All MIBs › HPN-ICF-SNA-DLSW-EXT-MIB › hpnicfdeNodeConfigSapList
hpnicfdeNodeConfigSapList
Module: HPN-ICF-SNA-DLSW-EXT-MIB
OID (symbolic): HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeConfigSapList
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.15
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: The SAP list indicates which SAPs are allowed. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most significant bit representing the SAP 2, to the least significant bit of the last octet representing the SAP 254. Data link switching is allowed for those SAPs which have one in its corresponding bit, not allowed otherwise. The whole SAP list has to be changed together. Changing the SAP list affects only new circuit establishments and has no effect on established circuits.
This list can be used to restrict specific partners from knowing about all the SAPs used by DLSw on all its interfaces (these are represented in hpnicfdeIfSapList for each interface). For instance, one may want to run NetBIOS with some partners but not others.
If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. When to start the run-time capabilities exchange is implementation-specific.
The DEFVAL below indicates support for SAPs 0, 2, 4, 6, 8, A, C and E.
What is hpnicfdeNodeConfigSapList?
A 16-byte bitmap of which even-numbered SAPs (0 through 254) this DLSw node allows to be switched, one bit per SAP; changing it affects only new circuits, not ones already established. The default enables SAPs 0, 2, 4, 6, 8, A, C and E, letting an admin restrict which SAPs (e.g. NetBIOS's) are advertised to specific peers.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.15 snmpwalk -v2c -c public <target> HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeConfigSapList
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.15.1 snmpget -v2c -c public <target> HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeConfigSapList.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.15.1 s <value>
Start monitoring HP/H3C Comware WAN router running DLSw for SNA bridging (extended config) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-SNA-DLSW-EXT-MIB::hpnicfdeNodeConfigSapList OID value, configure state conditions and alerts, and monitor any HP/H3C Comware WAN router running DLSw for SNA bridging (extended config) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.62 | hpnicfDlswExt | HPN-ICF-OID-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.62.1 | hpnicfDlswExtMIBObjects | HPN-ICF-SNA-DLSW-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1 | hpnicfdeNode | HPN-ICF-SNA-DLSW-EXT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.15 | hpnicfdeNodeConfigSapList | HPN-ICF-SNA-DLSW-EXT-MIB |