All MIBs › HPN-ICF-DOT11-ACMT-MIB › hpnicfDot11RunAPNumThreshold
hpnicfDot11RunAPNumThreshold
Module: HPN-ICF-DOT11-ACMT-MIB
OID (symbolic): HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11RunAPNumThreshold
OID (numeric): 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: When the percentage of run AP number is larger than this threshold, a notification will be sent.
What is hpnicfDot11RunAPNumThreshold?
Sets the percentage (30-100, default 100) of the maximum permitted AP count above which the AC sends a notification, letting an admin get an early warning before hitting the hard AP capacity limit.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.4 snmpwalk -v2c -c public <target> HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11RunAPNumThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.4.1 snmpget -v2c -c public <target> HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11RunAPNumThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.4.1 i <value>
Start monitoring H3C/HPE Networking (ICF-based) wireless controller (AC/CAPWAP tunnel management) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the HPN-ICF-DOT11-ACMT-MIB::hpnicfDot11RunAPNumThreshold OID value, configure state conditions and alerts, and monitor any H3C/HPE Networking (ICF-based) wireless controller (AC/CAPWAP tunnel management) from a single console.
OID Breakdown
Upper-level ancestors (13 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.11 | hp | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2 | nm | CLJ8500-MIB |
| 1.3.6.1.4.1.11.2.14 | icf | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11 | hpicfObjects | CONFIG-MIB |
| 1.3.6.1.4.1.11.2.14.11.15 | hpnicf | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2 | hpnicfCommon | HPN-ICF-OID-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75 | hpnicfDot11 | HPN-ICF-DOT11-REF-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.11.2.14.11.15.2.75.1 | hpnicfDot11ACMT | HPN-ICF-DOT11-ACMT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1 | hpnicfDot11ACObjectGroup | HPN-ICF-DOT11-ACMT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1 | hpnicfDot11ACObject | HPN-ICF-DOT11-ACMT-MIB |
| 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.4 | hpnicfDot11RunAPNumThreshold | HPN-ICF-DOT11-ACMT-MIB |