INTELETHERNETLANADAPTERS-MIB

All MIBs › INTELETHERNETLANADAPTERS-MIB

Description: INTELETHERNETLANADAPTERS-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is INTELETHERNETLANADAPTERS-MIB?

INTELETHERNETLANADAPTERS-MIB is an Intel enterprise MIB for managing Intel Ethernet LAN network interface cards (NICs) installed in a host system. It exposes hardware identification data -- manufacturer, product name, hardware version, and serial number -- alongside adapter installation/verification status and installed driver software information (driver index and driver software name). It is used to monitor the hardware and software identity/health of a NIC -- confirming a card's version and serial number, verifying successful installation, and tracking which driver software is currently loaded -- serving as an asset-inventory and driver-status tool rather than exposing traffic statistics. No specific dependency on other standard MIBs is evident, though it likely complements the standard IF-MIB for interface-level counters. It is typically deployed on servers or workstations with Intel Ethernet adapters where IT asset-management tools track NIC hardware inventory and driver versions. Engineers can download the INTELETHERNETLANADAPTERS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in INTELETHERNETLANADAPTERS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Intel Ethernet LAN network interface cards (NICs)
servers/workstations with Intel NICs

Monitoring Examples

An admin could poll a1Manufacturer, a1Product, a1Version, and a1SerialNumber to build an inventory record for each installed Intel adapter, then check a1Installation and a1Verify to confirm the card passed installation self-test. Walking tNetworkAdapterDriverGroup/eNetworkAdapterDriverGroup entries with a2DriverIndex and a2DriverSoftwareName shows which driver is bound to each adapter, letting an admin detect an out-of-date or unexpected driver version across a fleet of machines.

What Can Be Monitored

adapter manufacturer/product identity
hardware version
serial number
installation/verification status
installed driver software name
driver index

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
intel	1.3.6.1.4.1.343
products	1.3.6.1.4.1.343.2
nic_products	1.3.6.1.4.1.343.2.7
intelnic	1.3.6.1.4.1.343.2.7.1
dmtfGroups	1.3.6.1.4.1.343.2.7.1.1
tComponentid	1.3.6.1.4.1.343.2.7.1.1.1		not-accessible	This group defines the attributes common to all components. This group is required.
eComponentid	1.3.6.1.4.1.343.2.7.1.1.1.1		not-accessible
STR a1Manufacturer	1.3.6.1.4.1.343.2.7.1.1.1.1.1	DmiDisplaystring	read-only	Manufacturer of this system.
STR a1Product	1.3.6.1.4.1.343.2.7.1.1.1.1.2	DmiDisplaystring	read-only	Product name for this system.
STR a1Version	1.3.6.1.4.1.343.2.7.1.1.1.1.3	DmiDisplaystring	read-only	Version number of this system.
STR a1SerialNumber	1.3.6.1.4.1.343.2.7.1.1.1.1.4	DmiDisplaystring	read-only	Serial number for this system.
DMI a1Installation	1.3.6.1.4.1.343.2.7.1.1.1.1.5	DmiDateX	read-only	The time and date when this component was installed.
INT a1Verify	1.3.6.1.4.1.343.2.7.1.1.1.1.6	INTEGER	read-only	A code that provides a level of verification that the component is still installed and working.
tNetworkAdapterDriverGroup	1.3.6.1.4.1.343.2.7.1.1.2		not-accessible
eNetworkAdapterDriverGroup	1.3.6.1.4.1.343.2.7.1.1.2.1		not-accessible
NUM a2DriverIndex	1.3.6.1.4.1.343.2.7.1.1.2.1.1	DmiInteger	read-only
STR a2DriverSoftwareName	1.3.6.1.4.1.343.2.7.1.1.2.1.2	DmiDisplaystring	read-only
STR a2DriverSoftwareVersion	1.3.6.1.4.1.343.2.7.1.1.2.1.3	DmiDisplaystring	read-only
STR a2DriverSoftwareDescription	1.3.6.1.4.1.343.2.7.1.1.2.1.4	DmiDisplaystring	read-only
NUM a2DriverSize	1.3.6.1.4.1.343.2.7.1.1.2.1.5	DmiInteger	not-accessible
INT a2DriverInterfaceType	1.3.6.1.4.1.343.2.7.1.1.2.1.6	INTEGER	read-only
STR a2DriverInterfaceVersion	1.3.6.1.4.1.343.2.7.1.1.2.1.7	DmiDisplaystring	read-only
STR a2DriverInterfaceDescription	1.3.6.1.4.1.343.2.7.1.1.2.1.8	DmiDisplaystring	read-only
tNetworkAdapter802PortGroup	1.3.6.1.4.1.343.2.7.1.1.3		not-accessible
eNetworkAdapter802PortGroup	1.3.6.1.4.1.343.2.7.1.1.3.1		not-accessible
NUM a3PortIndex	1.3.6.1.4.1.343.2.7.1.1.3.1.1	DmiInteger	read-only
STR a3PermanentNetworkAddress	1.3.6.1.4.1.343.2.7.1.1.3.1.2	DmiDisplaystring	read-only
STR a3CurrentNetworkAddress	1.3.6.1.4.1.343.2.7.1.1.3.1.3	DmiDisplaystring	read-only
INT a3ConnectorType	1.3.6.1.4.1.343.2.7.1.1.3.1.4	INTEGER	not-accessible
NUM a3DataRate	1.3.6.1.4.1.343.2.7.1.1.3.1.5	DmiInteger	read-only
NUM a3TotalPacketsTransmitted	1.3.6.1.4.1.343.2.7.1.1.3.1.6	DmiCounter64X	read-only
NUM a3TotalBytesTransmitted	1.3.6.1.4.1.343.2.7.1.1.3.1.7	DmiCounter64X	not-accessible
NUM a3TotalPacketsReceived	1.3.6.1.4.1.343.2.7.1.1.3.1.8	DmiCounter64X	read-only
NUM a3TotalBytesReceived	1.3.6.1.4.1.343.2.7.1.1.3.1.9	DmiCounter64X	not-accessible
NUM a3TotalTransmitErrors	1.3.6.1.4.1.343.2.7.1.1.3.1.10	DmiCounter64X	read-only
NUM a3TotalReceiveErrors	1.3.6.1.4.1.343.2.7.1.1.3.1.11	DmiCounter64X	read-only
NUM a3TotalHostErrors	1.3.6.1.4.1.343.2.7.1.1.3.1.12	DmiCounter64X	read-only
NUM a3TotalWireErrors	1.3.6.1.4.1.343.2.7.1.1.3.1.13	DmiCounter64X	read-only
tIntelNetworkAdapterInstrumentationGroup	1.3.6.1.4.1.343.2.7.1.1.4		not-accessible
eIntelNetworkAdapterInstrumentationGroup	1.3.6.1.4.1.343.2.7.1.1.4.1		not-accessible
NUM a4MifId	1.3.6.1.4.1.343.2.7.1.1.4.1.1	DmiInteger	read-only
STR a4Version	1.3.6.1.4.1.343.2.7.1.1.4.1.2	DmiDisplaystring	read-only
tIntelNetworkAdapterDriverExtensionsGrou	1.3.6.1.4.1.343.2.7.1.1.5		not-accessible
eIntelNetworkAdapterDriverExtensionsGrou	1.3.6.1.4.1.343.2.7.1.1.5.1		not-accessible
NUM a5Index	1.3.6.1.4.1.343.2.7.1.1.5.1.1	DmiInteger	read-only
STR a5DriverFilePath	1.3.6.1.4.1.343.2.7.1.1.5.1.2	DmiDisplaystring	read-only
STR a5DriverFileDate	1.3.6.1.4.1.343.2.7.1.1.5.1.3	DmiDisplaystring	read-only
tIntelEther_likeGroup	1.3.6.1.4.1.343.2.7.1.1.6		not-accessible
eIntelEther_likeGroup	1.3.6.1.4.1.343.2.7.1.1.6.1		not-accessible
NUM a6Index	1.3.6.1.4.1.343.2.7.1.1.6.1.1	DmiInteger	read-only
NUM a6AlignmentErrors	1.3.6.1.4.1.343.2.7.1.1.6.1.2	DmiCounter64X	read-only
NUM a6FcsErrors	1.3.6.1.4.1.343.2.7.1.1.6.1.3	DmiCounter64X	read-only
NUM a6SingleCollisionFrames	1.3.6.1.4.1.343.2.7.1.1.6.1.4	DmiCounter64X	read-only
NUM a6MultipleCollisionFrames	1.3.6.1.4.1.343.2.7.1.1.6.1.5	DmiCounter64X	read-only
NUM a6SqeTestErrors	1.3.6.1.4.1.343.2.7.1.1.6.1.6	DmiCounter64X	read-only
NUM a6DeferredTransmissions	1.3.6.1.4.1.343.2.7.1.1.6.1.7	DmiCounter64X	read-only
NUM a6LateCollisions	1.3.6.1.4.1.343.2.7.1.1.6.1.8	DmiCounter64X	read-only
NUM a6ExcessiveCollisions	1.3.6.1.4.1.343.2.7.1.1.6.1.9	DmiCounter64X	read-only
NUM a6InternalMacTransmitErrors	1.3.6.1.4.1.343.2.7.1.1.6.1.10	DmiCounter64X	read-only
NUM a6CarrierSenseErrors	1.3.6.1.4.1.343.2.7.1.1.6.1.11	DmiCounter64X	read-only
NUM a6FrameTooLongs	1.3.6.1.4.1.343.2.7.1.1.6.1.12	DmiCounter64X	read-only
NUM a6InternalMacReceiveErrors	1.3.6.1.4.1.343.2.7.1.1.6.1.13	DmiCounter64X	read-only
STR a6Etherchipset	1.3.6.1.4.1.343.2.7.1.1.6.1.14	DmiDisplaystring	read-only
tIntelVlanGroup	1.3.6.1.4.1.343.2.7.1.1.7		not-accessible
eIntelVlanGroup	1.3.6.1.4.1.343.2.7.1.1.7.1		not-accessible
NUM a7VlanId	1.3.6.1.4.1.343.2.7.1.1.7.1.1	DmiInteger	read-only
STR a7VlanName	1.3.6.1.4.1.343.2.7.1.1.7.1.2	DmiDisplaystring	read-only
INT a7TypeOfVlan	1.3.6.1.4.1.343.2.7.1.1.7.1.3	INTEGER	read-only
tNicHealthContributor	1.3.6.1.4.1.343.2.7.1.1.8		not-accessible	This group defines various attributes for the NIC Generated Events.
eNicHealthContributor	1.3.6.1.4.1.343.2.7.1.1.8.1		not-accessible
NTF trap1NicHealthContributor	1.3.6.1.4.1.343.2.7.1.1.8.1.0.1			Cable unplugged/No LAN activity
NTF trap2NicHealthContributor	1.3.6.1.4.1.343.2.7.1.1.8.1.0.2			Adapter initialization failure
INT a8EventType	1.3.6.1.4.1.343.2.7.1.1.8.1.1	INTEGER	read-only	The type of event that has occurred.
NUM a8DeviceNumber	1.3.6.1.4.1.343.2.7.1.1.8.1.2	DmiInteger	read-only
INT a8EventSolution	1.3.6.1.4.1.343.2.7.1.1.8.1.3	INTEGER	read-only	A solution to the problem that caused the event.
STR a8DeviceInstance	1.3.6.1.4.1.343.2.7.1.1.8.1.4	DmiDisplaystring	read-only	Name of the instance of the Device
tEventGenerationNic	1.3.6.1.4.1.343.2.7.1.1.9		not-accessible
eEventGenerationNic	1.3.6.1.4.1.343.2.7.1.1.9.1		not-accessible
INT a9EventType	1.3.6.1.4.1.343.2.7.1.1.9.1.1	INTEGER	read-only	The type of event that has occurred.
INT a9EventSeverity	1.3.6.1.4.1.343.2.7.1.1.9.1.2	INTEGER	read-only	The severity of this event.
INT a9IsEventStateBased	1.3.6.1.4.1.343.2.7.1.1.9.1.3	INTEGER	read-only	The value of this attribute determines whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Otherwise the Event is not state-based.
NUM a9EventStateKey	1.3.6.1.4.1.343.2.7.1.1.9.1.4	DmiInteger	read-only	A unique, single integer key into the Event State group if this is a state-based Event. If this is not a state-based Event then this this attribute's value is not defined.
STR a9AssociatedGroup	1.3.6.1.4.1.343.2.7.1.1.9.1.5	DmiDisplaystring	read-only	The class name of the group that is associated with the events defined in this Event Generation group.
INT a9EventSystem	1.3.6.1.4.1.343.2.7.1.1.9.1.6	INTEGER	read-only	The major functional aspect of the product causing the fault.
INT a9EventSubsystem	1.3.6.1.4.1.343.2.7.1.1.9.1.7	INTEGER	read-only	The minor functional aspect of the product causing the fault.
tTeamingEventsGroup	1.3.6.1.4.1.343.2.7.1.1.10		not-accessible	This group defines various attributes for the Teaming Generated Events.
eTeamingEventsGroup	1.3.6.1.4.1.343.2.7.1.1.10.1		not-accessible
NTF trap1NicTeamingEvents	1.3.6.1.4.1.343.2.7.1.1.10.1.0.1			The primary Adapter is switching over and the Secondary Adapter took over
NTF trap2NicTeamingEvents	1.3.6.1.4.1.343.2.7.1.1.10.1.0.2			The Primary Adapter became active
NTF trap3NicTeamingEvents	1.3.6.1.4.1.343.2.7.1.1.10.1.0.3			Secondary Adapter is deactivated from the team
NTF trap4NicTeamingEvents	1.3.6.1.4.1.343.2.7.1.1.10.1.0.4			The last Adapter has lost link. Network connection has been lost
NTF trap5NicTeamingEvents	1.3.6.1.4.1.343.2.7.1.1.10.1.0.5			Preferred Primary Adapter has been detected
NTF trap6NicTeamingEvents	1.3.6.1.4.1.343.2.7.1.1.10.1.0.6			The team only has one active adapter
NTF trap7NicTeamingEvents	1.3.6.1.4.1.343.2.7.1.1.10.1.0.7			The Secondary adapter has re-joined the team
NTF trap8NicTeamingEvents	1.3.6.1.4.1.343.2.7.1.1.10.1.0.8			Preferred Primary Adapter has taken over
NTF trap9NicTeamingEvents	1.3.6.1.4.1.343.2.7.1.1.10.1.0.9			Network Connection restored
NUM a10TeamId	1.3.6.1.4.1.343.2.7.1.1.10.1.1	DmiInteger	read-only	The ID of the Team where event occurs.
INT a10EventType	1.3.6.1.4.1.343.2.7.1.1.10.1.2	INTEGER	read-only	The type of event that has occurred.
INT a10TeamMode	1.3.6.1.4.1.343.2.7.1.1.10.1.3	INTEGER	read-only	The configuration mode of the team
NUM a10TeamSize	1.3.6.1.4.1.343.2.7.1.1.10.1.4	DmiInteger	read-only	Total number of adapters in the team
tEventGenerationTeaming	1.3.6.1.4.1.343.2.7.1.1.11		not-accessible
eEventGenerationTeaming	1.3.6.1.4.1.343.2.7.1.1.11.1		not-accessible
INT a11EventType	1.3.6.1.4.1.343.2.7.1.1.11.1.1	INTEGER	read-only	The type of event that has occurred.
INT a11EventSeverity	1.3.6.1.4.1.343.2.7.1.1.11.1.2	INTEGER	read-only	The severity of this event.
INT a11IsEventStateBased	1.3.6.1.4.1.343.2.7.1.1.11.1.3	INTEGER	read-only	The value of this attribute determines whether the Event being reported is a state-based Event or not. If the value of this attribute is TRUE then the Event is state-based. Otherwise the Event is not state-based.
NUM a11EventStateKey	1.3.6.1.4.1.343.2.7.1.1.11.1.4	DmiInteger	read-only	A unique, single integer key into the Event State group if this is a state-based Event. If this is not a state-based Event then this this attribute's value is not defined.
STR a11AssociatedGroup	1.3.6.1.4.1.343.2.7.1.1.11.1.5	DmiDisplaystring	read-only	The class name of the group that is associated with the events defined in this Event Generation group.
INT a11EventSystem	1.3.6.1.4.1.343.2.7.1.1.11.1.6	INTEGER	read-only	The major functional aspect of the product causing the fault.
INT a11EventSubsystem	1.3.6.1.4.1.343.2.7.1.1.11.1.7	INTEGER	read-only	The minor functional aspect of the product causing the fault.
tTeamingGroup	1.3.6.1.4.1.343.2.7.1.1.12		not-accessible	This group defines various attributes for an AFT/ALB/FEC Team.
eTeamingGroup	1.3.6.1.4.1.343.2.7.1.1.12.1		not-accessible
NUM a12TeamId	1.3.6.1.4.1.343.2.7.1.1.12.1.1	DmiInteger	read-only	The ID of the team.
INT a12TeamMode	1.3.6.1.4.1.343.2.7.1.1.12.1.2	INTEGER	read-only	The configuration mode of the team
NUM a12TeamSize	1.3.6.1.4.1.343.2.7.1.1.12.1.3	DmiInteger	read-only	Total number of adapters in the team
NUM a12CurrentPrimaryAdapter	1.3.6.1.4.1.343.2.7.1.1.12.1.4	DmiInteger	read-only	ID of the current Primary member of the Team
NUM a12OriginalPrimaryAdapter	1.3.6.1.4.1.343.2.7.1.1.12.1.5	DmiInteger	read-only	ID of the original Primary member of the Team since last reset.
NUM a12PreferredPrimaryAdapter	1.3.6.1.4.1.343.2.7.1.1.12.1.6	DmiInteger	read-only	ID of the current designated Preferred Primary adapter in the team.This may be NULL if not set.
tTeamingMemberGroup	1.3.6.1.4.1.343.2.7.1.1.13		not-accessible	This group defines various attributes for each AFT/ALB/FEC member.
eTeamingMemberGroup	1.3.6.1.4.1.343.2.7.1.1.13.1		not-accessible
STR a13BoardType	1.3.6.1.4.1.343.2.7.1.1.13.1.1	DmiDisplaystring	read-only	The board type of this adapter.
INT a13AdapterStatus	1.3.6.1.4.1.343.2.7.1.1.13.1.2	INTEGER	read-only	The current status of the adapter.
INT a13AdapterFunction	1.3.6.1.4.1.343.2.7.1.1.13.1.3	INTEGER	read-only	The current role played by the adapter in the team.
NUM a13AdapterId	1.3.6.1.4.1.343.2.7.1.1.13.1.4	DmiInteger	read-only	ID of the adapter.
STR a13PermanentMacAddress	1.3.6.1.4.1.343.2.7.1.1.13.1.5	DmiDisplaystring	read-only	The permanent MAC address as stored in the EEPROM.
STR a13CurrentMacAddress	1.3.6.1.4.1.343.2.7.1.1.13.1.6	DmiDisplaystring	read-only	The current MAC address utilized by the Team Member. This can change etc.
tIntelFlowcontrolAndTcoGroup	1.3.6.1.4.1.343.2.7.1.1.14		not-accessible
eIntelFlowcontrolAndTcoGroup	1.3.6.1.4.1.343.2.7.1.1.14.1		not-accessible
NUM a14Index	1.3.6.1.4.1.343.2.7.1.1.14.1.1	DmiInteger	read-only
NUM a14FcTransmitPause	1.3.6.1.4.1.343.2.7.1.1.14.1.2	DmiCounter64X	read-only	Number of Flow Control frames transmitted by the device.
NUM a14FcReceivePause	1.3.6.1.4.1.343.2.7.1.1.14.1.3	DmiCounter64X	read-only	Number of Flow Control frames received by the device.
NUM a14FcRcvUnsupported	1.3.6.1.4.1.343.2.7.1.1.14.1.4	DmiCounter64X	read-only	Number of MAC Control frames received by the device that are not Flow Control Pause frames.
NUM a14TransmitTcoFrames	1.3.6.1.4.1.343.2.7.1.1.14.1.5	DmiCounter64X	read-only	Number of TCO frames transmitted.
NUM a14ReceiveTcoFrames	1.3.6.1.4.1.343.2.7.1.1.14.1.6	DmiCounter64X	read-only	Number of TCO frames received.
tIbmFailoverControl	1.3.6.1.4.1.343.2.7.1.1.15		not-accessible
eIbmFailoverControl	1.3.6.1.4.1.343.2.7.1.1.15.1		not-accessible
STR a15FailoverGroupName	1.3.6.1.4.1.343.2.7.1.1.15.1.1	DmiDisplaystring	read-only	The Name of the Failover Group.
NUM a15FailoverGroupIndex	1.3.6.1.4.1.343.2.7.1.1.15.1.2	DmiInteger	read-only	The Group Index that will be used in the Adapter Table to identify the Adapters in this Failover Group.
tIbmFailoverAdapterTable	1.3.6.1.4.1.343.2.7.1.1.16		not-accessible
eIbmFailoverAdapterTable	1.3.6.1.4.1.343.2.7.1.1.16.1		not-accessible
NUM a16FailoverAdapterNumber	1.3.6.1.4.1.343.2.7.1.1.16.1.1	DmiInteger	read-only
STR a16FailoverAdapterName	1.3.6.1.4.1.343.2.7.1.1.16.1.2	DmiDisplaystring	read-only
NUM a16FailoverGroupIndex	1.3.6.1.4.1.343.2.7.1.1.16.1.3	DmiInteger	read-only
NUM a16SlotIndex	1.3.6.1.4.1.343.2.7.1.1.16.1.4	DmiInteger	read-only
INT a16SystemState	1.3.6.1.4.1.343.2.7.1.1.16.1.5	INTEGER	read-only
INT a16FailoverState	1.3.6.1.4.1.343.2.7.1.1.16.1.6	INTEGER	read-only
INT a16ActiveState	1.3.6.1.4.1.343.2.7.1.1.16.1.7	INTEGER	read-only
INT a16AllowRemoteManagement	1.3.6.1.4.1.343.2.7.1.1.16.1.8	INTEGER	read-only
INT a16FailoverAdapterControl	1.3.6.1.4.1.343.2.7.1.1.16.1.9	INTEGER	read-write
INT a16EventType	1.3.6.1.4.1.343.2.7.1.1.16.1.10	INTEGER	read-only	The type of event that has occurred
INT a16Capability	1.3.6.1.4.1.343.2.7.1.1.16.1.11	INTEGER	read-only	Denotes which capabilities distinguish this version from others.
INT a16HotSwapControl	1.3.6.1.4.1.343.2.7.1.1.16.1.12	INTEGER	read-write	Changes the adapter state to/from Hot-Swap-Pending
tEventGenerationIbmFailover	1.3.6.1.4.1.343.2.7.1.1.17		not-accessible
eEventGenerationIbmFailover	1.3.6.1.4.1.343.2.7.1.1.17.1		not-accessible
INT a17EventType	1.3.6.1.4.1.343.2.7.1.1.17.1.1	INTEGER	read-only	The type of Failover Event that has occurred
INT a17EventSeverity	1.3.6.1.4.1.343.2.7.1.1.17.1.2	INTEGER	read-only	The severity of this event
INT a17EventIsState_based	1.3.6.1.4.1.343.2.7.1.1.17.1.3	INTEGER	read-only	The value of this attribute determineswhether the Event being reported is a state-based Event or not. If the value ofthis attribute is True then the EVENT is state-based. Otherwise the Event is notstate-based.
NUM a17EventStateKey	1.3.6.1.4.1.343.2.7.1.1.17.1.4	DmiInteger	read-only	A unique, single integer key into theEvent State group if this is a state-basedEvent. If this is not a state-based Event thenthis attribute's value is not defined.This attribute holds the key identifying a row of theEvent State group within the Component in which the eventgenerator group is located. The current state attributewithin the row contains the current state of this statebased event. The current state can be one of the fourseverities: OK, Non-Critical, Critical, and Non-Recoverable.
STR a17AssociatedGroup	1.3.6.1.4.1.343.2.7.1.1.17.1.5	DmiDisplaystring	read-only	The class name of the group that is associatedwith the events defined in this Event Generationgroup
INT a17EventSystem	1.3.6.1.4.1.343.2.7.1.1.17.1.6	INTEGER	read-only	The major functional aspect of the product causingthe fault.
INT a17EventSubsystem	1.3.6.1.4.1.343.2.7.1.1.17.1.7	INTEGER	read-only	The minor functional aspect of theproduct causing the fault.
tMiftomib	1.3.6.1.4.1.343.2.7.1.1.99		not-accessible	This group defines attributes required for DMI to SNMP translati n.
eMiftomib	1.3.6.1.4.1.343.2.7.1.1.99.1		not-accessible
STR a99MibName	1.3.6.1.4.1.343.2.7.1.1.99.1.1	DmiDisplaystring	read-only	The MIB name that defines this MIF
STR a99MibOid	1.3.6.1.4.1.343.2.7.1.1.99.1.2	DmiDisplaystring	read-only	The MIB Object Identifier that corresponds to this MIF
NUM a99DisableTrap	1.3.6.1.4.1.343.2.7.1.1.99.1.3	DmiInteger	read-write	This attribute can be changed to disable sending of traps from this component

RFC description

Intel Ethernet LAN adapter monitoring via NDIS interface with component identification and performance metrics.

Start monitoring Server/workstation with Intel Ethernet LAN NIC with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download INTELETHERNETLANADAPTERS-MIB

What Is INTELETHERNETLANADAPTERS-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description