HUAWEI-BRAS-SRVCFG-DEVICE-MIB

All MIBs › HUAWEI-BRAS-SRVCFG-DEVICE-MIB

Organization: Huawei Technologies Co., Ltd.

Last Updated: 2004-03-04

Category: Domain: Subscriber Management, Vendor: Huawei

Description: Huawei BRAS service configuration device MIB providing device-level service provisioning and global parameter settings for broadband access services.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-BRAS-SRVCFG-DEVICE-MIB?

HUAWEI-BRAS-SRVCFG-DEVICE-MIB is a Huawei private MIB that is part of the SRVCFG (Service Configuration) module family for Huawei Broadband Remote Access Server (BRAS) platforms, providing device-level service provisioning and global parameter configuration used in broadband subscriber access services. It exposes configuration-oriented objects covering device-wide service settings rather than interface counters or environmental sensors specifically. Its monitoring relevance leans toward configuration/software status: confirming that global service parameters on the BRAS are set as intended, which underpins subscriber session establishment (PPPoE/IPoE, DHCP-based broadband access) for downstream services. As a SRVCFG-family module it works alongside other Huawei BRAS SRVCFG MIBs within Huawei's private enterprise MIB tree. It is deployed on Huawei BRAS/broadband access platforms operated by ISPs to manage large-scale residential and business broadband access. Engineers can download the HUAWEI-BRAS-SRVCFG-DEVICE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-BRAS-SRVCFG-DEVICE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei BRAS (Broadband Remote Access Server) platforms

Monitoring Examples

No specific object or table names were supplied for this MIB in the source data, so concrete instance names cannot be cited; based on its description, it would expose device-wide service configuration parameters that a BRAS administrator polls to confirm consistent provisioning across the platform, which underlies the establishment of broadband subscriber sessions.

What Can Be Monitored

device-level broadband service configuration parameters

Imported Objects

From HUAWEI-MIB

hwBRASMib

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From MPLS-VPN-MIB

mplsVpnVrfName

OBJECT-TYPE

From SNMPv2-SMI

Integer32
IpAddress
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwBRASSrvcfgDevice	1.3.6.1.4.1.2011.5.25.40.6			The MIB contains objects of module SRVCFG.
hwSrvcfgDeviceMibObjects	1.3.6.1.4.1.2011.5.25.40.6.1
hwDeviceUserTable	1.3.6.1.4.1.2011.5.25.40.6.1.1		not-accessible	The table of device user.
hwDeviceUserEntry	1.3.6.1.4.1.2011.5.25.40.6.1.1.1		not-accessible	Description.
IP hwDeviceUserStartIpAddr	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.1	IpAddress	read-only	The start ip address of device user.
IP hwDeviceUserEndIpAddr	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.2	IpAddress	read-create	The end ip address of device user.
NUM hwDeviceUserIfIndex	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.3	InterfaceIndex	read-create	The index of interface which device user was in.
STR hwDeviceUserIfName	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.4	DisplayString	read-only	The name of interface.
I32 hwDeviceUserVlan	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.5	Integer32	read-create	The vlan of device user.
I32 hwDeviceUserVpi	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.6	Integer32	read-create	The vpi of device user.
I32 hwDeviceUserVci	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.7	Integer32	read-create	The vci of device user.
MAC hwDeviceUserMac	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.8	MacAddress	read-create	The MAC address of device user.
STR hwDeviceUserDomain	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.9	DisplayString	read-create	The domain which device user was part of.
INT hwDeviceUserStatus	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.10	INTEGER	read-only	The status of device user.
ROW hwDeviceUserRowStatus	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.11	RowStatus	read-write	The row status of device user.
I32 hwDeviceQinQUserVlan	1.3.6.1.4.1.2011.5.25.40.6.1.1.1.12	Integer32	read-create	The QinQ vlan of device user.
hwDeviceUserTableV2	1.3.6.1.4.1.2011.5.25.40.6.1.2		not-accessible	The table of device user.(V2)
hwDeviceUserEntryV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1		not-accessible	Description.(V2)
IP hwDeviceUserStartIpAddrV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.1	IpAddress	read-only	The start ip address of device user.(V2)
IP hwDeviceUserEndIpAddrV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.2	IpAddress	read-create	The end ip address of device user.(V2)
NUM hwDeviceUserIfIndexV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.3	InterfaceIndex	read-create	The index of interface which device user was in.(V2)
STR hwDeviceUserIfNameV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.4	DisplayString	read-only	The name of interface.(V2)
I32 hwDeviceUserVlanV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.5	Integer32	read-create	The vlan of device user.(V2)
I32 hwDeviceUserVpiV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.6	Integer32	read-create	The vpi of device user.(V2)
I32 hwDeviceUserVciV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.7	Integer32	read-create	The vci of device user.(V2)
MAC hwDeviceUserMacV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.8	MacAddress	read-create	The MAC address of device user.(V2)
STR hwDeviceUserDomainV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.9	DisplayString	read-create	The domain which device user was part of.(V2)
INT hwDeviceUserStatusV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.10	INTEGER	read-only	The status of device user.(V2)
ROW hwDeviceUserRowStatusV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.11	RowStatus	read-write	The row status of device user.(V2)
I32 hwDeviceQinQUserVlanV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.12	Integer32	read-create	The QinQ vlan of device user.(V2)
STR hwDeviceUserVrfNameV2	1.3.6.1.4.1.2011.5.25.40.6.1.2.1.13	DisplayString	read-only	The vpn instance of device user.(V2)
hwSrvcfgDeviceConformance	1.3.6.1.4.1.2011.5.25.40.6.2
hwSrvcfgDeviceCompliances	1.3.6.1.4.1.2011.5.25.40.6.2.1
hwSrvcfgDeviceCompliance	1.3.6.1.4.1.2011.5.25.40.6.2.1.1			The compliance statement for systems supporting the this module.
hwDeviceUserGroups	1.3.6.1.4.1.2011.5.25.40.6.2.2
hwDeviceUserGroup	1.3.6.1.4.1.2011.5.25.40.6.2.2.1			The Device User group.
hwDeviceUserV2Group	1.3.6.1.4.1.2011.5.25.40.6.2.2.2			The Device User group.(V2)

RFC description

Service configuration device management for Huawei BRAS broadband remote access servers.

Start monitoring Huawei BRAS (Broadband Remote Access Server) platform (device-level service config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-BRAS-SRVCFG-DEVICE-MIB

What Is HUAWEI-BRAS-SRVCFG-DEVICE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description