HPN-ICF-DOT11-ACMT-MIB

All MIBs › HPN-ICF-DOT11-ACMT-MIB

Last Updated: 2010-08-04

Category: Technology: Wireless, Vendor: H3C/HH3C, Vendor: HP/HPE, Wireless and WLAN

Description: HP Networking ICF SNMP MIB for 802.11 wireless AC (access controller) management table on HP WLAN networking devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-DOT11-ACMT-MIB?

HPN-ICF-DOT11-ACMT-MIB is an H3C/HPE Networking (ICF) proprietary MIB reporting wireless AC (Access Controller) and CAPWAP tunnel information between AP and AC, with AC-backup (redundancy) extensions. Its objects cover current AC MAC mode, max AP/station count permitted, a run-AP-number threshold, AP/station connect counts, an AC-interface load-info table (ifIndex, AP/station count, interface name), master/slave/auto-connected/persistent AP counts, upload/download frame counts and bytes, and AC-backup role/NMS-IP, backup mode/status, and switch count. As a performance/status MIB it lets an administrator watch AC capacity utilization and confirm AC-backup redundancy status on an H3C/HPE ICF wireless controller. It is deployed on H3C/HPE Networking (ICF-based) wireless controllers. Engineers can download the HPN-ICF-DOT11-ACMT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-DOT11-ACMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C/HPE Networking (ICF-based) wireless controllers

Monitoring Examples

An administrator checks hpnicfDot11ACBackupStatus and hpnicfDot11ACSwitchCnt to confirm AC-backup redundancy health on an H3C/HPE ICF wireless controller.

What Can Be Monitored

AC/AP capacity and AC-backup redundancy status

Imported Objects

From HPN-ICF-DOT11-REF-MIB

HpnicfDot11MACModeType
HpnicfDot11ObjectIDType
HpnicfDot11TunnelSecSchemType
hpnicfDot11	MODULE-IDENTITY

From IANAifType-MIB

IANAifType

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

MacAddress

How to Use in IPNetwork Monitor

Example using hpnicfDot11AcUploadFrameCnt OID:

Select an H3C/HPE Networking (ICF-based) wireless controller (AC/CAPWAP tunnel management) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfDot11AcUploadFrameCnt into the Find box to locate it in the OID tree, then select it and click OK. Represents the number of frames that AP sends to AC through LWAPP tunnel. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfDot11ACMT	1.3.6.1.4.1.11.2.14.11.15.2.75.1			This MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
hpnicfDot11ACObjectGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1
hpnicfDot11ACObject	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1
HPN hpnicfDot11CurrentACMACMode	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.1	HpnicfDot11MACModeType	read-only	Represents which MAC mode defined in the CAPWAP draft is in use for the AC.
I32 hpnicfDot11MaxAPNumPermitted	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.2	Integer32	read-only	Represents the maximum number of AP connection permitted for one AC.
I32 hpnicfDot11MaxStationNumPermitted	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.3	Integer32	read-only	Represents the maximum number of station connection permitted for one AC.
I32 hpnicfDot11RunAPNumThreshold	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.4	Integer32	read-write	When the percentage of run AP number is larger than this threshold, a notification will be sent.
hpnicfDot11ACLoadInfo	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2
I32 hpnicfDot11APConnectCount	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.1	Integer32	read-only	Represents the total number of APs which are connecting to AC.
I32 hpnicfDot11StationConnectCount	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.2	Integer32	read-only	Represents the total number of stations which are accessing the WLAN service through AC.
hpnicfDot11ACIFLoadInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3		not-accessible	Represents AP number information of interface.
hpnicfDot11ACIFLoadInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1		not-accessible	Each entry represents AP number information of an interface
I32 hpnicfDot11ACIfIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.1	Integer32	accessible-for-notify	Represents index of AC interface.
I32 hpnicfDot11ACIfApNum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.2	Integer32	read-only	Represents AP number connected to the AC interface.
I32 hpnicfDot11ACIfStaNum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.3	Integer32	read-only	Represents Station number connected to the AC interface.
OCT hpnicfDot11ACIfName	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.4	OCTET STRING	read-only	Represents InterfaceName AP number connected to AC interface.
I32 hpnicfDot11MasterAPCount	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.4	Integer32	read-only	Represents the total number of AP which have established the master tunnel with AC.
I32 hpnicfDot11SlaveAPCount	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.5	Integer32	read-only	Represents the total number of AP which have established the slave tunnel with AC.
I32 hpnicfDot11ConnectAutoAPCount	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.6	Integer32	read-only	Represents the total number of auto APs that are connecting to AC.
I32 hpnicfDot11PersistentAPCount	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.7	Integer32	read-only	Represents the total number of persistent AP.
C64 hpnicfDot11AcUploadFrameCntEx	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.8	Counter64	read-only	Represents the number of frames that AP sends to AC through LWAPP tunnel.
C64 hpnicfDot11AcDownloadFrameCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.9	Counter64	read-only	Represents the number of frames that AC sends to AP through LWAPP tunnel.
C64 hpnicfDot11AcUploadFrameBytes	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.10	Counter64	read-only	Represents the bytes of frames that AP sends to AC through LWAPP tunnel.
C64 hpnicfDot11AcDownloadFrameBytes	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.11	Counter64	read-only	Represents the bytes of frames that AC sends to AP through LWAPP tunnel.
INT hpnicfDot11BackupACRole	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.12	INTEGER	read-only	This object represents the Identity of the AC null: Not configured master: Master AC slave: Slave AC.
IP hpnicfDot11BackupACNMSIP	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.13	IpAddress	read-only	This object represents the manger IP address of the slave ac.
INT hpnicfDot11ACBackupMode	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.14	INTEGER	read-only	This object represents the ac backup mode.
INT hpnicfDot11ACBackupStatus	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.15	INTEGER	read-only	This object represents the ac backup status.
I32 hpnicfDot11ACSwitchCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.16	Integer32	read-only	This object represents the ac switch times.
C64 hpnicfDot11ACSouthifPacketOutputCount	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.17	Counter64	read-only	Represents the count of output packets with the down-link interface.
C64 hpnicfDot11ACSouthifPacketOutputBytes	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.18	Counter64	read-only	Represents the bytes of output packets with the down-link interface.
C64 hpnicfDot11ACSouthifPacketInputCount	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.19	Counter64	read-only	Represents the count of input packets with the down-link interface.
C64 hpnicfDot11ACSouthifPacketInputBytes	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.20	Counter64	read-only	Represents the bytes of input packets with the down-link interface.
I32 hpnicfDot11TotalAPconnected	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.21	Integer32	read-only	Represents the total number of AP which are connected to AC.
I32 hpnicfDot11RemainingAPcapacity	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.22	Integer32	read-only	Represents the remaining AP capacity of the AC.
hpnicfDot11WLANAssocStatisInfo	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3
C32 hpnicfDot11StationAssocSum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.1	Counter32	read-only	Represents the total number of station association.
C32 hpnicfDot11StationAssocFailSum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.2	Counter32	read-only	Represents the total number of station association failure.
C32 hpnicfDot11StationReassocSum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.3	Counter32	read-only	Represents the total number of station reassociation.
C32 hpnicfDot11StationAssocRejectedSum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.4	Counter32	read-only	Represents the total number of station association rejected on account of resource limit.
C32 hpnicfDot11StationExDeAuthenSum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.5	Counter32	read-only	Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP).
I32 hpnicfDot11StationCurAssocSum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.6	Integer32	read-only	Represents the total number of current associated stations.
C32 hpnicfDot11StationAssocReqSum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.7	Counter32	read-only	Represents the total number of station association request.
C32 hpnicfDot11StationReassocReqSum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.8	Counter32	read-only	Represents the total number of station reassociation request.
C32 hpnicfDot11StationReassocFailSum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.9	Counter32	read-only	Represents the total number of station reassociation failure.
hpnicfDot11ACBASInfo	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4
hpnicfDot11ACBASSysObjects	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.1
hpnicfDot11ACBASTableObjects	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2
hpnicfDot11ACBASIfTable	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3		not-accessible	Represents the BAS information of interfaces.
hpnicfDot11ACBASIfEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1		not-accessible	Each entry represents the BAS information of an interface
I32 hpnicfDot11ACBASIfIndex	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.1	Integer32	not-accessible	The ifIndex of the BAS interface.
OCT hpnicfDot11ACBASIfDescr	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.2	OCTET STRING	read-only	A textual string containing information about the BAS interface.
IAN hpnicfDot11ACBASIfType	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.3	IANAifType	read-only	The type of the BAS interface.
hpnicfDot11ACStaUserSecAuthStatis	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5
I32 hpnicfDot11ACStaUserAuthCurNumber	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.1	Integer32	read-only	Represents the current number of user authenticated with this AC.
C32 hpnicfDot11ACStaUserConnFailCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.2	Counter32	read-only	Represents the total number of user disconnected with this AC.
C32 hpnicfDot11ACStaUserAuthReqCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.3	Counter32	read-only	Represents the total number of user authenticate request with this AC.
C32 hpnicfDot11ACStaUserAuthSuccCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.4	Counter32	read-only	Represents the total number of users authenticated successful with this AC.
C32 hpnicfDot11ACStaUserAuthFailCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.5	Counter32	read-only	Represents the total number of user authenticated failed with this AC.
C32 hpnicfDot11ACStaUserAllAuthCntCM	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.6	Counter32	read-only	Represents the total number of users authenticated with this AC.
hpnicfDot11ACStaSecAuthTypeStatis	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6
I32 hpnicfDot11ACStaUserPortalOnlineNum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.1	Integer32	read-only	Represents the number of online portal users authenticated by RADIUS, including MAC-trigger and IMSIAuth users.
I32 hpnicfDot11ACStaUserFreeAuthOnlineNum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.2	Integer32	read-only	Numbers of online user is no need authenticated.
I32 hpnicfDot11ACStaUserAssociateAuthOnlineNum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.3	Integer32	read-only	Represents the number of online users authenticated by associated authentication, excluding AutoAuth users.
I32 hpnicfDot11ACStaUserMacAuthOnlineNum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.4	Integer32	read-only	The numbers of online user which is launched authentication by MAC address and authenticated by Radius.
C32 hpnicfDot11ACStaUserPortalLostConnectionCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.5	Counter32	read-only	For PortalAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
C32 hpnicfDot11ACStaUserFreeAuthLostConnectionCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.6	Counter32	read-only	For FreeAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
C32 hpnicfDot11ACStaUserAssociateAuthLostConnectionCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.7	Counter32	read-only	For AssociateAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
C32 hpnicfDot11ACStaUserMacAuthLostConnectionCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.8	Counter32	read-only	For MacAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
C32 hpnicfDot11ACStaPortalAuthReqCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.9	Counter32	read-only	Represents PortalAuth request count after AP up.
C32 hpnicfDot11ACStaAssociateAuthReqCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.10	Counter32	read-only	Represents AssociateAuth request count after AP up.
C32 hpnicfDot11ACStaMacAuthReqCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.11	Counter32	read-only	Represents MacAuth request count after AP up.
C32 hpnicfDot11ACStaPortalAuthSuccCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.12	Counter32	read-only	Represents count of PortalAuth authenticated successfully after AP up.
C32 hpnicfDot11ACStaAssociateAuthSuccCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.13	Counter32	read-only	Represents count of AssociateAuth authenticated successfully after AP up.
C32 hpnicfDot11ACStaMacAuthSuccCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.14	Counter32	read-only	Represents count of MacAuth authenticated successfully after AP up.
C32 hpnicfDot11ACStaPortalAuthReqFailCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.15	Counter32	read-only	Represents count of PortalAuth failure in request after AP up.
C32 hpnicfDot11ACStaAssociateAuthReqFailCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.16	Counter32	read-only	Represents count of AssociateAuth failure in request after AP up.
C32 hpnicfDot11ACStaMacAuthReqFailCnt	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.17	Counter32	read-only	Represents count of MacAuth failure in request after AP up.
I32 hpnicfDot11ACStaUserAutoAuthOnlineNumCM	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.18	Integer32	read-only	Represents the number of online users authenticated by auto authentication.
C32 hpnicfDot11ACStaUserAutoAuthLostConnectionCntCM	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.19	Counter32	read-only	Represents the disconnection count of AutoAuth users, excluding the ones who disconnect AP by themselves.
C32 hpnicfDot11ACStaAutoAuthReqCntCM	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.20	Counter32	read-only	Represents the count of AutoAuth requests after AP up.
C32 hpnicfDot11ACStaAutoAuthSuccCntCM	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.21	Counter32	read-only	Represents the count of successful AutoAuth authentications after AP up.
C32 hpnicfDot11ACStaAutoAuthReqFailCntCM	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.22	Counter32	read-only	Represents the count of failed AutoAuth requests after AP is up.
hpnicfDot11ACPortalStatisticCMTable	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7		not-accessible	The table describes portal statistics information.
hpnicfDot11ACPortalStatisticCMEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1		not-accessible	Each entry contains the portal statistics information of an SSID.
OCT hpnicfDot11ACPortalStatisticSSIDCM	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.1	OCTET STRING	not-accessible	Represents the service policy name.
C32 hpnicfDot11ACPortalStatAuthReqCM	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.2	Counter32	read-only	Represents the total number of portal authentication requests from portal server to AC.
C32 hpnicfDot11ACPortalStatAuthRespCM	1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.3	Counter32	read-only	Represents the total number of portal authentication responses from AC to portal server.
hpnicfDot11CAPWAPTunnelGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.1.2
hpnicfDot11CAPWAPTunnelTable	1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1		not-accessible	The table will list all the APs which are connecting to the AC by the CAPWAP tunnel protocol.
hpnicfDot11CAPWAPTunnelEntry	1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1		not-accessible	Each entry contains information of data tunnel and control tunnel of AP which is connecting to AC.
HPN hpnicfDot11CurrTunnelAPID	1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.1	HpnicfDot11ObjectIDType	accessible-for-notify	To uniquely identify the CAPWAP tunnel set up between the AP identified by APID and a specific AC.
HPN hpnicfDot11CtrlTunnelCurrSec	1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.2	HpnicfDot11TunnelSecSchemType	read-only	Represents what security scheme is in use for control tunnel.
I32 hpnicfDot11CtrlTunnelUpTime	1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.3	Integer32	read-only	Represents how long for control tunnel up. If the value is zero, then tunnel is not set up.
HPN hpnicfDot11DataTunnelCurrSec	1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.4	HpnicfDot11TunnelSecSchemType	read-only	Represents what security scheme is in use for data tunnel.
I32 hpnicfDot11DataTunnelUpTime	1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.5	Integer32	read-only	Represents how long for data tunnel up. If the value is zero, then tunnel is not set up.
TIK hpnicfDot11CtrlTunnelUpTimeTicks	1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.6	TimeTicks	read-only	Represents how long control tunnel is up. If the value is zero, then tunnel is not set up.
hpnicfDot11ACMtNotifyGroup	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3
hpnicfDot11ACMtTraps	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0
NTF hpnicfDot11ACMtTunnelSetupTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.1			This notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel.
NTF hpnicfDot11ACMtTunnelDownTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.2			This notification is sent by AC when CAPWAP tunnel becomes down. By this way, NMS will immediately know tunnel down event. It is unnecessary to identify whether it is control or data tunnel.
NTF hpnicfDot11ACMtBackupSwtTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.3			This trap is sent by AC when AC switches from master to slave or from slave to master.
NTF hpnicfDot11ACLoadBalanceTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.4			This trap is sent by AC when load-balance is enabled on AC.
NTF hpnicfDot11ACStaFullTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.5			This notification will be sent when STA is full on AC.
NTF hpnicfDot11ACStatusSwitchTrap	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.6			This notification will be sent when AC switches from standby to active or from standby to active.
NTF hpnicfDot11RunAPNumOverload	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.7			The notification will be sent by AC when run AP number exceeds the threshold.
NTF hpnicfDot11RunAPNumOverloadRecover	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.8			The notification will be sent by AC when run AP number recover normal from overload state.
hpnicfDot11ACMtTrapVarObjects	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1
INT hpnicfDot11ACMtTrapTunlDwnInfo	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.1	INTEGER	accessible-for-notify	Represents the reason for tunnel down. The following values are supported: tunnelTimeout - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure - rekey process is failed, tunnel will be broken. apReset - Administrator reset AP. apCrash - AP reboot for system crash. apDeleted - Delete AP from AC and trigger tunnel down. apCfgChange - The configuration for AP was changed.
INT hpnicfDot11ACMtTrapTunlUpInfo	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.2	INTEGER	accessible-for-notify	Represents the reason for tunnel up. The following values are supported: up(1) - The AP joined AC.
INT hpnicfDot11ACMtTrapBackupSwitchInfo	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.3	INTEGER	accessible-for-notify	Represents status which the AC switches to. The following values are supported: masterToSlave - The AC switches from master to slave. slaveToMaster - The AC switches from slave to master.
OCT hpnicfDot11ACMtTrapTnlAPName	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.4	OCTET STRING	accessible-for-notify	Represents name of the AP which sets up the tunnel with the AC.
IP hpnicfDot11ACMtTrapTnlAPIPAddr	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.5	IpAddress	accessible-for-notify	Represents IP address of the AP which sets up the tunnel with the AC.
INT hpnicfDot11LoadBalanceType	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.6	INTEGER	accessible-for-notify	Represents which kind load balance is enabled by AC. The following values are supported: traffic mode load-balancing: traffic snapshot is considered. session mode load-balancing: the number of users associated with the AP/radio is considered.
I32 hpnicfDot11LoadBalanceThreshold	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.7	Integer32	accessible-for-notify	Represents the value of load balance threshold.
OCT hpnicfDot11ACMtTrapAPIPv6Addr	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.8	OCTET STRING	accessible-for-notify	Represents IPv6 address of the AP which sets up the tunnel with the AC.
I32 hpnicfDot11ACMtTrapTunlDwnCount	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.9	Integer32	accessible-for-notify	Represents how many times that the tunnel between AC and AP has down.
I32 hpnicfDot11ACMaxStaNum	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.10	Integer32	accessible-for-notify	Represents the max number of STA on AC.
OCT hpnicfDot11ACMtTrapTnlAPSysName	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.11	OCTET STRING	accessible-for-notify	Represents system name of the AP which sets up the tunnel with the AC.
TIK hpnicfDot11ACMtFirstTrapTime	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.12	TimeTicks	accessible-for-notify	Represents the first trap time.
INT hpnicfDot11ACStatusSwitchInfo	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.13	INTEGER	accessible-for-notify	Represents status which the AC switches to. The following values are supported: activeToStandby - The AC switches from active to standby. standbyToActive - The AC switches from standby to active.
IP hpnicfDot11SourceACNmsIP	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.14	IpAddress	accessible-for-notify	Represents the NMS IP address of master AC.
MAC hpnicfDot11ACMtTrapAPMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.15	MacAddress	accessible-for-notify	Represents the MAC address of an AP.

RFC description

Vendor-private MIB for HP Networking ICF (Intelligent Connectivity Framework) 802.11 access control and management.

Start monitoring H3C/HPE Networking (ICF-based) wireless controller (AC/CAPWAP tunnel management) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-DOT11-ACMT-MIB