HUAWEI-EPON-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › HUAWEI-EPON-MIB

Organization: Research & Development Dept, AN, Huawei Technologies Co.,Ltd.

Last Updated: 2009-04-24

Category: Technology: EPON/PON, Vendor: Huawei

Description: Huawei EPON (Ethernet Passive Optical Network) MIB for managing OLT and ONU devices, PON port configuration, and EPON service provisioning.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-EPON-MIB?

HUAWEI-EPON-MIB is a Huawei MIB for managing Ethernet Passive Optical Network (EPON) infrastructure, covering the OLT (Optical Line Terminal) and ONU (Optical Network Unit) devices, PON port configuration, and EPON service provisioning. No module description or sample objects were available in this excerpt, so specific object/table names cannot be confirmed, but consistent with EPON management practice it would be expected to expose ONU registration/status, optical PON port parameters, and per-service provisioning bindings. Its monitoring relevance would center on ONU online/offline status, optical signal levels on PON ports, and provisioning state — hardware/link-health data analogous to how other access-network MIBs reveal a failing or unregistered subscriber optical unit — though this cannot be grounded in specific object names here. It would likely depend on general PON/GPON-style conventions and Huawei's broader access-network MIB family rather than a single IETF standard, since EPON management is largely vendor-defined. It is deployed on Huawei OLT chassis and associated ONUs in fiber-to-the-home/business access networks operated by broadband service providers. Engineers can download the HUAWEI-EPON-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-EPON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Huawei EPON OLT
  • Huawei EPON ONU

Monitoring Examples

Without sample objects available in this excerpt, a concrete polling scenario grounded in real object names cannot be given; in general EPON practice an operator would expect to poll an ONU status table for online/offline state and optical receive power per PON port to detect a fiber fault or a subscriber ONU going dark, but this cannot be confirmed against actual object names from this data.

Imported Objects

From HUAWEI-MIB

huaweiUtilityOBJECT-IDENTITY
hwDatacommOBJECT-IDENTITY

From IF-MIB

ifIndexOBJECT-TYPE

From P-BRIDGE-MIB

EnabledStatus

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION
OIDs

RFC description

Manages Ethernet Passive Optical Network (EPON) device configuration and statistics.

Start monitoring Huawei EPON OLT/ONU equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-EPON-MIB