IGNITENET-MIB

All MIBs › IGNITENET-MIB

Organization: IgniteNet

Last Updated: 2016-02-24

Description: IGNITENET-MIB module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IGNITENET-MIB?

IGNITENET-MIB is a vendor private MIB for IgniteNet networking equipment, a maker of wireless point-to-point/point-to-multipoint radios and Ethernet switches (including the MetroLinq product line), exposing device identity, hardware/firmware version, and per-interface Ethernet and radio status. It covers device identification (model, hardware/firmware version), Ethernet port inventory and link status (speed, duplex, description), and wireless radio inventory. For monitoring, it is used to track software status via firmware version and hardware revision, and interface health via Ethernet speed/duplex, which reveal negotiation problems or unexpected link speed drops on Ethernet ports; radio table entries would similarly expose wireless link status. No dependency on other MIBs is evident from the available data; it appears to be a self-contained vendor tree. It is typically deployed on IgniteNet outdoor wireless bridges/radios and switches used in fixed-wireless ISP and enterprise point-to-point network links. Engineers can download the IGNITENET-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in IGNITENET-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

IgniteNet wireless bridges/radios (e.g., MetroLinq)
IgniteNet Ethernet switches

Monitoring Examples

Polling ethInfoTable/ethInfoEntry for a given ethInfoIndex returns ethInfoSpeed and ethInfoDuplex, letting an administrator detect a port that has unexpectedly negotiated down to a lower speed or half-duplex, a common cause of throughput problems. Checking model, hwVersion, and fwVersion confirms which hardware revision and firmware build is running on a deployed radio, useful for verifying fleet-wide upgrade compliance. The mlRadioNumber and mlRadioInfoTable expose the count and per-radio status of MetroLinq wireless radio modules on multi-radio units.

What Can Be Monitored

firmware version
hardware version
Ethernet port speed and duplex
Ethernet port count/inventory
wireless radio count and status

Imported Objects

From SNMPv2-CONF

OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString
MacAddress
TruthValue

How to Use in IPNetwork Monitor

Example using ethInfoSpeed OID:

Select an IgniteNet wireless bridge/radio (e.g. MetroLinq) or Ethernet switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ethInfoSpeed into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the ethernet speed in MB/s. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ignitenet	1.3.6.1.4.1.47307
ignitenetMIB	1.3.6.1.4.1.47307.1			The MIB module for IgniteNet entities
product	1.3.6.1.4.1.47307.1.1
STR model	1.3.6.1.4.1.47307.1.1.1	DisplayString	read-only	Model of the IgniteNet product
STR hwVersion	1.3.6.1.4.1.47307.1.1.2	DisplayString	read-only	Hardware version of the IgniteNet product
STR fwVersion	1.3.6.1.4.1.47307.1.1.3	DisplayString	read-only	Firmware version of the IgniteNet product
ethernetPorts	1.3.6.1.4.1.47307.1.2
I32 ethNumber	1.3.6.1.4.1.47307.1.2.1	Integer32	read-only	The number of ethernet ports (regardless of their current state) present on this system.
ethInfoTable	1.3.6.1.4.1.47307.1.2.2		not-accessible	A list of ethernet ports. The number of entries is given by the value of ethNumber.
ethInfoEntry	1.3.6.1.4.1.47307.1.2.2.1		not-accessible	An entry containing ethernet port status information.
ETH ethInfoIndex	1.3.6.1.4.1.47307.1.2.2.1.1	EthernetIndex	read-only	A unique value, greater than zero, for each radio, starting from one.
STR ethDescr	1.3.6.1.4.1.47307.1.2.2.1.2	DisplayString	read-only	Ethernet speed in MB/s
I32 ethInfoSpeedEx	1.3.6.1.4.1.47307.1.2.2.1.3	Integer32	read-only	Ethernet speed in MB/s
INT ethInfoDuplex	1.3.6.1.4.1.47307.1.2.2.1.4	INTEGER	read-only	Ethernet speed in MB/s
radios	1.3.6.1.4.1.47307.1.3
metrolinqRadios	1.3.6.1.4.1.47307.1.4
I32 mlRadioNumber	1.3.6.1.4.1.47307.1.4.1	Integer32	read-only	The number of radios (regardless of their current state) present on this system.
mlRadioInfoTable	1.3.6.1.4.1.47307.1.4.2		not-accessible	A list of radio entries. The number of entries is given by the value of radioNumber.
mlRadioInfoEntry	1.3.6.1.4.1.47307.1.4.2.1		not-accessible	An entry containing management information applicable to a particular interface.
RAD mlRadioInfoIndex	1.3.6.1.4.1.47307.1.4.2.1.1	RadioIndex	read-only	A unique value, greater than zero, for each radio, starting from one.
INT mlRadioInfoEnabled	1.3.6.1.4.1.47307.1.4.2.1.2	INTEGER	read-only	The enabled or disabled state of the radio.
STR mlRadioInfoRegDomain	1.3.6.1.4.1.47307.1.4.2.1.3	DisplayString	read-only	Regulation domain set for the radio.
FRE mlRadioInfoFrequency	1.3.6.1.4.1.47307.1.4.2.1.4	FrequencyGHz	read-only	Frequency, raw value expressed in MHz, displayed in GHz
RAD mlRadioInfomcs	1.3.6.1.4.1.47307.1.4.2.1.5	RadioMcsRate	read-only	A value of the radio Modulation and Coding Scheme
I32 mlRadioInfoAckTimeout	1.3.6.1.4.1.47307.1.4.2.1.6	Integer32	read-only	Radio ack timeout in us
I32 mlRadioInfoTxPower	1.3.6.1.4.1.47307.1.4.2.1.7	Integer32	read-only	Radio transmission power in dBm
INT mlRadioInfoAMSDU	1.3.6.1.4.1.47307.1.4.2.1.8	INTEGER	read-only	Radio frame aggregation with MAC Service Data Unit
INT mlRadioInfoAMPDU	1.3.6.1.4.1.47307.1.4.2.1.9	INTEGER	read-only	Radio frame aggregation with MAC Protocol Data Unit
I32 mlRadioInfoRSSILocal	1.3.6.1.4.1.47307.1.4.2.1.10	Integer32	read-only	Radio received signal strength indicator of the local site
I32 mlRadioInfoRSSIRemote	1.3.6.1.4.1.47307.1.4.2.1.11	Integer32	read-only	Radio received signal strength indicator of the remote site
INT mlRadioInfoEncryption	1.3.6.1.4.1.47307.1.4.2.1.12	INTEGER	read-only	Encryption use on the radio
STR mlRadioInfoSSID	1.3.6.1.4.1.47307.1.4.2.1.13	DisplayString	read-only	Setting to failover to 5 GHz radio if 60 GHz is not available or out of range.
INT mlRadioInfoFailover	1.3.6.1.4.1.47307.1.4.2.1.14	INTEGER	read-only	Setting to failover to 5 GHz radio if 60 GHz is not available or out of range.
mlRadioStatusTable	1.3.6.1.4.1.47307.1.4.3		not-accessible	A list of radio entries. The number of entries is given by the value of radioNumber.
mlRadioStatusEntry	1.3.6.1.4.1.47307.1.4.3.1		not-accessible	An entry containing radio status information.
RAD mlRadioStatusIndex	1.3.6.1.4.1.47307.1.4.3.1.1	RadioIndex	read-only	A unique value, greater or equal to zero, for each radio, starting from zero.
INT mlRadioStatusFailoverStatus	1.3.6.1.4.1.47307.1.4.3.1.2	INTEGER	read-only	Indication whether or not 60 GHz radio is failovered to 5 GHz radio.
I32 mlRadioStatusFailoverStats	1.3.6.1.4.1.47307.1.4.3.1.3	Integer32	read-only	Number of radio failovers.
I32 mlRadioStatusCRCErrors	1.3.6.1.4.1.47307.1.4.3.1.4	Integer32	read-only	Number of CRC errors.
I32 mlRadioStatusDrops	1.3.6.1.4.1.47307.1.4.3.1.5	Integer32	read-only	Number of radio packet drops.
I32 mlRadioStatusRetries	1.3.6.1.4.1.47307.1.4.3.1.6	Integer32	read-only	Number of radio retries.

RFC description

IgniteNet wireless access point MIB for monitoring ethernet ports, radios, and wireless interfaces.

Start monitoring IgniteNet wireless bridge/radio (e.g. MetroLinq) or Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IGNITENET-MIB