IBMNETU-MIB

All MIBs › IBMNETU-MIB

Category: Domain: Server/Host Monitoring, Vendor: IBM

Description: IBM MIB for the NetVista U (NetU) workstation providing hardware inventory and management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is IBMNETU-MIB?

IBMNETU-MIB is an IBM enterprise MIB for the NetVista U ("NetU") thin-client workstation, providing hardware inventory and management objects for the device's internal expansion hardware. It exposes tables describing installed PCI adapters and graphics adapters, including slot number, adapter type, operational status, and (for graphics) port number and associated ifIndex. Its monitoring focus is hardware status: an administrator can confirm which PCI and graphics adapters are physically present in a NetVista U unit and check their operational status, catching a failed or missing adapter card. It is a self-contained vendor hardware-inventory MIB with a link to standard IF-MIB via the graphics adapter's ifIndex reference. It is deployed on IBM NetVista U desktop/thin-client workstations in enterprise desktop management environments. Engineers can download the IBMNETU-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in IBMNETU-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

IBM NetVista U workstation/thin client

Monitoring Examples

An administrator would poll ibmnetuPCIAdapTable / ibmnetuPCIAdapEntry, keyed by ibmnetuPCIAdapSlotNum, to read ibmnetuPCIAdapType and ibmnetuPCIAdapOperStatus, confirming an expected adapter card in a given slot is operating normally. Checking ibmnetuGraphicTable's ibmnetuGraphicSlotNum, ibmnetuGraphicPortNum, and ibmnetuGraphicifIndex ties a graphics adapter's port to its corresponding network/interface index for cross-referencing with IF-MIB. An ibmnetuPCIAdapOperStatus reporting a fault state for a slot that previously reported normal would indicate a failed PCI adapter card in that workstation.

What Can Be Monitored

PCI adapter slot occupancy
PCI adapter type
PCI adapter operational status
graphics adapter slot/port
graphics adapter interface index

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
ibm	1.3.6.1.4.1.2
ibmProd	1.3.6.1.4.1.2.6
ibmnetu	1.3.6.1.4.1.2.6.150
ibmnetuadmin	1.3.6.1.4.1.2.6.150.1
ibmnetuadminproducts	1.3.6.1.4.1.2.6.150.1.1
ibmnetumod400	1.3.6.1.4.1.2.6.150.1.1.1
ibmnetuadminOID	1.3.6.1.4.1.2.6.150.1.2
ibmnetuEnetChipSet	1.3.6.1.4.1.2.6.150.1.2.1
enetChipSetToshiba	1.3.6.1.4.1.2.6.150.1.2.1.1
enetChipSetAMD	1.3.6.1.4.1.2.6.150.1.2.1.2
ibmnetuadminDebug	1.3.6.1.4.1.2.6.150.1.3
ibmnetusystem	1.3.6.1.4.1.2.6.150.2
ibmnetusystemInfo	1.3.6.1.4.1.2.6.150.2.1
ibmnetucfgInfo	1.3.6.1.4.1.2.6.150.2.2
ibmnetuhardware	1.3.6.1.4.1.2.6.150.3
ibmnetuhardwareGeneral	1.3.6.1.4.1.2.6.150.3.1
ibmnetuPCIAdapTable	1.3.6.1.4.1.2.6.150.3.1.1		not-accessible	A table of information about PCI adapters in this box.
ibmnetuPCIAdapEntry	1.3.6.1.4.1.2.6.150.3.1.1.1		not-accessible	An entry containing objects to describe the adapter in a given slot.
INT ibmnetuPCIAdapSlotNum	1.3.6.1.4.1.2.6.150.3.1.1.1.1	INTEGER	read-only	The number identifying a slot location where an adapter can be inserted.
INT ibmnetuPCIAdapType	1.3.6.1.4.1.2.6.150.3.1.1.1.2	INTEGER	read-only	The type of adapter that is inserted into this slot. If no adapter is present, the variable will take the value not-present(2). The enumerations marked reserved# are saved for future enhancements.
INT ibmnetuPCIAdapOperStatus	1.3.6.1.4.1.2.6.150.3.1.1.1.3	INTEGER	read-only	The operational status of this PCI adapter. unknown (1) : If there was problem determining the operational status of the adapter. not-configured (2) : If the adapter inserted in the slot is recognized but no router configuration exists. not-present (3) : If no adapter is currently inserted. does-not-apply (4) : If this adapter does not contain an operational state. enable-pending (5) : If commands have been issued to enable the adapter but have not been completed. enabled (6) : If commands have been successfully issued to enable the adapter. disable-pending (7) : If commands have been issued to disable the adapter but have not been completed. disabled (8) : If commands have been successfully issued to disable the adapter. not-initialized (9) : If the adapter has not completed its initialization. unknown-device (10) : If the adapter inserted in the slot can not be recognized. hardware-error (11) : If the adapter can not be used nor made ready to be used. not-powered (12) : If the adapter has had a problem obtaining power from its slot. diagnostics (13) : If the adapter is currently undergoing diagnostics. wrs-available (14) : If the adapter is currently configured and available for WAN restoral. mis-configured (15) : If the adapter is inserted in the slot but the router configuration is of a different type.
ibmnetuGraphicTable	1.3.6.1.4.1.2.6.150.3.1.2		not-accessible	A table of information mapping a slot and port to an interface table ifIndex. An entry exists in this table only if the ifConnectorPresent object is true
ibmnetuGraphicEntry	1.3.6.1.4.1.2.6.150.3.1.2.1		not-accessible	An entry mapping slot and port to an interface table ifIndex.
INT ibmnetuGraphicSlotNum	1.3.6.1.4.1.2.6.150.3.1.2.1.1	INTEGER	read-only	The number identifying a slot location where an adapter can be inserted.
INT ibmnetuGraphicPortNum	1.3.6.1.4.1.2.6.150.3.1.2.1.2	INTEGER	read-only	The number identifying a port on a given adapter. A port implies a physical connector is associated with it.
INT ibmnetuGraphicifIndex	1.3.6.1.4.1.2.6.150.3.1.2.1.3	INTEGER	read-only	The ifIndex of the interface table entry associated with this port on an adapter. By definition, the ifEntry has ifConnectorPresent = true.
ibmnetuhardware400Specific	1.3.6.1.4.1.2.6.150.3.2
ibmneturouting	1.3.6.1.4.1.2.6.150.4
ibmnetuswitching	1.3.6.1.4.1.2.6.150.5

RFC description

Enterprise-specific MIB defining management objects for IBM Network Utility products across hardware, routing, and switching domains.

Start monitoring IBM NetVista U workstation/thin client with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download IBMNETU-MIB

What Is IBMNETU-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description