ENVIROMUX

All MIBs › ENVIROMUX

Organization: Network Technologies Inc.

Last Updated: 2006--0-9-

Description: ENVIROMUX module

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ENVIROMUX?

ENVIROMUX is the MIB for NTI's (Network Technologies Inc.) ENVIROMUX environmental monitoring appliances, in this case the SEMS-16 master unit configuration with no slave units connected. It exposes system identification objects (enterprise name, location, contact, phone, current time) and an internal-sensor table describing each onboard sensor's type, description, and group assignment. As a dedicated environmental monitoring hardware appliance, its entire purpose is monitoring physical conditions -- temperature, and depending on connected probes, humidity, water, or airflow -- at the site or rack where it's installed, making sensor status the core data of interest. It has no dependency on another standard networking MIB, as it's a self-contained appliance MIB defined under NTI's private enterprise branch. It is deployed as a standalone environmental sensor hub in data centers, server rooms, or remote sites monitoring rack-level or room-level conditions. Engineers can download the ENVIROMUX file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ENVIROMUX. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

NTI ENVIROMUX environmental monitoring appliance (SEMS-16 master unit)

Monitoring Examples

An admin would walk intSensorTable/intSensorEntry to read intSensorType and intSensorDescription for each connected internal sensor, monitoring its reading to detect an out-of-range temperature or environmental condition at the monitored site. sysTime confirms the unit's clock is correct so that any alarm timestamps are trustworthy. Grouping sensors via intSensorGroup/intSensorGroupNb lets an admin organize alerts by rack or room zone.

What Can Be Monitored

sensor type per channel
sensor description/location
sensor grouping
system time
site contact/location metadata

Imported Objects

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
nti	1.3.6.1.4.1.3699
products	1.3.6.1.4.1.3699.1
hardware	1.3.6.1.4.1.3699.1.1
enviromuxSems16	1.3.6.1.4.1.3699.1.1.2			ENVIROMUX-SEMS-16 MIB module - Master Unit with no slaves connected
masterUnit	1.3.6.1.4.1.3699.1.1.2.1
hostSystem	1.3.6.1.4.1.3699.1.1.2.1.1
STR sysTime	1.3.6.1.4.1.3699.1.1.2.1.1.1	DisplayString	read-only	System time
STR sysEnterpriseName	1.3.6.1.4.1.3699.1.1.2.1.1.2	DisplayString	read-only	EnterpriseName
STR sysEnterpriseLocation	1.3.6.1.4.1.3699.1.1.2.1.1.3	DisplayString	read-only	Enterprise Location
STR sysEnterpriseContact	1.3.6.1.4.1.3699.1.1.2.1.1.4	DisplayString	read-only	Enterprise Contact
STR sysEnterprisePhone	1.3.6.1.4.1.3699.1.1.2.1.1.5	DisplayString	read-only	Enterprise Phone
users	1.3.6.1.4.1.3699.1.1.2.1.2
groups	1.3.6.1.4.1.3699.1.1.2.1.3
intSensors	1.3.6.1.4.1.3699.1.1.2.1.4
intSensorTable	1.3.6.1.4.1.3699.1.1.2.1.4.1		not-accessible	Table of internal Sensor entries
intSensorEntry	1.3.6.1.4.1.3699.1.1.2.1.4.1.1		not-accessible	An internal sensor entry
INT intSensorIndex	1.3.6.1.4.1.3699.1.1.2.1.4.1.1.1	INTEGER	read-only	The index of the internal sensor entry 1..12
INT intSensorType	1.3.6.1.4.1.3699.1.1.2.1.4.1.1.2	INTEGER	read-only	Sensor Type
STR intSensorDescription	1.3.6.1.4.1.3699.1.1.2.1.4.1.1.3	DisplayString	read-write	Internal Sensor Description
INT intSensorGroupNb	1.3.6.1.4.1.3699.1.1.2.1.4.1.1.4	INTEGER	read-write	Internal Sensor Group Number
STR intSensorGroup	1.3.6.1.4.1.3699.1.1.2.1.4.1.1.5	DisplayString	read-only	Internal Sensor Group Name
INT intSensorValue	1.3.6.1.4.1.3699.1.1.2.1.4.1.1.6	INTEGER	read-only	The value of the internal sensor reading. For temperature it is presented in tenths of degrees
INT intSensorUnit	1.3.6.1.4.1.3699.1.1.2.1.4.1.1.7	INTEGER	read-write	The measuremnet unit for this sensor. It is important only for temperature
STR intSensorUnitName	1.3.6.1.4.1.3699.1.1.2.1.4.1.1.8	DisplayString	read-only	The measuremnet unit for this sensor in readable format
INT intSensorStatus	1.3.6.1.4.1.3699.1.1.2.1.4.1.1.9	INTEGER	read-only	The status of the sensor
INT intSensorMinThreshold	1.3.6.1.4.1.3699.1.1.2.1.4.1.1.10	INTEGER	read-write	The value of the internal sensor lower threshold
INT intSensorMaxThreshold	1.3.6.1.4.1.3699.1.1.2.1.4.1.1.11	INTEGER	read-write	The value of the internal sensor upper threshold
extSensors	1.3.6.1.4.1.3699.1.1.2.1.5
extSensorTable	1.3.6.1.4.1.3699.1.1.2.1.5.1		not-accessible	Table of external Sensors entries
extSensorEntry	1.3.6.1.4.1.3699.1.1.2.1.5.1.1		not-accessible	An external sensor entry
INT extSensorIndex	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.1	INTEGER	read-only	The index of the external sensor entry 1..32
INT extSensorType	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.2	INTEGER	read-only	Sensor Type
STR extSensorDescription	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.3	DisplayString	read-write	Sensor Description
INT extSensorConnector	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.4	INTEGER	read-only	Connector where the sensor is attached
INT extSensorGroupNb	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.5	INTEGER	read-write	Sensor's Group
STR extSensorGroup	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.6	DisplayString	read-only	Sensor's Group Name
INT extSensorValue	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.7	INTEGER	read-only	The value of the external sensor reading. For temperature it is presented in tenths of degrees
INT extSensorUnit	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.8	INTEGER	read-write	The measuremnet unit for this sensor. It is important only for temperature
STR extSensorUnitName	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.9	DisplayString	read-only	The measuremnet unit for this sensor in readable format
INT extSensorStatus	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.10	INTEGER	read-only	The status of the sensor
INT extSensorMinThreshold	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.11	INTEGER	read-write	The value of the sensor lower threshold
INT extSensorMaxThreshold	1.3.6.1.4.1.3699.1.1.2.1.5.1.1.12	INTEGER	read-write	The value of the sensor upper threshold
digInputs	1.3.6.1.4.1.3699.1.1.2.1.6
digInputTable	1.3.6.1.4.1.3699.1.1.2.1.6.1		not-accessible	Table of Digital Inputs entries
digInputEntry	1.3.6.1.4.1.3699.1.1.2.1.6.1.1		not-accessible	A Digital Input entry
INT digInputIndex	1.3.6.1.4.1.3699.1.1.2.1.6.1.1.1	INTEGER	read-only	The index of the digital input entry 1..8
STR digInputDescription	1.3.6.1.4.1.3699.1.1.2.1.6.1.1.2	DisplayString	read-write	Digital Input Description
INT digInputGroupNb	1.3.6.1.4.1.3699.1.1.2.1.6.1.1.3	INTEGER	read-write	Digital Input's Group Number
STR digInputGroup	1.3.6.1.4.1.3699.1.1.2.1.6.1.1.4	DisplayString	read-only	Digital Input's Group Name
INT digInputValue	1.3.6.1.4.1.3699.1.1.2.1.6.1.1.5	INTEGER	read-only	The value of the Digital Input reading
INT digInputNormalValue	1.3.6.1.4.1.3699.1.1.2.1.6.1.1.6	INTEGER	read-only	The value of the Digital Input reading in normal status
INT digInputStatus	1.3.6.1.4.1.3699.1.1.2.1.6.1.1.7	INTEGER	read-only	The status of the Digital Input
rlyOutputs	1.3.6.1.4.1.3699.1.1.2.1.7
rlyOutputTable	1.3.6.1.4.1.3699.1.1.2.1.7.1		not-accessible	Table of Relay Outputs entries
rlyOutputEntry	1.3.6.1.4.1.3699.1.1.2.1.7.1.1		not-accessible	A Relay Output entry
INT rlyOutputIndex	1.3.6.1.4.1.3699.1.1.2.1.7.1.1.1	INTEGER	read-only	The index of the control output entry 1..4
STR rlyOutputDescription	1.3.6.1.4.1.3699.1.1.2.1.7.1.1.2	DisplayString	read-write	Relay Output Description
INT rlyOutputGroupNb	1.3.6.1.4.1.3699.1.1.2.1.7.1.1.3	INTEGER	read-write	Relay Output's Group Number
STR rlyOutputGroup	1.3.6.1.4.1.3699.1.1.2.1.7.1.1.4	DisplayString	read-only	Relay Output's Group Name
INT rlyOutputValue	1.3.6.1.4.1.3699.1.1.2.1.7.1.1.5	INTEGER	read-only	The value of the Relay Output reading
INT rlyOutputNormalValue	1.3.6.1.4.1.3699.1.1.2.1.7.1.1.6	INTEGER	read-only	The value of the Relay Output reading in normal status
ipDevices	1.3.6.1.4.1.3699.1.1.2.1.8
ipDeviceTable	1.3.6.1.4.1.3699.1.1.2.1.8.1		not-accessible	Table of IP Devices entries
ipDeviceEntry	1.3.6.1.4.1.3699.1.1.2.1.8.1.1		not-accessible	An IP Device entry
INT ipDeviceIndex	1.3.6.1.4.1.3699.1.1.2.1.8.1.1.1	INTEGER	read-only	The index of the IP Device entry 1..64
STR ipDeviceAddress	1.3.6.1.4.1.3699.1.1.2.1.8.1.1.2	DisplayString	read-write	IP Device URL
STR ipDeviceDescription	1.3.6.1.4.1.3699.1.1.2.1.8.1.1.3	DisplayString	read-write	IP Device Description
INT ipDeviceGroupNb	1.3.6.1.4.1.3699.1.1.2.1.8.1.1.4	INTEGER	read-write	Index of the group the IP Device belongs to
STR ipDeviceGroup	1.3.6.1.4.1.3699.1.1.2.1.8.1.1.5	DisplayString	read-only	Name of the group the IP Device belongs to
INT ipDeviceTimeout	1.3.6.1.4.1.3699.1.1.2.1.8.1.1.6	INTEGER	read-write	IP Device ping timeout (in seconds)
INT ipDeviceRetries	1.3.6.1.4.1.3699.1.1.2.1.8.1.1.7	INTEGER	read-only	Number of ping retries to the IP device, until responding
INT ipDeviceValue	1.3.6.1.4.1.3699.1.1.2.1.8.1.1.8	INTEGER	read-write	Responding status
INT ipDeviceStatus	1.3.6.1.4.1.3699.1.1.2.1.8.1.1.9	INTEGER	read-only	Alarm status of the IP Device
ipLinks	1.3.6.1.4.1.3699.1.1.2.1.9
ipLinkTable	1.3.6.1.4.1.3699.1.1.2.1.9.1		not-accessible	Table of Links entries
ipLinkEntry	1.3.6.1.4.1.3699.1.1.2.1.9.1.1		not-accessible	A Link entry
INT ipLinkIndex	1.3.6.1.4.1.3699.1.1.2.1.9.1.1.1	INTEGER	read-only	The index of the IP Link entry 1..64
STR ipLinkAddress	1.3.6.1.4.1.3699.1.1.2.1.9.1.1.2	DisplayString	read-write	IP Link URL
STR ipLinkDescription	1.3.6.1.4.1.3699.1.1.2.1.9.1.1.3	DisplayString	read-write	IP Link Description
envTraps	1.3.6.1.4.1.3699.1.1.2.100
otherProduct	1.3.6.1.4.1.3699.1.1.200
software	1.3.6.1.4.1.3699.1.2
experimental	1.3.6.1.4.1.3699.2

RFC description

Network Technologies ENVIROMUX-SEMS-16 MIB for environmental monitoring including sensors, relay outputs, and IP devices.

Start monitoring NTI ENVIROMUX environmental monitoring appliance (SEMS-16 master unit) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ENVIROMUX

What Is ENVIROMUX?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description