All MIBs › INTEL-ES480-SYSTEM-MIB › es480tConfigToUseOnReboot
es480tConfigToUseOnReboot
Module: INTEL-ES480-SYSTEM-MIB
OID (symbolic): INTEL-ES480-SYSTEM-MIB::es480tConfigToUseOnReboot
OID (numeric): 1.3.6.1.4.1.343.6.60.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Controls which NVRAM configuration store will be used on next reboot.
What is es480tConfigToUseOnReboot?
Selects which NVRAM configuration store (primary or secondary) the switch will load the next time it reboots. Use this to stage a rollback: save a known-good config to the secondary store, point this at it, then reboot.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.343.6.60.1.6 snmpwalk -v2c -c public <target> INTEL-ES480-SYSTEM-MIB::es480tConfigToUseOnReboot
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.343.6.60.1.6.1 snmpget -v2c -c public <target> INTEL-ES480-SYSTEM-MIB::es480tConfigToUseOnReboot.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.343.6.60.1.6.1 i <value>
Start monitoring Intel Ethernet switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the INTEL-ES480-SYSTEM-MIB::es480tConfigToUseOnReboot OID value, configure state conditions and alerts, and monitor any Intel Ethernet switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.343 | intel | AOLAN-MIB |
| 1.3.6.1.4.1.343.6 | mib2ext | EXPRESSGS-MIB |
| 1.3.6.1.4.1.343.6.60 | es480tAgent | INTEL-ES480-MIB |
| 1.3.6.1.4.1.343.6.60.1 | es480tSystem | INTEL-ES480-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.343.6.60.1.6 | es480tConfigToUseOnReboot | INTEL-ES480-SYSTEM-MIB |