| OID symbolic | OID numeric | Type | Access | Description |
|---|
| hpnicfStack | 1.3.6.1.4.1.11.2.14.11.15.2.91 | | | This MIB is used to manage STM (Stack Topology Management)
information for IRF (Intelligent Resilient Framework) device.
This MIB is applicable to IRF-capable products. Some objects in
this MIB may be used only for some specific products, so users should
refer to the related documents to acquire more detailed information. |
| hpnicfStackGlobalConfig | 1.3.6.1.4.1.11.2.14.11.15.2.91.1 | | | |
| I32 hpnicfStackMaxMember | 1.3.6.1.4.1.11.2.14.11.15.2.91.1.1 | Integer32 | read-only | The maximum number of members in a stack. |
| I32 hpnicfStackMemberNum | 1.3.6.1.4.1.11.2.14.11.15.2.91.1.2 | Integer32 | read-only | The number of members currently in a stack. |
| I32 hpnicfStackMaxConfigPriority | 1.3.6.1.4.1.11.2.14.11.15.2.91.1.3 | Integer32 | read-only | The highest priority that can be configured for a member in a stack. |
| INT hpnicfStackAutoUpdate | 1.3.6.1.4.1.11.2.14.11.15.2.91.1.4 | INTEGER | read-write | The function for automatically updating the image from the master to
a device that is attempting to join the stack.
When a new device tries to join a stack, STM verifies the image
consistency between the joining device and the master.
If the joining device uses a different image version than the master,
the function updates the joining device with the image of the master.
When this function is disabled, the new device can not join the stack
if it uses a different software version than the master.
disabled: disable auto update function
enabled: enable auto update function |
| INT hpnicfStackMacPersistence | 1.3.6.1.4.1.11.2.14.11.15.2.91.1.5 | INTEGER | read-write | The mode of bridge MAC address persistence. When a stack starts,
the bridge MAC address of the master is used as that of the stack.
When the master leaves the stack, the bridge MAC address of the
stack changes depending on the mode of bridge MAC address persistence.
notPersist: The bridge MAC address of the new master is used
as that of the stack immediately.
persistForSixMin: The original bridge MAC address will be reserved for six
minutes. In this period, if the master that has left rejoins the stack,
the bridge MAC address of the stack will not change.
If the old master does not rejoin the stack within this period, the
bridge MAC address of the new master will be used as that of the stack.
persistForever: Whether the master leaves or not, the bridge MAC address
of the stack will never change. |
| I32 hpnicfStackLinkDelayInterval | 1.3.6.1.4.1.11.2.14.11.15.2.91.1.6 | Integer32 | read-write | Delay for stack ports to report a link down event. If the link comes up
before the delay timer expires, the stack port will not report the link
down event. If the link is not recovered before the delay timer expires,
the stack port will report the change. If the delay is set to 0,
the stack ports will report a link down event without delay.
0: no delay
1-30000(ms): delay time |
| INT hpnicfStackTopology | 1.3.6.1.4.1.11.2.14.11.15.2.91.1.7 | INTEGER | read-only | Stack topology.
chainConn: daisy-chain connection
ringConn: ring connection |
| hpnicfStackDeviceConfigTable | 1.3.6.1.4.1.11.2.14.11.15.2.91.2 | | not-accessible | This table contains objects to manage device information in a stack. |
| hpnicfStackDeviceConfigEntry | 1.3.6.1.4.1.11.2.14.11.15.2.91.2.1 | | not-accessible | This table contains objects to manage device information in a stack. |
| I32 hpnicfStackMemberID | 1.3.6.1.4.1.11.2.14.11.15.2.91.2.1.1 | Integer32 | read-only | The member ID of the device in a stack. |
| I32 hpnicfStackConfigMemberID | 1.3.6.1.4.1.11.2.14.11.15.2.91.2.1.2 | Integer32 | read-write | The configured member ID of the device. The valid value ranges from
1 to the value in hpnicfStackMaxMember. The configured member ID will
take effect at a reboot if it is unique within the stack. |
| I32 hpnicfStackPriority | 1.3.6.1.4.1.11.2.14.11.15.2.91.2.1.3 | Integer32 | read-write | The priority of a device in the stack. The valid value ranges from
1 to the value in hpnicfStackMaxConfigPriority. |
| I32 hpnicfStackPortNum | 1.3.6.1.4.1.11.2.14.11.15.2.91.2.1.4 | Integer32 | read-only | The number of stack ports enabled in a device. |
| I32 hpnicfStackPortMaxNum | 1.3.6.1.4.1.11.2.14.11.15.2.91.2.1.5 | Integer32 | read-only | The maximum number of stack ports in a device. |
| hpnicfStackBoardConfigTable | 1.3.6.1.4.1.11.2.14.11.15.2.91.3 | | not-accessible | This table contains objects to manage MPU information for a stack. |
| hpnicfStackBoardConfigEntry | 1.3.6.1.4.1.11.2.14.11.15.2.91.3.1 | | not-accessible | This table contains objects to manage MPU information for a stack. |
| INT hpnicfStackBoardRole | 1.3.6.1.4.1.11.2.14.11.15.2.91.3.1.1 | INTEGER | read-only | The role of the MPU in a stack.
slave: Standby MPU
master: Master MPU
loading: Standby MPU is loading the software image from the master.
other: other |
| I32 hpnicfStackBoardBelongtoMember | 1.3.6.1.4.1.11.2.14.11.15.2.91.3.1.2 | Integer32 | read-only | Member ID of the device that holds the current board. |
| hpnicfStackPortInfoTable | 1.3.6.1.4.1.11.2.14.11.15.2.91.4 | | not-accessible | This table contains objects to manage stack port information
for IRF stacked devices. |
| hpnicfStackPortInfoEntry | 1.3.6.1.4.1.11.2.14.11.15.2.91.4.1 | | not-accessible | This table contains objects to manage stack port information
for IRF stacked devices. |
| I32 hpnicfStackPortIndex | 1.3.6.1.4.1.11.2.14.11.15.2.91.4.1.1 | Integer32 | accessible-for-notify | The index of a stack port of the device. |
| INT hpnicfStackPortEnable | 1.3.6.1.4.1.11.2.14.11.15.2.91.4.1.2 | INTEGER | read-only | The status of a stack port of the device. If no physical
ports are added to the stack port, its status is 'disabled'.
If the stack port has physical ports, its status is 'enabled'.
disabled: The stack port is disabled.
enabled: The stack port is enabled. |
| INT hpnicfStackPortStatus | 1.3.6.1.4.1.11.2.14.11.15.2.91.4.1.3 | INTEGER | read-only | The link status of a stack port on the device.
up: A physical link is present on the stack port.
down: No physical link is present on the stack port.
silent: The link state of the stack port is up,
but the port cannot transmit or receive traffic.
disabled: The stack port does not contain physical links. |
| I32 hpnicfStackNeighbor | 1.3.6.1.4.1.11.2.14.11.15.2.91.4.1.4 | Integer32 | read-only | The member ID of the stack port's neighbor. 0 means no
neighbor exists. |
| OCT hpnicfStackPortForwardingPath | 1.3.6.1.4.1.11.2.14.11.15.2.91.4.1.5 | OCTET STRING | read-only | List of egress member IDs on a stack port.
Each member device uses the egress member ID lists to choose the outgoing
stack port for known unicast frames to be sent out of other member devices.
The egress member ID lists are comma separated.
A zero-length string means no egress members exist.
For example:
In a ring stack of 1-2-3-4-5-7-1,
if hpnicfStackPortForwardingPath.1.1 returns '7,5,4',
IRF-port 1/1 will be the outgoing port for frames to reach members 7, 5,
and 4 from member 1. |
| hpnicfStackPhyPortInfoTable | 1.3.6.1.4.1.11.2.14.11.15.2.91.5 | | not-accessible | This table contains objects to manage information about physical
ports that can be used for IRF stacking. |
| hpnicfStackPhyPortInfoEntry | 1.3.6.1.4.1.11.2.14.11.15.2.91.5.1 | | not-accessible | This table contains objects to manage information about physical
ports that can be used for IRF stacking. |
| I32 hpnicfStackBelongtoPort | 1.3.6.1.4.1.11.2.14.11.15.2.91.5.1.1 | Integer32 | read-write | The index of the stack port to which the physical port is added.
0 means the physical port is not added to any stack port.
The value will take effect when IRF is enabled on the device. |
| hpnicfStackTrap | 1.3.6.1.4.1.11.2.14.11.15.2.91.6 | | | |
| hpnicfStackTrapOjbects | 1.3.6.1.4.1.11.2.14.11.15.2.91.6.0 | | | |
| NTF hpnicfStackPortLinkStatusChange | 1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.1 | | | The hpnicfStackPortLinkStatusChange trap indicates that the link status
of the stack port has changed. |
| NTF hpnicfStackTopologyChange | 1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.2 | | | The hpnicfStackTopologyChange trap indicates that the topology type of
the IRF stack has changed. |
| NTF hpnicfStackMadBfdChangeNormal | 1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.3 | | | The hpnicfStackMadBfdChangeNormal trap indicates that the BFD MAD function
changed to the normal state. |
| NTF hpnicfStackMadBfdChangeFailure | 1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.4 | | | The hpnicfStackMadBfdChangeFailure trap indicates that the BFD MAD function
changed to the failure state. |
| NTF hpnicfStackMadLacpChangeNormal | 1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.5 | | | The hpnicfStackMadLacpChangeNormal trap indicates that the LACP MAD function
changed to the normal state. |
| NTF hpnicfStackMadLacpChangeFailure | 1.3.6.1.4.1.11.2.14.11.15.2.91.6.0.6 | | | The hpnicfStackMadLacpChangeFailure trap indicates that the LACP MAD function
changed to the failure state. |
