All MIBs › I2000-V2
Organization: iMAP
Last Updated: 2006-10-05
Description: I2000-V2 module
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is I2000-V2?
I2000-V2 is a private MIB defining the managed objects exposed through an NMS platform's SNMP Northbound Interface (NBI), so upstream OSS/NMS systems can retrieve management data via a standard SNMP interface rather than a proprietary API. Because it functions as an NBI abstraction layer, its content is expected to mirror underlying network-element status, alarms, and configuration data rather than exposing raw hardware sensors of its own. In practice this kind of MIB is used to surface aggregated software/system status, such as element reachability and alarm/fault summaries, so a higher-level manager-of-managers can poll one consistent interface across many devices. No module-dependency information or explicit object names were provided in the source material, so its detailed object structure cannot be confirmed from this data alone. It would typically be deployed in a network operations center integrating a vendor NMS platform with a broader multi-vendor SNMP-based OSS. Engineers can download the I2000-V2 file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in I2000-V2. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- network management system (NMS) northbound interface platform
Monitoring Examples
No object names were provided for this module, so a concrete polling scenario cannot be described from the available data; per its stated purpose, it defines the managed objects used by an NMS's SNMP Northbound Interface to expose underlying network-management data to upstream systems.
What Can Be Monitored
- network element alarm summary
- device reachability status
- NBI-exposed configuration state
This MIB depends on
Related MIBs
Imported Objects
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| enterprises |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| iMAP | 1.3.6.1.4.1.2011 | This MIB defines the managed objects that are used by the function interfaces of the SNMP Northbound Interface. | ||
| products | 1.3.6.1.4.1.2011.2 | |||
| iMAPNetManagement | 1.3.6.1.4.1.2011.2.15 | |||
| iMAPNorthbound | 1.3.6.1.4.1.2011.2.15.2 | |||
| iMAPNorthboundCommon | 1.3.6.1.4.1.2011.2.15.2.1 | |||
| iMAPNorthboundEventMgmt | 1.3.6.1.4.1.2011.2.15.2.1.2 | |||
| iMAPNorthboundNotificationReport | 1.3.6.1.4.1.2011.2.15.2.1.2.1 | |||
| iMAPNorthboundNotificationCommon | 1.3.6.1.4.1.2011.2.15.2.1.2.1.1 | |||
| iMAPNorthboundHeartbeatNotification | 1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1 | |||
| iMAPNorthboundHeartbeatNotificationV2 | 1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.0 | Root node for the converted TRAP-TYPEs. It contains the Heartbeat Notification Trap | ||
| NTF iMAPNorthboundHeartbeatNotificationType | 1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.0.5 | The iMAP sends the heartbeat notification trap to the NMS regularly each period. If the NMS receives the trap, the connection between the NMS and the iMAP works. If not, the connection fails. | ||
| OCT iMAPNorthboundHeartbeatSystemLabel | 1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.1 | OCTET STRING | read-only | Managed system ID: indicates the managed system from which the heartbeat notification is reported. It uniquely identifies one EMS. |
| I32 iMAPNorthboundHeartbeatPeriod | 1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.2 | Integer32 | read-only | Heartbeat period (must be between 3 and 300), in seconds |
| OCT iMAPNorthboundHeartbeatTimeStamp | 1.3.6.1.4.1.2011.2.15.2.1.2.1.1.1.3 | OCTET STRING | read-only | Time stamp: the time when the heartbeat notification is generated |
| iMAPNorthboundCommuLinkMonitor | 1.3.6.1.4.1.2011.2.15.2.1.3 | |||
| iMAPNorthboundHeartbeatSvc | 1.3.6.1.4.1.2011.2.15.2.1.3.1 | |||
| I32 iMAPNorthboundHeartbeatSvcReportInterval | 1.3.6.1.4.1.2011.2.15.2.1.3.1.1 | Integer32 | read-write | Accepts integral values in the range 3-300 (both end inclusive) Sets heartbeat interval to the value supplied. A heart beat is sent immediately consisting of changed interval. Attempt to set with invalid value results in error. |
| iMAPNorthboundFault | 1.3.6.1.4.1.2011.2.15.2.4 | |||
| iMAPNorthboundFaultQuery | 1.3.6.1.4.1.2011.2.15.2.4.1 | |||
| OCT iMAPNorthboundAlarmQuery | 1.3.6.1.4.1.2011.2.15.2.4.1.5 | OCTET STRING | read-write | Accepts only values 0 and 1 (single character) Attempt to set any other value returns error 1-> starts query active alarm process (if previous query alarm process is in progress then error is returned) 0-> stops the previous query active alarm process in progress (if any) |
| iMAPNorthboundFaultNotification | 1.3.6.1.4.1.2011.2.15.2.4.3 | |||
| iMAPNorthboundFaultAlarmNotification | 1.3.6.1.4.1.2011.2.15.2.4.3.3 | |||
| iMAPNorthboundFaultAlarmNotificationV2 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.0 | Root node for the converted TRAP-TYPEs. It contains the Fault Alarm Traps for sending real-time alarms to NMS | ||
| NTF iMAPNorthboundFaultAlarmReportNotificationType | 1.3.6.1.4.1.2011.2.15.2.4.3.3.0.1 | The iMAP system sends real-time alarms to the NMS using this trap. If an alarm occurs to an NE or the iMAP, the iMAP sends the alarm trap to the NMS. | ||
| NTF iMAPNorthboundFaultAlarmQueryBeginNotificationType | 1.3.6.1.4.1.2011.2.15.2.4.3.3.0.2 | The iMAP notifies the NMS of the start of the query. After the NMS receives the active alarm query start trap, the query starts. The trap is triggered by NMS for alarm query. | ||
| NTF iMAPNorthboundFaultAlarmQueryNotificationType | 1.3.6.1.4.1.2011.2.15.2.4.3.3.0.3 | The iMAP system sends queried alarms to the NMS using this trap. | ||
| NTF iMAPNorthboundFaultAlarmQueryEndNotificationType | 1.3.6.1.4.1.2011.2.15.2.4.3.3.0.4 | The iMAP notifies the NMS of the stop of the query. After the NMS receives the active alarm query stop trap, it indicates that the query ends. The NMS triggers the stop of the query, or the query ends after the NMS receives the active alarms. | ||
| OCT iMAPNorthboundAlarmCSN | 1.3.6.1.4.1.2011.2.15.2.4.3.3.1 | OCTET STRING | read-only | Serial number of the alarm > 0. An alarm is identified by a unique number. |
| OCT iMAPNorthboundAlarmCategory | 1.3.6.1.4.1.2011.2.15.2.4.3.3.2 | OCTET STRING | read-only | Category can be one of the following: 1 - Fault 2 - Clear 3 - Event 4 - Acknowledge 5 - Unacknowledge 9 - Change |
| OCT iMAPNorthboundAlarmOccurTime | 1.3.6.1.4.1.2011.2.15.2.4.3.3.3 | OCTET STRING | read-only | Fault occurrence time, time at which the alarm has been raised |
| OCT iMAPNorthboundAlarmMOName | 1.3.6.1.4.1.2011.2.15.2.4.3.3.4 | OCTET STRING | read-only | Managed object name for which the alarm has been generated |
| INT iMAPNorthboundAlarmProductID | 1.3.6.1.4.1.2011.2.15.2.4.3.3.5 | INTEGER | read-only | Product type ID: 1 - transmission 2 - mobile 3 - fixed network narrowband 4 - fixed network broadband 5 - intelligent network 6 - omc |
| OCT iMAPNorthboundAlarmNEType | 1.3.6.1.4.1.2011.2.15.2.4.3.3.6 | OCTET STRING | read-only | Network Element Type ID |
| OCT iMAPNorthboundAlarmNEDevID | 1.3.6.1.4.1.2011.2.15.2.4.3.3.7 | OCTET STRING | read-only | Network Element ID or Device ID |
| OCT iMAPNorthboundAlarmDevCsn | 1.3.6.1.4.1.2011.2.15.2.4.3.3.8 | OCTET STRING | read-only | Serial number of the alarm device, unique in the same NE. |
| I32 iMAPNorthboundAlarmID | 1.3.6.1.4.1.2011.2.15.2.4.3.3.9 | Integer32 | read-only | Alarm ID of the generated alarm |
| I32 iMAPNorthboundAlarmType | 1.3.6.1.4.1.2011.2.15.2.4.3.3.10 | Integer32 | read-only | Alarm type. It can be one of the following: 1 - Power System 2 - Environment System 3 - Signaling System 4 - Trunk System 5 - Hardware System 6 - Software System 7 - Running System 8 - Communication System 9 - QoS 10 - Processing error 11 - OMC |
| INT iMAPNorthboundAlarmLevel | 1.3.6.1.4.1.2011.2.15.2.4.3.3.11 | INTEGER | read-only | Level is the alarm severity. It can be one of the following: 1 - Critical 2 - Major 3 - Minor 4 - Warning 6 - Cleared |
| INT iMAPNorthboundAlarmRestore | 1.3.6.1.4.1.2011.2.15.2.4.3.3.12 | INTEGER | read-only | Alarm clear status 1 - Cleared 2 - Uncleared |
| INT iMAPNorthboundAlarmConfirm | 1.3.6.1.4.1.2011.2.15.2.4.3.3.13 | INTEGER | read-only | Alarm acknowledgement status 1 - Acknowledged 2 - Unacknowledged |
| OCT iMAPNorthboundAlarmAckTime | 1.3.6.1.4.1.2011.2.15.2.4.3.3.14 | OCTET STRING | read-only | Alarm acknowledgement time |
| OCT iMAPNorthboundAlarmRestoreTime | 1.3.6.1.4.1.2011.2.15.2.4.3.3.15 | OCTET STRING | read-only | Alarm clearance time |
| OCT iMAPNorthboundAlarmOperator | 1.3.6.1.4.1.2011.2.15.2.4.3.3.16 | OCTET STRING | read-only | Operator, who performs the acknowledgement and clearance operations. |
| I32 iMAPNorthboundAlarmParas1 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.17 | Integer32 | read-only | Reserved field 1 |
| I32 iMAPNorthboundAlarmParas2 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.18 | Integer32 | read-only | Reserved field 2 |
| I32 iMAPNorthboundAlarmParas3 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.19 | Integer32 | read-only | Reserved field 3 |
| I32 iMAPNorthboundAlarmParas4 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.20 | Integer32 | read-only | Reserved field 4 |
| I32 iMAPNorthboundAlarmParas5 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.21 | Integer32 | read-only | Reserved field 5 |
| I32 iMAPNorthboundAlarmParas6 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.22 | Integer32 | read-only | Reserved field 6 |
| I32 iMAPNorthboundAlarmParas7 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.23 | Integer32 | read-only | Reserved field 7 |
| I32 iMAPNorthboundAlarmParas8 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.24 | Integer32 | read-only | Reserved field 8 |
| I32 iMAPNorthboundAlarmParas9 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.25 | Integer32 | read-only | Reserved field 9 |
| I32 iMAPNorthboundAlarmParas10 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.26 | Integer32 | read-only | Original alarm level, defined by the device when the alarm is generated. 1 Critical 2 Major 3 Minor 4 Warning |
| OCT iMAPNorthboundAlarmExtendInfo | 1.3.6.1.4.1.2011.2.15.2.4.3.3.27 | OCTET STRING | read-only | Extended information (max: 250 characters) Alarm extended information, including the location information of the alarm. |
| OCT iMAPNorthboundAlarmProbablecause | 1.3.6.1.4.1.2011.2.15.2.4.3.3.28 | OCTET STRING | read-only | Probable cause of the alarm (max: 250 characters) |
| OCT iMAPNorthboundAlarmProposedrepairactions | 1.3.6.1.4.1.2011.2.15.2.4.3.3.29 | OCTET STRING | read-only | Alarm repair recommendations (max: 250 characters) |
| OCT iMAPNorthboundAlarmSpecificproblems | 1.3.6.1.4.1.2011.2.15.2.4.3.3.30 | OCTET STRING | read-only | Alarm detailed reasons (max: 250 characters) |
| OCT iMAPNorthboundAlarmExtendProductItem1 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.31 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem2 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.32 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem3 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.33 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem4 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.34 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem5 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.35 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem6 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.36 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem7 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.37 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem8 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.38 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem9 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.39 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem10 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.40 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem11 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.41 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem12 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.42 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem13 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.43 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem14 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.44 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmExtendProductItem15 | 1.3.6.1.4.1.2011.2.15.2.4.3.3.45 | OCTET STRING | read-only | This is one of 15 extensible alarm fields to be reported as part of alarm information. The fields to be reported are decided by the configuration for the SNMP agent in file snmpsvc.xml. For string type parameters the maximum supported length is 250 characters. If string is longer it will be truncated to 250 characters. |
| OCT iMAPNorthboundAlarmClearOperator | 1.3.6.1.4.1.2011.2.15.2.4.3.3.46 | OCTET STRING | accessible-for-notify | The operator who cleared this alarm. |
| OCT iMAPNorthboundAlarmObjectInstanceType | 1.3.6.1.4.1.2011.2.15.2.4.3.3.47 | OCTET STRING | accessible-for-notify | Object instance type for the raised alarm |
| OCT iMAPNorthboundAlarmClearCategory | 1.3.6.1.4.1.2011.2.15.2.4.3.3.48 | OCTET STRING | accessible-for-notify | This specifies the Clear Category of alarms. 0 1 - ADAC (Automatically Detected Automcatically Cleared) 2 - ADMC (Automatically Detected Manually Cleared) |
| OCT iMAPNorthboundAlarmClearType | 1.3.6.1.4.1.2011.2.15.2.4.3.3.49 | OCTET STRING | accessible-for-notify | This specifies the Clear Type of alarms. 0 1 - Normal Clear 2 - Restore Clear 3 - Manual Clear 4 - Configure Clear 5 - Co-relation Clear |
| OCT iMAPNorthboundAlarmServiceAffectFlag | 1.3.6.1.4.1.2011.2.15.2.4.3.3.50 | OCTET STRING | accessible-for-notify | Affecting service flag for the alarm |
| OCT iMAPNorthboundAlarmAdditionalInfo | 1.3.6.1.4.1.2011.2.15.2.4.3.3.51 | OCTET STRING | accessible-for-notify | Additional Information regarding the alarm |
| iMAPNorthboundFaultAcknowledge | 1.3.6.1.4.1.2011.2.15.2.4.4 | |||
| OCT iMAPNorthboundAlarmAcknowledge | 1.3.6.1.4.1.2011.2.15.2.4.4.1 | OCTET STRING | read-write | Give serial number(s) of alarms to be acknowledged. Multiple serial numbers are separated by comma(,). Alarms serial number(s) are of type unsigned long and incompatible types are automatically considered as invalid serial number(s). Get attempt on this node will result in error. Output: Serial number(s) of alarms which could not be acknowledged. This also contains invalid Alarm serial number(s). If all alarms are successfully acknowledged then output is blank. |
| iMAPNorthboundFaultUnAcknowledge | 1.3.6.1.4.1.2011.2.15.2.4.5 | |||
| OCT iMAPNorthboundAlarmUnAcknowledge | 1.3.6.1.4.1.2011.2.15.2.4.5.1 | OCTET STRING | read-write | Give serial number(s) of alarms to be unacknowledged. Multiple serial numbers are separated by comma(,). Alarms serial number(s) are of type unsigned long and incompatible types are automatically considered as invalid serial number(s). Get attempt on this node will result in error. Output: Serial number(s) of alarms which could not be unacknowledged. This also contains invalid Alarm serial number(s). If all alarms are successfully unacknowledged then output is blank. |
| iMAPNorthboundFaultClear | 1.3.6.1.4.1.2011.2.15.2.4.6 | |||
| OCT iMAPNorthboundAlarmClear | 1.3.6.1.4.1.2011.2.15.2.4.6.1 | OCTET STRING | read-write | Give serial number(s) of alarms to be cleared. Multiple serial numbers are separated by comma(,). Alarms serial number(s)are of type unsigned long and incompatible types are automatically considered as invalid serial number(s). Get attempt on this node will result in error. Output: Serial number(s) of alarms which could not be cleared. This also contains invalid Alarm serial number(s). If all alarms are successfully cleared then output is blank. |
| iMAPConformance | 1.3.6.1.4.1.2011.3 | |||
| iMAPGroups | 1.3.6.1.4.1.2011.3.1 | |||
| currentObjectGroup | 1.3.6.1.4.1.2011.3.1.1 | The OBJECT-GROUP for SNMP Northbound Interface | ||
| currentNotificationGroup | 1.3.6.1.4.1.2011.3.1.2 | The NOTIFICATION-GROUP for SNMP Northbound Interface. Consists of: 1. Alarm Report Notification 2. Alarm Query Begin Notification 3. Alarm Query Notification 4. Alarm Query End Notification 5. HeartBeat Notification | ||
| iMAPCompliances | 1.3.6.1.4.1.2011.3.2 | |||
| basicCompliance | 1.3.6.1.4.1.2011.3.2.1 | MODULE-COMPLIANCE for SNMP Northbound Interface |
RFC description
Manages SNMP Northbound Interface objects for iMAP system with event management and heartbeat notification support.
Start monitoring Network management system (NMS) northbound interface platform with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.