HPN-ICF-SYS-MAN-MIB

All MIBs › HPN-ICF-SYS-MAN-MIB

Last Updated: 2009-06-07

Category: Device Management, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages system-level parameters including device identity, uptime, and resource thresholds on HP/Comware devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-SYS-MAN-MIB?

HPN-ICF-SYS-MAN-MIB is a proprietary system-management module for HP/H3C Comware-based switches and routers (the "hpnicf" prefix denotes HP Networking's ICF/Comware line, developed jointly with H3C). It exposes system-identity and clock data, including local clock settings, summer/daylight-saving time configuration, and a table linking each physical entity to its currently active configuration and boot image files. Administrators use it to monitor hardware and software status such as the device's real-time clock state, which configuration file and software image a chassis or board is actually running, and whether daylight-saving adjustments were applied correctly, catching a unit that reloaded with an unintended image. It builds on the ENTITY-MIB's physical-index scheme (hpnicfSysCurEntPhysicalIndex) to tie configuration data to specific hardware slots. It is typically deployed in enterprise campus/data-center networks running HP A-Series or H3C Comware switches where NMS tools track firmware compliance and time synchronization. Engineers can download the HPN-ICF-SYS-MAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-SYS-MAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware switches and routers
HP Networking ICF-based network devices

Monitoring Examples

An admin polls hpnicfSysCurTable (via hpnicfSysCurEntPhysicalIndex and hpnicfSysCurCFGFileIndex) to confirm which configuration file each chassis or blade is currently booted with, flagging mismatches after a firmware rollout. hpnicfSysLocalClock and hpnicfSysLocalClockString are read to verify the device's real-time clock matches NTP, while hpnicfSysSummerTimeEnable/hpnicfSysSummerTimeStart/hpnicfSysSummerTimeEnd confirm daylight-saving rules are correctly scheduled. A drift or mismatch in these objects signals a device that failed to sync time or reload the intended image.

What Can Be Monitored

current configuration file per physical entity
current boot image
system local clock/time
daylight-saving time schedule and offset
per-slot configuration index

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From SNMP-TARGET-MIB

SnmpTagList
SnmpTagValue

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfSysBootIpeEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.3.1		not-accessible	Entry in the IPE file table.
I32 hpnicfSysBootIpeIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.3.1.1	Integer32	not-accessible	IPE file index. The index must be included in hpnicfSysIpeFileTable.
ROW hpnicfSysBootIpeRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.3.1.2	RowStatus	read-create	Row status of the IPE file table entry.
hpnicfSysBootIpeTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.3		not-accessible	Table of the IPE files to be set for startup. It should be used when hpnicfSysBootPackageTable is empty.
hpnicfSysBootPackageEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.2.1		not-accessible	Entry of the image table.
I32 hpnicfSysBootPackageIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.2.1.1	Integer32	not-accessible	Index of the software images. The index must be included in hpnicfSysPackageTable.
ROW hpnicfSysBootPackageRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.2.1.2	RowStatus	read-create	Row status of the image entry.
hpnicfSysBootPackageTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.2		not-accessible	Table of images to be set as startup images. It should be used when hpnicfSysBootIpeTable is empty.
INT hpnicfSysBtmErrorStatus	1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.5	INTEGER	read-only	This object shows the status of the specified operation after creating a row. invalidFile(1) - file is invalid. inProgress(2) - the operation is in progress. success(3) - the operation was done successfully. failed(4) - the operation failed.
hpnicfSysBtmFile	1.3.6.1.4.1.11.2.14.11.15.2.3.1.6
hpnicfSysBtmFileLoad	1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.1
OCT hpnicfSysBtmFileName	1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.2	OCTET STRING	read-create	The bootrom file name is determined by the users. The file must exist in corresponding entity. The validity of the bootrom file will be identified by system. If the file is invalid, the bootrom should fail to be updated, and the value of hpnicfSysBtmErrorStatus should be failed(4).
INT hpnicfSysBtmFileType	1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.3	INTEGER	read-create	main(1) - The effective bootrom file. none(2) - The noneffective file. When bootrom is being updated, this object must be set to main(1). When bootrom is updated successfully, this object should be main(1), and the former object with the same physical index should be none(2). When bootrom failed to be updated, this object should be none(2).
hpnicfSysBtmLoadEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1		not-accessible	Entries in the hpnicfSysBtmLoadTable are created and deleted using the hpnicfSysBtmRowStatus object. When a new row is being created and the number of entries is hpnicfSysBtmLoadMaxNumber, the row with minimal value of hpnicfSysBtmLoadTime and the value of hpnicfSysBtmFileType is none(2), should be destroyed automatically.
I32 hpnicfSysBtmLoadIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.1	Integer32	not-accessible	The index of hpnicfSysBtmLoadTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + random index + ( bit 16..31 ) ( bit 0..15 ) +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes), if the row is created by command line, the value is determined by system, and if the row is created by SNMP, the value is determined by users. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. If ENTITY-MIB is not supported, the value of this object is the unit ID for XRN devices, 0 for non-XRN device which has only one main board, the board number for non-XRN device which has multiple main boards.
I32 hpnicfSysBtmLoadMaxNumber	1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.1.1	Integer32	read-only	This object shows the maximum number of hpnicfSysBtmLoadEntry in each device/unit.
hpnicfSysBtmLoadTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2		not-accessible	This table is used to update the bootrom and show the results of the update operation. The bootrom files are listed at the hpnicfFlhFileTable. These files are used to update bootrom.
TIK hpnicfSysBtmLoadTime	1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.6	TimeTicks	read-only	This object indicates operation time.
ROW hpnicfSysBtmRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.3.1.6.2.1.4	RowStatus	read-create	Only support active(1), createAndGo(4), destroy(6). When a row is created successfully, the value of this object should be active(1), the value of hpnicfSysBtmFileName and hpnicfSysBtmFileType can not be modified by users. When bootrom is being updated, the value of hpnicfSysBtmErrorStatus is inProgress(2). When bootrom failed to be updated, the value of hpnicfSysBtmErrorStatus should be failed(4). When bootrom is updated successfully, the value of hpnicfSysBtmErrorStatus should be success(3). The value of hpnicfSysCurUpdateBtmFileName should change to the new bootrom file name. When another row is created successfully with the same physical index, and the update is successful, then the value of former hpnicfSysBtmFileType should be none(2) automatically. If a row is destroyed, hpnicfSysCurUpdateBtmFileName should not change. If a device/unit reboots, hpnicfSysBtmLoadTable should be empty.
hpnicfSysCFGFile	1.3.6.1.4.1.11.2.14.11.15.2.3.1.5
hpnicfSysCFGFileEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2.1		not-accessible	A configuration file entry. Each entry consists of information of a configuration file. hpnicfSysCFGFileIndex exclusively decides a configuration file.
hpnicfSysCFGFileGroup	1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.4			A collection of objects providing mandatory system configuration file information.
I32 hpnicfSysCFGFileIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2.1.1	Integer32	not-accessible	There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + cfgFile index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the configuration file index; the configuration file index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. If ENTITY-MIB is not supported, the value for this object is the unit ID for XRN devices ,0 for non-XRN device which has only one slot,the board number for non-XRN device which have several slots. Any index beyond the above range will not be supported.
STR hpnicfSysCFGFileLocation	1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2.1.4	DisplayString	read-only	The directory path of the image. Its form should be the same as what defined in filesystem. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ For XRN devices: unitN>slotN#flash:/
STR hpnicfSysCFGFileName	1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2.1.2	DisplayString	read-only	Configuration file name. The name should not include the colon (:) character as it is a special separator character used to delineate the device name, partition name and the file name.
I32 hpnicfSysCFGFileNum	1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.1	Integer32	read-only	The number of the configuration files in the system. It indicates the total entries of hpnicfSysCFGFileTable.
I32 hpnicfSysCFGFileSize	1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2.1.3	Integer32	read-only	Size of the file in bytes. Note that it does not include the size of the filesystem file header. File size will always be non-zero.
hpnicfSysCFGFileTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.5.2		not-accessible	A table of configuration files in this system. At present, the system doesn't support dual configure file, it should act as 'dual image' if dual configure file is supported.
hpnicfSysClock	1.3.6.1.4.1.11.2.14.11.15.2.3.1.1
NTF hpnicfSysClockChangedNotification	1.3.6.1.4.1.11.2.14.11.15.2.3.2.1			A clock changed notification is generated when the current local date and time for the system has been manually changed. The value of hpnicfSysLocalClock reflects new date and time.
hpnicfSysClockGroup	1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.1			A collection of objects providing mandatory system clock information.
OCT hpnicfSysCurBtmFileName	1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1.4	OCTET STRING	read-only	The bootrom file currently used by the specified entity.
I32 hpnicfSysCurCFGFileIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1.2	Integer32	read-only	The startup configuration file currently used by the specified entity. If the value of it is zero, no configuration file is used. It will be the value of corresponding hpnicfSysCFGFileIndex in hpnicfSysCFGFileTable.
I32 hpnicfSysCurEntPhysicalIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1.1	Integer32	not-accessible	The value of this object is the entity index which depends on the implementation of ENTITY-MIB. If ENTITY-MIB is not supported, the value for this object is the unit ID for XRN devices , 0 for non-XRN device which has only one mainboard, the board number for non-XRN device which have several mainboards.
hpnicfSysCurEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1		not-accessible	An entry of hpnicfSysCurTable.
hpnicfSysCurGroup	1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.5			A collection of system current status.
I32 hpnicfSysCurImageIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1.3	Integer32	read-only	The image file currently used by the specified entity. It will be the value of corresponding hpnicfSysImageIndex in hpnicfSysImageTable.
hpnicfSysCurrent	1.3.6.1.4.1.11.2.14.11.15.2.3.1.2
hpnicfSysCurTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1		not-accessible	The current status of system. A configuration file, an image file and bootrom information are used to describe the current status.
OCT hpnicfSysCurUpdateBtmFileName	1.3.6.1.4.1.11.2.14.11.15.2.3.1.2.1.1.5	OCTET STRING	read-only	The default value of this object is the same as the value of hpnicfSysCurBtmFileName. The value will be changed after updating the bootrom successfully. This bootrom will take effect on next startup.
hpnicfSysImage	1.3.6.1.4.1.11.2.14.11.15.2.3.1.4
hpnicfSysImageEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1		not-accessible	An entity image entry. Each entry consists of information of an entity image. The hpnicfSysImageIndex exclusively defines an image file.
hpnicfSysImageGroup	1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.3			A collection of objects providing mandatory system image information.
I32 hpnicfSysImageIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1.1	Integer32	not-accessible	There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + image index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the image index;Image file Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. If ENTITY-MIB is not supported,the value for this object is the unit ID for XRN devices ,0 for non-XRN device which has only one main board,the board number for non-XRN device which have several main boards. Any index beyond the above range will not be supported. If a file is added in, its hpnicfSysImageIndex will be the maximum image index plus one. If the image file is removed, renamed, or moved from one place to another, its hpnicfSysImageIndex is not reallocated. If the image file's content is replaced, its hpnicfSysImageIndex will not change.
STR hpnicfSysImageLocation	1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1.4	DisplayString	read-only	The directory path of the image. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/ For XRN devices: unitN>slotN#flash:/
STR hpnicfSysImageName	1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1.2	DisplayString	read-only	The file name of the image. It MUST NOT contain the path of the file.
I32 hpnicfSysImageNum	1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.1	Integer32	read-only	The number of system images. It indicates the total entries of hpnicfSysImageTable.
I32 hpnicfSysImageSize	1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1.3	Integer32	read-only	Size of the file in bytes.
hpnicfSysImageTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2		not-accessible	The system image management table. When 'copy srcfile destfile' is executed via the CLI, if destfile is not existed, then hpnicfSysImageType of the new file will be 'none'; otherwise hpnicfSysImageType keeps its current value. When 'move srcfile destfile' is executed via the CLI, hpnicfSysImageType and hpnicfSysImageIndex remain the same while hpnicfSysImageLocation changes. When 'rename srcfile' is executed via the CLI,hpnicfSysImageType and hpnicfSysImageIndex remain the same while hpnicfSysImageName changes. When 'delete srcfile' is executed via the CLI, the file is deleted from hpnicfSysImageTable while index of the file keeps and will not be allocated.
INT hpnicfSysImageType	1.3.6.1.4.1.11.2.14.11.15.2.3.1.4.2.1.5	INTEGER	read-write	It indicates the reloading sequence attribute of the image. For devices which support dual image: If the value is 'main(1)',the image will be the first image in the next reloading procedure. If the value is 'backup(2)', the image will be used if the main image fails. If the value is 'secure(4)', the image will be used if the main image and backup image both fail. If the value is 'none(3)',the image will not be used in the next reloading procedure. At the same time,you also can specify the main image by hpnicfSysReloadImage in hpnicfSysReloadScheduleTable. If the image is different from previous main image, the previous main image will not be main image again. And the image table will update with this variation. Vice versa, if you have defined the reload schedule, and then you define a new main image through hpnicfSysImageType when you are waiting the reload schedule to be executed, the real main image will be the latest one. It is strongly suggested to define the main image here, not by hpnicfSysReloadImage in hpnicfSysReloadScheduleTable. There are some rules for setting the value of hpnicfSysImageType: a)When a new image file is defined as 'main' or 'backup' file,the hpnicfSysImageType of old 'main' or 'backup' file will automatically be 'none'. b)It is forbidden to set 'none' attribute manually. c)It is forbidden to set 'secure' attribute manually. d)If 'main' image is set to 'backup', the file keeps 'main'. And vice versa. At this time, the file has 'main-backup' property. e)If the secure image is set to 'main' or 'backup', the file has 'main-secure' or 'backup-secure'property. f)If the secure image is set to 'main' and 'backup', the file has the 'main-backup-secure' property. g)If the none image is set to 'main' or 'backup', the file has the 'main' or 'backup' property. The following table describes whether it is ok to set to another state directly from original state. +--------------+-----------+-------------+-------------+ \| set to \| set to \| set to \| set to \| \| \| \| \| \| original \| 'main' \| 'backup' \| 'none' \| 'secure' \| state \| \| \| \| \| --------------+--------------+-----------+-------------+-------------+ \| \| \| \| \| main \| --- \| yes \| no \| no \| \| \| \| \| \| \| \| \| \| \| --------------+--------------+-----------+-------------\|-------------+ \| \| \| \| \| backup \| yes \| --- \| no \| no \| \| \| \| \| \| --------------+--------------+-----------+-------------\|-------------+ \| \| \| \| \| \| \| \| \| \| none \| yes \| yes \| --- \| no \| \| \| \| \| \| --------------+--------------+-----------+-------------+-------------+ \| \| \| \| \| secure \| yes \| yes \| no \| --- \| \| \| \| \| \| \| \| \| \| \| --------------+--------------+-----------+-------------+-------------+ If there is one main image in the system, one row of HpnicfSysReloadScheduleEntry whose hpnicfSysReloadImage is equal to the main image's hpnicfSysImageIndex will be created automatically. But if any row is deleted, it will not be created automatically in hpnicfSysReloadScheduleTable. For the device which doesn't support dual image(main/backup): Only 'main' and 'none' is supported and it only can be set from none to main. When a new image file is defined as 'main' file,the hpnicfSysImageType of old 'main' file will automatically be 'none'.
hpnicfSysIpeFile	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8
hpnicfSysIpeFileEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1		not-accessible	An IPE package file entry. Each entry consists of information of an IPE package file. hpnicfSysIpeFileIndex exclusively decides an IPE file.
I32 hpnicfSysIpeFileIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1.1	Integer32	not-accessible	There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + IPE index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the IPE file index; IPE file Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Any index beyond the above range will not be supported. If a file is added in, its hpnicfSysIpeFileIndex will be the maximum image ndex plus one. If the IPE file is removed, renamed, or moved from one place to another, its hpnicfSysIpeFileIndex is not reallocated. If the IPE file's content is replaced, its hpnicfSysIpeFileIndex will not change.
STR hpnicfSysIpeFileLocation	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1.4	DisplayString	read-only	The directory path of the IPE file. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/
SNM hpnicfSysIpeFileModel	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1.5	SnmpTagList	read-only	Device models for which the IPE file contains software images. For the ease of software upgrade, an IPE file might contain software images for a parent device and extended devices. Examples of extended devices include PEXs and firewall modules.
STR hpnicfSysIpeFileName	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1.2	DisplayString	read-only	The file name of the IPE file. It MUST NOT contain the path of the file.
I32 hpnicfSysIpeFileNum	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.1	Integer32	read-only	The number of software IPE(Image Package Envelop) files. It indicates the total entries of hpnicfSysIpeFileTable.
INT hpnicfSysIpeFileOperateAttribute	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1.3	INTEGER	read-create	It indicates the attribute of the IPE file when it is used in the reloading. If the value is 'primary', the packages in the IPE file will be the first packages in the next reloading procedure. If the value is 'secondary', the package in the IPE file will be used if the primary packages fails. If the value is 'none', the IPE file is only unpacked, will not be used in the reloading procedure.
hpnicfSysIpeFileOperateEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1		not-accessible	An operate request entry.
I32 hpnicfSysIpeFileOperateFileIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1.2	Integer32	read-create	Specify the IPE file in the hpnicfSysIpeFileTable. This IPE file will be unpacked to package files.
I32 hpnicfSysIpeFileOperateIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1.1	Integer32	not-accessible	The unique index value of a row in this table.
INT hpnicfSysIpeFileOperateResult	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1.5	INTEGER	read-only	the result of the operation.
ROW hpnicfSysIpeFileOperateRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4.1.4	RowStatus	read-create	the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified.
hpnicfSysIpeFileOperateTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.4		not-accessible	A table of IPE file operate.
U32 hpnicfSysIpeFileSize	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2.1.3	Unsigned32	read-only	Size of the file in bytes.
hpnicfSysIpeFileTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.2		not-accessible	The system IPE file manage table.
STR hpnicfSysIpePackageDescription	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.5	DisplayString	read-only	It is the description of the package.
hpnicfSysIpePackageEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1		not-accessible	An entry of the hpnicfIpePackageTable. Indexed by hpnicfSysIpeFileIndex and hpnicfSysIpePackageIndex.
STR hpnicfSysIpePackageFeature	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.6	DisplayString	read-only	Indicate the feature of the package.
I32 hpnicfSysIpePackageIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.1	Integer32	not-accessible	It is the IPE package index; IPE Package Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. Any index beyond the above range will not be supported.
STR hpnicfSysIpePackageModel	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.8	DisplayString	read-only	Indicates whether the image package file is for an extended device, the parent device, or both. Examples of extended devices include PEXs and firewall modules.
STR hpnicfSysIpePackageName	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.2	DisplayString	read-only	The file name of the package file.
U32 hpnicfSysIpePackageSize	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.3	Unsigned32	read-only	Size of the package file in bytes.
hpnicfSysIpePackageTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3		not-accessible	The IPE package file table. It shows the package files in the IPE file.
INT hpnicfSysIpePackageType	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.4	INTEGER	read-only	It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuration management and other basic system package. feature : feature packages, providing different services. patch : patch file contains fixes for a specific defect.
STR hpnicfSysIpePackageVersion	1.3.6.1.4.1.11.2.14.11.15.2.3.1.8.3.1.7	DisplayString	read-only	The version of the package.
DAT hpnicfSysLocalClock	1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.1	DateAndTime	read-write	This node gives the current local time of the system. The unit of it is DateAndTime.
OCT hpnicfSysLocalClockString	1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.3	OCTET STRING	read-write	This node gives the current local time of the system. For example, Tuesday May 26, 2002 at 1:30:15 would be displayed as: 2002-5-26T13:30:15.0Z
hpnicfSysPackage	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7
INT hpnicfSysPackageAttribute	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.6	INTEGER	read-write	It indicates the attribute of the package file. If the value is 'primary', the package will be the first package in the next reloading procedure. If the value is 'secondary', the package will be used if the primary package fails. If the value is 'none', it will not be used in the next reloading procedure.
STR hpnicfSysPackageDescription	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.8	DisplayString	read-only	It is the description of the package.
hpnicfSysPackageEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1		not-accessible	An software package entry. Each entry consists of information of an software package.
STR hpnicfSysPackageFeature	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.9	DisplayString	read-only	Indicate the feature of the package. Different package files could be the same feature.
I32 hpnicfSysPackageIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.1	Integer32	not-accessible	There are two parts for the index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++ + physical index + package index + +++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes) is the Package index; Package file Index is a monotonically increasing integer for the sole purpose of indexing events. When it reaches the maximum value, an extremely unlikely event, the agent wraps the value back to 1 and may flush existing entries. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. Any index beyond the above range will not be supported. If a file is added in, its hpnicfSysPackageIndex will be the maximum image index plus one. If the package file is removed, renamed, or moved from one place to another, its hpnicfSysPackageIndex is not reallocated. If the package file's content is replaced, its hpnicfSysPackageIndex will not change.
INT hpnicfSysPackageLoadAttribute	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.11	INTEGER	read-write	File attribute of the startup image for an extended device to load from the parent device. Examples of extended devices include PEXs and firewall modules. The none attribute is returned if the image is not for extended devices, or if the load attribute is not specified.
STR hpnicfSysPackageLocation	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.4	DisplayString	read-only	The directory path of the package. Its form should be the same as what defined in file system. Currently it is defined as follows: For mainboard: flash:/ For slave mainboard and subboards: slotN#flash:/
STR hpnicfSysPackageModel	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.12	DisplayString	read-only	Indicates whether the image file is for an extended device or the parent device. Examples of extended devices include PEXs and firewall modules.
STR hpnicfSysPackageName	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.2	DisplayString	read-only	The file name of the package. It MUST NOT contain the path of the file.
I32 hpnicfSysPackageNum	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.1	Integer32	read-only	The number of software packages. It indicates the total entries of hpnicfSysPackageTable.
hpnicfSysPackageOperateEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1		not-accessible	An operate request entry.
I32 hpnicfSysPackageOperateEntryLimit	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.3	Integer32	read-write	The maximum number of the entries in hpnicfSysPackageOperateTable.
I32 hpnicfSysPackageOperateIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1.1	Integer32	not-accessible	The unique index value of a row in this table.
I32 hpnicfSysPackageOperatePackIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1.2	Integer32	read-create	Specify the package file in the hpnicfSysPackageTable.
INT hpnicfSysPackageOperateResult	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1.5	INTEGER	read-only	the result of the operation.
ROW hpnicfSysPackageOperateRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1.4	RowStatus	read-create	the status of this table entry. When the status is active all the object's value in the entry is not allowed to modified.
INT hpnicfSysPackageOperateStatus	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4.1.3	INTEGER	read-create	activate or deactivate a package in the hpnicfSysPackageTable.
hpnicfSysPackageOperateTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.4		not-accessible	A table of package file operate.
U32 hpnicfSysPackageSize	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.3	Unsigned32	read-only	Size of the file in bytes.
INT hpnicfSysPackageStatus	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.7	INTEGER	read-only	It indicates the status of the package file. If this file is used in the current system, its status is 'active'.
hpnicfSysPackageTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2		not-accessible	The system package management table.
INT hpnicfSysPackageType	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.5	INTEGER	read-only	It indicates the type of the package file. boot : kernel, file system, memory management and other core components. system : interface management, configuration management and other basic system package. feature : feature packages, providing different services. patch : patch file contains fixes for a specific defect.
STR hpnicfSysPackageVersion	1.3.6.1.4.1.11.2.14.11.15.2.3.1.7.2.1.10	DisplayString	read-only	Indicate the version of the package.
hpnicfSysReload	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3
INT hpnicfSysReloadAction	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.2	INTEGER	read-write	Writing reloadOnSchedule(2) to this object performs the reload operation on schedule. If hpnicfSysReloadScheduleTime is not set, the value of hpnicfSysReloadAction can't be set to 'reloadOnSchedule(2)'. Writing reloadAtOnce(3)to this object performs the reload operation at once, regardless of the hpnicfSysReloadScheduleTime. When reloadCancel(4)is set, the scheduled reload action will be cancelled and the value of hpnicfSysReloadAction will be 'reloadUnavailable(1)',the value of hpnicfSysReloadSchedule will be 0, hpnicfSysReloadTag will be given a value of zero length, but the content of hpnicfSysReloadScheduleTable will remain. The hpnicfSysReloadSchedule and hpnicfSysReloadTag determine the reload entity(ies) in mutually exclusive way. And the hpnicfSysReloadSchedule will be handled at first. If the value of hpnicfSysReloadSchedule is invalid, then the hpnicfSysReloadTag will be handled. If the value of hpnicfSysReloadSchedule is valid, the value of hpnicfSysReloadTag is ignored and a reload action will be implemented to the entity specified by hpnicfSysReloadEntity in the entry pointed by hpnicfSysReloadSchedule. If hpnicfSysReloadSchedule is valid, but the entry hpnicfSysReloadSchedule pointing to is not active, the reload action will be ignored , and an inconsistent value will be returned. If multiple entities are required to be reloaded at the same time, the value of hpnicfSysReloadTag must be specified to select the reload parameters in the hpnicfSysReloadSceduelTable, and hpnicfSysReloadSchedule must have the value of '0'. If the whole fabric is to be reloaded in an XRN device, all the units in the fabric must have at least one entry in the hpnicfSysReloadSceduelTable with the same tag in hpnicfSysReloadSceduelTagList. When a reload action is done, or there is no reload action, the value should be reloadUnavailable(1).
I32 hpnicfSysReloadCfgFile	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.3	Integer32	read-create	The value indicates an entry in hpnicfSysCFGFileTable. It defines a configuration file for reload action. It is the value of corresponding hpnicfSysCFGFileIndex in hpnicfSysCFGFileTable. The zero value means no configuration file has been set for this entry, and no configuration file is used during system reloading.
I32 hpnicfSysReloadEntity	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.2	Integer32	read-create	The value of hpnicfSysReloadEntity indicates an entry in entPhysicalTable, which is the physical entity to be reloaded. If ENTITY-MIB is not supported,the value for this object is the unit ID for XRN devices , 0 for non-XRN device which has only one mainboard, the board number for non-XRN device which have several mainboards. Each entity has only one row in hpnicfSysReloadScheduleTable.
hpnicfSysReloadGroup	1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.2			A collection of objects providing mandatory system reload.
I32 hpnicfSysReloadImage	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.4	Integer32	read-create	The value indicates an entry in hpnicfSysImageTable. It defines an image file for reload action. It is the value of corresponding hpnicfSysImageIndex in hpnicfSysImageTable. If dual image is supported, the main image attribute can be set through this object or by hpnicfSysImageType of hpnicfSysImageTable of the entity. It is strongly suggested to set this attribute by the latter. If main image attribute is set here, the hpnicfSysImageType in hpnicfSysImageTable of the corresponding entity will be updated, and vice versa. Before reboot, the device will check the validation of the entry. If the file does not exist, the device will not reboot and a trap will be send to NMS.
NTF hpnicfSysReloadNotification	1.3.6.1.4.1.11.2.14.11.15.2.3.2.2			A hpnicfSysReloadNotification will be sent before the corresponding entity is rebooted. It will also be sent if the entity fails to reboot because the clock has changed.
STR hpnicfSysReloadReason	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.5	DisplayString	read-create	The reason of system's reloading. It is a zero length octet string when not set.
ROW hpnicfSysReloadRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.7	RowStatus	read-create	If one of the value of hpnicfSysReloadEntity,hpnicfSysReloadImage is invalid, the value of hpnicfSysReloadRowStatus can not be set to the value of ACTIVE. A valid entry means the specified element is available in current system.
I32 hpnicfSysReloadSchedule	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.1	Integer32	read-write	The object points one row in hpnicfSysReloadScheduleTable. Its value is equal to the value of hpnicfSysReloadScheduleIndex. When a reload action is finished, the value of it would be zero which means no any reload schedule is selected.
hpnicfSysReloadScheduleEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1		not-accessible	Entry of hpnicfSysReloadScheduleTable.
I32 hpnicfSysReloadScheduleIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.1	Integer32	not-accessible	The index of hpnicfSysReloadScheduleTable. There are two parts for this index depicted as follows: 31 15 0 +++++++++++++++++++++++++++++++++++++++++ + physical index + random index + ( bit 16..31 ) ( bit 0..15 ) +++++++++++++++++++++++++++++++++++++++++ From bit0 to bit15 (two bytes), if the row is automatic created, the value is zero, and if the row is created by users, then the value is determined by the users. From bit16 to bit31 (two bytes) is the physical index the same as the entPhysicalIndex specified in ENTITY-MIB. For XRN devices, physical index is the value of a chassis entPhysicalIndex. 0 for non-XRN device which has only one main board, the board number for non-XRN device which have multiple main boards.
hpnicfSysReloadScheduleTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3		not-accessible	A reload parameters set table. The table is exclusively used for reloading. When reloading action finished, the value of the table may be empty or still exist. If the mainboard in non-XRN device or all the units of the fabric in XRN device are reloaded,then the table will be refreshed.
SNM hpnicfSysReloadScheduleTagList	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.8	SnmpTagList	read-create	It specifies a tag list for the entry.
DAT hpnicfSysReloadScheduleTime	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.3.1.6	DateAndTime	read-create	Specify the local time at which the reload action will occur. we will only take octet strings with length 8 for this object which indicates the local time of the switch. The maximum scheduled interval between the specified time and the current system clock time is 24 days . field octets contents range ----- ------ -------- ----- 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 For example, Tuesday May 26, 1992 at 1:30:15 PM would be displayed as: 1992-5-26,13:30:15 If the set value is less than the value of hpnicfSysLocalClock or beyond the maximum scheduled time limit, a bad value error occurred. The value of all-zero octet strings indicates system reload at once if the reload action is reloadOnSchedule(2).
SNM hpnicfSysReloadTag	1.3.6.1.4.1.11.2.14.11.15.2.3.1.3.4	SnmpTagValue	read-write	This object contains a single tag value which is used to select entries in the hpnicfSysReloadScheduleTable. In the hpnicfSysReloadScheduleTable,any entry that contains a tag value which is equal to the value of this object is selected. For example, the value of hpnicfSysReloadTag is 'TOM',and the hpnicfSysReloadScheduleTagList of each hpnicfSysReloadScheduleTable entry are as follows: 1)'TOM,ROBERT,MARY' 2)'TOM,DAVE' 3)'DAVE,MARY' Since there are 'TOM' in 1) and 2),so 1) and 2) are selected. If this object contains a value of zero length, no entries are selected.
hpnicfSysSetBootImage	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9
INT hpnicfSysSetBootImageAction	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1.1	INTEGER	read-write	Sets images as primary startup images, secondary startup images, or both. Primary startup images are also called 'main' startup images. For extended devices, startup images saved on their local media are called 'local startup images,' and images saved on the parent device are called 'remote startup images.' none: Returns a success without setting image attributes. done: Clears data for the previous startup image operation. This object must be set 'done' before each startup image operation. -------------------------+-----------------------+--------------------------------------------------- Action \| Parent devices \| Extended devices -------------------------+-----------------------+--------------------------------------------------- bootLoadPrimary \| Sets images as the \| Sets images as the primary startup images \| primary startup \| \| images \| With storage medium: Sets both local and \| \| remote startup images \| \| Without storage medium: Sets remote startup images -------------------------+-----------------------+--------------------------------------------------- bootLoadSecondary \| Sets images as the \| Sets images as the backup startup images \| backup startup images \| \| \| With storage medium: Sets both local and \| \| remote startup images \| \| Without storage medium: Sets remote startup images -------------------------+-----------------------+--------------------------------------------------- bootLoadPrimarySecondary \| Sets images as both \| Sets images as both the primary and backup startup \| the primary and \| images \| backup startup images \| With storage medium: Sets both local and \| \| remote startup images \| \| Without storage medium: Sets remote startup images -------------------------+-----------------------+--------------------------------------------------- bootPrimary \| Sets images as the \| Sets images as the primary startup images \| primary startup \| \| images \| With storage medium: Sets local startup images \| \| Without storage medium: N/A -------------------------+-----------------------+--------------------------------------------------- bootSecondary \| Sets images as the \| Sets images as the backup startup images \| backup startup images \| \| \| With storage medium: Sets local startup images \| \| Without storage medium: N/A -------------------------+-----------------------+--------------------------------------------------- bootPrimarySecondary \| Sets images as both \| Sets images as both the primary and backup startup \| the primary and \| images \| backup startup images \| With storage medium: Sets local startup images \| \| Without storage medium: N/A -------------------------+-----------------------+--------------------------------------------------- loadPrimary \| N/A \| Sets images as the remote primary startup images -------------------------+-----------------------+--------------------------------------------------- loadSecondary \| N/A \| Sets images as the remote backup startup images -------------------------+-----------------------+--------------------------------------------------- loadPrimarySecondary \| N/A \| Sets images as both the remote primary and \| \| backup startup images -------------------------+-----------------------+---------------------------------------------------
STR hpnicfSysSetBootImageFailedReason	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1.5	DisplayString	read-only	Startup image operation failure reason. The field is empty if the operation was successful.
STR hpnicfSysSetBootImageFailedReasonOfEachCard	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.4.1.3	DisplayString	read-only	Reason of the startup image set failure for a card. It is empty if the operation was successful.
T/F hpnicfSysSetBootImageFileOverWrite	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1.2	TruthValue	read-write	Determines whether to overwrite the existing image file with the same name as the downloaded image file.
hpnicfSysSetBootImageOp	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1
T/F hpnicfSysSetBootImageRemoveIpeFile	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1.3	TruthValue	read-write	Determines whether the IPE file will be removed when the startup images are set successfully. If this object is set to TRUE, the IPE file will be removed.
hpnicfSysSetBootImageResultEntry	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.4.1		not-accessible	Entry in the startup image operation result table.
I32 hpnicfSysSetBootImageResultIndex	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.4.1.1	Integer32	not-accessible	Index of a startup image operation result. It is identical to the entity index of each card.
INT hpnicfSysSetBootImageResultStatusOfEachCard	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.4.1.2	INTEGER	read-only	Status of the startup image set operation.
hpnicfSysSetBootImageResultTable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.4		not-accessible	Table of startup image operation results. This table shows the result for each card.
INT hpnicfSysSetBootImageStatus	1.3.6.1.4.1.11.2.14.11.15.2.3.1.9.1.4	INTEGER	read-only	Status of the startup image set operation.
NTF hpnicfSysStartUpNotification	1.3.6.1.4.1.11.2.14.11.15.2.3.2.3			a hpnicfSysStartUpNotification trap will be sent when the system starts up with 'main' image file failed, a trap will be sent to indicate which type the current image file (I.e backup or secure)is.
hpnicfSysSummerTime	1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2
INT hpnicfSysSummerTimeEnable	1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.1	INTEGER	read-only	This node indicates the status of summer time. If the value of this node is enable, means that summer time is enabled. If the value is disable, means that summer time is disabled.
DAT hpnicfSysSummerTimeEnd	1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.5	DateAndTime	read-write	This node provides the end time of summer time. The end time must be more than start time one day and less than start time one year.
INT hpnicfSysSummerTimeMethod	1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.3	INTEGER	read-write	This node provides the execute method of summer time. oneOff(1): means that summer time only takes effect at specified time. repeating(2): means that summer time takes effect in specified month/day once a year.
I32 hpnicfSysSummerTimeOffset	1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.6	Integer32	read-write	This node provides the offset time of summer time. The offset time(in seconds) means that how much time need to be appended to the local time.
DAT hpnicfSysSummerTimeStart	1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.4	DateAndTime	read-write	This node provides the start time of summer time.
STR hpnicfSysSummerTimeZone	1.3.6.1.4.1.11.2.14.11.15.2.3.1.1.2.2	DisplayString	read-write	This node describes the name of time zone in summer. The string is only used to display in local time when summer time is running. That the value of hpnicfSysLocalClock has the time zone information means that summer time is running.
hpnicfSystemBtmLoadGroup	1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.7			A collection of objects providing system update bootrom information.
hpnicfSystemMan	1.3.6.1.4.1.11.2.14.11.15.2.3			This MIB contains objects to manage the system. It focuses on the display of current configure file and image file,and the definition of reloading image. Add the support for XRN.
hpnicfSystemManMIBCompliance	1.3.6.1.4.1.11.2.14.11.15.2.3.3.1.1			The compliance statement for entities which implement the system management MIB.
hpnicfSystemManMIBCompliances	1.3.6.1.4.1.11.2.14.11.15.2.3.3.1
hpnicfSystemManMIBConformance	1.3.6.1.4.1.11.2.14.11.15.2.3.3
hpnicfSystemManMIBGroups	1.3.6.1.4.1.11.2.14.11.15.2.3.3.2
hpnicfSystemManMIBNotifications	1.3.6.1.4.1.11.2.14.11.15.2.3.2
hpnicfSystemManMIBObjects	1.3.6.1.4.1.11.2.14.11.15.2.3.1
hpnicfSystemManNotificationGroup	1.3.6.1.4.1.11.2.14.11.15.2.3.3.2.6			A collection of notifications.

RFC description

System management for HP/HPE devices including firmware images, configuration files, reloading, and clock management.

Start monitoring HP/H3C Comware switch or router (system clock/config-image tracking) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-SYS-MAN-MIB

What Is HPN-ICF-SYS-MAN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description