HPN-ICF-DOT11-ROAM-MIB

All MIBs › HPN-ICF-DOT11-ROAM-MIB

Last Updated: 2010-08-04

Category: Technology: Wireless, Vendor: H3C/HH3C, Vendor: HP/HPE, Wireless and WLAN

Description: HP Networking ICF SNMP MIB for 802.11 wireless client roaming configuration and fast-roaming statistics on HP WLAN devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-DOT11-ROAM-MIB?

HPN-ICF-DOT11-ROAM-MIB is an H3C/HPE Networking (ICF) proprietary MIB configuring WLAN mobility-group Layer 3 roaming between wireless controllers. Its mobility-group table, keyed by name, records tunnel type, source IP, auth mode/key, enable flag, and row status, a member table records member IP/status/interface/uptime, and roam-in/roam-out info tables record client MAC, BSSID, VLAN ID, and the home/foreign AC's IP type/address. As a configuration/status MIB it lets an administrator confirm mobility-group membership and track a roaming client's home controller. It is deployed on H3C/HPE Networking (ICF-based) wireless controllers. Engineers can download the HPN-ICF-DOT11-ROAM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-DOT11-ROAM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/HPE Networking (ICF-based) wireless controllers

Monitoring Examples

An administrator checks hpnicfDot11RoamInHomeACIPAddr to confirm which home controller a roaming wireless client came from on an H3C/HPE ICF mobility group.

What Can Be Monitored

WLAN mobility-group membership and client roaming events

Imported Objects

From HPN-ICF-DOT11-REF-MIB

hpnicfDot11

MODULE-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfDot11IntraACRoamingSuccCnt2 OID:

Select an H3C/HPE Networking (ICF-based) wireless controller (mobility-group roaming) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfDot11IntraACRoamingSuccCnt2 into the Find box to locate it in the OID tree, then select it and click OK. Represents the count of client successfully roam Intra-AC in Counter32. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfDot11ROAM	1.3.6.1.4.1.11.2.14.11.15.2.75.10			This MIB provides information about WLAN roaming configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. HA The AC to which a wireless station is connected by associating with an AP for the first time is the HA of the station. FA An AC that is other than the HA and to which a station is currently connected is an FA of the station. Fast-roam capable station A wireless station which directly associates to a fast-roam service (rsn+dot1X) with one AC for the first time. Roam-out station A wireless station which has associated with an AC other than the HA in the mobility-group is referred to as a roam-out station at its HA. Roam-in station A wireless station which has associated with an AC other than the HA in the mobility-group is referred to as a roam-in station at the FA. Intra-AC roaming A procedure where a wireless station roams from one AP to another AP, which are connected to the same AC. Inter-AC roaming A procedure where a wireless station roams from one AP to another AP, which are connected to different ACs. Inter-AC fast roaming capability If a station uses 802.1x (RSN) authentication through negotiation, this station has inter-AC fast roaming capability. WLAN-tunnel One type of layer 2 interface which is bound with an IACTP data tunnel and used to tunnel unicast/broadcast frames between ACs.
hpnicfDot11RoamCfgGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1
hpnicfDot11MobGrpTable	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1		not-accessible	The table defines the parameters for roaming group configuration.
hpnicfDot11MobGrpEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1		not-accessible	This entry contains information of mobile group.
OCT hpnicfDot11MobGrpName	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.1	OCTET STRING	not-accessible	Represents the name of roam group.
HPN hpnicfdot11MobGrpTunnelType	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.2	HpnicfDot11RoamMobileTunnelType	read-create	Represents the protocol type of mobility-tunnel.
IP hpnicfDot11MobGrpSrcIPAddr	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.3	InetAddress	read-create	Represents the IP address of tunnel source. The IP address type must be the same as hpnicfdot11MobGrpTunnelType. The default value is zero.
HPN hpnicfDot11MobGrpAuthMode	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.4	HpnicfDot11RoamAuthMode	read-create	Represents the authentication mode of IACTP tunnel. This object can be used to enable IACTP control message integrity authentication.
OCT hpnicfDot11MobGrpAuthKey	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.5	OCTET STRING	read-create	Represents the authentication key of IACTP tunnel. Authentication key to be used with the given authentication method. This object can not be modified when the value of hpnicfDot11MobGrpAuthMode is 'none'.
T/F hpnicfDot11MobGrpEnable	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.6	TruthValue	read-create	State of a mobile group. 'true' : The WLAN mobility group will be enabled. 'false' : The inter-AC tunnel communication for the mobility group will be disabled. A mobility group can be enabled only when the source IP address is configured. The other objects in this entry can become effective only when mobility group is enabled. The other objects in this entry can not be modified after enabling mobility group.
ROW hpnicfDot11MobGrpRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.1.1.7	RowStatus	read-create	The status of this table entry.
hpnicfDot11MobGrpMemberTable	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2		not-accessible	The table defines the parameters for roaming member configuration.
hpnicfDot11MobGrpMemberEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1		not-accessible	This entry contains information of mobile group member.
IP hpnicfDot11MobGrpMemberIpAddr	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1.1	InetAddress	not-accessible	Represents the IP address of group member. It can not be the same as the source IP address of the mobile group. The address type must be the same as the hpnicfdot11MobGrpTunnelType.
HPN hpnicfDot11MobGrpMemberStatus	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1.2	HpnicfDot11RoamIACTPStatus	read-only	Represents the status of group member.
OCT hpnicfDot11MobGrpMemberIf	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1.3	OCTET STRING	read-only	Represents the tunnel interface name of group member.
I32 hpnicfDot11MobGrpMemberUpTime	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1.4	Integer32	read-only	Represents the sustaining time from tunnel up. If tunnel is down, MemberUpTime is zero.
ROW hpnicfDot11MobGrpMemberRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.75.10.1.2.1.5	RowStatus	read-create	The status of this table entry.
hpnicfDot11RoamStatusGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2
hpnicfDot11RoamInInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1		not-accessible	The table can used to display the information of roaming in client.
hpnicfDot11RoamInInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1		not-accessible	This entry contains information of roaming in client.
MAC hpnicfDot11RoamClientMAC	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1.1	MacAddress	not-accessible	Represents the MAC address of roaming in client.
MAC hpnicfDot11RoamInClientBSSID	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1.2	MacAddress	read-only	Represents BSSID of the AP to which the Roam-In client is associated.
I32 hpnicfDot11RoamInClientVlanID	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1.3	Integer32	read-only	Represents the VLAN ID of Roam-In client.
IPt hpnicfDot11RoamInHomeACIPType	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1.4	InetAddressType	read-only	Represents the protocol type of home AC address.
IP hpnicfDot11RoamInHomeACIPAddr	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.1.1.5	InetAddress	read-only	Represents the address of home AC.
hpnicfDot11RoamOutInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2		not-accessible	The table can used to display the information of roaming out client.
hpnicfDot11RoamOutInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1		not-accessible	This entry contains information of roaming out client.
MAC hpnicfDot11RoamOutClientBSSID	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1.1	MacAddress	read-only	Represents the BSSID of the AP to which the Roam-Out client is associated.
I32 hpnicfDot11RoamOutClientVlanID	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1.2	Integer32	read-only	Represents the VLAN ID of Roam-Out client.
IPt hpnicfDot11RoamOutForeignACIPType	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1.3	InetAddressType	read-only	Represents the protocol type of foreign AC address.
IP hpnicfDot11RoamOutForeignACIPAddr	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1.4	InetAddress	read-only	Represents the address of foreign AC.
I32 hpnicfDot11RoamOutClientUpTime	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.2.1.5	Integer32	read-only	Represents how long the Roam-Out client is associated with the foreign AC.
hpnicfDot11RoamTrackTable	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3		not-accessible	The table contains the roam-track information of a specified client on the client's HA.
hpnicfDot11RoamTrackEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1		not-accessible	This entry contains information of a specified client on the client's HA.
I32 hpnicfDot11RoamTrackIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.1	Integer32	not-accessible	Represents the index of this entry.
MAC hpnicfDot11RoamTrackClientMAC	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.2	MacAddress	read-only	Represents the MAC address of the roamed client.
MAC hpnicfDot11RoamTrackBSSID	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.3	MacAddress	read-only	Represents the BSSID of the AP with which the client is associated.
I32 hpnicfDot11RoamTrackUpTime	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.4	Integer32	read-only	Represents how long the client is associated with the BSSID.
IPt hpnicfDot11RoamTrackACIPType	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.5	InetAddressType	read-only	Represents the protocol type of the IP address of the access controller with which the client is connected.
IP hpnicfDot11RoamTrackACIPAddr	1.3.6.1.4.1.11.2.14.11.15.2.75.10.2.3.1.6	InetAddress	read-only	Represents the IP address of the access controller with which the client is connected.
hpnicfDot11RoamStatisGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.10.3
I32 hpnicfDot11IntraACRoamingSuccCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.10.3.1	Integer32	read-only	Represents the count of client successfully roam Intra-AC.
I32 hpnicfDot11InterACRoamingSuccCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.10.3.2	Integer32	read-only	Represents the count of client successfully roam in Inter-AC.
I32 hpnicfDot11InterACRoamOutSuccCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.10.3.3	Integer32	read-only	Represents the count of client successfully roam out Inter-AC.
hpnicfDot11RoamStatis2Group	1.3.6.1.4.1.11.2.14.11.15.2.75.10.4
C32 hpnicfDot11IntraACRoamingSuccCnt2Ex	1.3.6.1.4.1.11.2.14.11.15.2.75.10.4.1	Counter32	read-only	Represents the count of client successfully roam Intra-AC in Counter32.
C32 hpnicfDot11InterACRoamingSuccCnt2	1.3.6.1.4.1.11.2.14.11.15.2.75.10.4.2	Counter32	read-only	Represents the count of client successfully roam in Inter-AC in Counter32.
C32 hpnicfDot11InterACRoamOutSuccCnt2	1.3.6.1.4.1.11.2.14.11.15.2.75.10.4.3	Counter32	read-only	Represents the count of client successfully roam out Inter-AC in Counter32.

RFC description

WLAN roaming configuration and statistics for wireless access controllers managing mobile client transitions.

Start monitoring H3C/HPE Networking (ICF-based) wireless controller (mobility-group roaming) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-DOT11-ROAM-MIB