All MIBs › ISO3201-OPT-MIB
Category: Protocol: X.25
Description: ISO 3201 options MIB providing SNMP objects for X.25/ISO protocol optional parameter configuration and statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ISO3201-OPT-MIB?
ISO3201-OPT-MIB is a MIB related to ISO 3201/X.25 optional parameter configuration, appearing here in the context of Codex/cdx6500 station protocol groups for X.25/ISO protocol statistics. It exposes protocol-group objects tied to specific station types (e.g. PCT and PST station protocol groups) used to configure or report on X.25-related optional parameters. In a monitoring context, to the extent it exposes runtime data, it would be used to check which X.25 protocol options are active or negotiated on a given station interface, relevant to diagnosing X.25 link-layer compatibility issues rather than general hardware health. It is tied to the ISO 3201/X.25 protocol standard and to vendor-specific station definitions (cdx6500) rather than to common IETF device MIBs. It is typically deployed on legacy X.25 packet-switching equipment such as Codex/Motorola cdx6500-series data communications devices. Network engineers evaluating or troubleshooting this functionality can download the ISO3201-OPT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ISO3201-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Codex/Motorola cdx6500 X.25 data communications equipment
Monitoring Examples
The available objects, cdx6500PCTStationProtocolGroup and cdx6500PSTStationProtocolGroup, appear to be protocol-group container/grouping objects for PCT and PST station types rather than clearly enumerated runtime counters, so a detailed polling scenario with leaf-level anomalies cannot be honestly constructed from the available data. In general, an operator would inspect these groups to confirm which X.25 protocol options are configured/active for a given station. No further specific leaf object names can be confirmed.
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| enterprises |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| codex | 1.3.6.1.4.1.449 | |||
| cdxProductSpecific | 1.3.6.1.4.1.449.2 | |||
| cdx6500 | 1.3.6.1.4.1.449.2.1 | |||
| cdx6500Configuration | 1.3.6.1.4.1.449.2.1.2 | |||
| cdx6500CfgProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1 | |||
| cdx6500PCTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.1 | |||
| cdx6500PPCT3201PortTable | 1.3.6.1.4.1.449.2.1.2.1.1.28 | not-accessible | This table contains the 3201 Port configuration parameters. | |
| cdx6500PPCT3201PortEntry | 1.3.6.1.4.1.449.2.1.2.1.1.28.1 | not-accessible | Entries in the 3201 Port Configuration Table. | |
| INT iso3201PCfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.1 | INTEGER | read-only | Port number of the 3201 port. |
| INT iso3201PCfgPortType | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.2 | INTEGER | read-only | The Port Type of the port. |
| INT iso3201PCfgPortSpeed | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.3 | INTEGER | read-only | This specifies port speed in bits per second speed300 : 300 bits per second speed600 : 600 bits per second speed1200 : 1200 bits per second speed1800 : 1800 bits per second speed2400 : 2400 bits per second speed4800 : 4800 bits per second speed7200 : 7200 bits per second speed9600 : 9600 bits per second speed19200 : 19200 bits per second . |
| INT iso3201PCfgNoOfControllers | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.4 | INTEGER | read-only | This specifies the number of controllers on this line. |
| INT iso3201PCfgResponseTimeout | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.5 | INTEGER | read-only | This specifies the amount of time in 1/20th of a second that the PAD waits for a response from a controller. A value of 5 gives a response timeout of 250ms. |
| INT iso3201PCfgInterChrTimeout | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.6 | INTEGER | read-only | This specifies the maximum amount of time in 1/20 of a second that the PAD waits between two characters when receiving data from the attatched devices before detecting a line problem. A value of 2 gives an intercharacter timeout of 100ms. |
| INT iso3201PCfgNoOfRetries | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.7 | INTEGER | read-only | This specifies the retry limit for polls/selects sent, NAKs sent/received and ENQs sent/received. In case of polls and selects, the controller is placed in slow poll mode on reaching this limit. |
| INT iso3201PCfgNoOfConsecRetries | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.8 | INTEGER | read-only | This specifies the number of retries that will be made immediately in case of response timeout on Poll, response timeout on Select or NAK response to select. The next controller in the list will be polled/selected only after these many retries are made for the non-responding controller. All consecutive retries will be counted as one retry attempt. |
| INT iso3201PCfgSlowPollWaitCycle | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.9 | INTEGER | read-only | This specifies the number of poll cycles to active controllers before a poll is sent to one controller in the slow poll list. |
| INT iso3201PCfgElectricalInterfaceType | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.10 | INTEGER | read-only | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 - X.21 Electrical Interface Type NONE - Electrically disabled |
| INT iso3201PCfgV24ElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.11 | INTEGER | read-only | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| INT iso3201PCfgHighSpeedElectricalInterfaceOption | 1.3.6.1.4.1.449.2.1.2.1.1.28.1.12 | INTEGER | read-only | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| cdx6500PCTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.3 | |||
| cdx6500SPCT3201StnTable | 1.3.6.1.4.1.449.2.1.2.1.3.7 | not-accessible | This table contains the 3201 Station Configuration parameters. | |
| cdx6500SPCT3201StnEntry | 1.3.6.1.4.1.449.2.1.2.1.3.7.1 | not-accessible | Entries in the 3201 Station Configuration Table. | |
| INT iso3201SCfgPortNum | 1.3.6.1.4.1.449.2.1.2.1.3.7.1.1 | INTEGER | read-only | Port number of the 3201 port. |
| INT iso3201SCfgStnNum | 1.3.6.1.4.1.449.2.1.2.1.3.7.1.2 | INTEGER | read-only | Station number of the 3201 station. |
| STR iso3201SCfgControllerAddress | 1.3.6.1.4.1.449.2.1.2.1.3.7.1.3 | DisplayString | read-only | This specifies the address of this controller The valid addresses are : 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F. |
| STR iso3201SCfgAutocallMnemonic | 1.3.6.1.4.1.449.2.1.2.1.3.7.1.4 | DisplayString | read-only | This specifies the mnemonic used by the PAD to place calls to the Host for this controller. Host initiated calls will be accepted only if this field is blank. |
| INT iso3201SCfgAutocallTimeout | 1.3.6.1.4.1.449.2.1.2.1.3.7.1.5 | INTEGER | read-only | This specifies the time interval in seconds between call attempts. |
| INT iso3201SCfgMaxNoAutocallAttempts | 1.3.6.1.4.1.449.2.1.2.1.3.7.1.6 | INTEGER | read-only | This specifies the number of times autocall attempts will be made. A value of 0 will allow unlimited attempts. |
| STR iso3201SCfgX25Address | 1.3.6.1.4.1.449.2.1.2.1.3.7.1.7 | DisplayString | read-only | This specifies the X.25 address inserted in the calling address field of the call packet sent by the PAD to the Host. This address identifies the controller to the Host. |
| INT iso3201SCfgBillingRecords | 1.3.6.1.4.1.449.2.1.2.1.3.7.1.8 | INTEGER | read-only | This controls whether billing(accounting) records will be created for calls on this station billingDisabled : billing is disabled billingEnabled : billing is enabled . |
| cdx6500Statistics | 1.3.6.1.4.1.449.2.1.3 | |||
| cdx6500StatProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1 | |||
| cdx6500PSTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.1 | |||
| cdx6500PPST3201PStatsTable | 1.3.6.1.4.1.449.2.1.3.1.1.29 | not-accessible | This table contains 3201 Port Statistics parameters. | |
| cdx6500PPST3201PStatsEntry | 1.3.6.1.4.1.449.2.1.3.1.1.29.1 | not-accessible | Entries in the 3201 Port Statistics Table. | |
| INT iso3201PStatsPortNum | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.1 | INTEGER | read-only | Port Number of the 3201 Port. |
| INT iso3201PStatsPortStatus | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.2 | INTEGER | read-only | This indicates the operational status of the port up : port is enabled disabled : port is disabled . |
| INT iso3201PStatsPortType | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.3 | INTEGER | read-only | This indicates the type of access protocol for this port. |
| INT iso3201PStatsPortSpeed | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.4 | INTEGER | read-only | This specifies port speed in bits per second speed300 : 300 bits per second speed600 : 600 bits per second speed1200 : 1200 bits per second speed1800 : 1800 bits per second speed2400 : 2400 bits per second speed4800 : 4800 bits per second speed7200 : 7200 bits per second speed9600 : 9600 bits per second speed19200 : 19200 bits per second . |
| INT iso3201PStatsPortUtilIn | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.5 | INTEGER | read-only | This indicates the port utilization for the line to port direction. |
| INT iso3201PStatsPortUtilOut | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.6 | INTEGER | read-only | This indicates the port utilization for the port to line direction. |
| INT iso3201PStatsLineStatus | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.7 | INTEGER | read-only | This indicates the line status : up : if one or more controllers are responding to polls down : if no controllers are responding or garbage is being received. |
| CTR iso3201PStatsTxChrs | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.8 | Counter | read-only | This specifies the number of characters transmitted. |
| CTR iso3201PStatsTxMsgs | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.9 | Counter | read-only | This specifies the number of data messages transmitted. |
| CTR iso3201PStatsTxPolls | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.10 | Counter | read-only | This specifies the number of polls transmitted. |
| CTR iso3201PStatsTxSelects | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.11 | Counter | read-only | This specifies the number of selects transmitted. |
| CTR iso3201PStatsTxACKs | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.12 | Counter | read-only | This specifies the number of data messages for which ACKs were transmitted. |
| CTR iso3201PStatsTxNAKs | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.13 | Counter | read-only | This specifies the number of messages for which NAKs were transmitted. |
| CTR iso3201PStatsTxENQs | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.14 | Counter | read-only | This specifies the number of ENQs transmitted. |
| CTR iso3201PStatsRxChrs | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.15 | Counter | read-only | This specifies the number of characters received. |
| CTR iso3201PStatsRxMsgs | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.16 | Counter | read-only | This specifies the number of data messages received. |
| CTR iso3201PStatsRxACKs | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.17 | Counter | read-only | This specifies the number of data messages for which ACKs were received. |
| CTR iso3201PStatsRxNAKs | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.18 | Counter | read-only | This specifies the number of messages for which NAKs were received. |
| CTR iso3201PStatsRxENQs | 1.3.6.1.4.1.449.2.1.3.1.1.29.1.19 | Counter | read-only | This specifies the number of ENQs received. |
| cdx6500PSTStationProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.3 | |||
| cdx6500SPST3201StnTable | 1.3.6.1.4.1.449.2.1.3.1.3.6 | |||
| cdx6500SPST3201SStatsTable | 1.3.6.1.4.1.449.2.1.3.1.3.6.1 | not-accessible | This table contains 3201 Station statistics parameters. | |
| cdx6500SPST3201StnEntry | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1 | not-accessible | Entries in the 3201 Station statistics table. | |
| INT iso3201SStatsPortNum | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.1 | INTEGER | read-only | Port number of the 3201 port. |
| INT iso3201SStatsStnNum | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.2 | INTEGER | read-only | Station number of the 3201 station. |
| STR iso3201SStatsControllerAddress | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.3 | DisplayString | read-only | This specifies the address of this controller The valid addresses are : 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x2B, 0x2C, 0x2D, 0x2E, 0x2F, 0x40, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x4B, 0x4C, 0x4D, 0x4E, 0x4F, 0x60, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, 0x6A, 0x6B, 0x6C, 0x6D, 0x6E, 0x6F. |
| INT iso3201SStatsStnState | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.4 | INTEGER | read-only | This indicates the current state of the station up : when responding to polls down : when tries have expired and controller is in slow poll suspended : when polling has been stopped by host blocked : when polling has been stopped because the X.25 channel is blocked disabled : when station is disabled. |
| INT iso3201SStatsCurrentStatus | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.5 | INTEGER | read-only | This gives information regarding the calls placed by this station on its host. calling : when it is waiting call accept from the host connected : when the connection to the host has been accepted idle : when connection attempts are not in progress (no data to send to the Host), or autocall attempts have been exhausted or when it is waiting for autocall timeout (to send call request again). |
| GAU iso3201SStatsNoOfAutocallAttmpts | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.6 | Gauge | read-only | This indicates the number of attempts made to establish connection to the host. This is reset to 0 when a connection is established. |
| INT iso3201SStatsNxtAutocallAttmpt | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.7 | INTEGER | read-only | This indicates the time (in seconds ) after which the station will place autocall to the host. |
| STR iso3201SStatsLastClearCauseCode | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.8 | DisplayString | read-only | Last autocall clear cause code. |
| STR iso3201SStatsLastClearDiagCode | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.9 | DisplayString | read-only | Last clear diagnostic code. |
| STR iso3201SStatsLastInCalledAddress | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.10 | DisplayString | read-only | This indicates the called address in the last inbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last incoming call packet is not present. |
| STR iso3201SStatsLastInCallingAddress | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.11 | DisplayString | read-only | This indicates the calling address in the last inbound request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last incoming call packet is not present. |
| STR iso3201SStatsLastInCallFacilities | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.12 | DisplayString | read-only | This indicates the facilities in the last inbound request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last incoming call packet is not present. |
| STR iso3201SStatsLastInCallCUD | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.13 | DisplayString | read-only | This indicates the data in the Call User Data field in the last inbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the incoming call packet is not present. |
| STR iso3201SStatsLastOutCalledAddress | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.14 | DisplayString | read-only | This indicates the called address in the last outbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last outgoing call packet is not present. |
| STR iso3201SStatsLastOutCallingAddress | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.15 | DisplayString | read-only | This indicates the calling address in the last outbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last outgoing call packet is not present. |
| STR iso3201SStatsLastOutCallFacilities | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.16 | DisplayString | read-only | This indicates the facilities in the last outbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last outgoing call packet is not present. |
| STR iso3201SStatsLastOutCallCUD | 1.3.6.1.4.1.449.2.1.3.1.3.6.1.1.17 | DisplayString | read-only | This indicates the data in the Call User Data field in the last outbound call request packet sent by this station. A value of 'Last Call Information not available' will be returned if the last call outgoing packet is not present. |
| cdx6500SPST3201PktSummTable | 1.3.6.1.4.1.449.2.1.3.1.3.6.2 | not-accessible | This table contains the Packet Summary statistics parameters. | |
| cdx6500SPST3201PktSummEntry | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1 | not-accessible | Entries in the Packet Summary statistics table. | |
| INT iso3201SStatsPktSummPortNum | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.1 | INTEGER | read-only | This specifies the physical port number . |
| INT iso3201SStatsPktSummStnNum | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.2 | INTEGER | read-only | This specifies the entry number of this station. |
| CTR iso3201SStatsTxData | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.3 | Counter | read-only | This specifies the count of data packets transmitted. |
| CTR iso3201SStatsTxCallRequest | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.4 | Counter | read-only | This specifies the count of call request packets transmitted. |
| CTR iso3201SStatsTxCallAccept | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.5 | Counter | read-only | This specifies the count of call accept packets transmitted. |
| CTR iso3201SStatsTxClearRequest | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.6 | Counter | read-only | This specifies the count of clear request packets transmitted. |
| CTR iso3201SStatsTxClearConfirm | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.7 | Counter | read-only | This specifies the count of clear confirm packets transmitted. |
| CTR iso3201SStatsTxResetRequest | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.8 | Counter | read-only | This specifies the count of reset request packets transmitted. |
| CTR iso3201SStatsTxResetConfirm | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.9 | Counter | read-only | This specifies the count of reset confirm packets transmitted. |
| GAU iso3201SStatsTxWindowClosed | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.10 | Gauge | read-only | The 'Transmit Window Closed' counts the number of times the 3201 station could not send data to the adjacent channel because of flow control. |
| CTR iso3201SStatsRxData | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.11 | Counter | read-only | This specifies the count of data packets received. |
| CTR iso3201SStatsRxCallRequest | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.12 | Counter | read-only | This specifies the count of call request packets received. |
| CTR iso3201SStatsRxCallAccept | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.13 | Counter | read-only | This specifies the count of call accept packets received. |
| CTR iso3201SStatsRxClearRequest | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.14 | Counter | read-only | This specifies the count of clear request packets received. |
| CTR iso3201SStatsRxClearConfirm | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.15 | Counter | read-only | This specifies the count of clear confirm packets received. |
| CTR iso3201SStatsRxResetRequest | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.16 | Counter | read-only | This specifies the count of reset request packets received. |
| CTR iso3201SStatsRxResetConfirm | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.17 | Counter | read-only | This specifies the count of reset confirm packets received. |
| GAU iso3201SStatsRxWindowClosed | 1.3.6.1.4.1.449.2.1.3.1.3.6.2.1.18 | Gauge | read-only | The 'Receive Window Closed' is incremented every time the 3201 station removes data out of its queue towards the terminal and the number of messages queued is greater than 15. |
| cdx6500SPST3201SummTable | 1.3.6.1.4.1.449.2.1.3.1.3.6.3 | not-accessible | This table contains the 3201 summary statistics parameters. | |
| cdx6500SPST3201SummEntry | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1 | not-accessible | Entries in the 3201 Summary statistics table. | |
| INT iso3201SStatsSummPortNum | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.1 | INTEGER | read-only | This specifies the physical port number. |
| INT iso3201SStatsSummStnNum | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.2 | INTEGER | read-only | This specifies the entry number of this station. |
| CTR iso3201SStatsTxPolls | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.3 | Counter | read-only | This indicates the number of polls transmitted to this controller. |
| CTR iso3201SStatsTxSelects | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.4 | Counter | read-only | This indicates the number of selects transmitted to this controller. |
| CTR iso3201SStatsTxDataBytes | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.5 | Counter | read-only | This indicates the number of data bytes transmitted. |
| GAU iso3201SStatsTxDataMsgs | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.6 | Gauge | read-only | This specifies the number of data messages transmitted. |
| CTR iso3201SStatsTxDataMsgsPerHour | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.7 | Counter | read-only | This specifies the number of data messages transmitted per hour. |
| CTR iso3201SStatsTxAvgMsgLength | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.8 | Counter | read-only | This indicates the average length of data messages transmitted. |
| GAU iso3201SStatsTxMsgsNAKed | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.9 | Gauge | read-only | This specifies the number of data messages for which NAKs were transmitted. |
| CTR iso3201SStatsTxSelectRetryExhausted | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.10 | Counter | read-only | This indicates the number of selects to this controller for which all attempts failed. |
| CTR iso3201SStatsTxNAKRetryExhausted | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.11 | Counter | read-only | This indicates the number of times the NAK sent retry limit was crossed. |
| GAU iso3201SStatsTxENQs | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.12 | Gauge | read-only | This specifies the number of ENQs transmitted. |
| CTR iso3201SStatsTxENQRetryExhausted | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.13 | Counter | read-only | This specifies the number of times the ENQ sent retry limit was crossed. |
| GAU iso3201SStatsTxPollingSuspendedByHost | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.14 | Gauge | read-only | This specifies the number of times polling was suspended on account of receiving an interrupt packet from the host. |
| CTR iso3201SStatsRxDataBytes | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.15 | Counter | read-only | This indicates the number of data bytes received. |
| GAU iso3201SStatsRxDataMsgs | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.16 | Gauge | read-only | This specifies the number of data messages received. |
| CTR iso3201SStatsRxDataMsgsPerHour | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.17 | Counter | read-only | This specifies the number of data messages received per hour. |
| CTR iso3201SStatsRxAvgMsgLength | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.18 | Counter | read-only | This indicates the average length of data messages received. |
| GAU iso3201SStatsRxMsgsNAKed | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.19 | Gauge | read-only | This specifies the number of data messages for which NAKs were received. |
| GAU iso3201SStatsRxMsgsAborted | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.20 | Gauge | read-only | This specifies the number of data messages to the controller for which were aborted by the controller (by sending EOT). |
| GAU iso3201SStatsRxSelectsNAKed | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.21 | Gauge | read-only | This specifies the number of selects for which NAKs were received by the controller. |
| CTR iso3201SStatsRxInvRespToSelect | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.22 | Counter | read-only | This indicates the number of selects for which an invalid response was received. |
| CTR iso3201SStatsRxNAKRetryExhausted | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.23 | Counter | read-only | This indicates the number of times the NAK received retry limit was crossed. |
| GAU iso3201SStatsRxENQs | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.24 | Gauge | read-only | This indicates the number of ENQs received. |
| CTR iso3201SStatsRxENQRetryExhausted | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.25 | Counter | read-only | This indicates the number of times the ENQ received retry limit was crossed. |
| CTR iso3201SStatsRxInterChrTimeout | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.26 | Counter | read-only | This indicates the number of times intercharacter timeout occurred while receiving data from the controller . |
| GAU iso3201SStatsRxPollTimeout | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.27 | Gauge | read-only | This specifies the number of times the controller did not respond to poll before response timeout . |
| GAU iso3201SStatsRxSelectTimeout | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.28 | Gauge | read-only | This indicates the number of times the controller did not respond to select before response timeout. |
| CTR iso3201SStatsRxReceiveTimeout | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.29 | Counter | read-only | This indicates the number of times the controller did not respond to a ACK before response timeout and the number of times the inter-character timer expired when receiving response to a NAK. |
| GAU iso3201SStatsRxParityErrorsOnCntrl | 1.3.6.1.4.1.449.2.1.3.1.3.6.3.1.30 | Gauge | read-only | This specifies the number of times the PAD detected a parity error on the control characters ACK, DLE, NAK, ENQ, EOT, ETX, SOH, STX. |
| cdx6500Controls | 1.3.6.1.4.1.449.2.1.4 | |||
| cdx6500Cont3201Table | 1.3.6.1.4.1.449.2.1.4.11 | |||
| cdx6500Cont3201PortTable | 1.3.6.1.4.1.449.2.1.4.11.1 | not-accessible | This table contains the 3201 Port Control parameters. | |
| cdx6500Cont3201PortEntry | 1.3.6.1.4.1.449.2.1.4.11.1.1 | not-accessible | Entries in the 3201 Port control Table. | |
| INT iso3201PContPortNum | 1.3.6.1.4.1.449.2.1.4.11.1.1.1 | INTEGER | not-accessible | 3201 port number . |
| INT iso3201ContPortBoot | 1.3.6.1.4.1.449.2.1.4.11.1.1.2 | INTEGER | write-only | Boots the specified 3201 port. boot : Boot the port noBoot : Do not boot the port. |
| INT iso3201ContPortEnable | 1.3.6.1.4.1.449.2.1.4.11.1.1.3 | INTEGER | write-only | Enables the specified 3201 Port. enable : Enable the Port noEnable : Do not enable the port. |
| INT iso3201ContPortDisable | 1.3.6.1.4.1.449.2.1.4.11.1.1.4 | INTEGER | write-only | Disables the specified 3201 Port. disable : Disable Port noDisable : Do not disable Port. |
| INT iso3201ContPortResetStats | 1.3.6.1.4.1.449.2.1.4.11.1.1.5 | INTEGER | write-only | Reset statistics for the specified 3201 Port reset : Reset port statistics noReset : Do not reset port statistics. |
| cdx6500Cont3201StnTable | 1.3.6.1.4.1.449.2.1.4.11.2 | not-accessible | This table contains the 3201 Station Control parameters. | |
| cdx6500Cont3201StnEntry | 1.3.6.1.4.1.449.2.1.4.11.2.1 | not-accessible | Entries in the 3201 Station Control Table. | |
| INT iso3201SContPortNum | 1.3.6.1.4.1.449.2.1.4.11.2.1.1 | INTEGER | not-accessible | 3201 port number. |
| INT iso3201ContStnNum | 1.3.6.1.4.1.449.2.1.4.11.2.1.2 | INTEGER | not-accessible | 3201 station number. |
| INT iso3201ContStnBoot | 1.3.6.1.4.1.449.2.1.4.11.2.1.3 | INTEGER | write-only | Boots the secified 3201 station. boot : Boot the station noBoot : Do not boot Station. |
| INT iso3201ContStnEnable | 1.3.6.1.4.1.449.2.1.4.11.2.1.4 | INTEGER | write-only | Enables the specified 3201 station enable : Enable station noEnable : Do not enable station. |
| INT iso3201ContStnDisable | 1.3.6.1.4.1.449.2.1.4.11.2.1.5 | INTEGER | write-only | Disables the specified 3201 Station disable : Disable Station noDisable : Do not disable Station. |
| INT iso3201ContStnResetStats | 1.3.6.1.4.1.449.2.1.4.11.2.1.6 | INTEGER | write-only | Reset statistics for the specified 3201 station reset : Reset station statistics noReset : Do not reset station statistics. |
RFC description
Codex 6500 CDP-3201 port configuration and statistics MIB for proprietary data communication equipment monitoring.
Start monitoring Codex/Motorola cdx6500 X.25 data communications equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.