All MIBs › HPN-ICF-STACK-MIB › hpnicfStackAutoUpdate
hpnicfStackAutoUpdate
Module: HPN-ICF-STACK-MIB
OID (symbolic): HPN-ICF-STACK-MIB::hpnicfStackAutoUpdate
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.91.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The function for automatically updating the image from the master to a device that is attempting to join the stack. When a new device tries to join a stack, STM verifies the image consistency between the joining device and the master. If the joining device uses a different image version than the master, the function updates the joining device with the image of the master. When this function is disabled, the new device can not join the stack if it uses a different software version than the master.
disabled: disable auto update function enabled: enable auto update function
What is hpnicfStackAutoUpdate?
Controls whether a joining stack member automatically gets its software image updated to match the stack master if versions differ (default behavior depends on device, values enabled/disabled). An admin would enable this so a newly racked switch with older firmware can join the stack without a manual upgrade first; leaving it disabled blocks a mismatched device from joining at all.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.91.1.4 snmpwalk -v2c -c public <target> HPN-ICF-STACK-MIB::hpnicfStackAutoUpdate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.91.1.4.1 snmpget -v2c -c public <target> HPN-ICF-STACK-MIB::hpnicfStackAutoUpdate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.91.1.4.1 i <value>
Start monitoring HP/H3C Comware switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-STACK-MIB::hpnicfStackAutoUpdate OID value, configure state conditions and alerts, and monitor any HP/H3C Comware switches from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.91 | hpnicfStack | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.91.1 | hpnicfStackGlobalConfig | HPN-ICF-STACK-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.91.1.4 | hpnicfStackAutoUpdate | HPN-ICF-STACK-MIB |