusyPctTime | 1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.3 | DisplayString | read-only | Percentage of time the disk is busy (transaction running). |
| STR krDiskSrvcAvgWaitTime | 1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.4 | DisplayString | read-only | The average wait service time in msec for one disk transaction, either read or write. |
| STR krDiskSrvcAvgTransRunTime | 1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.5 | DisplayString | read-only | The average run service time in msec for one disk transaction, either read or write. |
| STR krDiskSrvcAvgTransTime | 1.3.6.1.4.1.42.2.12.2.2.12.3.2.1.1.6 | DisplayString | read-only | The average service (run + wait) time in msec for one disk transaction, either read or write. |
| krFileSystem | 1.3.6.1.4.1.42.2.12.2.2.12.4 | |||
| krUFSFileSystemGroup | 1.3.6.1.4.1.42.2.12.2.2.12.4.1 | UFS file system related statistics. | ||
| krUFSFileTable | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1 | not-accessible | Table of information about UFS file systems. | |
| krUFSFileEntry | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1 | not-accessible | Information about a UFS file system. | |
| STR krUFSFileSystemIndex | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.1 | DisplayString | read-only | The index for the file system in table. |
| STR krUFSFileSystemMountPoint | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.2 | DisplayString | read-only | The full pathname where the file system is mounted. |
| STR krUFSFileSystemDiskName | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.3 | DisplayString | read-only | The name of the device (/dev/dsk/...). |
| I32 krUFSFileSystemSize | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.4 | Integer32 | read-only | The total size of the file system, in Kbytes. |
| I32 krUFSFileSystemFreeSpace | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.5 | Integer32 | read-only | Available disk space in the file system, in Kbytes. |
| I32 krUFSFreeSpaceForNonSU | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.6 | Integer32 | read-only | Available disk space in file system for non-superusers, in Kbytes. |
| STR krUFSFileSystemPctUsedSpace | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.7 | DisplayString | read-only | Percentage of disk space used in the file system. |
| I32 krUFSTotNumOfInodes | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.8 | Integer32 | read-only | The total number of inodes in the file system. |
| I32 krUFSTotNumOfInodesAvail | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.9 | Integer32 | read-only | The total number of inodes available in the file system. |
| STR krUFSPctInodesUsed | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.10 | DisplayString | read-only | Percentage of inodes used in the file system. |
| C64 krUFSFileSystemSize64 | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.11 | Counter64 | read-only | The total size of the TeraByte file system, in Kbytes. |
| C64 krUFSFileSystemFreeSpace64 | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.12 | Counter64 | read-only | The total Free space in the TeraByte file system, in Kbytes. |
| C64 krUFSFreeSpaceForNonSU64 | 1.3.6.1.4.1.42.2.12.2.2.12.4.1.1.1.13 | Counter64 | read-only | The total Available space for non-superusers in the TeraByte file system, in Kbytes. |
| krVXFSFileSystemGroup | 1.3.6.1.4.1.42.2.12.2.2.12.4.2 | VXFS file system related statistics. | ||
| krVXFSFileTable | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1 | not-accessible | Table of information about VXFS file systems. | |
| krVXFSFileEntry | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1 | not-accessible | Information about a VXFS file system. | |
| STR krVXFSFileSystemIndex | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.1 | DisplayString | read-only | The index of the file system in the table. |
| STR krVXFSFileSystemMountPoint | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.2 | DisplayString | read-only | The full pathname where the file system is mounted. |
| STR krVXFSFileSystemDiskName | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.3 | DisplayString | read-only | The name of the device (/dev/dsk/...). |
| I32 krVXFSFileSystemSize | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.4 | Integer32 | read-only | The total size of the file system, in Kbytes. |
| I32 krVXFSFileSystemFreeSpace | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.5 | Integer32 | read-only | Available disk space of the file system, in Kbytes. |
| I32 krVXFSFreeSpaceForNonSU | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.6 | Integer32 | read-only | Available disk space in file system for non-superusers, in Kbytes. |
| STR krVXFSFileSystemPctUsedSpace | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.7 | DisplayString | read-only | Percentage of disk space used in the file system. |
| I32 krVXFSTotNumOfInodes | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.8 | Integer32 | read-only | The total number of inodes in the file system. |
| I32 krVXFSTotNumOfInodesAvail | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.9 | Integer32 | read-only | The total number of inodes available in the file system. |
| STR krVXFSPctInodesUsed | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.10 | DisplayString | read-only | Percentage of inodes used in the file system. |
| C64 krVXFSFileSystemSize64 | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.11 | Counter64 | read-only | Total disk space in TeraByte file system, in Kbytes. |
| C64 krVXFSFileSystemFreeSpace64 | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.12 | Counter64 | read-only | Total free space in TeraByte file system, in Kbytes. |
| C64 krVXFSFreeSpaceForNonSU64 | 1.3.6.1.4.1.42.2.12.2.2.12.4.2.1.1.13 | Counter64 | read-only | Available disk space in TeraByte file system for non-superusers, in Kbytes. |
| krCPUDetail | 1.3.6.1.4.1.42.2.12.2.2.12.5 | |||
| krCPUUtilGroup | 1.3.6.1.4.1.42.2.12.2.2.12.5.1 | CPU utilization related statistics. | ||
| krCPUUtilTable | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1 | not-accessible | Table of CPU utilization information for all CPUs. | |
| krCPUUtilEntry | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1 | not-accessible | CPU utilization information for one CPU. | |
| I32 krCPUInstance | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.1 | Integer32 | read-only | The CPU number. |
| STR krCPUDelta | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.2 | DisplayString | read-only | The delta of V1(value 1) and V2(value 2), where V1 and V2 are the cumulative CPU clock ticks taken at different times which is either when refresh interval reaches or when the mannual refresh is issued. V1 or V2 is the Sum of CPU_IdleTime, CPU_UserModeTime, CPU_KernelModeTime and CPU_WaitTime. If V1 is the previous value and V2 is the current value then krCPUDelta = V2 - V1. |
| STR krCPUIdleTime | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.3 | DisplayString | read-only | Idle CPU time in percentage of CPU delta. If V1 is the previous value of idle time and V2 is the current value of idle time then krCPUIdleTime = ( V2 - V1 ) * 100 / krCPUDelta . |
| STR krCPUUserModeTime | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.4 | DisplayString | read-only | Time spent by CPU in user mode in percentage of CPU delta. If V1 is the previous value of user mode time and V2 is the current value of user mode time then krCPUUserModeTime = ( V2 - V1 ) * 100 / krCPUDelta . |
| STR krCPUKernelModeTime | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.5 | DisplayString | read-only | Time spent by CPU in kernel mode in percentage of CPU delta. If V1 is the previous value of kernel mode time and V2 is the current value of kernel mode time then krCPUKernelModeTime = ( V2 - V1 ) * 100 / krCPUDelta . |
| STR krCPUTotWaitTime | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.6 | DisplayString | read-only | Total CPU wait time in percentage of CPU delta. If V1 is the previous value of CPU wait time and V2 is the current value of CPU wait time then krCPUTotWaitTime = ( V2 - V1 ) * 100 / krCPUDelta . |
| STR krCPUTotIOWaitTime | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.7 | DisplayString | read-only | Total CPU IO wait time in percentage of CPU delta. If V1 is the previous value of CPU IO wait time and V2 is the current value of CPU IO wait time then krCPUTotIOWaitTime = ( V2 - V1 ) * 100 / krCPUDelta . |
| STR krCPUTotSwapWaitTime | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.8 | DisplayString | read-only | Total CPU swap wait time in percentage of CPU delta. If V1 is the previous value of CPU swap wait time and V2 is the current value of CPU swap wait time then krCPUTotSwapWaitTime = ( V2 - V1 ) * 100 / krCPUDelta . |
| STR krCPUTotPIOWaitTime | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.9 | DisplayString | read-only | Total CPU peripheral IO wait time in percentage of CPU delta. If V1 is the previous value of CPU peripheral wait time and V2 is the current value of CPU peripheral wait time then krCPUTotPIOWaitTime = ( V2 - V1 ) * 100 / krCPUDelta . |
| C64 krCPUNumOfIdleThreadSched | 1.3.6.1.4.1.42.2.12.2.2.12.5.1.1.1.10 | Counter64 | read-only | The rate of number of idle thread scheduled. If V1 and V2 is the number of idle threads scheduled found at time T1 and T2 respectively then krCPUNumOfIdleThreadSched = (V2 - V1)/(T2 - T1). |
| krCPUProcess | 1.3.6.1.4.1.42.2.12.2.2.12.5.2 | |||
| krCPUProcInStatesGroup | 1.3.6.1.4.1.42.2.12.2.2.12.5.2.1 | Statistics related to numbers of processes in different states. | ||
| I32 krTotProcInRunQueue | 1.3.6.1.4.1.42.2.12.2.2.12.5.2.1.1 | Integer32 | read-only | Number of processes in run queue. |
| I32 krTotProcBlocked | 1.3.6.1.4.1.42.2.12.2.2.12.5.2.1.2 | Integer32 | read-only | Number of processes blocked for resources. |
| I32 krTotProcReadyInSwap | 1.3.6.1.4.1.42.2.12.2.2.12.5.2.1.3 | Integer32 | read-only | Number of processes runnable but swapped. |
| I32 krTotNumberOfCPUs | 1.3.6.1.4.1.42.2.12.2.2.12.5.2.1.4 | Integer32 | read-only | Total number Of CPUs. |
| krCPUIOGroup | 1.3.6.1.4.1.42.2.12.2.2.12.5.3 | CPU I/O related statistics. | ||
| krCPUIOTable | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1 | not-accessible | Table of CPU I/O information for all CPUs. | |
| krCPUIOEntry | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1 | not-accessible | I/O related information for one CPU. | |
| I32 krIOCPUInstance | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.1 | Integer32 | read-only | The CPU number. |
| C64 krNumPhyBlocksRead | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.2 | Counter64 | read-only | The rate of number of physical blocks read. Number of physical blocks read is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumPhyBlocksRead = (Y - X)/(T2 - T1). |
| C64 krNumPhyBlocksWrite | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.3 | Counter64 | read-only | The rate of number of physical blocks written (sync or async). Number of physical blocks written is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumPhyBlocksWrite = (Y - X)/(T2 - T1). |
| C64 krNumLogBlocksRead | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.4 | Counter64 | read-only | The rate of number of logical blocks read. Number of logical blocks read is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumLogBlocksRead = (Y - X)/(T2 - T1). |
| C64 krNumLogBlocksWrite | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.5 | Counter64 | read-only | The rate of number of logical blocks written. Number of logical blocks written is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumLogBlocksWrite = (Y - X)/(T2 - T1). |
| C64 krNumRawIOReads | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.6 | Counter64 | read-only | The rate of cummulative number of raw I/O reads. Cummulative number of raw I/O reads is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumRawIOReads = (Y - X)/(T2 - T1). |
| C64 krNumRawIOWrites | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.7 | Counter64 | read-only | The rate of cummulative number of raw I/O writes. Cummulative number of raw I/O writes is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumRawIOWrites = (Y - X)/(T2 - T1). |
| C64 krNumBytesRead | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.8 | Counter64 | read-only | The rate of Number of bytes read by rdwr(). Number of bytes read by rdwr() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumBytesRead = (Y - X)/(T2 - T1). |
| C64 krNumBytesWritten | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.9 | Counter64 | read-only | The rate of number of bytes written by rdwr(). Number of bytes written by rdwr() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumBytesWritten = (Y - X)/(T2 - T1). |
| C64 krrcvint | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.10 | Counter64 | read-only | UNUSED. |
| C64 krxmtint | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.11 | Counter64 | read-only | UNUSED. |
| C64 krmdmint | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.12 | Counter64 | read-only | UNUSED. |
| C64 krNumTermInputChars | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.13 | Counter64 | read-only | The rate of number of terminal input characters. Number of terminal input characters is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumTermInputChars = (Y - X)/(T2 - T1). |
| C64 krNumCanModeCharsHandled | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.14 | Counter64 | read-only | The rate of number of characters handled in canonical mode. Number of characters handled in canonical mode is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumCanModeCharsHandled = (Y - X)/(T2 - T1). |
| C64 krNumTermOutChars | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.15 | Counter64 | read-only | The rate of number of terminal output characters. Number of terminal output characters is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumTermOutChars = (Y - X)/(T2 - T1). |
| C64 krNumPhyBlocksAsyncWrite | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.16 | Counter64 | read-only | The rate of number of asynchronous physical block writes. Number of physical block writes asynchronously is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumPhyBlocksAsyncWrite = (Y - X)/(T2 - T1). |
| C64 krphysio | 1.3.6.1.4.1.42.2.12.2.2.12.5.3.1.1.17 | Counter64 | read-only | UNUSED. |
| krCPUInterruptsGroup | 1.3.6.1.4.1.42.2.12.2.2.12.5.4 | CPU interrupt related statistics. | ||
| krCPUIntrTable | 1.3.6.1.4.1.42.2.12.2.2.12.5.4.1 | not-accessible | Table of CPU Interrupts related information. | |
| krCPUIntrEntry | 1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1 | not-accessible | CPU Interrupts related information for one CPU. | |
| I32 krIntrCPUInstance | 1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.1 | Integer32 | read-only | The CPU number. |
| C64 krNumOfContextSwitches | 1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.2 | Counter64 | read-only | The rate of number of context switches. Number of context switches is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfContextSwitches = (Y - X)/(T2 - T1). |
| C64 krNumberOfTraps | 1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.3 | Counter64 | read-only | The rate of number of traps. Number of traps is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumberOfTraps = (Y - X)/(T2 - T1). |
| C64 krNumberOfDevInterrupts | 1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.4 | Counter64 | read-only | The rate of number of device interrupts. Number of device interrupts is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumberOfDevInterrupts = (Y - X)/(T2 - T1). |
| C64 krNumOfIntrThreads | 1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.5 | Counter64 | read-only | The rate of number of interrupts as threads. Number of interrupts as threads is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfIntrThreads = (Y - X)/(T2 - T1). |
| C64 krNumOfInterrupts | 1.3.6.1.4.1.42.2.12.2.2.12.5.4.1.1.6 | Counter64 | read-only | The rate of number of interrupts locked, prempted, or released. Number of interrupts locked, prempted, or released is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfInterrupts = (Y - X)/(T2 - T1). |
| krCPUSyscallGroup | 1.3.6.1.4.1.42.2.12.2.2.12.5.5 | System call related statistics. | ||
| krCPUSysTable | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1 | not-accessible | Table of system call related information for all CPUs. | |
| krCPUSysEntry | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1 | not-accessible | System call related information for one CPU. | |
| I32 krSyscCPUInstance | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.1 | Integer32 | read-only | The CPU number. |
| C64 krNumOfSysCallsMade | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.2 | Counter64 | read-only | The rate of number of system calls made. Number of system calls made is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSysCallsMade = (Y - X)/(T2 - T1). |
| C64 krNumOfSysReads | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.3 | Counter64 | read-only | The rate of number of system reads using read() and readv(). Number of reads using read() and readv() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSysReads = (Y - X)/(T2 - T1). |
| C64 krNumOfSysWrites | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.4 | Counter64 | read-only | The rate of number of system writes using write() and writev(). Number of writes using write() and writev() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSysWrites = (Y - X)/(T2 - T1). |
| C64 krNumOfForksCalled | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.5 | Counter64 | read-only | The rate of number of forks called. Number of forks called is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfForksCalled = (Y - X)/(T2 - T1). |
| C64 krNumOfVForksCalled | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.6 | Counter64 | read-only | The rate of number of vforks called. Number of vforks called is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfVForksCalled = (Y - X)/(T2 - T1). |
| C64 krNumOfExecsCalled | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.7 | Counter64 | read-only | The rate of number of execs called. Number of execs called is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfExecsCalled = (Y - X)/(T2 - T1). |
| C64 krTotNumOfMessages | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.8 | Counter64 | read-only | The rate of sum of messages sent or received by msgrcv() and msgsnd(). Sum of messages sent or received by msgrcv() and msgsnd() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krTotNumOfMessages = (Y - X)/(T2 - T1). |
| C64 krTotNumOfSemops | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.9 | Counter64 | read-only | The rate of number of semaphore operations using semop() call. Number of semaphore operations using semop() call is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krTotNumOfSemops = (Y - X)/(T2 - T1). |
| C64 krNumOfPnameLookup | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.10 | Counter64 | read-only | The rate of number of pathname lookup. Number of pathname lookup is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPnameLookup = (Y - X)/(T2 - T1). |
| C64 krNumOfUfsigetcalls | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.11 | Counter64 | read-only | The rate of number of ufs_iget() calls. Number of ufs_iget() calls is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfUfsigetcalls = (Y - X)/(T2 - T1). |
| C64 krNumOfDirBlocksRead | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.12 | Counter64 | read-only | The rate of number of directory blocks read. Number of directory blocks read is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfDirBlocksRead = (Y - X)/(T2 - T1). |
| C64 krNumOfInodesTakenWAP | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.13 | Counter64 | read-only | The rate of number of inodes taken with attached pages. Number of inodes taken with attached pages is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfInodesTakenWAP = (Y - X)/(T2 - T1). |
| C64 krNumOfInodesTakenWNAP | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.14 | Counter64 | read-only | The rate of number of inodes taken with no attached pages. Number of inodes taken with no attached pages is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfInodesTakenWNAP = (Y - X)/(T2 - T1). |
| C64 krNumOfInodeTblOvrFlow | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.15 | Counter64 | read-only | The rate of number of inode table overflows. Number of inode table overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfInodeTblOvrFlow = (Y - X)/(T2 - T1). |
| C64 krNumOfFileTblOvrFlow | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.16 | Counter64 | read-only | The rate of number of file table overflows. Number of file table overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfFileTblOvrFlow = (Y - X)/(T2 - T1). |
| C64 krNumOfProcTblOvrFlow | 1.3.6.1.4.1.42.2.12.2.2.12.5.5.1.1.17 | Counter64 | read-only | The rate of number of proc table overflows. Number of proc table overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfProcTblOvrFlow = (Y - X)/(T2 - T1). |
| krCPUMiscGroup | 1.3.6.1.4.1.42.2.12.2.2.12.5.6 | Miscellaneous statistics. | ||
| krCPUMiscTable | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1 | not-accessible | Table of miscellaneous information about all CPUs. | |
| krCPUMiscEntry | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1 | not-accessible | Miscellaneous information for one CPU. | |
| I32 krMiscCPUInstance | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.1 | Integer32 | read-only | The CPU number. |
| C64 krNumOfIvolCSwitches | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.2 | Counter64 | read-only | The rate of number of involuntary context switches. Number of involuntary context switches is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfIvolCSwitches = (Y - X)/(T2 - T1). |
| C64 krNumOfThrCreateCalls | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.3 | Counter64 | read-only | The rate of number of thread_create() calls. Number of thread_create() calls is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfThrCreateCalls = (Y - X)/(T2 - T1). |
| C64 krNumOfCPUMig | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.4 | Counter64 | read-only | The rate of number of CPU migrations by threads. Number of CPU migrations by threads is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfCPUMig = (Y - X)/(T2 - T1). |
| C64 krNumOfxcalls | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.5 | Counter64 | read-only | The rate of number of xcalls to other CPU. Number of xcalls to other CPU is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfxcalls = (Y - X)/(T2 - T1). |
| C64 krNumOfFldMutxEntrs | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.6 | Counter64 | read-only | The rate of number of failed mutex enters. Number of failed mutex enters is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfFldMutxEntrs = (Y - X)/(T2 - T1). |
| C64 krNumOfRWReaderFails | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.7 | Counter64 | read-only | The rate of number of rw reader failures. Number of rw reader failures is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRWReaderFails = (Y - X)/(T2 - T1). |
| C64 krNumOfRWWriterFails | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.8 | Counter64 | read-only | The rate of number of rw writer failures. Number of rw writer failures is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRWWriterFails = (Y - X)/(T2 - T1). |
| C64 krNumOfModuleLoads | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.9 | Counter64 | read-only | The rate of number of times loadable modules loaded. Number of times loadable modules loaded is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfModuleLoads = (Y - X)/(T2 - T1). |
| C64 krNumOfModuleUnloads | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.10 | Counter64 | read-only | The rate of number of times loadable modules unloaded. Number of times loadable modules unloaded is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfModuleUnloads = (Y - X)/(T2 - T1). |
| C64 krNumOfRWLockTry | 1.3.6.1.4.1.42.2.12.2.2.12.5.6.1.1.11 | Counter64 | read-only | The rate of number of tries to acquire rw lock. Number of tries to acquire rw lock is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRWLockTry = (Y - X)/(T2 - T1). |
| krCPURegWindowGroup | 1.3.6.1.4.1.42.2.12.2.2.12.5.7 | CPU register window related statistics. | ||
| krCPURegTable | 1.3.6.1.4.1.42.2.12.2.2.12.5.7.1 | not-accessible | Table of CPU register window related information for all CPUs. | |
| krCPURegEntry | 1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1 | not-accessible | CPU register window related information for one CPU. | |
| I32 krRWCPUInstance | 1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.1 | Integer32 | read-only | The CPU number. |
| C64 krNumOfRegWinUsrOvrFlow | 1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.2 | Counter64 | read-only | The rate of number of register window user overflows. Number of register window user overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRegWinUsrOvrFlow = (Y - X)/(T2 - T1). |
| C64 krNumOfRegWinUsrUndrFlow | 1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.3 | Counter64 | read-only | The rate of number of register window user underflows. Number of register window user underflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRegWinUsrUndrFlow = (Y - X)/(T2 - T1). |
| C64 krNumOfRegWinSysOvrFlow | 1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.4 | Counter64 | read-only | The rate of number of register window system overflows. Number of register window system overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRegWinSysOvrFlow = (Y - X)/(T2 - T1). |
| C64 krNumOfRegWinSysUndrFlow | 1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.5 | Counter64 | read-only | The rate of number of register window system underflows. Number of register window system underflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRegWinSysUndrFlow = (Y - X)/(T2 - T1). |
| C64 krNumOfRegWinSysUsrOvrFlow | 1.3.6.1.4.1.42.2.12.2.2.12.5.7.1.1.6 | Counter64 | read-only | The rate of number of register window system user overflows. Number of register window system user overflows is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfRegWinSysUsrOvrFlow = (Y - X)/(T2 - T1). |
| krCPUPginfoGroup | 1.3.6.1.4.1.42.2.12.2.2.12.5.8 | CPU page related statistics. | ||
| krCPUPgTable | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1 | not-accessible | Table of paging related information for all CPUs. | |
| krCPUPgEntry | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1 | not-accessible | Paging related information for one CPU. | |
| I32 krPgCPUInstance | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.1 | Integer32 | read-only | The CPU number. |
| C64 krNumOfPageReclaims | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.2 | Counter64 | read-only | The rate of number of page reclaims including pageout. Number of page reclaims including pageout is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPageReclaims = (Y - X)/(T2 - T1). |
| C64 krNumOfFreeListPgReclaims | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.3 | Counter64 | read-only | The rate of number of page reclaims from free list. Number of page reclaims from free list is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfFreeListPgReclaims = (Y - X)/(T2 - T1). |
| C64 krNumOfPageIns | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.4 | Counter64 | read-only | The rate of number of pageins. Number of pageins is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPageIns = (Y - X)/(T2 - T1). |
| C64 krNumOfPgsPagedIn | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.5 | Counter64 | read-only | The rate of number of pages paged in. Number of pages paged in is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPgsPagedIn = (Y - X)/(T2 - T1). |
| C64 krNumOfPageOuts | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.6 | Counter64 | read-only | The rate of number of pageouts. Number of pageouts is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPageOuts = (Y - X)/(T2 - T1). |
| C64 krkrNumOfPgsPagedOut | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.7 | Counter64 | read-only | The rate of number of pages paged out. Number of pages paged out is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krkrNumOfPgsPagedOut = (Y - X)/(T2 - T1). |
| C64 krNumOfSwapIns | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.8 | Counter64 | read-only | The rate of number of swapins. Number of swapins is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSwapIns = (Y - X)/(T2 - T1). |
| C64 krNumOfPgsSwappedIn | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.9 | Counter64 | read-only | The rate of number of pages swapped in. Number of pages swapped in is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPgsSwappedIn = (Y - X)/(T2 - T1). |
| C64 krNumOfSwapOuts | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.10 | Counter64 | read-only | The rate of number of swapouts. Number of swapouts is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSwapOuts = (Y - X)/(T2 - T1). |
| C64 krNumOfPgsSwappedOut | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.11 | Counter64 | read-only | The rate of number of pages swapped out. Number of pages swapped out is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPgsSwappedOut = (Y - X)/(T2 - T1). |
| C64 krNumOfZeroFilledPages | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.12 | Counter64 | read-only | The rate of number of pages zero filled on demand. Number of pages zero filled on demand is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfZeroFilledPages = (Y - X)/(T2 - T1). |
| C64 krNumOfAutoFreedPages | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.13 | Counter64 | read-only | The rate of number of pages freed by daemon or auto. Number of pages freed by daemon or auto is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfAutoFreedPages = (Y - X)/(T2 - T1). |
| C64 krNumberOfScanedPages | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.14 | Counter64 | read-only | The rate of number of pages examined by pageout daemons. Number of pages examined by pageout daemons is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumberOfScanedPages = (Y - X)/(T2 - T1). |
| C64 krNumOfPDHandsRvln | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.15 | Counter64 | read-only | The rate of number of revolutions of the page daemon hands. Number of revolutions of the page daemon hands is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPDHandsRvln = (Y - X)/(T2 - T1). |
| C64 krNumOfPagerRun | 1.3.6.1.4.1.42.2.12.2.2.12.5.8.1.1.16 | Counter64 | read-only | The rate of number of times pager was scheduled. Number of times pager was scheduled is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfPagerRun = (Y - X)/(T2 - T1). |
| krCPUFaultsGroup | 1.3.6.1.4.1.42.2.12.2.2.12.5.9 | CPU fault related statistics. | ||
| krCPUFaultTable | 1.3.6.1.4.1.42.2.12.2.2.12.5.9.1 | not-accessible | Table of CPU fault related information for all CPUs. | |
| krCPUFaultEntry | 1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1 | not-accessible | CPU fault related information for one CPU. | |
| I32 krFaultCPUInstance | 1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.1 | Integer32 | read-only | The CPU number. |
| C64 krNumOfMinorHatPageFaults | 1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.2 | Counter64 | read-only | The rate of number of minor page faults via hat_fault(). Number of minor page faults via hat_fault() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfMinorHatPageFaults = (Y - X)/(T2 - T1). |
| C64 krNumOfMinorAsPageFaults | 1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.3 | Counter64 | read-only | The rate of number of minor page faults via as_fault(). Number of minor page faults via as_fault() is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfMinorAsPageFaults = (Y - X)/(T2 - T1). |
| C64 krNumOfMajorPageFaults | 1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.4 | Counter64 | read-only | The rate of number of major page faults. Number of major page faults is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfMajorPageFaults = (Y - X)/(T2 - T1). |
| C64 krNumOfCopyOnWriteFaults | 1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.5 | Counter64 | read-only | The rate of number of copy-on-write faults. Number of copy-on-write faults is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfCopyOnWriteFaults = (Y - X)/(T2 - T1). |
| C64 krNumOfProtectionFaults | 1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.6 | Counter64 | read-only | The rate of number of protection faults. Number of protection faults is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfProtectionFaults = (Y - X)/(T2 - T1). |
| C64 krNumOfSWLockFaults | 1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.7 | Counter64 | read-only | The rate of number of faults due to software locking req. Number of faults is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfSWLockFaults = (Y - X)/(T2 - T1). |
| C64 krNumOfAsFaultsInKSpace | 1.3.6.1.4.1.42.2.12.2.2.12.5.9.1.1.8 | Counter64 | read-only | The rate of number of as_faults() in kernel addr space. Number of as_faults() in kernel addr space is calculated at different times which is either when refresh interval reaches or when the mannual refresh is issued. If at time T1 the value is X and at time T2 the value is Y then krNumOfAsFaultsInKSpace = (Y - X)/(T2 - T1). |
| krOverAllCPUStatistics | 1.3.6.1.4.1.42.2.12.2.2.12.5.10 | CPU utilization statistics. | ||
| STR krOverAllCpuStatsUtil | 1.3.6.1.4.1.42.2.12.2.2.12.5.10.1 | DisplayString | read-only | Total CPU Utilization in Percentage. |
| STR krOverAllCpuStatsIdle | 1.3.6.1.4.1.42.2.12.2.2.12.5.10.2 | DisplayString | read-only | IDLE time for CPU in Percentage. |
| krMemoryUsageGroup | 1.3.6.1.4.1.42.2.12.2.2.12.6 | Memory usage related statistics. | ||
| I32 krTotPhyMemAvail | 1.3.6.1.4.1.42.2.12.2.2.12.6.1 | Integer32 | read-only | Total physical memory available, in Mbytes. |
| I32 krPhyMemInUse | 1.3.6.1.4.1.42.2.12.2.2.12.6.2 | Integer32 | read-only | Total physical memory in use, in Mbytes. |
| STR krPctOfPhyMemInUse | 1.3.6.1.4.1.42.2.12.2.2.12.6.3 | DisplayString | read-only | Total percentage of physical memory in use. |
| I32 krFreePhyMem | 1.3.6.1.4.1.42.2.12.2.2.12.6.4 | Integer32 | read-only | Total amount of physical memory free, in Mbytes. |
| STR krPctOfPhyMemFree | 1.3.6.1.4.1.42.2.12.2.2.12.6.5 | DisplayString | read-only | Total percentage of physical memory free. |
| krSwapDetailGroup | 1.3.6.1.4.1.42.2.12.2.2.12.7 | Swap space detail related statistics. | ||
| I32 krTotSwapSpaceAvail | 1.3.6.1.4.1.42.2.12.2.2.12.7.1 | Integer32 | read-only | Total amount of swap space available, in Kbytes (total swap - reserved). |
| I32 krTotReservedSwapSpace | 1.3.6.1.4.1.42.2.12.2.2.12.7.2 | Integer32 | read-only | Total amount of swap space reserved, in Kbytes. |
| I32 krTotAllocatedSwapSpace | 1.3.6.1.4.1.42.2.12.2.2.12.7.3 | Integer32 | read-only | Total amount of swap space allocated, in Kbytes. |
| U32 krTotUsedSwapSpace | 1.3.6.1.4.1.42.2.12.2.2.12.7.4 | Unsigned32 | read-only | Total amount of swap space used, in Kbytes. |
| I32 krTotSwapSpace | 1.3.6.1.4.1.42.2.12.2.2.12.7.5 | Integer32 | read-only | Total amount of swap space. |
| STR krTotPctOfSwapSpaceUsed | 1.3.6.1.4.1.42.2.12.2.2.12.7.6 | DisplayString | read-only | Total percentage of swap space used. |
| krStreamsDetail | 1.3.6.1.4.1.42.2.12.2.2.12.8 | |||
| krStreamHeadCacheGroup | 1.3.6.1.4.1.42.2.12.2.2.12.8.1 | Stream head cache related statistics. | ||
| STR krStrHeadCacheName | 1.3.6.1.4.1.42.2.12.2.2.12.8.1.1 | DisplayString | read-only | The name of the streams head cache maintained by kernel. |
| I32 krStrHeadCacheCurrUsage | 1.3.6.1.4.1.42.2.12.2.2.12.8.1.2 | Integer32 | read-only | Current usage (total - avail) of streams head cache. |
| I32 krStrHeadCacheSize | 1.3.6.1.4.1.42.2.12.2.2.12.8.1.3 | Integer32 | read-only | Maximum capacity of streams head cache. |
| I32 krTotSHCacheAllocation | 1.3.6.1.4.1.42.2.12.2.2.12.8.1.4 | Integer32 | read-only | Number of total cache allocatios in streams head cache. |
| I32 krTotSHAllocFailures | 1.3.6.1.4.1.42.2.12.2.2.12.8.1.5 | Integer32 | read-only | Number of allocation failures in streams head cache. |
| STR krStrHeadCachePctUsed | 1.3.6.1.4.1.42.2.12.2.2.12.8.1.6 | DisplayString | read-only | Percentage of streams head cache used. |
| krQueueCacheGroup | 1.3.6.1.4.1.42.2.12.2.2.12.8.2 | Queue cache related statistics. | ||
| STR krQueueCacheName | 1.3.6.1.4.1.42.2.12.2.2.12.8.2.1 | DisplayString | read-only | The name of the queue cache maintained by kernel. |
| I32 krQueueCacheCurrUsage | 1.3.6.1.4.1.42.2.12.2.2.12.8.2.2 | Integer32 | read-only | Current usage (total - avail) of queue cache. |
| I32 krQueueCacheSize | 1.3.6.1.4.1.42.2.12.2.2.12.8.2.3 | Integer32 | read-only | Maximum capacity of the queue cache. |
| I32 krTotQCacheAllocation | 1.3.6.1.4.1.42.2.12.2.2.12.8.2.4 | Integer32 | read-only | Number of total queue cache allocations. |
| I32 krTotQAllocFailures | 1.3.6.1.4.1.42.2.12.2.2.12.8.2.5 | Integer32 | read-only | Number of allocation failures in queue cache. |
| STR krQueueCachePctUsed | 1.3.6.1.4.1.42.2.12.2.2.12.8.2.6 | DisplayString | read-only | Percentage of queue cache used. |
| krStreamsMsgGroup | 1.3.6.1.4.1.42.2.12.2.2.12.8.3 | Stream message related statistics. | ||
| STR krStrMsgCacheName | 1.3.6.1.4.1.42.2.12.2.2.12.8.3.1 | DisplayString | read-only | The name of the streams messages cache maintained by kernel. |
| I32 krStrMsgCacheCurrUsage | 1.3.6.1.4.1.42.2.12.2.2.12.8.3.2 | Integer32 | read-only | Current usage (total - avail) of streams messages cache. |
| I32 krStrMsgCacheSize | 1.3.6.1.4.1.42.2.12.2.2.12.8.3.3 | Integer32 | read-only | Maximum capacity of streams messages cache. |
| I32 krTotSMCacheAllocation | 1.3.6.1.4.1.42.2.12.2.2.12.8.3.4 | Integer32 | read-only | Number of total streams messages cache allocations. |
| I32 krTotSMAllocFailures | 1.3.6.1.4.1.42.2.12.2.2.12.8.3.5 | Integer32 | read-only | Number of allocation failures in streams messages cache. |
| STR krStrMsgCachePctUsed | 1.3.6.1.4.1.42.2.12.2.2.12.8.3.6 | DisplayString | read-only | Percentage of streams messages cache used. |
| krLinkinfoCacheGroup | 1.3.6.1.4.1.42.2.12.2.2.12.8.4 | Link info cache related statistics. | ||
| STR krLinkinfoCacheName | 1.3.6.1.4.1.42.2.12.2.2.12.8.4.1 | DisplayString | read-only | The name of the link information cache maintained by kernel. |
| I32 krLinkinfoCacheCurrUsage | 1.3.6.1.4.1.42.2.12.2.2.12.8.4.2 | Integer32 | read-only | Current usage (total - avail) of link information cache. |
| I32 krLinkinfoCacheSize | 1.3.6.1.4.1.42.2.12.2.2.12.8.4.3 | Integer32 | read-only | Maximum capacity of link information cache. |
| I32 krTotLICacheAllocation | 1.3.6.1.4.1.42.2.12.2.2.12.8.4.4 | Integer32 | read-only | Number of total allocations in link information cache. |
| I32 krTotLIAllocFailures | 1.3.6.1.4.1.42.2.12.2.2.12.8.4.5 | Integer32 | read-only | Number of allocation failures in link information cache. |
| STR krLinkinfoCachePctUsed | 1.3.6.1.4.1.42.2.12.2.2.12.8.4.6 | DisplayString | read-only | Percentage of link information cache used. |
| krStreventCacheGroup | 1.3.6.1.4.1.42.2.12.2.2.12.8.5 | Stream event cache related statistics. | ||
| STR krStrEventCacheName | 1.3.6.1.4.1.42.2.12.2.2.12.8.5.1 | DisplayString | read-only | The name of the streams event cache maintained by kernel. |
| I32 krStrEventCacheCurrUsage | 1.3.6.1.4.1.42.2.12.2.2.12.8.5.2 | Integer32 | read-only | Current usage (total - avail) of streams event cache. |
| I32 krStrEventCacheSize | 1.3.6.1.4.1.42.2.12.2.2.12.8.5.3 | Integer32 | read-only | Maximum capacity of streams event cache. |
| I32 krTotSECacheAllocation | 1.3.6.1.4.1.42.2.12.2.2.12.8.5.4 | Integer32 | read-only | Number of total allocations in streams event cache. |
| I32 krTotSEAllocFailures | 1.3.6.1.4.1.42.2.12.2.2.12.8.5.5 | Integer32 | read-only | Number of allocation failures in streams event cache. |
| STR krStrEventCachePctUsed | 1.3.6.1.4.1.42.2.12.2.2.12.8.5.6 | DisplayString | read-only | Percentage of streams event cache used. |
| krSyncqCacheGroup | 1.3.6.1.4.1.42.2.12.2.2.12.8.6 | Sync cache related statistics. | ||
| STR krSyncCacheName | 1.3.6.1.4.1.42.2.12.2.2.12.8.6.1 | DisplayString | read-only | The name of the syncq cache maintained by kernel. |
| I32 krSyncCacheCurrUsage | 1.3.6.1.4.1.42.2.12.2.2.12.8.6.2 | Integer32 | read-only | Current usage (total - avail) of syncq cache. |
| I32 krSyncCacheSize | 1.3.6.1.4.1.42.2.12.2.2.12.8.6.3 | Integer32 | read-only | Maximum capacity of syncq cache. |
| I32 krTotSyCacheAllocation | 1.3.6.1.4.1.42.2.12.2.2.12.8.6.4 | Integer32 | read-only | Number of total allocations in syncq cache. |
| I32 krTotSyAllocFailures | 1.3.6.1.4.1.42.2.12.2.2.12.8.6.5 | Integer32 | read-only | Number of allocation failures in syncq cache. |
| STR krSyncCachePctUsed | 1.3.6.1.4.1.42.2.12.2.2.12.8.6.6 | DisplayString | read-only | Percentage of syncq cache used. |
| krQbandCacheGroup | 1.3.6.1.4.1.42.2.12.2.2.12.8.7 | Qband cache related statistics. | ||
| STR krQbandCacheName | 1.3.6.1.4.1.42.2.12.2.2.12.8.7.1 | DisplayString | read-only | The name of the qband cache maintained by kernel. |
| I32 krQbandCacheCurrUsage | 1.3.6.1.4.1.42.2.12.2.2.12.8.7.2 | Integer32 | read-only | Current usage (total - avail) of qband cache. |
| I32 krQbandCacheSize | 1.3.6.1.4.1.42.2.12.2.2.12.8.7.3 | Integer32 | read-only | Maximum capacity of qband cache. |
| I32 krTotQBCacheAllocation | 1.3.6.1.4.1.42.2.12.2.2.12.8.7.4 | Integer32 | read-only | Number of total allocations in qband cache. |
| I32 krTotQBAllocFailures | 1.3.6.1.4.1.42.2.12.2.2.12.8.7.5 | Integer32 | read-only | Number of allocation failures in qband cache. |
| STR krQbandCachePctUsed | 1.3.6.1.4.1.42.2.12.2.2.12.8.7.6 | DisplayString | read-only | Percentage of qband cache used. |
| krIOErrorStatsGroup | 1.3.6.1.4.1.42.2.12.2.2.12.9 | IO error summary statistics. | ||
| krDeviceErrorTable | 1.3.6.1.4.1.42.2.12.2.2.12.9.1 | not-accessible | This table displays device error summary statistics. | |
| krDeviceErrorEntry | 1.3.6.1.4.1.42.2.12.2.2.12.9.1.1 | not-accessible | Error information for a particular device. | |
| STR krDevDevice | 1.3.6.1.4.1.42.2.12.2.2.12.9.1.1.1 | DisplayString | read-only | The name of the device. |
| I32 krDevSoftwareErrors | 1.3.6.1.4.1.42.2.12.2.2.12.9.1.1.2 | Integer32 | read-only | The number of software errors. |
| I32 krDevHardwareErrors | 1.3.6.1.4.1.42.2.12.2.2.12.9.1.1.3 | Integer32 | read-only | The number of hardware errors. |
| I32 krDevTransportErrors | 1.3.6.1.4.1.42.2.12.2.2.12.9.1.1.4 | Integer32 | read-only | The number of transport errors. |
| I32 krDevTotalErrors | 1.3.6.1.4.1.42.2.12.2.2.12.9.1.1.5 | Integer32 | read-only | Total number of errors for the device. |
| krTapeErrorTable | 1.3.6.1.4.1.42.2.12.2.2.12.9.2 | not-accessible | This table displays tape device error summary statistics. | |
| krTapeErrorEntry | 1.3.6.1.4.1.42.2.12.2.2.12.9.2.1 | not-accessible | Error information for a particular tape device. | |
| STR krTapeDevice | 1.3.6.1.4.1.42.2.12.2.2.12.9.2.1.1 | DisplayString | read-only | The name of the device. |
| I32 krTapeSoftwareErrors | 1.3.6.1.4.1.42.2.12.2.2.12.9.2.1.2 | Integer32 | read-only | The number of software errors. |
| I32 krTapeHardwareErrors | 1.3.6.1.4.1.42.2.12.2.2.12.9.2.1.3 | Integer32 | read-only | The number of hardware errors. |
| I32 krTapeTransportErrors | 1.3.6.1.4.1.42.2.12.2.2.12.9.2.1.4 | Integer32 | read-only | The number of transport errors. |
| I32 krTapeTotalErrors | 1.3.6.1.4.1.42.2.12.2.2.12.9.2.1.5 | Integer32 | read-only | The total number of errors for the tape device. |
| krKernelMemAllocGroup | 1.3.6.1.4.1.42.2.12.2.2.12.10 | Details kernel memory allocation (KMA) activities | ||
| I32 krSmallPoolMem | 1.3.6.1.4.1.42.2.12.2.2.12.10.1 | Integer32 | read-only | The amount of memory in bytes KMA has for the small pool (The reserve from which small space requests are catered. |
| I32 krSmallPoolMemAllocated | 1.3.6.1.4.1.42.2.12.2.2.12.10.2 | Integer32 | read-only | The number of bytes allocated to satisfy requests for small amounts of memory. |
| I32 krSmallPoolMemFailed | 1.3.6.1.4.1.42.2.12.2.2.12.10.3 | Integer32 | read-only | The number of requests for small amounts of memory that were not satisfied (failed). |
| I32 krLargePoolMem | 1.3.6.1.4.1.42.2.12.2.2.12.10.4 | Integer32 | read-only | The amount of memory in bytes KMA has for the large pool (The reserve from which large space requests are catered. |
| I32 krLargePoolMemAllocated | 1.3.6.1.4.1.42.2.12.2.2.12.10.5 | Integer32 | read-only | The number of bytes allocated to satisfy requests for large amounts of memory. |
| I32 krLargePoolMemFailed | 1.3.6.1.4.1.42.2.12.2.2.12.10.6 | Integer32 | read-only | The number of requests for large amounts of memory that were not satisfied (failed). |
| I32 krOversizeMem | 1.3.6.1.4.1.42.2.12.2.2.12.10.7 | Integer32 | read-only | The amount of memory in bytes allocated for over-size requests. |
| I32 krOversizeMemFailed | 1.3.6.1.4.1.42.2.12.2.2.12.10.8 | Integer32 | read-only | The number of oversize requests which could not be satisfied (failed) |
| krZoneList | 1.3.6.1.4.1.42.2.12.2.2.12.14 | Details about Zone staticstics. | ||
| krZoneListTable | 1.3.6.1.4.1.42.2.12.2.2.12.14.1 | not-accessible | MIB tree branch | |
| krZoneListEntry | 1.3.6.1.4.1.42.2.12.2.2.12.14.1.1 | not-accessible | MIB tree branch | |
| STR krZoneId | 1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.1 | DisplayString | read-only | Gives Zone Identification Number. |
| STR krZoneName | 1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.2 | DisplayString | read-only | Name of the zone. |
| STR krStatus | 1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.3 | DisplayString | read-only | Zone's Status. |
| STR krPath | 1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.4 | DisplayString | read-only | Logical PATH for the zone. |
| STR krIp | 1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.5 | DisplayString | read-only | Zone's IP address. |
| STR krAutoboot | 1.3.6.1.4.1.42.2.12.2.2.12.14.1.1.6 | DisplayString | read-only | Autoboot Status for the zone. |
RFC description
Reports system kernel metrics on Sun servers including CPU, disk, memory, and network I/O statistics.
Start monitoring Sun/Solaris server managed via Sun Management Center with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.