HPN-ICF-RCP-MIB

All MIBs › HPN-ICF-RCP-MIB

Last Updated: 2006-09-20

Category: Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages Remote Configuration Protocol (RCP) sessions for command execution on HP/Comware device clusters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-RCP-MIB?

HPN-ICF-RCP-MIB is an HP Networking (Comware/H3C) vendor MIB for managing the Remote Configuration Protocol (RCP) server, a facility used to execute remote configuration/command sessions against clustered devices. It exposes server enable status, connection and rule timeout settings (with their configurable maximum values), the maximum and current number of concurrent connections, and load-balance group ID range limits, alongside counts of total users and total client IPs currently using the service. For hardware/software status monitoring, the current-versus-maximum connection count is directly useful for detecting when the RCP server is nearing its connection capacity, and the total-users/total-client-IPs counters help an operator confirm how heavily the remote-configuration service is being used, flagging unexpected load or a runaway client. It is a vendor-specific service-management MIB with no strong stated dependency on other standard MIBs. It is deployed on HP/H3C Comware devices acting as cluster management points where remote configuration sessions to member devices are coordinated through RCP. Engineers can download the HPN-ICF-RCP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-RCP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware cluster management device

Monitoring Examples

An administrator would check hpnicfRCPServerEnableStatus to confirm the RCP service is running, then compare hpnicfRCPServerCurConn against hpnicfRCPServerMaxConn to see how close the server is to its connection ceiling. The hpnicfRCPTotalUsers and hpnicfRCPTotalClientIPs counters would be polled to track how many distinct users/clients are currently using the service, and hpnicfRCPConnTimeout/hpnicfRCPRuleTimeout (versus their max-value counterparts hpnicfRCPConnTimeoutMaxValue/hpnicfRCPRuleTimeoutMaxValue) would be reviewed to confirm timeout settings are within supported bounds after a configuration change.

What Can Be Monitored

RCP server enable status
current vs. maximum connections
connection/rule timeout settings
total connected users
total distinct client IPs

Imported Objects

From HPN-ICF-OID-MIB

hpnicfRCP

OBJECT-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfRCPMIB	1.3.6.1.4.1.11.2.14.11.15.2.73.1			The MIB module is used for managing RCP protocol server.
hpnicfRCPLeaf	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1
T/F hpnicfRCPServerEnableStatus	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.1	TruthValue	read-write	This attribute controls the system wide operation of RCP server. The value TRUE means that the RCP server is enabled. The value FALSE means that the RCP server is disabled.
I32 hpnicfRCPConnTimeout	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.2	Integer32	read-write	Specifies the maximum time in seconds that a RCP client connection is idle.
I32 hpnicfRCPRuleTimeout	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.3	Integer32	read-write	Specifies the time in seconds before a RCP rule is aged out. If its value is 0, it indicates RCP rule will not be aged out.
I32 hpnicfRCPServerMaxConn	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.4	Integer32	read-write	Specifies the maximum number of clients that permitted to connect with RCP server at the same time.
I32 hpnicfRCPServerCurConn	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.5	Integer32	read-only	The current actual number of clients that connecting with RCP server.
I32 hpnicfRCPConnTimeoutMaxValue	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.6	Integer32	read-only	Specifies the maximum value of hpnicfRCPConnTimeout.
I32 hpnicfRCPRuleTimeoutMaxValue	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.7	Integer32	read-only	Specifies the maximum value of hpnicfRCPRuleTimeout.
I32 hpnicfRCPServerMaxConnMaxValue	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.8	Integer32	read-only	Specifies the maximum value of hpnicfRCPServerMaxConn.
I32 hpnicfRCPBalanceGroupIdMinValue	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.9	Integer32	read-only	Specifies the minimum value of balance group identity.
I32 hpnicfRCPBalanceGroupIdMaxValue	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.10	Integer32	read-only	Specifies the maximum value of balance group identity.
I32 hpnicfRCPTotalUsers	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.11	Integer32	read-only	Specifies the total number of RCP user.
I32 hpnicfRCPTotalClientIPs	1.3.6.1.4.1.11.2.14.11.15.2.73.1.1.12	Integer32	read-only	Specifies the total number of RCP client IP.
hpnicfRCPTable	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2
hpnicfRCPUserTable	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1		not-accessible	RCP User Info Table.
hpnicfRCPUserEntry	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1		not-accessible	The entry of hpnicfRCPUserTable.
STR hpnicfRCPUserName	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1.1	DisplayString	not-accessible	The name of RCP user.
STR hpnicfRCPUserPassword	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1.2	DisplayString	read-create	The password of RCP user. It is invisible to users and displayed as '***'.
NUM hpnicfRCPUserRedirectInterface	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1.3	InterfaceIndexOrZero	read-create	The redirect interface index of RCP user. The RCP rule assigned by the user can be associated with the redirect interface. If the redirect interface is invalid, its value is set to be 0.
I32 hpnicfRCPUserRedirectBalanceGroup	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1.4	Integer32	read-create	The redirect balance group identity of RCP user. The RCP rule assigned by the user can be associated with the redirect balance group. If the balance group is invalid, its value is set to be 0.
ROW hpnicfRCPUserRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.1.1.5	RowStatus	read-create	This manages the creation and deletion of rows, and shows the current status of the indexed user name. This object has the following values. active(1) The indexed user name is configured on the device. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Create a new user. createAndWait(5) Not Supported. destroy(6) Delete this entry. The associated entry can be modified when the value of hpnicfRCPUserRowStatus is active(1). When deleting an inexistence entry, return noError.
hpnicfRCPClientIPTable	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.2		not-accessible	RCP Client IP Table.
hpnicfRCPClientIPEntry	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.2.1		not-accessible	The entry of hpnicfRCPClientIPTable.
IPt hpnicfRCPClientIPType	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.2.1.1	InetAddressType	not-accessible	The IP address type (IPv4 or IPv6) of RCP client.
IP hpnicfRCPClientIP	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.2.1.2	InetAddress	not-accessible	The IP address of RCP client.
ROW hpnicfRCPClientIPRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.2.1.3	RowStatus	read-create	This manages the creation and deletion or rows, and shows the current status of the indexed client IP address. This object has the following values. active(1) The indexed client IP is configured on the device. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Create a new client IP. createAndWait(5) Not Supported. destroy(6) Delete this entry. The associated entry can be modified when the value of hpnicfRCPClientIPRowStatus is active(1). When deleting an inexistence entry, return noError.
hpnicfRCPSessionTable	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3		not-accessible	RCP session Table.
hpnicfRCPSessionEntry	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1		not-accessible	The entry of hpnicfRCPSessionTable.
I32 hpnicfRCPSessionId	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1.1	Integer32	not-accessible	RCP session identity.
IPt hpnicfRCPSessionClientIPType	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1.2	InetAddressType	read-only	The IP address type (IPv4 or IPv6) of RCP client.
IP hpnicfRCPSessionClientIP	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1.3	InetAddress	read-only	RCP client IP address.
INT hpnicfRCPSessionRunningStatus	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1.4	INTEGER	read-only	RCP server running status. It is one of the following status: connected: The connection is established and the RCP client is waiting for authentication. operational: The RCP client is authenticated and the server is ready for rule configuration request.
STR hpnicfRCPSessionUserName	1.3.6.1.4.1.11.2.14.11.15.2.73.1.2.3.1.5	DisplayString	read-only	RCP user name.

RFC description

Manages RCP (Remote Copy Protocol) server configuration, connections, and rule management.

Start monitoring HP/H3C Comware cluster management device (Remote Configuration Protocol) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-RCP-MIB

What Is HPN-ICF-RCP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description