HPN-ICF-3GMODEM-MIB

All MIBs › HPN-ICF-3GMODEM-MIB

Last Updated: 2009-04-30

Category: Domain: WAN, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: HP Networking ICF SNMP MIB for 3G cellular modem WAN interface configuration and connection status on HP routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-3GMODEM-MIB?

HPN-ICF-3GMODEM-MIB is an HP Networking ICF proprietary SNMP module for HP routers that support 3G cellular WAN modem cards, exposing inventory and connection information for the wireless card and its User Identification Module (UIM/SIM). It covers hardware inventory data such as model, manufacturer, serial number, and hardware/firmware version of the installed wireless card, along with cellular-specific version data like the PRL (Preferred Roaming List). This is a clear hardware and firmware status monitoring MIB: hpnicfWirelessCardHardwareVersion and hpnicfWirelessCardFirmwareVersion let an administrator confirm the exact hardware/firmware revision installed, while hpnicfWirelessCardSerialNumber supports asset tracking, and the table's association with hpnicfWirelessCardInterfaceIndex ties the modem to its logical WAN interface for correlating with standard interface status. It complements the standard IF-MIB, since interface up/down and traffic state for the cellular link would be read from IF-MIB using the interface index this MIB provides. It is typically deployed on HP branch or remote-site routers using 3G cellular as a primary or backup WAN connection. Engineers can download the HPN-ICF-3GMODEM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-3GMODEM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP branch/remote-site router (3G cellular WAN)

Monitoring Examples

The module exposes hpnicfWirelessCardTable/Entry keyed by hpnicfWirelessCardIndex, holding hpnicfWirelessCardModelName, hpnicfWirelessCardMfgName, hpnicfWirelessCardSerialNumber, hpnicfWirelessCardHardwareVersion, hpnicfWirelessCardFirmwareVersion, hpnicfWirelessCardPRLVersion, and hpnicfWirelessCardInterfaceIndex. An administrator would poll hpnicfWirelessCardFirmwareVersion and hpnicfWirelessCardPRLVersion across a fleet of branch routers to identify units running outdated firmware or roaming lists that may need updating, and use hpnicfWirelessCardInterfaceIndex to cross-reference the modem with IF-MIB interface status to confirm the cellular link itself is up. A card missing from the table or reporting no serial number would indicate the wireless card is not detected or has failed.

What Can Be Monitored

wireless card model/manufacturer/serial number
hardware and firmware version
PRL (roaming list) version
cellular interface index (link to IF-MIB status)

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfWirelessCardModemStatus OID:

Select an HP branch/remote-site router with 3G cellular WAN modem card as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfWirelessCardModemStatus into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The status of modem. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'onLine', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicf3GModem	1.3.6.1.4.1.11.2.14.11.15.2.98			The information about the wireless card and the UIM (User Identification Module).
hpnicf3GModemObjects	1.3.6.1.4.1.11.2.14.11.15.2.98.1
hpnicfWirelessCard	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1
hpnicfWirelessCardTable	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1		not-accessible	This table contains one row per wireless card.
hpnicfWirelessCardEntry	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1		not-accessible	Information about a particular wireless card.
I32 hpnicfWirelessCardIndex	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.1	Integer32	read-only	The index for this entry.
STR hpnicfWirelessCardModelName	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.2	SnmpAdminString	read-only	The model name of this card.
STR hpnicfWirelessCardMfgName	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.3	SnmpAdminString	read-only	The name of the manufacturer of this card.
STR hpnicfWirelessCardDescription	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.4	SnmpAdminString	read-only	The textual description of this card.
STR hpnicfWirelessCardSerialNumber	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.5	SnmpAdminString	read-only	The vendor-specific serial number string for this card.
STR hpnicfWirelessCardCMIIID	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.6	SnmpAdminString	read-only	The card ID of CMII (Ministry of Information Industry of China).
STR hpnicfWirelessCardHardwareVersion	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.7	SnmpAdminString	read-only	The vendor-specific hardware version string for this card.
STR hpnicfWirelessCardFirmwareVersion	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.8	SnmpAdminString	read-only	The vendor-specific firmware version string for this card.
STR hpnicfWirelessCardPRLVersion	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.9	SnmpAdminString	read-only	The preferred roaming list version for this card.
NUM hpnicfWirelessCardInterfaceIndex	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.10	InterfaceIndex	read-only	The interface index in IF-MIB of this card.
INT hpnicfWirelessCardModemStatusEx	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.11	INTEGER	read-only	The status of modem.
INT hpnicfWirelessCardModemMode	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.12	INTEGER	read-only	The mode of the 3G-Modem.
INT hpnicfWirelessCardCurNetConn	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.1.1.13	INTEGER	read-only	The current network connection.
hpnicfSmsGroup	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2
hpnicfSmsScalarObjects	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.1
T/F hpnicfSmsRxNotifSwitch	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.1.1	TruthValue	read-write	The switch of notification when a short message received.
hpnicfSmsOperationTable	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2		not-accessible	This table contains one row per short message.
hpnicfSmsOperationEntry	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2.1		not-accessible	The infomation about the short message.
STR hpnicfSmsDestNumber	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2.1.1	SnmpAdminString	read-write	The destination number of the short message.
HPN hpnicfSmsEncode	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2.1.2	HpnicfSmsEncodeType	read-write	The encoded type of the short message.
OCT hpnicfSmsContent	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2.1.3	OCTET STRING	read-write	Content of the short message.
INT hpnicfSmsSendStatus	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.2.2.1.4	INTEGER	read-write	Status of the short message sent.
hpnicfWirelessCardOnlineTable	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.3		not-accessible	This table contains one row per wireless card.
hpnicfWirelessCardOnlineEntry	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.3.1		not-accessible	Information about online time of a wireless card.
U32 hpnicfWirelessCardOnlineTime	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.3.1.1	Unsigned32	not-accessible	The index for this entry.
INT hpnicfWirelessCardOnlineType	1.3.6.1.4.1.11.2.14.11.15.2.98.1.1.3.1.2	INTEGER	read-only	The online type of this wireless card.
hpnicfUIM	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2
hpnicfUIMInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1		not-accessible	This table contains one row per UIM.
hpnicfUIMInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1		not-accessible	The information about the UIM.
I32 hpnicfUIMIndex	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.1	Integer32	not-accessible	The index for this entry.
HPN hpnicfUIMStatus	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.2	HpnicfUIMStatusType	read-only	The status about this UIM.
STR hpnicfUIMImsi	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.3	SnmpAdminString	read-only	The IMSI (International Mobile Subscriber Identification Number) about this UIM. If this information is unknown to the agent, then this object will be returned a zero-length string.
STR hpnicfUIMPin	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.4	SnmpAdminString	read-only	The PIN about this UIM. If this information is unknown to the agent, then this object will be returned a zero-length string.
U32 hpnicfUIMVoltage	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.5	Unsigned32	read-only	The voltage about this UIM. If this information is unknown to the agent, then this object will be returned 4294967295.
STR hpnicfUIMProvider	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.6	SnmpAdminString	read-only	The provider of mobile network. If this information is unknown to the agent, then this object will be returned a zero-length string.
I32 hpnicfUIMSignal	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.7	Integer32	read-only	The intensity of the signal about this UIM. A value of '99' means no signal.
U32 hpnicfUIMTryPinPukTimes	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.8	Unsigned32	read-only	The number of remaining times for unlocking PIN or PUK. The value is associated the same instance of hpnicfUIMStatus. If this information is unknown to the agent, then this object will be returned 4294967295.
STR hpnicfUIMOldPin	1.3.6.1.4.1.11.2.14.11.15.2.98.1.2.1.1.9	SnmpAdminString	accessible-for-notify	The old PIN for this UIM.
hpnicf3GCdma	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3
hpnicf3GCdma1xRttTable	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1		not-accessible	CDMA 1xRTT table.
hpnicf3GCdma1xRttEntry	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1		not-accessible	An entry of hpnicf3GCdma1xRttTable.
I32 hpnicf3GCdma1xRttCurrentRssi	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1.1	Integer32	read-only	The Received Signal Strength Indicator(RSSI) of CDMA 1xRTT.
I32 hpnicf3GCdma1xRttRssiMediumThreshold	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1.2	Integer32	read-write	The medium signal threshold of CMDA 1xRTT RSSI. The absolute value of hpnicf3GCdma1xRttRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdma1xRttRssiWeakThreshold (\|hpnicf3GCdma1xRttRssiMediumThreshold\| <= \|hpnicf3GCdma1xRttRssiWeakThreshold\|).
I32 hpnicf3GCdma1xRttRssiWeakThreshold	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1.3	Integer32	read-write	The weak signal threshold of CMDA 1xRTT RSSI. The absolute value of hpnicf3GCdma1xRttRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdma1xRttRssiWeakThreshold (\|hpnicf3GCdma1xRttRssiMediumThreshold\| <= \|hpnicf3GCdma1xRttRssiWeakThreshold\|).
INT hpnicf3GCdma1xRttCurServiceStatus	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1.4	INTEGER	read-only	The status of service.
INT hpnicf3GCdma1xRttCurRoamingStatus	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.1.1.5	INTEGER	read-only	The status of roaming.
hpnicf3GCdmaEvDoTable	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2		not-accessible	CDMA EvDo table.
hpnicf3GCdmaEvDoEntry	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1		not-accessible	An entry of hpnicf3GCdmaEvDoTable.
I32 hpnicf3GCdmaEvDoCurrentRssi	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1.1	Integer32	read-only	The Received Signal Strength Indicator(RSSI) of CDMA EvDo.
I32 hpnicf3GCdmaEvDoRssiMediumThreshold	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1.2	Integer32	read-write	The medium signal threshold of CMDA EvDo RSSI. The absolute value of hpnicf3GCdmaEvDoRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdmaEvDoRssiWeakThreshold (\|hpnicf3GCdmaEvDoRssiMediumThreshold\| <= \|hpnicf3GCdmaEvDoRssiWeakThreshold\|).
I32 hpnicf3GCdmaEvDoRssiWeakThreshold	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1.3	Integer32	read-write	The weak signal threshold of CMDA EvDo RSSI. The absolute value of hpnicf3GCdmaEvDoRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdmaEvDoRssiWeakThreshold (\|hpnicf3GCdmaEvDoRssiMediumThreshold\| <= \|hpnicf3GCdmaEvDoRssiWeakThreshold\|).
INT hpnicf3GCdmaEvDoCurServiceStatus	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1.4	INTEGER	read-only	The status of service.
INT hpnicf3GCdmaEvDoCurRoamingStatus	1.3.6.1.4.1.11.2.14.11.15.2.98.1.3.2.1.5	INTEGER	read-only	The status of roaming.
hpnicf3GGsm	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4
hpnicf3GGsmInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1		not-accessible	GSM information table.
hpnicf3GGsmInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1		not-accessible	An entry of hpnicf3GGsmInfoTable.
I32 hpnicf3GGsmCurrentRssi	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.1	Integer32	read-only	The Received Signal Strength Indicator(RSSI) of GSM.
I32 hpnicf3GGsmRssiMediumThreshold	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.2	Integer32	read-write	The medium signal threshold of GSM RSSI. The absolute value of hpnicf3GGsmRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GGsmRssiWeakThreshold (\|hpnicf3GGsmRssiMediumThreshold\| <= \|hpnicf3GGsmRssiWeakThreshold\|).
I32 hpnicf3GGsmRssiWeakThreshold	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.3	Integer32	read-write	The weak signal threshold of GSM RSSI. The absolute value of hpnicf3GGsmRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GGsmRssiWeakThreshold (\|hpnicf3GGsmRssiMediumThreshold\| <= \|hpnicf3GGsmRssiWeakThreshold\|).
STR hpnicf3GGsmImsi	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.4	SnmpAdminString	read-only	The International Mobile Subscriber Identity(IMSI) of GSM.
STR hpnicf3GGsmImei	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.5	SnmpAdminString	read-only	The International Mobile Equipment Identity(IMEI) of GSM.
STR hpnicf3GGsmApn	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.6	SnmpAdminString	read-write	The Access Point Name(APN) of GSM.
INT hpnicf3GGsmPacketSessionStatus	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.7	INTEGER	read-only	The packet session status of GSM.
INT hpnicf3GGsmNetworkSelectionMode	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.8	INTEGER	read-only	The network selection mode of GSM.
STR hpnicf3GGsmMobileNetworkName	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.9	SnmpAdminString	read-only	The mobile network name of GSM.
STR hpnicf3GGsmLac	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.10	SnmpAdminString	read-only	The Location Area Code(LAC) of GSM.
STR hpnicf3GGsmCellId	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.11	SnmpAdminString	read-only	The ID of cell.
INT hpnicf3GGsmSimStatus	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.12	INTEGER	read-only	The status of SIM.
INT hpnicf3GGsmCurServiceStatus	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.13	INTEGER	read-only	The status of service.
INT hpnicf3GGsmCurRoamingStatus	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.14	INTEGER	read-only	The status of roaming.
STR hpnicf3GGsmMcc	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.15	SnmpAdminString	read-only	The Mobile Country Code(MCC) of GSM.
STR hpnicf3GGsmMnc	1.3.6.1.4.1.11.2.14.11.15.2.98.1.4.1.1.16	SnmpAdminString	read-only	The Mobile Network Code of GSM.
hpnicfLte	1.3.6.1.4.1.11.2.14.11.15.2.98.1.5
hpnicfLteInfoTable	1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1		not-accessible	The quality of signal table.
hpnicfLteInfoEntry	1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1		not-accessible	The quality about the signal.
I32 hpnicfLteCurrentRsrp	1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.1	Integer32	read-only	Reference signal receiving power.
I32 hpnicfLteCurrentRsrq	1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.2	Integer32	read-only	Reference signal receiving quality.
I32 hpnicfLteCurrentSinr	1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.3	Integer32	read-only	Signal to interface plus noise ratio.
I32 hpnicfLteTxPower	1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.4	Integer32	read-only	Transmit power, 0x8000 means invalid.
I32 hpnicfLteCurrentRssi	1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.5	Integer32	read-only	The Received Signal Strength Indicator(RSSI) of LTE.
I32 hpnicfLteRssiMediumThreshold	1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.6	Integer32	read-write	The medium signal threshold of LTE RSSI. The absolute value of hpnicfLteRssiMediumThreshold should be less than or equal to the absolute value of hpnicfLteRssiWeakThreshold (\|hpnicfLteRssiMediumThreshold\| <= \|hpnicfLteRssiWeakThreshold\|).
I32 hpnicfLteRssiWeakThreshold	1.3.6.1.4.1.11.2.14.11.15.2.98.1.5.1.1.7	Integer32	read-write	The weak signal threshold of LTE RSSI. The absolute value of hpnicfLteRssiMediumThreshold should be less than or equal to the absolute value of hpnicfLteRssiWeakThreshold (\|hpnicfLteRssiMediumThreshold\| <= \|hpnicfLteRssiWeakThreshold\|).
hpnicf3GModemTrap	1.3.6.1.4.1.11.2.14.11.15.2.98.2
STR hpnicfDevSerialNumber	1.3.6.1.4.1.11.2.14.11.15.2.98.2.1	SnmpAdminString	accessible-for-notify	The serial number of the current device.
STR hpnicfDeviceOUI	1.3.6.1.4.1.11.2.14.11.15.2.98.2.2	SnmpAdminString	accessible-for-notify	The OUI (Organizational Unique Identifier) of the current device.
INT hpnicfAccessMedia	1.3.6.1.4.1.11.2.14.11.15.2.98.2.3	INTEGER	accessible-for-notify	The current access media.
INT hpnicf3GCurrentService	1.3.6.1.4.1.11.2.14.11.15.2.98.2.4	INTEGER	accessible-for-notify	The current service type which binded in the notifications.
I32 hpnicf3GCurrentRssiBind	1.3.6.1.4.1.11.2.14.11.15.2.98.2.5	Integer32	accessible-for-notify	The current RSSI which binded in the notifications.
STR hpnicf3GImsiBind	1.3.6.1.4.1.11.2.14.11.15.2.98.2.6	SnmpAdminString	accessible-for-notify	The IMSI which binded in the notifications.
STR hpnicfSmsSrcNumberBind	1.3.6.1.4.1.11.2.14.11.15.2.98.2.7	SnmpAdminString	accessible-for-notify	The source number which binded in the notifications.
STR hpnicfSmsTimeBind	1.3.6.1.4.1.11.2.14.11.15.2.98.2.8	SnmpAdminString	accessible-for-notify	The sending time which binded in the notifications.
HPN hpnicfSmsEncodeBind	1.3.6.1.4.1.11.2.14.11.15.2.98.2.9	HpnicfSmsEncodeType	accessible-for-notify	The encoded type which binded in the notifications.
OCT hpnicfSmsContentBind	1.3.6.1.4.1.11.2.14.11.15.2.98.2.10	OCTET STRING	accessible-for-notify	The content of short message which binded in the notifications.
hpnicf3GModemTraps	1.3.6.1.4.1.11.2.14.11.15.2.98.3
hpnicf3GModemTrapPrefix	1.3.6.1.4.1.11.2.14.11.15.2.98.3.0
NTF hpnicfWirelessCardInserted	1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.1			A hpnicfWirelessCardInserted notification is generated when a wireless card is inserted.
NTF hpnicfWirelessCardPulledOut	1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.2			A hpnicfWirelessCardPulledOut notification is generated when a wireless card is pulled out.
NTF hpnicfUIMPinInvalid	1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.3			A hpnicfUIMPinInvalid notification is generated when UIM PIN is invalid.
NTF hpnicfUIMPinChanged	1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.4			A hpnicfUIMPinInvalid notification is generated when UIM PIN is changed.
NTF hpnicfAccessMediaChanged	1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.5			A hpnicfAccessMediaChanged notification is generated when access media is changed.
NTF hpnicf3GRssiStrongSignalTrap	1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.6			A hpnicf3GRssiStrongSignalTrap notification is generated when current RSSI exceeds the medium signal threshold.
NTF hpnicf3GRssiMediumSignalTrap	1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.7			A hpnicf3GRssiMediumSignalTrap notification is generated when the current RSSI falls or rises to a value between the medium and weak signal thresholds.
NTF hpnicf3GRssiWeakSignalTrap	1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.8			A hpnicf3GRssiWeakSignalTrap notification is generated when current RSSI falls below the weak signal threshold.
NTF hpnicfSmsTxNotification	1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.9			A hpnicfSmsTxNotification notification is generated when a short message is sent.
NTF hpnicfSmsRxNotification	1.3.6.1.4.1.11.2.14.11.15.2.98.3.0.10			A hpnicfSmsRxNotification notification is generated when a short message is recieved.

RFC description

MIB for wireless card and 3G modem management including UIM, signal strength, and service status.

Start monitoring HP branch/remote-site router with 3G cellular WAN modem card with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-3GMODEM-MIB