HUAWEI-POS-MIB

All MIBs › HUAWEI-POS-MIB

Organization: Huawei-3Com Tech, Inc.

Last Updated: 2004-10-15

Category: Domain: Optical Transport, Domain: WAN, Technology: Optical Transport, Vendor: Huawei

Description: Huawei POS (Packet over SONET/SDH) MIB for managing POS interface framing, alarm reporting, and performance monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-POS-MIB?

HUAWEI-POS-MIB is a Huawei-3Com Tech, Inc. proprietary MIB managing POS-Access (Packet-over-SONET or Point-of-Sale, X.121-addressed access here) application sessions. Its application table, keyed by ID, records connect mode, state, ifIndex, host IP/port, source IP, received/error/distribution-error/buffered/discarded packet counters, a debug flag, row status, and X.121 address, while an interworking table records POS ID, ifIndex, connect state, and received/error/map-error packet counters. As a configuration/status MIB it lets an administrator confirm POS-Access session state and watch packet-error counters on a Huawei device. It is deployed on Huawei-3Com POS-Access equipment. Engineers can download the HUAWEI-POS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-POS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei-3Com POS-Access equipment

Monitoring Examples

An administrator checks posAppState and posAppErrPacCounter to confirm a POS-Access application session's health on a Huawei-3Com device.

What Can Be Monitored

POS-Access session state and packet-error counters

Imported Objects

From HUAWEI-3COM-OID-MIB

huawei	OBJECT-IDENTITY
mlsr	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus

How to Use in IPNetwork Monitor

Example using posAppRecvPacCounter OID:

Select a Huawei-3Com POS-Access equipment as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type posAppRecvPacCounter into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of packets received by the application. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
pos	1.3.6.1.4.1.2011.2.33.8			The POS MIB module is used to manage POS-Access.
posAppTable	1.3.6.1.4.1.2011.2.33.8.1		not-accessible	The table to get and set the application informatin.
posAppEntry	1.3.6.1.4.1.2011.2.33.8.1.1		not-accessible	The content of posAppTable.
INT posAppId	1.3.6.1.4.1.2011.2.33.8.1.1.1	INTEGER	read-only	The ID of application.
INT posAppConnectMode	1.3.6.1.4.1.2011.2.33.8.1.1.2	INTEGER	read-create	The connect mode of application. If the router and unix are connected by TCP protocol, the connect mode of application is tcp. If the router and unix are connected by async interface, the connect mode of application is flow. If the router is used as POSPAD device, the connect mode of application is pad.
INT posAppState	1.3.6.1.4.1.2011.2.33.8.1.1.3	INTEGER	read-only	The state of application.
INT posAppIfIndex	1.3.6.1.4.1.2011.2.33.8.1.1.4	INTEGER	read-create	The interface index of the application whose connect mode is flow or pad.
IP posAppHostIP	1.3.6.1.4.1.2011.2.33.8.1.1.5	IpAddress	read-create	The destination IP Address of application. Used for the application whose connect mode is tcp.
INT posAppPort	1.3.6.1.4.1.2011.2.33.8.1.1.6	INTEGER	read-create	The destination port of application. Used for the application whose connect mode is tcp.
IP posAppSourceIp	1.3.6.1.4.1.2011.2.33.8.1.1.7	IpAddress	read-create	The source IP Address of application. Used for the application whose connect mode is tcp.
C32 posAppRecvPacCounterEx	1.3.6.1.4.1.2011.2.33.8.1.1.8	Counter32	read-only	The number of packets received by the application.
C32 posAppErrPacCounter	1.3.6.1.4.1.2011.2.33.8.1.1.9	Counter32	read-only	The number of error packets received by the application.
C32 posAppDistrErrCounter	1.3.6.1.4.1.2011.2.33.8.1.1.10	Counter32	read-only	The number of packets that could not be sent to POS.
C32 posAppBuffedCounter	1.3.6.1.4.1.2011.2.33.8.1.1.11	Counter32	read-only	The number of packets stored in the buffer of application.
C32 posAppDiscardedCounter	1.3.6.1.4.1.2011.2.33.8.1.1.12	Counter32	read-only	The number of packets discarded by the application.
INT posAppDebug	1.3.6.1.4.1.2011.2.33.8.1.1.13	INTEGER	read-create	The debugging switch of application.
ROW posAppRowStatus	1.3.6.1.4.1.2011.2.33.8.1.1.14	RowStatus	read-create	The status of row. Only support active, CreateAndGo and destroy.
OCT posAppX121Addr	1.3.6.1.4.1.2011.2.33.8.1.1.15	OCTET STRING	read-create	The destination X121 Address of application which is an octet string made up of numeric. Used for the application whose connect mode is pad.
posInterTable	1.3.6.1.4.1.2011.2.33.8.2		not-accessible	The table to get and set the POS-Interface informatin.
posInterEntry	1.3.6.1.4.1.2011.2.33.8.2.1		not-accessible	The content of posInterTable.
INT posPosId	1.3.6.1.4.1.2011.2.33.8.2.1.1	INTEGER	read-only	The ID of the POS-Interface.
INT posPosIfIndex	1.3.6.1.4.1.2011.2.33.8.2.1.2	INTEGER	read-create	The interface index of the POS-Interface whose type is fcm, asy or pad-client.
INT posPosConnectState	1.3.6.1.4.1.2011.2.33.8.2.1.3	INTEGER	read-only	The state of the POS-Interface.
C32 posPosRecvPacCounter	1.3.6.1.4.1.2011.2.33.8.2.1.4	Counter32	read-only	The number of packets received by the POS-Interface.
C32 posPosErrPacCounter	1.3.6.1.4.1.2011.2.33.8.2.1.5	Counter32	read-only	The number of error packets received by the POS-Interface.
C32 posPosMapErrCounter	1.3.6.1.4.1.2011.2.33.8.2.1.6	Counter32	read-only	The number of packets that could not be sent to application.
C32 posPosBuffedCounter	1.3.6.1.4.1.2011.2.33.8.2.1.7	Counter32	read-only	The number of packets stored in the buffer of the POS-Interface.
C32 posPosDiscardedCounter	1.3.6.1.4.1.2011.2.33.8.2.1.8	Counter32	read-only	The number of packets discarded by the POS-Interface.
INT posPosInterDebug	1.3.6.1.4.1.2011.2.33.8.2.1.9	INTEGER	read-create	The debugging switch of the POS-Interface.
ROW posPosInterRowStatus	1.3.6.1.4.1.2011.2.33.8.2.1.10	RowStatus	read-create	The status of row. Only support active, CreateAndGo and destroy.
INT posPosInterType	1.3.6.1.4.1.2011.2.33.8.2.1.11	INTEGER	read-create	The type of interface. The POS-Access mode has four types: FCM-Access, ASYNC-Access, simulating POSPAD device, POSPAD-Access. FCM-Access mode means POS and router are connected through PSTN. In this case, posPosInterType should be set to fcm. ASYNC-Access mode means POS and router are connected by asynchronous cable. In this case, posPosInterType should be set to asy. Simulating POSPAD device means router connects POS through asynchronous cable and connects another router whose connect mode is pad-server through X.25 network. In this case, posPosInterType should be set to pad-client. POSPAD-Access mode means router connects POSPAD device through X.25 network. In this case, posPosInterType is pad-server. The posPosInterType can't be set to pad-server. It is autogenerated when POSPAD device initiates a connection to the router.
posMapTable	1.3.6.1.4.1.2011.2.33.8.3		not-accessible	The table to get and set the informatin of mapping relation of destination and application.
posMapEntry	1.3.6.1.4.1.2011.2.33.8.3.1		not-accessible	The content of posMapTable.
INT posMapDes	1.3.6.1.4.1.2011.2.33.8.3.1.1	INTEGER	read-create	The destination code of the mapping item. If the value is -1, it is the default item of mapping relation.
INT posMapAppNumber	1.3.6.1.4.1.2011.2.33.8.3.1.2	INTEGER	read-create	The application index of the mapping item.
ROW posMapRowStatus	1.3.6.1.4.1.2011.2.33.8.3.1.3	RowStatus	read-create	The status of row. Only support active, CreateAndGo and destroy.
posAsyAppTable	1.3.6.1.4.1.2011.2.33.8.4		not-accessible	The table to get and set the asynchronous-application interface information.
posAsyAppEntry	1.3.6.1.4.1.2011.2.33.8.4.1		not-accessible	The content of posAsyAppTable.
INT posAsyAppIfIndex	1.3.6.1.4.1.2011.2.33.8.4.1.1	INTEGER	read-only	The interface index of asynchronous-application.
ROW posAsyAppRowStatus	1.3.6.1.4.1.2011.2.33.8.4.1.2	RowStatus	read-create	The status of row. Only support active, CreateAndGo and destroy.
posFCMTable	1.3.6.1.4.1.2011.2.33.8.5		not-accessible	The table to get the information of FCM interface.
posFCMEntry	1.3.6.1.4.1.2011.2.33.8.5.1		not-accessible	The content of posFCMTable.
INT posFCMIfIndex	1.3.6.1.4.1.2011.2.33.8.5.1.1	INTEGER	read-only	The index of FCM interface.
C32 posFCMTimeoutCounter	1.3.6.1.4.1.2011.2.33.8.5.1.3	Counter32	read-only	The number that modem was hung up for timeout.
C32 posFCMConnectFailCounter	1.3.6.1.4.1.2011.2.33.8.5.1.4	Counter32	read-only	The number that modem could not handshake successfully.
INT posAppSum	1.3.6.1.4.1.2011.2.33.8.6	INTEGER	read-only	The total of configued applications.
INT posInterSum	1.3.6.1.4.1.2011.2.33.8.7	INTEGER	read-only	The total of configued POS-Interfaces.
INT posEnable	1.3.6.1.4.1.2011.2.33.8.8	INTEGER	read-write	To enable or diable pos-server.
INT posAppDebugAll	1.3.6.1.4.1.2011.2.33.8.9	INTEGER	read-write	To open or close the debugging switch of all applications.
INT posPosDebugAll	1.3.6.1.4.1.2011.2.33.8.10	INTEGER	read-write	To open or close the debugging switch of all POS-Interfaces.
INT posClearPacCounter	1.3.6.1.4.1.2011.2.33.8.11	INTEGER	read-write	To reset all packet counters of all applicaions and POS-Interfaces.
INT posEnableTrap	1.3.6.1.4.1.2011.2.33.8.13	INTEGER	read-write	To enable or disable trap switch.
INT posFCMAnswerTime	1.3.6.1.4.1.2011.2.33.8.14	INTEGER	read-write	FCM answer time, unit:ms.
INT posFCMTradeTime	1.3.6.1.4.1.2011.2.33.8.15	INTEGER	read-write	FCM trade time, unit:ms.
INT posFCMPacketInterval	1.3.6.1.4.1.2011.2.33.8.16	INTEGER	read-write	FCM packet interval time, unit:ms.
posTrap	1.3.6.1.4.1.2011.2.33.8.17
NTF posAppNotReadyTrap	1.3.6.1.4.1.2011.2.33.8.17.1			The agent will send a trap when the application whose state is linked isn't ready to send or receive data. Only used for the application whose connect mode is tcp.
NTF posAppConnectFailTrap	1.3.6.1.4.1.2011.2.33.8.17.2			The agent will send a trap if router can not connect to the application.
NTF posAppStateChangeTrap	1.3.6.1.4.1.2011.2.33.8.17.3			The agent will send a trap when the state of the application is changed to down or kept.
NTF posAppNotConfigedTrap	1.3.6.1.4.1.2011.2.33.8.17.4			The agent will send a trap if the application isn't configured.
NTF posAppBuffOverFlowTrap	1.3.6.1.4.1.2011.2.33.8.17.5			The agent will send a trap if the application buffer is overflowed.
NTF posAppDebugOpenTrap	1.3.6.1.4.1.2011.2.33.8.17.6			The agent will send a trap if the debugging switch of application is open.
NTF posAppDebugAllOpenTrap	1.3.6.1.4.1.2011.2.33.8.17.7			The agent will send a trap if the all debugging switches of application are open.
NTF posInterBuffOverFlowTrap	1.3.6.1.4.1.2011.2.33.8.17.8			The agent will send a trap if the distributing buffer is overflowed.
NTF posInterStateChangeTrap	1.3.6.1.4.1.2011.2.33.8.17.9			The agent will send a trap if the state of POS-Interface is changed to down.
NTF posInterDebugOpenTrap	1.3.6.1.4.1.2011.2.33.8.17.10			The agent will send a trap if the debug of POS-Interface is open.
NTF posInterDebugAllOpenTrap	1.3.6.1.4.1.2011.2.33.8.17.11			The agent will send a trap if the all debugs of POS-Interface are open.
NTF posFCMTimeoutTrap	1.3.6.1.4.1.2011.2.33.8.17.12			The agent will send a trap if the modem is hung up for timeout.
NTF posFCMConnectFailTrap	1.3.6.1.4.1.2011.2.33.8.17.13			The agent will send a trap if the handshaking of modems is not successful.
NTF posClearPacketCounter	1.3.6.1.4.1.2011.2.33.8.17.14			The agent will send a trap when the packet counter of the POS application and interface is cleared.
NTF posClearFCMCounter	1.3.6.1.4.1.2011.2.33.8.17.15			The agent will send a trap when the FCM counter is cleared.
INT posPadWaitTime	1.3.6.1.4.1.2011.2.33.8.18	INTEGER	read-write	The time that POS-Interface needs to wait to receive another packet, unit:ms. It may be configured when router is used as POSPAD device. In other cases, It is useless.
INT posPadIdleTimeout	1.3.6.1.4.1.2011.2.33.8.19	INTEGER	read-write	If these is no packet transmitting through the time, the connection of POSPAD device and router whose connect mode is pad-server will be cut off. Unit:s.
INT posPadPacType	1.3.6.1.4.1.2011.2.33.8.20	INTEGER	read-write	The type of packet.Between POSPAD device and router whose connect mode is pad-server, there are two types of packet. One is synchronous, the other is asynchronous.
INT posPadCheckSChar	1.3.6.1.4.1.2011.2.33.8.21	INTEGER	read-write	To enable or disable the checking of 10 04 characters in packet. It is used for the router which is used as POSPAD device. When the value is disable, it will check packet that just includes 10 04 charaters. If there are 10 04 packet, the router which is used as POSPAD device will disconnect from POSPAD-access router. When the value is enable, it will check 10 04 characters in packet. If there are 10 04 characters in packet, the router which is used as POSPAD device will disconnect from POSPAD-access router.
posPadTable	1.3.6.1.4.1.2011.2.33.8.22		not-accessible	The table to enable or disable POSPAD-Access function under serial interface.
posPadEntry	1.3.6.1.4.1.2011.2.33.8.22.1		not-accessible	The content of posPadTable.
INT posPadIfIndex	1.3.6.1.4.1.2011.2.33.8.22.1.1	INTEGER	not-accessible	The index of serial interface.
ROW posPadRowStatus	1.3.6.1.4.1.2011.2.33.8.22.1.2	RowStatus	read-create	The status of row. Only support active, CreateAndGo and destroy.

RFC description

Manages Point-of-Sale (POS) access connections on Huawei routers, including application and protocol configuration.

Start monitoring Huawei-3Com POS-Access equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-POS-MIB