All MIBs › IES5206-MIB
Organization: ZyXEL
Last Updated: 2012-06-26
Description: IES5206-MIB module
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is IES5206-MIB?
IES5206-MIB is a vendor private MIB module for the IES5206/5212/6217 product family, a line of Ethernet access/DSLAM switching platforms, defining proprietary management objects for access control and AAA (authentication, authorization, and accounting) services. It exposes configuration data covering egress ACL profiles and AAA subsystems including RADIUS and TACACS+ authentication backends. As a monitoring and management tool it is used mainly to verify software/configuration state, confirming ACL egress profiles are applied as intended and that AAA services are properly configured and reachable, rather than exposing classical hardware sensors like temperature or fan speed. It has no explicit stated dependency on other standard MIBs beyond the vendor's private enterprise tree, though it likely coexists with standard IF-MIB/SNMPv2 objects on the device. It is typically deployed on carrier or enterprise access-layer Ethernet switches/DSLAMs providing subscriber authentication and traffic filtering at the network edge. Network engineers evaluating or troubleshooting this functionality can download the IES5206-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in IES5206-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- ZyXEL IES5206/5212/6217 DSLAM/access switch
Monitoring Examples
An administrator would inspect aclEgressProfileTable to confirm which egress ACL profile is bound to a given interface, revealing a misconfigured filter if traffic is unexpectedly blocked or permitted. Checking the radius and tacacsplus configuration branches under aaa/authen/acct/author would verify whether authentication requests are being routed to the correct AAA server, useful when diagnosing failed subscriber logins. Because sample objects are limited, deeper per-port or per-session counters are not confirmed from available data.
What Can Be Monitored
- egress ACL profile assignment
- AAA authentication configuration
- AAA accounting configuration
- AAA authorization configuration
- RADIUS server configuration
- TACACS+ server configuration
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| BridgeId | |
| MacAddress | |
| Timeout | |
| dot1dBasePort | OBJECT-TYPE |
From GBOND-MIB
| GBondScheme |
From IF-MIB
| ifXEntry | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressIPv6 | |
| InetAddressType |
From P-BRIDGE-MIB
| EnabledStatus |
From Q-BRIDGE-MIB
| PortList | |
| VlanIndex | |
| dot1qVlanIndex | OBJECT-TYPE |
From RFC1213-MIB
| DisplayString | |
| PhysAddress | |
| ifIndex |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| IpAddress | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
From VDSL2-LINE-MIB
| xdsl2ChannelStatusEntry | OBJECT-TYPE |
| xdsl2LineBandEntry | OBJECT-TYPE |
| xdsl2LineConfProfEntry | OBJECT-TYPE |
| xdsl2PMChCurrEntry | OBJECT-TYPE |
| xdsl2PMLineCurrEntry | OBJECT-TYPE |
| xdsl2PMLineInitCurrEntry | OBJECT-TYPE |
From VDSL2-LINE-TC-MIB
| Xdsl2Unit |
How to Use in IPNetwork Monitor
Example using loopguardStatsPortTxPkts OID:
Select a ZyXEL IES5206/5212/6217 DSLAM/access switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type loopguardStatsPortTxPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Displays counter of transmited loopguard probe packet on specific port. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| zyxel | 1.3.6.1.4.1.890 | |||
| products | 1.3.6.1.4.1.890.1 | |||
| accessSwitch | 1.3.6.1.4.1.890.1.5 | |||
| iesSeries | 1.3.6.1.4.1.890.1.5.13 | |||
| ies5206 | 1.3.6.1.4.1.890.1.5.13.13 | The file contains the private MIB defition for product IES5206/5212/6217. | ||
| acl | 1.3.6.1.4.1.890.1.5.13.13.1 | |||
| INT aclMaxNumOfAclPerPort | 1.3.6.1.4.1.890.1.5.13.13.1.3 | INTEGER | read-only | The maximum number of ACL per port. |
| aclPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.4 | not-accessible | Configures references to specified ACL rule for the specified port. | |
| aclPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.4.1 | not-accessible | A table entry to assign an interface port with ACL profile. | |
| STR aclPortProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.4.1.1 | DisplayString | read-only | Configures references to specified ACL rule. |
| ROW aclPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.4.1.2 | RowStatus | read-create | Row status of the table entry. |
| INT aclPortProfilePriority | 1.3.6.1.4.1.890.1.5.13.13.1.4.1.3 | INTEGER | read-only | Configures priority of specified ACL rule in this port. ACL rules in a port can not assign to same priority(per-port mode). If priority is 0, it mean no priority(per-profile mode). |
| INT aclMaxNumOfAclProfiles | 1.3.6.1.4.1.890.1.5.13.13.1.5 | INTEGER | read-only | The maximum number of ACL profiles supported by the system. |
| aclProfileTable | 1.3.6.1.4.1.890.1.5.13.13.1.6 | not-accessible | Configures ACL profile. | |
| aclProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.1.6.1 | not-accessible | A table entry for ACL profile table. | |
| STR aclProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.1 | DisplayString | read-only | Name of ACL profile. |
| BIT aclProfileFieldMask | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.3 | Bits | read-create | Defines the compared fields mask for the ACL profile. Every field mask bit has its own referenced field parameter(s). etherType(0) - aclProfileRuleEtype sourceMac(1) - aclProfileRuleSrcMac destMac(2) - aclProfileRuleDestMac sourceOui(3) - aclProfileRuleSrcOui destOui(4) - aclProfileRuleDestOui innerVlan(5) - aclProfileRuleInnerVlan outerVlan(6) - aclProfileRuleOuterVlan innerPbit(7) - aclProfileRuleInnerPbit outerPbit(8) - aclProfileRuleOuterPbit sourceIpRange(9) - aclProfileRuleSrcIpRange, aclProfileRuleSrcIpMask destIpRange(10) - aclProfileRuleDestIpRange, aclProfileRuleDestIpMask sourceIp(11) - aclProfileRuleSrcIp destIp(12) - aclProfileRuleDestIp protocol(13) - aclProfileRuleProtocol ipPrecedence(14) - aclProfileRuleIpPrecedence dscp(15) - aclProfileRuleDscp sourceIpv6(16) - sourceIpv6 destIpv6(17) - aclProfileRuleDestIpv6 nextHeader(18) - aclProfileRuleNextHeader trafficClass(19) - aclProfileRuleTrafficClass sourceL4PortRange(20) - aclProfileRuleSrcL4StartPort, aclProfileRuleSrcL4EndPort destL4PortRange(21) - aclProfileRuleDestL4StartPort, aclProfileRuleDestL4EndPort sourceL4Port(22) - aclProfileRuleSrcL4Port destL4Port(23) - aclProfileRuleDestL4Port |
| INT aclProfileRuleEtype | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.4 | INTEGER | read-create | Matches specified Ether Type. |
| PHY aclProfileRuleSrcMac | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.5 | PhysAddress | read-create | Matches specified source MAC. |
| PHY aclProfileRuleDestMac | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.6 | PhysAddress | read-create | Matches specified destination MAC. |
| OCT aclProfileRuleSrcOui | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.7 | OCTET STRING | read-create | Matches specified source MAC OUI. |
| OCT aclProfileRuleDestOui | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.8 | OCTET STRING | read-create | Matches specified destination MAC OUI. |
| STR aclProfileRuleInnerVlan | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.9 | DisplayString | read-create | Matches specified inner VLAN List. |
| STR aclProfileRuleOuterVlan | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.10 | DisplayString | read-create | Matches specified outer VLAN List. |
| INT aclProfileRuleInnerPbit | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.11 | INTEGER | read-create | Matches specified inner VLAN PBIT. |
| INT aclProfileRuleOuterPbit | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.12 | INTEGER | read-create | Matches specified outer VLAN PBIT. |
| IP aclProfileRuleSrcIpRange | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.13 | IpAddress | read-create | Matches specified source IP range. |
| INT aclProfileRuleSrcIpMask | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.14 | INTEGER | read-create | The subnet mask of source IP range. |
| IP aclProfileRuleDestIpRange | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.15 | IpAddress | read-create | Matches specified destination IP range. |
| INT aclProfileRuleDestIpMask | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.16 | INTEGER | read-create | The subnet mask of destination IP range. |
| IP aclProfileRuleSrcIp | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.17 | IpAddress | read-create | Matches specified source IP address. |
| IP aclProfileRuleDestIp | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.18 | IpAddress | read-create | Matches specified destination IP address. |
| INT aclProfileRuleProtocol | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.19 | INTEGER | read-create | Matches specified IP protocol. |
| INT aclProfileRuleIpPrecedence | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.20 | INTEGER | read-create | Matches specified IP precedence. |
| INT aclProfileRuleDscp | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.21 | INTEGER | read-create | Matches specified IP DSCP. |
| IP aclProfileRuleSrcIpv6 | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.22 | InetAddress | read-create | Matches specified source IPv6 address. |
| IP aclProfileRuleDestIpv6 | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.23 | InetAddress | read-create | Matches specified destination IPv6 address. |
| INT aclProfileRuleNextHeader | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.24 | INTEGER | read-create | Matches specified IPv6 next header. |
| INT aclProfileRuleTrafficClass | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.25 | INTEGER | read-create | Matches specified IPv6 traffic class. |
| INT aclProfileRuleSrcL4StartPort | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.26 | INTEGER | read-create | Matches specified layer 4 source port range. |
| INT aclProfileRuleSrcL4EndPort | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.27 | INTEGER | read-create | Matches specified layer 4 source port range. |
| INT aclProfileRuleDestL4StartPort | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.28 | INTEGER | read-create | Matches specified layer 4 dest port range. |
| INT aclProfileRuleDestL4EndPort | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.29 | INTEGER | read-create | Matches specified layer 4 dest port range. |
| INT aclProfileRuleSrcL4Port | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.30 | INTEGER | read-create | Matches specified layer 4 source port. |
| INT aclProfileRuleDestL4Port | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.31 | INTEGER | read-create | Matches specified layer 4 dest port. |
| ROW aclProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.6.1.38 | RowStatus | read-create | Row status of the table entry. |
| aclMulticast | 1.3.6.1.4.1.890.1.5.13.13.1.7 | |||
| INT aclUnsolicited | 1.3.6.1.4.1.890.1.5.13.13.1.7.1 | INTEGER | read-write | Control filter to drop unknown multicast traffic Drop unknown multicast traffic(1) No drop unknown multicast traffic(2) |
| INT aclUpstream | 1.3.6.1.4.1.890.1.5.13.13.1.7.2 | INTEGER | read-write | Control filter to drop unknown multicast traffic from upstream direction Drop multicast traffic from upstream direction (1) No drop multicast traffic from upstream direction (2) |
| INT aclIpv6PassThrough | 1.3.6.1.4.1.890.1.5.13.13.1.7.3 | INTEGER | read-write | Set IPv6 packet transparent passthrough. |
| aclBpduCtrlTable | 1.3.6.1.4.1.890.1.5.13.13.1.7.4 | not-accessible | Configures BPDU control. | |
| aclBpduCtrlEntry | 1.3.6.1.4.1.890.1.5.13.13.1.7.4.1 | not-accessible | A table entry for BPDU control table. | |
| INT bpduCtrlMode | 1.3.6.1.4.1.890.1.5.13.13.1.7.4.1.1 | INTEGER | read-write | Configure BPDU control mode |
| INT aclReserve | 1.3.6.1.4.1.890.1.5.13.13.1.7.5 | INTEGER | read-write | Reserved multicast packet control |
| aclStormControl | 1.3.6.1.4.1.890.1.5.13.13.1.8 | |||
| aclStormControlTable | 1.3.6.1.4.1.890.1.5.13.13.1.8.4 | not-accessible | Configures ACL storm control. | |
| aclStormControlEntry | 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1 | not-accessible | A table entry for ACL storm control table. | |
| INT aclPortBroadcast | 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1.1 | INTEGER | read-write | Configure rate limit for broadcast storm range depends on line card type MSC: 0~10000000 kbps GLC: 0~1000000 kbps GPON: 0~262143 kbps VLC: 2~100000 kbps (Granularity is 64kbps, ex: 2~127kbps will be 64kbps, 128~191kbps will be 128kbps, etc.) |
| INT aclPortDlf | 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1.2 | INTEGER | read-write | Configure rate limit for DLF (unknown unicast) storm range depends on line card type MSC: 0~10000000 kbps GLC: 0~1000000 kbps GPON: 0~262143 kbps VLC: 2~100000 kbps (Granularity is 64kbps, ex: 2~127kbps will be 64kbps, 128~191kbps will be 128kbps, etc.) |
| INT aclPortMulticast | 1.3.6.1.4.1.890.1.5.13.13.1.8.4.1.3 | INTEGER | read-write | Configure rate limit for unknown multicast storm range depends on line card type MSC: 0~10000000 kbps GLC: 0~1000000 kbps GPON: 0~262143 kbps VLC: 2~100000 kbps (Granularity is 64kbps, ex: 2~127kbps will be 64kbps, 128~191kbps will be 128kbps, etc.) |
| aclProfileActionTable | 1.3.6.1.4.1.890.1.5.13.13.1.9 | not-accessible | Configures ACL profile action. | |
| aclProfileActionEntry | 1.3.6.1.4.1.890.1.5.13.13.1.9.1 | not-accessible | An entry to configure actions regarding to classifier (acl profile). | |
| BIT aclProfileActionMask | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.1 | Bits | read-create | Defines action(s) for the ACL profile. Every acktion mask bit has its own referenced action parameter(s). drop(0) - no action paramter rateLimit(1) - aclProfileActionRateCir, aclProfileActionRateCbs, aclProfileActionRateEir, aclProfileActionRateEbs, aclProfileActionRateMode and the value of cir, cbs, eir, ebs will be set to 64 by default and mode will be set to hierarchical(0) by default changeInnerPbit(2) - aclProfileActionInnerPbit changeOuterPbit(3) - aclProfileActionOuterPbit changeDscp(4) - aclProfileActionDscp changeTrafficClass(5) - aclProfileActionTrafficClass changeQos(6) - aclProfileActionQos permit(7) - no action paramter (only VLC/GLC support) |
| INT aclProfileActionOuterPbit | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.4 | INTEGER | read-create | Change outer VLAN pbit of matched packets. |
| INT aclProfileActionDscp | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.5 | INTEGER | read-create | Change IP DSCP of matched packets. |
| INT aclProfileActionQos | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.7 | INTEGER | read-create | Change Qos of matched packets. |
| INT aclProfileActionRateCir | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.8 | INTEGER | read-create | CIR threshold of this ACL profile. |
| INT aclProfileActionRateCbs | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.9 | INTEGER | read-create | CBS threshold of this ACL profile. |
| INT aclProfileActionRateEir | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.10 | INTEGER | read-create | EIR threshold of this ACL profile. |
| INT aclProfileActionRateEbs | 1.3.6.1.4.1.890.1.5.13.13.1.9.1.11 | INTEGER | read-create | EBS threshold of this ACL profile. |
| INT aclMaxNumOfAclEgressPerPort | 1.3.6.1.4.1.890.1.5.13.13.1.10 | INTEGER | read-only | The maximum number of ACL egress profiles per port. |
| aclEgressPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.11 | not-accessible | Configures references to specified ACL egress rule for the specified port. | |
| aclEgressPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.11.1 | not-accessible | A table entry to assign an interface port with ACL egress profile. | |
| STR aclEgressPortProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.11.1.1 | DisplayString | read-only | Configures references to specified ACL egress rule. |
| ROW aclEgressPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.11.1.2 | RowStatus | read-create | Row status of the table entry. |
| INT aclEgressPortProfilePriority | 1.3.6.1.4.1.890.1.5.13.13.1.11.1.3 | INTEGER | read-only | Configures priority of specified ACL rule in this port. ACL egress rules in a port can not assign to same priority. |
| INT aclMaxNumOfAclEgressProfiles | 1.3.6.1.4.1.890.1.5.13.13.1.12 | INTEGER | read-only | The maximum number of ACL egress profiles supported by the system. |
| aclEgressProfileTable | 1.3.6.1.4.1.890.1.5.13.13.1.13 | not-accessible | Configures ACL egress profile. | |
| aclEgressProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.1.13.1 | not-accessible | A table entry for ACL egress profile table. | |
| STR aclEgressProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.1 | DisplayString | read-only | Name of ACL egress profile. |
| BIT aclEgressProfileFieldMask | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.3 | Bits | read-create | Defines the compared fields mask for the ACL profile. Every field mask bit has its own referenced field parameter(s). etherType(0) - aclEgressProfileRuleEtype sourceMac(1) - aclEgressProfileRuleSrcMac destMac(2) - aclEgressProfileRuleDestMac sourceOui(3) - aclEgressProfileRuleSrcOui destOui(4) - aclEgressProfileRuleDestOui uniVlan(6) - aclEgressProfileRuleUniVlan uniPbit(8) - aclEgressProfileRuleUniPbit sourceIpRange(9) - aclEgressProfileRuleSrcIpRange, aclEgressProfileRuleSrcIpMask destIpRange(10) - aclEgressProfileRuleDestIpRange, aclEgressProfileRuleDestIpMask sourceIp(11) - aclEgressProfileRuleSrcIp destIp(12) - aclEgressProfileRuleDestIp protocol(13) - aclEgressProfileRuleProtocol ipPrecedence(14) - aclEgressProfileRuleIpPrecedence dscp(15) - aclEgressProfileRuleDscp nextHeader(18) - aclEgressProfileRuleNextHeader trafficClass(19) - aclEgressProfileRuleTrafficClass sourceL4PortRange(20) - aclEgressProfileRuleSrcL4StartPort, aclEgressProfileRuleSrcL4EndPort destL4PortRange(21) - aclEgressProfileRuleDestL4StartPort, aclEgressProfileRuleDestL4EndPort sourceL4Port(22) - aclEgressProfileRuleSrcL4Port destL4Port(23) - aclEgressProfileRuleDestL4Port |
| INT aclEgressProfileRuleEtype | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.4 | INTEGER | read-create | Matches specified Ether Type. |
| PHY aclEgressProfileRuleSrcMac | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.5 | PhysAddress | read-create | Matches specified source MAC. |
| PHY aclEgressProfileRuleDestMac | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.6 | PhysAddress | read-create | Matches specified destination MAC. |
| OCT aclEgressProfileRuleSrcOui | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.7 | OCTET STRING | read-create | Matches specified source MAC OUI. |
| OCT aclEgressProfileRuleDestOui | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.8 | OCTET STRING | read-create | Matches specified destination MAC OUI. |
| STR aclEgressProfileRuleUniVlan | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.10 | DisplayString | read-create | Matches specified outer VLAN list. |
| INT aclEgressProfileRuleUniPbit | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.12 | INTEGER | read-create | Matches specified outer VLAN PBIT. |
| IP aclEgressProfileRuleSrcIpRange | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.13 | IpAddress | read-create | Matches specified source IP range. |
| INT aclEgressProfileRuleSrcIpMask | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.14 | INTEGER | read-create | The subnet mask of source IP range. |
| IP aclEgressProfileRuleDestIpRange | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.15 | IpAddress | read-create | Matches specified destination IP range. |
| INT aclEgressProfileRuleDestIpMask | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.16 | INTEGER | read-create | The subnet mask of destination IP range. |
| IP aclEgressProfileRuleSrcIp | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.17 | IpAddress | read-create | Matches specified source IP address. |
| IP aclEgressProfileRuleDestIp | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.18 | IpAddress | read-create | Matches specified destination IP address. |
| INT aclEgressProfileRuleProtocol | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.19 | INTEGER | read-create | Matches specified IP protocol. |
| INT aclEgressProfileRuleIpPrecedence | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.20 | INTEGER | read-create | Matches specified IP precedence. |
| INT aclEgressProfileRuleDscp | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.21 | INTEGER | read-create | Matches specified IP DSCP. |
| INT aclEgressProfileRuleNextHeader | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.24 | INTEGER | read-create | Matches specified IPv6 next header. |
| INT aclEgressProfileRuleTrafficClass | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.25 | INTEGER | read-create | Matches specified IPv6 traffic class. |
| INT aclEgressProfileRuleSrcL4StartPort | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.26 | INTEGER | read-create | Matches specified layer 4 source port range. |
| INT aclEgressProfileRuleSrcL4EndPort | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.27 | INTEGER | read-create | Matches specified layer 4 source port range. |
| INT aclEgressProfileRuleDestL4StartPort | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.28 | INTEGER | read-create | Matches specified layer 4 dest port range. |
| INT aclEgressProfileRuleDestL4EndPort | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.29 | INTEGER | read-create | Matches specified layer 4 dest port range. |
| INT aclEgressProfileRuleSrcL4Port | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.30 | INTEGER | read-create | Matches specified layer 4 source port. |
| INT aclEgressProfileRuleDestL4Port | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.31 | INTEGER | read-create | Matches specified layer 4 dest port. |
| ROW aclEgressProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.13.1.38 | RowStatus | read-create | Row status of the table entry. |
| aclEgressProfileActionTable | 1.3.6.1.4.1.890.1.5.13.13.1.14 | not-accessible | Configures ACL egress profile action. | |
| aclEgressProfileActionEntry | 1.3.6.1.4.1.890.1.5.13.13.1.14.1 | not-accessible | An entry to configure actions regarding to classifier (acl egress profile). | |
| BIT aclEgressProfileActionMask | 1.3.6.1.4.1.890.1.5.13.13.1.14.1.1 | Bits | read-create | Defines action(s) for the ACL egress profile. Every acktion mask bit has its own referenced action parameter(s). drop(0) - no action paramter changeOuterPbit(3) - aclEgressProfileActionOuterPbit changeDscp(4) - aclEgressProfileActionDscp permit(7) - no action paramter (only VLC/GLC support) |
| INT aclEgressProfileActionUniPbit | 1.3.6.1.4.1.890.1.5.13.13.1.14.1.4 | INTEGER | read-create | Change outer VLAN pbit of matched packets. |
| INT aclEgressProfileActionDscp | 1.3.6.1.4.1.890.1.5.13.13.1.14.1.5 | INTEGER | read-create | Change IP DSCP of matched packets. |
| arpInspection | 1.3.6.1.4.1.890.1.5.13.13.1.17 | |||
| arpInspectionTable | 1.3.6.1.4.1.890.1.5.13.13.1.17.1 | not-accessible | Support ARP inspection to filter unauthorized ARP packets on the network. This can prevent many kinds of man-in-the-middle attacks. This table is supported by R5.05 and later versions. | |
| arpInspectionEntry | 1.3.6.1.4.1.890.1.5.13.13.1.17.1.1 | not-accessible | The entry of arpInspectionTable. | |
| INT arpInspectionEnable | 1.3.6.1.4.1.890.1.5.13.13.1.17.1.1.1 | INTEGER | read-write | Enable/disable arp inspection on the specified subscriber port. |
| arpInspectFilterSetupTable | 1.3.6.1.4.1.890.1.5.13.13.1.17.2 | not-accessible | ||
| arpInspectFilterSetupEntry | 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1 | not-accessible | An entry in arpInspectFilterSetupTable. | |
| MAC arpInspectFilterSetupMac | 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1.1 | MacAddress | read-write | The MAC address. |
| VLA arpInspectFilterSetupVid | 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1.2 | VlanIndex | read-write | The VLAN ID. |
| ENA arpInspectFilterSetupClear | 1.3.6.1.4.1.890.1.5.13.13.1.17.2.1.3 | EnabledStatus | read-write | Clear arp inspection Filter database. |
| arpInspectFilterTable | 1.3.6.1.4.1.890.1.5.13.13.1.17.3 | not-accessible | ||
| arpInspectFilterEntry | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1 | not-accessible | An entry in arpInspectFilterTable. | |
| INT arpInspectFilterId | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.1 | INTEGER | read-only | The index. |
| MAC arpInspectFilterMac | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.2 | MacAddress | read-only | The MAC address. |
| VLA arpInspectFilterVid | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.3 | VlanIndex | read-only | The VLAN ID. |
| INT arpInspectFilterExpiry | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.4 | INTEGER | read-only | The expiry time represents how long (in seconds) the MAC address filter remains in the Switch. |
| INT arpInspectFilterReason | 1.3.6.1.4.1.890.1.5.13.13.1.17.3.1.5 | INTEGER | read-only | The reason why the ARP packet was discarded. |
| macFF | 1.3.6.1.4.1.890.1.5.13.13.1.18 | |||
| macFFProfileTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.1 | not-accessible | MAC force forwarding profile configuration table. | |
| macFFProfile | 1.3.6.1.4.1.890.1.5.13.13.1.18.1.1 | not-accessible | MAC force forwarding profile configuration table. | |
| STR macFFProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.18.1.1.1 | DisplayString | read-only | Profile name |
| ROW macFFProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.18.1.1.2 | RowStatus | read-create | |
| macFFEntryTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.2 | not-accessible | MAC force forwarding entry configuration table. | |
| macFFEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1 | not-accessible | MAC force forwarding entry configuration table. | |
| STR macFFEntryProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.1 | DisplayString | read-only | Profile name |
| INT macFFEntryIndex | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.2 | INTEGER | read-only | The MAC force fowarding static entry index 1 ~ 24 |
| IP macFFEntrySrcIP | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.3 | IpAddress | read-write | Matched range for static subscriber's IP in ARP request |
| INT macFFEntryMask | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.4 | INTEGER | read-write | Matched range for static subscriber's IP in ARP request |
| IP macFFEntryArasIP | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.5 | IpAddress | read-write | IP of static MAC force fowarding Access Router/App Server |
| INT macFFEntryVid | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.6 | INTEGER | read-write | vlan ID of MAC force fowarding Access Router/App Server |
| ROW macFFEntryRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.18.2.1.7 | RowStatus | read-create | |
| macFFApplyProflieTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.3 | not-accessible | Configures references to specified macFF profile for the specified slot. | |
| macFFApplyProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.3.1 | not-accessible | A table entry to assign slot with macFF profile. | |
| STR macFFApplyProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.18.3.1.1 | DisplayString | read-write | Apply a profile name. Set '' for no apply proflie. |
| macFFArpStatusUplinkTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.4 | not-accessible | ||
| macFFArpStatusUplinkEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1 | not-accessible | The entry of macFFArpStatusUplinkTable. | |
| IP macFFArpStatusUplinkIpAddr | 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1.1 | IpAddress | read-only | macFF arp ip address from uplink |
| PHY macFFArpStatusUplinkMacAddr | 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1.2 | PhysAddress | read-only | macFF arp mac address from uplink |
| INT macFFArpStatusUplinkMacVid | 1.3.6.1.4.1.890.1.5.13.13.1.18.4.1.3 | INTEGER | read-only | macFF arp vid from uplink |
| macFFArpStatusSlotTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.5 | not-accessible | ||
| macFFArpStatusSlotEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1 | not-accessible | The entry of macFFArpStatusSlotTable. | |
| IP macFFArpStatusSlotIpAddr | 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.1 | IpAddress | read-only | macFF arp ip address from subscrib port |
| PHY macFFArpStatusSlotMacAddr | 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.2 | PhysAddress | read-only | macFF arp mac address from subscrib port |
| INT macFFArpStatusSlotMacVid | 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.3 | INTEGER | read-only | macFF arp vid from subscrib port |
| INT macFFArpStatusSlotPort | 1.3.6.1.4.1.890.1.5.13.13.1.18.5.1.4 | INTEGER | read-only | macFF arp learnt subscrib port |
| macFFArpCntUplinkTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.6 | not-accessible | ||
| macFFArpCntUplinkEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1 | not-accessible | The entry of macFFArpCntUplinkTable. | |
| INT macFFArpCntUplinkReqRx | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.1 | INTEGER | read-only | macFF arp request rx counter from uplink |
| INT macFFArpCntUplinkReqTx | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.2 | INTEGER | read-only | macFF arp request tx counter from uplink |
| INT macFFArpCntUplinkReqRxDrop | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.3 | INTEGER | read-only | macFF arp request rx drop counter from uplink |
| INT macFFArpCntUplinkRpyRx | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.4 | INTEGER | read-only | macFF arp reply rx counter from uplink |
| INT macFFArpCntUplinkRpyTx | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.5 | INTEGER | read-only | macFF arp reply tx counter from uplink |
| INT macFFArpCntUplinkRpyRxDrop | 1.3.6.1.4.1.890.1.5.13.13.1.18.6.1.6 | INTEGER | read-only | macFF arp reply rx drop counter from uplink |
| macFFArpCntPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.18.7 | not-accessible | ||
| macFFArpCntPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1 | not-accessible | The entry of macFFArpCntPortTable. | |
| INT macFFArpCntPortReqRx | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.1 | INTEGER | read-only | macFF arp request rx counter from subscrib port |
| INT macFFArpCntPortReqTx | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.2 | INTEGER | read-only | macFF arp request tx counter from subscrib port |
| INT macFFArpCntPortReqRxDrop | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.3 | INTEGER | read-only | macFF arp request rx drop counter from subscrib port |
| INT macFFArpCntPortRpyRx | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.4 | INTEGER | read-only | macFF arp reply rx counter from subscrib port |
| INT macFFArpCntPortRpyTx | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.5 | INTEGER | read-only | macFF arp reply tx counter from subscrib port |
| INT macFFArpCntPortRpyRxDrop | 1.3.6.1.4.1.890.1.5.13.13.1.18.7.1.6 | INTEGER | read-only | macFF reply rx drop counter from subscrib port |
| macFFOps | 1.3.6.1.4.1.890.1.5.13.13.1.18.8 | |||
| POR macFFTarget | 1.3.6.1.4.1.890.1.5.13.13.1.18.8.1 | PortList | read-write | Configure the target interface (ifindex) to clear packet statistics. 10000: represent slot 1 system 20000: represent slot 2 system 40000: represent slot 4 system 50000: represent slot 5 system 60000: represent slot 6 system |
| INT macFFOperation | 1.3.6.1.4.1.890.1.5.13.13.1.18.8.2 | INTEGER | read-write | Clear macff statistics on the target ifindex specified by 'macFFTarget'. |
| dot1x | 1.3.6.1.4.1.890.1.5.13.13.1.20 | |||
| INT dot1xAuthMethod | 1.3.6.1.4.1.890.1.5.13.13.1.20.2 | INTEGER | read-write | Configure the method for dot1x authentication. userprofile: use local configured user to authenticate user radius: use remote radius server to authenticate user. |
| dot1xRadiusServerTable | 1.3.6.1.4.1.890.1.5.13.13.1.20.3 | not-accessible | A table that contains Radius Server information for 802.1x. | |
| dot1xRadiusServerEntry | 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1 | not-accessible | The entry of Radius Server table. | |
| INT dot1xRadiusServerIndex | 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.1 | INTEGER | read-only | The identity of the RADIUS server. |
| IP dot1xRadiusServerIp | 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.2 | IpAddress | read-write | The IP address of the Radius Server. Default IP 127.0.0.254 is invalid but allowed to set. |
| INT dot1xRadiusServerPort | 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.3 | INTEGER | read-write | The UDP port of the Radius Server. |
| STR dot1xRadiusServerSecret | 1.3.6.1.4.1.890.1.5.13.13.1.20.3.1.4 | DisplayString | read-write | The shared secret of the Radius Server. Server can't work with zero length. |
| dot1xPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.20.4 | not-accessible | This table includes 802.1x port configuration. | |
| dot1xPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1 | not-accessible | An entry in dot1xPortTable. | |
| INT dot1xPortActive | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.1 | INTEGER | read-write | Enable/disable 802.1x for the port. |
| INT dot1xPortControl | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.2 | INTEGER | read-write | Configure the authentication status of the port. auto: if the port is un-authenticated, system will trigger 802.1x procedure to authenticate user. If the port is already authenticated, it will do nothing. auth: force the port directly to authenticated. unauth: force the port to un-authenticated. default is auto |
| INT dot1xPortRadiusServerIndex | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.3 | INTEGER | read-write | The index of the RADIUS server in dot1xRadiusServerTable |
| INT dot1xPortAuthOnce | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.4 | INTEGER | read-write | If the port is authenticated, dot1x will not re-authenticate periodically. |
| INT dot1xPortPeriod | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.5 | INTEGER | read-write | configure the interval if the port need re-authenticate periodically. : 60 ~ 65535 in seconds, default is 3600 seconds. |
| STR dot1xPortCircuitIDInfo | 1.3.6.1.4.1.890.1.5.13.13.1.20.4.1.6 | DisplayString | read-write | Configures Dot1X circuit ID format Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>,./ %%: equals character % %0x00~%0xFF: represents byte value %pname: configured port name %ptel: configured port telephone No. %pid: port index %chvpi: channel vpi %chvci: channel vci %slotid: slot index of the logic port %svlan: SVLAN ID which Dot1X client runs on %cvlan: CVLAN ID which Dot1X client runs on %hname: host device name %cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX X=0~F %cmac2: MAC address of client, represents as XXXXXXXXXXXX X=0~F %cmac3: : MAC address of client, represents as Byte %dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX X=0~F %dmac2: MAC address of host device, represents as XXXXXXXXXXXX X=0~F %dmac3: MAC address of host device, represents as Byte %phtype: ATM: atm Ethernet: eth %hmodel: model name of host device %fwid: host device firmware ID %blank: blank character |
| INT dot1xMaxNumOfUserProfiles | 1.3.6.1.4.1.890.1.5.13.13.1.20.5 | INTEGER | read-only | The maximum number of dot1x user profiles supported by the system. |
| dot1xUserProfileTable | 1.3.6.1.4.1.890.1.5.13.13.1.20.6 | not-accessible | This table includes user profile setting for 802.1x configuration. | |
| dot1xUserProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1 | not-accessible | An entry in dot1xUserProfileTable. | |
| STR dot1xUserProfileName | 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1.1 | DisplayString | read-only | Name of Dot1X user profile |
| STR dot1xUserProfilePassword | 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1.2 | DisplayString | read-create | Configure the password |
| ROW dot1xUserProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.20.6.1.3 | RowStatus | read-create | Row status of the table entry. |
| dot1xStatsPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.20.7 | not-accessible | This table includes port statistics of 802.1x . | |
| dot1xStatsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.20.7.1 | not-accessible | An entry in dot1xStatsPortTable. | |
| INT dot1xStatsPortReAuthCount | 1.3.6.1.4.1.890.1.5.13.13.1.20.7.1.1 | INTEGER | read-only | Display how many times each port re-authroize |
| INT dot1xStatsPortAuthorized | 1.3.6.1.4.1.890.1.5.13.13.1.20.7.1.2 | INTEGER | read-only | Display Authorized status |
| ddos | 1.3.6.1.4.1.890.1.5.13.13.1.21 | |||
| BIT ddosMode | 1.3.6.1.4.1.890.1.5.13.13.1.21.1 | Bits | read-write | Configure the DDoS mode of GENNI ports. |
| portFilterTable | 1.3.6.1.4.1.890.1.5.13.13.1.22 | not-accessible | This table includes packet filter port configuration. | |
| portFilterEntry | 1.3.6.1.4.1.890.1.5.13.13.1.22.1 | not-accessible | An entry in portFilterTable. | |
| BIT filterType | 1.3.6.1.4.1.890.1.5.13.13.1.22.1.1 | Bits | read-write | accept-all Accept all packet type pppoe-only Only receive PPPoE packet custom Custom reject packet type pppoe reject PPPoE packet ip reject IP packet arp reject ARP packet dhcp reject DHCP packet eapol reject EAPOL packet igmp reject IGMP packet netbios reject NETBIOS packet |
| macfilter | 1.3.6.1.4.1.890.1.5.13.13.1.23 | |||
| INT maxNumOfMacFiltersPerSlot | 1.3.6.1.4.1.890.1.5.13.13.1.23.1 | INTEGER | read-only | The max number of mac(oui) filters supported per slot. |
| INT maxNumOfMacFiltersPerPort | 1.3.6.1.4.1.890.1.5.13.13.1.23.2 | INTEGER | read-only | The max number of mac(oui) filters supported per port. |
| INT currNumOfMacFiltersPerSlot | 1.3.6.1.4.1.890.1.5.13.13.1.23.3 | INTEGER | read-only | The current number of mac(oui) filters per slot. |
| macFilterPortTable | 1.3.6.1.4.1.890.1.5.13.13.1.23.4 | not-accessible | This table includes the status of mac filtering for each port. | |
| macFilterPortEntry | 1.3.6.1.4.1.890.1.5.13.13.1.23.4.1 | not-accessible | An entry in macFilterPortTable. | |
| INT macFilterPortEnable | 1.3.6.1.4.1.890.1.5.13.13.1.23.4.1.1 | INTEGER | read-write | Enable/disable MAC filtering for the port. |
| INT macFilterPortFilterMode | 1.3.6.1.4.1.890.1.5.13.13.1.23.4.1.2 | INTEGER | read-write | The mac filter mode (accept or deny) for the port. |
| macFilterTable | 1.3.6.1.4.1.890.1.5.13.13.1.23.5 | not-accessible | A table that contains the mac filter addresses. | |
| macFilterEntry | 1.3.6.1.4.1.890.1.5.13.13.1.23.5.1 | not-accessible | The entry of macFilterTable. | |
| PHY macFilterAddr | 1.3.6.1.4.1.890.1.5.13.13.1.23.5.1.1 | PhysAddress | read-only | The mac address which can pass through or be rejected from the port. |
| ROW macFilterRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.23.5.1.2 | RowStatus | read-create | The row status of the entry. |
| ouiFilterTable | 1.3.6.1.4.1.890.1.5.13.13.1.23.6 | not-accessible | A table that contains the OUI filter addresses. | |
| ouiFilterEntry | 1.3.6.1.4.1.890.1.5.13.13.1.23.6.1 | not-accessible | The entry of ouiFilterTable. | |
| OCT ouiFilterAddr | 1.3.6.1.4.1.890.1.5.13.13.1.23.6.1.1 | OCTET STRING | read-only | The first three bytes of the mac address which can pass through or be rejected from the port. |
| ROW ouiFilterRowStatus | 1.3.6.1.4.1.890.1.5.13.13.1.23.6.1.2 | RowStatus | read-create | The row status of the entry. |
| INT aclProfileMode | 1.3.6.1.4.1.890.1.5.13.13.1.24 | INTEGER | read-write | Set acl profile mode, profile mode only support to GLC card. Port: per-port mode, every port only can set 8 acl-profile with priority. Profile: per-profile mode, every port can set 24 acl-profile with system priority. |
| alarm | 1.3.6.1.4.1.890.1.5.13.13.2 | |||
| alarmOps | 1.3.6.1.4.1.890.1.5.13.13.2.1 | |||
| OID curAlarmClearTargetTrapOid | 1.3.6.1.4.1.890.1.5.13.13.2.1.1 | OBJECT IDENTIFIER | read-write | Set target alarm Trap OID for clearing one current alarm. |
| INT curAlarmClearTargetIndex1 | 1.3.6.1.4.1.890.1.5.13.13.2.1.2 | INTEGER | read-write | Set target alarm index1 for clearing one current alarm. |
| INT curAlarmClearTargetIndex2 | 1.3.6.1.4.1.890.1.5.13.13.2.1.3 | INTEGER | read-write | Set target alarm index2 for clearing one current alarm. |
| INT curAlarmClearTargetIndex3 | 1.3.6.1.4.1.890.1.5.13.13.2.1.4 | INTEGER | read-write | Set target alarm index3 for clearing one current alarm. |
| INT alarmOperation | 1.3.6.1.4.1.890.1.5.13.13.2.1.5 | INTEGER | read-write | Its value will be set to zero after operation finished. |
| currAlarmTable | 1.3.6.1.4.1.890.1.5.13.13.2.2 | not-accessible | Displays current alarm. | |
| currAlarmEntry | 1.3.6.1.4.1.890.1.5.13.13.2.2.1 | not-accessible | ||
| INT currAlarmIndex | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.1 | INTEGER | read-only | Index of the alarm. |
| INT currAlarmCondId | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.2 | INTEGER | read-only | |
| TIK currAlarmOccurTime | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.3 | TimeTicks | read-only | Alarm occurence time (in hundredths of a second) since the system was last re-initialized. |
| OID currAlarmTrapOid | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.4 | OBJECT IDENTIFIER | read-only | Trap OID of the alarm. |
| INT currAlarmParam1 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.5 | INTEGER | read-only | The 1st parameter of the alarm. |
| INT currAlarmParam2 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.6 | INTEGER | read-only | The 2nd parameter of the alarm. |
| INT currAlarmParam3 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.7 | INTEGER | read-only | The 3rd parameter of the alarm. |
| INT currAlarmParam4 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.8 | INTEGER | read-only | The 4th parameter of the alarm. |
| INT currAlarmParam5 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.9 | INTEGER | read-only | The 5th parameter of the alarm. |
| INT currAlarmParam6 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.10 | INTEGER | read-only | The 6th parameter of the alarm. |
| INT currAlarmParam7 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.11 | INTEGER | read-only | The 7th parameter of the alarm. |
| INT currAlarmParam8 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.12 | INTEGER | read-only | The 8th parameter of the alarm. |
| STR currAlarmParam9 | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.13 | DisplayString | read-only | The 9th parameter of the alarm. |
| STR currAlarmTimeDescr | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.14 | DisplayString | read-only | The string representation of occurence time (YYYY/MM/DD HH:MM:SS). |
| INT currAlarmSeverity | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.15 | INTEGER | read-only | The severity of the alarm. |
| STR currAlarmDescr | 1.3.6.1.4.1.890.1.5.13.13.2.2.1.16 | DisplayString | read-only | The description of the alarm. |
| histAlarmTable | 1.3.6.1.4.1.890.1.5.13.13.2.3 | not-accessible | Displays alarm history. | |
| histAlarmEntry | 1.3.6.1.4.1.890.1.5.13.13.2.3.1 | not-accessible | ||
| INT histAlarmIndex | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.1 | INTEGER | read-only | Index of the alarm. |
| INT histAlarmCondId | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.2 | INTEGER | read-only | |
| TIK histAlarmOccurTime | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.3 | TimeTicks | read-only | Alarm occurence time (in hundredths of a second) since the system was last re-initialized. |
| OID histAlarmTrapOid | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.4 | OBJECT IDENTIFIER | read-only | Trap OID of the alarm. |
| INT histAlarmParam1 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.5 | INTEGER | read-only | The 1st parameter of the alarm. |
| INT histAlarmParam2 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.6 | INTEGER | read-only | The 2nd parameter of the alarm. |
| INT histAlarmParam3 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.7 | INTEGER | read-only | The 3rd parameter of the alarm. |
| INT histAlarmParam4 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.8 | INTEGER | read-only | The 4th parameter of the alarm. |
| INT histAlarmParam5 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.9 | INTEGER | read-only | The 5th parameter of the alarm. |
| INT histAlarmParam6 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.10 | INTEGER | read-only | The 6th parameter of the alarm. |
| INT histAlarmParam7 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.11 | INTEGER | read-only | The 7th parameter of the alarm. |
| INT histAlarmParam8 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.12 | INTEGER | read-only | The 8th parameter of the alarm. |
| STR histAlarmParam9 | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.13 | DisplayString | read-only | The 9th parameter of the alarm. |
| STR histAlarmTimeDescr | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.14 | DisplayString | read-only | The string representation of occurence time (YYYY/MM/DD HH:MM:SS). |
| INT histAlarmSeverity | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.15 | INTEGER | read-only | The severity of the alarm. |
| STR histAlarmDescr | 1.3.6.1.4.1.890.1.5.13.13.2.3.1.16 | DisplayString | read-only | The description of the alarm. |
| alarmConfTable | 1.3.6.1.4.1.890.1.5.13.13.2.4 | not-accessible | Configures specified alarm definition. | |
| alarmConfEntry | 1.3.6.1.4.1.890.1.5.13.13.2.4.1 | not-accessible | ||
| INT alarmConfTrapIndex | 1.3.6.1.4.1.890.1.5.13.13.2.4.1.1 | INTEGER | read-only | alarm index |
| OID alarmConfTrapOid | 1.3.6.1.4.1.890.1.5.13.13.2.4.1.2 | OBJECT IDENTIFIER | read-only | alarm condition code |
| INT alarmConfSeverity | 1.3.6.1.4.1.890.1.5.13.13.2.4.1.3 | INTEGER | read-write | alarm severity. |
| INT alarmConfLogFacility | 1.3.6.1.4.1.890.1.5.13.13.2.4.1.4 | INTEGER | read-write | alarm syslog-facility |
| INT alarmConfTarget | 1.3.6.1.4.1.890.1.5.13.13.2.4.1.5 | INTEGER | read-write | alarm issue target |
| INT alarmSeveritySystem | 1.3.6.1.4.1.890.1.5.13.13.2.5 | INTEGER | read-write | Configures the minimum severity level to send out alarm notification (SNMP trap and SYSLOG) for overall system. |
| alarmSeverityPortTable | 1.3.6.1.4.1.890.1.5.13.13.2.6 | not-accessible | Configures the minimum severity level to send out alarm notification (SNMP trap and SYSLOG) for each port. | |
| alarmSeverityPortEntry | 1.3.6.1.4.1.890.1.5.13.13.2.6.1 | not-accessible | ||
| INT alarmSeverityPortThresh | 1.3.6.1.4.1.890.1.5.13.13.2.6.1.1 | INTEGER | read-write | This is to configure the alarm supression on per port basis based on alarm severity. |
| alarmControl | 1.3.6.1.4.1.890.1.5.13.13.2.7 | |||
| INT sysAlarmSuppressEnable | 1.3.6.1.4.1.890.1.5.13.13.2.7.1 | INTEGER | read-write | Enable means no alarm trap will be sent. Only trap of alarm with event severity can be reported. Disable means no suppress. |
| externalAlarmTable | 1.3.6.1.4.1.890.1.5.13.13.2.8 | not-accessible | Configures alarm input description. | |
| externalAlarmEntry | 1.3.6.1.4.1.890.1.5.13.13.2.8.1 | not-accessible | ||
| INT externalAlarmIndex | 1.3.6.1.4.1.890.1.5.13.13.2.8.1.1 | INTEGER | read-only | External alarm index |
| STR externalAlarmName | 1.3.6.1.4.1.890.1.5.13.13.2.8.1.2 | DisplayString | read-write | External alarm name |
| dhcp | 1.3.6.1.4.1.890.1.5.13.13.3 | |||
| dhcpL2Agent | 1.3.6.1.4.1.890.1.5.13.13.3.1 | |||
| dhcpL2AgentTable | 1.3.6.1.4.1.890.1.5.13.13.3.1.1 | not-accessible | A table that contains DHCP L2 agent configuration. | |
| dhcpL2AgentEntry | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1 | not-accessible | An entry of dhcpL2AgentTable. | |
| VLA dhcpL2AgentVlanId | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.1 | VlanIndex | read-only | Specify the VLAN with DHCP transparent or DHCP L2 agent function. |
| INT dhcpL2AgentMode | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.2 | INTEGER | read-create | Specify the DHCP L2 agent mode. dhcpL2Agent(1) - DHCP L2 Agent function is enabled. |
| INT dhcpL2AgentLdraEnable | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.3 | INTEGER | read-create | Enable/disable Light Weight DHCPv6 Relay Agent in dhcpL2Agent mode |
| STR dhcpL2AgentOpt18InterfaceIDInfo | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.5 | DisplayString | read-create | User specific DHCP option18 dhcpL2AgentOpt82CircuitIDEnable ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>,./ %%: equals character % %0x00~%0xFF: represents byte value %pname: configured port name %ptel: configured port telephone No. %pid: port index %chvpi: channel vpi %chvci: channel vci %chid : in non DSL ATM channel, this field represents UNI VLAN ID, in DSL ATM channel, this field represents %chvpi.%chvci %slotid: slot index of the logic port %svlan: SVLAN ID which DHCP client runs on %cvlan: CVLAN ID which DHCP client runs on %hname: host device name %cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F %cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F %cmac3: MAC address of client, represents as Byte %dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F %dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F %dmac3: MAC address of host device, represents as Byte %phtype: represents as atm in ATM or represents as eth in Ethernet %hmodel: model name of host device %fwid: host device firmware ID %blank: blank character |
| STR dhcpL2AgentOpt37RemoteIDInfo | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.7 | DisplayString | read-create | User specific DHCP option37 remote ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>,./ %%: equals character % %0x00~%0xFF: represents byte value %pname: configured port name %ptel: configured port telephone No. %pid: port index %chvpi: channel vpi %chvci: channel vci %chid : in non DSL ATM channel, this field represents UNI VLAN ID, in DSL ATM channel, this field represents %chvpi.%chvci %slotid: slot index of the logic port %svlan: SVLAN ID which DHCP client runs on %cvlan: CVLAN ID which DHCP client runs on %hname: host device name %cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F %cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F %cmac3: MAC address of client, represents as Byte %dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F %dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F %dmac3: MAC address of host device, represents as Byte %phtype: represents as atm in ATM or represents as eth in Ethernet %hmodel: model name of host device %fwid: host device firmware ID %blank: blank character |
| STR dhcpL2AgentOpt82CircuitIDInfo | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.9 | DisplayString | read-create | User specific DHCP option82 circuit ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>,./ %%: equals character % %0x00~%0xFF: represents byte value %pname: configured port name %ptel: configured port telephone No. %pid: port index %chvpi: channel vpi %chvci: channel vci %chid : in non DSL ATM channel, this field represents UNI VLAN ID, in DSL ATM channel, this field represents %chvpi.%chvci %slotid: slot index of the logic port %svlan: SVLAN ID which DHCP client runs on %cvlan: CVLAN ID which DHCP client runs on %hname: host device name %cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F %cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F %cmac3: MAC address of client, represents as Byte %dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F %dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F %dmac3: MAC address of host device, represents as Byte %phtype: represents as atm in ATM or represents as eth in Ethernet %hmodel: model name of host device %fwid: host device firmware ID %blank: blank character |
| STR dhcpL2AgentOpt82RemoteIDInfo | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.11 | DisplayString | read-create | User specific DHCP option82 remote ID info. Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>,./ %%: equals character % %0x00~%0xFF: represents byte value %pname: configured port name %ptel: configured port telephone No. %pid: port index %chvpi: channel vpi %chvci: channel vci %chid : in non DSL ATM channel, this field represents UNI VLAN ID, in DSL ATM channel, this field represents %chvpi.%chvci %slotid: slot index of the logic port %svlan: SVLAN ID which DHCP client runs on %cvlan: CVLAN ID which DHCP client runs on %hname: host device name %cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F %cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F %cmac3: MAC address of client, represents as Byte %dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F %dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F %dmac3: MAC address of host device, represents as Byte %phtype: represents as atm in ATM or represents as eth in Ethernet %hmodel: model name of host device %fwid: host device firmware ID %blank: blank character |
| INT dhcpL2AgentOpt82PolicyVlan | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.12 | INTEGER | read-create | Select option82 policy in dhcpL2Agent mode. |
| INT dhcpL2AgentRelayEnable | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.13 | INTEGER | read-create | Enable/disable DHCP relay in dhcpL2Agent mode. |
| IP dhcpL2AgentRelayPrimarySvrIp | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.14 | InetAddress | read-create | Configure DHCP relay primary server IP in dhcpL2Agent mode. |
| IP dhcpL2AgentRelaySecondarySvrIp | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.15 | InetAddress | read-create | Configure DHCP relay secondary server IP in dhcpL2Agent mode. |
| INT dhcpL2AgentRelayActSvrIndex | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.16 | INTEGER | read-create | Select DHCP relay active server in dhcpL2Agent mode. |
| INT dhcpL2AgentRelayMode | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.17 | INTEGER | read-create | Select DHCP relay mode in dhcpL2Agent mode. |
| ROW dhcpL2AgentRowStatus | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.18 | RowStatus | read-create | Row status of the table entry. |
| INT dhcpL2AgentOpt82Linechar | 1.3.6.1.4.1.890.1.5.13.13.3.1.1.1.19 | INTEGER | read-create | Select option82 linechar in dhcpL2Agent mode. |
| INT dhcpL2AgentOpt82Chk | 1.3.6.1.4.1.890.1.5.13.13.3.1.2 | INTEGER | read-write | Enable/disable system to check option82 in DHCP packets from DHCP server. |
| INT dhcpL2AgentOpt82PolicyMode | 1.3.6.1.4.1.890.1.5.13.13.3.1.3 | INTEGER | read-write | Select DHCP option82 policy mode. |
| dhcpSnoop | 1.3.6.1.4.1.890.1.5.13.13.3.2 | |||
| dhcpSnoopPortTable | 1.3.6.1.4.1.890.1.5.13.13.3.2.1 | not-accessible | A table that contains DHCP Snoop configuration for specified linecard ports. | |
| dhcpSnoopPortEntry | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1 | not-accessible | Configures DHCP snooping for specified linecard ports. | |
| INT dhcpSnoopPortIpMacBindingEnable | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.1 | INTEGER | read-write | Enables IP-MAC binding on specified linecard ports. |
| INT dhcpSnoopPortMaxLeaseCount | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.2 | INTEGER | read-write | Configures DHCP Snooping database max lease count for specified linecard ports. |
| INT dhcpSnoopPortDbFlush | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.7 | INTEGER | read-write | Set 1 to flush DHCP database for specified linecard ports. |
| INT dhcpSnoopPortStatsClear | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.8 | INTEGER | read-write | Set 1 to clear all the counter in dhcpSnoopStatsTable. |
| STR dhcpSnoopPortPriorityVlan | 1.3.6.1.4.1.890.1.5.13.13.3.2.1.1.9 | DisplayString | read-create | Configure priority VLAN of snoop database. Set 0 to clear priority VLAN configuration. |
| INT dhcpSnoopOverflowMode | 1.3.6.1.4.1.890.1.5.13.13.3.2.2 | INTEGER | read-write | Configures DHCP Snooping database overflow handling mode. |
| dhcpSnoopDbTable | 1.3.6.1.4.1.890.1.5.13.13.3.2.3 | not-accessible | A table that contains DHCP Snoop database on specified linecard ports. | |
| dhcpSnoopDbEntry | 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1 | not-accessible | Show DHCP database on specified linecard ports. | |
| IPt dhcpSnoopDbIpType | 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.1 | InetAddressType | read-only | IP address type, IPv6 or IPv4. |
| IP dhcpSnoopDbIp | 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.2 | InetAddress | read-only | Show the IP address in the DHCP database on specified linecard ports. |
| VLA dhcpSnoopDbVid | 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.3 | VlanIndex | read-only | Show the vid in the DHCP database on specified linecard ports. |
| PHY dhcpSnoopDbMac | 1.3.6.1.4.1.890.1.5.13.13.3.2.3.1.4 | PhysAddress | read-only | Show the MAC address in the DHCP database on specified linecard ports. |
| dhcpSnoopStatsTable | 1.3.6.1.4.1.890.1.5.13.13.3.2.4 | not-accessible | A table that contains DHCP stats on specified linecard ports. | |
| dhcpSnoopStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1 | not-accessible | show DHCP stats on specified linecard ports. | |
| INT dhcpSnoopStatsOverFlow | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.1 | INTEGER | read-only | Show the counter when occurs overflow in DHCPv4 and DHCPv6. |
| INT dhcpSnoopStatsV4Discover | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.2 | INTEGER | read-only | Show the number of DHCPv4 Discover packets. |
| INT dhcpSnoopStatsV4Offer | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.3 | INTEGER | read-only | Show the number of DHCPv4 Offer packets. |
| INT dhcpSnoopStatsV4Request | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.4 | INTEGER | read-only | Show the number of DHCPv4 Request packets. |
| INT dhcpSnoopStatsV4Ack | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.5 | INTEGER | read-only | Show the number of DHCPv4 Ack packets. |
| INT dhcpSnoopStatsV4Release | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.6 | INTEGER | read-only | Show the number of DHCPv4 Release packets. |
| INT dhcpSnoopStatsV6Solicit | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.7 | INTEGER | read-only | Show the number of DHCPv6 Solicit packets. |
| INT dhcpSnoopStatsV6Advertise | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.8 | INTEGER | read-only | Show the number of DHCPv6 Advertise packets. |
| INT dhcpSnoopStatsV6Request | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.9 | INTEGER | read-only | Show the number of DHCPv6 Request packets. |
| INT dhcpSnoopStatsV6Reply | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.10 | INTEGER | read-only | Show the number of DHCPv6 Reply packets. |
| INT dhcpSnoopStatsV6Renew | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.11 | INTEGER | read-only | Show the number of DHCPv6 Renew packets. |
| INT dhcpSnoopStatsV6Rebind | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.12 | INTEGER | read-only | Show the number of DHCPv6 Rebind packets. |
| INT dhcpSnoopStatsV6Release | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.13 | INTEGER | read-only | Show the number of DHCPv6 Release packets. |
| INT dhcpSnoopStatsV6RelayForward | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.14 | INTEGER | read-only | Show the number of DHCPv6 Relay Forward packets. |
| INT dhcpSnoopStatsV6RelayReply | 1.3.6.1.4.1.890.1.5.13.13.3.2.4.1.15 | INTEGER | read-only | Show the number of DHCPv6 Relay Reply packets. |
| dhcpStaticIpPortTable | 1.3.6.1.4.1.890.1.5.13.13.3.2.5 | not-accessible | A table that contains DHCP Static IP filter configuration for specified linecard ports. | |
| dhcpStaticIpPortEntry | 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1 | not-accessible | Configures DHCP static IP Filter IP for specified linecard ports. | |
| INT ipIndex | 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1.1 | INTEGER | read-only | Specified static ip Index. |
| IP dhcpStaticIpPortIp | 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1.2 | InetAddress | read-write | Configure IP address of static IP filter for specified linecard ports. |
| INT dhcpStaticIpFilterEnable | 1.3.6.1.4.1.890.1.5.13.13.3.2.5.1.3 | INTEGER | read-write | Enables static IP-MAC Binding on specified linecard ports. |
| dhcpL2AgentPort | 1.3.6.1.4.1.890.1.5.13.13.3.3 | |||
| dhcpL2AgentPortTable | 1.3.6.1.4.1.890.1.5.13.13.3.3.1 | not-accessible | A table that contains DHCP configuration for specified linecard ports. | |
| dhcpL2AgentPortEntry | 1.3.6.1.4.1.890.1.5.13.13.3.3.1.1 | not-accessible | Configures DHCP for specified linecard ports. | |
| INT dhcpL2AgentOpt82PolicyPort | 1.3.6.1.4.1.890.1.5.13.13.3.3.1.1.1 | INTEGER | read-write | Select option82 policy on specified linecard ports. |
| INT dhcpL2AgentOptLdraPolicyPort | 1.3.6.1.4.1.890.1.5.13.13.3.3.1.1.2 | INTEGER | read-write | Select option LDRA policy on specified linecard ports. |
| dhcpServer | 1.3.6.1.4.1.890.1.5.13.13.3.4 | |||
| dhcpServerTable | 1.3.6.1.4.1.890.1.5.13.13.3.4.1 | not-accessible | A table that contains DHCP server configuration on specific VLAN | |
| dhcpServerEntry | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1 | not-accessible | An entry of dhcpServerTable. | |
| VLA dhcpServerVlanId | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.1 | VlanIndex | read-only | Specify the VLAN with DHCP transparent or DHCP server function. |
| IP dhcpServerStartAddress | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.2 | IpAddress | read-create | The IPv4 address of the first address in the range |
| IP dhcpServerEndAddress | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.3 | IpAddress | read-create | The IPv4 address of the last address in the range |
| INT dhpcServerSubnetMaskBit | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.4 | INTEGER | read-create | This option mask option specifies the client's subnet maskbit. 0 means not use this option |
| IP dhpcServerGateway | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.5 | IpAddress | read-create | This option specifies the IPv4 address for the default gateway on the client's subnet. 0.0.0.0 means not use this option |
| IP dhpcServerPrimaryDnsServer | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.6 | IpAddress | read-create | This option specifies the IPv4 address for the primary dns server available to the client. 0.0.0.0 means not use both this option and dhpcServerSecondaryDnsServer |
| IP dhpcServerSecondaryDnsServer | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.7 | IpAddress | read-create | This option specifies the IPv4 address for the secondary dns server available to the client. 0.0.0.0 means not use this option |
| ROW dhcpServerRowStatus | 1.3.6.1.4.1.890.1.5.13.13.3.4.1.1.10 | RowStatus | read-create | Row status of the table entry. |
| dhcpServerLeaseTable | 1.3.6.1.4.1.890.1.5.13.13.3.4.2 | not-accessible | A table that contains DHCP server configuration | |
| dhcpServerLeaseEntry | 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1 | not-accessible | An entry of dhcpLeaseTable. | |
| IP dhcpServerLeaseIpAddress | 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1.1 | IpAddress | read-only | |
| MAC dhcpServerLeaseMacAddress | 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1.2 | MacAddress | read-only | |
| INT dhcpServerLeaseTime | 1.3.6.1.4.1.890.1.5.13.13.3.4.2.1.3 | INTEGER | read-only | |
| ge | 1.3.6.1.4.1.890.1.5.13.13.4 | |||
| geConfTable | 1.3.6.1.4.1.890.1.5.13.13.4.1 | not-accessible | Configures for the specified GE-NNI ports. | |
| geConfEntry | 1.3.6.1.4.1.890.1.5.13.13.4.1.1 | not-accessible | ||
| INT geConfSpeed | 1.3.6.1.4.1.890.1.5.13.13.4.1.1.5 | INTEGER | read-write | Configures speed of gigabit uplink interface speed-auto(1): the system configures uplink speed according to plugged-in transceiver module, if a 1Gbps only transceiver detected then interface speed 1Gbps is configured if a 10Gbps only transceiver detected then interface speed 10Gbps is configured speed-1G-full(2): the system configures interface speed to 1Gbps and full duplex once a dual speed transceiver SFP+ module plugged in, otherwise configure it according to transceiver's speed. speed-2500M-full(3):the system configures interface speed to 2.5Gbps and full duplex once a dual speed transceiver SFP+ module plugged in, otherwise configure it according to transceiver's speed. speed-10G-full(4): the system configures interface speed to 10Gbps and full duplex once a dual speed transceiver SFP+ module plugged in, otherwise configure it according to transceiver's speed. speed-100M-full(5): for GLC card interface only and not for gigabit uplink interface speed-100M-half(6): for GLC card interface only and not for gigabit uplink interface Default: speed-auto(1) Reference: SFF-8472 Rev 11.0 (ftp://ftp.seagate.com/sff) |
| INT geConfAutoNego | 1.3.6.1.4.1.890.1.5.13.13.4.1.1.6 | INTEGER | read-write | Configures auto-negotiation mode of gigabit uplink interface. 10G speed do not support auto-negotiation mode. enable(1): enable auto-negotiation mode disable(2): disable auto-negotiation mode Default: enable(1) |
| INT geConfFlowControl | 1.3.6.1.4.1.890.1.5.13.13.4.1.1.7 | INTEGER | read-write | Configures flow control mode of GE interface. enable(1): enable flow control disable(2): disable flow control Default: enable. |
| INT geConfSubtendMode | 1.3.6.1.4.1.890.1.5.13.13.4.1.1.8 | INTEGER | read-write | Configures flow subtend mode of GE interface. subtend(1): enable subtend mode uplink(2): enable uplink mode auto(2): enable auto mode Default: uplink(2) The traffic from subtend mode interface can be forwarded to uplink mode interface only. auto mode is that the port will be assigned the adjust mode uplink/subtend based on ring protocol. |
| INT geConfVlanTrunk | 1.3.6.1.4.1.890.1.5.13.13.4.1.1.9 | INTEGER | read-write | Configures vlan trunk of GE interface. enable(1): enable vlan trunk disable(2): disable vlan trunk Default: disable(2) The traffic from vlan trunk port will pass all vlan check. |
| geOps | 1.3.6.1.4.1.890.1.5.13.13.4.2 | |||
| POR geTarget | 1.3.6.1.4.1.890.1.5.13.13.4.2.1 | PortList | read-write | Configure the target GE interface (ifindex) to clear packet statistics. |
| INT geOperation | 1.3.6.1.4.1.890.1.5.13.13.4.2.2 | INTEGER | read-write | Clear packet statistics on the target GE ifindex specified by 'geTarget'. |
| geDdmiCfgPortTable | 1.3.6.1.4.1.890.1.5.13.13.4.3 | not-accessible | Displays current DDMI status on GE-NNI port. | |
| geDdmiCfgPortEntry | 1.3.6.1.4.1.890.1.5.13.13.4.3.1 | not-accessible | ||
| STR geDdmiTempHighAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.1 | DisplayString | read-write | User defined high alarm threshold of temperature of sfp port |
| STR geDdmiTempLowAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.2 | DisplayString | read-write | User defined low alarm threshold of temperature of sfp port |
| STR geDdmiVoltageHighAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.3 | DisplayString | read-write | User defined high alarm threshold of voltage of sfp port |
| STR geDdmiVoltageLowAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.4 | DisplayString | read-write | User defined low alarm threshold of voltage of sfp port |
| STR geDdmiTxBiasHighAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.5 | DisplayString | read-write | User defined high alarm threshold of tx bias of sfp port |
| STR geDdmiTxBiasLowAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.6 | DisplayString | read-write | User defined low alarm threshold of tx bias of sfp port |
| STR geDdmiTxPowerHighAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.7 | DisplayString | read-write | User defined high alarm threshold of tx power of sfp port |
| STR geDdmiTxPowerLowAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.8 | DisplayString | read-write | User defined low alarm threshold of tx power of sfp port |
| STR geDdmiTxPowerHighAlarmThreshdBm | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.9 | DisplayString | read-only | User defined high alarm threshold of tx power of sfp port(Units:dBm) |
| STR geDdmiTxPowerLowAlarmThreshdBm | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.10 | DisplayString | read-only | User defined low alarm threshold of tx power of sfp port (Units:dBm) |
| STR geDdmiRxPowerHighAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.11 | DisplayString | read-write | User defined high alarm threshold of rx power of sfp port |
| STR geDdmiRxPowerLowAlarmThresh | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.12 | DisplayString | read-write | User defined low alarm threshold of rx power of sfp port |
| STR geDdmiRxPowerHighAlarmThreshdBm | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.13 | DisplayString | read-only | User defined high alarm threshold of rx power of sfp port (Units:dBm) |
| STR geDdmiRxPowerLowAlarmThreshdBm | 1.3.6.1.4.1.890.1.5.13.13.4.3.1.14 | DisplayString | read-only | User defined low alarm threshold of rx power of sfp port (Units:dBm) |
| geDdmiTable | 1.3.6.1.4.1.890.1.5.13.13.4.4 | not-accessible | Displays current DDMI status on GE-NNI port. | |
| geDdmiEntry | 1.3.6.1.4.1.890.1.5.13.13.4.4.1 | not-accessible | ||
| STR geDdmiVendorName | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.1 | DisplayString | read-only | SFP vendor name. |
| STR geDdmiVendorPn | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.2 | DisplayString | read-only | SFP vendor PN(Part number). |
| INT geDdmiTemp | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.3 | INTEGER | read-only | Internally measured transceive temperature in 10^(-4) Celsius. |
| INT geDdmiTempHighAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.4 | INTEGER | read-only | Internally measured the high alarm threshold of transceiver temperature in 10^(-4) Celsius. |
| INT geDdmiTempLowAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.5 | INTEGER | read-only | Internally measured the low alarm threshold of transceiver temperature in 10^(-4) Celsius. |
| INT geDdmiVolt | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.6 | INTEGER | read-only | Internally measured transceiver supply voltage in 10^(-4) Volts. |
| INT geDdmiVoltHighAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.7 | INTEGER | read-only | Internally measured the high alarm threshold of transceiver supply voltage in 10^(-4) Volts. |
| INT geDdmiVoltLowAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.8 | INTEGER | read-only | Internally measured the low alarm threshold of transceiver supply voltage in 10^(-4) Volts. |
| INT geDdmiTxCurr | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.9 | INTEGER | read-only | Measured TX bias current in 10^(-4) mA. |
| INT geDdmiTxCurrHighAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.10 | INTEGER | read-only | Measured the high alarm threshold of TX bias current in 10^(-4) mA. |
| INT geDdmiTxCurrLowAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.11 | INTEGER | read-only | Measured the low alarm threshold of TX bias current in 10^(-4) mA. |
| INT geDdmiTxPower | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.12 | INTEGER | read-only | Measured TX output power in 10^(-4) uW. |
| INT geDdmiTxPowerHighAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.13 | INTEGER | read-only | Measured the high alarm threshold of TX output power in 10^(-4) uW. |
| INT geDdmiTxPowerLowAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.14 | INTEGER | read-only | Measured the low alarm threshold of TX output power in 10^(-4) uW. |
| INT geDdmiRxPower | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.15 | INTEGER | read-only | Measured RX received optical power in 10^(-4) uW. |
| INT geDdmiRxPowerHighAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.16 | INTEGER | read-only | Measured the high alarm threshold of RX received optical power in 10^(-4) uW. |
| INT geDdmiRxPowerLowAlarm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.17 | INTEGER | read-only | Measured the low alarm threshold of RX received optical power in 10^(-4) uW. |
| INT geDdmiTxPowerdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.18 | INTEGER | read-only | Measured TX output power in 10^(-4) dBm. |
| INT geDdmiTxPowerHighAlarmdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.19 | INTEGER | read-only | Measured the high alarm threshold of TX output power in 10^(-4) dBm. |
| INT geDdmiTxPowerLowAlarmdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.20 | INTEGER | read-only | Measured the low alarm threshold of TX output power in 10^(-4) dBm. |
| INT geDdmiRxPowerdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.21 | INTEGER | read-only | Measured RX received optical power in 10^(-4) dBm. |
| INT geDdmiRxPowerHighAlarmdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.22 | INTEGER | read-only | Measured the high alarm threshold of RX received optical power in 10^(-4) dBm. |
| INT geDdmiRxPowerLowAlarmdBm | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.23 | INTEGER | read-only | Measured the low alarm threshold of RX received optical power in 10^(-4) dBm. |
| STR geDdmiVendorRevision | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.24 | DisplayString | read-only | SFP vendor revision. |
| STR geDdmiVendorSn | 1.3.6.1.4.1.890.1.5.13.13.4.4.1.25 | DisplayString | read-only | SFP vendor SN(Serial number). |
| geStatusTable | 1.3.6.1.4.1.890.1.5.13.13.4.5 | not-accessible | The table displays GE-NNI ports Status | |
| geStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.4.5.1 | not-accessible | ||
| STR geStatusMode | 1.3.6.1.4.1.890.1.5.13.13.4.5.1.1 | DisplayString | read-only | GE-NNI ports Mode |
| hwmonitor | 1.3.6.1.4.1.890.1.5.13.13.5 | |||
| fanConfTable | 1.3.6.1.4.1.890.1.5.13.13.5.1 | not-accessible | Configure the limit value of fan module, currently only control card has fan, an alarm will be raised if the sensing value higher or lower than these value. | |
| fanConfEntry | 1.3.6.1.4.1.890.1.5.13.13.5.1.1 | not-accessible | ||
| INT fanConfIndex | 1.3.6.1.4.1.890.1.5.13.13.5.1.1.1 | INTEGER | read-only | FAN module index |
| INT fanConfHighThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.1.1.2 | INTEGER | read-write | FAN speed high threshold |
| INT fanConfLowThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.1.1.3 | INTEGER | read-write | FAN speed low threshold |
| temperatureConfTable | 1.3.6.1.4.1.890.1.5.13.13.5.2 | not-accessible | Configure the limit value of temperature module, an alarm will be raised if the sensing value higher or lower than these value. | |
| temperatureConfEntry | 1.3.6.1.4.1.890.1.5.13.13.5.2.1 | not-accessible | This is a temperature detection configuration entry to define temperature alarm high and low threshold. | |
| INT temperatureConfIndex | 1.3.6.1.4.1.890.1.5.13.13.5.2.1.1 | INTEGER | read-only | The temperatureConfIndex indicates temperature sensor point where: 1 - is a sensing point near DC/DC power brick 2 - is a sensing point near Analog Front End (AFE) chip 3 - is a sensing point near CPU. |
| INT temperatureConfHighThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.2.1.2 | INTEGER | read-write | Temperature high threshold. if card type is olc3416-22, then the range is -50 ~ 106 and another card type is -50 ~ 100 |
| INT temperatureConfLowThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.2.1.3 | INTEGER | read-write | Temperature low threshold. if card type is olc3416-22, then the range is -50 ~ 106 and another card type is -50 ~ 100 |
| INT temperatureConfCardType | 1.3.6.1.4.1.890.1.5.13.13.5.2.1.4 | INTEGER | read-only | Card type of temperature threshold |
| voltageConfTable | 1.3.6.1.4.1.890.1.5.13.13.5.3 | not-accessible | Configure the limit value of voltage module, an alarm will be raised if the sensing value higher or lower than these value. | |
| voltageConfEntry | 1.3.6.1.4.1.890.1.5.13.13.5.3.1 | not-accessible | This is a voltage detection configuration entry to define voltage alarm high and low threshold. | |
| INT voltageConfIndex | 1.3.6.1.4.1.890.1.5.13.13.5.3.1.1 | INTEGER | read-only | Voltage sensor is indexed from 1 to 5. voltage sensor 1 - monitor +1.05Vdc source voltage sensor 2 - monitor +1.2Vdc source voltage sensor 3 - monitor +1.8Vdc source voltage sensor 4 - monitor +3.3Vdc source voltage sensor 5 - monitor +14.5Vdc source |
| INT voltageConfHighThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.3.1.2 | INTEGER | read-write | Voltage high threshold. |
| INT voltageConfLowThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.3.1.3 | INTEGER | read-write | Voltage low threshold. |
| INT voltageConfCardType | 1.3.6.1.4.1.890.1.5.13.13.5.3.1.4 | INTEGER | read-only | Card type of Voltage threshold |
| fanStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.4 | not-accessible | A table that contains rpm information about the fans. | |
| fanStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.4.1 | not-accessible | ||
| INT fanRpmCurValue | 1.3.6.1.4.1.890.1.5.13.13.5.4.1.1 | INTEGER | read-only | The current rpm of the fan. |
| INT fanRpmMaxValue | 1.3.6.1.4.1.890.1.5.13.13.5.4.1.2 | INTEGER | read-only | The maximum rpm ever performed by the fan. |
| INT fanRpmMinValue | 1.3.6.1.4.1.890.1.5.13.13.5.4.1.3 | INTEGER | read-only | The minimum rpm ever performed by the fan. |
| INT fanRpmAvgValue | 1.3.6.1.4.1.890.1.5.13.13.5.4.1.4 | INTEGER | read-only | The average rpm performed by the fan. |
| STR fanRpmDescr | 1.3.6.1.4.1.890.1.5.13.13.5.4.1.5 | DisplayString | read-only | The description of the fan (e.g. location, function, etc.). |
| temperatureStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.5 | not-accessible | A table that contains temperature information. | |
| temperatureStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.5.1 | not-accessible | This is a temperature statistatics since system restarted. | |
| INT temperatureCurValue | 1.3.6.1.4.1.890.1.5.13.13.5.5.1.1 | INTEGER | read-only | The current temperature detected by the sensor. |
| INT temperatureMaxValue | 1.3.6.1.4.1.890.1.5.13.13.5.5.1.2 | INTEGER | read-only | The maximum temperature detected by the sensor since system restarted. |
| INT temperatureMinValue | 1.3.6.1.4.1.890.1.5.13.13.5.5.1.3 | INTEGER | read-only | The minimum temperature detected by the sensor since system restarted. |
| INT temperatureAvgValue | 1.3.6.1.4.1.890.1.5.13.13.5.5.1.4 | INTEGER | read-only | The average temperature is calculated/aveaged by software based on current temperature values since system restarted. |
| STR temperatureDescr | 1.3.6.1.4.1.890.1.5.13.13.5.5.1.5 | DisplayString | read-only | The description of the temperature sensor (e.g. CPU for temperatureConfIndex 3). |
| voltageStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.6 | not-accessible | A table that contains voltage information about the system. | |
| voltageStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.6.1 | not-accessible | This is a voltage statistics since system restarted. | |
| INT voltageCurValue | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.1 | INTEGER | read-only | The current voltage detected by the sensor. |
| INT voltageMaxValue | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.2 | INTEGER | read-only | The maximum voltage detected by the sensor since system restarted. |
| INT voltageMinValue | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.3 | INTEGER | read-only | The minimum voltage detected by the sensor since system restarted. |
| INT voltageAvgValue | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.4 | INTEGER | read-only | The average voltage calculated/averaged by software based on current voltage values since system restarted. |
| INT voltageNominalValue | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.5 | INTEGER | read-only | The nominal voltage which the power should be supplied. This is information from hardware board design |
| STR voltageDescr | 1.3.6.1.4.1.890.1.5.13.13.5.6.1.6 | DisplayString | read-only | The description of the voltage (e.g. +1.05V, a 1.05 Vdc voltage input). |
| fanModeConfTable | 1.3.6.1.4.1.890.1.5.13.13.5.7 | not-accessible | Configure the fan mode of fan module. | |
| fanModeConfEntry | 1.3.6.1.4.1.890.1.5.13.13.5.7.1 | not-accessible | ||
| INT fanModeConfGroup | 1.3.6.1.4.1.890.1.5.13.13.5.7.1.1 | INTEGER | read-only | FAN group |
| INT fanModeConfStatus | 1.3.6.1.4.1.890.1.5.13.13.5.7.1.2 | INTEGER | read-write | Set the fan mode. average : fan duty-cycle with average temperature immediate : fan duty-cycle with immediate temperature fix : the mode displayed based on the setting of duty-cycle in fanDutyCycleConfTable by user |
| fanDutyCycleConfTable | 1.3.6.1.4.1.890.1.5.13.13.5.8 | not-accessible | Configure the duty cycle of fan module. | |
| fanDutyCycleConfEntry | 1.3.6.1.4.1.890.1.5.13.13.5.8.1 | not-accessible | ||
| INT fanDutyCycleConfGroup | 1.3.6.1.4.1.890.1.5.13.13.5.8.1.1 | INTEGER | read-only | FAN group |
| INT fanDutyCycleConfPercentage | 1.3.6.1.4.1.890.1.5.13.13.5.8.1.2 | INTEGER | read-write | FAN duty cycle percentage |
| cpuStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.9 | not-accessible | Show cpu status. | |
| cpuStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.9.1 | not-accessible | Display the status of CPU loading. Index 0: Average CPU loading for the system. Index 1 ~ 8: CPU loading for per core. | |
| INT cpuStatsIndex | 1.3.6.1.4.1.890.1.5.13.13.5.9.1.1 | INTEGER | read-only | CPU Status index. |
| INT cpuStatsHighThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.9.1.2 | INTEGER | read-only | The High Threshold of CPU loading. |
| G32 cpuStatsCurrent | 1.3.6.1.4.1.890.1.5.13.13.5.9.1.3 | Gauge32 | read-only | Current CPU loading. |
| memStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.10 | not-accessible | Show mem status. | |
| memStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.10.1 | not-accessible | Display memory utilization. | |
| INT memStatsIndex | 1.3.6.1.4.1.890.1.5.13.13.5.10.1.1 | INTEGER | read-only | MEM Status index. |
| STR memStatsHighThreshold | 1.3.6.1.4.1.890.1.5.13.13.5.10.1.2 | DisplayString | read-write | The High Threshold of memory. |
| STR memStatsCurrent | 1.3.6.1.4.1.890.1.5.13.13.5.10.1.3 | DisplayString | read-only | Current Memory loading. |
| powerStatsTable | 1.3.6.1.4.1.890.1.5.13.13.5.11 | not-accessible | A table that display the current vlaue for power module (only support on IES4204, not support on IES5206) | |
| powerStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.5.11.1 | not-accessible | The entry of powerStatsTable (only support on IES4204, not support on IES5206) | |
| INT powerStatsIndex | 1.3.6.1.4.1.890.1.5.13.13.5.11.1.1 | INTEGER | read-only | The index for the power module |
| STR powerStatsVoltage | 1.3.6.1.4.1.890.1.5.13.13.5.11.1.2 | DisplayString | read-only | Current power voltage(V) |
| STR powerStatsTemperature | 1.3.6.1.4.1.890.1.5.13.13.5.11.1.3 | DisplayString | read-only | Current power temperature(C) |
| STR powerStatsCurrent | 1.3.6.1.4.1.890.1.5.13.13.5.11.1.4 | DisplayString | read-only | Current power current(A) |
| STR powerStatsPower | 1.3.6.1.4.1.890.1.5.13.13.5.11.1.5 | DisplayString | read-only | Current power power(W) |
| igmpmld | 1.3.6.1.4.1.890.1.5.13.13.6 | |||
| INT igmpmldMode | 1.3.6.1.4.1.890.1.5.13.13.6.1 | INTEGER | read-write | IGMP or MLD packet non-mvlan handling mode. disable(0) - disable IGMP or MLD function snooping(2) - packets are handled IGMP or MLD snopping function proxy(3) - packets are handled IGMP or MLD proxy function proxyReport(4) - packets are handled IGMP or MLD proxy Report function |
| INT igmpmldVersion | 1.3.6.1.4.1.890.1.5.13.13.6.2 | INTEGER | read-write | Configures IGMP/MLD protocol version. |
| INT igmpmldLeaveMode | 1.3.6.1.4.1.890.1.5.13.13.6.3 | INTEGER | read-write | Configures IGMP/MLD leave mode Fast-leave:1 After checking last source IP is leaved, group timeout is immediately. No G-SQ send out. Last-member-query:2 After checking last source IP is leaved, send G-SQ. Group starts to wait for response in last-member-query interval. If no response, group timeout. Every-leave:3 Each time leave report is received, send G-SQ. Group starts to wait for response even other source IPs existed. If no response, group timeout. If lots of different source IP leave in same group in last-member-query interval, only one G-SQ would be sent out to prevent lots of response. |
| INT igmpmldLastMemberQueryInterval | 1.3.6.1.4.1.890.1.5.13.13.6.4 | INTEGER | read-write | Configures last member query interval 200~1000 in ms, in step of 100 |
| INT igmpmldLastMemberQueryRobustness | 1.3.6.1.4.1.890.1.5.13.13.6.5 | INTEGER | read-write | Configures last member query robusteness. |
| INT igmpmldGeneralQueryInterval | 1.3.6.1.4.1.890.1.5.13.13.6.6 | INTEGER | read-write | Configures genery query query interval. |
| INT igmpmldGeneralQueryRobustness | 1.3.6.1.4.1.890.1.5.13.13.6.7 | INTEGER | read-write | Configures genery query robustness. |
| INT igmpmldGeneralQueryMaxRespTime | 1.3.6.1.4.1.890.1.5.13.13.6.8 | INTEGER | read-write | Configures genery query maximum response time. |
| igmpmldConfPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.9 | not-accessible | igmp/mld Conf Port Table. | |
| igmpmldConfPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.9.1 | not-accessible | ||
| INT igmpmldConfPortMaxGroupCount | 1.3.6.1.4.1.890.1.5.13.13.6.9.1.1 | INTEGER | read-write | Configures maximum group counts on the specified UNI ports. |
| INT igmpmldConfPortPrivilegeEnable | 1.3.6.1.4.1.890.1.5.13.13.6.9.1.2 | INTEGER | read-write | Enables group privilege checking on specified UNI ports. |
| INT igmpmldConfPortCacMaxBandwidth | 1.3.6.1.4.1.890.1.5.13.13.6.9.1.4 | INTEGER | read-write | Configures maximum CAC bandwidth on the specified UNI ports. 0 means no limited |
| INT igmpmldConfPortMaxMsgCount | 1.3.6.1.4.1.890.1.5.13.13.6.9.1.5 | INTEGER | read-write | Configures maximum message counts on the specified UNI ports. |
| groupPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.10 | |||
| INT igmpmldMaxNumOfGroupPrivilegeProfiles | 1.3.6.1.4.1.890.1.5.13.13.6.10.1 | INTEGER | read-only | The maximum number of group privilege profiles supported by the system. |
| igmpmldGroupPrivilegeProfileTable | 1.3.6.1.4.1.890.1.5.13.13.6.10.2 | not-accessible | Multicast group privilege profile table | |
| igmpmldGroupPrivilegeProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1 | not-accessible | ||
| STR igmpmldGroupPrivilegeProfileName | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.1 | DisplayString | read-only | Profile name |
| INT igmpmldGroupPrivilegeProfileIndex | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.2 | INTEGER | read-only | Configures a privilege entry of specified group privilege profile. |
| IPt igmpmldGroupPrivilegeProfileAddressType | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.3 | InetAddressType | read-create | The type of address format used for the igmpmldGroupPrivilegeProfileStartIp object and igmpmldGroupPrivilegeProfileEndIp object. |
| IP igmpmldGroupPrivilegeProfileStartIp | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.4 | InetAddress | read-create | ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff |
| IP igmpmldGroupPrivilegeProfileEndIp | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.5 | InetAddress | read-create | ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff |
| INT igmpmldGroupPrivilegeProfilePrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.6 | INTEGER | read-create | forbid: deny groups delivery permit: allows groups delivery. preview: allows groups preview. |
| INT igmpmldGroupPrivilegeProfilePrivilegePreviewLength | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.7 | INTEGER | read-create | length timer of preview privilege |
| INT igmpmldGroupPrivilegeProfilePrivilegePreviewInterval | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.8 | INTEGER | read-create | interval timer of preview privilege |
| INT igmpmldGroupPrivilegeProfilePrivilegePreviewCount | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.9 | INTEGER | read-create | preview count |
| INT igmpmldGroupPrivilegeProfilePrivilegePreviewReset | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.10 | INTEGER | read-create | reset timer of preview privilege |
| INT igmpmldGroupPrivilegeProfileCacBandwidth | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.11 | INTEGER | read-create | Multicast channel bandwidth for channel specified |
| ROW igmpmldGroupPrivilegeProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.6.10.2.1.12 | RowStatus | read-create | Row status of the table entry. To destroy the whole profile directly, use igmpmldGroupPrivilegeProfileIndex 0 to indicate this case. |
| igmpmldGroupPrivilegePortTable | 1.3.6.1.4.1.890.1.5.13.13.6.10.3 | not-accessible | Configures group privilege profile to UNI ports | |
| igmpmldGroupPrivilegePortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.10.3.1 | not-accessible | ||
| ROW igmpmldGroupPrivilegePortEntryRowStatus | 1.3.6.1.4.1.890.1.5.13.13.6.10.3.1.1 | RowStatus | read-create | Row status of the table entry. |
| mvlan | 1.3.6.1.4.1.890.1.5.13.13.6.11 | |||
| INT igmpmldMaxNumOfMvlan | 1.3.6.1.4.1.890.1.5.13.13.6.11.1 | INTEGER | read-only | The maximum number of MVLAN supported by the system. |
| igmpmldMvlanTable | 1.3.6.1.4.1.890.1.5.13.13.6.11.2 | not-accessible | ||
| igmpmldMvlanEntry | 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1 | not-accessible | ||
| VLA igmpmldMvlanId | 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1.1 | VlanIndex | read-only | Specified MVLAN ID. |
| ROW igmpmldMvlanRowStatus | 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1.2 | RowStatus | read-create | Row status of the table entry. |
| INT igmpmldMvlanPbit | 1.3.6.1.4.1.890.1.5.13.13.6.11.2.1.3 | INTEGER | read-write | Configure the priority for specified mvlan group proxy report/leave/query, snooping report/leave/LMQ. : 0~8. default 8. 8 stands for using incoming vlan, but auto-genetated query/report uses priority 7. |
| igmpmldMvlanPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.11.3 | not-accessible | Joins specified UNI ports to MVLAN. | |
| igmpmldMvlanPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.11.3.1 | not-accessible | ||
| VLA igmpmldMvlanPortUniVlan | 1.3.6.1.4.1.890.1.5.13.13.6.11.3.1.1 | VlanIndex | read-create | Specifies the egress VLAN ID, 0 means untag. |
| ROW igmpmldMvlanPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.6.11.3.1.2 | RowStatus | read-create | Row status of the table entry. |
| igmpmldMvlanMapTable | 1.3.6.1.4.1.890.1.5.13.13.6.11.4 | not-accessible | Configures N:1 VLAN mapping by group address. | |
| igmpmldMvlanMapEntry | 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1 | not-accessible | ||
| INT igmpmldMvlanMapIndex | 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.1 | INTEGER | read-only | Configures a mapping entry of mvlan map table. |
| IP igmpmldMvlanMapStartIp | 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.2 | InetAddress | read-create | ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff |
| IP igmpmldMvlanMapEndIp | 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.3 | InetAddress | read-create | ipv4: 224.0.0.0 ~ 239.255.255.255, ipv6: ff00::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff |
| ROW igmpmldMvlanMapRowStatus | 1.3.6.1.4.1.890.1.5.13.13.6.11.4.1.4 | RowStatus | read-create | Row status of the table entry. |
| group | 1.3.6.1.4.1.890.1.5.13.13.6.12 | |||
| igmpmldMvlanGroupTable | 1.3.6.1.4.1.890.1.5.13.13.6.12.3 | not-accessible | This table includes igmpmld group by mvlan information. | |
| igmpmldMvlanGroupEntry | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1 | not-accessible | An entry in igmpmldMvlanGroupTable. | |
| VLA igmpmldMvlanGroupId | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.1 | VlanIndex | read-only | Specified MVLAN ID. |
| IPt igmpmldMvlanGroupAddressType | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.2 | InetAddressType | read-only | The type of address format used for the igmpmldGroupAddress object. |
| IP igmpmldMvlanGroupAddress | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.3 | InetAddress | read-only | igmpmld group address |
| INT igmpmldMvlanGroupNumberOfMembers | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.4 | INTEGER | read-only | number Of group members |
| INT igmpmldMvlanGroupNumberOfNewJoinedMembers | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.5 | INTEGER | read-only | number Of new joined members |
| INT igmpmldMvlanGroupNumberOfLeftMembers | 1.3.6.1.4.1.890.1.5.13.13.6.12.3.1.6 | INTEGER | read-only | number Of left members |
| igmpmldMvlanGroupPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.12.4 | not-accessible | This table includes igmpmld Group port by mvlan information. | |
| igmpmldMvlanGroupPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1 | not-accessible | An entry in igmpmldGroupPortTable. | |
| STR igmpmldMvlanGroupCreateTime | 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.1 | DisplayString | read-only | createTime of igmpmld group |
| INT igmpmldMvlanGroupPortBandwidth | 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.2 | INTEGER | read-only | bandwidth of igmpmld group |
| INT igmpmldMvlanGroupPortPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.3 | INTEGER | read-only | privilege of igmpmld group |
| INT igmpmldMvlanGroupPortState | 1.3.6.1.4.1.890.1.5.13.13.6.12.4.1.4 | INTEGER | read-only | state of igmpmld group |
| mgmdQuerierIpTable | 1.3.6.1.4.1.890.1.5.13.13.6.12.5 | not-accessible | This table includes querier IP by mvlan information. | |
| mgmdQuerierIpEntry | 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1 | not-accessible | An entry in mgmdQuerierIpTable. | |
| VLA mgmdQuerierIpVid | 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1.1 | VlanIndex | read-only | Specified MVLAN ID. |
| IPt mgmdQuerierIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1.2 | InetAddressType | read-only | The type of address format used for the mgmdQuerierIpAddress object. |
| IP mgmdQuerierIpAddress | 1.3.6.1.4.1.890.1.5.13.13.6.12.5.1.3 | InetAddress | read-only | igmpmld QuerierIp address |
| mgmdClientSrcIpTable | 1.3.6.1.4.1.890.1.5.13.13.6.12.6 | not-accessible | This table includes client source IP on per Group. | |
| mgmdClientSrcIpEntry | 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1 | not-accessible | An entry in mgmdClientSrcIpTable. | |
| INT mgmdClientSrcIpIndex | 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1.1 | INTEGER | read-only | |
| IPt mgmdClientSrcIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1.2 | InetAddressType | read-only | |
| IP mgmdClientSrcIpAddress | 1.3.6.1.4.1.890.1.5.13.13.6.12.6.1.3 | InetAddress | read-only | |
| igmpmldStatistics | 1.3.6.1.4.1.890.1.5.13.13.6.13 | |||
| igmpmldStatisticsPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.13.5 | not-accessible | This table includes IGMP/MLD port statistics information | |
| igmpmldStatisticsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1 | not-accessible | An entry in igmpmldStatisticsPortTable | |
| INT igmpmldStatisticsPortQueryRx | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.5 | INTEGER | read-only | The total number of IGMP query messages received. |
| INT igmpmldStatisticsPortQueryTx | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.6 | INTEGER | read-only | The total number of IGMP query messages transmitted. |
| INT igmpmldStatisticsPortReportRx | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.16 | INTEGER | read-only | The total number of IGMP/MLD report messages received |
| INT igmpmldStatisticsPortReportTx | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.17 | INTEGER | read-only | The total number of IGMP/MLD report messages transmitted |
| INT igmpmldStatisticsPortReportJoinIgmpv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.18 | INTEGER | read-only | The total number of IGMPv2 join type report messages |
| INT igmpmldStatisticsPortReportLeaveIgmpv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.19 | INTEGER | read-only | The total number of IGMPv2 leave type report messages |
| INT igmpmldStatisticsPortReportDropIgmp | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.20 | INTEGER | read-only | The total number of IGMP dropped report messages |
| INT igmpmldStatisticsPortReportJoinMldv1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.22 | INTEGER | read-only | The total number of MLDv1 join type report messages |
| INT igmpmldStatisticsPortReportLeaveMldv1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.23 | INTEGER | read-only | The total number of MLDv1 leave type report messages |
| INT igmpmldStatisticsPortReportDropMld | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.24 | INTEGER | read-only | The total number of MLD dropped report messages |
| INT igmpmldStatisticsPortReportIgmpv3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.25 | INTEGER | read-only | The total number of IGMPv3 report messages |
| INT igmpmldStatisticsPortReportMldv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.26 | INTEGER | read-only | The total number of MLDv2 report messages |
| INT igmpmldStatisticsPortQueryDropIgmp | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.27 | INTEGER | read-only | The total number of IGMP dropped query messages |
| INT igmpmldStatisticsPortQueryDropMld | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.28 | INTEGER | read-only | The total number of MLD dropped query messages |
| INT igmpmldStatisticsPortQueryIgmpv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.29 | INTEGER | read-only | The total number of IGMPv2 query messages |
| INT igmpmldStatisticsPortQueryIgmpv3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.30 | INTEGER | read-only | The total number of IGMPv3 query messages |
| INT igmpmldStatisticsPortQueryMldv1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.31 | INTEGER | read-only | The total number of MLDv1 query messages |
| INT igmpmldStatisticsPortQueryMldv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.5.1.32 | INTEGER | read-only | The total number of Mldv2 query messages |
| mgmdStatisticsPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.13.6 | not-accessible | This table includes IGMP/MLD port statistics information | |
| mgmdStatisticsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1 | not-accessible | An entry in mgmdStatisticsPortTable | |
| INT igmpCounterPortRxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.1 | INTEGER | read-only | Total accepted IGMP RX query |
| INT igmpCounterPortRxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.2 | INTEGER | read-only | Accepted IGMP RX V1 query |
| INT igmpCounterPortRxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.3 | INTEGER | read-only | Accepted IGMP RX V2 query |
| INT igmpCounterPortRxQueryV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.4 | INTEGER | read-only | Accepted IGMP RX V3 query |
| INT igmpCounterPortRxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.5 | INTEGER | read-only | Accepted IGMP RX specific query |
| INT igmpCounterPortRxQueryDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.6 | INTEGER | read-only | IGMP RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled |
| INT igmpCounterPortRxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.7 | INTEGER | read-only | Total accepted IGMP RX report+leave |
| INT igmpCounterPortRxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.8 | INTEGER | read-only | Accepted IGMP RX V1 report |
| INT igmpCounterPortRxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.9 | INTEGER | read-only | Accepted IGMP RX V2 report |
| INT igmpCounterPortRxReportV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.10 | INTEGER | read-only | Accepted IGMP RX V3 report |
| INT igmpCounterPortRxReportV2Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.11 | INTEGER | read-only | Accepted IGMP RX V2 leave |
| INT igmpCounterPortRxReportDropByRate | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.12 | INTEGER | read-only | IGMP RX report reached max message |
| INT igmpCounterPortRxReportDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.13 | INTEGER | read-only | Drop IGMP Rx report Condition: DTag report Report from NNI V3 report under V2 mode |
| INT igmpCounterPortRxReportUnknown | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.14 | INTEGER | read-only | Drop IGMP RX report. Not match configured version |
| INT igmpCounterPortTxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.15 | INTEGER | read-only | Total transmitted IGMP query |
| INT igmpCounterPortTxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.16 | INTEGER | read-only | Transmitted IGMP V1 query |
| INT igmpCounterPortTxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.17 | INTEGER | read-only | Transmitted IGMP V2 query |
| INT igmpCounterPortTxQueryV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.18 | INTEGER | read-only | Transmitted IGMP V3 query |
| INT igmpCounterPortTxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.19 | INTEGER | read-only | Transmitted IGMP specific query |
| INT igmpCounterPortTxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.20 | INTEGER | read-only | Total transmitted IGMP report |
| INT igmpCounterPortTxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.21 | INTEGER | read-only | Transmitted IGMP V1 report |
| INT igmpCounterPortTxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.22 | INTEGER | read-only | Transmitted IGMP V2 report |
| INT igmpCounterPortTxReportV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.23 | INTEGER | read-only | Transmitted IGMP V3 report |
| INT igmpCounterPortTxReportV2Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.24 | INTEGER | read-only | Transmitted IGMP V2 Leave |
| INT igmpCounterPortJoinedGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.25 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Number of current IGMP joined group |
| INT igmpCounterPortJoin | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.26 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP report V3: join group record |
| INT igmpCounterPortLeave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.27 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP leave V3: leave group record |
| INT igmpCounterPortDropByMaxGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.28 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Reached max group |
| INT igmpCounterPortDropByPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.29 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) forbid privilege |
| INT igmpCounterPortDropByMvlan | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.30 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range |
| INT igmpCounterPortDropByOthers | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.31 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview max count Preview max group(16 per port) Match static multicast IP Mode disabled Invalid group IP |
| INT mldCounterPortRxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.32 | INTEGER | read-only | Total accepted MLD RX query |
| INT mldCounterPortRxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.33 | INTEGER | read-only | Accepted MLD RX V1 query |
| INT mldCounterPortRxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.34 | INTEGER | read-only | Accepted MLD RX V2 query |
| INT mldCounterPortRxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.35 | INTEGER | read-only | Accepted MLD RX specific query |
| INT mldCounterPortRxQueryDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.36 | INTEGER | read-only | MLD RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled |
| INT mldCounterPortRxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.37 | INTEGER | read-only | Total accepted MLD RX report+leave |
| INT mldCounterPortRxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.38 | INTEGER | read-only | Accepted MLD RX V1 report |
| INT mldCounterPortRxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.39 | INTEGER | read-only | Accepted MLD RX V2 report |
| INT mldCounterPortRxReportV1Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.40 | INTEGER | read-only | Accepted MLD RX V1 leave |
| INT mldCounterPortRxReportDropByRate | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.41 | INTEGER | read-only | MLD RX report reached max message |
| INT mldCounterPortRxReportDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.42 | INTEGER | read-only | Drop MLD Rx report Condition: DTag report Report from NNI V2 report under V1 mode |
| INT mldCounterPortRxReportUnknown | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.43 | INTEGER | read-only | Drop MLD RX report. Not match configured version |
| INT mldCounterPortTxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.44 | INTEGER | read-only | Total transmitted MLD query |
| INT mldCounterPortTxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.45 | INTEGER | read-only | Transmitted MLD V1 query |
| INT mldCounterPortTxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.46 | INTEGER | read-only | Transmitted MLD V2 query |
| INT mldCounterPortTxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.47 | INTEGER | read-only | Transmitted MLD specific query |
| INT mldCounterPortTxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.48 | INTEGER | read-only | Total transmitted MLD report |
| INT mldCounterPortTxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.49 | INTEGER | read-only | Transmitted MLD V1 report |
| INT mldCounterPortTxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.50 | INTEGER | read-only | Transmitted MLD V2 report |
| INT mldCounterPortTxReportV1Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.51 | INTEGER | read-only | Transmitted MLD V1 Leave |
| INT mldCounterPortJoinedGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.52 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Number of current MLD joined group |
| INT mldCounterPortJoin | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.53 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD report V2: join group record |
| INT mldCounterPortLeave | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.54 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD leave V2: leave group record |
| INT mldCounterPortDropByMaxGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.55 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Reached max group |
| INT mldCounterPortDropByPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.56 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) forbid privilege |
| INT mldCounterPortDropByMvlan | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.57 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range |
| INT mldCounterPortDropByOthers | 1.3.6.1.4.1.890.1.5.13.13.6.13.6.1.58 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview max count Preview max group(16 per port) Match static multicast IP Mode disabled Invalid group IP |
| mgmdStatisticsVlanTable | 1.3.6.1.4.1.890.1.5.13.13.6.13.7 | not-accessible | This table includes IGMP/MLD VLAN statistics information | |
| mgmdStatisticsVlanEntry | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1 | not-accessible | An entry in mgmdStatisticsVlanTable | |
| VLA mgmdCounterVlanId | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.1 | VlanIndex | read-only | VLAN id |
| INT igmpCounterVlanRxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.2 | INTEGER | read-only | Total accepted IGMP RX query |
| INT igmpCounterVlanRxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.3 | INTEGER | read-only | Accepted IGMP RX V1 query |
| INT igmpCounterVlanRxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.4 | INTEGER | read-only | Accepted IGMP RX V2 query |
| INT igmpCounterVlanRxQueryV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.5 | INTEGER | read-only | Accepted IGMP RX V3 query |
| INT igmpCounterVlanRxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.6 | INTEGER | read-only | Accepted IGMP RX specific query |
| INT igmpCounterVlanRxQueryDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.7 | INTEGER | read-only | IGMP RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled |
| INT igmpCounterVlanRxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.8 | INTEGER | read-only | Total accepted IGMP RX report+leave |
| INT igmpCounterVlanRxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.9 | INTEGER | read-only | Accepted IGMP RX V1 report |
| INT igmpCounterVlanRxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.10 | INTEGER | read-only | Accepted IGMP RX V2 report |
| INT igmpCounterVlanRxReportV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.11 | INTEGER | read-only | Accepted IGMP RX V3 report |
| INT igmpCounterVlanRxReportV2Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.12 | INTEGER | read-only | Accepted IGMP RX V2 leave |
| INT igmpCounterVlanRxReportDropByRate | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.13 | INTEGER | read-only | IGMP RX report reached max message |
| INT igmpCounterVlanRxReportDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.14 | INTEGER | read-only | Drop IGMP Rx report Condition: DTag report Report from NNI V3 report under V2 mode |
| INT igmpCounterVlanRxReportUnknown | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.15 | INTEGER | read-only | Drop IGMP RX report. Not match configured version |
| INT igmpCounterVlanTxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.16 | INTEGER | read-only | Total transmitted IGMP query |
| INT igmpCounterVlanTxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.17 | INTEGER | read-only | Transmitted IGMP V1 query |
| INT igmpCounterVlanTxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.18 | INTEGER | read-only | Transmitted IGMP V2 query |
| INT igmpCounterVlanTxQueryV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.19 | INTEGER | read-only | Transmitted IGMP V3 query |
| INT igmpCounterVlanTxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.20 | INTEGER | read-only | Transmitted IGMP specific query |
| INT igmpCounterVlanTxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.21 | INTEGER | read-only | Total transmitted IGMP report |
| INT igmpCounterVlanTxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.22 | INTEGER | read-only | Transmitted IGMP V1 report |
| INT igmpCounterVlanTxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.23 | INTEGER | read-only | Transmitted IGMP V2 report |
| INT igmpCounterVlanTxReportV3 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.24 | INTEGER | read-only | Transmitted IGMP V3 report |
| INT igmpCounterVlanTxReportV2Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.25 | INTEGER | read-only | Transmitted IGMP V2 Leave |
| INT igmpCounterVlanJoinedGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.26 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Number of current IGMP joined group |
| INT igmpCounterVlanJoin | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.27 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP report V3: join group record |
| INT igmpCounterVlanLeave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.28 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Condition: V2: accepted IGMP leave V3: leave group record |
| INT igmpCounterVlanDropByMaxGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.29 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Reached max group |
| INT igmpCounterVlanDropByPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.30 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) forbid privilege |
| INT igmpCounterVlanDropByMvlan | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.31 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range |
| INT igmpCounterVlanDropByOthers | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.32 | INTEGER | read-only | Specific counter(count by each V3 record or V2 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview max count Preview max group(16 per port) Match static multicast IP Mode disabled Invalid group IP |
| INT mldCounterVlanRxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.33 | INTEGER | read-only | Total accepted MLD RX query |
| INT mldCounterVlanRxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.34 | INTEGER | read-only | Accepted MLD RX V1 query |
| INT mldCounterVlanRxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.35 | INTEGER | read-only | Accepted MLD RX V2 query |
| INT mldCounterVlanRxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.36 | INTEGER | read-only | Accepted MLD RX specific query |
| INT mldCounterVlanRxQueryDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.37 | INTEGER | read-only | MLD RX Drop query Condition: Query from UNI port DTag Query IGMP Disabled |
| INT mldCounterVlanRxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.38 | INTEGER | read-only | Total accepted MLD RX report+leave |
| INT mldCounterVlanRxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.39 | INTEGER | read-only | Accepted MLD RX V1 report |
| INT mldCounterVlanRxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.40 | INTEGER | read-only | Accepted MLD RX V2 report |
| INT mldCounterVlanRxReportV1Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.41 | INTEGER | read-only | Accepted MLD RX V1 leave |
| INT mldCounterVlanRxReportDropByRate | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.42 | INTEGER | read-only | MLD RX report reached max message |
| INT mldCounterVlanRxReportDrop | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.43 | INTEGER | read-only | Drop MLD Rx report Condition: DTag report Report from NNI V2 report under V1 mode |
| INT mldCounterVlanRxReportUnknown | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.44 | INTEGER | read-only | Drop MLD RX report. Not match configured version |
| INT mldCounterVlanTxQueryTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.45 | INTEGER | read-only | Total transmitted MLD query |
| INT mldCounterVlanTxQueryV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.46 | INTEGER | read-only | Transmitted MLD V1 query |
| INT mldCounterVlanTxQueryV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.47 | INTEGER | read-only | Transmitted MLD V2 query |
| INT mldCounterVlanTxQuerySpecific | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.48 | INTEGER | read-only | Transmitted MLD specific query |
| INT mldCounterVlanTxReportTotal | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.49 | INTEGER | read-only | Total transmitted MLD report |
| INT mldCounterVlanTxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.50 | INTEGER | read-only | Transmitted MLD V1 report |
| INT mldCounterVlanTxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.51 | INTEGER | read-only | Transmitted MLD V2 report |
| INT mldCounterVlanTxReportV1Leave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.52 | INTEGER | read-only | Transmitted MLD V1 Leave |
| INT mldCounterVlanJoinedGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.53 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Number of current MLD joined group |
| INT mldCounterVlanJoin | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.54 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD report V2: join group record |
| INT mldCounterVlanLeave | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.55 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Condition: V1: accepted MLD leave V2: leave group record |
| INT mldCounterVlanDropByMaxGroup | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.56 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Reached max group |
| INT mldCounterVlanDropByPrivilege | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.57 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) forbid privilege |
| INT mldCounterVlanDropByMvlan | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.58 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Condition: Port doesnot join mvlan Group doesnot match mvlan range |
| INT mldCounterVlanDropByOthers | 1.3.6.1.4.1.890.1.5.13.13.6.13.7.1.59 | INTEGER | read-only | Specific counter(count by each V2 record or V1 report) Condition: Reached max bandwidth Disable privilege profile No privilege profile Preview forbid Preview max count Preview max group(16 per port) Match static multicast IP Mode disabled Invalid group IP |
| mgmdStatisticsOldVerTable | 1.3.6.1.4.1.890.1.5.13.13.6.13.8 | not-accessible | This table includes IGMP/MLD port older version compatible information | |
| mgmdStatisticsOldVerEntry | 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1 | not-accessible | An entry in mgmdStatisticsOldVerTable | |
| INT mgmdOlderVerQuerierIGMPv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.1 | INTEGER | read-only | IGMPv2 report ever received. 1 means had received. |
| INT mgmdOlderVerQuerierMLDv1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.2 | INTEGER | read-only | MLDv1 report ever received. 1 means had received |
| INT mgmdOlderVerHostIGMPv2 | 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.3 | INTEGER | read-only | IGMPv2 Query ever received. 1 means had received |
| INT mgmdOlderVerHostMLDv1 | 1.3.6.1.4.1.890.1.5.13.13.6.13.8.1.4 | INTEGER | read-only | MLDv1 Query ever received. 1 means had received |
| igmpmldLogs | 1.3.6.1.4.1.890.1.5.13.13.6.14 | |||
| igmpmldLogsPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.14.1 | not-accessible | This table includes IGMP/MLD port statistics information | |
| igmpmldLogsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1 | not-accessible | An entry in igmpmldStatisticsPortTable | |
| U32 igmpmldLogsPortTime | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.1 | Unsigned32 | read-only | The time of a log entry |
| INT igmpmldLogsPortSerialNo | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.2 | INTEGER | read-only | The serial number is used to identify the order of logs in the same seconds |
| INT igmpmldLogsPortEvent | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.3 | INTEGER | read-only | The event type of a log entry: join(0) - event of user join a multicast group leave(1) - event of user leave a multicast group drop(2) - event of system drop a multicast goup |
| IPt igmpmldLogsPortGroupAddressType | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.4 | InetAddressType | read-only | The type of address format used for the igmpmldLogsPortGroupAddress |
| IP igmpmldLogsPortGroupAddress | 1.3.6.1.4.1.890.1.5.13.13.6.14.1.1.5 | InetAddress | read-only | The group address of a log entry |
| igmpmldOps | 1.3.6.1.4.1.890.1.5.13.13.6.15 | |||
| POR igmpmldTarget | 1.3.6.1.4.1.890.1.5.13.13.6.15.1 | PortList | read-write | Specifies the target NNI/UNI ifindex or vid for igmpmldmldOperation |
| INT igmpmldOperation | 1.3.6.1.4.1.890.1.5.13.13.6.15.2 | INTEGER | read-write | Clear packet statistics clearIGMPMLDPacketStatistics(1) - clear system-wized packet counters clearIGMPMLDPacketStatisticsOnSpecifiedUNIports(2) - clear packet counter on specified UNI ifindex clearIGMPMLDPacketStatisticsOnSpecifiedNNIports(4) - clear packet counter on specified NNI ifindex clearIGMPMLDPacketStatisticsOnSpecifiedVlan(5) - clear packet counter on specified VLAN |
| INT igmpmldPbit | 1.3.6.1.4.1.890.1.5.13.13.6.16 | INTEGER | read-write | Configure the priority for non-mvlan group proxy report/leave/query, snooping report/leave/LMQ. : 0~8. default 8. 8 stands for using incoming vlan, but auto-genetated query/report uses priority 7. |
| INT igmpmldMvlanMode | 1.3.6.1.4.1.890.1.5.13.13.6.17 | INTEGER | read-write | IGMP or MLD packet mvlan handling mode. disable(0) - disable IGMP or MLD function snooping(2) - packets are handled IGMP or MLD snopping function proxy(3) - packets are handled IGMP or MLD proxy function proxyReport(4) - packets are handled IGMP or MLD proxy Report function |
| igmpmldGenniPortTable | 1.3.6.1.4.1.890.1.5.13.13.6.18 | not-accessible | igmp/mld Genni Configure the NNI port query behavior. | |
| igmpmldGenniPortEntry | 1.3.6.1.4.1.890.1.5.13.13.6.18.1 | not-accessible | ||
| INT igmpmldGenniPortStaticQuerier | 1.3.6.1.4.1.890.1.5.13.13.6.18.1.1 | INTEGER | read-write | 0 - auto :become a query channel after received query. 1 - static : always a query channel; 2 - edge : drop query |
| ip | 1.3.6.1.4.1.890.1.5.13.13.7 | |||
| ipArp | 1.3.6.1.4.1.890.1.5.13.13.7.1 | |||
| INT ipArpOps | 1.3.6.1.4.1.890.1.5.13.13.7.1.1 | INTEGER | read-write | Flush ARP table. |
| ipArpTable | 1.3.6.1.4.1.890.1.5.13.13.7.1.2 | not-accessible | Display the arp table. | |
| ipArpEntry | 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1 | not-accessible | ||
| IP ipAddress | 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1.1 | IpAddress | read-only | The IP that is learned in ARP table. |
| PHY macAddress | 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1.2 | PhysAddress | read-only | The correspond mac address of the ipAddress. |
| STR ipInterface | 1.3.6.1.4.1.890.1.5.13.13.7.1.2.1.3 | DisplayString | read-only | The interface that the ipAddress is learned. |
| ipInband | 1.3.6.1.4.1.890.1.5.13.13.7.2 | |||
| IP ipInbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.2.1 | IpAddress | read-write | Sets the in-band management interface IP address (0.0.0.1 ~ 223.255.255.255). |
| INT ipInbandNetmask | 1.3.6.1.4.1.890.1.5.13.13.7.2.2 | INTEGER | read-write | Sets the in-band management interface subnet mask. |
| VLA ipInbandMgmtVlan | 1.3.6.1.4.1.890.1.5.13.13.7.2.3 | VlanIndex | read-write | Sets in-band mangement VLAN (1~4094). |
| IP ipInbandGateway | 1.3.6.1.4.1.890.1.5.13.13.7.2.4 | IpAddress | read-write | Sets the in-band default gateway's IP address (0.0.0.1 ~ 223.255.255.255). |
| ipv6InbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.2.5 | not-accessible | The table contains ipv6 inband status. | |
| ipv6InbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1 | not-accessible | ||
| INT ipv6InbandIndex | 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1.1 | INTEGER | read-only | The ip inband index. |
| IP ipv6InbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1.2 | InetAddress | read-write | Configures in-band management interface with global IPv6 address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::). |
| INT ipv6InbandNetmask | 1.3.6.1.4.1.890.1.5.13.13.7.2.5.1.3 | INTEGER | read-write | Configures in-band management interface IPv6 global address subnet mask. |
| IP ipv6InbandGateway | 1.3.6.1.4.1.890.1.5.13.13.7.2.7 | InetAddress | read-write | Configures global IPv6 address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::) for the inband IPv6 default outgoing gateway. |
| INT ipInbandMgmtPbit | 1.3.6.1.4.1.890.1.5.13.13.7.2.10 | INTEGER | read-write | Sets in-band mangement pbit. |
| IP ipv6InbandLinkLocalAddress | 1.3.6.1.4.1.890.1.5.13.13.7.2.11 | InetAddress | read-only | In-of-band IPv6 Link-local Address |
| INT ipInbandDhcpClientConfig | 1.3.6.1.4.1.890.1.5.13.13.7.2.15 | INTEGER | read-write | Enable DHCP client to MGMT inband interface. disable(0) is only for status display. |
| INT ipInbandDhcpClientOption | 1.3.6.1.4.1.890.1.5.13.13.7.2.16 | INTEGER | read-write | Renew or release DHCP client to MGMT inband interface. |
| INT ipv6InbandDhcpClientConfig | 1.3.6.1.4.1.890.1.5.13.13.7.2.17 | INTEGER | read-write | Enable DHCP client to MGMT inband v6 interface. disable(0) is only for status display. |
| INT ipv6InbandDhcpClientOption | 1.3.6.1.4.1.890.1.5.13.13.7.2.18 | INTEGER | read-write | Renew or release DHCP client to MGMT inband v6 interface. |
| IP ipInbandDynamicAddress | 1.3.6.1.4.1.890.1.5.13.13.7.2.19 | IpAddress | read-only | Gets the in-band management interface IP address (0.0.0.1 ~ 223.255.255.255). |
| IP ipInbandDynamicGateway | 1.3.6.1.4.1.890.1.5.13.13.7.2.20 | IpAddress | read-only | Gets the in-band dynamic gateway's IP address (0.0.0.1 ~ 223.255.255.255). |
| ipOutband | 1.3.6.1.4.1.890.1.5.13.13.7.3 | |||
| IP ipOutbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.3.1 | IpAddress | read-write | Sets the out-of-band management interface IP address (0.0.0.1 ~ 223.255.255.255). |
| INT ipOutbandNetmask | 1.3.6.1.4.1.890.1.5.13.13.7.3.2 | INTEGER | read-write | Sets the out-of-band management interface subnet mask. |
| ipv6OutbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.3.3 | not-accessible | The table contains ipv6 outband status. | |
| ipv6OutbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1 | not-accessible | ||
| INT ipv6OutbandIndex | 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1.1 | INTEGER | read-only | The ipv6 outband index. |
| IP ipv6OutbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1.2 | InetAddress | read-write | Configures out-of-band management interface with IPv6 global address (2000:: ~ 3fff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) or IPv6 address with all zeros (::). |
| INT ipv6OutbandNetmask | 1.3.6.1.4.1.890.1.5.13.13.7.3.3.1.3 | INTEGER | read-write | Configures out-of-band management interface IPv6 global address subnet mask. |
| IP ipoutbandGateway | 1.3.6.1.4.1.890.1.5.13.13.7.3.5 | IpAddress | read-write | Sets the out-band default gateway's IP address (0.0.0.1 ~ 223.255.255.255). |
| INT ipoutbandDhcpClientConfig | 1.3.6.1.4.1.890.1.5.13.13.7.3.6 | INTEGER | read-write | Enable DHCP client to MGMT outband interface. disable(0) is only for status display. |
| INT ipoutbandDhcpClientOption | 1.3.6.1.4.1.890.1.5.13.13.7.3.7 | INTEGER | read-write | Renew or release DHCP client to MGMT outband interface. |
| INT ipv6outbandDhcpClientConfig | 1.3.6.1.4.1.890.1.5.13.13.7.3.8 | INTEGER | read-write | Enable DHCP client to MGMT outband v6 interface. disable(0) is only for status display. |
| INT ipv6outbandDhcpClientOption | 1.3.6.1.4.1.890.1.5.13.13.7.3.9 | INTEGER | read-write | Renew or release DHCP client to MGMT outband v6 interface. |
| IP ipv6OutbandLinkLocalAddress | 1.3.6.1.4.1.890.1.5.13.13.7.3.10 | InetAddress | read-only | Out-of-band IPv6 Link-local Address |
| IP ipOutbandDynamicAddress | 1.3.6.1.4.1.890.1.5.13.13.7.3.11 | IpAddress | read-only | Gets the out-of-band management interface IP address (0.0.0.1 ~ 223.255.255.255). |
| IP ipoutbandDynamicGateway | 1.3.6.1.4.1.890.1.5.13.13.7.3.12 | IpAddress | read-only | Gets the out-band dynamic gateway's IP address (0.0.0.1 ~ 223.255.255.255). |
| INT ipv6DefaultMgmt | 1.3.6.1.4.1.890.1.5.13.13.7.4 | INTEGER | read-write | Sets which traffic flow (in-band or out-of-band) the Switch sends packet originating from itself (such as SNMP traps) or packets with unknown source. |
| ipRoute | 1.3.6.1.4.1.890.1.5.13.13.7.5 | |||
| INT ipMaxNumOfStaticRoutes | 1.3.6.1.4.1.890.1.5.13.13.7.5.1 | INTEGER | read-only | The maximum number of static routes supported by the system. |
| ipStaticRouteTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.2 | not-accessible | Configures a static route. | |
| ipStaticRouteEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1 | not-accessible | ||
| IP ipStaticRouteDest | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.1 | IpAddress | read-only | Destination subnet address 0.0.0.0 ~ 223.255.255.255 |
| INT ipStaticRouteMask | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.2 | INTEGER | read-only | Destination subnet mask |
| IP ipStaticRouteNextHop | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.3 | IpAddress | read-create | Next hop address 0.0.0.0 ~ 223.255.255.255 |
| ROW ipStaticRouteRowStatus | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.4 | RowStatus | read-create | |
| STR ipStaticRouteIfName | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.5 | DisplayString | read-only | Destination interface name |
| INT ipStaticRouteMetric | 1.3.6.1.4.1.890.1.5.13.13.7.5.2.1.6 | INTEGER | read-write | Destination interface metric |
| ipRouteTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.3 | not-accessible | Display routing table. | |
| ipRouteEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1 | not-accessible | ||
| IP ipRouteDest | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.1 | IpAddress | read-only | Destination subnet address 0.0.0.0 ~ 223.255.255.255 |
| INT ipRouteMask | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.2 | INTEGER | read-only | Destination subnet mask |
| IP ipRouteNextHop | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.3 | IpAddress | read-only | Next hop address 0.0.0.0 ~ 223.255.255.255 |
| STR ipRouteIfName | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.4 | DisplayString | read-only | Destination interface name |
| INT ipRouteMetric | 1.3.6.1.4.1.890.1.5.13.13.7.5.3.1.5 | INTEGER | read-only | Destination interface metric |
| ipv6DefaultRouterInbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.4 | not-accessible | Show IPv6 inband default-router. | |
| ipv6DefaultRouterInbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1 | not-accessible | ||
| IP ipv6DefaultRouterInbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.1 | InetAddress | read-only | Show IPv6 default-router inband Address. |
| STR ipv6DefaultRouterInbandPreference | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.2 | DisplayString | read-only | Show IPv6 default-router inband Preference |
| INT ipv6DefaultRouterInbandLifetime | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.3 | INTEGER | read-only | Show IPv6 default-router inband lifetime (Unit: sec) |
| STR ipv6DefaultRouterInbandExpire | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.4 | DisplayString | read-only | Show IPv6 default-router inband expire |
| STR ipv6DefaultRouterInbandFlag | 1.3.6.1.4.1.890.1.5.13.13.7.5.4.1.5 | DisplayString | read-only | Show IPv6 default-router inband flag |
| ipv6DefaultRouterOutbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.5 | not-accessible | Show IPv6 outband default-router. | |
| ipv6DefaultRouterOutbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1 | not-accessible | ||
| IP ipv6DefaultRouterOutbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.1 | InetAddress | read-only | Show IPv6 default-router outband Address. |
| STR ipv6DefaultRouterOutbandPreference | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.2 | DisplayString | read-only | Show IPv6 default-router outband Preference |
| INT ipv6DefaultRouterOutbandLifetime | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.3 | INTEGER | read-only | Show IPv6 default-router outband lifetime. (Unit: sec) |
| STR ipv6DefaultRouterOutbandExpire | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.4 | DisplayString | read-only | Show IPv6 default-router outband expire |
| STR ipv6DefaultRouterOutbandFlag | 1.3.6.1.4.1.890.1.5.13.13.7.5.5.1.5 | DisplayString | read-only | Show IPv6 default-router outband flag |
| ipv6RouteInbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.6 | not-accessible | Show IPv6 inband route | |
| ipv6RouteInbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1 | not-accessible | ||
| IP ipv6RouteInbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1.1 | InetAddress | read-only | Show IPv6 inband route Address. |
| INT ipv6RouteInbandMask | 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1.2 | INTEGER | read-only | Show IPv6 inband route address mask. |
| STR ipv6RouteInbandName | 1.3.6.1.4.1.890.1.5.13.13.7.5.6.1.3 | DisplayString | read-only | Show IPv6 inband route Gateway/Interface Name |
| ipv6RouteOutbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.5.7 | not-accessible | Show IPv6 outband route | |
| ipv6RouteOutbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1 | not-accessible | ||
| IP ipv6RouteOutbandAddress | 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1.1 | InetAddress | read-only | Show IPv6 outband route Address. |
| INT ipv6RouteOutbandMask | 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1.2 | INTEGER | read-only | Show IPv6 inband route address mask. |
| STR ipv6RouteOutbandName | 1.3.6.1.4.1.890.1.5.13.13.7.5.7.1.3 | DisplayString | read-only | Show IPv6 Outband route Gateway/Interface Name |
| ipStatistic | 1.3.6.1.4.1.890.1.5.13.13.7.6 | |||
| INT ipInbandInOctetCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.1 | INTEGER | read-only | |
| INT ipInbandInUnicastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.2 | INTEGER | read-only | |
| INT ipInbandInMulticastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.3 | INTEGER | read-only | |
| INT ipInbandInDiscardCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.4 | INTEGER | read-only | |
| INT ipInbandInErrorCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.5 | INTEGER | read-only | |
| INT ipInbandOutOctetCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.7 | INTEGER | read-only | |
| INT ipInbandOutUnicastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.8 | INTEGER | read-only | |
| INT ipInbandOutDiscardCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.10 | INTEGER | read-only | |
| INT ipInbandOutErrorCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.11 | INTEGER | read-only | |
| INT ipOutbandInOctetCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.12 | INTEGER | read-only | |
| INT ipOutbandInUnicastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.13 | INTEGER | read-only | |
| INT ipOutbandInMulticastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.14 | INTEGER | read-only | |
| INT ipOutbandInDiscardCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.15 | INTEGER | read-only | |
| INT ipOutbandInErrorCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.16 | INTEGER | read-only | |
| INT ipOutbandOutOctetCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.17 | INTEGER | read-only | |
| INT ipOutbandOutUnicastCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.18 | INTEGER | read-only | |
| INT ipOutbandOutDiscardCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.19 | INTEGER | read-only | |
| INT ipOutbandOutErrorCount | 1.3.6.1.4.1.890.1.5.13.13.7.6.20 | INTEGER | read-only | |
| ipv6Prefix | 1.3.6.1.4.1.890.1.5.13.13.7.9 | |||
| ipv6PrefixInbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.9.1 | not-accessible | Show IPv6 inband prefix | |
| ipv6PrefixInbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.9.1.1 | not-accessible | ||
| IP ipv6PrefixInbandPrefix | 1.3.6.1.4.1.890.1.5.13.13.7.9.1.1.1 | InetAddress | read-only | Show IPv6 inband prefix address. |
| INT ipv6PrefixInbandPrefixLength | 1.3.6.1.4.1.890.1.5.13.13.7.9.1.1.2 | INTEGER | read-only | Show IPv6 inband prefix length. |
| ipv6PrefixOutbandTable | 1.3.6.1.4.1.890.1.5.13.13.7.9.2 | not-accessible | Show IPv6 outband prefix | |
| ipv6PrefixOutbandEntry | 1.3.6.1.4.1.890.1.5.13.13.7.9.2.1 | not-accessible | ||
| IP ipv6PrefixOutbandPrefix | 1.3.6.1.4.1.890.1.5.13.13.7.9.2.1.1 | InetAddress | read-only | Show IPv6 outband prefix address. |
| INT ipv6PrefixOutbandPrefixLength | 1.3.6.1.4.1.890.1.5.13.13.7.9.2.1.2 | INTEGER | read-only | Show IPv6 outband prefix length. |
| INT ipDefaultGateway | 1.3.6.1.4.1.890.1.5.13.13.7.10 | INTEGER | read-write | Set the inband or outband gateway as the default gateway |
| ipL3Routing | 1.3.6.1.4.1.890.1.5.13.13.7.21 | |||
| routingIfaceSetup | 1.3.6.1.4.1.890.1.5.13.13.7.21.1 | |||
| INT maxNumOfRouterIp | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.5 | INTEGER | read-only | |
| routerIpTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6 | not-accessible | ||
| routerIpEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1 | not-accessible | An entry in inbandIpTable. | |
| INT routerIpEntryVid | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.1 | INTEGER | read-only | |
| IP routerIpEntryIp | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.2 | IpAddress | read-only | |
| IP routerIpEntrySubnetMask | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.3 | IpAddress | read-only | |
| ROW routerIpEntryRowStatus | 1.3.6.1.4.1.890.1.5.13.13.7.21.1.6.1.4 | RowStatus | read-create | |
| layer3Setup | 1.3.6.1.4.1.890.1.5.13.13.7.21.2 | |||
| INT routerRipDistance | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.1 | INTEGER | read-write | The administrative distance of RIP routes |
| INT routerRipUpdateTimer | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.2 | INTEGER | read-only | The update timer of RIP routes |
| INT routerRipInvalidTimer | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.3 | INTEGER | read-only | The invalid timer of RIP routes |
| INT routerRipFlushTimer | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.4 | INTEGER | read-only | The flush timer of RIP routes |
| ripRoutingTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5 | not-accessible | ||
| ripRoutingTableEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1 | not-accessible | An entry in ripRoutingTable. | |
| INT ripRoutingIndex | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.1 | INTEGER | read-only | |
| IP ripRoutingDest | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.2 | IpAddress | read-only | |
| INT ripRoutingMask | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.3 | INTEGER | read-only | |
| IP ripRoutingGateway | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.4 | IpAddress | read-only | |
| INT ripRoutingMetric | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.5 | INTEGER | read-only | |
| IP ripRoutingFrom | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.6 | IpAddress | read-only | |
| STR ripRoutingTime | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.7 | DisplayString | read-only | |
| STR ripRoutingType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.5.1.8 | DisplayString | read-only | |
| ospfSettings | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6 | |||
| IP ospfRouterId | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.1 | IpAddress | read-write | OSPF router id. Range: 0.0.0.1 ~ 255.255.255.255 Set 0.0.0.0 to remove router id setting |
| INT ospfDistance | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.2 | INTEGER | read-write | OSPF distance, range: 1 ~ 255 Default: 15 |
| INT ospfRedistributeStatic | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.3 | INTEGER | read-write | Enable redistribute static route, need to be set via multiple variable binding with ospfRedistributeStaticMetricType and ospfRedistributeStaticMetric |
| INT ospfRedistributeStaticMetricType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.4 | INTEGER | read-write | Set redistribute static route metric type Default: 1 1(1): External Type 1, add up the cost toward the destination 2(2): External Type 2, with default metric of 20 and will never change/increment through every hops |
| INT ospfRedistributeStaticMetric | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.5 | INTEGER | read-write | Set redistribute static route metric Default: 15 |
| INT ospfRedistributeRip | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.6 | INTEGER | read-write | Enable redistribute RIP, need to be set via multiple variable binding with ospfRedistributeRipMetricType and ospfRedistributeRipMetric |
| INT ospfRedistributeRipMetricType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.7 | INTEGER | read-write | Set redistribute RIP metric type Default: 1 1(1): External Type 1, add up the cost toward the destination 2(2): External Type 2, with default metric of 20 and will never change/increment through every hops |
| INT ospfRedistributeRipMetric | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.6.8 | INTEGER | read-write | Set redistribute RIP metric Default: 15 |
| ospfNetworkTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7 | not-accessible | ||
| ospfNetworkTableEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1 | not-accessible | An entry in ospfNetworkTable. | |
| IP ospfNetworkAddress | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.1 | IpAddress | read-only | OSPF network IP address. Range: 0.0.0.1 ~ 223.255.255.255 |
| INT ospfNetworkMask | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.2 | INTEGER | read-only | OSPF network mask. Range: 1 ~ 32 |
| IP ospfNetworkAreaId | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.3 | IpAddress | read-only | OSPF network area ID. Range: 0.0.0.0 ~ 255.255.255.255 |
| ROW ospfNetworkRowStatus | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.7.1.4 | RowStatus | read-create | Row status of OSPF network. |
| ospfAreaTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8 | not-accessible | ||
| ospfAreaTableEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1 | not-accessible | An entry in ospfAreaTable. | |
| IP ospfAreaEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.1 | IpAddress | read-only | OSPF area ID. |
| INT ospfAreaEntryType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.2 | INTEGER | read-write | OSPF area type. |
| INT ospfAreaEntryDefaultCost | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.3 | INTEGER | read-write | OSPF area default cost, can be set only when current area is stub or NSSA area. Default: 15 |
| INT ospfAreaEntryAuthProtocol | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.4 | INTEGER | read-write | OSPF area authentication type. |
| ROW ospfArearEntryRowStatus | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.8.1.5 | RowStatus | read-create | Row status of OSPF area |
| ospfRoutingTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9 | not-accessible | ||
| ospfRoutingTableEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1 | not-accessible | An entry in ospfRoutingTable. | |
| INT ospfRoutingIndex | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.1 | INTEGER | read-only | Index of OSPF routing table |
| INT ospfRoutingRouteType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.2 | INTEGER | read-only | Route type |
| INT ospfRoutingAreaType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.3 | INTEGER | read-only | Routing area type |
| IP ospfRoutingDest | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.4 | IpAddress | read-only | Prefix/router ID |
| INT ospfRoutingMask | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.5 | INTEGER | read-only | |
| IP ospfRoutingGateway | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.6 | IpAddress | read-only | |
| INT ospfRoutingMetric | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.7 | INTEGER | read-only | |
| STR ospfRoutingVia | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.8 | DisplayString | read-only | Routing interface where ospfRoutingDest from |
| STR ospfRoutingRouterType | 1.3.6.1.4.1.890.1.5.13.13.7.21.2.9.1.9 | DisplayString | read-only | Neighboring router type |
| routerDomainSetup | 1.3.6.1.4.1.890.1.5.13.13.7.21.3 | |||
| routerDomainIpTable | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1 | not-accessible | ||
| routerDomainIpEntry | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1 | not-accessible | An entry in routerDomainIpTable. | |
| INT routerDomainIpVid | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.1 | INTEGER | read-only | |
| INT routerDomainIpRipDirection | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.2 | INTEGER | read-write | |
| INT routerDomainIpRipVersion | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.3 | INTEGER | read-write | |
| INT routerDomainIpOspfCost | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.4 | INTEGER | read-write | OSPF interface cost. Range: 1 ~ 65535 Default: 15 |
| INT routerDomainIpOspfPriority | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.5 | INTEGER | read-write | OSPF interface priority. Range: 0 ~ 255 Default: 1 |
| INT routerDomainIpOspfRetransmitInterval | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.6 | INTEGER | read-write | OSPF interface retransmit interval. Range: 1 ~ 65535 Default: 5 |
| INT routerDomainIpOspfTransmitDelay | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.7 | INTEGER | read-write | OSPF interface transmit delay. Range: 1 ~ 65535 Default: 1 |
| INT routerDomainIpOspfDeadInterval | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.8 | INTEGER | read-write | OSPF interface dead interval. Range: 1 ~ 65535 Default: 40 |
| INT routerDomainIpOspfHelloInterval | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.9 | INTEGER | read-write | OSPF interface hello interval. Range: 1 ~ 65535 Default: 10 |
| INT routerDomainIpOspfPassive | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.10 | INTEGER | read-write | Set OSPF passive interface |
| INT routerDomainIpOspfAuth | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.11 | INTEGER | read-write | OSPF interface authentication type. |
| STR routerDomainIpOspfAuthSimpleKey | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.12 | DisplayString | read-write | OSPF simple key, 8 printable characters. Simple key can only be set when authentication method is set as 'simple(1)' Set null string to remove simple key setting |
| INT routerDomainIpOspfMd5KeyId | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.13 | INTEGER | read-write | OSPF interface message-digest key ID. Range: 1 ~ 255 0 indicates key ID is not set. |
| STR routerDomainIpOspfMd5Key | 1.3.6.1.4.1.890.1.5.13.13.7.21.3.1.1.14 | DisplayString | read-write | OSPF interface message-digest key, 16 printable characters. MD5 key can only be set when authentication method is set as 'md5(2)', key id and key must can be set only via variable binding option. Set null string to remove message-digest key setting |
| lcman | 1.3.6.1.4.1.890.1.5.13.13.8 | |||
| slotModuleTable | 1.3.6.1.4.1.890.1.5.13.13.8.1 | not-accessible | The table which contains the slot information in a chassis. | |
| slotModuleEntry | 1.3.6.1.4.1.890.1.5.13.13.8.1.1 | not-accessible | ||
| INT slotModuleId | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.1 | INTEGER | read-only | Identity of the slot. |
| INT slotModuleCardType | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.2 | INTEGER | read-only | Card type of the plug-in card. |
| STR slotModuleDescr | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.4 | DisplayString | read-only | The descriptions of the plug-in card. |
| INT slotModuleStatus | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.5 | INTEGER | read-only | The module state of the plug-in card. |
| INT slotModuleAlarmStatus | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.6 | INTEGER | read-only | This variable indicates the alarm status of the module and would be aligned with MSC/line-card alarm LED. hasAlarm(1) there is at least one critical current alarm realted to the module noAlarm(2) there are no critical current alarms related to the module |
| STR slotModuleHWVersion | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.7 | DisplayString | read-only | The hardware version of the plug-in card |
| STR slotModuleSerialNumber | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.8 | DisplayString | read-only | The serial number of the plug-in card |
| INT slotModuleUpTime | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.10 | INTEGER | read-only | The time (in seconds) since the plug-in card was last re-initialized. |
| INT slotModuleAdminState | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.11 | INTEGER | read-write | Enable/disable specified slot |
| INT slotModuleReset | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.12 | INTEGER | read-write | Write reset(1) to reset the slot. Always return noAction(0). |
| INT slotModuleReProvision | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.13 | INTEGER | read-write | Write 1 to re-provision the slot. Always return noAction(0). |
| STR slotModuleDriverInfo | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.14 | DisplayString | read-only | The driver information of the plug-in card, multiple versions are seperated by ',' |
| STR slotModuleImage1FwVersion | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.15 | DisplayString | read-only | The image-1 version of the plug-in card |
| STR slotModuleImage2FwVersion | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.16 | DisplayString | read-only | The image-2 version of the plug-in card |
| STR slotModuleBootupFwVersion | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.17 | DisplayString | read-only | The running firmware version of the plug-in card |
| INT slotModuleBootupImage | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.18 | INTEGER | read-write | Plug-in card's firmware image index used for system boot up. |
| INT slotModuleFwUpgradeStatus | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.19 | INTEGER | read-only | Device returns swDownloading(1) - if the downloading process is on going. Device returns swDownloadedSuccessfully(2) - if the downloading process is successfully. Device returns swDownloadedTimeout(3) - if the downloading process is timeout. Device returns swImageFileError(4) - if the downloaded image file has error CRC. Device returns swInstalling(5) - if the downloaded image file is installing (EAN is restarting). Device returns swInstallingError(6) - if EAN failed to installing downloaded image file. Device returns swInstallSuccessfully(7) - if EAN installed downloaded image file successfully. Device returns swRestoreSuccessfully(8) - if EAN restored SW successfully. Device returns swRevertSuccessfully(9) - if EAN reverted to old SW successfully. Device returns idle(10) - if EAN didn't get any SW downloading command after system booted up. Device returns unKnownError(11) - if the installing process is terminated due to NE restart by unknown reason |
| MAC slotModuleMacAddress | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.20 | MacAddress | read-only | MAC address of plug-in card |
| INT slotModuleRunningImage | 1.3.6.1.4.1.890.1.5.13.13.8.1.1.21 | INTEGER | read-only | The running firmware image index |
| login | 1.3.6.1.4.1.890.1.5.13.13.9 | |||
| INT loginMaxNumOfUsers | 1.3.6.1.4.1.890.1.5.13.13.9.1 | INTEGER | read-only | The maximum number of login user accounts supported by the system. |
| loginUserTable | 1.3.6.1.4.1.890.1.5.13.13.9.2 | not-accessible | Login account configuration table. | |
| loginUserEntry | 1.3.6.1.4.1.890.1.5.13.13.9.2.1 | not-accessible | ||
| STR loginUserName | 1.3.6.1.4.1.890.1.5.13.13.9.2.1.1 | DisplayString | read-only | Name of user account. |
| STR loginUserPassword | 1.3.6.1.4.1.890.1.5.13.13.9.2.1.2 | DisplayString | read-write | Password of user account. |
| INT loginUserPrivilege | 1.3.6.1.4.1.890.1.5.13.13.9.2.1.3 | INTEGER | read-write | Assigns a privilege level to the specified account. The privilege level is applied the next time the user logs in. |
| ROW loginUserRowStatus | 1.3.6.1.4.1.890.1.5.13.13.9.2.1.4 | RowStatus | read-create | |
| loopguard | 1.3.6.1.4.1.890.1.5.13.13.10 | |||
| loopguardConfPortTable | 1.3.6.1.4.1.890.1.5.13.13.10.1 | not-accessible | Loop guard configuration table | |
| loopguardConfPortEntry | 1.3.6.1.4.1.890.1.5.13.13.10.1.1 | not-accessible | ||
| INT loopguardConfPortEnable | 1.3.6.1.4.1.890.1.5.13.13.10.1.1.1 | INTEGER | read-write | Enable/Disable loop guard function for specific port. |
| INT loopguardConfPortPolicy | 1.3.6.1.4.1.890.1.5.13.13.10.1.1.2 | INTEGER | read-write | Configures the policy when loop condition is detected. fix : shutdown the port, user needs to enable the port manually dynamic : shutdown the port, and recovered after recover time |
| INT loopguardConfPortRecoverTime | 1.3.6.1.4.1.890.1.5.13.13.10.1.1.3 | INTEGER | read-write | Configures the recover time for dynamic policy. |
| loopguardStatsPortTable | 1.3.6.1.4.1.890.1.5.13.13.10.3 | not-accessible | Loop guard port statistics table | |
| loopguardStatsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.10.3.1 | not-accessible | ||
| INT loopguardStatsPortLinkedState | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.1 | INTEGER | read-only | Displays linked state on specific port. |
| C32 loopguardStatsPortTxPktsEx | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.2 | Counter32 | read-only | Displays counter of transmited loopguard probe packet on specific port. |
| C32 loopguardStatsPortRxPkts | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.3 | Counter32 | read-only | Displays counter of received loopguard probe packet on specific port. |
| C32 loopguardStatsPortBadPkts | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.4 | Counter32 | read-only | Displays counter of received bad loopguard probe packet on specific port. The bad loopguard probe packet will not trigger loopguard block port mechanism. loopguardStatsPortRxPkts minus loopguardStatsPortBadPkts represents the number of received loopguard packet which will trigger loopguard block port mechanism. The bad loopguard probe packet includes the loopguard packet with incorrect checksum, the loopguard packet with time-out time stamp, and the loopguard packet with wrong content in TLV fields. |
| STR loopguardStatsPortShutdownTime | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.5 | DisplayString | read-only | Displays port shutdown time for loopguard detection on specific port. |
| INT loopguardStatsPortOperation | 1.3.6.1.4.1.890.1.5.13.13.10.3.1.6 | INTEGER | read-write | 1 : Clears loopguard statistics (packet counter) on specific port. |
| loopguardUniVlanTable | 1.3.6.1.4.1.890.1.5.13.13.10.4 | not-accessible | Loop guard configuration table | |
| loopguardUniVlanEntry | 1.3.6.1.4.1.890.1.5.13.13.10.4.1 | not-accessible | ||
| INT loopguardUniVlanVid | 1.3.6.1.4.1.890.1.5.13.13.10.4.1.1 | INTEGER | read-only | 1 to 4094 is normal vlan id |
| INT loopguardUniVlanPbit | 1.3.6.1.4.1.890.1.5.13.13.10.4.1.2 | INTEGER | read-write | |
| ROW loopguardUniVlanRowStatus | 1.3.6.1.4.1.890.1.5.13.13.10.4.1.3 | RowStatus | read-create | use 4(create and go) to create new row |
| interworking | 1.3.6.1.4.1.890.1.5.13.13.11 | |||
| atmvc | 1.3.6.1.4.1.890.1.5.13.13.11.1 | |||
| INT atmMaxNumOfVcPerPort | 1.3.6.1.4.1.890.1.5.13.13.11.1.1 | INTEGER | read-only | The maximum number of VC per port. |
| atmvcTable | 1.3.6.1.4.1.890.1.5.13.13.11.1.2 | not-accessible | ATM VC configuration table | |
| atmvcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1 | not-accessible | ||
| INT atmvcVpi | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.1 | INTEGER | read-only | |
| INT atmvcVci | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.2 | INTEGER | read-only | |
| INT atmvcPriority | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.3 | INTEGER | read-create | The QoS priority of the ATM VC. The QoS priority must be unique in the VCs in the same UNI port. |
| INT atmvcEncap | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.4 | INTEGER | read-create | llc: LLC encapsulation vc: VC-MUX encapsulation |
| ROW atmvcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.1.2.1.7 | RowStatus | read-create | Row status of the table entry. |
| portIsolation | 1.3.6.1.4.1.890.1.5.13.13.11.2 | |||
| INT portIsolationEnable | 1.3.6.1.4.1.890.1.5.13.13.11.2.1 | INTEGER | read-write | Enable/Disable isolation between UNI ports |
| vlanGlobal | 1.3.6.1.4.1.890.1.5.13.13.11.3 | |||
| U32 vlanStagTpid | 1.3.6.1.4.1.890.1.5.13.13.11.3.1 | Unsigned32 | read-write | Configures S-tag TPID value |
| U32 vlanCtagTpid | 1.3.6.1.4.1.890.1.5.13.13.11.3.3 | Unsigned32 | read-write | Configures C-tag TPID value |
| vlanPortPvidTable | 1.3.6.1.4.1.890.1.5.13.13.11.3.4 | not-accessible | Display the arp table. | |
| vlanPortPvidEntry | 1.3.6.1.4.1.890.1.5.13.13.11.3.4.1 | not-accessible | ||
| INT vlanPortPvidValue | 1.3.6.1.4.1.890.1.5.13.13.11.3.4.1.1 | INTEGER | read-write | port PVID |
| INT vlanPortPbitValue | 1.3.6.1.4.1.890.1.5.13.13.11.3.4.1.2 | INTEGER | read-write | port pbit |
| vlanPortCopyCpbitTable | 1.3.6.1.4.1.890.1.5.13.13.11.3.5 | not-accessible | Copy Cpbit to Spbit | |
| vlanPortCopyCpbitEntry | 1.3.6.1.4.1.890.1.5.13.13.11.3.5.1 | not-accessible | ||
| INT vlanPortCopyCpbitValue | 1.3.6.1.4.1.890.1.5.13.13.11.3.5.1.1 | INTEGER | read-write | port copy Cpbit to Spbit |
| INT vlanTagMode | 1.3.6.1.4.1.890.1.5.13.13.11.3.6 | INTEGER | read-write | Configures vlan tag mode. Packets sent from NNI tagged with S or C tag |
| vlanPortFrameTypeTable | 1.3.6.1.4.1.890.1.5.13.13.11.3.8 | not-accessible | Configures accepted frame type incoming to this interface. | |
| vlanPortFrameTypeEntry | 1.3.6.1.4.1.890.1.5.13.13.11.3.8.1 | not-accessible | Configures accepted frame type incoming to this interface. | |
| INT vlanPortFrameType | 1.3.6.1.4.1.890.1.5.13.13.11.3.8.1.1 | INTEGER | read-write | Configures accepted frame type incoming to this interface. |
| vlanTrunk | 1.3.6.1.4.1.890.1.5.13.13.11.6 | |||
| vlanTrunkUntagPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.1 | not-accessible | Cross-connects untagged packet in the specified UNI PTM ports to the specified S VLAN or S + C VLAN on NNI ports. | |
| vlanTrunkUntagPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1 | not-accessible | ||
| INT vlanTrunkUntagPortMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.1 | INTEGER | read-write | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| VLA vlanTrunkUntagPortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.2 | VlanIndex | read-write | NNI S-tag VLAN ID |
| INT vlanTrunkUntagPortNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.3 | INTEGER | read-write | NNI S-tag pbit |
| VLA vlanTrunkUntagPortNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.4 | VlanIndex | read-write | NNI C-tag VLAN ID. if vlanTrunkUntagPortMode is sVlan(1), the value will be ignored and always return 0. |
| INT vlanTrunkUntagPortNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.5 | INTEGER | read-write | NNI C-tag pbit. if vlanTrunkUntagPortMode is sVlan(1), the value will be ignored and always return 0. |
| ROW vlanTrunkUntagPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.1.1.6 | RowStatus | read-create | Row status of the table entry. |
| vlanTrunkUntagEtypePortTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.2 | not-accessible | Cross-connects untagged packet from the specified UNI PTM ports to the specified S VLAN or S + C VLAN on NNI ports per Etyer Type field in the packet. | |
| vlanTrunkUntagEtypePortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1 | not-accessible | ||
| U32 vlanTrunkUntagEtypePortEtype | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.1 | Unsigned32 | read-only | Ether type |
| INT vlanTrunkUntagEtypePortMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.2 | INTEGER | read-write | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| VLA vlanTrunkUntagEtypePortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.3 | VlanIndex | read-write | NNI S-tag VLAN ID |
| INT vlanTrunkUntagEtypePortNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.4 | INTEGER | read-write | NNI S-tag pbit |
| VLA vlanTrunkUntagEtypePortNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.5 | VlanIndex | read-write | NNI C-tag VLAN ID. if vlanTrunkUntagEtypePortMode is sVlan(1), the value will be ignored and always return 0. |
| INT vlanTrunkUntagEtypePortNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.6 | INTEGER | read-write | NNI C-tag pbit. if vlanTrunkUntagEtypePortMode is sVlan(1), the value will be ignored and always return 0. |
| ROW vlanTrunkUntagEtypePortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.2.1.7 | RowStatus | read-create | Row status of the table entry. |
| vlanTrunkTagPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.3 | not-accessible | Cross-connects uni-vid tagged packet in the specified UNI PTM ports to the S(uni-vid) VLAN if S VLAN is not specified or S(svid) + C(uni-vid) on NNI ports if S VLAN is specified. | |
| vlanTrunkTagPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1 | not-accessible | ||
| VLA vlanTrunkTagPortUniNniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.1 | VlanIndex | read-only | UNI VLAN ID. This VLAN is also used as S VLAN ID or C VLAN ID depends on which NNI VLAN tagging mode is configured. |
| INT vlanTrunkTagPortMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.2 | INTEGER | read-write | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| VLA vlanTrunkTagPortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.3 | VlanIndex | read-write | NNI S VLAN ID. This field is used when vlanTrunkTagPortMode is configured as sPlusCxVlan(2). |
| ROW vlanTrunkTagPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.3.1.4 | RowStatus | read-create | Row status of the table entry. |
| vlanTrunkUntagSubnetPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.4 | not-accessible | Cross-connects untagged packet from the specified UNI PTM ports to the specified S VLAN or S + C VLAN on NNI ports for specified IP subnet in the packet. | |
| vlanTrunkUntagSubnetPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1 | not-accessible | ||
| IPt vlanTrunkUntagSubnetPortIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.1 | InetAddressType | read-only | VLAN trunk subnet IP address type |
| IP vlanTrunkUntagSubnetPortIpAddress | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.2 | InetAddress | read-only | VLAN trunk subnet IP address 0.0.0.0 ~ 223.255.255.255 ::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff ipv4 address input format: # 0x00 0x00 0x00 0x00 ipv6 address input format: # 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Limit: vlanTrunkUntagSubnetPortIpAddressType must be set before vlanTrunkUntagSubnetPortIpAddress. |
| INT vlanTrunkUntagSubnetPortIpMask | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.3 | INTEGER | read-only | The netmask of the IP address. |
| INT vlanTrunkUntagSubnetPortMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.4 | INTEGER | read-write | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| VLA vlanTrunkUntagSubnetPortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.5 | VlanIndex | read-write | NNI S-tag VLAN ID |
| INT vlanTrunkUntagSubnetPortNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.6 | INTEGER | read-write | NNI S-tag pbit |
| VLA vlanTrunkUntagSubnetPortNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.7 | VlanIndex | read-write | NNI C-tag VLAN ID. if vlanTrunkUntagSubnetPortMode is sVlan(1), the value will be ignored and always return 0. |
| INT vlanTrunkUntagSubnetPortNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.8 | INTEGER | read-write | NNI C-tag pbit. if vlanTrunkUntagSubnetPortMode is sVlan(1), the value will be ignored and always return 0. |
| ROW vlanTrunkUntagSubnetPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.4.1.9 | RowStatus | read-create | Row status of the table entry. |
| vlanTrunkUntagVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.5 | not-accessible | Cross-connects untagged packet in the specified UNI ATM virtual circuits to the specified S VLAN or S + C VLAN on NNI ports. | |
| vlanTrunkUntagVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1 | not-accessible | ||
| INT vlanTrunkUntagVcMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.1 | INTEGER | read-write | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| VLA vlanTrunkUntagVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.2 | VlanIndex | read-write | NNI S-tag VLAN ID |
| INT vlanTrunkUntagVcNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.3 | INTEGER | read-write | NNI S-tag pbit |
| VLA vlanTrunkUntagVcNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.4 | VlanIndex | read-write | NNI C-tag VLAN ID. if vlanTrunkUntagVcMode is sVlan(1), the value will be ignored and always return 0. |
| INT vlanTrunkUntagVcNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.5 | INTEGER | read-write | NNI C-tag pbit. if vlanTrunkUntagVcMode is sVlan(1), the value will be ignored and always return 0. |
| ROW vlanTrunkUntagVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.5.1.6 | RowStatus | read-create | Row status of the table entry. |
| vlanTrunkUntagEtypeVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.6 | not-accessible | Cross-connects untagged packet from the specified UNI ATM virtual circuits to the specified S VLAN or S + C VLAN on NNI ports per Etyer Type field in the packet. | |
| vlanTrunkUntagEtypeVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1 | not-accessible | ||
| U32 vlanTrunkUntagEtypeVcEtype | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.1 | Unsigned32 | read-only | Ether type |
| INT vlanTrunkUntagEtypeVcMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.2 | INTEGER | read-write | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| VLA vlanTrunkUntagEtypeVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.3 | VlanIndex | read-write | NNI S-tag VLAN ID |
| INT vlanTrunkUntagEtypeVcNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.4 | INTEGER | read-write | NNI S-tag pbit |
| VLA vlanTrunkUntagEtypeVcNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.5 | VlanIndex | read-write | NNI C-tag VLAN ID. if vlanTrunkUntagEtypeVcMode is sVlan(1), the value will be ignored and always return 0. |
| INT vlanTrunkUntagEtypeVcNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.6 | INTEGER | read-write | NNI C-tag pbit. if vlanTrunkUntagEtypeVcMode is sVlan(1), the value will be ignored and always return 0. |
| ROW vlanTrunkUntagEtypeVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.6.1.7 | RowStatus | read-create | Row status of the table entry. |
| vlanTrunkTagVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.7 | not-accessible | Cross-connects uni-vid tagged packet in the specified UNI ATM virtual circuits to the S(uni-vid) VLAN if svlan is not specified or S(svid) + C(uni-vid) on NNI ports if svlan is specified. | |
| vlanTrunkTagVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1 | not-accessible | ||
| VLA vlanTrunkTagVcUniNniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.1 | VlanIndex | read-only | UNI VLAN ID. This VLAN is also used as S VLAN ID or C VLAN ID depends on which NNI VLAN tagging mode is configured. |
| INT vlanTrunkTagVcMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.2 | INTEGER | read-write | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| VLA vlanTrunkTagVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.3 | VlanIndex | read-write | NNI S VLAN ID. This field is used when vlanTrunkTagPortMode is configured as sPlusCxVlan(2). |
| ROW vlanTrunkTagVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.7.1.4 | RowStatus | read-create | Row status of the table entry. |
| vlanTrunkUntagSubnetVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.6.8 | not-accessible | Cross-connects untagged packet from the specified UNI ATM virtual circuits to the specified S VLAN or S + C VLAN on NNI ports for specified IP subnet in the packet. | |
| vlanTrunkUntagSubnetVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1 | not-accessible | ||
| IPt vlanTrunkUntagSubnetVcIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.1 | InetAddressType | read-only | VLAN trunk subnet IP address type |
| IP vlanTrunkUntagSubnetVcIpAddress | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.2 | InetAddress | read-only | VLAN trunk subnet IP address 0.0.0.0 ~ 223.255.255.255 ::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff ipv4 address input format: # 0x00 0x00 0x00 0x00 ipv6 address input format: # 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Limit: vlanTrunkUntagSubnetVcIpAddressType must be set before vlanTrunkUntagSubnetVcIpAddress. |
| INT vlanTrunkUntagSubnetVcIpMask | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.3 | INTEGER | read-only | The netmask of the IP address. |
| INT vlanTrunkUntagSubnetVcMode | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.4 | INTEGER | read-write | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| VLA vlanTrunkUntagSubnetVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.5 | VlanIndex | read-write | NNI S-tag VLAN ID |
| INT vlanTrunkUntagSubnetVcNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.6 | INTEGER | read-write | NNI S-tag pbit |
| VLA vlanTrunkUntagSubnetVcNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.7 | VlanIndex | read-write | NNI C-tag VLAN ID. if vlanTrunkUntagSubnetVcMode is sVlan(1), the value will be ignored and always return 0. |
| INT vlanTrunkUntagSubnetVcNniCpbit | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.8 | INTEGER | read-write | NNI C-tag pbit. if vlanTrunkUntagSubnetVcMode is sVlan(1), the value will be ignored and always return 0. |
| ROW vlanTrunkUntagSubnetVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.6.8.1.9 | RowStatus | read-create | Row status of the table entry. |
| vlanTranslation | 1.3.6.1.4.1.890.1.5.13.13.11.7 | |||
| vlanTranslationPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.7.1 | not-accessible | Cross-connects uni-vid tagged packet in the specified UNI PTM ports to the S(svid) VLAN or S(svid) + C(cvid) on NNI ports. | |
| vlanTranslationPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1 | not-accessible | ||
| VLA vlanTranslationPortUniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.1 | VlanIndex | read-only | UNI VLAN ID |
| INT vlanTranslationPortMode | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.2 | INTEGER | read-write | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| VLA vlanTranslationPortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.3 | VlanIndex | read-write | NNI S VLAN ID |
| VLA vlanTranslationPortNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.4 | VlanIndex | read-write | NNI C VLAN ID |
| ROW vlanTranslationPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.5 | RowStatus | read-create | Row status of the table entry. |
| INT vlanTranslationPortNniSPrio | 1.3.6.1.4.1.890.1.5.13.13.11.7.1.1.6 | INTEGER | read-write | NNI priority 0~7. Specify 8 to not replace the priority. |
| vlanTranslationVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.7.2 | not-accessible | Cross-connects uni-vid tagged packet in the specified UNI ATM virtual circuits to the S(svid) VLAN or S(svid) + C(cvid) on NNI ports. | |
| vlanTranslationVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1 | not-accessible | ||
| VLA vlanTranslationVcUniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.1 | VlanIndex | read-only | UNI VLAN ID |
| INT vlanTranslationVcMode | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.2 | INTEGER | read-write | Configures NNI VLAN tagging mode. sVlan(1) - S tag only sPlusCxVlan(2) - S plus C tag |
| VLA vlanTranslationVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.3 | VlanIndex | read-write | NNI S VLAN ID |
| VLA vlanTranslationVcNniCvlan | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.4 | VlanIndex | read-write | NNI S VLAN ID. if vlanTranslationVcMode is sVlan(1), the value will be ignored and always return 0. |
| ROW vlanTranslationVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.5 | RowStatus | read-create | Row status of the table entry. |
| INT vlanTranslationVcNniSPrio | 1.3.6.1.4.1.890.1.5.13.13.11.7.2.1.6 | INTEGER | read-write | NNI priority 0~7. Specify 8 to not replace the priority. |
| vlanTls | 1.3.6.1.4.1.890.1.5.13.13.11.8 | |||
| vlanTlsPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.8.1 | not-accessible | Enables Transparent LAN service on the specified UNI PTM ports. The packets are tagged with S tag on NNI ports. | |
| vlanTlsPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1 | not-accessible | ||
| VLA vlanTlsPortNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.1 | VlanIndex | read-write | NNI S VLAN ID |
| INT vlanTlsPortNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.2 | INTEGER | read-write | NNI S PBIT. Used when vlanTlsPortNniForceSpbit is set to enable(1) |
| INT vlanTlsPortNniForceSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.3 | INTEGER | read-write | Force SPBIT per vlanTlsPortNniSpbit |
| ROW vlanTlsPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.8.1.1.4 | RowStatus | read-create | Row status of the table entry. |
| vlanTlsVcTable | 1.3.6.1.4.1.890.1.5.13.13.11.8.2 | not-accessible | Enables Transparent LAN service on the specified UNI ATM virtual circuits. The packets is tagged with S tag on NNI ports. | |
| vlanTlsVcEntry | 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1 | not-accessible | ||
| VLA vlanTlsVcNniSvlan | 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.1 | VlanIndex | read-write | NNI S VLAN ID |
| INT vlanTlsVcNniSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.2 | INTEGER | read-write | NNI S PBIT. Used when vlanTlsVcNniForceSpbit is set to enable(1) |
| INT vlanTlsVcNniForceSpbit | 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.3 | INTEGER | read-write | Force SPBIT per vlanTlsVcNniSpbit |
| ROW vlanTlsVcRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.8.2.1.4 | RowStatus | read-create | Row status of the table entry. |
| fdb | 1.3.6.1.4.1.890.1.5.13.13.11.9 | |||
| INT fdbAgingTime | 1.3.6.1.4.1.890.1.5.13.13.11.9.1 | INTEGER | read-write | Configures FDB aging time from 10 to 3600s. (OLC minimum aging-time is 30s) |
| fdbOps | 1.3.6.1.4.1.890.1.5.13.13.11.9.2 | |||
| POR fdbTarget | 1.3.6.1.4.1.890.1.5.13.13.11.9.2.1 | PortList | read-write | Specifies the target ifindex for fdbOperation |
| INT fdbOperation | 1.3.6.1.4.1.890.1.5.13.13.11.9.2.2 | INTEGER | read-write | Flush FDB flushFDBxAddressTable(1) - flush all entries in FDB table flushFDBAddressTableForSpecifiedPorts(1) - flush entries on specified port in FDB table |
| fdbPortConfTable | 1.3.6.1.4.1.890.1.5.13.13.11.9.3 | not-accessible | ||
| fdbPortConfEntry | 1.3.6.1.4.1.890.1.5.13.13.11.9.3.1 | not-accessible | ||
| INT fdbPortConfMaxNumOfMacEntries | 1.3.6.1.4.1.890.1.5.13.13.11.9.3.1.1 | INTEGER | read-write | Configures FDB maximum MAC entry counts for speicifed UNI ports |
| fdbPortUniVlanConfTable | 1.3.6.1.4.1.890.1.5.13.13.11.9.5 | not-accessible | ||
| fdbPortUniVlanConfEntry | 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1 | not-accessible | ||
| VLA fdbPortVlanConfUniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1.1 | VlanIndex | read-only | speicifed UNI VLAN |
| INT fdbPortVlanConfMaxNumOfMacEntries | 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1.2 | INTEGER | read-create | Configures FDB maximum MAC entry counts for speicifed UNI ports and UNI VLAN |
| ROW fdbPortVlanConfRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.9.5.1.3 | RowStatus | read-create | Row status of the table entry. |
| fdbStaticMacTable | 1.3.6.1.4.1.890.1.5.13.13.11.9.6 | not-accessible | Configures static MAC entry on specified UNI ports. | |
| fdbStaticMacEntry | 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1 | not-accessible | ||
| VLA fdbStaticMacVlanId | 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1.1 | VlanIndex | read-only | vlan id:1 ~ 4094, determined by VLAN model VLAN model | ---------------------------------- Trunk uni-vlan | uni-vid Trunk uni-untag | svlan Trunk etype(S) | svlan Trunk etype(S+C) | cvlan Translation | uni-vid Transparent | no support TLS | no support |
| PHY fdbStaticMacPhysAddress | 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1.2 | PhysAddress | read-only | MAC address |
| ROW fdbStaticMacRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.9.6.1.3 | RowStatus | read-create | Row status of the table entry. |
| fdbMacLearningVlanTable | 1.3.6.1.4.1.890.1.5.13.13.11.9.7 | not-accessible | MAC learning entry sorted by VLAN ID. | |
| fdbMacLearningVlanEntry | 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1 | not-accessible | ||
| PHY fdbMacLearningVlanPhysAddress | 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.4 | PhysAddress | read-only | MAC address |
| INT fdbMacLearningVlanPort | 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.6 | INTEGER | read-only | ifIndex the MAC is learnt on |
| INT fdbMacLearningVlanType | 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.7 | INTEGER | read-only | MAC learning type |
| VLA fdbMacLearningVlanVlanId | 1.3.6.1.4.1.890.1.5.13.13.11.9.7.1.8 | VlanIndex | read-only | S VLAN ID 0 ~ 4094. |
| fdbAntiSpoofingTable | 1.3.6.1.4.1.890.1.5.13.13.11.9.8 | not-accessible | A table that contains anti MAC spoofing configuration per interface. | |
| fdbAntiSpoofingEntry | 1.3.6.1.4.1.890.1.5.13.13.11.9.8.1 | not-accessible | An entry of fdbAntiSpoofingTable. | |
| INT fdbAntiSpoofing | 1.3.6.1.4.1.890.1.5.13.13.11.9.8.1.1 | INTEGER | read-write | Enable/Disable fdb anti-spoofing. enable: the anti-spoofing mac will be learned on the first port which receives the packet with it as source mac. When anti-spoofing is detected, anti-spoofing alarm will be issued. disable: the anti-spoofing mac will be learned on the latest port which receives the packet with it as source mac. When anti-spoofing is detected, anti-spoofing alarm will be issued. |
| INT fdbSpoofingAction | 1.3.6.1.4.1.890.1.5.13.13.11.9.8.1.2 | INTEGER | read-write | Enable/Disable spoofing action function. enable: disable port when anti-spoofing is detected. disable: do nothing when anti-spoofing is detected. |
| etherMtuTable | 1.3.6.1.4.1.890.1.5.13.13.11.11 | not-accessible | A table that contains Ethernet Frame Size configuration per interface. | |
| etherMtuEntry | 1.3.6.1.4.1.890.1.5.13.13.11.11.1 | not-accessible | An entry of etherMtuTable. | |
| INT mtuSize | 1.3.6.1.4.1.890.1.5.13.13.11.11.1.1 | INTEGER | read-write | Configures maximum frame size in unit of bytes |
| smcast | 1.3.6.1.4.1.890.1.5.13.13.11.12 | |||
| smcastMacTable | 1.3.6.1.4.1.890.1.5.13.13.11.12.1 | not-accessible | Configures static Multicast MAC on Uni port. | |
| smcastMacEntry | 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1 | not-accessible | A table entry for static Multicast MAC table. | |
| PHY smcastMacAddress | 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1.1 | PhysAddress | read-create | Static multicast group mac address, can be any multicast MAC except the following: 01:80:c2:00:00:00~01:80:c2:00:00:3f, 01:00:5e:00:00:00~01:00:5e:ff:ff:ff. |
| VLA smcastMacVlan | 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1.2 | VlanIndex | read-create | Specifies NNI VLAN ID |
| ROW smcastMacRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.12.1.1.3 | RowStatus | read-create | Row status of the table entry. |
| smcastMacNniTable | 1.3.6.1.4.1.890.1.5.13.13.11.12.2 | not-accessible | Configures static Multicast MAC for MSC card. | |
| smcastMacNniEntry | 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1 | not-accessible | A table entry for static Multicast MAC table for MSC card. | |
| PHY smcastMacNniAddress | 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1.1 | PhysAddress | read-create | Static multicast group mac address, can be any multicast MAC except the following: 01:80:c2:00:00:00~01:80:c2:00:00:ff, 01:00:5e:00:00:00~01:00:5e:7f:ff:ff. |
| VLA smcastMacNniVlan | 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1.2 | VlanIndex | read-create | Specifies NNI VLAN ID |
| ROW smcastMacNniRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.12.2.1.3 | RowStatus | read-create | Row status of the table entry. |
| smcastIpTable | 1.3.6.1.4.1.890.1.5.13.13.11.12.3 | not-accessible | Configures static Multicast IP for MSC card. | |
| smcastIpEntry | 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1 | not-accessible | A table entry for static Multicast IP table for MSC card. | |
| IP smcastIpAddress | 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.1 | IpAddress | read-create | Static multicast group IP address. (224.0.0.0 ~ 239.255.255.255) |
| VLA smcastIpVlan | 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.2 | VlanIndex | read-create | NNI VLAN ID (1~4094) |
| INT smcastIpRole | 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.3 | INTEGER | read-write | forbid: block multicast traffic and IGMP, fix: allow multicast traffic and drop IGMP |
| ROW smcastIpRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.12.3.1.4 | RowStatus | read-create | Row status of the table entry. |
| mirror | 1.3.6.1.4.1.890.1.5.13.13.11.13 | |||
| INT mirrorEnable | 1.3.6.1.4.1.890.1.5.13.13.11.13.1 | INTEGER | read-write | set to 'enable' to enable mirroring |
| INT mirrorMonitorPort | 1.3.6.1.4.1.890.1.5.13.13.11.13.2 | INTEGER | read-write | monitor port |
| mirrorPortTable | 1.3.6.1.4.1.890.1.5.13.13.11.13.3 | not-accessible | This table is supported by R5.06 and later versions. | |
| mirrorPortEntry | 1.3.6.1.4.1.890.1.5.13.13.11.13.3.1 | not-accessible | An entry in mirrorPortTable. | |
| INT mirrorPortDirection | 1.3.6.1.4.1.890.1.5.13.13.11.13.3.1.1 | INTEGER | read-write | Set to 'ingress' to mirror ingress traffic, 'egress' to mirror egress traffic, 'both' to mirror bi-directional traffic, 'none' to disable mirroring in this port |
| INT mirrorPortVlan | 1.3.6.1.4.1.890.1.5.13.13.11.13.3.1.2 | INTEGER | read-write | Specific the vlan which want to monitored. If the vlan value is 9999 denotes monitor all data traffic from specific port. If the vlan value is 0 denotes monitor untag data traffic from specific vdsl port. |
| vlanIsolation | 1.3.6.1.4.1.890.1.5.13.13.11.14 | |||
| vlanIsolationTable | 1.3.6.1.4.1.890.1.5.13.13.11.14.1 | not-accessible | A table contains configuration of isolated VLAN. | |
| vlanIsolationEntry | 1.3.6.1.4.1.890.1.5.13.13.11.14.1.1 | not-accessible | An entry of vlanIsolationTable. | |
| ROW vlanIsolationRowStatus | 1.3.6.1.4.1.890.1.5.13.13.11.14.1.1.1 | RowStatus | read-create | Row status of the table used to create/delete an entry. |
| pppoe | 1.3.6.1.4.1.890.1.5.13.13.12 | |||
| pppoeAgentTable | 1.3.6.1.4.1.890.1.5.13.13.12.1 | not-accessible | A table that contains PPPoE intermediate agent configuration. | |
| pppoeAgentEntry | 1.3.6.1.4.1.890.1.5.13.13.12.1.1 | not-accessible | An entry of pppoeAgentTable. | |
| VLA pppoeAgentVlanId | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.1 | VlanIndex | read-only | Specify the VLAN ID for the pppoeAgent configuration |
| INT pppoeAgentMode | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.2 | INTEGER | read-create | pppoeIA(1) - PPPoE intermediate agent function is enabled |
| STR pppoeAgentCircuitIDInfo | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.4 | DisplayString | read-create | User specific PPPoE circuit ID info. Note: When transform info to circuit ID, the transform result will be truncated to 63 characters Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>,./ %%: equals character % %0x00~%0xFF: represents byte value %pname: configured port name %ptel: configured port telephone No. %pid: port index %chvpi: channel vpi %chvci: channel vci %chid : in non DSL ATM channel, this field represents UNI VLAN ID, in DSL ATM channel, this field represents %chvpi.%chvci %slotid: slot index of the logic port %svlan: SVLAN ID which PPPoE client runs on %cvlan: CVLAN ID which PPPoE client runs on %hname: host device name %cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F %cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F %cmac3: MAC address of client, represents as Byte %dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F %dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F %dmac3: MAC address of host device, represents as Byte %phtype: represents as atm in ATM or represents as eth in Ethernet %hmodel: model name of host device %fwid: host device firmware ID %blank: blank character %ont: ont ID %ontc: ont card ID %uniport: uniport ID %sn: ont serial number |
| STR pppoeAgentRemoteIDInfo | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.6 | DisplayString | read-create | User specific PPPoE remote ID info. Note: When transform info to remote ID, the transform result will be truncated to 63 characters Info is composed by the following components special characters except % => ~`!@#$^&*()-=_+{}<>,./ %%: equals character % %0x00~%0xFF: represents byte value %pname: configured port name %ptel: configured port telephone No. %pid: port index %chvpi: channel vpi %chvci: channel vci %chid : in non DSL ATM channel, this field represents UNI VLAN ID, in DSL ATM channel, this field represents %chvpi.%chvci %slotid: slot index of the logic port %svlan: SVLAN ID which PPPoE client runs on %cvlan: CVLAN ID which PPPoE client runs on %hname: host device name %cmac1: MAC address of client, represents as XX:XX:XX:XX:XX:XX where X=0~F %cmac2: MAC address of client, represents as XXXXXXXXXXXX where X=0~F %cmac3: MAC address of client, represents as Byte %dmac1: MAC address of host device, represents as XX:XX:XX:XX:XX:XX where X=0~F %dmac2: MAC address of host device, represents as XXXXXXXXXXXX where X=0~F %dmac3: MAC address of host device, represents as Byte %phtype: represents as atm in ATM or represents as eth in Ethernet %hmodel: model name of host device %fwid: host device firmware ID %blank: blank character %ont: ont ID %ontc: ont card ID %uniport: uniport ID %sn: ont serial number |
| INT pppoeAgentOptPolicyVlan | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.7 | INTEGER | read-create | Select PPPoE option policy in specified VLAN. |
| ROW pppoeAgentRowStatus | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.8 | RowStatus | read-create | Row status of the table entry. |
| INT pppoeAgentOptLinechar | 1.3.6.1.4.1.890.1.5.13.13.12.1.1.9 | INTEGER | read-create | Select PPPoE option linechar in specified VLAN. |
| pppoeStatisticTable | 1.3.6.1.4.1.890.1.5.13.13.12.2 | not-accessible | ||
| pppoeStatisticEntry | 1.3.6.1.4.1.890.1.5.13.13.12.2.1 | not-accessible | ||
| C32 pppoeStatisticRxPADi | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.1 | Counter32 | read-only | counter for PADi |
| C32 pppoeStatisticRxPADo | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.2 | Counter32 | read-only | counter for PADo |
| C32 pppoeStatisticRxPADr | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.3 | Counter32 | read-only | counter for PADr |
| C32 pppoeStatisticRxPADs | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.4 | Counter32 | read-only | counter for PADs |
| C32 pppoeStatisticRxPADt | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.5 | Counter32 | read-only | counter for PADt |
| C32 pppoeStatisticRxErrSvcName | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.6 | Counter32 | read-only | counter for service name error |
| C32 pppoeStatisticRxErrAcSys | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.7 | Counter32 | read-only | counter for AC system error |
| C32 pppoeStatisticRxErrGeneric | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.8 | Counter32 | read-only | counter for generic error |
| C32 pppoeStatisticTxPADi | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.9 | Counter32 | read-only | counter for PADi |
| C32 pppoeStatisticTxPADo | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.10 | Counter32 | read-only | counter for PADo |
| C32 pppoeStatisticTxPADr | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.11 | Counter32 | read-only | counter for PADr |
| C32 pppoeStatisticTxPADs | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.12 | Counter32 | read-only | counter for PADs |
| C32 pppoeStatisticTxPADt | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.13 | Counter32 | read-only | counter for PADt |
| C32 pppoeStatisticTxErrGeneric | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.14 | Counter32 | read-only | counter for generic error |
| INT pppoeStatisticOperation | 1.3.6.1.4.1.890.1.5.13.13.12.2.1.15 | INTEGER | read-write | Clears pppoe statistic on specific port. |
| pppoeAgentPortTable | 1.3.6.1.4.1.890.1.5.13.13.12.3 | not-accessible | A table that contains PPPoE agent configuration for specified linecard ports. | |
| pppoeAgentPortEntry | 1.3.6.1.4.1.890.1.5.13.13.12.3.1 | not-accessible | Configures PPPoE agent for specified linecard ports. | |
| INT pppoeAgentOptPolicyPort | 1.3.6.1.4.1.890.1.5.13.13.12.3.1.1 | INTEGER | read-write | Select PPPoE option policy on specified linecard ports. |
| INT pppoeAgentOptPolicyMode | 1.3.6.1.4.1.890.1.5.13.13.12.4 | INTEGER | read-write | Select PPPoE option policy mode. |
| qos | 1.3.6.1.4.1.890.1.5.13.13.13 | |||
| INT qosAtmVcShapingEnable | 1.3.6.1.4.1.890.1.5.13.13.13.1 | INTEGER | read-write | Enable/Disable per-VC shaping for ATM VC. |
| INT qosMaxNumOfShapingProfiles | 1.3.6.1.4.1.890.1.5.13.13.13.2 | INTEGER | read-only | The maximum number of shaping profiles supported by the system. |
| qosShapingProfileTable | 1.3.6.1.4.1.890.1.5.13.13.13.3 | not-accessible | Configures shaping profiles. | |
| qosShapingProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.13.3.1 | not-accessible | ||
| STR qosShapingProfileName | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.1 | DisplayString | read-only | Profile name |
| INT qosShapingProfileQueue7Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.2 | INTEGER | read-create | The guarenteed minumun bandwidth of queue 7. |
| INT qosShapingProfileQueue6Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.3 | INTEGER | read-create | The guarenteed minumun bandwidth of queue 6. |
| INT qosShapingProfileQueue5Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.4 | INTEGER | read-create | The guarenteed minumun bandwidth of queue 5. |
| INT qosShapingProfileQueue4Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.5 | INTEGER | read-create | The guarenteed minumun bandwidth of queue 4. |
| INT qosShapingProfileQueue3Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.6 | INTEGER | read-create | The guarenteed minumun bandwidth of queue 3. |
| INT qosShapingProfileQueue2Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.7 | INTEGER | read-create | The guarenteed minumun bandwidth of queue 2. |
| INT qosShapingProfileQueue1Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.8 | INTEGER | read-create | The guarenteed minumun bandwidth of queue 1. |
| INT qosShapingProfileQueue0Rate | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.9 | INTEGER | read-create | The guarenteed minumun bandwidth of queue 0. |
| ROW qosShapingProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.13.3.1.18 | RowStatus | read-create | Row status of the table entry. |
| INT qosMaxNumOfVcShapingProfiles | 1.3.6.1.4.1.890.1.5.13.13.13.6 | INTEGER | read-only | The maximum number of VC shaping profiles supported by the system. |
| qosVcShapingProfileTable | 1.3.6.1.4.1.890.1.5.13.13.13.7 | not-accessible | Configures ATM shaping profiles. | |
| qosVcShapingProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.13.7.1 | not-accessible | ||
| STR qosVcShapingProfileName | 1.3.6.1.4.1.890.1.5.13.13.13.7.1.1 | DisplayString | read-only | Profile name |
| INT qosVcShapingProfileMaxRate | 1.3.6.1.4.1.890.1.5.13.13.13.7.1.2 | INTEGER | read-create | The max rate of VC shaping profile. |
| INT qosVcShapingProfileQueueDepth | 1.3.6.1.4.1.890.1.5.13.13.13.7.1.3 | INTEGER | read-create | The queue depth of VC shaping profile. |
| ROW qosVcShapingProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.13.7.1.4 | RowStatus | read-create | Row status of the table entry. |
| qosPortConfTable | 1.3.6.1.4.1.890.1.5.13.13.13.8 | not-accessible | Configures referenced QoS algorithm and QoS profile to UNI ports | |
| qosPortConfEntry | 1.3.6.1.4.1.890.1.5.13.13.13.8.1 | not-accessible | ||
| STR qosPortConfShapingProfile | 1.3.6.1.4.1.890.1.5.13.13.13.8.1.1 | DisplayString | read-write | Configures shaping profile on specified UNI port. |
| INT qosPortConfAlgorithm | 1.3.6.1.4.1.890.1.5.13.13.13.8.1.3 | INTEGER | read-write | Configures QoS algorithm on specified UNI port. |
| STR qosPortConfWeightProfile | 1.3.6.1.4.1.890.1.5.13.13.13.8.1.5 | DisplayString | read-write | Configures wrr/wfq profile on specified UNI port. |
| STR qosPortConfRateLimitProfile | 1.3.6.1.4.1.890.1.5.13.13.13.8.1.6 | DisplayString | read-write | Configures Rate limit profile on specified UNI port. |
| INT qosPortConfHybridspq | 1.3.6.1.4.1.890.1.5.13.13.13.8.1.9 | INTEGER | read-write | Configures Hybrid-Spq on specified UNI port. |
| qosVcConfTable | 1.3.6.1.4.1.890.1.5.13.13.13.9 | not-accessible | ||
| qosVcConfEntry | 1.3.6.1.4.1.890.1.5.13.13.13.9.1 | not-accessible | ||
| STR qosVcConfShapingProfile | 1.3.6.1.4.1.890.1.5.13.13.13.9.1.1 | DisplayString | read-write | Configures ATM shaping profile on specified ATM VC. |
| queueMapping | 1.3.6.1.4.1.890.1.5.13.13.13.10 | |||
| INT queueMappingPbit7QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.1 | INTEGER | read-write | Configures pbit 7 mapping to specified queue ID. |
| INT queueMappingPbit6QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.2 | INTEGER | read-write | Configures pbit 6 mapping to specified queue ID. |
| INT queueMappingPbit5QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.3 | INTEGER | read-write | Configures pbit 5 mapping to specified queue ID. |
| INT queueMappingPbit4QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.4 | INTEGER | read-write | Configures pbit 4 mapping to specified queue ID. |
| INT queueMappingPbit3QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.5 | INTEGER | read-write | Configures pbit 3 mapping to specified queue ID. |
| INT queueMappingPbit2QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.6 | INTEGER | read-write | Configures pbit 2 mapping to specified queue ID. |
| INT queueMappingPbit1QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.7 | INTEGER | read-write | Configures pbit 1 mapping to specified queue ID. |
| INT queueMappingPbit0QueueId | 1.3.6.1.4.1.890.1.5.13.13.13.10.8 | INTEGER | read-write | Configures pbit 0 mapping to specified queue ID. |
| dscp | 1.3.6.1.4.1.890.1.5.13.13.13.11 | |||
| dscpMappingTable | 1.3.6.1.4.1.890.1.5.13.13.13.11.1 | not-accessible | The table contains DSCP mapping configuration. | |
| dscpMappingEntry | 1.3.6.1.4.1.890.1.5.13.13.13.11.1.1 | not-accessible | An entry of dscpMappingTable. | |
| INT dscpSrcCodePoint | 1.3.6.1.4.1.890.1.5.13.13.13.11.1.1.1 | INTEGER | read-only | The DSCP source code point used for mapping. |
| INT dscpMapPriority | 1.3.6.1.4.1.890.1.5.13.13.13.11.1.1.2 | INTEGER | read-write | The mapping p bits that will replace the source p bits in the incoming packet. |
| dscpPortTable | 1.3.6.1.4.1.890.1.5.13.13.13.11.2 | not-accessible | The table contains DSCP mapping configuration for the xDSL and ethernet ports. | |
| dscpPortEntry | 1.3.6.1.4.1.890.1.5.13.13.13.11.2.1 | not-accessible | An entry of dscpPortTable. | |
| INT dscpStatusEnable | 1.3.6.1.4.1.890.1.5.13.13.13.11.2.1.1 | INTEGER | read-write | The DSCP port status. |
| INT qosMaxNumOfWeightProfiles | 1.3.6.1.4.1.890.1.5.13.13.13.12 | INTEGER | read-only | The maximum number of WRR/WFQ profiles supported by the system. |
| qosWeightProfileTable | 1.3.6.1.4.1.890.1.5.13.13.13.13 | not-accessible | Configures wrr/wfq profiles. | |
| qosWeightProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.13.13.1 | not-accessible | ||
| STR qosWeightProfileName | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.1 | DisplayString | read-only | Name of WRR/WFG profile. This is a table index. |
| INT qosWeightProfileQueue7Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.2 | INTEGER | read-create | The weight setting of queue 7, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| INT qosWeightProfileQueue6Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.3 | INTEGER | read-create | The weight setting of queue 6, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| INT qosWeightProfileQueue5Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.4 | INTEGER | read-create | The weight setting of queue 5, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| INT qosWeightProfileQueue4Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.5 | INTEGER | read-create | The weight setting of queue 4, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| INT qosWeightProfileQueue3Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.6 | INTEGER | read-create | The weight setting of queue 3, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| INT qosWeightProfileQueue2Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.7 | INTEGER | read-create | The weight setting of queue 2, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| INT qosWeightProfileQueue1Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.8 | INTEGER | read-create | The weight setting of queue 1, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| INT qosWeightProfileQueue0Weight | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.9 | INTEGER | read-create | The weight setting of queue 0, use 0 to specify SP mode. For VLC, 0 is equal to 1 because VLC not support SP+Weight algorithm. |
| ROW qosWeightProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.13.13.1.18 | RowStatus | read-create | Row status of the table entry. |
| INT qosMaxNumOfRateLimitProfiles | 1.3.6.1.4.1.890.1.5.13.13.13.14 | INTEGER | read-only | The maximum number of ratelimit profiles supported by the system. |
| qosRatelimitProfileTable | 1.3.6.1.4.1.890.1.5.13.13.13.15 | not-accessible | Configures rate limit profiles. | |
| qosRatelimitProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.13.15.1 | not-accessible | ||
| STR qosRatelimitProfileName | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.1 | DisplayString | read-only | Name of ratelimit profile. This is a table index. |
| INT qosRatelimitProfileIngressCIR | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.2 | INTEGER | read-create | Ingress CIR threshold of this rate limit profile. Unit is Kbps(minimum scale is 64 Kbps. If value is not a multiple of 64, a nearly value is applied.) |
| INT qosRatelimitProfileIngressCBS | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.3 | INTEGER | read-create | Ingress CBS threshold of this rate limit profile. Unit is Kbits(minimum scale is 64 Kbits. If value is not a multiple of 64, a nearly value is applied.) |
| INT qosRatelimitProfileIngressEIR | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.4 | INTEGER | read-create | Ingress EIR threshold of this rate limit profile. Unit is Kbps(minimum scale is 64 Kbps. If value is not a multiple of 64, a nearly value is applied.) |
| INT qosRatelimitProfileIngressEBS | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.5 | INTEGER | read-create | Ingress EBS threshold of this rate limit profile. Unit is Kbits(minimum scale is 64 Kbits. If value is not a multiple of 64, a nearly value is applied.) |
| INT qosRatelimitProfileIngressActive | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.7 | INTEGER | read-create | Enable/disable ingress rate limit. |
| INT qosRatelimitProfileEgressRate | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.8 | INTEGER | read-create | Egress Rate of this rate limit profile. Unit is Kbps(minimum scale is 64 Kbps. If value is not a multiple of 64, a nearly value is applied.) |
| INT qosRatelimitProfileEgressBurst | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.9 | INTEGER | read-create | Egress Burst of this rate limit profile. Unit is Kbits(minimum scale is 32 Kbits. If value is not a multiple of 32, a nearly value is applied.) |
| INT qosRatelimitProfileEgressActive | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.10 | INTEGER | read-create | Enable/disable egress rate limit. |
| ROW qosRatelimitProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.13.15.1.11 | RowStatus | read-create | Row status of the table entry. |
| service | 1.3.6.1.4.1.890.1.5.13.13.14 | |||
| accessCtrlTable | 1.3.6.1.4.1.890.1.5.13.13.14.1 | not-accessible | A table that contains information about service access control. | |
| accessCtrlEntry | 1.3.6.1.4.1.890.1.5.13.13.14.1.1 | not-accessible | A list of access control entry. | |
| INT accessCtrlService | 1.3.6.1.4.1.890.1.5.13.13.14.1.1.1 | INTEGER | read-only | The service type of the access control entry. |
| INT accessCtrlEnable | 1.3.6.1.4.1.890.1.5.13.13.14.1.1.2 | INTEGER | read-write | Enable/disable the service. |
| INT accessCtrlPort | 1.3.6.1.4.1.890.1.5.13.13.14.1.1.3 | INTEGER | read-write | The port number which the service uses. |
| securedClientIpTable | 1.3.6.1.4.1.890.1.5.13.13.14.2 | not-accessible | A table that contains information about IPv4 secured clients. | |
| securedClientIpEntry | 1.3.6.1.4.1.890.1.5.13.13.14.2.1 | not-accessible | A list of secured client entry. | |
| INT securedClientIpIndex | 1.3.6.1.4.1.890.1.5.13.13.14.2.1.1 | INTEGER | read-only | The index of the entry. |
| IP securedClientIpStartIpAddress | 1.3.6.1.4.1.890.1.5.13.13.14.2.1.2 | IpAddress | read-write | The start IP address (0.0.0.0 ~ 223.255.255.255) of the secured client settings. |
| IP securedClientIpEndIpAddress | 1.3.6.1.4.1.890.1.5.13.13.14.2.1.3 | IpAddress | read-write | The end IP address (0.0.0.0 ~ 223.255.255.255) of the secured client settings. |
| BIT securedClientIpService | 1.3.6.1.4.1.890.1.5.13.13.14.2.1.4 | Bits | read-write | Each bit corresponds to a service. The bit is settings to 1 if the service is enabled, and settings to 0 if the service is disabled. The various bit positions are: BIT 0: icmp BIT 1: telnet BIT 2: ftp BIT 3: snmp BIT 4: web BIT 5: https BIT 6: ssh |
| INT securedClientIpEnable | 1.3.6.1.4.1.890.1.5.13.13.14.2.1.5 | INTEGER | read-write | Enable/disable the entry. |
| securedClientIpv6Table | 1.3.6.1.4.1.890.1.5.13.13.14.3 | not-accessible | A table that contains information about IPv6 secured clients. | |
| securedClientIpv6Entry | 1.3.6.1.4.1.890.1.5.13.13.14.3.1 | not-accessible | A list of IPv6 secured client entry. | |
| INT securedClientIpv6Index | 1.3.6.1.4.1.890.1.5.13.13.14.3.1.1 | INTEGER | read-only | The index of the entry. |
| IP securedClientIpv6IpAddress | 1.3.6.1.4.1.890.1.5.13.13.14.3.1.2 | InetAddress | read-write | The IP address (:: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff) of the IPv6 secured client settings. |
| INT securedClientIpv6IpMask | 1.3.6.1.4.1.890.1.5.13.13.14.3.1.3 | INTEGER | read-write | The Mask of the IPv6 secured client settings. |
| BIT securedClientIpv6Service | 1.3.6.1.4.1.890.1.5.13.13.14.3.1.4 | Bits | read-write | Each bit corresponds to a service. The bit is settings to 1 if the service is enabled, and settings to 0 if the service is disabled. The various bit positions are: BIT 0: icmp BIT 1: telnet BIT 2: ftp BIT 3: snmp BIT 4: web BIT 5: https BIT 6: ssh |
| INT securedClientIpv6Enable | 1.3.6.1.4.1.890.1.5.13.13.14.3.1.5 | INTEGER | read-write | Enable/disable the entry. |
| snmp | 1.3.6.1.4.1.890.1.5.13.13.15 | |||
| snmpTrapDestTable | 1.3.6.1.4.1.890.1.5.13.13.15.1 | not-accessible | Sets the IP addresses of up to four SNMP managers (stations to send your SNMP traps to). You can configure up to four managers. | |
| snmpTrapDestEntry | 1.3.6.1.4.1.890.1.5.13.13.15.1.1 | not-accessible | ||
| INT snmpTrapDestIndex | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.1 | INTEGER | read-only | index (1..4) of the trap destination table |
| IPt snmpTrapDestIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.2 | InetAddressType | read-write | SNMP trap destination IP address type |
| IP snmpTrapDestIpAddress | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.3 | InetAddress | read-write | SNMP trap destination IP address 0.0.0.0 ~ 223.255.255.255 ::0 ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff ipv4 address input format: # 0x00 0x00 0x00 0x00 ipv6 address input format: # 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 Limit: snmpTrapDestIpAddressType must be set before snmpTrapDestIpAddress. |
| INT snmpTrapDestUdpPort | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.4 | INTEGER | read-write | SNMP manager UDP port. |
| INT snmpTrapDestVersion | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.5 | INTEGER | read-write | SNMP version. |
| STR snmpTrapDestUserName | 1.3.6.1.4.1.890.1.5.13.13.15.1.1.6 | DisplayString | read-write | Must match an existing account on the Switch. |
| STR snmpGetCommunity | 1.3.6.1.4.1.890.1.5.13.13.15.2 | DisplayString | read-write | Sets the get community. Only for SNMPv2c or lower. |
| STR snmpSetCommunity | 1.3.6.1.4.1.890.1.5.13.13.15.3 | DisplayString | read-write | Sets the set community. Only for SNMPv2c or lower. |
| STR snmpTrapCommunity | 1.3.6.1.4.1.890.1.5.13.13.15.4 | DisplayString | read-write | Sets the trap community. Only for SNMPv2c or lower. |
| snmpUserTable | 1.3.6.1.4.1.890.1.5.13.13.15.5 | not-accessible | Sets the authentication level for SNMP v3 user authentication. Optionally, specifies the authentication and encryption methods for communication with the SNMP manager. | |
| snmpUserEntry | 1.3.6.1.4.1.890.1.5.13.13.15.5.1 | not-accessible | SNMP user table entry | |
| STR snmpUserName | 1.3.6.1.4.1.890.1.5.13.13.15.5.1.1 | DisplayString | read-only | User name |
| INT snmpUserSecurityLevel | 1.3.6.1.4.1.890.1.5.13.13.15.5.1.2 | INTEGER | read-write | noauth: Use the username as the password string sent to the SNMP manager. This is equivalent to the Get, Set and Trap Community in SNMP v2c. This is the lowest security level. auth: Implement an authentication algorithm for SNMP messages sent by this user. priv: Implement authentication and encryption for SNMP messages sent by this user. This is the highest security level. |
| INT snmpUserAuthProtocol | 1.3.6.1.4.1.890.1.5.13.13.15.5.1.3 | INTEGER | read-write | Specify MD5 or SHA authentication algorithm. |
| INT snmpUserPrivProtocol | 1.3.6.1.4.1.890.1.5.13.13.15.5.1.4 | INTEGER | read-write | Specify DES or AES encryption algorithm. |
| INT snmpVersion | 1.3.6.1.4.1.890.1.5.13.13.15.6 | INTEGER | read-write | Sets the SNMP version to use for communication with the SNMP manager. |
| sys | 1.3.6.1.4.1.890.1.5.13.13.16 | |||
| STR sysBootupFwVersion | 1.3.6.1.4.1.890.1.5.13.13.16.1 | DisplayString | read-only | Display the version of the running firmware. |
| STR sysImage1FwVersion | 1.3.6.1.4.1.890.1.5.13.13.16.2 | DisplayString | read-only | Display the firmware version of image1 which was installed at first partition of the flash memory. |
| STR sysImage2FwVersion | 1.3.6.1.4.1.890.1.5.13.13.16.3 | DisplayString | read-only | Display the firmware version of image2 which was installed at second partition of the flash memory. |
| INT sysBootupImage | 1.3.6.1.4.1.890.1.5.13.13.16.4 | INTEGER | read-write | Current firmware image which was used for system boot up. |
| INT sysBootupConfig | 1.3.6.1.4.1.890.1.5.13.13.16.5 | INTEGER | read-write | Current configuration file the system booted up. |
| sysOps | 1.3.6.1.4.1.890.1.5.13.13.16.6 | |||
| POR sysTarget | 1.3.6.1.4.1.890.1.5.13.13.16.6.1 | PortList | read-write | Specifies target interface ifIndex for sysOperation. 0 - represent the system, others: same as ifIndex definition 10000: represent slot 1 system 20000: represent slot 2 system 40000: represent slot 4 system 50000: represent slot 5 system 60000: represent slot 6 system |
| INT sysOperation | 1.3.6.1.4.1.890.1.5.13.13.16.6.2 | INTEGER | read-write | The agent will reset the object's value to zero when the operation is done. resetByIntf(1) - applicable to ifIndex. saveConfigToBootConfig(2), saveConfigToConfig1(3), saveConfigToConfig2(4), loadFactoryDefault(5) - resets all config excluding management related settings. loadFactoryDefaultByIntf(6) - applicable to ifIndex. rebootSystem(7) - reboot the target system, unable to reboot target system when firmware upgrade is not ready. loadFactoryDefaultAll(8) - resets all config. |
| STR sysRebootCountdownTime | 1.3.6.1.4.1.890.1.5.13.13.16.6.3 | DisplayString | read-write | system reboot with specified time, the value 0 is set to cancel the operation, unable to set when line card firmware upgrade is not ready |
| sysTimeSetup | 1.3.6.1.4.1.890.1.5.13.13.16.7 | |||
| INT sysTimeServerMode | 1.3.6.1.4.1.890.1.5.13.13.16.7.1 | INTEGER | read-write | The mechanism of Time Server when the system boots up. |
| IPt sysTimeServerIPType | 1.3.6.1.4.1.890.1.5.13.13.16.7.2 | InetAddressType | read-write | The IP Address type |
| IP sysTimeServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.7.3 | InetAddress | read-write | The IP Address of Time Server |
| STR sysTimeSystemTime | 1.3.6.1.4.1.890.1.5.13.13.16.7.4 | DisplayString | read-write | The system time in hh/mm/ss format hh: 0 ~ 23 mm: 0 ~ 59 ss: 0 ~ 59 |
| STR sysTimeSystemDate | 1.3.6.1.4.1.890.1.5.13.13.16.7.5 | DisplayString | read-write | The system date in mm/dd/yyyy format mm: 1 ~ 12 dd: 1 ~ 31 yyyy: 1970 ~ 2037 |
| INT sysTimeSystemTimeZone | 1.3.6.1.4.1.890.1.5.13.13.16.7.6 | INTEGER | read-write | The system time zone |
| INT sysTimeServerSynchronize | 1.3.6.1.4.1.890.1.5.13.13.16.7.7 | INTEGER | read-write | Synchronize current system time with time server |
| INT sysTimeDaylightSaveEnable | 1.3.6.1.4.1.890.1.5.13.13.16.7.8 | INTEGER | read-write | Enables/Disables daylight saving on the Switch. |
| INT sysTimeDaylightSaveStartDateWeek | 1.3.6.1.4.1.890.1.5.13.13.16.7.9 | INTEGER | read-write | Configures daylight saving start-date week. |
| INT sysTimeDaylightSaveStartDateDay | 1.3.6.1.4.1.890.1.5.13.13.16.7.10 | INTEGER | read-write | Configures daylight saving start-date day. |
| INT sysTimeDaylightSaveStartDateMonth | 1.3.6.1.4.1.890.1.5.13.13.16.7.11 | INTEGER | read-write | Configures daylight saving start-date month. |
| INT sysTimeDaylightSaveStartDateClock | 1.3.6.1.4.1.890.1.5.13.13.16.7.12 | INTEGER | read-write | Configures daylight saving start-date o'clock. |
| INT sysTimeDaylightSaveEndDateWeek | 1.3.6.1.4.1.890.1.5.13.13.16.7.13 | INTEGER | read-write | Configures daylight saving end-date week. |
| INT sysTimeDaylightSaveEndDateDay | 1.3.6.1.4.1.890.1.5.13.13.16.7.14 | INTEGER | read-write | Configures daylight saving end-date day. |
| INT sysTimeDaylightSaveEndDateMonth | 1.3.6.1.4.1.890.1.5.13.13.16.7.15 | INTEGER | read-write | Configures daylight saving end-date month. |
| INT sysTimeDaylightSaveEndDateClock | 1.3.6.1.4.1.890.1.5.13.13.16.7.16 | INTEGER | read-write | Configures daylight saving end-date o'clock. |
| INT sysTimeServerLastSynchronizeStatus | 1.3.6.1.4.1.890.1.5.13.13.16.7.17 | INTEGER | read-only | The status of the last synchronization with time server |
| STR sysTimeServerLastSynchronizeTime | 1.3.6.1.4.1.890.1.5.13.13.16.7.18 | DisplayString | read-only | Last time synchronization with time server |
| sysFwUpgrade | 1.3.6.1.4.1.890.1.5.13.13.16.10 | |||
| INT sysFwUpgradeStatus | 1.3.6.1.4.1.890.1.5.13.13.16.10.3 | INTEGER | read-only | Device returns swDownloading(1) - if the downloading process is on going. Device returns swDownloadedSuccessfully(2) - if the downloading process is successfully. Device returns swDownloadedTimeout(3) - if the downloading process is timeout. Device returns swImageFileError(4) - if the downloaded image file has error CRC. Device returns swInstalling(5) - if the downloaded image file is installing (EAN is restarting). Device returns swInstallingError(6) - if EAN failed to installing downloaded image file. Device returns swInstallSuccessfully(7) - if EAN installed downloaded image file successfully. Device returns swRestoreSuccessfully(8) - if EAN restored SW successfully. Device returns swRevertSuccessfully(9) - if EAN reverted to old SW successfully. Device returns idle(10) - if EAN didn't get any SW downloading command after system booted up. Device returns unKnownError(11) - if the installing process is terminated due to NE restart by unknown reason |
| sysProductData | 1.3.6.1.4.1.890.1.5.13.13.16.12 | |||
| STR sysProductName | 1.3.6.1.4.1.890.1.5.13.13.16.12.1 | DisplayString | read-only | The product name is 'IES5206' by default. |
| STR sysProductDescr | 1.3.6.1.4.1.890.1.5.13.13.16.12.2 | DisplayString | read-only | The brief description of the product. |
| STR sysProductNumber | 1.3.6.1.4.1.890.1.5.13.13.16.12.3 | DisplayString | read-only | The product number for IES5206 |
| STR sysProductRevision | 1.3.6.1.4.1.890.1.5.13.13.16.12.4 | DisplayString | read-only | The product number is for example 'R1A', 'R1B', 'R2A', etc. according to product development and assignment. |
| STR sysSerialNumber | 1.3.6.1.4.1.890.1.5.13.13.16.12.5 | DisplayString | read-only | The product number assigned during manufacturing process. Serial number is in the format , e.g. 'Axx0001234'. |
| STR sysManufacturingDate | 1.3.6.1.4.1.890.1.5.13.13.16.12.6 | DisplayString | read-only | The product maunfacturing date in format of ', e.g. '20120611'. - 2012~ .... - 01~12 - 01~31 |
| aaa | 1.3.6.1.4.1.890.1.5.13.13.16.15 | |||
| authen | 1.3.6.1.4.1.890.1.5.13.13.16.15.1 | |||
| INT loginMethod1 | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.1 | INTEGER | read-write | The first method of login authentication |
| INT loginMethod2 | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.2 | INTEGER | read-write | The second method of enable authentication. |
| INT loginMethod3 | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.3 | INTEGER | read-write | The third method of enable authentication. |
| INT enableMethod1 | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.4 | INTEGER | read-write | The first method of enable authentication. |
| INT enableMethod2 | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.5 | INTEGER | read-write | The second method of enable authentication. |
| ENA enableTryContinue | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.6 | EnabledStatus | read-write | Enable: The system will still try next enable method even the current one method return failed by authentication. Disable: The system will only try next enable method while timeout. |
| ENA loginTryContinue | 1.3.6.1.4.1.890.1.5.13.13.16.15.1.7 | EnabledStatus | read-write | Enable: The system will still try next login method even the current one method return failed by authentication. Disable: The system will only try next login method while timeout. |
| acct | 1.3.6.1.4.1.890.1.5.13.13.16.15.2 | |||
| INT systemMethod | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.1 | INTEGER | read-write | set the accounting method for system level recording |
| INT execMethod | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.2 | INTEGER | read-write | set the accounting method for exec level accounting. |
| INT execMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.3 | INTEGER | read-write | set the update mode for exec level accounting. start-stop: Send start, stop event to server during administrator log in and log out the shell, and periodically update the session status to server. stop-only: Send only stop event to server when the administrator ends the session. |
| INT commandsPrivilege | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.4 | INTEGER | read-write | set the command privilege level(1~14) for accounting command privilege 0 means disable |
| INT updatePeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.5 | INTEGER | read-write | set the update interval of accounting, 1~2147483647 minutes |
| INT commandsMethod | 1.3.6.1.4.1.890.1.5.13.13.16.15.2.6 | INTEGER | read-only | show the accounting method for commands level accounting. |
| author | 1.3.6.1.4.1.890.1.5.13.13.16.15.3 | |||
| authorPrivModeTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1 | not-accessible | This table is to configure the mode of authorization for each privilege | |
| authorPrivModeEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1.1 | not-accessible | An entry of authorPrivModeEntry. | |
| INT authorPrivilege | 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1.1.1 | INTEGER | read-write | Set the privilege level for authorization, every command will have its assigned privilege, authorization happens when user executes a command which privilege is specified here. Accepted value is 1~14 |
| INT authorMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.3.1.1.2 | INTEGER | read-write | Set the authorization mode when authorization occurred. none: no authorization local: commands will be authorized with default privilege tacacs+: authorization will be sent to remote tacacs+ server. tacacs+ then none: authorization will be granted if there is no response from tacacs+ server. tacacs+ then local: local authorization will take place if there is no reponse from tacacs+ server. |
| radius | 1.3.6.1.4.1.890.1.5.13.13.16.15.4 | |||
| radiusAuthen | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1 | |||
| INT radiusAuthenRedundantMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.1 | INTEGER | read-write | Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact with the second server. round robin: to alternate between the servers that it sends message to. |
| INT radiusAuthenTimeoutPeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.2 | INTEGER | read-write | Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds When two servers configured and mode is index-priority, the actual timeout will be half of the configuration value. |
| radiusAuthenServerTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3 | not-accessible | ||
| radiusAuthenServerEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1 | not-accessible | An entry of radiusAuthenServerTable. | |
| INT radiusAuthenServerIndex | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.1 | INTEGER | read-only | The index of the server. |
| IP radiusAuthenServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.2 | InetAddress | read-write | The IP address of specified radius server. |
| INT radiusAuthenServerPort | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.3 | INTEGER | read-write | The UDP port of specified radius server |
| STR radiusAuthenServerSecret | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.1.3.1.4 | DisplayString | read-write | A string key shared with the radius server |
| radiusAcct | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2 | |||
| INT radiusAcctRedundantMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.1 | INTEGER | read-write | Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact with the second server. round robin: to alternate between the servers that it sends message to. |
| INT radiusAcctTimeoutPeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.2 | INTEGER | read-write | Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds. When two servers configured and mode is index-priority, the actual timeout will be half of the configuration value. |
| radiusAcctServerTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3 | not-accessible | ||
| radiusAcctServerEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1 | not-accessible | An entry of radiusAcctServerTable. | |
| INT radiusAcctServerIndex | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.1 | INTEGER | read-only | The index of the server. |
| IP radiusAcctServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.2 | InetAddress | read-write | The IP address of specified radius server. |
| INT radiusAcctServerPort | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.3 | INTEGER | read-write | The UDP port of specified radius server |
| STR radiusAcctServerSecret | 1.3.6.1.4.1.890.1.5.13.13.16.15.4.2.3.1.4 | DisplayString | read-write | A string key shared with the radius server |
| tacacsplus | 1.3.6.1.4.1.890.1.5.13.13.16.15.5 | |||
| tacacsplusAuthen | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1 | |||
| INT tacacsplusAuthenRedundantMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.1 | INTEGER | read-write | Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact with the second server. round robin: to alternate between the servers that it sends message to. |
| INT tacacsplusAuthenTimeoutPeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.2 | INTEGER | read-write | Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds. When two servers configured and mode is index-priority, the actual timeout will be half of the configuration value. |
| tacacsplusAuthenServerTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3 | not-accessible | ||
| tacacsplusAuthenServerEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1 | not-accessible | An entry of tacacsplusAuthServerTable. | |
| INT tacscsplusAuthenServerIndex | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.1 | INTEGER | read-only | The index of the server. |
| IP tacscsplusAuthenServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.2 | InetAddress | read-write | The IP address of specified tacacs+ server. |
| INT tacscsplusAuthenServerPort | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.3 | INTEGER | read-write | The TCP port of specified tacacs+ server |
| STR tacscsplusAuthenServerSecret | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.1.3.1.4 | DisplayString | read-write | A string key shared with the tacacs+ server |
| tacacsplusAcct | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2 | |||
| INT tacacsplusAcctRedundantMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.1 | INTEGER | read-write | Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact with the second server. round robin: to alternate between the servers that it sends message to. |
| INT tacacsplusAcctTimeoutPeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.2 | INTEGER | read-write | Set the timeout interval in seconds that the device waits for response from the server. 1~300 seconds. When two servers configured and mode is index-priority, the actual timeout will be half of the configuration value. |
| tacacsplusAcctServerTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3 | not-accessible | ||
| tacacsplusAcctServerEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1 | not-accessible | An entry of tacacsplusAcctServerTable. | |
| INT tacacsplusAcctServerIndex | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.1 | INTEGER | read-only | The index of the server. |
| IP tacacsplusAcctServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.2 | InetAddress | read-write | The IP address of specified tacacs+ server. |
| INT tacacsplusAcctServerPort | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.3 | INTEGER | read-write | The TCP port of specified tacacs+ server |
| STR tacacsplusAcctServerSecret | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.2.3.1.4 | DisplayString | read-write | A string key shared with the tacacs+ server |
| tacacsplusAuthor | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3 | |||
| INT tacacsplusAuthorRedundantMode | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.1 | INTEGER | read-write | Configure the strategy of server selection. index priority: the device tries to contact with the first server, if no response then the device tries to contact with the second server. round robin: to alternate between the servers that it sends message to. |
| INT tacacsplusAuthorTimeoutPeriod | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.2 | INTEGER | read-write | Timeout period (second) of command authorization via TACACS+. 1~300 seconds When two servers configured and mode is index-priority, the actual timeout will be half of the configuration value. |
| tacacsplusAuthorServerTable | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3 | not-accessible | This table is supported by R5.06 and later versions. | |
| tacacsplusAuthorServerEntry | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1 | not-accessible | An entry of tacacsplusAuthorServerEntry. This table is supported by R5.06 and later versions. | |
| INT tacacsplusAuthorServerIndex | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.1 | INTEGER | read-only | The index of the server. |
| IP tacacsplusAuthorServerIP | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.2 | InetAddress | read-write | TACACS+ server IP for command authorization. |
| INT tacacsplusAuthorServerPort | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.3 | INTEGER | read-write | TACACS+ server port for command authorization. |
| STR tacacsplusAuthorServerSecret | 1.3.6.1.4.1.890.1.5.13.13.16.15.5.3.3.1.4 | DisplayString | read-write | TACACS+ server secret key for command authorization. |
| systemStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16 | |||
| chassisStats | 1.3.6.1.4.1.890.1.5.13.13.16.16.1 | |||
| powerinfoTable | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1 | not-accessible | A table that display the status information for power module | |
| powerinfoEntry | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1 | not-accessible | The entry for powerinfoTable | |
| INT powerinfoIndex | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1.1 | INTEGER | not-accessible | The index for the power module |
| STR powerinfoMode | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1.2 | DisplayString | read-only | Display the AC/DC mode for the power module |
| STR powerinfoStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.1.1.3 | DisplayString | read-only | Display the status for the power module. up: the module is exist and voltage is well. down: the module is exist and voltage is fault. not exist: the module is not exist |
| faninfoTable | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2 | not-accessible | A table that display the status information for fan module | |
| faninfoEntry | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2.1 | not-accessible | The entry for faninfoTable | |
| INT fanModuleStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2.1.1 | INTEGER | read-only | The fan module exist or not |
| INT fanAlarmStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.2.1.2 | INTEGER | read-only | The alarm status of the fan module |
| acPowerCardInfo | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3 | |||
| INT acCardPowerSource | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.1 | INTEGER | read-only | The power source that provides power currently. |
| INT acCardSysPowerConsumption | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.2 | INTEGER | read-only | The system power consumption. Unit: mW |
| INT acCardBatChargingPower | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.3 | INTEGER | read-only | The power that is used by charging feature. Unit: mW |
| INT acCardBatStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.4 | INTEGER | read-only | The status of battery. |
| INT acCardBatTemperature | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.5 | INTEGER | read-only | The temperature of battery. Unit: Celsius *Note that this value will always be 0 when battery does not exist. |
| INT acCardBatRemainingPower | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.6 | INTEGER | read-only | The remaining power of battery. Unit: percentage (%) *Note that this value will always be 0 when battery does not exist. |
| INT acCardBatVoltage | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.7 | INTEGER | read-only | The voltage of battery. Unit: mV *Note that this value will always be 0 when battery does not exist. |
| INT acCardBatVoltageCondition | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.8 | INTEGER | read-only | The validation of battery information (status). *Note that this value will always be invalid(0) when battery does not exist. |
| INT acCardBatCapacityValidation | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.9 | INTEGER | read-only | The validation of battery information (capacity). *Note that this value will always be invalid(0) when battery does not exist. |
| INT acCardChargerStatus | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.10 | INTEGER | read-only | The status of charger. |
| INT acCardChargingCurrent | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.11 | INTEGER | read-only | The charging current of charger. Unit: mA *Note that this value will always be 0 when charger is off. |
| INT acCardChargingVoltageTarget | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.12 | INTEGER | read-only | The charging voltage of charger. Unit: mV *Note that this value will always be 0 when charger is off. |
| INT acCardChargingTime | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.13 | INTEGER | read-only | The time period since charger has been enabled. Unit: second *Note that this value will always be 0 when charger is off. |
| INT acCardTrickleCharge | 1.3.6.1.4.1.890.1.5.13.13.16.16.1.3.14 | INTEGER | read-only | The status of trickle charger. *Note that this value will always be '-' when charger is off. |
| sysMgmtOnlineUser | 1.3.6.1.4.1.890.1.5.13.13.16.17 | |||
| onlineUserTable | 1.3.6.1.4.1.890.1.5.13.13.16.17.1 | not-accessible | ||
| onlineUserEntry | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1 | not-accessible | An entry in onlineUserTable. | |
| INT onlineUserIndex | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.1 | INTEGER | read-only | |
| STR onlineUserSession | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.2 | DisplayString | read-only | user login service |
| STR onlineUserUser | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.3 | DisplayString | read-only | user name |
| IPt onlineUserAddrType | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.4 | InetAddressType | read-only | addr type |
| IP onlineUserAddr | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.5 | InetAddress | read-only | addr |
| STR onlineUserLoginTime | 1.3.6.1.4.1.890.1.5.13.13.16.17.1.1.6 | DisplayString | read-only | user login time |
| INT sysStdioDefault | 1.3.6.1.4.1.890.1.5.13.13.16.18 | INTEGER | read-write | stdio default setting. |
| acPowerCardSetting | 1.3.6.1.4.1.890.1.5.13.13.16.19 | |||
| INT acCardBatteryCapacity | 1.3.6.1.4.1.890.1.5.13.13.16.19.1 | INTEGER | read-write | Set battery capacity, user has to set this value to enable charger feature. When battery information is invalid, user needs to re-enter the batter capacity to continue charging procedure. |
| INT acCardBatteryTempThresholdHigh | 1.3.6.1.4.1.890.1.5.13.13.16.19.2 | INTEGER | read-write | Battery high temperature threshold. |
| INT acCardBatteryTempThresholdLow | 1.3.6.1.4.1.890.1.5.13.13.16.19.3 | INTEGER | read-write | Battery low temperature threshold. |
| INT sysReloadConfig | 1.3.6.1.4.1.890.1.5.13.13.16.20 | INTEGER | read-write | Reload the system with the specified configuration file. This operation may take a while, please set SNMP timeout to 30 or above. And pleasse note that if you reload a config and its IP is different to current IP, you may not get response. |
| vdsl | 1.3.6.1.4.1.890.1.5.13.13.17 | |||
| selt | 1.3.6.1.4.1.890.1.5.13.13.17.1 | |||
| INT seltTarget | 1.3.6.1.4.1.890.1.5.13.13.17.1.1 | INTEGER | read-write | IfIndex of the port which would be performed single end loopback test. |
| INT seltOps | 1.3.6.1.4.1.890.1.5.13.13.17.1.2 | INTEGER | read-write | The manager sets the object to 1 to start the selt and the agent clears the object to zero when selt is not in progress. |
| STR seltStatus | 1.3.6.1.4.1.890.1.5.13.13.17.1.3 | DisplayString | read-only | Status description of the selt result. |
| INT seltCableType | 1.3.6.1.4.1.890.1.5.13.13.17.1.4 | INTEGER | read-only | The cable type that selt result indicates. |
| INT seltLoopEstimateLengthFt | 1.3.6.1.4.1.890.1.5.13.13.17.1.5 | INTEGER | read-only | The estimated loop length that selt result indicates. |
| INT seltLoopEstimateLengthMeter | 1.3.6.1.4.1.890.1.5.13.13.17.1.6 | INTEGER | read-only | The estimated loop length that selt result indicates. |
| vdslOps | 1.3.6.1.4.1.890.1.5.13.13.17.2 | |||
| POR vdslTarget | 1.3.6.1.4.1.890.1.5.13.13.17.2.1 | PortList | read-write | The target interface specified by ifindex to clear packet statistics. This is allowed for interface 1..48, 101..148 for TIU V48 system. |
| INT vdslOperation | 1.3.6.1.4.1.890.1.5.13.13.17.2.2 | INTEGER | read-write | Clear packet statistics on the target ifindex specified by vdslTarget. The value will return to '0' when clear operation has done. |
| vdsl2Profile | 1.3.6.1.4.1.890.1.5.13.13.17.4 | |||
| vdsl2LineConfProfileExtendedTable | 1.3.6.1.4.1.890.1.5.13.13.17.4.1 | not-accessible | This table contains information on the VDSL2 line profile extension configuration. | |
| vdsl2LineConfProfileExtendedEntry | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1 | not-accessible | An entry extends the xdsl2LineConfProfEntry defined in RFC5650. | |
| INT vdsl2LineConfProfileDpboEPsdID | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.1 | INTEGER | read-write | standard psd shape id for psd toolbox |
| INT vdsl2LineConfProfileBitSwapDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.2 | INTEGER | read-write | Enable or disable downstream bit swap. |
| INT vdsl2LineConfProfileBitSwapUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.3 | INTEGER | read-write | Enable or disable upstream bit swap. |
| BIT vdsl2LineConfProfileVectoring | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.4 | Bits | read-write | A table containing the G.Vector information for each profile |
| INT vdsl2LineConfProfileRfiMode | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.5 | INTEGER | read-write | Configures Radio Frequency Intereference (RFI) mode. |
| INT vdsl2LineConfProfileDpboMode | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.6 | INTEGER | read-write | Configures DPBO mode for different procedure. |
| U32 vdsl2LineConfProfileDpboEselmin | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.7 | Unsigned32 | read-write | Configures DPBO E-side cable Electrical Length minimun.tcom mode only. Range from 0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of 0.5 dB. |
| INT vdsl2LineConfProfileCompatible | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.8 | INTEGER | read-write | Configures ADSL compatible mode. : none|adsl2|adsl2+ |
| OCT vdsl2LineConfProfileAdslCarrierMaskUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.9 | OCTET STRING | read-write | Configures ADSL upstream carrier mask |
| OCT vdsl2LineConfProfileAdslCarrierMaskDs0 | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.10 | OCTET STRING | read-write | Configures ADSL downstream carrier mask 0 |
| OCT vdsl2LineConfProfileAdslCarrierMaskDs1 | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.11 | OCTET STRING | read-write | Configures ADSL downstream carrier mask 1 |
| INT vdsl2LineConfProfilePMMode | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.12 | INTEGER | read-write | Configures Power Management mode. : disable|allow-l3|allow-l2|allow-both |
| U32 vdsl2LineConfProfilePMl0Time | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.13 | Unsigned32 | read-write | Defines the l0-time value. Range from 0 to 65535 sec. |
| U32 vdsl2LineConfProfilePMl2Time | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.14 | Unsigned32 | read-write | Defines the l2-time value. Range from 0 to 65535 sec. |
| U32 vdsl2LineConfProfilePMl2atpr | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.15 | Unsigned32 | read-write | Defines the l2-atpr value. Range from 0 to 15 dB. |
| U32 vdsl2LineConfProfilePMl2atprt | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.16 | Unsigned32 | read-write | Defines the l2-atprt value. Range from 0 to 15 dB. |
| INT vdsl2LineConfProfileSosCrcDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.19 | INTEGER | read-write | Configuration of downstream SOS CRC trigger condiftion 0 ~ 65535 in unit of 0.02 normalized CRC |
| INT vdsl2LineConfProfileSosCrcUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.20 | INTEGER | read-write | Configuration of upstream SOS CRC trigger condiftion 0 ~ 65535 in unit of 0.02 normalized CRC |
| INT vdsl2LineConfProfileSosMaxSuccessDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.21 | INTEGER | read-write | Configuration of downstream SOS max number of successful SOS procedures allowed in a 120 seconds interval before a full reinitialization is triggered 0 ~ 15, 0 is a special value indicating no limit on the maximum number of SOS recoveries within this time interval |
| INT vdsl2LineConfProfileSosMaxSuccessUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.22 | INTEGER | read-write | Configuration of upstream SOS max number of successful SOS procedures allowed in a 120 seconds interval before a full reinitialization is triggered 0 ~ 15, 0 is a special value indicating no limit on the maximum number of SOS recoveries within this time interval |
| INT vdsl2LineConfProfileSosMonTimeDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.23 | INTEGER | read-write | Configuration of downstream SOS monitoring time used to trigger and SOS operation 64 ~ 16320 in ms |
| INT vdsl2LineConfProfileSosMonTimeUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.24 | INTEGER | read-write | Configuration of upstream SOS monitoring time used to trigger and SOS operation 64 ~ 16320 in ms |
| INT vdsl2LineConfProfileSosNToneDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.25 | INTEGER | read-write | Configuration of downstream SOS tone degrade condition 0 ~ 100 in percent |
| INT vdsl2LineConfProfileSosNToneUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.26 | INTEGER | read-write | Configuration of upstream SOS tone degrade condition 0 ~ 100 in percent |
| INT vdsl2LineConfProfileRocEnableDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.27 | INTEGER | read-write | Configuration of upstream ROC Enable or disable downstream ROC |
| INT vdsl2LineConfProfileRocEnableUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.28 | INTEGER | read-write | Configuration of upstream ROC Enable or disable upstream ROC |
| INT vdsl2LineConfProfileRocMinInpDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.29 | INTEGER | read-write | Configuration of downstream minimum INP to be insured on the ROC channel 0 ~ 16 symbols in 0.5 symbol steps |
| INT vdsl2LineConfProfileRocMinInpUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.30 | INTEGER | read-write | Configuration of upstream minimum INP to be insured on the ROC channel 0 ~ 16 symbols in 0.5 symbol steps |
| INT vdsl2LineConfProfileRocSnrmDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.31 | INTEGER | read-write | Configuration of downstream SNRM for the ROC 0 ~ 310 in unit of 0.1 dB |
| INT vdsl2LineConfProfileRocSnrmUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.32 | INTEGER | read-write | Configuration of upstream SNRM for the ROC 0 ~ 310 in unit of 0.1 dB |
| STR vdsl2LineConfProfileRocDynamicdtg | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.33 | DisplayString | read-write | 00~3f in hex 01: enable SRA US Dynamic D. 02: enable SRA DS Dynamic D. 04: enable SRA US Dynamic T & G when ROC is disabled. 08: enable SRA DS Dynamic T & G when ROC is disabled. 10: enable SRA US Dynamic T & G when ROC is enabled. 20: enable SRA DS Dynamic T & G when ROC is enabled. |
| STR vdsl2LineConfProfileAdsl2CustomPsd | 1.3.6.1.4.1.890.1.5.13.13.17.4.1.1.36 | DisplayString | read-write | Configuration of ADSL2/2+ custom downstream PSD template. There should be at least one psd value less than or equal to 160 The set of breakpoints can then be represented as: [(ToneIndex1.PSD1)], [(ToneIndex2.PSD2)], ... , [(ToneIndexN.PSDN)]. example:[(00.01).(00.50)],[00.02.00.A0],... |
| vdsl2ChanConfProfileExTable | 1.3.6.1.4.1.890.1.5.13.13.17.4.3 | not-accessible | This table contains information on the VDSL2 channel profile extension configuration for G.inp. | |
| vdsl2ChanConfProfileExEntry | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1 | not-accessible | An entry in vdsl2ChanConfProfileExtendedEntry. | |
| XDS vdsl2ChanConfProfGinpRtxModeDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.4 | Xdsl2ConfigRtxMode | read-write | G.inp(G.998.4) support setting on downstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-end, it is enabled. Forced(2) - The line will only train if G998.4 can be enabled. Test(3) - G998.4 is enabled in test mode (refer to G998.4, Clause 10.4). |
| XDS vdsl2ChanConfProfGinpRtxModeUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.5 | Xdsl2ConfigRtxMode | read-write | G.inp(G.998.4) support setting on upstream direction. The possible values are: Forbidden(0) - Support for G998.4 is disabled. Preferred(1) - If G998.4 is supported by the far-end, it is enabled. Forced(2) - The line will only train if G998.4 can be enabled. Test(3) - G998.4 is enabled in test mode (refer to G998.4, Clause 10.4). |
| U32 vdsl2ChanConfProfGinpEtrMaxDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.6 | Unsigned32 | read-write | Defines the maximum allowed value for the ETR (Effective Throughput Rate). |
| U32 vdsl2ChanConfProfGinpEtrMaxUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.7 | Unsigned32 | read-write | Defines the maximum allowed value for the ETR (Effective Throughput Rate). |
| U32 vdsl2ChanConfProfGinpEtrMinDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.8 | Unsigned32 | read-write | Defines the minimum value for the ETR (Effective Throughput Rate). |
| U32 vdsl2ChanConfProfGinpEtrMinUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.9 | Unsigned32 | read-write | Defines the minimum value for the ETR (Effective Throughput Rate). |
| U32 vdsl2ChanConfProfGinpNdrMaxDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.10 | Unsigned32 | read-write | Overrules the wanted downstream maximum data rate provided in the SetLineTrafficConfiguration |
| U32 vdsl2ChanConfProfGinpNdrMaxUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.11 | Unsigned32 | read-write | Overrules the wanted upstream maximum data rate provided in the SetLineTrafficConfiguration |
| U32 vdsl2ChanConfProfGinpShineRatioDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.12 | Unsigned32 | read-write | The assumed downstream fraction range from 1 to 255 (in unit of 0.001) of NDR necessary to correct SHINE noise. |
| U32 vdsl2ChanConfProfGinpShineRatioUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.13 | Unsigned32 | read-write | The assumed upstream fraction range from 1 to 255 (in unit of 0.001) of NDR necessary to correct SHINE noise. |
| U32 vdsl2ChanConfProfGinpLeftrThresholdDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.14 | Unsigned32 | read-write | The downstream rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. |
| U32 vdsl2ChanConfProfGinpLeftrThresholdUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.15 | Unsigned32 | read-write | The upstream rate threshold (fraction of NDR) below which the Low Error Free Rate (LEFTR) defect is declared. |
| U32 vdsl2ChanConfProfGinpMaxDelayDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.16 | Unsigned32 | read-write | G.inp-specific value that overrules the traffic configuration setting in downstream direction. |
| U32 vdsl2ChanConfProfGinpMaxDelayUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.17 | Unsigned32 | read-write | G.inp-specific value that overrules the traffic configuration setting in upstream direction. |
| U32 vdsl2ChanConfProfGinpMinDelayDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.18 | Unsigned32 | read-write | G.inp-specific value that overrules minimum-delay-ds in channel profile setting. |
| U32 vdsl2ChanConfProfGinpMinDelayUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.19 | Unsigned32 | read-write | G.inp-specific value that overrules minimum-delay-us in channel profile setting. |
| U32 vdsl2ChanConfProfGinpInpMinDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.20 | Unsigned32 | read-write | G.inp-specific value that overrules INPmin-ds in channel profile setting. The possible values are: 0~63 in unit of 1 DMT symbol. Remark: current implementation is 0~31 |
| U32 vdsl2ChanConfProfGinpInpMinUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.21 | Unsigned32 | read-write | G.inp-specific value that overrules INPmin-ds in channel profile setting. Unit is symbol. The possible values are: 0~63 in unit of 1 DMT symbol. Remark: current implementation is 0~31 |
| U32 vdsl2ChanConfProfGinpReinCfgInpDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.22 | Unsigned32 | read-write | G.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0~7 in unit of 1 DMT symbol. |
| U32 vdsl2ChanConfProfGinpReinCfgInpUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.23 | Unsigned32 | read-write | G.inp-specific value that overrules the traffic configuration setting. Unit is symbol. The possible values are: 0~7 in unit of a DMT symbol. |
| U32 vdsl2ChanConfProfGinpReinCfgFreqDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.24 | Unsigned32 | read-write | G.inp-specific value that overrules the traffic configuration setting. The possible values is 100 or 120 in unit of Hz. 100 - 100Hz 120 - 120Hz |
| U32 vdsl2ChanConfProfGinpReinCfgFreqUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.25 | Unsigned32 | read-write | G.inp-specific value that overrules the traffic configuration setting. The possible value is 100 or 120 in unit of Hz. 100 - 100Hz 120 - 120Hz |
| INT vdsl2ChanConfProfTpstcAdsl | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.26 | INTEGER | read-write | Configures TPSTC type for ADSL. |
| U32 vdsl2ChanConfProfSosMinRateDs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.28 | Unsigned32 | read-write | Configure downstream SOS minimumrate 32 ~ 100032 in kbps |
| U32 vdsl2ChanConfProfSosMinRateUs | 1.3.6.1.4.1.890.1.5.13.13.17.4.3.1.29 | Unsigned32 | read-write | Configure upstream SOS minimumrate 32 ~ 100032 in kbps |
| vdsl2InmConfProfileTable | 1.3.6.1.4.1.890.1.5.13.13.17.4.4 | not-accessible | This table contains information on the VDSL2 Inm profile configuration. | |
| vdsl2InmConfProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1 | not-accessible | An entry in Vdsl2InmConfProfileEntry. | |
| STR vdsl2InmConfProfName | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.1 | DisplayString | read-only | Name of Inm profile. |
| INT vdsl2InmConfProfEimNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.2 | INTEGER | read-create | Configures near end equivalent INP mode. |
| INT vdsl2InmConfProfEimFe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.3 | INTEGER | read-create | Configures far end equivalent INP mode. |
| INT vdsl2InmConfProfCcpNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.4 | INTEGER | read-create | Configures near end cluster continuation parameter. |
| INT vdsl2InmConfProfCcpFe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.5 | INTEGER | read-create | Configures far end cluster continuation parameter. |
| INT vdsl2InmConfProfIatoNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.6 | INTEGER | read-create | Configures near end inter-arrival time offset. |
| INT vdsl2InmConfProfIatoFe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.7 | INTEGER | read-create | Configures far end inter-arrival time offset. |
| INT vdsl2InmConfProfIatsNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.8 | INTEGER | read-create | Configures near end inter-arrival time step. |
| INT vdsl2InmConfProfIatsFe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.9 | INTEGER | read-create | Configures far end inter-arrival time step. |
| INT vdsl2InmConfProfIsdbNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.10 | INTEGER | read-create | Configures near end ISDD sensitivity. |
| INT vdsl2InmConfProfEifNe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.12 | INTEGER | read-create | Configures near end equivalent INP format. |
| INT vdsl2InmConfProfEifFe | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.13 | INTEGER | read-create | Configures far end equivalent INP format. |
| ROW vdsl2InmConfProfRowStatus | 1.3.6.1.4.1.890.1.5.13.13.17.4.4.1.14 | RowStatus | read-create | |
| vdsl2TemplateConfProfileExTable | 1.3.6.1.4.1.890.1.5.13.13.17.4.5 | not-accessible | This table contains information on the VDSL2 template profile configuration. | |
| vdsl2TemplateConfProfileExEntry | 1.3.6.1.4.1.890.1.5.13.13.17.4.5.1 | not-accessible | An entry in vdsl2TemplateConfProfileExEntry. | |
| OCT vdsl2TemplateConfProfileInmProf | 1.3.6.1.4.1.890.1.5.13.13.17.4.5.1.1 | OCTET STRING | read-create | Inm profile for template proflie. |
| vdsl2Stats | 1.3.6.1.4.1.890.1.5.13.13.17.5 | |||
| xdsl2LineBandExtTable | 1.3.6.1.4.1.890.1.5.13.13.17.5.1 | not-accessible | This table show tx power of band. | |
| xdsl2LineBandExtEntry | 1.3.6.1.4.1.890.1.5.13.13.17.5.1.1 | not-accessible | An entry extends xdsl2LineBandEntry defined in RFC5650. | |
| INT xdsl2LineBandTxPower | 1.3.6.1.4.1.890.1.5.13.13.17.5.1.1.1 | INTEGER | read-only | Xdsl line band transmitted power (in unit of 0.1 dBm, -1280 indicates that power is empty) |
| xdsl2ChannelStatusExTable | 1.3.6.1.4.1.890.1.5.13.13.17.5.2 | not-accessible | The table displays VDSL2 channel Status. This table is supported by R5.06 and later versions. | |
| xdsl2ChannelStatusExEntry | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1 | not-accessible | An entry of vdslChanExtendedTable. | |
| XDS xdsl2ChannelActualRaMode | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.2 | Xdsl2StatusActualRaMode | read-only | The actual RA mode. The possible values are: fixedRateMode(1) - Fixed rate mode raInit(2) - Adaptive rate mode at initialization dynamicRa(3) - Dynamic rate adaptation sosEnabled(4) - SOS enabled |
| XDS xdsl2ChannelRtxMode | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.3 | Xdsl2StatusRtxMode | read-only | RTX_USED operational data parameter. The possible values are: rtxInUse(1) - RTX in use. rtxForbidden(2) - RTX not in use because RTX_MODE = FORBIDDEN. rtxNotSupportedXtuC(3) - RTX not in use because it is not supported by the XTU-C. rtxNotSupportedXtuR(4) - RTX not in use because it is not supported by the XTU-R. rtxNotSupportedBoth(5) - RTX not in use because it is not supported by the XTU-C and XTU-R. |
| U32 xdsl2ChannelRtxOverhead | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.4 | Unsigned32 | read-only | Expected retransmission overhead in G.inp due to REIN and SHINE noise. Unit is kbps. |
| U32 xdsl2ChannelGinpFramingType | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.5 | Unsigned32 | read-only | This parameter is equal to zero if G.inp is not enabled. If G.inp is enabled, it reports the framing type in use (1, 2, 3, or 4). |
| U32 xdsl2ChannelActualInpAgainstREIN | 1.3.6.1.4.1.890.1.5.13.13.17.5.2.1.6 | Unsigned32 | read-only | This parameter reports the actual INP against REIN noise in unit of 0.5 symbol. |
| xdsl2LineUsResultMaskTable | 1.3.6.1.4.1.890.1.5.13.13.17.5.3 | not-accessible | The table displays VDSL line actual PSD mask. This table is supported by R5.01 and later versions. | |
| xdsl2LineUsResultMaskEntry | 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1 | not-accessible | An entry of xdsl2LineUsResultMaskTable. | |
| INT xdsl2LineUsMaskId | 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1.1 | INTEGER | read-only | The id of the turning point of the mask, starting from 1. |
| INT xdsl2LineUsMaskTone | 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1.2 | INTEGER | read-only | The tone id. |
| INT xdsl2LineUsMaskPsd | 1.3.6.1.4.1.890.1.5.13.13.17.5.3.1.3 | INTEGER | read-only | The psd, in 0.1 dBm/Hz. |
| xdsl2LineDsResultMaskTable | 1.3.6.1.4.1.890.1.5.13.13.17.5.4 | not-accessible | The table displays VDSL line actual PSD mask. This table is supported by R5.01 and later versions. | |
| xdsl2LineDsResultMaskEntry | 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1 | not-accessible | An entry of xdsl2LineDsResultMaskTable. | |
| INT xdsl2LineDsMaskId | 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1.1 | INTEGER | read-only | The id of the turning point of the mask, starting from 1. |
| INT xdsl2LineDsMaskTone | 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1.2 | INTEGER | read-only | The tone id. |
| INT xdsl2LineDsMaskPsd | 1.3.6.1.4.1.890.1.5.13.13.17.5.4.1.3 | INTEGER | read-only | The psd, in 0.1 dBm/Hz. |
| xdsl2ExtPM | 1.3.6.1.4.1.890.1.5.13.13.17.6 | |||
| xdsl2ExtPMLineTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.1 | not-accessible | The table xdsl2ExtPMLineTable is a an extension of xdsl2PMLineCurrTable, which contains current Performance Monitoring results for DSL lines since system restarted. | |
| xdsl2ExtPMLineEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1 | not-accessible | an entry extends the xdsl2PMLinecurrEntry defined in RFC5650. One index of this table is an interface index where the interface has an ifType of vdsl2(251). A second index of this table is the termination unit. | |
| U32 xdsl2ExtPMLineFecs | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.1 | Unsigned32 | read-only | Count of seconds since system restarted that there was at least one FEC correction event for one or more bearer channels in this line. This parameter is inhibited during UAS or SES. |
| U32 xdsl2ExtPMLineEs | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.2 | Unsigned32 | read-only | Count of seconds since system restarted that there was: xTU-C: CRC-8 >= 1 for one or more bearer channels OR LOS >= 1 OR SEF >=1 OR LPR >= 1. xTU-R: FEBE >= 1 for one or more bearer channels OR LOS-FE >=1 OR RDI >=1 OR LPR-FE >=1 . This parameter is inhibited during UAS. |
| U32 xdsl2ExtPMLineSes | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.3 | Unsigned32 | read-only | Count of seconds since system restarts that there was: xTU-C: (CRC-8 anomalies in one or more of the received bearer channels) >= 18 OR LOS >= 1 OR SEF >= 1 OR LPR >= 1. xTU-R: (FEBE anomalies in one or more of the received bearer channels) >= 18 OR LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 . This parameter is inhibited during UAS. |
| U32 xdsl2ExtPMLineLoss | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.4 | Unsigned32 | read-only | Count of seconds since system restarted that there was LOS (or LOS-FE for xTU-R). |
| U32 xdsl2ExtPMLineUas | 1.3.6.1.4.1.890.1.5.13.13.17.6.1.1.5 | Unsigned32 | read-only | Count of seconds in Unavailability State since system restarted. Unavailability begins at the onset of 10 contiguous severely errored seconds, and ends at the onset of 10 contiguous seconds with no severely errored seconds. |
| xdsl2ExtPMLineInitTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.2 | not-accessible | The table xdsl2ExtPMLineInitTable contains PM line initialization history for DSL lines since system restarted. | |
| xdsl2ExtPMLineInitEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.2.1 | not-accessible | An entry extends xdsl2PMLineInitCurrEntry defined in RFC5650. | |
| U32 xdsl2ExtPMLInitFullInits | 1.3.6.1.4.1.890.1.5.13.13.17.6.2.1.1 | Unsigned32 | read-only | Count of full initializations attempted on the line (successful and failed) since system restarted. |
| U32 xdsl2ExtPMLInitFailedFullInits | 1.3.6.1.4.1.890.1.5.13.13.17.6.2.1.2 | Unsigned32 | read-only | Count of failed full initializations on the line since system restarted. |
| xdsl2ExtPMChTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.3 | not-accessible | The table contains Performance Monitoring results for DSL channels since system restarted. | |
| xdsl2ExtPMChEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1 | not-accessible | An entry extends xdsl2PMChCurrEntry defined in RFC5650 | |
| U32 xdsl2ExtPMChCodingViolations | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.1 | Unsigned32 | read-only | Count of CRC-8 (FEBE for xTU-R) anomalies occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the CRC is applied over multiple channels, then each related CRC-8 (or FEBE) anomaly SHOULD increment each of the counters related to the individual channels. |
| U32 xdsl2ExtPMChCorrectedBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.2 | Unsigned32 | read-only | Count of FEC (FFEC for xTU-R) anomalies (corrected code words) occurring in the channel during the interval. This parameter is inhibited during UAS or SES. If the FEC is applied over multiple channels, then each related FEC (or FFEC) anomaly SHOULD increment each of the counters related to the individual channels. |
| U32 xdsl2ExtPMChUncorrectBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.3 | Unsigned32 | read-only | Performance channel uncorrected blocks. |
| U32 xdsl2ExtPMChRtxCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.4 | Unsigned32 | read-only | Performance channel Rtx code word. |
| U32 xdsl2ExtPMChRtxCorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.5 | Unsigned32 | read-only | Performance channel Rtx corrected code word. |
| U32 xdsl2ExtPMChRtxUncorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.3.1.6 | Unsigned32 | read-only | Performance channel Rtx uncorrected code word. |
| xdsl2ExtPMLineCurrTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.4 | not-accessible | The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable. | |
| xdsl2ExtPMLineCurrEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1 | not-accessible | The table xdsl2ExtPMLineCurrTable extends xdsl2PMLineCurrTable. | |
| INT xdsl2PMLCurr15MLofs | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.1 | INTEGER | read-only | Count of seconds during this interval that there was LOF. |
| INT xdsl2PMLCurr15MLol | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.2 | INTEGER | read-only | Count of times during this interval that the line Loss of Link. |
| INT xdsl2PMLCurr15MLols | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.3 | INTEGER | read-only | Count of seconds during this interval that there was Loss of Link. |
| INT xdsl2PMLCurr15MLpr | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.4 | INTEGER | read-only | Count of times during this interval that the line Loss of Power. |
| INT xdsl2PMLCurr15MLprs | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.5 | INTEGER | read-only | Count of seconds during this interval that there was Loss of Power. |
| INT xdsl2PMLCurr1DayLofs | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.6 | INTEGER | read-only | Count of seconds during this interval that there was LOF. |
| INT xdsl2PMLCurr1DayLol | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.7 | INTEGER | read-only | Count of times during this interval that the line Loss of Link. |
| INT xdsl2PMLCurr1DayLols | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.8 | INTEGER | read-only | Count of seconds during this interval that there was Loss of Link. |
| INT xdsl2PMLCurr1DayLpr | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.9 | INTEGER | read-only | Count of times during this interval that the line Loss of Power. |
| INT xdsl2PMLCurr1DayLprs | 1.3.6.1.4.1.890.1.5.13.13.17.6.4.1.10 | INTEGER | read-only | Count of seconds during this interval that there was Loss of Power. |
| xdsl2ExtPMLineHist15MinTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.5 | not-accessible | The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable. | |
| xdsl2ExtPMLineHist15MinEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1 | not-accessible | The table xdsl2ExtPMLineHist15MinTable extends xdsl2PMLineHist15MinTable. | |
| C32 xdsl2PMLHist15MLofs | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.1 | Counter32 | read-only | Count of seconds during this interval that there was LOF. |
| C32 xdsl2PMLHist15MLol | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.2 | Counter32 | read-only | Count of times during this interval that the line Loss of Link. |
| C32 xdsl2PMLHist15MLols | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.3 | Counter32 | read-only | Count of seconds during this interval that the line Loss of Link. |
| C32 xdsl2PMLHist15MLpr | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.4 | Counter32 | read-only | Count of times during this interval that the line Loss of Power. |
| C32 xdsl2PMLHist15MLprs | 1.3.6.1.4.1.890.1.5.13.13.17.6.5.1.5 | Counter32 | read-only | Count of seconds during this interval that the line Loss of Power. |
| xdsl2ExtPMLineHist1DayTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.6 | not-accessible | The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable. | |
| xdsl2ExtPMLineHist1DayEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1 | not-accessible | The table xdsl2ExtPMLineHist1DayTable extends xdsl2PMLineHist1DayTable. | |
| C32 xdsl2PMLHist1DLofs | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.1 | Counter32 | read-only | Count of seconds during this interval that there was LOF. |
| C32 xdsl2PMLHist1DLol | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.2 | Counter32 | read-only | Count of times during this interval that the line Loss of Link. |
| C32 xdsl2PMLHist1DLols | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.3 | Counter32 | read-only | Count of seconds during this interval that the line Loss of Link. |
| C32 xdsl2PMLHist1DLpr | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.4 | Counter32 | read-only | Count of times during this interval that the line Loss of Power. |
| C32 xdsl2PMLHist1DLprs | 1.3.6.1.4.1.890.1.5.13.13.17.6.6.1.5 | Counter32 | read-only | Count of seconds during this interval that the line Loss of Power. |
| xdsl2ExtPMChCurrTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.7 | not-accessible | The table xdsl2ExtPMChCurrTable extends xdsl2PMChCurrTable. | |
| xdsl2ExtPMChCurrEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1 | not-accessible | The table xdsl2ExtPMChCurrTable extends xdsl2PMChCurrTable. | |
| U32 xdsl2PMChCurr15MUncorrectBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.1 | Unsigned32 | read-only | Performance channel uncorrected blocks. |
| U32 xdsl2PMChCurr15MRtxCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.2 | Unsigned32 | read-only | Performance channel Rtx code word. |
| U32 xdsl2PMChCurr15MRtxCorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.3 | Unsigned32 | read-only | Performance channel Rtx corrected code word. |
| U32 xdsl2PMChCurr15MRtxUnorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.4 | Unsigned32 | read-only | Performance channel Rtx uncorrected code word. |
| U32 xdsl2PMChCurr1DayUncorrectBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.5 | Unsigned32 | read-only | Performance channel uncorrected blocks. |
| U32 xdsl2PMChCurr1DayRtxCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.6 | Unsigned32 | read-only | Performance channel Rtx code word. |
| U32 xdsl2PMChCurr1DayRtxCorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.7 | Unsigned32 | read-only | Performance channel Rtx corrected code word. |
| U32 xdsl2PMChCurr1DayRtxUnorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.7.1.8 | Unsigned32 | read-only | Performance channel Rtx uncorrected code word. |
| xdsl2ExtPMChHist15MinTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.8 | not-accessible | The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable. | |
| xdsl2ExtPMChHist15MinEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1 | not-accessible | The table xdsl2ExtPMChHist15MinTable extends xdsl2PMChHist15MinTable. | |
| U32 xdsl2PMChHist15MUncorrectBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.1 | Unsigned32 | read-only | Performance channel uncorrected blocks. |
| U32 xdsl2PMChHist15MRtxCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.2 | Unsigned32 | read-only | Performance channel Rtx code word. |
| U32 xdsl2PMChHist15MRtxCorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.3 | Unsigned32 | read-only | Performance channel Rtx corrected code word. |
| U32 xdsl2PMChHist15MRtxUncorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.8.1.4 | Unsigned32 | read-only | Performance channel Rtx uncorrected code word. |
| xdsl2ExtPMChHist1DayTable | 1.3.6.1.4.1.890.1.5.13.13.17.6.9 | not-accessible | The table xdsl2ExtPMChHist1DayTable extends xdsl2PMChHist1DayTable. | |
| xdsl2ExtPMChHist1DayEntry | 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1 | not-accessible | The table xdsl2ExtPMChHist1DayTable extends xdsl2PMChHist1DayTable. | |
| U32 xdsl2PMChHist1DayUncorrectBlocks | 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.1 | Unsigned32 | read-only | Performance channel uncorrected blocks. |
| U32 xdsl2PMChHist1DayRtxCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.2 | Unsigned32 | read-only | Performance channel Rtx code word. |
| U32 xdsl2PMChHist1DayRtxCorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.3 | Unsigned32 | read-only | Performance channel Rtx corrected code word. |
| U32 xdsl2PMChHist1DayRtxUncorrectedCW | 1.3.6.1.4.1.890.1.5.13.13.17.6.9.1.4 | Unsigned32 | read-only | Performance channel Rtx uncorrected code word. |
| gvector | 1.3.6.1.4.1.890.1.5.13.13.17.7 | |||
| gvectorModeTable | 1.3.6.1.4.1.890.1.5.13.13.17.7.2 | not-accessible | A table containing the G.Vector information for each VDSL cards. | |
| gvectorModeEntry | 1.3.6.1.4.1.890.1.5.13.13.17.7.2.1 | not-accessible | An entry of gvectorModeTable. The index is slotModuleId. | |
| INT gvectorMode | 1.3.6.1.4.1.890.1.5.13.13.17.7.2.1.1 | INTEGER | read-write | Configure G.Vector mode for each VDSL cards. blv supports all types of chassis. slv is not supported on IES4204 only. dlv is supported on IES4204 only. |
| INT runningGvectorMode | 1.3.6.1.4.1.890.1.5.13.13.17.7.2.1.2 | INTEGER | read-only | Current running G.Vector mode of each VDSL cards. |
| ldm | 1.3.6.1.4.1.890.1.5.13.13.17.8 | |||
| INT ldmTarget | 1.3.6.1.4.1.890.1.5.13.13.17.8.1 | INTEGER | read-write | IfIndex of the port which would be performed ldm test. |
| INT ldmOps | 1.3.6.1.4.1.890.1.5.13.13.17.8.2 | INTEGER | read-write | The manager sets the object to 1 to start the ldm test and the agent clears the object to zero when ldm test is successfully completed. |
| STR ldmStatus | 1.3.6.1.4.1.890.1.5.13.13.17.8.3 | DisplayString | read-only | Status description of ldm test result. |
| OCT ldmAtucLoopAttenuation | 1.3.6.1.4.1.890.1.5.13.13.17.8.4 | OCTET STRING | read-only | Loop Attenuation. |
| OCT ldmAtucSignalAttenuation | 1.3.6.1.4.1.890.1.5.13.13.17.8.5 | OCTET STRING | read-only | Signal Attenuation. |
| OCT ldmAtucSignalMargin | 1.3.6.1.4.1.890.1.5.13.13.17.8.6 | OCTET STRING | read-only | Signal Margin. |
| INT ldmAtucAggregateTxPower | 1.3.6.1.4.1.890.1.5.13.13.17.8.7 | INTEGER | read-only | Actual Aggregate Transmit Power. |
| U32 ldmAtucAttainableBitRate | 1.3.6.1.4.1.890.1.5.13.13.17.8.8 | Unsigned32 | read-only | Attainable Bit Rate. |
| OCT ldmAturLoopAttenuation | 1.3.6.1.4.1.890.1.5.13.13.17.8.9 | OCTET STRING | read-only | Loop Attenuation. |
| OCT ldmAturSignalAttenuation | 1.3.6.1.4.1.890.1.5.13.13.17.8.10 | OCTET STRING | read-only | Signal Attenuation. |
| OCT ldmAturSignalMargin | 1.3.6.1.4.1.890.1.5.13.13.17.8.11 | OCTET STRING | read-only | Signal Margin. |
| INT ldmAturAggregateTxPower | 1.3.6.1.4.1.890.1.5.13.13.17.8.12 | INTEGER | read-only | Actual Aggregate Transmit Power. |
| U32 ldmAturAttainableBitRate | 1.3.6.1.4.1.890.1.5.13.13.17.8.13 | Unsigned32 | read-only | Attainable Bit Rate. |
| INT ldmAtucNumOfSubcarriersPerPort | 1.3.6.1.4.1.890.1.5.13.13.17.8.14 | INTEGER | read-only | The number of subcarriers per port for ATU-C. |
| INT ldmAturNumOfSubcarriersPerPort | 1.3.6.1.4.1.890.1.5.13.13.17.8.15 | INTEGER | read-only | The number of subcarriers per port for ATU-R. |
| INT ldmAtucHlinScale | 1.3.6.1.4.1.890.1.5.13.13.17.8.16 | INTEGER | read-only | Scale of Hlin. |
| OCT ldmAtucHlinReal1 | 1.3.6.1.4.1.890.1.5.13.13.17.8.17 | OCTET STRING | read-only | The object provides real part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmAtucHlinReal2 | 1.3.6.1.4.1.890.1.5.13.13.17.8.18 | OCTET STRING | read-only | The object provides real part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmAtucHlinImage1 | 1.3.6.1.4.1.890.1.5.13.13.17.8.19 | OCTET STRING | read-only | The object provides image part of Hlin for the first 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmAtucHlinImage2 | 1.3.6.1.4.1.890.1.5.13.13.17.8.20 | OCTET STRING | read-only | The object provides image part of Hlin for the last 256 subcarriers. Each subcarrier takes two octets to store the value. |
| OCT ldmAtucHlog1 | 1.3.6.1.4.1.890.1.5.13.13.17.8.21 | OCTET STRING | read-only | The object provides Hlog for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. |
| OCT ldmAtucHlog2 | 1.3.6.1.4.1.890.1.5.13.13.17.8.22 | OCTET STRING | read-only | The object provides Hlog for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. |
| OCT ldmAtucQln1 | 1.3.6.1.4.1.890.1.5.13.13.17.8.23 | OCTET STRING | read-only | The object provides QLN for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement could be done for the sub-carrier group. |
| OCT ldmAtucQln2 | 1.3.6.1.4.1.890.1.5.13.13.17.8.24 | OCTET STRING | read-only | The object provides QLN for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement could be done for the sub-carrier group. |
| OCT ldmAtucSnr1 | 1.3.6.1.4.1.890.1.5.13.13.17.8.25 | OCTET STRING | read-only | The object provides SNR for the first 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. |
| OCT ldmAtucSnr2 | 1.3.6.1.4.1.890.1.5.13.13.17.8.26 | OCTET STRING | read-only | The object provides SNR for the last 256 subcarriers. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. |
| INT ldmAturHlinScale | 1.3.6.1.4.1.890.1.5.13.13.17.8.27 | INTEGER | read-only | Scale of Hlin. |
| OCT ldmAturHlinReal | 1.3.6.1.4.1.890.1.5.13.13.17.8.28 | OCTET STRING | read-only | Real part of Hlin. Each subcarrier takes two octets to store the value. |
| OCT ldmAturHlinImage | 1.3.6.1.4.1.890.1.5.13.13.17.8.29 | OCTET STRING | read-only | Image part of Hlin. Each subcarrier takes two octets to store the value. |
| OCT ldmAturHlog | 1.3.6.1.4.1.890.1.5.13.13.17.8.30 | OCTET STRING | read-only | Hlog of subcarrier. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. |
| OCT ldmAturQln | 1.3.6.1.4.1.890.1.5.13.13.17.8.31 | OCTET STRING | read-only | QLN of subcarrier. Each subcarrier takes two octets to store the value. A special value 0 indicates that no measurement could be done for the sub-carrier group. |
| OCT ldmAturSnr | 1.3.6.1.4.1.890.1.5.13.13.17.8.32 | OCTET STRING | read-only | SNR of subcarrier. Each subcarrier takes two octets to store the value. A special value -32768 indicates that no measurement could be done for the sub-carrier group. |
| pintransform | 1.3.6.1.4.1.890.1.5.13.13.17.9 | |||
| pinTransFormModeTable | 1.3.6.1.4.1.890.1.5.13.13.17.9.1 | not-accessible | A table containing the PIN to port mapping for each VDSL cards. | |
| pinTransFormModeEntry | 1.3.6.1.4.1.890.1.5.13.13.17.9.1.1 | not-accessible | An entry of pinTransFormModeTable. The index is slotModuleId. | |
| INT pinTransFormMode | 1.3.6.1.4.1.890.1.5.13.13.17.9.1.1.1 | INTEGER | read-write | Configure PIN to port mapping for each VDSL cards. |
| seltCalibration | 1.3.6.1.4.1.890.1.5.13.13.17.10 | |||
| INT seltCalibrationTarget | 1.3.6.1.4.1.890.1.5.13.13.17.10.1 | INTEGER | read-write | IfIndex of the port which would be performed selt calibration test. |
| INT seltCalibrationOps | 1.3.6.1.4.1.890.1.5.13.13.17.10.2 | INTEGER | read-write | The manager sets the object to 1 to start the selt calibration and the agent clears the object to zero when selt is not in progress. |
| INT seltCalibrationFrontEndDelay | 1.3.6.1.4.1.890.1.5.13.13.17.10.3 | INTEGER | read-only | |
| INT seltCalibrationFrontEndGain | 1.3.6.1.4.1.890.1.5.13.13.17.10.4 | INTEGER | read-only | |
| INT seltCalibrationShortSeltDelay | 1.3.6.1.4.1.890.1.5.13.13.17.10.5 | INTEGER | read-only | |
| INT seltCalibrationGain1 | 1.3.6.1.4.1.890.1.5.13.13.17.10.6 | INTEGER | read-only | |
| INT seltCalibrationGain2 | 1.3.6.1.4.1.890.1.5.13.13.17.10.7 | INTEGER | read-only | |
| INT seltCalibrationL0 | 1.3.6.1.4.1.890.1.5.13.13.17.10.8 | INTEGER | read-only | |
| vdslInmCounter | 1.3.6.1.4.1.890.1.5.13.13.17.11 | |||
| vdslInmCountCurrent | 1.3.6.1.4.1.890.1.5.13.13.17.11.1 | not-accessible | Displays current DSL line status on specified UNI ports line Displays DSL detail line information on specified | |
| vdslInmCountCurrentEntry | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1 | not-accessible | an entry displays current DSL line status on specified UNI ports line Displays DSL detail line information on specified, when vdslInmCountUnit is 1 mean xtuc, 2 mean xtur | |
| U32 vdslInmCountCurEQINP1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.1 | Unsigned32 | read-only | EQINP1 |
| U32 vdslInmCountCurEQINP2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.2 | Unsigned32 | read-only | EQINP2 |
| U32 vdslInmCountCurEQINP3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.3 | Unsigned32 | read-only | EQINP3 |
| U32 vdslInmCountCurEQINP4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.4 | Unsigned32 | read-only | EQINP4 |
| U32 vdslInmCountCurEQINP5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.5 | Unsigned32 | read-only | EQINP5 |
| U32 vdslInmCountCurEQINP6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.6 | Unsigned32 | read-only | EQINP6 |
| U32 vdslInmCountCurEQINP7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.7 | Unsigned32 | read-only | EQINP7 |
| U32 vdslInmCountCurEQINP8 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.8 | Unsigned32 | read-only | EQINP8 |
| U32 vdslInmCountCurEQINP9 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.9 | Unsigned32 | read-only | EQINP9 |
| U32 vdslInmCountCurEQINP10 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.10 | Unsigned32 | read-only | EQINP10 |
| U32 vdslInmCountCurEQINP11 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.11 | Unsigned32 | read-only | EQINP11 |
| U32 vdslInmCountCurEQINP12 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.12 | Unsigned32 | read-only | EQINP12 |
| U32 vdslInmCountCurEQINP13 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.13 | Unsigned32 | read-only | EQINP13 |
| U32 vdslInmCountCurEQINP14 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.14 | Unsigned32 | read-only | EQINP14 |
| U32 vdslInmCountCurEQINP15 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.15 | Unsigned32 | read-only | EQINP15 |
| U32 vdslInmCountCurEQINP16 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.16 | Unsigned32 | read-only | EQINP16 |
| U32 vdslInmCountCurEQINP17 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.17 | Unsigned32 | read-only | EQINP17 |
| U32 vdslInmCountCurIAT0 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.18 | Unsigned32 | read-only | IAT0 |
| U32 vdslInmCountCurIAT1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.19 | Unsigned32 | read-only | IAT1 |
| U32 vdslInmCountCurIAT2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.20 | Unsigned32 | read-only | IAT2 |
| U32 vdslInmCountCurIAT3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.21 | Unsigned32 | read-only | IAT3 |
| U32 vdslInmCountCurIAT4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.22 | Unsigned32 | read-only | IAT4 |
| U32 vdslInmCountCurIAT5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.23 | Unsigned32 | read-only | IAT5 |
| U32 vdslInmCountCurIAT6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.24 | Unsigned32 | read-only | IAT6 |
| U32 vdslInmCountCurIAT7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.25 | Unsigned32 | read-only | IAT7 |
| U32 vdslInmCountCurSYMBOLS | 1.3.6.1.4.1.890.1.5.13.13.17.11.1.1.26 | Unsigned32 | read-only | SYMBOLS |
| vdslInmCount15min | 1.3.6.1.4.1.890.1.5.13.13.17.11.2 | not-accessible | Displays 15-min DSL line status on specified UNI ports line Displays DSL detail line information on specified | |
| vdslInmCount15minEntry | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1 | not-accessible | an entry displays 15-min DSL line status on specified UNI ports line Displays DSL detail line information on specified, when vdslInmCountUnit is 1 mean xtuc, 2 mean xtur, bucket 0 mean current 15 min | |
| U32 vdslInmCount15minEQINP1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.1 | Unsigned32 | read-only | EQINP1 |
| U32 vdslInmCount15minEQINP2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.2 | Unsigned32 | read-only | EQINP2 |
| U32 vdslInmCount15minEQINP3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.3 | Unsigned32 | read-only | EQINP3 |
| U32 vdslInmCount15minEQINP4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.4 | Unsigned32 | read-only | EQINP4 |
| U32 vdslInmCount15minEQINP5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.5 | Unsigned32 | read-only | EQINP5 |
| U32 vdslInmCount15minEQINP6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.6 | Unsigned32 | read-only | EQINP6 |
| U32 vdslInmCount15minEQINP7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.7 | Unsigned32 | read-only | EQINP7 |
| U32 vdslInmCount15minEQINP8 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.8 | Unsigned32 | read-only | EQINP8 |
| U32 vdslInmCount15minEQINP9 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.9 | Unsigned32 | read-only | EQINP9 |
| U32 vdslInmCount15minEQINP10 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.10 | Unsigned32 | read-only | EQINP10 |
| U32 vdslInmCount15minEQINP11 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.11 | Unsigned32 | read-only | EQINP11 |
| U32 vdslInmCount15minEQINP12 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.12 | Unsigned32 | read-only | EQINP12 |
| U32 vdslInmCount15minEQINP13 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.13 | Unsigned32 | read-only | EQINP13 |
| U32 vdslInmCount15minEQINP14 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.14 | Unsigned32 | read-only | EQINP14 |
| U32 vdslInmCount15minEQINP15 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.15 | Unsigned32 | read-only | EQINP15 |
| U32 vdslInmCount15minEQINP16 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.16 | Unsigned32 | read-only | EQINP16 |
| U32 vdslInmCount15minEQINP17 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.17 | Unsigned32 | read-only | EQINP17 |
| U32 vdslInmCount15minIAT0 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.18 | Unsigned32 | read-only | IAT0 |
| U32 vdslInmCount15minIAT1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.19 | Unsigned32 | read-only | IAT1 |
| U32 vdslInmCount15minIAT2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.20 | Unsigned32 | read-only | IAT2 |
| U32 vdslInmCount15minIAT3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.21 | Unsigned32 | read-only | IAT3 |
| U32 vdslInmCount15minIAT4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.22 | Unsigned32 | read-only | IAT4 |
| U32 vdslInmCount15minIAT5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.23 | Unsigned32 | read-only | IAT5 |
| U32 vdslInmCount15minIAT6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.24 | Unsigned32 | read-only | IAT6 |
| U32 vdslInmCount15minIAT7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.25 | Unsigned32 | read-only | IAT7 |
| U32 vdslInmCount15minSYMBOLS | 1.3.6.1.4.1.890.1.5.13.13.17.11.2.1.26 | Unsigned32 | read-only | SYMBOLS |
| vdslInmCount1day | 1.3.6.1.4.1.890.1.5.13.13.17.11.3 | not-accessible | Displays 1-day DSL line status on specified UNI ports line Displays DSL detail line information on specified | |
| vdslInmCount1dayEntry | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1 | not-accessible | an entry displays 1-day DSL line status on specified UNI ports line Displays DSL detail line information on specified, when vdslInmCountUnit is 1 mean xtuc, 2 mean xtur. bucket 0 mean current 1day | |
| U32 vdslInmCount1dayEQINP1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.1 | Unsigned32 | read-only | EQINP1 |
| U32 vdslInmCount1dayEQINP2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.2 | Unsigned32 | read-only | EQINP2 |
| U32 vdslInmCount1dayEQINP3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.3 | Unsigned32 | read-only | EQINP3 |
| U32 vdslInmCount1dayEQINP4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.4 | Unsigned32 | read-only | EQINP4 |
| U32 vdslInmCount1dayEQINP5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.5 | Unsigned32 | read-only | EQINP5 |
| U32 vdslInmCount1dayEQINP6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.6 | Unsigned32 | read-only | EQINP6 |
| U32 vdslInmCount1dayEQINP7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.7 | Unsigned32 | read-only | EQINP7 |
| U32 vdslInmCount1dayEQINP8 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.8 | Unsigned32 | read-only | EQINP8 |
| U32 vdslInmCount1dayEQINP9 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.9 | Unsigned32 | read-only | EQINP9 |
| U32 vdslInmCount1dayEQINP10 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.10 | Unsigned32 | read-only | EQINP10 |
| U32 vdslInmCount1dayEQINP11 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.11 | Unsigned32 | read-only | EQINP11 |
| U32 vdslInmCount1dayEQINP12 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.12 | Unsigned32 | read-only | EQINP12 |
| U32 vdslInmCount1dayEQINP13 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.13 | Unsigned32 | read-only | EQINP13 |
| U32 vdslInmCount1dayEQINP14 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.14 | Unsigned32 | read-only | EQINP14 |
| U32 vdslInmCount1dayEQINP15 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.15 | Unsigned32 | read-only | EQINP15 |
| U32 vdslInmCount1dayEQINP16 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.16 | Unsigned32 | read-only | EQINP16 |
| U32 vdslInmCount1dayEQINP17 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.17 | Unsigned32 | read-only | EQINP17 |
| U32 vdslInmCount1dayIAT0 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.18 | Unsigned32 | read-only | IAT0 |
| U32 vdslInmCount1dayIAT1 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.19 | Unsigned32 | read-only | IAT1 |
| U32 vdslInmCount1dayIAT2 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.20 | Unsigned32 | read-only | IAT2 |
| U32 vdslInmCount1dayIAT3 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.21 | Unsigned32 | read-only | IAT3 |
| U32 vdslInmCount1dayIAT4 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.22 | Unsigned32 | read-only | IAT4 |
| U32 vdslInmCount1dayIAT5 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.23 | Unsigned32 | read-only | IAT5 |
| U32 vdslInmCount1dayIAT6 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.24 | Unsigned32 | read-only | IAT6 |
| U32 vdslInmCount1dayIAT7 | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.25 | Unsigned32 | read-only | IAT7 |
| U32 vdslInmCount1daySYMBOLS | 1.3.6.1.4.1.890.1.5.13.13.17.11.3.1.26 | Unsigned32 | read-only | SYMBOLS |
| xturInfo | 1.3.6.1.4.1.890.1.5.13.13.17.12 | |||
| xturInfoTable | 1.3.6.1.4.1.890.1.5.13.13.17.12.1 | not-accessible | xtur info table | |
| xturInfoEntry | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1 | not-accessible | ||
| STR xturInfoHsCountryCode | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.1 | DisplayString | read-only | Displays XTUR HS country code on specific port. |
| STR xturInfoHsProviderCode | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.2 | DisplayString | read-only | Displays XTUR HS provider code on specific port. |
| STR xturInfoHsVendorInfo | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.3 | DisplayString | read-only | Displays XTUR HS vendor info on specific port. |
| STR xturInfoFeSysCountryCode | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.4 | DisplayString | read-only | Displays XTUR FE system country code on specific port. |
| STR xturInfoFeSysProviderCode | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.5 | DisplayString | read-only | Displays XTUR FE system provider code on specific port. |
| STR xturInfoFeSysVendorInfo | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.6 | DisplayString | read-only | Displays XTUR FE system vendor info on specific port. |
| STR xturInfoFeSysVersion | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.7 | DisplayString | read-only | Displays XTUR FE system version on specific port. |
| STR xturInfoFeSysSerial | 1.3.6.1.4.1.890.1.5.13.13.17.12.1.1.8 | DisplayString | read-only | Displays XTUR FE system serial number on specific port. |
| coa | 1.3.6.1.4.1.890.1.5.13.13.20 | |||
| U32 coaConfIssueThreshold | 1.3.6.1.4.1.890.1.5.13.13.20.1 | Unsigned32 | read-write | CPU overload alarm issue threshold. CPU overload alarm issue threshold should be higher than CPU overload alarm clear threshold. The default one will be 90% CPU load. |
| U32 coaConfClearThreshold | 1.3.6.1.4.1.890.1.5.13.13.20.2 | Unsigned32 | read-write | CPU overload alarm clear threshold. CPU overload alarm clear threshold should be lower than CPU overload alarm issue threshold. The default one will be 60% CPU load |
| U32 coaConfSampleSeconds | 1.3.6.1.4.1.890.1.5.13.13.20.3 | Unsigned32 | read-write | Sample seconds of cpu overload alarm. The default sample rate is 35 seconds |
| INT coaConfAnalyticMethod | 1.3.6.1.4.1.890.1.5.13.13.20.4 | INTEGER | read-write | Analytic method of cpu overload alarm. 'continous(1)' is the default value. |
| performance | 1.3.6.1.4.1.890.1.5.13.13.23 | |||
| ifXExt | 1.3.6.1.4.1.890.1.5.13.13.24 | |||
| ifXExtTable | 1.3.6.1.4.1.890.1.5.13.13.24.8 | not-accessible | A table extends IfXTable. | |
| ifXExtEntry | 1.3.6.1.4.1.890.1.5.13.13.24.8.1 | not-accessible | An entry to extend IfXEntry and ifIndex could be 1..24. | |
| C64 ifXExtHCInError | 1.3.6.1.4.1.890.1.5.13.13.24.8.1.1 | Counter64 | read-only | Count of error packet received on specified ifterface indexed by ifIndex. |
| C64 ifXExtHCInDrop | 1.3.6.1.4.1.890.1.5.13.13.24.8.1.2 | Counter64 | read-only | Count of received packet dropped by specified ifterface indexed by ifIndex. |
| C64 ifXExtHCOutError | 1.3.6.1.4.1.890.1.5.13.13.24.8.1.3 | Counter64 | read-only | Count of error packet transmitted on specified ifterface indexed by ifIndex. |
| C64 ifXExtHCOutDrop | 1.3.6.1.4.1.890.1.5.13.13.24.8.1.4 | Counter64 | read-only | Count of transmitted packet dropped on specified ifterface indexed by ifIndex. |
| gbondExt | 1.3.6.1.4.1.890.1.5.13.13.25 | |||
| gBondTemplate | 1.3.6.1.4.1.890.1.5.13.13.25.2 | |||
| gBondTemplateTable | 1.3.6.1.4.1.890.1.5.13.13.25.2.1 | not-accessible | Table of G.Bond template configuration derived from gBondPortConfTable | |
| gBondTemplateEntry | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1 | not-accessible | An entry of G.Bond template configuration derived from gBondPortConfEntry. | |
| STR gBondTemplateName | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.1 | SnmpAdminString | read-only | G.Bond template name. |
| U32 gBondTemplateThreshLowUpRate | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.7 | Unsigned32 | read-create | This object configures the G.Bond port low upstream rate crossing alarm threshold. When the current value of gBondPortStatUpDataRate for this port reaches/drops below or exceeds this threshold, a gBondLowUpRateCrossing notification MAY be generated if enabled by gBondTemplateLowRateCrossingEnable. This object is read-write for the -O subtype G.Bond ports. It is irrelevant for the -R subtypes - attempts to read or change this object for such ports MUST be rejected (in case of SNMP with the error inconsistentValue). This object maps to the TR-159 attribute aGroupthreshLowUpRate. |
| U32 gBondTemplateThreshLowDnRate | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.8 | Unsigned32 | read-create | This object configures the G.Bond port low downstream rate crossing alarm threshold. When the current value of gBondPortStatDnDataRate for this port reaches/drops below or exceeds this threshold, a gBondLowDnRateCrossing notification MAY be generated if enabled by gBondTemplateLowRateCrossingEnable. This object is read-write for the -O subtype G.Bond ports. It is irrelevant for the -R subtypes - attempts to read or change this object for such ports MUST be rejected (in case of SNMP with the error inconsistentValue). This object maps to the TR-159 attribute aGroupThreshDownUpRate. |
| T/F gBondTemplateLowRateCrossingEnable | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.9 | TruthValue | read-create | Indicates whether gBondLowUpRateCrossing and gBondLowDnRateCrossing notifications should be generated for this interface. Value of true(1) indicates that the notifications are enabled. Value of false(2) indicates that the notifications are disabled. This object is read-write for the -O subtype G.Bond ports. It is irrelevant for the -R subtypes - attempts to read or change this object for such ports MUST be rejected (in case of SNMP with the error inconsistentValue). This object maps to the TR-159 attribute aGroupLowRateCrossingEnable. |
| STR gBondTemplatePmTcaConfProfile | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.10 | SnmpAdminString | read-create | The value of this object is the index of the row in the GBS port Alarm Configuration Profile Table for Performance Monitoring Threshold Crossing Alerts - gBondPortAlarmConfProfileTable, which applies to this GBS port. |
| T/F gBondTemplatePmTcaEnable | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.11 | TruthValue | read-create | Indicates whether gBondPerfTca*Crossing set of notifications should be generated for this interface. Value of true(1) indicates that the notifications are enabled. Value of false(2) indicates that the notifications are disabled. This object maps to the TR-159 attribute aGroupPerfTcaEnable. |
| ROW gBondTemplateRowStatus | 1.3.6.1.4.1.890.1.5.13.13.25.2.1.1.12 | RowStatus | read-create | Row status of the table entry. |
| gBondTemplateOps | 1.3.6.1.4.1.890.1.5.13.13.25.2.3 | |||
| STR templateName | 1.3.6.1.4.1.890.1.5.13.13.25.2.3.1 | SnmpAdminString | read-write | Select G.Bond template to be copied. |
| POR gBondTarget | 1.3.6.1.4.1.890.1.5.13.13.25.2.3.2 | PortList | read-write | The target G.Bond interface 101..148 to copy template settings to. |
| INT gBondOperation | 1.3.6.1.4.1.890.1.5.13.13.25.2.3.3 | INTEGER | read-write | Copy the specified G.Bond template to G.Bond target interfaces. The value will return to '0' when clear operation has done. |
| ies5206Conformance | 1.3.6.1.4.1.890.1.5.13.13.26 | |||
| dot3ad | 1.3.6.1.4.1.890.1.5.13.13.27 | |||
| dot3adTable | 1.3.6.1.4.1.890.1.5.13.13.27.1 | not-accessible | The table contains 802.3ad configuration. | |
| dot3adEntry | 1.3.6.1.4.1.890.1.5.13.13.27.1.1 | not-accessible | ||
| INT dot3adGroupId | 1.3.6.1.4.1.890.1.5.13.13.27.1.1.1 | INTEGER | read-only | Group ID of 802.3ad function. |
| INT dot3adEnable | 1.3.6.1.4.1.890.1.5.13.13.27.1.1.2 | INTEGER | read-write | Enable/disable 802.3ad function. |
| POR dot3adGroupPortList | 1.3.6.1.4.1.890.1.5.13.13.27.1.1.4 | PortList | read-write | The port list which joins the trunking group. |
| INT lacpPriority | 1.3.6.1.4.1.890.1.5.13.13.27.2 | INTEGER | read-write | LACP system priority. |
| INT lacpTimeout | 1.3.6.1.4.1.890.1.5.13.13.27.3 | INTEGER | read-write | The time interval to exchange LACP packets in order to check that the peer port in the trunk group is still up. shorttimeout : 1-sec timeout longtimeout : 30-sec timeout |
| dot3adStatusTable | 1.3.6.1.4.1.890.1.5.13.13.27.4 | not-accessible | The table contains 802.3ad status. | |
| dot3adStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.27.4.1 | not-accessible | ||
| INT dot3adStatusGroupId | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.1 | INTEGER | read-only | The dot3ad status group ID. |
| PHY dot3adStatusActor | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.2 | PhysAddress | read-only | The dot3ad status of actor |
| INT dot3adStatusActorPriority | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.3 | INTEGER | read-only | The dot3ad status of actor priority. |
| INT dot3adStatusActorKey | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.4 | INTEGER | read-only | The dot3ad status of actor key. |
| PHY dot3adStatusPartner | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.5 | PhysAddress | read-only | The dot3ad status of remote system of trunking group. |
| INT dot3adStatusPartnerPriority | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.6 | INTEGER | read-only | The dot3ad status of partner priority. |
| INT dot3adStatusPartnerKey | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.7 | INTEGER | read-only | The dot3ad status of partner key. |
| STR dot3adStatusLinks | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.8 | DisplayString | read-only | The ot3ad status of links port. |
| STR dot3adStatusSyncs | 1.3.6.1.4.1.890.1.5.13.13.27.4.1.9 | DisplayString | read-only | The ot3ad status of synchronization state. |
| syslog | 1.3.6.1.4.1.890.1.5.13.13.29 | |||
| syslogServerIpTable | 1.3.6.1.4.1.890.1.5.13.13.29.2 | not-accessible | Sets the IP addresses of Syslog managers (stations to send your Syslog message to). You can configure up to four managers. | |
| syslogServerIpEntry | 1.3.6.1.4.1.890.1.5.13.13.29.2.1 | not-accessible | ||
| INT syslogServerIpIndex | 1.3.6.1.4.1.890.1.5.13.13.29.2.1.1 | INTEGER | read-only | Index of Syslog servers |
| IPt syslogServerIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.29.2.1.2 | InetAddressType | read-write | Syslog server IP address type |
| IP syslogServerIpAddress | 1.3.6.1.4.1.890.1.5.13.13.29.2.1.3 | InetAddress | read-write | Syslog server IP address 0.0.0.0 ~ 223.255.255.255 :: ~ ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff Limit: syslogServerIpAddressType must be set before syslogServerIpAddress. SyslogServerIpAddress set to default value 0.0.0.0, severity will auto set to none |
| INT syslogServerIPSeverity | 1.3.6.1.4.1.890.1.5.13.13.29.2.1.4 | INTEGER | read-write | Severity of Syslog server SyslogServerIpAddress set to default value 0.0.0.0, severity will auto set to none |
| cfm | 1.3.6.1.4.1.890.1.5.13.13.30 | |||
| cfmLoopbackPortTable | 1.3.6.1.4.1.890.1.5.13.13.30.1 | not-accessible | A table that contains CFM information. This table is supported by R5.02 and later versions. | |
| cfmLoopbackPortEntry | 1.3.6.1.4.1.890.1.5.13.13.30.1.1 | not-accessible | An entry in cfmLoopbackPortTable. | |
| INT cfmLoopbackPortState | 1.3.6.1.4.1.890.1.5.13.13.30.1.1.1 | INTEGER | read-write | CFM loopback enable/disable on the port. |
| cfmMIPTable | 1.3.6.1.4.1.890.1.5.13.13.30.2 | not-accessible | ||
| cfmMIPEntry | 1.3.6.1.4.1.890.1.5.13.13.30.2.1 | not-accessible | An entry in cfmMIPTable. | |
| INT cfmLevel | 1.3.6.1.4.1.890.1.5.13.13.30.2.1.1 | INTEGER | read-only | |
| INT cfmVlanID | 1.3.6.1.4.1.890.1.5.13.13.30.2.1.2 | INTEGER | read-only | |
| INT cfmPort | 1.3.6.1.4.1.890.1.5.13.13.30.2.1.3 | INTEGER | read-only | |
| ROW cfmMIPRowStatus | 1.3.6.1.4.1.890.1.5.13.13.30.2.1.4 | RowStatus | read-create | |
| MAC cfmMIPMacAddress | 1.3.6.1.4.1.890.1.5.13.13.30.2.1.5 | MacAddress | read-create | MAC address of maintenance domain intermediate point |
| INT cfmActionEnableStatus | 1.3.6.1.4.1.890.1.5.13.13.30.3 | INTEGER | read-write | CFM Action enable status for the CO device |
| INT cfmMode | 1.3.6.1.4.1.890.1.5.13.13.30.4 | INTEGER | read-write | The compliant CFM standard |
| INT cfmMIPRespondMcastLbm | 1.3.6.1.4.1.890.1.5.13.13.30.5 | INTEGER | read-write | The status indicate whether a MIP respond to mulcast lbms or not. |
| INT cfmLoopbackTimeout | 1.3.6.1.4.1.890.1.5.13.13.30.6 | INTEGER | read-write | CFM loopback timeout value. |
| cfmLbrTable | 1.3.6.1.4.1.890.1.5.13.13.30.7 | not-accessible | This table contains a list of Loopback replies received by a specific MEP in response to a loopback message. | |
| cfmLbrEntry | 1.3.6.1.4.1.890.1.5.13.13.30.7.1 | not-accessible | The Loopback Reply table entry. | |
| U32 cfmLbrSeqNumber | 1.3.6.1.4.1.890.1.5.13.13.30.7.1.1 | Unsigned32 | not-accessible | Transaction identifier/Sequence number returned by a previous transmit loopback message command, indicating which LBM's response is going to be returned. |
| U32 cfmLbrReceiveOrder | 1.3.6.1.4.1.890.1.5.13.13.30.7.1.2 | Unsigned32 | not-accessible | An index to distinguish among multiple LBRs with the same LBR Transaction Identifier field value. cfmLbrReceiveOrder are assigned sequentially from 1, in the order that the Loopback Initiator received the LBRs. |
| MAC cfmLbrSrcMac | 1.3.6.1.4.1.890.1.5.13.13.30.7.1.3 | MacAddress | read-only | Source MAC address returned in the LBR. |
| gpon | 1.3.6.1.4.1.890.1.5.13.13.31 | |||
| ponTable | 1.3.6.1.4.1.890.1.5.13.13.31.1 | |||
| ponSetupTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.1 | not-accessible | ||
| ponSetupEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1 | not-accessible | An entry in ponSetupTable | |
| ENA transceiverTxDisable | 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.1 | EnabledStatus | read-write | transceiver tx disable |
| STR inO7State | 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.2 | DisplayString | read-write | ONT Enter Emergency Stop State(07), input serial number |
| STR outO7State | 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.3 | DisplayString | read-write | ONT Leave Emergency Stop State(07), input serial number |
| INT linkState | 1.3.6.1.4.1.890.1.5.13.13.31.1.1.1.4 | INTEGER | read-only | Show PON link state |
| ponConfigTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.2 | not-accessible | ||
| ponConfigEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1 | not-accessible | An entry in ponConfigTable | |
| INT transceiverType | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.1 | INTEGER | read-write | transceiver Type |
| INT registerMethod | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.2 | INTEGER | read-write | register Method |
| ROW ponConfigRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.3 | RowStatus | read-create | |
| INT templateOption | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.4 | INTEGER | read-write | template-option |
| ENA dsFecMode | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.5 | EnabledStatus | read-write | Enable/disable PON downstream FEC mode |
| U32 tcaFecCorrByteThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.6 | Unsigned32 | read-write | TCA FEC corrected byte threshold |
| U32 tcaFecCorrCodeWordThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.7 | Unsigned32 | read-write | TCA FEC corrected code word threshold |
| U32 tcaFecUncorrCodeWordThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.8 | Unsigned32 | read-write | TCA FEC uncorrected code word threshold |
| U32 tcaBipErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.9 | Unsigned32 | read-write | TCA BIP error threshold |
| U32 tcaReiCounterThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.10 | Unsigned32 | read-write | TCA REI counter threshold |
| INT rangingMax | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.12 | INTEGER | read-write | The maximum of PON ranging distance in km |
| U32 tcaFecCodeWordErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.13 | Unsigned32 | read-write | TCA FEC code word threshold |
| U32 tcaBipByteThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.14 | Unsigned32 | read-write | TCA BIP byte threshold |
| U32 tcaRxPloamCrcErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.15 | Unsigned32 | read-write | TCA rx ploam crc error threshold |
| U32 tcaRxPloamNonIdleThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.16 | Unsigned32 | read-write | TCA rx ploam non idle threshold |
| U32 tcaPositiveDriftThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.17 | Unsigned32 | read-write | TCA positive drift threshold |
| U32 tcaNegativeDriftThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.18 | Unsigned32 | read-write | TCA negative drift threshold |
| U32 tcaRxOmciPacketCrcErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.19 | Unsigned32 | read-write | TCA rx omci crc error threshold |
| U32 tcaUnrecievedBurstThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.20 | Unsigned32 | read-write | TCA unreceived burst threshold |
| U32 tcaLcdgiErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.21 | Unsigned32 | read-write | TCA lcdgi error threshold |
| U32 tcaRdiErrThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.22 | Unsigned32 | read-write | TCA rdi error threshold |
| U32 tcaRxOmciThres | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.23 | Unsigned32 | read-write | TCA rx omci threshold |
| INT tmplateAction | 1.3.6.1.4.1.890.1.5.13.13.31.1.2.1.24 | INTEGER | read-write | Enable or disable the ONT template action of the PON port. |
| unregisterOntTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.3 | not-accessible | ||
| unregisterOntEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1 | not-accessible | An entry in unregisterOntTable | |
| STR unregisterOntSerialNumber | 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.1 | DisplayString | read-only | unregisterOnt Serial Number |
| STR unregisterOntPassword | 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.2 | DisplayString | read-only | unregisterOnt password |
| INT unregisterOntStatus | 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.3 | INTEGER | read-only | unregisterOnt Status |
| INT unregisterOntIndex | 1.3.6.1.4.1.890.1.5.13.13.31.1.3.1.4 | INTEGER | read-only | unregisterOnt Ont Index |
| ponProtectionTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.4 | not-accessible | ||
| ponProtectionEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1 | not-accessible | An entry in ponProtectionTable | |
| INT passivePort | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.1 | INTEGER | not-accessible | The passive port of this protection pair. |
| INT currWorkingPort | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.2 | INTEGER | read-only | The current working port. System is trying to bring up ONU at this port. |
| INT currStandbyPort | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.3 | INTEGER | read-only | The current standby port. After a switch-over event occurs, it will be the next working port. |
| INT delimiterDetectedOnStandbyPort | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.4 | INTEGER | read-only | It indicates whether the current standby port can detect delimiter on the PON fiber. true(1) indicates at least one delimiter is detected when user query this MIB, false(2) indicates no delimiter is detected. |
| INT lastSwitchOverReason | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.5 | INTEGER | read-only | It indicates the reason causes the last switch-over event. noData(0) indicates no switch-over event happened. lossOfSignal(1) indicates LOS happened on the working port. manual(2) indicates administrator triggered it manully. chipConnectionFailure(3) indicates system lost the connection to the GPON chip. noOnuDetected(4) indicates no ONU detected at working port. |
| INT lastSwitchOverTimeStampYear | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.6 | INTEGER | read-only | It indicates the year the last switch-over event happened. |
| INT lastSwitchOverTimeStampMonth | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.7 | INTEGER | read-only | It indicates the month the last switch-over event happened. |
| INT lastSwitchOverTimeStampDay | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.8 | INTEGER | read-only | It indicates the day the last switch-over event happened. |
| INT lastSwitchOverTimeStampHour | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.9 | INTEGER | read-only | It indicates the hour the last switch-over event happened. |
| INT lastSwitchOverTimeStampMinute | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.10 | INTEGER | read-only | It indicates the minute the last switch-over event happened. |
| INT lastSwitchOverTimeStampSecond | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.11 | INTEGER | read-only | It indicates the second the last switch-over event happened. |
| INT switchOverTimes | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.12 | INTEGER | read-only | It indicates the times of switch-over event happened since the protection pair was activated. |
| ROW protectSwitchPonRowstatus | 1.3.6.1.4.1.890.1.5.13.13.31.1.4.1.13 | RowStatus | read-create | Row Status for a protection pair. |
| ponRogueOnuTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.5 | not-accessible | ||
| ponRogueOnuEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.5.1 | not-accessible | An entry in ponRogueOnuTable | |
| INT rogueDetect | 1.3.6.1.4.1.890.1.5.13.13.31.1.5.1.1 | INTEGER | read-write | Start or Stop rogue onu detect |
| ponPortBridge | 1.3.6.1.4.1.890.1.5.13.13.31.1.6 | |||
| ENA ponPortBridgeState | 1.3.6.1.4.1.890.1.5.13.13.31.1.6.1 | EnabledStatus | read-write | |
| ponPortBridgePortTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.6.2 | not-accessible | ||
| ponPortBridgePortEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.6.2.1 | not-accessible | An entry in portBridgePortTable. | |
| ENA ponPortBridgePortState | 1.3.6.1.4.1.890.1.5.13.13.31.1.6.2.1.1 | EnabledStatus | read-write | Port Bridge enabled/disabled on the port. Enable(1) means local switching is allowed in this port. |
| ponAntiSpoof | 1.3.6.1.4.1.890.1.5.13.13.31.1.7 | |||
| ponAntiSpoofPortTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.1 | not-accessible | ||
| ponAntiSpoofPortEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.1.1 | not-accessible | An entry in ponAngiSpoofPortTable | |
| INT ponAntiSpoofActiveByPort | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.1.1.1 | INTEGER | read-write | Pon port anti-spoofing enabled/disabled on the port. enabled(1) means local switching is allowed in this port. |
| ponAntiSpoofTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2 | not-accessible | ||
| ponAntiSpoofEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1 | not-accessible | An entry in ponAngiSpoofTable | |
| INT ponAntiSpoofMode | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1.2 | INTEGER | read-only | Display the entry is inclusive/exclusive for IP/MAC/OUIMAC. |
| STR ponAntiSpoofSetting | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1.3 | DisplayString | read-only | Display the IP/MAC/IP&MAC/OUI-MAC setting of the anti-spoofing. |
| ROW ponAntiSpoofRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.1.7.2.1.4 | RowStatus | read-create | Create or distory a anti-spoofing of a pon port. ex 1: create a inclusiveIp entry with ip 192.168.100.100 on port 1-1, then the key is 10001.1.255.255.255.255.255.255.192.168.100.100 ex 2: create a exclusiveMac entry with mac 00:0A:0B:01:02:03 on port 2-2, then the key is 20002.3.0.10.11.1.2.3.255.255.255.255 ex 3: create a inclusiveOuimac entry with mac 00:0A:0B on port 1-3, then the key is 10003.8.0.10.11.255.255.255.255.255.255.255 |
| ponIpsb | 1.3.6.1.4.1.890.1.5.13.13.31.1.8 | |||
| ponIpsbSetupTable | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1 | not-accessible | ||
| ponIpsbSetupEntry | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1 | not-accessible | An entry in ponIpsbSetupTable | |
| PHY ipsbSetupMac | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.1 | PhysAddress | read-only | |
| INT ipsbSetupVid | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.2 | INTEGER | read-only | |
| IP ipsbSetupIp | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.3 | IpAddress | read-write | |
| ROW ipsbSetupState | 1.3.6.1.4.1.890.1.5.13.13.31.1.8.1.1.4 | RowStatus | read-create | |
| remote | 1.3.6.1.4.1.890.1.5.13.13.31.2 | |||
| ontSetup | 1.3.6.1.4.1.890.1.5.13.13.31.2.1 | |||
| ontTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1 | not-accessible | ||
| ontEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1 | not-accessible | An entry in ontTable | |
| INT ontNumber | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.1 | INTEGER | read-only | ontNumber. |
| STR password | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.4 | DisplayString | read-write | password. |
| STR planVersion | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.5 | DisplayString | read-write | plan-version. |
| STR sn | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.6 | DisplayString | read-write | serial number. |
| ENA loopbackConfig | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.7 | EnabledStatus | read-write | enabled/disabled loopback on the port. |
| INT loopbackStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.8 | INTEGER | read-only | This entry display latest loopback test status of port while performing remote-ont loopback test. |
| INT model | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.9 | INTEGER | read-write | Model ID. |
| ROW ontRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.10 | RowStatus | read-create | |
| INT ontAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.11 | INTEGER | read-write | Setting this MIB with value below to request an action to occur for the ONU. 1 Reboot the ONU. 2 Perform a FW version check. If the current version mismatches with planned one, do FW upgrade if possible. 4 Delete all configuration stored in OLT related to the ONU. 5 Perform a file transfer. Download a file located in with user name / password defined in and to the ONU and rename it to . 6 Perform a file transfer. Upload a file from the ONU to destination defined in with user name / password defined in and . 7 Switch the ONU active/standby image rule and reboot. 8 Clear the ont upgrade status. This MIB returns following status to a get request. 0 This ONU is not doing any action above. 3 The FW upgrading is in progress. |
| STR alarmProfile | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.12 | DisplayString | read-write | apply an alarm profile to configure remote ONT ddmi threshold. |
| INT fullBridg | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.13 | INTEGER | read-write | full-bridge mode |
| INT antiMacSpoofing | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.14 | INTEGER | read-write | anti-mac-spoofing active or inactive |
| ENA usFecMode | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.15 | EnabledStatus | read-write | Enable/disable ONU upstream FEC mode |
| STR templateDescription | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.1.1.16 | DisplayString | read-write | ONT template description |
| ontBwGroupTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2 | not-accessible | ||
| ontBwGroupEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1 | not-accessible | An entry in ontBwGroupTable | |
| INT ontBwGroupId | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.1 | INTEGER | not-accessible | Bandwidth group means US T-CONT (Transmission container)and DS BW meter |
| INT ontBwGroupUstype | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.2 | INTEGER | read-write | US T-CONT type is characterized by the traffic flows. |
| STR ontBwGroupUsbwprofname | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.3 | DisplayString | read-write | Upstream bandwidth profile name. |
| STR ontBwGroupDsbwprofname | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.4 | DisplayString | read-write | Downstream bandwidth profile name. |
| ROW ontBwGroupRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.2.1.5 | RowStatus | read-create | |
| ontFileTransferParamTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3 | not-accessible | ||
| ontFileTransferParamEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1 | not-accessible | Entry in ontFileTransferParamTable | |
| OCT ontFileTransferFileUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.1 | OCTET STRING | read-write | The URL to be used in file transfer. For example: ftp://a.b.c/dir/config.xml |
| OCT ontFileTransferLocalFileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.2 | OCTET STRING | read-write | The file name of the target file in the ONU. For example: config.xml |
| OCT ontFileTransferUserName | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.3 | OCTET STRING | read-write | The user name to be used for the file transfer. |
| OCT ontFileTransferPassword | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.3.1.4 | OCTET STRING | read-write | The password to be used for the file transfer. |
| ontFwUpgrade | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4 | |||
| ontFwUpgradeSetup | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1 | |||
| STR ontImageVersion | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1.1 | DisplayString | read-write | ONT image version name. |
| INT releaseOntImage | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1.2 | INTEGER | read-write | release ONT image from OLT. |
| INT numOfOntInQueue | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.1.3 | INTEGER | read-only | The number of ONTs in FW upgrade queue. |
| ontFwUpgradeTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2 | not-accessible | ||
| ontFwUpgradeEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2.1 | not-accessible | Entry in ontFwUpgradeTable | |
| INT ontFwUpgradeOntNumber | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2.1.1 | INTEGER | read-write | Action to start upgrading ONT firmware with specified ONT number 1~128 (the same to ontAction.upgradingFW); 0 means to upgrade all ONTs of a PON port. |
| INT ontFwUpgradeClearStatusPerPon | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.4.2.1.2 | INTEGER | read-write | Cleared all of the ONT upgrade status of the pon port. |
| ontResetTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5 | not-accessible | ||
| ontResetEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1 | not-accessible | An entry in ontResetTable1102 | |
| INT ontResetAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1.1 | INTEGER | read-write | ont Reset Action,Value 1: Load Factory Default,Value 2: Reset Default |
| INT ontConfgurationStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1.2 | INTEGER | read-write | ont Confguration Status.Value 0: In default state |
| INT ontTimeOfRestore | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.5.1.3 | INTEGER | read-write | Unix time seconds since midnight January 1,1970). |
| ontWanConfigTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6 | not-accessible | ||
| ontWanConfigEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1 | not-accessible | An entry in ontWanConfigTable | |
| INT ontWanConfigId | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.1 | INTEGER | not-accessible | ont wan config wan id |
| INT ontWanConfigVlan | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.2 | INTEGER | read-write | ont wan vlan. |
| INT ontWanConfigPriority | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.3 | INTEGER | read-write | ont wan priority. |
| INT ontWanConfigNat | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.4 | INTEGER | read-write | ont wan nat config. |
| STR ontWanConfigUsername | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.5 | DisplayString | read-write | ont wan config user name. |
| STR ontWanConfigPassword | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.6 | DisplayString | read-write | ont wan config password. |
| ROW ontWanConfigRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.1.6.1.7 | RowStatus | read-create | |
| ontcardTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.2 | not-accessible | ||
| ontcardEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1 | not-accessible | An entry in ontcardTable | |
| INT ontcard | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.1 | INTEGER | read-only | ontcard. |
| INT ontcardType | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.2 | INTEGER | read-write | cardtype. |
| INT numofport | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.3 | INTEGER | read-write | numofport. |
| ROW ontcardRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.4 | RowStatus | read-create | |
| INT ontcardAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.2.1.5 | INTEGER | read-write | Delete all configurations relating to ontcard. |
| ontenetTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.3 | not-accessible | ||
| ontenetEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1 | not-accessible | An entry in ontenetTable | |
| INT ontenetCardPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.1 | INTEGER | not-accessible | ontenetCardPort. |
| INT pmenetEnable | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.2 | INTEGER | read-write | pmenetEnable. |
| INT portSpeed | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.3 | INTEGER | read-write | port-speed. |
| ROW ontenetRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.4 | RowStatus | read-create | |
| INT ontenetAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.3.1.5 | INTEGER | read-write | Delete all configurations relating to ontenet. |
| ontvdslTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.4 | not-accessible | ||
| ontvdslEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1 | not-accessible | An entry in ontvdslTable | |
| INT ontvdslCardPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.1 | INTEGER | not-accessible | ontvdslCardPort. |
| STR lineTemplate | 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.2 | DisplayString | read-write | line-template. |
| ROW ontvdslRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.3 | RowStatus | read-create | |
| INT ontvdslAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.4.1.4 | INTEGER | read-write | Delete all configurations relating to ontvdsl. |
| ontuniportSetup | 1.3.6.1.4.1.890.1.5.13.13.31.2.5 | |||
| ontuniportTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1 | not-accessible | ||
| ontuniportEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1 | not-accessible | An entry in ontuniportTable. | |
| INT uniPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.1 | INTEGER | read-only | uniport |
| ROW uniPortRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.2 | RowStatus | read-create | |
| INT uniPortAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.3 | INTEGER | read-write | Delete all configurations relating to uniport. |
| INT uniportMacLimit | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.1.1.4 | INTEGER | read-write | maximum number of mac addresses can be learned per uniport. Zero value means mac-limit is inactive and no mac-address limitation. |
| uniportIgmpchannelTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2 | not-accessible | ||
| uniportIgmpchannelEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1 | not-accessible | An entry in igmpchannelTable. | |
| INT uniportIgmpchannelUniSvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.1 | INTEGER | read-only | uni-svid |
| INT uniportIgmpchannelUniCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.2 | INTEGER | read-only | uni-cvid |
| INT uniportIgmpchannelVersion | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.3 | INTEGER | read-write | IGMP version |
| INT uniportIgmpchannelMaxgroup | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.4 | INTEGER | read-write | Maximum number of groups. |
| INT uniportIgmpchannelMaxmsg | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.5 | INTEGER | read-write | Maximum number of reports per second. |
| ROW uniportIgmpchannelRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.10 | RowStatus | read-create | |
| INT uniportIgmpchannelTrafficTxTag | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.11 | INTEGER | read-write | Traffic tag on UNI port. If replace(5) is set, then uniportIgmpchannelTrafficTxTagRepVid will be applied. |
| STR uniportIgmpchannelCacProf | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.12 | DisplayString | read-write | The maximum multicast bandwidth for this channel |
| INT uniportIgmpchannelTrafficTxTagRepVid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.13 | INTEGER | read-write | Replaced downstream VID. It is applied only when uniportIgmpchannelTrafficTxTag is set to replace(5). |
| STR uniportIgmpchannelGroupPrivProf | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.14 | DisplayString | read-only | The group privilege profile this channel wants to apply. If the group privilege profile is set, both previewPkg and fullviewPkg settings will be ignored. |
| INT uniportIgmpchannelMvlan | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.2.1.15 | INTEGER | read-write | MVR receive port. It works only when group-privilege-profile is set, 0 means non-MVR. |
| uniportProtoBasedTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3 | not-accessible | ||
| uniportProtoBasedEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1 | not-accessible | An entry in protocol-basedTable. | |
| INT uniportProtoBasedEtherType | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.1 | INTEGER | not-accessible | ethernet Type. ipoe(1) pppoe(2) arp(3) ipv6(4) |
| INT uniportProtoBasedSvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.2 | INTEGER | read-write | SVID |
| INT uniportProtoBasedCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.3 | INTEGER | read-write | CVID |
| INT uniportProtoBasedPriority | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.4 | INTEGER | read-write | priority |
| ROW uniportProtoBasedRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.3.1.5 | RowStatus | read-create | |
| uniportPvidTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4 | not-accessible | ||
| uniportPvidEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1 | not-accessible | An entry in pvidTable. | |
| INT uniportPvidUniSvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.1 | INTEGER | read-write | SVID |
| INT uniportPvidUniCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.2 | INTEGER | read-write | CVID |
| INT uniportPvidPriority | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.3 | INTEGER | read-write | Pvid priority |
| ROW uniportPvidRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.4.1.4 | RowStatus | read-create | |
| uniportQueueTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5 | not-accessible | ||
| uniportQueueEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1 | not-accessible | An entry in queueTable. | |
| INT uniportQueueTc | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.1 | INTEGER | not-accessible | traffic class 0-7 |
| INT uniportQueuePriority | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.2 | INTEGER | read-write | Usqueue priority 0-7 |
| INT uniportQueueWeight | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.3 | INTEGER | read-write | Usqueue weight 0-255 |
| STR uniportQueueUsbwprofname | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.4 | DisplayString | read-write | usbwprof name |
| STR uniportQueueDsbwprofname | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.5 | DisplayString | read-write | dsbwprof name |
| INT uniportQueueDsoption | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.6 | INTEGER | read-write | queue ds option,do metering at OLT side or ONT side |
| INT uniportQueueUsbwsharegroupid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.7 | INTEGER | read-write | upstream bandwidth group id |
| ROW uniportQueueRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.8 | RowStatus | read-create | |
| INT uniportQueueDsbwsharegroupid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.5.1.9 | INTEGER | read-write | downstream bandwidth group id |
| uniportVlanTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6 | not-accessible | ||
| uniportVlanEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1 | not-accessible | An entry in uniportVlanTable. | |
| INT uniportVlanUniSvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.1 | INTEGER | not-accessible | uni-svid |
| INT uniportVlanUniCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.2 | INTEGER | not-accessible | uni-cvid |
| INT uniportVlanNetworkSvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.3 | INTEGER | read-write | network-svid |
| INT uniportVlanNetworkSpri | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.4 | INTEGER | read-write | network-spri |
| INT uniportVlanNetworkCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.5 | INTEGER | read-write | network-cvid |
| STR uniportVlanIngProf | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.6 | DisplayString | read-write | ingProf |
| INT uniportVlanGemPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.7 | INTEGER | read-write | gemPort |
| INT uniportVlanTr156 | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.8 | INTEGER | read-write | tr156 |
| INT uniportVlanTxTag | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.9 | INTEGER | read-write | txtag |
| STR uniportVlanPbitProf | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.10 | DisplayString | read-write | pbit profile |
| INT uniportVlanDscpToPbit | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.11 | INTEGER | read-write | dscp to pbit active/inactive |
| INT uniportVlanAesEncrypt | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.12 | INTEGER | read-write | AES encryption |
| ROW uniportVlanRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.13 | RowStatus | read-create | |
| INT uniportVlanSharePriority | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.14 | INTEGER | read-write | Share priority. Specify 8 to disable the priority. |
| INT uniportVlanMacNumber | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.6.1.15 | INTEGER | read-write | MAC number. |
| uniportVoipTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7 | not-accessible | ||
| uniportVoipEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1 | not-accessible | An entry in uniportVoipTable. | |
| INT uniportVoipMode | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.1 | INTEGER | read-write | set ONT Voip mode. It just can be set to sip mode, now. |
| INT uniportVoipUniCvid | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.2 | INTEGER | read-write | set ONT Voip vlan(1 ~ 4094). |
| STR uniportVoipCommProfName | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.3 | DisplayString | read-write | set ONT Voip common profile name(1 ~ 15 characters). |
| STR uniportVoipSipProfName | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.4 | DisplayString | read-write | set ONT Voip sip profile name(1 ~ 15 characters). |
| STR uniportVoipUsername | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.5 | DisplayString | read-write | set ONT Voip user name(1 ~ 63 characters). |
| STR uniportVoipPassword | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.6 | DisplayString | read-write | set ONT Voip password(1 ~ 63 characters). |
| STR uniportVoipDialPlanName | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.7 | DisplayString | read-write | set ONT Voip network dial plan name(1 ~ 15 characters) |
| STR uniportVoipAor | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.8 | DisplayString | read-write | set ONT Voip user part AOR(1 ~ 63 characters). |
| STR uniportVoipDispName | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.9 | DisplayString | read-write | set ONT Voip sip display name(1 ~ 25 characters). |
| STR uniportVoipVmailUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.10 | DisplayString | read-write | set ONT Voip voicemail server SIP URI(1 ~ 63 characters) |
| INT uniportVoipVmailExtimer | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.11 | INTEGER | read-write | set ONT Voip voice subscription expiration time(0 ~ 3600) |
| INT uniportVoipReleaseTimer | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.12 | INTEGER | read-write | set ONT Voip release timer( 0 ~ 30) |
| INT uniportVoipRohTimer | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.13 | INTEGER | read-write | set ONT Voip ROH timer( 0 ~ 30) |
| ROW uniportVoipRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.7.1.14 | RowStatus | read-create | |
| uniportOntCardTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8 | not-accessible | ||
| uniportOntCardEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1 | not-accessible | An entry in uniportOntCardTable. | |
| INT uniportOntCardTypeActive | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.1 | INTEGER | read-write | Activate/Inactivate ONT ENET/VEIP/POTS/VIDEO |
| INT uniportOntEnetVeipPmEnable | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.2 | INTEGER | read-write | Enable/Disable PM counter of ONT ENET/VEIP |
| INT uniportOntEnetPortSpeed | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.3 | INTEGER | read-write | Enable/Disable port speed of ONT ENET |
| ROW uniportOntCardRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.5.8.1.4 | RowStatus | read-create | The row status of uniportOntCardTable |
| ontQos | 1.3.6.1.4.1.890.1.5.13.13.31.2.6 | |||
| ingressProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1 | not-accessible | ||
| ingressProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1 | not-accessible | An entry in ONT QoS ingress profile table. | |
| OCT ingressProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.1 | OCTET STRING | read-only | ONT QoS Ingress Profile Name. |
| INT ingressProfileDot1p0tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.2 | INTEGER | read-write | set traffic class mapping to 802.1P priority 0. |
| INT ingressProfileDot1p1tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.3 | INTEGER | read-write | set traffic class mapping to 802.1P priority 1. |
| INT ingressProfileDot1p2tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.4 | INTEGER | read-write | set traffic class mapping to 802.1P priority 2. |
| INT ingressProfileDot1p3tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.5 | INTEGER | read-write | set traffic class mapping to 802.1P priority 3. |
| INT ingressProfileDot1p4tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.6 | INTEGER | read-write | set traffic class mapping to 802.1P priority 4. |
| INT ingressProfileDot1p5tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.7 | INTEGER | read-write | set traffic class mapping to 802.1P priority 5. |
| INT ingressProfileDot1p6tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.8 | INTEGER | read-write | set traffic class mapping to 802.1P priority 6. |
| INT ingressProfileDot1p7tc | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.9 | INTEGER | read-write | set traffic class mapping to 802.1P priority 7. |
| ROW ingressProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.1.1.10 | RowStatus | read-create | |
| pbitProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2 | not-accessible | ||
| pbitProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1 | not-accessible | An entry in ONT QoS pbit profile table. | |
| OCT pbitProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.1 | OCTET STRING | read-only | ONT QoS pbit Profile Name. |
| INT pbitProfileP0to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.2 | INTEGER | read-write | set traffic class mapping to 802.1P priority 0. |
| INT pbitProfileP1to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.3 | INTEGER | read-write | set traffic class mapping to 802.1P priority 1. |
| INT pbitProfileP2to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.4 | INTEGER | read-write | set traffic class mapping to 802.1P priority 2. |
| INT pbitProfileP3to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.5 | INTEGER | read-write | set traffic class mapping to 802.1P priority 3. |
| INT pbitProfileP4to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.6 | INTEGER | read-write | set traffic class mapping to 802.1P priority 4. |
| INT pbitProfileP5to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.7 | INTEGER | read-write | set traffic class mapping to 802.1P priority 5. |
| INT pbitProfileP6to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.8 | INTEGER | read-write | set traffic class mapping to 802.1P priority 6. |
| INT pbitProfileP7to | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.9 | INTEGER | read-write | set traffic class mapping to 802.1P priority 7. |
| ROW pbitProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.2.1.10 | RowStatus | read-create | |
| bwProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3 | not-accessible | ||
| bwProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1 | not-accessible | An entry in ONT QoS bandwidth profile table. | |
| OCT bwProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.1 | OCTET STRING | read-only | ONT QoS Bandwidth Profile Name. |
| INT bwProfileSir | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.2 | INTEGER | read-write | set SIR value. |
| INT bwProfileAir | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.3 | INTEGER | read-write | set AIR value. |
| INT bwProfilePir | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.4 | INTEGER | read-write | set PIR value. |
| ROW bwProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.5 | RowStatus | read-create | |
| INT bwProfileUstype | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.3.1.6 | INTEGER | read-write | Modify the upstream type. US TCONT Type +-----------------+---------+---------+---------+-------+--------------+ | Type0 | Type1 | Type2 | Type3 | Type4 | Type5 | | | | | | | | +-----------------+---------+---------+---------+-------+--------------+ | | sir | | | | sir | + auto-correction +---------+---------+---------+-------+--------------+ | when ustype | | air | air | | air | + is setting to 0 +---------+---------+---------+-------+--------------+ | | pir=sir | pir=air | pir>air | pir | pir>=sir+air | +-----------------+-------------------+---------+-------+--------------+ PS: If After auto-correction, the type still is 0, then the profile can`t be used as a US profile. |
| cacProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4 | not-accessible | ||
| cacProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1 | not-accessible | An entry in ONT QoS CAC profile table. | |
| OCT cacProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1.1 | OCTET STRING | read-only | ONT QoS CAC profile name |
| INT cacProfileMcastBw | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1.2 | INTEGER | read-write | set multicast bandwidth in kbps |
| ROW cacProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.4.1.3 | RowStatus | read-create | |
| ENA gponQosWred | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.5 | EnabledStatus | read-write | enable/disable gpon qos wred. |
| INT gponQosDsMeter | 1.3.6.1.4.1.890.1.5.13.13.31.2.6.6 | INTEGER | read-write | gpon qos ds-meter. |
| ontAlarmProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.7 | not-accessible | ||
| ontAlarmProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1 | not-accessible | An entry in ONT Alarm profile table for DDMI threshold setting. | |
| OCT ontAlarmProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.1 | OCTET STRING | read-only | ONT Alarm Profile Name. |
| STR ontAlarmProfileFeedVoltThreshLow | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.2 | DisplayString | read-write | set Lower Power Feed Voltage Threshold (unit V). The range of voltage is between 2.80 and 3.59 V. |
| STR ontAlarmProfileFeedVoltThreshUp | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.3 | DisplayString | read-write | set Upper Power Feed Voltage Threshold (unit V). The range of voltage is between 2.80 and 3.59 V. |
| STR ontAlarmProfileBiasCurrThreshLow | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.4 | DisplayString | read-write | set Lower Laser Bias Current Threshold (unit mA). The range of current is between 0 and 79 mA. |
| STR ontAlarmProfileBiasCurrThreshUp | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.5 | DisplayString | read-write | set Upper Laser Bias Current Threshold (unit mA). The range of current is between 0 and 79 mA. |
| STR ontAlarmProfileTemperatureThreshLow | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.6 | DisplayString | read-write | set Lower Temperature Threshold (unit degree C). The range of temperature is between -40 and 100 degree C. |
| STR ontAlarmProfileTemperatureThreshUp | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.7 | DisplayString | read-write | set Upper Temperature Threshold (unit degree C). The range of temperature is between -40 and 100 degree C. |
| STR ontAlarmProfileTxPowerThreshLow | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.8 | DisplayString | read-write | set Lower Transmit Power Threshold (unit dBm). The range of power is between -15.3 and 6.5 dBm. |
| STR ontAlarmProfileTxPowerThreshUp | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.9 | DisplayString | read-write | set Upper Transmit Power Threshold (unit dBm). The range of power is between -15.3 and 6.5 dBm. |
| ROW ontAlarmProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.10 | RowStatus | read-create | |
| STR ontAlarmProfileRxPowerThreshLow | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.11 | DisplayString | read-write | set Lower Receive Power Threshold (unit dBm). The range of power is between -127 and 0 dBm. |
| STR ontAlarmProfileRxPowerThreshUp | 1.3.6.1.4.1.890.1.5.13.13.31.2.7.1.12 | DisplayString | read-write | set Upper Receive Power Threshold (unit dBm). The range of power is between -127 and 0 dBm. |
| ontvenetTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.8 | not-accessible | ||
| ontvenetEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1 | not-accessible | An entry in ontvenetTable | |
| INT ontvenetCardPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.1 | INTEGER | not-accessible | ontvenetCardPort. |
| INT pmvenetEnable | 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.2 | INTEGER | read-write | pmvenetEnable. |
| ROW ontvenetRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.3 | RowStatus | read-create | |
| INT ontvenetAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.8.1.4 | INTEGER | read-write | Delete all configurations relating to ontvenet. |
| ontpotsTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.9 | not-accessible | ||
| ontpotsEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1 | not-accessible | An entry in ontpotsTable | |
| INT ontpotsCardPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1.1 | INTEGER | not-accessible | ontpotsCardPort. |
| ROW ontpotsRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1.2 | RowStatus | read-create | |
| INT ontpotsAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.9.1.3 | INTEGER | read-write | Delete all configurations relating to ontpots. |
| ontVoipProfile | 1.3.6.1.4.1.890.1.5.13.13.31.2.10 | |||
| sipProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1 | not-accessible | ||
| sipProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1 | not-accessible | An entry in ONT Voip sip profile table. | |
| STR sipProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.1 | DisplayString | read-only | ONT Voip sip profile name(1 ~ 15 characters). |
| STR sipProfileProxyServiceAddr | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.2 | DisplayString | read-write | set ONT Voip proxy service address(1 ~ 63 characters). |
| STR sipProfileOutProxyAddr | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.3 | DisplayString | read-write | set ONT Voip out proxy address(1 ~ 15 characters). |
| IP sipProfilePriDns | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.4 | IpAddress | read-write | set ONT Voip primary sip dns(ip format). |
| IP sipProfileSecDns | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.5 | IpAddress | read-write | set ONT Voip secondary sip dns(ip format). |
| INT sipProfileRegExpTime | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.6 | INTEGER | read-write | set ONT Voip sip registration expiration time(0 ~ 25200 sec). |
| INT sipProfileReregHeadStartTime | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.7 | INTEGER | read-write | set ONT Voip sip re-registration head start time(0 ~ 720 sec). |
| STR sipProfileHostPartUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.8 | DisplayString | read-write | set ONT Voip host or domain part of the sip address(1 ~ 63 characters). |
| STR sipProfileRegistrar | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.9 | DisplayString | read-write | set ONT Voip sip registrar address(1 ~ 63 characters). |
| STR sipProfileSoftSwitch | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.10 | DisplayString | read-write | set ONT Voip sip gateway softswitch vendor. This format os four ASCII coded alphabetic characters[A..Z] as defined in ANSI T1.220(4 characters). |
| BIT sipProfileCid | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.11 | Bits | read-write | set ONT sip caller ID features. |
| BIT sipProfileCallWait | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.12 | Bits | read-write | set ONT sip call waiting feature. |
| BIT sipProfileCallProgTrans | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.13 | Bits | read-write | set ONT sip progress or transfer feature. |
| BIT sipProfileCallPresent | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.14 | Bits | read-write | set ONT sip call presentation feature. |
| BIT sipProfileDirectCon | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.15 | Bits | read-write | set ONT sip direct connect feature. |
| STR sipProfileDirectConUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.16 | DisplayString | read-write | set ONT direct connect URI(1 ~ 63 characters). |
| STR sipProfileBridgeLineAgentUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.17 | DisplayString | read-write | set ONT bridge line agent URI(1 ~ 63 characters). |
| STR sipProfileConfFactoryUri | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.18 | DisplayString | read-write | set ONT conference factory URI(1 ~ 63 characters). |
| ROW sipProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.1.1.19 | RowStatus | read-create | |
| commonProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2 | not-accessible | ||
| commonProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1 | not-accessible | An entry in ONT Voip common profile table. | |
| STR commonProfileName | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.1 | DisplayString | read-only | ONT Voip common profile name(1 ~ 15 characters). |
| INT commonProfileLocalPortMin | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.2 | INTEGER | read-write | set ONT Voip base RTP port(1 ~ 65535, but must smaller than highest RTP port). |
| INT commonProfileLocalPortMax | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.3 | INTEGER | read-write | set ONT Voip highest RTP port(1 ~ 65535, but must bigger than highest RTP port). |
| INT commonProfileDscpMark | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.4 | INTEGER | read-write | set ONT Voip diffserv code point to be used for utgoing RTP packets for this profile(0 ~ 63). |
| INT commonProfilePiggyback | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.5 | INTEGER | read-write | set ONT Voip RTP piggyback events. |
| INT commonProfileTone | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.6 | INTEGER | read-write | set ONT Voip handlin of tones via RTP tone events per RFC 4733. |
| INT commonProfileDtmf | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.7 | INTEGER | read-write | set ONT Voip handling of DTMF via RTP DTMF events per RFC 4733. |
| INT commonProfileCas | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.8 | INTEGER | read-write | set ONT Voip handling of CAS via RTP CAS events per RFC 4733. |
| INT commonProfileAnnounceType | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.9 | INTEGER | read-write | set ONT Voip treatment when a subscriber goes off hook but dose not attempt a call. |
| INT commonProfileJitterTarget | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.10 | INTEGER | read-write | set ONT Voip target value of the jitter buffer in milliseconds(0 ~ 500 milliseconds). |
| INT commonProfileJitterBufMax | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.11 | INTEGER | read-write | set ONT Voip maximum depth of the jitter buffer associated with this service in milliseconds(0 ~ 5000 milliseconds). |
| INT commonProfileEchoCancel | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.12 | INTEGER | read-write | set ONT Voip echo cancellation. |
| INT commonProfilePstnProtocol | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.13 | INTEGER | read-write | set ONT Voip pstn protocol the value is equal to the E.164 country code. ex: taiwan is 886. |
| INT commonProfileFaxMode | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.14 | INTEGER | read-write | set ONT Voip fax mode. |
| INT commonProfile1stCodec | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.15 | INTEGER | read-write | set ONT Voip codec selection as defined by RFC 3551. |
| INT commonProfile2ndCodec | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.16 | INTEGER | read-write | set ONT Voip codec selection as defined by RFC 3551. |
| INT commonProfile3rdCodec | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.17 | INTEGER | read-write | set ONT Voip codec selection as defined by RFC 3551. |
| INT commonProfile4thCodec | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.18 | INTEGER | read-write | set ONT Voip codec selection as defined by RFC 3551. |
| INT commonProfile1stPacketPeriod | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.19 | INTEGER | read-write | set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). |
| INT commonProfile2ndPacketPeriod | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.20 | INTEGER | read-write | set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). |
| INT commonProfile3rdPacketPeriod | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.21 | INTEGER | read-write | set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). |
| INT commonProfile4thPacketPeriod | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.22 | INTEGER | read-write | set ONT Voip packet period selection interval in milliseconds(10 ~ 30 milliseconds). |
| INT commonProfile1stSilence | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.23 | INTEGER | read-write | set ONT Voip silence suppression. |
| INT commonProfile2ndSilence | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.24 | INTEGER | read-write | set ONT Voip silence suppression. |
| INT commonProfile3rdSilence | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.25 | INTEGER | read-write | set ONT Voip silence suppression. |
| INT commonProfile4thSilence | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.26 | INTEGER | read-write | set ONT Voip silence suppression. |
| INT commonProfileOobDtmf | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.27 | INTEGER | read-write | set ONT Voip out of band DTMF carriage. |
| ROW commonProfileRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.28 | RowStatus | read-create | |
| INT commonProfileSignalCode | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.2.1.29 | INTEGER | read-write | set ONT Voip signal conde. |
| dialPlan | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3 | |||
| dialPlanCommTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1 | not-accessible | ||
| dialPlanCommEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1 | not-accessible | An entry in ONT Voip network dial plan common table. | |
| STR dialPlanCommName | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.1 | DisplayString | read-only | ONT Voip network dial plan Name(1 ~ 15 characters). |
| INT dialPlanCommMaxSize | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.2 | INTEGER | read-write | set ONT Voip maximum number of dial plans(1 ~ 256). |
| INT dialPlanCommCriticalTimeout | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.3 | INTEGER | read-write | set ONT Voip critical dial timeout for digit map processing in milliseconds(0 ~ 8000 milliseconds). |
| INT dialPlanCommPartialTimeout | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.4 | INTEGER | read-write | set ONT Voip partial dial timeout for digit map processing in milliseconds(0 ~ 32000 milliseconds). |
| INT dialPlanCommFormat | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.5 | INTEGER | read-write | set ONT Voip dial plan format standard that is supported in the ONT for Voip. |
| ROW dialPlanCommRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.1.1.6 | RowStatus | read-create | |
| dialPlanContTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2 | not-accessible | ||
| dialPlanContEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1 | not-accessible | An entry in ONT Voip network dial plan content table. | |
| OCT dialPlanContName | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.1 | OCTET STRING | read-only | ONT Voip network dial plan Name. When get or set this object, The value of the object will be parsed to ASCII on SNMPc application. |
| INT dialPlanContId | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.2 | INTEGER | read-only | set ONT Voip dial plans id(1 ~ 16). |
| OCT dialPlanContToken | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.3 | OCTET STRING | read-write | set ONT Voip dial plan token(1 ~ 28 characters). When get or set this object, The value of the object will be parsed to ASCII on SNMPc application. |
| ROW dialPlanContRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.10.3.2.1.4 | RowStatus | read-create | |
| ontvideoTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.11 | not-accessible | ||
| ontvideoEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1 | not-accessible | An entry in ontvideoTable | |
| INT ontvideoPort | 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1.1 | INTEGER | not-accessible | ontvideoPort. |
| ROW ontvideoRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1.2 | RowStatus | read-create | |
| INT ontvideoAction | 1.3.6.1.4.1.890.1.5.13.13.31.2.11.1.3 | INTEGER | read-write | Delete all configurations relating to ontvideo. |
| onuModelTable | 1.3.6.1.4.1.890.1.5.13.13.31.2.12 | not-accessible | ||
| onuModelEntry | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1 | not-accessible | An entry in ONU model table. | |
| OCT onuModelName | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.1 | OCTET STRING | read-write | ONU model name. |
| INT onuModelID | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.2 | INTEGER | read-write | ONU model ID. |
| OCT onuModelVendorVersion | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.3 | OCTET STRING | read-only | ONU model vendor version name. |
| OCT onuModelSoftwareVersion | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.4 | OCTET STRING | read-write | ONU model software version. |
| INT onuModelCard1 | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.5 | INTEGER | read-write | ONU model GIGA Card entity ID. 0 means no this card. |
| INT onuModelCard2 | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.6 | INTEGER | read-write | ONU model VEIP Card entity ID. 0 means no this card. |
| INT onuModelCard3 | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.7 | INTEGER | read-write | ONU model POTS Card entity ID. 0 means no this card. |
| INT onuModelCard4 | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.8 | INTEGER | read-write | ONU model VIDEO Card entity ID. 0 means no this card. |
| INT onuModelCard5 | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.9 | INTEGER | read-write | ONU model 100M Card entity ID. 0 means no this card. |
| ROW onuModelRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.2.12.1.10 | RowStatus | read-create | The status of specified ONU model entry. |
| remoteInfo | 1.3.6.1.4.1.890.1.5.13.13.31.3 | |||
| ponStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.1 | not-accessible | ||
| ponStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1 | not-accessible | An entry in ponStatusTable | |
| INT state | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.1 | INTEGER | read-only | state. |
| INT oltKeyExchange | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.2 | INTEGER | read-only | pon keyExchange. |
| INT snAcq | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.3 | INTEGER | read-only | SNAcq. |
| INT rogueDectect | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.4 | INTEGER | read-only | rogueDectect. |
| INT rogueDestructState | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.5 | INTEGER | read-only | rogueDestructState. |
| INT procInterval | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.6 | INTEGER | read-only | procInterval. |
| INT procIntervalSec | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.7 | INTEGER | read-only | procIntervalSec. |
| INT los | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.8 | INTEGER | read-only | LOS. |
| INT last | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.9 | INTEGER | read-only | Last. |
| INT endOfBurstOffset | 1.3.6.1.4.1.890.1.5.13.13.31.3.1.1.10 | INTEGER | read-only | EndofBurstOffset. |
| ontStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2 | |||
| ontCurrentStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1 | not-accessible | ||
| ontCurrentStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1 | not-accessible | An entry in ontCurrentStatusTable | |
| STR serialNumber | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.1 | DisplayString | read-only | Serial Number. |
| STR passwordOnt | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.2 | DisplayString | read-only | Ont password. |
| REM ontStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.3 | RemoteOnuStatus | read-only | ONT status. |
| STR versionA | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.4 | DisplayString | read-only | versionA |
| STR versionB | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.5 | DisplayString | read-only | versionB |
| INT actVersion | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.6 | INTEGER | read-only | actVersion. |
| U32 estimatedDistance | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.7 | Unsigned32 | read-only | The estimated distance to the ONT. |
| INT pppoeStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.8 | INTEGER | read-only | This item reports the PPPoE session status of the ONT. |
| STR modelVersion | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.9 | DisplayString | read-only | This item indicates the model version reported by ONU. |
| IP wanIp | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.10 | IpAddress | read-only | WAN IP address of this ONU. |
| INT upgradeStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.1.1.11 | INTEGER | read-only | The upgrade status of this ONU. 0. The upgrade status is idle. 1. The planned version of the ont and the action version of the ONT match. 2. The ONT start to download the FW. 3. The ONT upgraded the FW successes and reboot. 4. The ONT upgraded the FW failed. 5. The ONT upgraded the FW failed becaus ONT down. 6. Not found the matching image with the planned version. 7. The ONT is not set the planned version. 8. The ONT upgraded the FW failed because timeout. 9. The ONT status is not ready. 10. The FW upgrade waiting queue is full. 11. The ONT is downloading. 12. The ONT is already in waiting queue. 13. The ONT action version and the planned version mismatch. 14. Change to Image(1) and reboot. 15. Change to Image(2) and reboot. 16. No ONT image on the OLT. |
| ontBwGroupStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.3 | not-accessible | ||
| ontBwGroupStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.3.1 | not-accessible | An entry in ontBwGroupStatusTable | |
| INT ontBwGroupStatusAllocId | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.3.1.1 | INTEGER | read-only | This MIB reports the allocation ID assigned to this bandwidth group. |
| ontCountersTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4 | not-accessible | ontCountersTable | |
| ontCountersEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1 | not-accessible | An entry in ontCountersTable | |
| C32 ontCountersUnreceivedBursts | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.1 | Counter32 | read-only | Unreceived bursts. |
| C32 ontCountersPositiveDriftBits | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.2 | Counter32 | read-only | Positive drift (bits). |
| C32 ontCountersNegativeDriftBits | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.3 | Counter32 | read-only | Negative drift (bits). |
| C32 ontCountersBip8Errors | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.4 | Counter32 | read-only | Bip8 errors. |
| C32 ontCountersCorrectedBytes | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.5 | Counter32 | read-only | Corrected Bytes. |
| C32 ontCountersCorrectedCodewords | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.6 | Counter32 | read-only | Corrected Codewords. |
| C32 ontCountersUncorrctableCodewords | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.7 | Counter32 | read-only | Uncorrctable Codewords. |
| C32 ontCountersTotalReceivedCodewords | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.8 | Counter32 | read-only | Total received Codewords. |
| C32 ontCountersDsBer | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.9 | Counter32 | read-only | DS BER (REI). |
| C32 ontCountersBipByte | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.10 | Counter32 | read-only | Bip byte. |
| C32 ontCountersRxPloamCrcErrors | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.11 | Counter32 | read-only | Rx Ploam CrcErrors. |
| C32 ontCountersRxPloamNonidle | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.12 | Counter32 | read-only | Rx Ploam non idle. |
| C32 ontCountersRxOmciPacketCrcErrors | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.13 | Counter32 | read-only | Rx Omci Packet Crc Errors. |
| C32 ontCountersLcdgErrors | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.14 | Counter32 | read-only | Lcdg errors. |
| C32 ontCountersRdiErrors | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.15 | Counter32 | read-only | Rdi errors. |
| C32 ontCountersRxOmciPacket | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.4.1.16 | Counter32 | read-only | Rx Omci Packet. |
| ontWanStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5 | not-accessible | ||
| ontWanStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1 | not-accessible | An entry in ontWanStatusTable | |
| INT ontWanId | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.1 | INTEGER | not-accessible | ont wan Id |
| INT ontWanStatusEnable | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.2 | INTEGER | read-only | This MIB reports the wan status type. |
| INT ontWanStatusType | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.3 | INTEGER | read-only | This MIB reports the wan status type. |
| INT ontWanStatusLinkStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.4 | INTEGER | read-only | This MIB reports the wan status. |
| BIT ontWanStatusServiceType | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.5 | Bits | read-only | This MIB reports the wan status. |
| INT ontWanStatusVlan | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.6 | INTEGER | read-only | This MIB reports the wan vlan. |
| INT ontWanStatusPriority | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.7 | INTEGER | read-only | This MIB reports the wan proirity. |
| INT ontWanStatusIpMode | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.8 | INTEGER | read-only | This MIB reports the wan ip mode. |
| IP ontWanStatusIp | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.9 | IpAddress | read-only | This MIB reports the wan IP. |
| IP ontWanStatusMask | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.10 | IpAddress | read-only | This MIB reports the wan IP mask. |
| IP ontWanStatusGateway | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.11 | IpAddress | read-only | This MIB reports the wan IP gateway. |
| IP ontWanStatusPrimaryDns | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.12 | IpAddress | read-only | This MIB reports the wan primary dns. |
| IP ontWanStatusSecondDns | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.13 | IpAddress | read-only | This MIB reports the wan second dns. |
| INT ontWanStatusNat | 1.3.6.1.4.1.890.1.5.13.13.31.3.2.5.1.14 | INTEGER | read-only | This MIB reports the wan nat status. |
| ontCardStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.3 | not-accessible | ||
| ontCardStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1 | not-accessible | An entry in ontCardStatusTable | |
| REM status | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.1 | RemoteOnuStatus | read-only | ONT card status. |
| INT adminState | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.2 | INTEGER | read-only | adminState. |
| INT expectType | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.4 | INTEGER | read-only | expectType. |
| INT actualType | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.5 | INTEGER | read-only | actualType. |
| INT expectedPort | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.6 | INTEGER | read-only | expectedPort. |
| INT actualPort | 1.3.6.1.4.1.890.1.5.13.13.31.3.3.1.7 | INTEGER | read-only | actualPort. |
| ontDdmiStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.4 | not-accessible | ||
| ontDdmiStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1 | not-accessible | An entry in ontDdmiStatusTable | |
| STR voltage | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.1 | DisplayString | read-only | ONT Voltage (V). |
| STR rxPower | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.2 | DisplayString | read-only | ONT Rx power (dbm). |
| STR txPower | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.3 | DisplayString | read-only | ONT Tx power (db). |
| STR laserCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.4 | DisplayString | read-only | ONT Laser Bias current (uA). |
| STR ontTemperature | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.5 | DisplayString | read-only | ONT Temperature (C). |
| ENA ontDdmiRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.6 | EnabledStatus | read-write | |
| INT ontDdmiStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.4.1.7 | INTEGER | read-only | ontDdmiStatus. |
| ontEnetPmCounters | 1.3.6.1.4.1.890.1.5.13.13.31.3.5 | |||
| ontEnetCurrentPmCountersTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1 | not-accessible | ||
| ontEnetCurrentPmCountersEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1 | not-accessible | An entry in ontEnetPmCounters | |
| C64 ontEnetCurrentPmUsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.1 | Counter64 | read-only | ONT enet PM counters up stream octets. |
| C64 ontEnetCurrentPmUsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.2 | Counter64 | read-only | ONT enet PM counters up stream packets. |
| C64 ontEnetCurrentPmUsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.3 | Counter64 | read-only | ONT enet PM counters up stream mcast packets. |
| C64 ontEnetCurrentPmUsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.4 | Counter64 | read-only | ONT enet PM counters up stream bcast packets. |
| C64 ontEnetCurrentPmDsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.5 | Counter64 | read-only | ONT enet PM counters ds stream octets. |
| C64 ontEnetCurrentPmDsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.6 | Counter64 | read-only | ONT enet PM counters ds stream packets. |
| C64 ontEnetCurrentPmDsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.7 | Counter64 | read-only | ONT enet PM counters ds stream mcast packets. |
| C64 ontEnetCurrentPmDsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.8 | Counter64 | read-only | ONT enet PM counters ds stream bcast packets. |
| ENA ontEnetPmCountersGetCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.9 | EnabledStatus | read-write | |
| INT ontEnetPmCountersCheckGetCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.1.1.10 | INTEGER | read-only | |
| ontEnetLast15PmCountersTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2 | not-accessible | ||
| ontEnetLast15PmCountersEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1 | not-accessible | An entry in ontEnetPmCounters | |
| C64 ontEnetLast15PmUsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.1 | Counter64 | read-only | ONT enet PM counters up stream octets. |
| C64 ontEnetLast15PmUsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.2 | Counter64 | read-only | ONT enet PM counters up stream packets. |
| C64 ontEnetLast15PmUsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.3 | Counter64 | read-only | ONT enet PM counters up stream mcast packets. |
| C64 ontEnetLast15PmUsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.4 | Counter64 | read-only | ONT enet PM counters up stream bcast packets. |
| C64 ontEnetLast15PmDsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.5 | Counter64 | read-only | ONT enet PM counters ds stream octets. |
| C64 ontEnetLast15PmDsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.6 | Counter64 | read-only | ONT enet PM counters ds stream packets. |
| C64 ontEnetLast15PmDsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.7 | Counter64 | read-only | ONT enet PM counters ds stream mcast packets. |
| C64 ontEnetLast15PmDsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.8 | Counter64 | read-only | ONT enet PM counters ds stream bcast packets. |
| C32 ontEnetLast15PmInterval | 1.3.6.1.4.1.890.1.5.13.13.31.3.5.2.1.9 | Counter32 | read-only | ONT enet PM counters Interval. |
| ontEnetStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.6 | |||
| ontEnetStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.6.1 | not-accessible | ||
| ontEnetStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.6.1.1 | not-accessible | An entry in ontEnetStatus | |
| REM ontEnetPortStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.6.1.1.1 | RemoteOnuStatus | read-only | ONT enet ME provision status. |
| ontVenetPmCounters | 1.3.6.1.4.1.890.1.5.13.13.31.3.7 | |||
| ontVenetCurrentPmCountersTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1 | not-accessible | ||
| ontVenetCurrentPmCountersEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1 | not-accessible | An entry in ontVenetPmCounters | |
| C64 ontVenetCurrentPmUsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.1 | Counter64 | read-only | ONT venet PM counters Upstream Octets Cont. |
| C64 ontVenetCurrentPmUsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.2 | Counter64 | read-only | ONT venet PM counters Upstream Packets Count. |
| C64 ontVenetCurrentPmUsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.3 | Counter64 | read-only | ONT venet PM counters Upstream Multicast Packets Count. |
| C64 ontVenetCurrentPmUsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.4 | Counter64 | read-only | ONT venet PM counters Upstream Broadcast Packets Count. |
| C64 ontVenetCurrentPmDsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.5 | Counter64 | read-only | ONT venet PM counters Downstream Octets Cont. |
| C64 ontVenetCurrentPmDsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.6 | Counter64 | read-only | ONT venet PM counters Downstream Packets Count. |
| C64 ontVenetCurrentPmDsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.7 | Counter64 | read-only | ONT venet PM counters Downstream Multicast Packets Count. |
| C64 ontVenetCurrentPmDsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.8 | Counter64 | read-only | ONT venet PM counters Downstream Broadcast Packets Count. |
| ENA ontVenetPmCountersGetCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.9 | EnabledStatus | read-write | |
| INT ontVenetPmCountersCheckGetCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.1.1.10 | INTEGER | read-only | |
| ontVenetLast15PmCountersTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2 | not-accessible | ||
| ontVenetLast15PmCountersEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1 | not-accessible | An entry in ontVenetPmCounters | |
| C64 ontVenetLast15PmUsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.1 | Counter64 | read-only | ONT venet PM counters Upstream Octets Count. |
| C64 ontVenetLast15PmUsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.2 | Counter64 | read-only | ONT venet PM counters Upstream Packets Count. |
| C64 ontVenetLast15PmUsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.3 | Counter64 | read-only | ONT venet PM counters Upstream Multicast Packets Count. |
| C64 ontVenetLast15PmUsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.4 | Counter64 | read-only | ONT venet PM counters Upstream Broadcast Packets Count. |
| C64 ontVenetLast15PmDsOctets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.5 | Counter64 | read-only | ONT venet PM counters Downstream Octets Count. |
| C64 ontVenetLast15PmDsPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.6 | Counter64 | read-only | ONT venet PM counters Downstream Packets Count. |
| C64 ontVenetLast15PmDsMcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.7 | Counter64 | read-only | ONT venet PM counters Downstream Multicast Packets Count. |
| C64 ontVenetLast15PmDsBcastPackets | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.8 | Counter64 | read-only | ONT venet PM counters Downstream Broadcast Packets Count. |
| C32 ontVenetLast15PmInterval | 1.3.6.1.4.1.890.1.5.13.13.31.3.7.2.1.9 | Counter32 | read-only | ONT venet PM counters Interval. |
| ontVenetStatusInfo | 1.3.6.1.4.1.890.1.5.13.13.31.3.8 | |||
| ontVenetStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.8.1 | not-accessible | ||
| ontVenetStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.8.1.1 | not-accessible | An entry in ontVenetStatusInfo | |
| REM ontVenetStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.8.1.1.1 | RemoteOnuStatus | read-only | ONT Venet ME provision status. |
| ontPotsStatusInfo | 1.3.6.1.4.1.890.1.5.13.13.31.3.9 | |||
| ontPotsStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.9.1 | not-accessible | ||
| ontPotsStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.9.1.1 | not-accessible | An entry in ontPotsStatusInfo | |
| REM ontPotsStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.9.1.1.1 | RemoteOnuStatus | read-only | ONT Pots ME provision status. |
| ontUniportStatusInfo | 1.3.6.1.4.1.890.1.5.13.13.31.3.10 | |||
| uniportVlanStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.1 | not-accessible | ||
| uniportVlanStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.1.1 | not-accessible | An entry in uniportVlanStatusInfo | |
| REM uniportVlanStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.1.1.1 | RemoteOnuStatus | read-only | uniport VLAN ME provision status. |
| uniportFdbTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2 | not-accessible | ||
| uniportFdbEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1 | not-accessible | uniport fdb address table, following the content of OMCI MAC bridge port bridge table data ME. | |
| INT uniFdbIndex | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.1 | INTEGER | read-only | uniport fdb index. |
| MAC uniFdbMac | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.2 | MacAddress | read-only | uniport MAC address. |
| INT uniFdbAge | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.3 | INTEGER | read-only | uniport MAC aging time in seconds. |
| INT uniFdbDynamic | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.4 | INTEGER | read-only | uniport MAC address type, either dynamic or static. |
| INT uniFdbFilter | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.2.1.5 | INTEGER | read-only | uniport MAC filter type, either forward or filter. |
| uniportIgmpStatisticsTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3 | not-accessible | This table includes IGMP Channel statistics information | |
| uniportIgmpStatisticsEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1 | not-accessible | An entry in uniport Igmp Statistics Table | |
| INT uniportIgmpStatisticsUniVid | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.1 | INTEGER | read-only | UniVid |
| INT uniportIgmpStatisticsRxReportV1 | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.2 | INTEGER | read-only | RxReportV1 |
| INT uniportIgmpStatisticsRxReportV2 | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.3 | INTEGER | read-only | RxReportV2 |
| INT uniportIgmpStatisticsRxReportV3 | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.4 | INTEGER | read-only | RxReportV3 |
| INT uniportIgmpStatisticsRxLeave | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.5 | INTEGER | read-only | RxLeave |
| INT uniportIgmpStatisticsDropRate | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.6 | INTEGER | read-only | DropRate |
| INT uniportIgmpStatisticsDropOthers | 1.3.6.1.4.1.890.1.5.13.13.31.3.10.3.1.7 | INTEGER | read-only | DropOthers |
| ontVideoStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.11 | |||
| ontVideoStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.11.1 | not-accessible | ||
| ontVideoStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.11.1.1 | not-accessible | An entry in ontVideoStatus | |
| REM ontVideoPortStatus | 1.3.6.1.4.1.890.1.5.13.13.31.3.11.1.1.1 | RemoteOnuStatus | read-only | ontVideo provision status. |
| ontDdmiHistoryStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.3.12 | not-accessible | ||
| ontDdmiHistoryStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1 | not-accessible | An entry in ontDdmiHistoryStatusTable | |
| STR ontDdmiHistLast15Voltage | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.1 | DisplayString | read-only | ONT Voltage (V) in the last 15 minutes. |
| STR ontDdmiHistLast15RxPower | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.2 | DisplayString | read-only | ONT Rx power (dbm) in the last 15 minutes. |
| STR ontDdmiHistLast15TxPower | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.3 | DisplayString | read-only | ONT Tx power (db) in the last 15 minutes. |
| STR ontDdmiHistLast15LaserCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.4 | DisplayString | read-only | ONT Laser Bias current (uA) in the last 15 minutes. |
| STR ontDdmiHistLast15Temperature | 1.3.6.1.4.1.890.1.5.13.13.31.3.12.1.5 | DisplayString | read-only | ONT Temperature (C) in the last 15 minutes. |
| uniPortOpModeSetup | 1.3.6.1.4.1.890.1.5.13.13.31.8 | |||
| uniPortOpModePortTable | 1.3.6.1.4.1.890.1.5.13.13.31.8.1 | not-accessible | ||
| uniPortOpModePortEntry | 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1 | not-accessible | An entry in uniPortOpModePortTable. | |
| INT uniPortOpModePortVlanTranslation | 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1.1 | INTEGER | read-write | |
| INT uniPortOpModePortVlanXlateMissDrop | 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1.2 | INTEGER | read-write | |
| INT uniPortOpModePortEgrVlanXlateMissDrop | 1.3.6.1.4.1.890.1.5.13.13.31.8.1.1.3 | INTEGER | read-write | |
| transceiverInfo | 1.3.6.1.4.1.890.1.5.13.13.31.14 | |||
| transceiverSerialInfoTable | 1.3.6.1.4.1.890.1.5.13.13.31.14.1 | not-accessible | ||
| transceiverSerialInfoEntry | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1 | not-accessible | An entry in transceiverSerialInfoTable. | |
| INT transceiverSerialInfoEntryPort | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.1 | INTEGER | read-only | Index of transceiverSerialInfo. It is referred to ifIndex |
| INT transceiverSerialInfoEntryStatus | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.2 | INTEGER | read-only | Transceiver module status. 1:okWithDdm. 2:okWithoutDdm. 3:nonOperational |
| STR transceiverSerialInfoEntryVendor | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.3 | DisplayString | read-only | Transceiver module vendor name. |
| STR transceiverSerialInfoEntryPartNo | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.4 | DisplayString | read-only | Part number provided by transceiver module vendor. |
| STR transceiverSerialInfoEntrySerialNo | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.5 | DisplayString | read-only | Serial number provided by transceiver module vendor. |
| STR transceiverSerialInfoEntryRevision | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.6 | DisplayString | read-only | Revision level for part number provided by transceiver module vendor. |
| STR transceiverSerialInfoEntryDateCode | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.7 | DisplayString | read-only | Transceiver module vendor's manufacturing date code |
| STR transceiverSerialInfoEntryTransceiver | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.8 | DisplayString | read-only | Transceiver module type names |
| STR transceiverSerialInfoEntryCalibration | 1.3.6.1.4.1.890.1.5.13.13.31.14.1.1.9 | DisplayString | read-only | Transceiver module type calibration |
| transceiverDdmInfoTable | 1.3.6.1.4.1.890.1.5.13.13.31.14.2 | not-accessible | ||
| transceiverDdmInfoEntry | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1 | not-accessible | An entry in transceiverDdmInfoTable. | |
| INT transceiverDdmInfoEntryPort | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.1 | INTEGER | read-only | Index of transceiverDdmInfo. This will be referred to ifIndex |
| INT transceiverDdmInfoEntryType | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.2 | INTEGER | read-only | Transceiver DDM information type. 1: Temperature 2: Voltage 3: TX Bias 4: TX power 5: RX power |
| STR transceiverDdmInfoEntryAlarmMax | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.3 | DisplayString | read-only | Transceiver high alarm threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. |
| STR transceiverDdmInfoEntryAlarmMin | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.4 | DisplayString | read-only | Transceiver low alarm threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. |
| STR transceiverDdmInfoEntryWarnMax | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.5 | DisplayString | read-only | Transceiver high warn threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. |
| STR transceiverDdmInfoEntryWarnMin | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.6 | DisplayString | read-only | Transceiver low warn threshold. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. |
| STR transceiverDdmInfoEntryCurrent | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.7 | DisplayString | read-only | Transceiver current DDM value. The unit for temperature is C The unit for voltage is V The unit for TX bias is mA The unit for TX/RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. |
| STR transceiverDdmInfoEntryDescription | 1.3.6.1.4.1.890.1.5.13.13.31.14.2.1.8 | DisplayString | read-only | Transceiver DDM information description. Show N/A if transceiver DDM information is not available. |
| transceiverDdmInfoProfileTable | 1.3.6.1.4.1.890.1.5.13.13.31.14.3 | not-accessible | ||
| transceiverDdmInfoProfileEntry | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1 | not-accessible | An entry in transceiverDdmInfoProfileTable. | |
| INT transceiverDdmInfoProfilePort | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.1 | INTEGER | read-only | Index of transceiverDdmInfoProfile. This will be referred to ifIndex |
| INT transceiverDdmInfoProfileType | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.2 | INTEGER | read-only | Transceiver DDM information type. 1: Temperature 2: Voltage 3: TX Bias 4: TX power 5: RX power |
| STR transceiverDdmInfoProfileAlarmMax | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.3 | DisplayString | read-write | Transceiver high alarm threshold. The unit for temperature is 0.01C, value range The unit for voltage is 0.01V, value range The unit for TX bias is 0.01mA, value range The unit for TX power is 0.01dbm, value range The unit for RX power is 0.01dbm, value range The value N/A represents transceiver DDM information does not setting. |
| STR transceiverDdmInfoProfileAlarmMin | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.4 | DisplayString | read-write | Transceiver low alarm threshold. The unit for temperature is 0.01C, value range The unit for voltage is 0.01V, value range The unit for TX bias is 0.01mA, value range The unit for TX power is 0.01dbm, value range The unit for RX power is 0.01dbm, value range The value N/A represents transceiver DDM information does not setting. |
| STR transceiverDdmInfoProfileWarnMax | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.5 | DisplayString | read-write | Transceiver high warn threshold. The unit for temperature is 0.01C, value range The unit for voltage is 0.01V, value range The unit for TX bias is 0.01mA, value range The unit for TX power is 0.01dbm, value range The unit for RX power is 0.01dbm, value range The value N/A represents transceiver DDM information does not setting. |
| STR transceiverDdmInfoProfileWarnMin | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.6 | DisplayString | read-write | Transceiver low warn threshold. The unit for temperature is 0.01C, value range The unit for voltage is 0.01V, value range The unit for TX bias is 0.01mA, value range The unit for TX power is 0.01dbm, value range The unit for RX power is 0.01dbm, value range The value N/A represents transceiver DDM information does not setting. |
| STR transceiverDdmInfoProfileDescription | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.7 | DisplayString | read-only | Transceiver DDM information description. Show N/A if transceiver DDM information is not available. |
| ROW transceiverDdmInfoProfileRowstatus | 1.3.6.1.4.1.890.1.5.13.13.31.14.3.1.8 | RowStatus | read-create | Profile enabled/disabled status. |
| transceiverPerOntTable | 1.3.6.1.4.1.890.1.5.13.13.31.14.4 | not-accessible | Per ONT measure value on OLT GPON transceiver | |
| transceiverPerOntEntry | 1.3.6.1.4.1.890.1.5.13.13.31.14.4.1 | not-accessible | An entry in transceiverPerOntTable. | |
| INT transceiverPerOntNumber | 1.3.6.1.4.1.890.1.5.13.13.31.14.4.1.1 | INTEGER | not-accessible | transceiverPerOntNumber is the number of configuration. |
| STR transceiverPerOntRxPower | 1.3.6.1.4.1.890.1.5.13.13.31.14.4.1.2 | DisplayString | read-only | Transceiver high alarm threshold. The unit for RX power is dbm The value neg inf represents negative infinit(0mW) The value N/A represents not applicable. |
| multicastStatus | 1.3.6.1.4.1.890.1.5.13.13.31.15 | |||
| igmpchannelStatusTable | 1.3.6.1.4.1.890.1.5.13.13.31.15.1 | not-accessible | ||
| igmpchannelStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1 | not-accessible | IGMP channel status. | |
| INT igmpchannelStatusVlanID | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.1 | INTEGER | read-only | |
| INT igmpchannelStatusIfIndex | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.2 | INTEGER | read-only | |
| IPt igmpchannelStatusGroupAddressType | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.3 | InetAddressType | read-only | The address type of the igmpchannelStatusGroupAddress entry. |
| IP igmpchannelStatusGroupAddress | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.4 | InetAddress | read-only | |
| INT igmpchannelStatusGem | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.5 | INTEGER | read-only | |
| STR igmpchannelStatusPortAid | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.6 | DisplayString | read-only | |
| INT igmpchannelStatusUniVid | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.7 | INTEGER | read-only | |
| INT igmpchannelStatusGroupFilterMode | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.8 | INTEGER | read-only | The current cache state, applicable to MGMDv3-compatible nodes. The value indicates whether the state is INCLUDE or EXCLUDE. |
| STR igmpchannelStatusGroupUpTime | 1.3.6.1.4.1.890.1.5.13.13.31.15.1.1.9 | DisplayString | read-only | The value specifies the group up time of indicated multicast group. |
| igmpchannelClientSrcIpTable | 1.3.6.1.4.1.890.1.5.13.13.31.15.2 | not-accessible | ||
| igmpchannelClientSrcIpEntry | 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1 | not-accessible | An entry in igmpchannelClientSrcIpTable. | |
| INT igmpchannelClientSrcIpIndex | 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1.1 | INTEGER | read-only | |
| IPt igmpchannelClientSrcIpAddressType | 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1.2 | InetAddressType | read-only | |
| IP igmpchannelClientSrcIpAddress | 1.3.6.1.4.1.890.1.5.13.13.31.15.2.1.3 | InetAddress | read-only | |
| gponVlanTranslationSetup | 1.3.6.1.4.1.890.1.5.13.13.31.16 | |||
| gponVlanTranslationRuleTable | 1.3.6.1.4.1.890.1.5.13.13.31.16.1 | not-accessible | ||
| gponVlanTranslationRuleEntry | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1 | not-accessible | An entry in vlan-translation rule table | |
| STR gponVlanTranslationRuleName | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.1 | DisplayString | read-write | The name of vlan-translation entry |
| INT gponVlanTranslationRulePort | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.2 | INTEGER | read-only | interface port id |
| INT gponVlanTranslationRuleOuterVid | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.3 | INTEGER | read-only | outer vid. The range of VID is between 1 and 4094. 0 presents ignore this field |
| INT gponVlanTranslationRuleOuterPriority | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.4 | INTEGER | read-only | outer priority |
| INT gponVlanTranslationRuleInnerVid | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.5 | INTEGER | read-only | inner vid. The range of VID is between 1 and 4094. 0 presents ignore this field |
| INT gponVlanTranslationRuleInnerPriority | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.6 | INTEGER | read-only | inner priority |
| INT gponVlanTranslationRuleTransSVid | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.7 | INTEGER | read-write | translated Svid. The range of VID is between 1 and 4094. 0 presents ignore this field |
| INT gponVlanTranslationRuleSPriority | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.8 | INTEGER | read-write | S priority |
| INT gponVlanTranslationRuleTransCVid | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.9 | INTEGER | read-write | translated Cvid. The range of VID is between 1 and 4094. 0 presents ignore this field |
| INT gponVlanTranslationRuleCPriority | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.10 | INTEGER | read-write | C priority |
| INT gponVlanTranslationRuleN1Map | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.11 | INTEGER | read-write | N:1 mapping group id. 0 presents 1:1 map |
| ROW gponVlanTranslationRuleRowStatus | 1.3.6.1.4.1.890.1.5.13.13.31.16.1.1.12 | RowStatus | read-create | |
| port | 1.3.6.1.4.1.890.1.5.13.13.33 | |||
| subrPortTable | 1.3.6.1.4.1.890.1.5.13.13.33.1 | not-accessible | This table includes subscriber attributes for the port. | |
| subrPortEntry | 1.3.6.1.4.1.890.1.5.13.13.33.1.1 | not-accessible | An entry in subrPortTable. | |
| STR subrPortName | 1.3.6.1.4.1.890.1.5.13.13.33.1.1.1 | DisplayString | read-write | Name of the subscriber. |
| STR subrPortTel | 1.3.6.1.4.1.890.1.5.13.13.33.1.1.2 | DisplayString | read-write | TelNo. of the subscriber. |
| adslPort | 1.3.6.1.4.1.890.1.5.13.13.33.2 | |||
| adslLineStatusTable | 1.3.6.1.4.1.890.1.5.13.13.33.2.1 | not-accessible | This table includes the ADSL line status. | |
| adslLineStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.33.2.1.1 | not-accessible | An entry in adslLineStatusTable. | |
| STR adslLineStatusMode | 1.3.6.1.4.1.890.1.5.13.13.33.2.1.1.1 | DisplayString | read-only | The link up mode of the ADSL line. |
| STR adslLineStatusUpTime | 1.3.6.1.4.1.890.1.5.13.13.33.2.1.1.2 | DisplayString | read-only | The time since the ADSL line link up. format: |
| stp | 1.3.6.1.4.1.890.1.5.13.13.34 | |||
| INT stpEnable | 1.3.6.1.4.1.890.1.5.13.13.34.1 | INTEGER | read-write | Enable or disable the spanning tree protocol. |
| INT stpMode | 1.3.6.1.4.1.890.1.5.13.13.34.2 | INTEGER | read-write | Select the spanning mode is RSTP or MSTP. |
| mstp | 1.3.6.1.4.1.890.1.5.13.13.34.3 | |||
| INT mstpHelloTime | 1.3.6.1.4.1.890.1.5.13.13.34.3.1 | INTEGER | read-write | The value that all bridges use for HelloTime when this bridge is acting as the root. |
| INT mstpMaxAge | 1.3.6.1.4.1.890.1.5.13.13.34.3.2 | INTEGER | read-write | The value that all bridges use for MaxAge when this bridge is acting as the root. |
| INT mstpForwardDelay | 1.3.6.1.4.1.890.1.5.13.13.34.3.3 | INTEGER | read-write | The value that all bridges use for ForwardDelay when this bridge is acting as the root. |
| mstpVlanTable | 1.3.6.1.4.1.890.1.5.13.13.34.3.4 | not-accessible | This table contains one entry for each instance of MSTP. This table is supported by R1.02 and later versions. | |
| mstpVlanEntry | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1 | not-accessible | A conceptual row containing the status of the MSTP instance. | |
| INT mstpVlanIndex | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.1 | INTEGER | read-only | Uniquely identifies an instance. |
| OCT mstpVlans1k | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.2 | OCTET STRING | read-write | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 0 through 1023. The first octet corresponds to VLANs with VlanIndex values 0 through 7; the second octet to VLANs 8 through 15 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. |
| OCT mstpVlans2k | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.3 | OCTET STRING | read-write | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. |
| OCT mstpVlans3k | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.4 | OCTET STRING | read-write | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. |
| OCT mstpVlans4k | 1.3.6.1.4.1.890.1.5.13.13.34.3.4.1.5 | OCTET STRING | read-write | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that octet. For each VLAN that is mapped to this MSTP instance, the bit corresponding to that VLAN is set to '1'. |
| mstpInsTable | 1.3.6.1.4.1.890.1.5.13.13.34.3.5 | not-accessible | Port configuration for multiple spanning trees. | |
| mstpInsEntry | 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1 | not-accessible | An entry of mstpXstPortTable. | |
| INT mstpInsIndex | 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.1 | INTEGER | read-only | Identifies a spanning tree. |
| INT mstpInsPort | 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.2 | INTEGER | read-only | The port number of the port for which this entry contains MSTP management information. |
| INT mstpInsEnable | 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.3 | INTEGER | read-write | The enabled/disabled status of the port. |
| INT mstpInsPortPriority | 1.3.6.1.4.1.890.1.5.13.13.34.3.5.1.4 | INTEGER | read-write | In an MSTP Bridge, the Port's Port Priority parameter value for the MSTI, i.e. the priority field for the Port Identifier for the Port for the MSTI. |
| diagnostic | 1.3.6.1.4.1.890.1.5.13.13.35 | |||
| oamloopback | 1.3.6.1.4.1.890.1.5.13.13.35.1 | |||
| INT oamloopbackTarget | 1.3.6.1.4.1.890.1.5.13.13.35.1.1 | INTEGER | read-write | IfIndex of the port which would be performed oamloopback test. |
| INT oamloopbackOps | 1.3.6.1.4.1.890.1.5.13.13.35.1.2 | INTEGER | read-write | The manager sets value to 1 to start the oamloopback test and the agent clears the object to zero when oamloopback test is completed. |
| INT oamloopbackPacketNumber | 1.3.6.1.4.1.890.1.5.13.13.35.1.3 | INTEGER | read-write | Number of packets to be sent. 1~100000 |
| INT oamloopbackPacketSize | 1.3.6.1.4.1.890.1.5.13.13.35.1.4 | INTEGER | read-write | Size of each packet. 64~1518 |
| oamloopbackResult | 1.3.6.1.4.1.890.1.5.13.13.35.1.5 | |||
| INT oamloopbackRecvCnt | 1.3.6.1.4.1.890.1.5.13.13.35.1.5.1 | INTEGER | read-only | Number of packets received. |
| INT oamloopbackElapseTime | 1.3.6.1.4.1.890.1.5.13.13.35.1.5.2 | INTEGER | read-only | oamloopback test elapsed time. |
| INT oamloopbackErrorStatus | 1.3.6.1.4.1.890.1.5.13.13.35.1.5.3 | INTEGER | read-only | oamloopback test status. |
| oamSetup | 1.3.6.1.4.1.890.1.5.13.13.36 | |||
| oamPortTable | 1.3.6.1.4.1.890.1.5.13.13.36.1 | not-accessible | The table contains OAM (Operations, Administration, and Maintenance) port configuration. | |
| oamPortEntry | 1.3.6.1.4.1.890.1.5.13.13.36.1.1 | not-accessible | An entry contains OAM port configuration. | |
| BIT oamPortFunctionsSupported | 1.3.6.1.4.1.890.1.5.13.13.36.1.1.1 | Bits | read-write | The OAM functions supported on this Ethernet-like interface. OAM consists of separate functional sets beyond the basic discovery process that is always required. These functional groups can be supported independently by any implementation. These values are communicated to the peer via the local configuration field of Information OAMPDUs. Setting 'unidirectionalSupport(0)' indicates that the OA entity supports the transmission of OAMPDUs on links that are operating in unidirectional mode (traffic flowing in one direction only). Setting 'loopbackSupport(1)' indicates that the OAM entity can initiate and respond to loopback commands. Setting 'eventSupport(2)' indicates that the OAM entity can send and receive Event Notification OAMPDUs. Setting 'variableSupport(3)' indicates that the OAM entity can send and receive Variable Request and Response OAMPDUs. |
| zyxelLldp | 1.3.6.1.4.1.890.1.5.13.13.37 | |||
| zyxelLldpSetup | 1.3.6.1.4.1.890.1.5.13.13.37.1 | |||
| ENA zyLldpState | 1.3.6.1.4.1.890.1.5.13.13.37.1.1 | EnabledStatus | read-write | Enable/Disable LLDP on the switch. The Link Layer Discover Protocol (LLDP) is to discover and make available physical topology information for network management. This protocol will advertise information useful for discovering pertinent information about a remote port and to populate topology MIB. |
| STR zyLldpLastUpdatedTime | 1.3.6.1.4.1.890.1.5.13.13.37.1.2 | DisplayString | read-only | Last updated time (Y-M-D hh:mm:ss). |
| zyLldpConfigTable | 1.3.6.1.4.1.890.1.5.13.13.37.1.3 | not-accessible | ||
| zyLldpConfigEntry | 1.3.6.1.4.1.890.1.5.13.13.37.1.3.1 | not-accessible | ||
| OCT zyLldpConfigManAddrPortsTxEnable | 1.3.6.1.4.1.890.1.5.13.13.37.1.3.1.1 | OCTET STRING | read-write | A set of ports that are identified by a PortList, in which each port is represented as a bit. The corresponding local system management address instance will be transmitted on the member ports of the lldpManAddrPortsTxEnable. The default value for lldpConfigManAddrPortsTxEnable object is empty binary string, which means no ports are specified for advertising indicated management address instance. |
| zyLldpClearTable | 1.3.6.1.4.1.890.1.5.13.13.37.1.4 | not-accessible | ||
| zyLldpClearEntry | 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1 | not-accessible | ||
| ENA zyLldpRemoteInfoClear | 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1.1 | EnabledStatus | read-write | Clear all the LLDP remote information. |
| POR zyLldpRemoteInfoClearPorts | 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1.2 | PortList | read-write | Clear the LLDP remote informationof of the port(s). |
| ENA zyLldpStatisticsClear | 1.3.6.1.4.1.890.1.5.13.13.37.1.4.1.3 | EnabledStatus | read-write | Clear all the LLDP statistics. |
| zyxelLldpStatus | 1.3.6.1.4.1.890.1.5.13.13.37.2 | |||
| zyLldpStatsTable | 1.3.6.1.4.1.890.1.5.13.13.37.2.4 | not-accessible | ||
| zyLldpStatsEntry | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1 | not-accessible | ||
| STR zyLldpStatsRemTablesLastChangeTime | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.1 | DisplayString | read-only | Last updated time (Y-M-D hh:mm:ss). |
| C32 zyLldpStatsRemTablesInserts | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.2 | Counter32 | read-only | The number of times the complete set of information advertised by a particular MSAP has been inserted into tables contained in lldpRemoteSystemsData and lldpExtensions objects. The complete set of information received from a particular MSAP should be inserted into related tables. If partial information cannot be inserted for a reason such as lack of resources, all of the complete set of information should be removed. This counter should be incremented only once after the complete set of information is successfully recorded in all related tables. Any failures during inserting information set which result in deletion of previously inserted information should not trigger any changes in lldpStatsRemTablesInserts since the insert is not completed yet or or in lldpStatsRemTablesDeletes, since the deletion would only be a partial deletion. If the failure was the result of lack of resources, the lldpStatsRemTablesDrops counter should be incremented once. |
| C32 zyLldpStatsRemTablesDeletes | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.3 | Counter32 | read-only | The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects. This counter should be incremented only once when the complete set of information is completely deleted from all related tables. Partial deletions, such as deletion of rows associated with a particular MSAP from some tables, but not from all tables are not allowed, thus should not change the value of this counter. |
| C32 zyLldpStatsRemTablesDrops | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.4 | Counter32 | read-only | The number of times the complete set of information advertised by a particular MSAP could not be entered into tables contained in lldpRemoteSystemsData and lldpExtensions objects because of insufficient resources. |
| C32 zyLldpStatsRemTablesAgeouts | 1.3.6.1.4.1.890.1.5.13.13.37.2.4.1.5 | Counter32 | read-only | The number of times the complete set of information advertised by a particular MSAP has been deleted from tables contained in lldpRemoteSystemsData and lldpExtensions objects because the information timeliness interval has expired. This counter should be incremented only once when the complete set of information is completely invalidated (aged out) from all related tables. Partial aging, similar to deletion case, is not allowed, and thus, should not change the value of this counter. |
| INT zyLldpSlotNum | 1.3.6.1.4.1.890.1.5.13.13.37.3 | INTEGER | read-only | slot number |
| hostprotect | 1.3.6.1.4.1.890.1.5.13.13.38 | |||
| hostprotectConfig | 1.3.6.1.4.1.890.1.5.13.13.38.1 | |||
| hostprotectConfigTable | 1.3.6.1.4.1.890.1.5.13.13.38.1.1 | not-accessible | ||
| hostprotectConfigEntry | 1.3.6.1.4.1.890.1.5.13.13.38.1.1.1 | not-accessible | ||
| INT hostprotectProtocol | 1.3.6.1.4.1.890.1.5.13.13.38.1.1.1.1 | INTEGER | read-only | |
| INT hostprotectRatelimit | 1.3.6.1.4.1.890.1.5.13.13.38.1.1.1.2 | INTEGER | read-write | Rate-limit Setting: 10~500 pps (0 : No limit) |
| hostprotectStatistic | 1.3.6.1.4.1.890.1.5.13.13.38.2 | |||
| hostprotectStatisticTable | 1.3.6.1.4.1.890.1.5.13.13.38.2.1 | not-accessible | ||
| hostprotectStatisticEntry | 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1 | not-accessible | ||
| INT hostprotectStatisticProtocol | 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1.1 | INTEGER | read-only | |
| C32 hostprotectStatisticRxPkt | 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1.2 | Counter32 | read-write | |
| C32 hostprotectStatisticRxDrop | 1.3.6.1.4.1.890.1.5.13.13.38.2.1.1.3 | Counter32 | read-write | |
| INT hostprotectClear | 1.3.6.1.4.1.890.1.5.13.13.38.2.2 | INTEGER | read-write | Set 1 to clear all host protection statistic |
| erpsSetup | 1.3.6.1.4.1.890.1.5.13.13.39 | |||
| ENA erpsState | 1.3.6.1.4.1.890.1.5.13.13.39.1 | EnabledStatus | read-write | |
| erpsRingTable | 1.3.6.1.4.1.890.1.5.13.13.39.2 | not-accessible | ||
| erpsRingEntry | 1.3.6.1.4.1.890.1.5.13.13.39.2.1 | not-accessible | An entry in erpsRingTable. | |
| INT erpsPort0 | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.1 | INTEGER | read-write | Erps ring port0. |
| INT erpsPort1 | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.2 | INTEGER | read-write | Erps ring port1. |
| INT erpsRingId | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.3 | INTEGER | read-write | Erps ring Id. |
| STR erpsCcmPort0GroupName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.4 | DisplayString | read-write | Erps ring port0 ccm group name. |
| INT erpsCcmPort0Level | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.5 | INTEGER | read-write | Erps ring port0 ccm levle. |
| INT erpsCcmPort0Vlan | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.6 | INTEGER | read-write | Erps ring port0 ccm vlan. |
| INT erpsCcmPort0TxName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.7 | INTEGER | read-write | Erps ring port0 ccm tx name. |
| INT erpsCcmPort0Period | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.8 | INTEGER | read-write | Erps ring port0 ccm period. |
| INT erpsCcmPort0Priority | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.9 | INTEGER | read-write | Erps ring port0 ccm priority. |
| INT erpsCcmPort0RxName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.10 | INTEGER | read-write | Erps ring port 0 ccm rx name. |
| STR erpsCcmPort1GroupName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.11 | DisplayString | read-write | Erps ring port1 ccm group name. |
| INT erpsCcmPort1Level | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.12 | INTEGER | read-write | Erps ring port1 ccm levle. |
| INT erpsCcmPort1Vlan | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.13 | INTEGER | read-write | Erps ring port1 ccm vlan. |
| INT erpsCcmPort1TxName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.14 | INTEGER | read-write | Erps ring port1 ccm tx name. |
| INT erpsCcmPort1Period | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.15 | INTEGER | read-write | Erps ring port1 ccm period. |
| INT erpsCcmPort1Priority | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.16 | INTEGER | read-write | Erps ring port1 ccm priority. |
| INT erpsCcmPort1RxName | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.17 | INTEGER | read-write | Erps ring port1 ccm rx name. |
| INT erpsRapsPort0Vlan | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.18 | INTEGER | read-write | Erps ring port0 raps vlan. |
| INT erpsRapsPort0priority | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.19 | INTEGER | read-write | Erps ring port0 raps priority. |
| INT erpsRapsPort0Level | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.20 | INTEGER | read-write | Erps ring port0 rap level. |
| INT erpsRapsPort1Vlan | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.21 | INTEGER | read-write | Erps ring port1 raps vlan. |
| INT erpsRapsPort1priority | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.22 | INTEGER | read-write | Erps ring port1 raps priority. |
| INT erpsRapsPort1Level | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.23 | INTEGER | read-write | Erps ring port1 raps level. |
| ENA erpsRevertiveMode | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.24 | EnabledStatus | read-write | Erps ring RevertiveMode enable/disable. |
| INT erpsWtr | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.25 | INTEGER | read-write | Erps ring WTR. |
| INT erpsRplOwner | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.26 | INTEGER | read-write | Erps ring owner port. |
| INT erpsRplNeighbour | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.27 | INTEGER | read-write | Erps ring neighbour port. |
| INT erpsTunnelPort | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.28 | INTEGER | read-write | Erps ring tunnel port. |
| ROW erpsRingRowStatus | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.29 | RowStatus | read-create | Erps ring enable/disable. |
| INT erpsRingPort0CcmStatus | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.30 | INTEGER | read-only | Erps ring ccm port0 status. |
| INT erpsRingPort1CcmStatus | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.31 | INTEGER | read-only | Erps ring ccm port1 status. |
| INT erpsRingPort0Status | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.32 | INTEGER | read-only | Erps ring port0 status. |
| INT erpsRingPort1Status | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.33 | INTEGER | read-only | Erps ring port1 status. |
| INT erpsRingIndex | 1.3.6.1.4.1.890.1.5.13.13.39.2.1.34 | INTEGER | read-only | Erps ring index. |
| errdis | 1.3.6.1.4.1.890.1.5.13.13.40 | |||
| INT errdisReason | 1.3.6.1.4.1.890.1.5.13.13.40.1 | INTEGER | read-only | Cause reason, Plz refer errdisReasonName for protocol name |
| STR errdisReasonName | 1.3.6.1.4.1.890.1.5.13.13.40.2 | DisplayString | read-only | Cause reason name |
| errdisRecoveryReasonTable | 1.3.6.1.4.1.890.1.5.13.13.40.3 | not-accessible | ||
| errdisRecoveryReasonEntry | 1.3.6.1.4.1.890.1.5.13.13.40.3.1 | not-accessible | ||
| INT errdisRecoveryReasonActive | 1.3.6.1.4.1.890.1.5.13.13.40.3.1.1 | INTEGER | read-write | |
| INT errdisRecoveryReasonInterval | 1.3.6.1.4.1.890.1.5.13.13.40.3.1.2 | INTEGER | read-write | |
| errdisDetectReasonTable | 1.3.6.1.4.1.890.1.5.13.13.40.4 | not-accessible | ||
| errdisDetectReasonEntry | 1.3.6.1.4.1.890.1.5.13.13.40.4.1 | not-accessible | An entry in errdisDetectReasonTable. | |
| ENA errdisDetectReasonEnable | 1.3.6.1.4.1.890.1.5.13.13.40.4.1.1 | EnabledStatus | read-write | |
| INT errdisDetectReasonMode | 1.3.6.1.4.1.890.1.5.13.13.40.4.1.2 | INTEGER | read-write | |
| INT errdisDetectUpperbound | 1.3.6.1.4.1.890.1.5.13.13.40.4.1.3 | INTEGER | read-write | minimum scale is 8 pkt/s |
| errdisPortTable | 1.3.6.1.4.1.890.1.5.13.13.40.5 | not-accessible | Genni Configure. | |
| errdisPortEntry | 1.3.6.1.4.1.890.1.5.13.13.40.5.1 | not-accessible | ||
| INT errdisPortThreshold | 1.3.6.1.4.1.890.1.5.13.13.40.5.1.1 | INTEGER | read-write | Detect Threshold |
| errdisStatusTable | 1.3.6.1.4.1.890.1.5.13.13.40.6 | not-accessible | ||
| errdisStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.40.6.1 | not-accessible | An entry in errdisStatusTable. | |
| INT errdisStatusIfindex | 1.3.6.1.4.1.890.1.5.13.13.40.6.1.1 | INTEGER | read-only | |
| INT errdisStatusReason | 1.3.6.1.4.1.890.1.5.13.13.40.6.1.2 | INTEGER | read-only | |
| INT errdisStatusDetectMode | 1.3.6.1.4.1.890.1.5.13.13.40.6.1.3 | INTEGER | read-only | |
| STR errdisStatusDetectTime | 1.3.6.1.4.1.890.1.5.13.13.40.6.1.4 | DisplayString | read-only | |
| INT errdisStatusRecoveryTimeleft | 1.3.6.1.4.1.890.1.5.13.13.40.6.1.5 | INTEGER | read-only | Time left for recovery (secs). When recovery is inactive, it would be zero. |
| errdisClear | 1.3.6.1.4.1.890.1.5.13.13.40.7 | |||
| ENA errdisClearDetected | 1.3.6.1.4.1.890.1.5.13.13.40.7.1 | EnabledStatus | read-write | Clear all detected. |
| POR errdisClearDetectedPorts | 1.3.6.1.4.1.890.1.5.13.13.40.7.2 | PortList | read-write | Clear the detected status by port(s). |
| INT errdisClearDetectedReason | 1.3.6.1.4.1.890.1.5.13.13.40.7.3 | INTEGER | read-write | Clear the detected status by reason. |
| POR errdisClearStatisticPorts | 1.3.6.1.4.1.890.1.5.13.13.40.7.4 | PortList | read-write | Clear the statistic by port(s). |
| errdisTrapNotifications | 1.3.6.1.4.1.890.1.5.13.13.40.8 | |||
| NTF errdisTrap | 1.3.6.1.4.1.890.1.5.13.13.40.8.1 | |||
| NTF errdisTrapType | 1.3.6.1.4.1.890.1.5.13.13.40.8.2 | Display trap type | ||
| errdisStatisticTable | 1.3.6.1.4.1.890.1.5.13.13.40.9 | not-accessible | ||
| errdisStatisticEntry | 1.3.6.1.4.1.890.1.5.13.13.40.9.1 | not-accessible | An entry in errdisStatisticTable. | |
| INT errdisStatisticIfindex | 1.3.6.1.4.1.890.1.5.13.13.40.9.1.1 | INTEGER | read-only | |
| INT errdisStatisticReason | 1.3.6.1.4.1.890.1.5.13.13.40.9.1.2 | INTEGER | read-only | |
| INT errdisStatisticDetected | 1.3.6.1.4.1.890.1.5.13.13.40.9.1.3 | INTEGER | read-only | |
| INT errdisStatisticRecovery | 1.3.6.1.4.1.890.1.5.13.13.40.9.1.4 | INTEGER | read-only | |
| protectswitch | 1.3.6.1.4.1.890.1.5.13.13.41 | |||
| protectswitchConfigTable | 1.3.6.1.4.1.890.1.5.13.13.41.1 | not-accessible | The table contains protect switch configuration. | |
| protectswitchConfigEntry | 1.3.6.1.4.1.890.1.5.13.13.41.1.1 | not-accessible | ||
| INT protectswitchGroupId | 1.3.6.1.4.1.890.1.5.13.13.41.1.1.1 | INTEGER | read-only | Group ID of protectswitch function. |
| POR protectswitchMemberPort | 1.3.6.1.4.1.890.1.5.13.13.41.1.1.2 | PortList | read-write | Member ports of the protect switch function. |
| INT protectswitchPreemptMode | 1.3.6.1.4.1.890.1.5.13.13.41.1.1.3 | INTEGER | read-write | Preempt mode of the protect switch function. |
| INT protectswitchPreemptDelay | 1.3.6.1.4.1.890.1.5.13.13.41.1.1.4 | INTEGER | read-write | preempt delay time of the protect switch function. |
| protectswitchStatusTable | 1.3.6.1.4.1.890.1.5.13.13.41.2 | not-accessible | The table contains protect switch status. | |
| protectswitchStatusEntry | 1.3.6.1.4.1.890.1.5.13.13.41.2.1 | not-accessible | ||
| INT groupId | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.1 | INTEGER | read-only | Group ID of protectswitch function. |
| STR activePort | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.2 | DisplayString | read-only | Active port of the protect switch function. |
| STR backupPort | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.3 | DisplayString | read-only | Backup port of the protect switch function. |
| STR activePortStatus | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.4 | DisplayString | read-only | Active port status of the protect switch function. |
| STR backupPortStatus | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.5 | DisplayString | read-only | Backup port status of the protect switch function. |
| STR activePortState | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.6 | DisplayString | read-only | Active port state of the protect switch function. |
| STR backupPortState | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.7 | DisplayString | read-only | Backup port state of the protect switch function. |
| STR activePortBandwidth | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.8 | DisplayString | read-only | Active port bandwidth of the protect switch function. |
| STR backupPortBandwidth | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.9 | DisplayString | read-only | Backup port bandwidth of the protect switch function. |
| POR activePortTrunkingMember | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.10 | PortList | read-only | Active port trunking member of the protect switch function. |
| POR backupPortTrunkingMember | 1.3.6.1.4.1.890.1.5.13.13.41.2.1.11 | PortList | read-only | Backup port trunking member of the protect switch function. |
RFC description
IES5206 edge switch MIB for monitoring DSL/xDSL interfaces, VLAN, and bridge configuration.
Start monitoring ZyXEL IES5206/5212/6217 DSLAM/access switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.