JUNIPER-IPv6-MIB :: jnxIcmpv6StatsInPktTooBigs

MIB Reference — IPNetwork Monitor · Updated October 06, 2026

All MIBs › JUNIPER-IPv6-MIB › jnxIcmpv6StatsInPktTooBigs

jnxIcmpv6StatsInPktTooBigs

Module: JUNIPER-IPv6-MIB

OID (symbolic): JUNIPER-IPv6-MIB::jnxIcmpv6StatsInPktTooBigs

OID (numeric): 1.3.6.1.4.1.2636.3.11.1.2.24

Node type: OBJECT-TYPE

Type: Counter64

Access: read-only

Description: The total number of 'Packet Too Big' messages received.

What is jnxIcmpv6StatsInPktTooBigs?

This Counter64 tracks ICMPv6 'Packet Too Big' messages received by the router, informing it that packets it sent exceeded a downstream link's MTU. The router uses these to drive its own IPv6 path-MTU discovery.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2636.3.11.1.2.24
snmpwalk -v2c -c public <target> JUNIPER-IPv6-MIB::jnxIcmpv6StatsInPktTooBigs

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2636.3.11.1.2.24.1
snmpget -v2c -c public <target> JUNIPER-IPv6-MIB::jnxIcmpv6StatsInPktTooBigs.1

Start monitoring Juniper Networks router/switch running IPv6 (JUNOS-based platform) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the JUNIPER-IPv6-MIB::jnxIcmpv6StatsInPktTooBigs OID value, configure state conditions and alerts, and monitor any Juniper Networks router/switch running IPv6 (JUNOS-based platform) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.2636juniperMIBJUNIPER-SMI
1.3.6.1.4.1.2636.3jnxMibsJUNIPER-SMI
Numeric OIDNameModule
1.3.6.1.4.1.2636.3.11jnxIpv6JUNIPER-IPv6-MIB
1.3.6.1.4.1.2636.3.11.1jnxIpv6StatsJUNIPER-IPv6-MIB
1.3.6.1.4.1.2636.3.11.1.2jnxIcmpv6GlobalStatsJUNIPER-IPv6-MIB
1.3.6.1.4.1.2636.3.11.1.2.24jnxIcmpv6StatsInPktTooBigsJUNIPER-IPv6-MIB