HUAWEI-CLOCK-MIB

All MIBs › HUAWEI-CLOCK-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2014-11-29

Category: Technology: Time Synchronization, Vendor: Huawei

Description: Huawei clock management MIB for configuring real-time clock settings, system time synchronization, and hardware clock parameters on Huawei devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-CLOCK-MIB?

HUAWEI-CLOCK-MIB is a Huawei private MIB for managing device clock and time-synchronization settings, including support for the 1588 (Precision Time Protocol) interface used in telecom-grade timing distribution. It exposes objects for configuring the system's real-time clock, time source, and PTP-related interface parameters. From a monitoring standpoint, it is used to track whether the device's clock is synchronized to its configured time source and whether the 1588 interface is functioning, which matters for time-sensitive applications like billing, event correlation, and TDM/mobile-backhaul synchronization. It likely complements standard time-related MIBs and may interact with interface MIBs for the physical port carrying PTP traffic. It is deployed on Huawei routers, switches, or mobile-backhaul transport equipment where accurate, synchronized time is required across the network. Network engineers evaluating or troubleshooting this functionality can download the HUAWEI-CLOCK-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-CLOCK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei routers, switches, and mobile-backhaul transport equipment

Monitoring Examples

An operator would check the clock source/synchronization status object to confirm the device is locked to its intended reference clock rather than free-running, and inspect 1588/PTP interface parameters to verify the timing interface is enabled and passing sync messages. A device reporting an unsynchronized or free-run clock state would indicate a lost timing reference, which could disrupt time-sensitive services like mobile backhaul frame timing. This MIB gives visibility into the software-managed timing subsystem's health.

What Can Be Monitored

clock synchronization status
configured time source
1588/PTP interface status
real-time clock configuration

Imported Objects

From ENTITY-MIB

PhysicalIndex

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From P-BRIDGE-MIB

EnabledStatus

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwClockMIB	1.3.6.1.4.1.2011.5.25.186			The MIB contains objects of module clock management and 1588 interface.
hwClockManageObjects	1.3.6.1.4.1.2011.5.25.186.1
hwClockGlobalObjects	1.3.6.1.4.1.2011.5.25.186.1.1
ENA hwClockSourceEthClkEnable	1.3.6.1.4.1.2011.5.25.186.1.1.1	EnabledStatus	read-write	The flag indicates that the ethernet clock is globally enabled.
INT hwClockSourceSsmUnknown	1.3.6.1.4.1.2011.5.25.186.1.1.2	INTEGER	read-write	The quality level of unknown SSM.
INT hwClockSourceSysClkWorkMode	1.3.6.1.4.1.2011.5.25.186.1.1.3	INTEGER	read-only	The work mode of system clock.
ENA hwClockSourceForceCloseEnableStatus	1.3.6.1.4.1.2011.5.25.186.1.1.4	EnabledStatus	read-write	The enable status of export forced close.
INT hwClockSourceSsmControl	1.3.6.1.4.1.2011.5.25.186.1.1.5	INTEGER	read-write	The flag whether SSM is concerned with the clock source selection.
INT hwClockSourceHoldMode	1.3.6.1.4.1.2011.5.25.186.1.1.6	INTEGER	read-only	The hold mode of clock source.
ENA hwClockSourceFreqCheckEnable	1.3.6.1.4.1.2011.5.25.186.1.1.7	EnabledStatus	read-write	The enable flag of frequency check.
I32 hwClockSourceFreqCheckLeftRange	1.3.6.1.4.1.2011.5.25.186.1.1.8	Integer32	read-write	The left range of frequency check, unit in 0.01ppm.
I32 hwClockSourceFreqCheckRightRange	1.3.6.1.4.1.2011.5.25.186.1.1.9	Integer32	read-write	The right range of frequency check, unit in 0.01ppm.
INT hwClockSourceRetrieveMode	1.3.6.1.4.1.2011.5.25.186.1.1.10	INTEGER	read-write	The retrieve mode of clock source.
INT hwClockTimeUsedSource	1.3.6.1.4.1.2011.5.25.186.1.1.11	INTEGER	read-write	The clock time used source.
INT hwClockExtTimeInputType	1.3.6.1.4.1.2011.5.25.186.1.1.12	INTEGER	read-write	The input time type of clock extern time.
INT hwClockExtTimeOutputType	1.3.6.1.4.1.2011.5.25.186.1.1.13	INTEGER	read-write	The output time type of clock extern time.
I32 hwClockAlarmThresholdFrequencyOffset	1.3.6.1.4.1.2011.5.25.186.1.1.14	Integer32	read-write	The Threshold of clock alarm.
I32 hwClockFrequencyOffsetMax	1.3.6.1.4.1.2011.5.25.186.1.1.15	Integer32	read-only	The max offset of clock frequency.
I32 hwClockFrequencyOffsetMin	1.3.6.1.4.1.2011.5.25.186.1.1.16	Integer32	read-only	The min offset of clock frequency.
I32 hwClockFrequencyOffsetMean	1.3.6.1.4.1.2011.5.25.186.1.1.17	Integer32	read-only	The mean offset of clock frequency.
I32 hwClockFrequencyOffset	1.3.6.1.4.1.2011.5.25.186.1.1.18	Integer32	read-only	The current offset of clock frequency.
hwClockSourceSelTable	1.3.6.1.4.1.2011.5.25.186.1.2		not-accessible	The system clock source selection table.
hwClockSourceSelEntry	1.3.6.1.4.1.2011.5.25.186.1.2.1		not-accessible	The entry of system clock source selection table.
PHY hwClockSourceSelChassisIndex	1.3.6.1.4.1.2011.5.25.186.1.2.1.1	PhysicalIndex	not-accessible	The chassis index.
I32 hwClockSourceSelType	1.3.6.1.4.1.2011.5.25.186.1.2.1.2	Integer32	not-accessible	The select type.
INT hwClockSourceSelMode	1.3.6.1.4.1.2011.5.25.186.1.2.1.3	INTEGER	read-create	The mode of clock source selection.
I32 hwClockSourceSelSourceId	1.3.6.1.4.1.2011.5.25.186.1.2.1.4	Integer32	read-create	The source ID of the clock traced.
hwClockSourceCfgTable	1.3.6.1.4.1.2011.5.25.186.1.3		not-accessible	The clock source config table.
hwClockSourceCfgEntry	1.3.6.1.4.1.2011.5.25.186.1.3.1		not-accessible	The entry of clock source config table.
PHY hwClockCfgChassisIndex	1.3.6.1.4.1.2011.5.25.186.1.3.1.1	PhysicalIndex	not-accessible	The index of the chassis whitch the clock source belongs to.
I32 hwClockCfgSourceIndex	1.3.6.1.4.1.2011.5.25.186.1.3.1.2	Integer32	not-accessible	The clock source index.
I32 hwClockCfgSourceId	1.3.6.1.4.1.2011.5.25.186.1.3.1.3	Integer32	read-only	The clock source ID.
OCT hwClockCfgSourceDescr	1.3.6.1.4.1.2011.5.25.186.1.3.1.4	OCTET STRING	read-only	The clock source description.
I32 hwClockCfgWtrTime	1.3.6.1.4.1.2011.5.25.186.1.3.1.5	Integer32	read-write	The waiting for restore time of clock source.
ENA hwClockCfgBadDetect	1.3.6.1.4.1.2011.5.25.186.1.3.1.6	EnabledStatus	read-write	The enable status of clock source bad detecting.
I32 hwClockCfgSystemPriority	1.3.6.1.4.1.2011.5.25.186.1.3.1.7	Integer32	read-write	The priority of system clock source.
I32 hwClockCfgBits0Priority	1.3.6.1.4.1.2011.5.25.186.1.3.1.8	Integer32	read-write	The priority of BITS0 clock source.
I32 hwClockCfgBits1Priority	1.3.6.1.4.1.2011.5.25.186.1.3.1.9	Integer32	read-write	The priority of BITS1 clock source.
I32 hwClockCfgSystemLockOut	1.3.6.1.4.1.2011.5.25.186.1.3.1.10	Integer32	read-write	The lock out of system clock source.
I32 hwClockCfgBits0LockOut	1.3.6.1.4.1.2011.5.25.186.1.3.1.11	Integer32	read-write	The lock out of BITS0 clock source.
I32 hwClockCfgBits1LockOut	1.3.6.1.4.1.2011.5.25.186.1.3.1.12	Integer32	read-write	The lock out of BITS1 clock source.
INT hwClockCfgSourceSsm	1.3.6.1.4.1.2011.5.25.186.1.3.1.13	INTEGER	read-write	The SSM quality of clock source.
INT hwClockCfgSourceSsmSetMode	1.3.6.1.4.1.2011.5.25.186.1.3.1.14	INTEGER	read-write	The set mode of SSM.
ENA hwClockCfgExportEnableStatus	1.3.6.1.4.1.2011.5.25.186.1.3.1.15	EnabledStatus	read-write	The enable status of clock source export.
ENA hwClockCfgSwiEnableStatus	1.3.6.1.4.1.2011.5.25.186.1.3.1.16	EnabledStatus	read-write	he enable status of clock source switch.
INT hwClockCfgSourceState	1.3.6.1.4.1.2011.5.25.186.1.3.1.17	INTEGER	read-write	The state of clock source.
INT hwClockCfgSsmThreshold	1.3.6.1.4.1.2011.5.25.186.1.3.1.18	INTEGER	read-write	The SSM quality level threshold of clock source.
I32 hwClockCfgSourceS1Id	1.3.6.1.4.1.2011.5.25.186.1.3.1.19	Integer32	read-only	The S1 byte of the clock.
I32 hwClockCfgFreqCheckResult	1.3.6.1.4.1.2011.5.25.186.1.3.1.20	Integer32	read-write	The result of frequency check, unit in 0.01ppm.
I32 hwClockCfgHoldOffTime	1.3.6.1.4.1.2011.5.25.186.1.3.1.21	Integer32	read-write	The hold off time of clock, unit in 100ms.
ENA hwClockCfgPriRvtEnableStatus	1.3.6.1.4.1.2011.5.25.186.1.3.1.22	EnabledStatus	read-write	The enable status of switch according priority.
INT hwClockCfgSwitchCondition	1.3.6.1.4.1.2011.5.25.186.1.3.1.23	INTEGER	read-write	The condition of clock switch.
INT hwClockCfgClkSourceType	1.3.6.1.4.1.2011.5.25.186.1.3.1.24	INTEGER	read-only	The type of clock source.
hwClockBitsCfgTable	1.3.6.1.4.1.2011.5.25.186.1.4		not-accessible	The clock bits congfig table.
hwClockBitsCfgEntry	1.3.6.1.4.1.2011.5.25.186.1.4.1		not-accessible	The entry of clock bits congfig table.
PHY hwClockBitsCfgChassisIndex	1.3.6.1.4.1.2011.5.25.186.1.4.1.1	PhysicalIndex	not-accessible	The index of the chassis whitch the clock source belongs to.
I32 hwClockBitsCfgBitsIndex	1.3.6.1.4.1.2011.5.25.186.1.4.1.2	Integer32	not-accessible	The index of BITS clock.
OCT hwClockBitsCfgName	1.3.6.1.4.1.2011.5.25.186.1.4.1.3	OCTET STRING	read-only	The name of clock.
INT hwClockBitsCfgBitsPortType	1.3.6.1.4.1.2011.5.25.186.1.4.1.4	INTEGER	read-only	The BITS port type.
INT hwClockBitsCfgBitsType	1.3.6.1.4.1.2011.5.25.186.1.4.1.5	INTEGER	read-write	The BITS type.
INT hwClockBitsCfgDirection	1.3.6.1.4.1.2011.5.25.186.1.4.1.6	INTEGER	read-write	The direction of BITS.
INT hwClockBitsCfgRecvSaBit	1.3.6.1.4.1.2011.5.25.186.1.4.1.7	INTEGER	read-write	The received SA bit.
INT hwClockBitsCfgSendSaBit	1.3.6.1.4.1.2011.5.25.186.1.4.1.8	INTEGER	read-write	The sent SA bit.
INT hwClockBitsCfgForceOutS1	1.3.6.1.4.1.2011.5.25.186.1.4.1.9	INTEGER	read-write	The S1 byte of forcing out.
INT hwClockBitsCfgSaBit	1.3.6.1.4.1.2011.5.25.186.1.4.1.10	INTEGER	read-write	The SA bit of SSM information.
INT hwClockBitsCfgInputMode	1.3.6.1.4.1.2011.5.25.186.1.4.1.11	INTEGER	read-write	The input mode of clock source.
INT hwClockBitsCfgOutputMode	1.3.6.1.4.1.2011.5.25.186.1.4.1.12	INTEGER	read-write	The output mode of clock source.
INT hwClockBitsCfgInvalidCond	1.3.6.1.4.1.2011.5.25.186.1.4.1.13	INTEGER	read-write	The invalid condition of clock source.
I32 hwClockBitsCfgSourceId	1.3.6.1.4.1.2011.5.25.186.1.4.1.14	Integer32	read-only	The clock source ID.
INT hwClockBitsCfgTodSignal	1.3.6.1.4.1.2011.5.25.186.1.4.1.15	INTEGER	read-write	The tod signal of clock source.
INT hwClockBitsCfgFrameFormat	1.3.6.1.4.1.2011.5.25.186.1.4.1.16	INTEGER	read-write	Encoding type and frame check format of the extern clock port.
hwClockPortCfgTable	1.3.6.1.4.1.2011.5.25.186.1.5		not-accessible	The clock port config table.
hwClockPortCfgEntry	1.3.6.1.4.1.2011.5.25.186.1.5.1		not-accessible	The entry of clock port config table.
NUM hwClockPortCfgIfIndex	1.3.6.1.4.1.2011.5.25.186.1.5.1.1	InterfaceIndex	not-accessible	The interface index.
I32 hwClockPortCfgLeftFramePri	1.3.6.1.4.1.2011.5.25.186.1.5.1.2	Integer32	read-write	The clock priority of left frame.
I32 hwClockPortCfgRightFramePri	1.3.6.1.4.1.2011.5.25.186.1.5.1.3	Integer32	read-write	The clock priority of right frame.
I32 hwClockPortCfgForceOutS1	1.3.6.1.4.1.2011.5.25.186.1.5.1.4	Integer32	read-write	The S1 byte of forcing out.
hwClockLineClkCfgTable	1.3.6.1.4.1.2011.5.25.186.1.6		not-accessible	The line clock config table.
hwClockLineClkCfgEntry	1.3.6.1.4.1.2011.5.25.186.1.6.1		not-accessible	The entry of line clock config table.
PHY hwClockLineClkCfgChassisIndex	1.3.6.1.4.1.2011.5.25.186.1.6.1.1	PhysicalIndex	not-accessible	The chassis index.
I32 hwClockLineClkCfgSlotIndex	1.3.6.1.4.1.2011.5.25.186.1.6.1.2	Integer32	not-accessible	The slot index of the line clock.
I32 hwClockLineClkCfgCardId	1.3.6.1.4.1.2011.5.25.186.1.6.1.3	Integer32	read-create	The card index witch is seleced to provide line clock.
I32 hwClockLineClkCfgPortId	1.3.6.1.4.1.2011.5.25.186.1.6.1.4	Integer32	read-create	The port index witch is seleced to provide line clock.
I32 hwClockLineClkCfgRecvS1	1.3.6.1.4.1.2011.5.25.186.1.6.1.5	Integer32	read-only	The S1 byte value received.
I32 hwClockLineClkCfgSendS1	1.3.6.1.4.1.2011.5.25.186.1.6.1.6	Integer32	read-create	The S1 byte value sent.
I32 hwClockLineCfgSoureId	1.3.6.1.4.1.2011.5.25.186.1.6.1.7	Integer32	read-create	Description.
hwClockTrapOid	1.3.6.1.4.1.2011.5.25.186.1.7
OCT hwClockLastSourceName	1.3.6.1.4.1.2011.5.25.186.1.7.1	OCTET STRING	accessible-for-notify	The last clock source name.
OCT hwClockCurSourceName	1.3.6.1.4.1.2011.5.25.186.1.7.2	OCTET STRING	accessible-for-notify	The current clock source name.
INT hwClockSourceOldLockMode	1.3.6.1.4.1.2011.5.25.186.1.7.3	INTEGER	accessible-for-notify	The old lock mode of clock source.
I32 hwClockChassisId	1.3.6.1.4.1.2011.5.25.186.1.7.4	Integer32	accessible-for-notify	The chassis ID.
INT hwClockOldSourceState	1.3.6.1.4.1.2011.5.25.186.1.7.5	INTEGER	accessible-for-notify	The old state of clock source.
INT hwClockPllId	1.3.6.1.4.1.2011.5.25.186.1.7.6	INTEGER	accessible-for-notify	The id of pll.
INT hwClockAttributeOutValue	1.3.6.1.4.1.2011.5.25.186.1.7.7	INTEGER	accessible-for-notify	The current output value.
I32 hwClockCesAcrSlot	1.3.6.1.4.1.2011.5.25.186.1.7.8	Integer32	accessible-for-notify	The slot ID of CES ACR clock source.
I32 hwClockCesAcrCard	1.3.6.1.4.1.2011.5.25.186.1.7.9	Integer32	accessible-for-notify	The card ID of CES ACR clock source.
I32 hwClockCesAcrDomain	1.3.6.1.4.1.2011.5.25.186.1.7.10	Integer32	accessible-for-notify	The recovery domain value of CES ACR clock source.
OCT hwClockCesAcrOldMasterPwName	1.3.6.1.4.1.2011.5.25.186.1.7.11	OCTET STRING	accessible-for-notify	The master pw SerialPort name of CES ACR old clock source.
OCT hwClockCesAcrNewMasterPwName	1.3.6.1.4.1.2011.5.25.186.1.7.12	OCTET STRING	accessible-for-notify	The master pw SerialPort name of CES ACR new clock source.
I32 hwClockCesAcrLockState	1.3.6.1.4.1.2011.5.25.186.1.7.13	Integer32	accessible-for-notify	The lock state of the CES ACR.
I32 hwClockCesDcrSlot	1.3.6.1.4.1.2011.5.25.186.1.7.14	Integer32	accessible-for-notify	The slot ID of CES DCR clock source.
I32 hwClockCesDcrCard	1.3.6.1.4.1.2011.5.25.186.1.7.15	Integer32	accessible-for-notify	The card ID of CES DCR clock source.
I32 hwClockCesDcrDomain	1.3.6.1.4.1.2011.5.25.186.1.7.16	Integer32	accessible-for-notify	The recovery domain value of CES DCR clock source.
OCT hwClockCesDcrOldMasterPwName	1.3.6.1.4.1.2011.5.25.186.1.7.17	OCTET STRING	accessible-for-notify	The master pw SerialPort name of CES DCR old clock source.
OCT hwClockCesDcrNewMasterPwName	1.3.6.1.4.1.2011.5.25.186.1.7.18	OCTET STRING	accessible-for-notify	The master pw SerialPort name of CES DCR new clock source.
I32 hwClockCesDcrLockState	1.3.6.1.4.1.2011.5.25.186.1.7.19	Integer32	accessible-for-notify	The lock state of the CES DCR.
hwClockNotifications	1.3.6.1.4.1.2011.5.25.186.1.8
NTF hwClockSourceSwitch	1.3.6.1.4.1.2011.5.25.186.1.8.1			Clock source switch notification.
NTF hwClockSourceSysClkLockModeChange	1.3.6.1.4.1.2011.5.25.186.1.8.2			The lock mode of system clock source change notification.
NTF hwClockSourceStateChange	1.3.6.1.4.1.2011.5.25.186.1.8.3			The state of clock source change notification.
NTF hwClockSourceStateResume	1.3.6.1.4.1.2011.5.25.186.1.8.4			The state of clock source resume notification.
NTF hwClockSourceFreqCheck	1.3.6.1.4.1.2011.5.25.186.1.8.5			The result of clock source frequnce check abnormal notification.
NTF hwClockSourceOutputBelowThreshold	1.3.6.1.4.1.2011.5.25.186.1.8.6			The SSM of output below threshold notification.
NTF hwClockNotInLockedMode	1.3.6.1.4.1.2011.5.25.186.1.8.7			The work mode of system clock is not in locked mode.
NTF hwClockInLockedMode	1.3.6.1.4.1.2011.5.25.186.1.8.8			The work mode of system clock is in locked mode.
NTF hwClockSourceFailed	1.3.6.1.4.1.2011.5.25.186.1.8.11			The state of clock source is failed.
NTF hwClockSourceValid	1.3.6.1.4.1.2011.5.25.186.1.8.12			The state of clock source is valid.
NTF hwClockSourceFreqCheckResume	1.3.6.1.4.1.2011.5.25.186.1.8.13			The result of clock source frequnce check normal notification.
NTF hwClockSourceOutputBelowThresholdResume	1.3.6.1.4.1.2011.5.25.186.1.8.14			The SSM of output above threshold notification.
NTF hwClockCesAcrMasterPwChange	1.3.6.1.4.1.2011.5.25.186.1.8.15			CES ACR master PW status change.
NTF hwClockCesAcrLockFail	1.3.6.1.4.1.2011.5.25.186.1.8.16			CES ACR clock source lock fail.
NTF hwClockCesAcrLockFailResume	1.3.6.1.4.1.2011.5.25.186.1.8.17			CES ACR clock source lock fail resume.
NTF hwClockClusterTopoFail	1.3.6.1.4.1.2011.5.25.186.1.8.22			Clock cluster inter-chassis synchronization topo compute failed.
NTF hwClockClusterTopoFailResume	1.3.6.1.4.1.2011.5.25.186.1.8.23			Clock inter-chassis synchronization topo compute successfully.
NTF hwClockSourceInputBelowThreshold	1.3.6.1.4.1.2011.5.25.186.1.8.24			The SSM of input below threshold notification.
NTF hwClockSourceInputBelowThresholdResume	1.3.6.1.4.1.2011.5.25.186.1.8.25			The SSM of input above or equal threshold notification.
NTF hwClockSsmPktLos	1.3.6.1.4.1.2011.5.25.186.1.8.26			The ssm packet of clock source is lost.
NTF hwClockSsmPktLosResume	1.3.6.1.4.1.2011.5.25.186.1.8.27			The ssm packet of clock source is normal.
NTF hwClockCesDcrMasterPwChange	1.3.6.1.4.1.2011.5.25.186.1.8.28			CES DCR master PW status change.
NTF hwClockCesDcrLockFail	1.3.6.1.4.1.2011.5.25.186.1.8.29			CES DCR clock source lock fail.
NTF hwClockCesDcrLockFailResume	1.3.6.1.4.1.2011.5.25.186.1.8.30			CES DCR clock source lock fail resume.
hwClockAttributeTable	1.3.6.1.4.1.2011.5.25.186.1.9		not-accessible	The clock Attribute table.
hwClockAttributeEntry	1.3.6.1.4.1.2011.5.25.186.1.9.1		not-accessible	The entry of clock Attribute table.
PHY hwClockAttributeChassisIndex	1.3.6.1.4.1.2011.5.25.186.1.9.1.1	PhysicalIndex	not-accessible	The chassis index.
INT hwClockAttributeSysClkRunMode	1.3.6.1.4.1.2011.5.25.186.1.9.1.2	INTEGER	read-write	The run mode of system clock.
INT hwClockAttributeSsmControl	1.3.6.1.4.1.2011.5.25.186.1.9.1.3	INTEGER	read-write	The flag whether SSM is concerned with the clock source selection.
ENA hwClockAttributeFreqCheckEnable	1.3.6.1.4.1.2011.5.25.186.1.9.1.4	EnabledStatus	read-write	The enable flag of frequency check.
INT hwClockAttributeRetrieveMode	1.3.6.1.4.1.2011.5.25.186.1.9.1.5	INTEGER	read-write	The retrieve mode of system clock.
I32 hwClockAttributeWtrTime	1.3.6.1.4.1.2011.5.25.186.1.9.1.6	Integer32	read-write	The time waiting for retrieve.
I32 hwClockAttributeHoldOffTime	1.3.6.1.4.1.2011.5.25.186.1.9.1.7	Integer32	read-write	The holdoff-time when the system source is lost.
INT hwClockAttributeOutThreshold	1.3.6.1.4.1.2011.5.25.186.1.9.1.8	INTEGER	read-write	The Threshold of out put.
INT hwClockAttributeSysMaxOutSsm	1.3.6.1.4.1.2011.5.25.186.1.9.1.9	INTEGER	read-write	The max ssm of system out put.
INT hwClockAttribute2M1MaxOutSsm	1.3.6.1.4.1.2011.5.25.186.1.9.1.10	INTEGER	read-write	The max ssm of 2msync-1 out put.
INT hwClockAttribute2M2MaxOutSsm	1.3.6.1.4.1.2011.5.25.186.1.9.1.11	INTEGER	read-write	The max ssm of 2msync-2 out put.
INT hwClockAttributeSysClkLockMode	1.3.6.1.4.1.2011.5.25.186.1.9.1.12	INTEGER	read-only	The Lock mode of system clock.
INT hwClockAttributeExtendSsmControl	1.3.6.1.4.1.2011.5.25.186.1.9.1.13	INTEGER	read-write	The flag whether Extend SSM is concerned with the clock source selection.
I32 hwClockAttributeInternalClockId	1.3.6.1.4.1.2011.5.25.186.1.9.1.14	Integer32	read-write	The internal clockid of the device.
INT hwClockAttributeTodProtocol	1.3.6.1.4.1.2011.5.25.186.1.9.1.15	INTEGER	read-write	1pps bits tod protocol.
ENA hwClockAttributeLtiSquelch	1.3.6.1.4.1.2011.5.25.186.1.9.1.16	EnabledStatus	read-write	The frequency signal output squelch flag upon the frequency loss.
INT hwClockAttributeInputThreshold	1.3.6.1.4.1.2011.5.25.186.1.9.1.17	INTEGER	read-write	The squelch threshold of the external input source.
hwClockSrcSelTable	1.3.6.1.4.1.2011.5.25.186.1.10		not-accessible	The system clock source selection table.
hwClockSrcSelEntry	1.3.6.1.4.1.2011.5.25.186.1.10.1		not-accessible	The entry of system clock source selection table.
PHY hwClockSrcSelChassisIndex	1.3.6.1.4.1.2011.5.25.186.1.10.1.1	PhysicalIndex	not-accessible	The chassis index.
INT hwClockSrcSelType	1.3.6.1.4.1.2011.5.25.186.1.10.1.2	INTEGER	not-accessible	The PLL Id.
INT hwClockSrcSelMode	1.3.6.1.4.1.2011.5.25.186.1.10.1.3	INTEGER	read-write	The mode of clock source selection.
OCT hwClockSrcSelSrcName	1.3.6.1.4.1.2011.5.25.186.1.10.1.4	OCTET STRING	read-write	The name of clock source for selection.
OCT hwClockSrcTraceSrcName	1.3.6.1.4.1.2011.5.25.186.1.10.1.5	OCTET STRING	read-only	The name of trace source.
hwClockSrcCfgTable	1.3.6.1.4.1.2011.5.25.186.1.11		not-accessible	The clock source config table.
hwClockSrcCfgEntry	1.3.6.1.4.1.2011.5.25.186.1.11.1		not-accessible	The entry of clock source config table.
PHY hwClockSrcCfgChassisIndex	1.3.6.1.4.1.2011.5.25.186.1.11.1.1	PhysicalIndex	not-accessible	The chassis index.
INT hwClockSrcCfgSourceTypeIndex	1.3.6.1.4.1.2011.5.25.186.1.11.1.2	INTEGER	accessible-for-notify	The type of clock source.
I32 hwClockSrcCfgSourceIndex	1.3.6.1.4.1.2011.5.25.186.1.11.1.3	Integer32	not-accessible	The index of clock source.
OCT hwClockSrcCfgSourceDescr	1.3.6.1.4.1.2011.5.25.186.1.11.1.4	OCTET STRING	read-only	The description of clock source.
ENA hwClockSrcCfgClkEnable	1.3.6.1.4.1.2011.5.25.186.1.11.1.5	EnabledStatus	read-create	The enable flag of clock source.
I32 hwClockSrcCfgSystemPriority	1.3.6.1.4.1.2011.5.25.186.1.11.1.6	Integer32	read-create	The priority of system clock source.
I32 hwClockSrcCfg2M1Priority	1.3.6.1.4.1.2011.5.25.186.1.11.1.7	Integer32	read-create	The priority of 2msync-1 clock source.
I32 hwClockSrcCfg2M2Priority	1.3.6.1.4.1.2011.5.25.186.1.11.1.8	Integer32	read-create	The priority of 2msync-2 clock source.
INT hwClockSrcCfgSourceSsm	1.3.6.1.4.1.2011.5.25.186.1.11.1.9	INTEGER	read-create	The SSM quality of clock source.
INT hwClockSrcCfgSsmSetMode	1.3.6.1.4.1.2011.5.25.186.1.11.1.10	INTEGER	read-only	The set mode of SSM.
INT hwClockSrcCfgSourceState	1.3.6.1.4.1.2011.5.25.186.1.11.1.11	INTEGER	read-only	The state of clock source.
INT hwClockSrcCfgFreqCheckResult	1.3.6.1.4.1.2011.5.25.186.1.11.1.12	INTEGER	read-only	The result of frequency check.
I32 hwClockSrcCfgSsmInterval	1.3.6.1.4.1.2011.5.25.186.1.11.1.13	Integer32	read-create	Description.
I32 hwClockSrcCfgSsmTimeout	1.3.6.1.4.1.2011.5.25.186.1.11.1.14	Integer32	read-create	Description.
INT hwClockSrcCfgSabit	1.3.6.1.4.1.2011.5.25.186.1.11.1.15	INTEGER	read-write	The SA bit of E1 Port SSM information.
I32 hwClockSrcCfgClockId	1.3.6.1.4.1.2011.5.25.186.1.11.1.16	Integer32	read-write	The clockid of clock source.
INT hwClockSrcCfgClockIdSetMode	1.3.6.1.4.1.2011.5.25.186.1.11.1.17	INTEGER	read-only	The set mode of clockid.
INT hwClockSrcCfgOutSsm	1.3.6.1.4.1.2011.5.25.186.1.11.1.18	INTEGER	read-only	Current output ssm.
INT hwClockSrcCfgOutClockId	1.3.6.1.4.1.2011.5.25.186.1.11.1.19	INTEGER	read-only	Current output clockid.
ROW hwClockSrcCfgRowStatus	1.3.6.1.4.1.2011.5.25.186.1.11.1.20	RowStatus	read-create	The row status.
OCT hwClockSrcCfgFreqDeviation	1.3.6.1.4.1.2011.5.25.186.1.11.1.21	OCTET STRING	read-only	Freqdeviation value of clock source.
INT hwClockSrcCfgPhyState	1.3.6.1.4.1.2011.5.25.186.1.11.1.22	INTEGER	read-only	The PHY clock state of ports.
INT hwClockSrcCfgNegotiationSlave	1.3.6.1.4.1.2011.5.25.186.1.11.1.23	INTEGER	read-create	Set PHY clock state to slave.
hwClockCesAcrPortCfgTable	1.3.6.1.4.1.2011.5.25.186.1.12		not-accessible	The CES ACR clock port config table.
hwClockCesAcrPortCfgEntry	1.3.6.1.4.1.2011.5.25.186.1.12.1		not-accessible	The entry of CES ACR clock port config table.
NUM hwClockCesAcrParentIfIndex	1.3.6.1.4.1.2011.5.25.186.1.12.1.1	InterfaceIndex	not-accessible	Indicates the index of the parent interface.
I32 hwClockCesAcrChannelId	1.3.6.1.4.1.2011.5.25.186.1.12.1.2	Integer32	not-accessible	Indicates the channel ID.
NUM hwClockCesAcrIfIndex	1.3.6.1.4.1.2011.5.25.186.1.12.1.3	InterfaceIndex	not-accessible	Indicates the interface index.
OCT hwClockCesAcrPortName	1.3.6.1.4.1.2011.5.25.186.1.12.1.4	OCTET STRING	read-only	Port name.
INT hwClockCesAcrChannelType	1.3.6.1.4.1.2011.5.25.186.1.12.1.5	INTEGER	read-create	Indicates the interface type. The type can be E1/CE1 or T1/CT1.
INT hwClockCesAcrSourceMode	1.3.6.1.4.1.2011.5.25.186.1.12.1.6	INTEGER	read-create	Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal. recovery-domain: indicates that the clock works in slave mode and uses the recovery domain clock signal.
I32 hwClockCesAcrRecoveryDomain	1.3.6.1.4.1.2011.5.25.186.1.12.1.7	Integer32	read-create	Indicates the clock recovery domain of the interface. DEFVAL is 0.
I32 hwClockCesAcrPwDomain	1.3.6.1.4.1.2011.5.25.186.1.12.1.8	Integer32	read-create	Indicates the clock PW domain of the interface. DEFVAL is 0.
ROW hwClockCesAcrPortCfgRowStatus	1.3.6.1.4.1.2011.5.25.186.1.12.1.9	RowStatus	read-create	The row status.
I32 hwClockCesAcrMasterDomain	1.3.6.1.4.1.2011.5.25.186.1.12.1.10	Integer32	read-create	Indicates the clock master domain of the interface. DEFVAL is 0.
INT hwClockCesMode	1.3.6.1.4.1.2011.5.25.186.1.12.1.11	INTEGER	read-create	Indicates the clock CES recovery mode of the interface. DEFVAL is 0.
hwClockCesAcrCfgTable	1.3.6.1.4.1.2011.5.25.186.1.13		not-accessible	The CES ACR clock source config table.
hwClockCesAcrCfgEntry	1.3.6.1.4.1.2011.5.25.186.1.13.1		not-accessible	The entry of CES ACR clock source config table.
I32 hwClockCesAcrCfgSlot	1.3.6.1.4.1.2011.5.25.186.1.13.1.1	Integer32	not-accessible	The slot ID of CES ACR clock source.
I32 hwClockCesAcrCfgCard	1.3.6.1.4.1.2011.5.25.186.1.13.1.2	Integer32	not-accessible	The card ID of CES ACR clock source.
I32 hwClockCesAcrCfgDomain	1.3.6.1.4.1.2011.5.25.186.1.13.1.3	Integer32	not-accessible	The recovery domain value of CES ACR clock source.
OCT hwClockCesAcrCfgDescr	1.3.6.1.4.1.2011.5.25.186.1.13.1.4	OCTET STRING	read-only	The description of clock source.
ENA hwClockCesAcrCfgSyncEnable	1.3.6.1.4.1.2011.5.25.186.1.13.1.5	EnabledStatus	read-create	The enable flag of CES ACR clock source.
I32 hwClockCesAcrCfgSystemPriority	1.3.6.1.4.1.2011.5.25.186.1.13.1.6	Integer32	read-create	The priority of system CES ACR clock source. DEFVAL is 0.
INT hwClockCesAcrCfgSsm	1.3.6.1.4.1.2011.5.25.186.1.13.1.7	INTEGER	read-create	The SSM quality of CES ACR clock source.
I32 hwClockCesAcrCfgClockId	1.3.6.1.4.1.2011.5.25.186.1.13.1.8	Integer32	read-create	The clockid of clock source. DEFVAL is 0.
INT hwClockCesAcrCfgSourceState	1.3.6.1.4.1.2011.5.25.186.1.13.1.9	INTEGER	read-only	The state of CES ACR clock source.
INT hwClockCesAcrCfgFreqCheckResult	1.3.6.1.4.1.2011.5.25.186.1.13.1.10	INTEGER	read-only	The result of CES ACR clock source frequency check.
ROW hwClockCesAcrCfgRowStatus	1.3.6.1.4.1.2011.5.25.186.1.13.1.11	RowStatus	read-create	The row status.
hwClockCesAcrDomainInfoTable	1.3.6.1.4.1.2011.5.25.186.1.14		not-accessible	The CES ACR domain infomation table.
hwClockCesAcrDomainInfoEntry	1.3.6.1.4.1.2011.5.25.186.1.14.1		not-accessible	The entry of CES ACR domain infomation table.
I32 hwClockCesAcrDomianInfoSlot	1.3.6.1.4.1.2011.5.25.186.1.14.1.1	Integer32	not-accessible	The slot ID of CES ACR clock source.
I32 hwClockCesAcrDomianInfoCard	1.3.6.1.4.1.2011.5.25.186.1.14.1.2	Integer32	not-accessible	The card ID of CES ACR clock source.
I32 hwClockCesAcrDomianInfoDomain	1.3.6.1.4.1.2011.5.25.186.1.14.1.3	Integer32	not-accessible	The recovery domain value of CES ACR clock source.
OCT hwClockCesAcrDomianInfoMasterPwName	1.3.6.1.4.1.2011.5.25.186.1.14.1.4	OCTET STRING	read-only	Port name.
I32 hwClockCesAcrDomianInfoChannelId	1.3.6.1.4.1.2011.5.25.186.1.14.1.5	Integer32	read-only	Indicates the channel ID.
INT hwClockCesAcrDomianInfoState	1.3.6.1.4.1.2011.5.25.186.1.14.1.6	INTEGER	read-only	The state of CES ACR clock source.
hwClockClusterTopoTable	1.3.6.1.4.1.2011.5.25.186.1.15		not-accessible	The CES ACR domain infomation table.
hwClockClusterTopoEntry	1.3.6.1.4.1.2011.5.25.186.1.15.1		not-accessible	Description.
INT hwClockClusterSyncType	1.3.6.1.4.1.2011.5.25.186.1.15.1.1	INTEGER	read-only	The type of clock inter-chassis sync.
INT hwClockClusterTopoType	1.3.6.1.4.1.2011.5.25.186.1.15.1.2	INTEGER	read-only	The type of clock inter-chassis topo..
INT hwClockClusterTopoLinkType	1.3.6.1.4.1.2011.5.25.186.1.15.1.3	INTEGER	read-only	The type of clock inter-chassis link.
INT hwClockClusterTopoStatus	1.3.6.1.4.1.2011.5.25.186.1.15.1.4	INTEGER	read-only	The status of clock inter-chassis topo.
hwClockConformance	1.3.6.1.4.1.2011.5.25.186.10
hwClockSourceCompliances	1.3.6.1.4.1.2011.5.25.186.10.1
hwClockSourceCompliance	1.3.6.1.4.1.2011.5.25.186.10.1.1			The compliance of clock MIB.
hwClockSourceGroups	1.3.6.1.4.1.2011.5.25.186.10.2
hwClockManageSysGroup	1.3.6.1.4.1.2011.5.25.186.10.2.8			The manage group.
hwClockSysSelGroup	1.3.6.1.4.1.2011.5.25.186.10.2.9			The system selection group.
hwClockSourceCfgGroup	1.3.6.1.4.1.2011.5.25.186.10.2.10			The clock source group.
hwClockPortCfgGroup	1.3.6.1.4.1.2011.5.25.186.10.2.13			The port config of clock source group.
hwClockBitsCfgGroup	1.3.6.1.4.1.2011.5.25.186.10.2.14			The BITS clock source group.
hwClockTrapOidGroup	1.3.6.1.4.1.2011.5.25.186.10.2.15			The clock trap group.
hwClockNotificationsGroup	1.3.6.1.4.1.2011.5.25.186.10.2.16			This is the group of clock notification.
hwClockLineCfgGroup	1.3.6.1.4.1.2011.5.25.186.10.2.17			The line clock group..

RFC description

Manages clock synchronization and 1588 PTP interfaces on Huawei network equipment.

Start monitoring Huawei routers, switches, and transport equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-CLOCK-MIB

What Is HUAWEI-CLOCK-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description