HUAWEI-NVO3-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-NVO3-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2017-06-20

Category: Technology: IPv6, Technology: SDN/OpenFlow, Vendor: Huawei

Description: Huawei NVO3 (Network Virtualization over Layer 3) MIB for managing VXLAN/NVGRE overlays, VNIs, and tunnel endpoints.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-NVO3-MIB?

HUAWEI-NVO3-MIB is a Huawei Technologies Co.,Ltd. proprietary MIB managing NVO3 (Network Virtualization over Layer 3, e.g. VXLAN) overlay tunnels. Its objects cover an NVE (Network Virtualization Edge) table (ifIndex, source address), an NVE-VNI-peer table (VNI, peer address, row status), a VXLAN-tunnel table (source/destination address, status), an IPv6 VXLAN-tunnel table, a per-VNI statistics table (RX/TX bits per second), and a VXLAN-tunnel-down notification. As a configuration/performance MIB it lets an administrator confirm VXLAN tunnel endpoint configuration and watch per-VNI throughput on a Huawei NVO3 overlay device. It is deployed on Huawei Technologies networking equipment (NVO3/VXLAN overlay). Engineers can download the HUAWEI-NVO3-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-NVO3-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Huawei Technologies networking equipment (NVO3/VXLAN overlay)

Monitoring Examples

An administrator checks hwNvo3VxlanTnlStatus and hwVniTxBitsPerSec to confirm VXLAN tunnel state and watch per-VNI throughput on a Huawei NVO3 device.

What Can Be Monitored

  • VXLAN tunnel configuration and per-VNI throughput
Imported Objects

From HUAWEI-MIB

hwDatacommOBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From IPV6-TC

Ipv6Address

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
OIDs

RFC description

Huawei vendor-private MIB for Network Virtualization Overlay (NVO3) management and monitoring.

Start monitoring Huawei networking equipment (NVO3/VXLAN overlay) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-NVO3-MIB