All MIBs › HPN-ICF-TRANSCEIVER-INFO-MIB › hpnicfTransceiverErrors
hpnicfTransceiverErrors
Module: HPN-ICF-TRANSCEIVER-INFO-MIB
OID (symbolic): HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverErrors
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.38
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Bitmask indicating transceiver errors. Transceiver information I/O error(0) Transceiver information checksum error(1) Transceiver type and port configuration mismatch(2) Transceiver type not supported by port hardware(3) WIS local fault(4) Receive optical power fault(5) PMA/PMD receiver local fault(6) PCS receive local fault(7) PHY XS receive local fault(8) Laser bias current fault(9) Laser temperature fault(10) Laser output power fault(11) TX fault(12) PMA/PMD transmitter local fault(13) PCS transmit local fault(14) PHY XS Transmit Local Fault(15) RX loss of signal(16) Unused(17-31)
What is hpnicfTransceiverErrors?
This bitmask reports which specific transceiver fault conditions are currently active, such as an I/O or checksum error reading the optic's EEPROM, a type/port configuration mismatch, an unsupported transceiver type, or various PHY/laser local-fault bits; an admin reads the set bits to pinpoint exactly why an optic isn't working rather than just knowing the link is down.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.38 snmpwalk -v2c -c public <target> HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverErrors
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.38.1 snmpget -v2c -c public <target> HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverErrors.1
Start monitoring H3C/HPE Networking (ICF-based) device with pluggable optical transceivers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-TRANSCEIVER-INFO-MIB::hpnicfTransceiverErrors OID value, configure state conditions and alerts, and monitor any H3C/HPE Networking (ICF-based) device with pluggable optical transceivers from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.70 | hpnicfTransceiver | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1 | hpnicfTransceiverInfoAdm | HPN-ICF-TRANSCEIVER-INFO-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1 | hpnicfTransceiverInfoTable | HPN-ICF-TRANSCEIVER-INFO-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1 | hpnicfTransceiverInfoEntry | HPN-ICF-TRANSCEIVER-INFO-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.70.1.1.1.38 | hpnicfTransceiverErrors | HPN-ICF-TRANSCEIVER-INFO-MIB |