BIANCA-BRICK-OSPF-MIB

All MIBs › BIANCA-BRICK-OSPF-MIB

Category: Routing Protocols, Vendor: bintec

Description: Manages OSPF routing protocol configuration and neighbor relationships on bintec elmeg BIANCA/BRICK routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BIANCA-BRICK-OSPF-MIB?

BIANCA-BRICK-OSPF-MIB is a vendor-specific enterprise MIB from bintec elmeg for configuring and monitoring OSPF routing protocol state and neighbor relationships on BIANCA/BRICK routers. It belongs to the routing-protocol configuration/state category. Its monitoring focus is software/protocol health: OSPF neighbor adjacency state functions similarly to a protocol-level uptime/heartbeat indicator, and area/interface configuration objects let an operator confirm the OSPF process is correctly provisioned, both of which reveal routing-software problems (stuck adjacencies, area misconfiguration) rather than physical faults. It builds on concepts from the standard OSPF-MIB (RFC 1850/4750 lineage) adapted into bintec's enterprise tree. It is deployed on bintec elmeg BIANCA/BRICK routers participating in OSPF-routed small-business or branch networks. Engineers can download the BIANCA-BRICK-OSPF-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BIANCA-BRICK-OSPF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

bintec elmeg BIANCA/BRICK router

Monitoring Examples

No sample_objects were provided for this module, so no concrete table/object names can be cited; based on its scope it would expose an OSPF neighbor table with adjacency state per neighbor and area/interface configuration objects analogous to the standard OSPF-MIB. An operator would poll neighbor state to detect a neighbor stuck outside the Full state, revealing an OSPF adjacency problem. No fabricated object names are used given the empty sample_objects list.

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
IpAddress
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
org	1.3
dod	1.3.6
internet	1.3.6.1
private	1.3.6.1.4
enterprises	1.3.6.1.4.1
bintec	1.3.6.1.4.1.272
bibo	1.3.6.1.4.1.272.4
biboip	1.3.6.1.4.1.272.4.5
ospfErr	1.3.6.1.4.1.272.4.5.11
CTR ospfErrOspfBadVersion	1.3.6.1.4.1.272.4.5.11.1	Counter	read-only	Counts the number of OSPF packets received with bad version number.
CTR ospfErrOspfBadPacketType	1.3.6.1.4.1.272.4.5.11.2	Counter	read-only	Counts the number of OSPF packets received with bad packet type.
CTR ospfErrOspfBadChecksum	1.3.6.1.4.1.272.4.5.11.3	Counter	read-only	Counts the number of OSPF packets received with bad checksum.
CTR ospfErrIpBadDestination	1.3.6.1.4.1.272.4.5.11.4	Counter	read-only	Counts the number of OSPF packets received with bad destination IP address.
CTR ospfErrOspfBadAreaId	1.3.6.1.4.1.272.4.5.11.5	Counter	read-only	Counts the number of OSPF packets with the wrong area field.
CTR ospfErrOspfAuthenticationFailed	1.3.6.1.4.1.272.4.5.11.6	Counter	read-only	Counts the number of OSPF packets with wrong authentication.
CTR ospfErrOspfUnknownNeighbor	1.3.6.1.4.1.272.4.5.11.7	Counter	read-only	Counts the number of OSPF packets received from an unknown neighbor.
CTR ospfErrHelloNetmaskMismatch	1.3.6.1.4.1.272.4.5.11.8	Counter	read-only	Counts the number of Hello packets received with wrong network mask.
CTR ospfErrHelloDeadTimerMismatch	1.3.6.1.4.1.272.4.5.11.9	Counter	read-only	Counts the number of OSPF Hello packets where the DeadTimer was not equal to the DeadTimer of the associated interface.
CTR ospfErrHelloTimerMismatch	1.3.6.1.4.1.272.4.5.11.10	Counter	read-only	Counts the number of OSPF Hello packets where the HelloTimer was not equal to the DeadTimer of the associated interface.
CTR ospfErrHelloOptionMismatch	1.3.6.1.4.1.272.4.5.11.11	Counter	read-only	Counts the number of OSPF Hello packets with bad options.
CTR ospfErrOspfRouterIdConfusion	1.3.6.1.4.1.272.4.5.11.12	Counter	read-only	Counts the number of packets received that used our own router id.
CTR ospfErrOspfUnknownLsaType	1.3.6.1.4.1.272.4.5.11.13	Counter	read-only	Counts the number of unknown LSAs received.
CTR ospfErrDdOptionMismatch	1.3.6.1.4.1.272.4.5.11.14	Counter	read-only	Counts the number of OSPF DD packets with bad options.
CTR ospfErrDdNeighborStateLow	1.3.6.1.4.1.272.4.5.11.15	Counter	read-only	Counts the number of OSPF DD packets received then the neighbor was in the wrong state.
CTR ospfErrLsackBadAck	1.3.6.1.4.1.272.4.5.11.16	Counter	read-only	Counts the number of OSPF LS Acknowledge packets received that were not exactly found on the retransmission list of that neighbor, i.e. with the wrong sequence number or checksum.
CTR ospfErrLsackDuplicateAck	1.3.6.1.4.1.272.4.5.11.17	Counter	read-only	Counts the number of OSPF LS Acknowledge packets received that were not found on the retransmission list of that neighbor.
CTR ospfErrLsreqBadRequest	1.3.6.1.4.1.272.4.5.11.18	Counter	read-only	Counts the number of requests for LSAs that were not found in the database.
CTR ospfErrLsreqNeighborStateLow	1.3.6.1.4.1.272.4.5.11.19	Counter	read-only	Counts the number of OSPF LS Request packets received then the neighbor was in the wrong state.
CTR ospfErrLsupdNeighborStateLow	1.3.6.1.4.1.272.4.5.11.20	Counter	read-only	Counts the number of OSPF LS Update packets received then the neighbor was in the wrong state.
CTR ospfErrLsupdBadLsaChecksum	1.3.6.1.4.1.272.4.5.11.21	Counter	read-only	Counts the number of OSPF LS Update packets with bad checksum.
CTR ospfErrLsupdNewerSelfgenLsa	1.3.6.1.4.1.272.4.5.11.22	Counter	read-only	The router received an instance of one of its self-originated advertisements that is considered to be more recent.
CTR ospfErrLsupdLessRecentLsa	1.3.6.1.4.1.272.4.5.11.23	Counter	read-only	The router received an instance of an advertisement that is considered to be less recent than the database copy.

RFC description

BIANCA/BRICK router MIB for OSPF (Open Shortest Path First) routing protocol management based on RFC 1850. Provides SNMP objects for monitoring OSPF topology, neighbor relationships, and dynamic routing operations on BIANCA/BRICK industrial routers.

Start monitoring bintec BIANCA/BRICK ISDN/VPN routers (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BIANCA-BRICK-OSPF-MIB

What Is BIANCA-BRICK-OSPF-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description