HUAWEI-ENTITY-EXTENT-MIB

All MIBs › HUAWEI-ENTITY-EXTENT-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2014-09-17

Category: Hardware and Environment, Optical and WDM, Vendor: Huawei

Description: Extends the standard Entity MIB for Huawei devices, providing CPU utilization, memory usage, entity operational/admin status, optical module parameters, and hardware production information.

IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring HUAWEI-ENTITY-EXTENT-MIB with a free 30-day trial of IPNetwork Monitor.

What Is HUAWEI-ENTITY-EXTENT-MIB?

HUAWEI-ENTITY-EXTENT-MIB extends the standard IETF ENTITY-MIB with Huawei-specific hardware management objects for Huawei routers and switches. It exposes data covering CPU utilization, memory usage, entity administrative and operational status, optical transceiver module parameters, and hardware production/manufacturing information. This MIB is squarely a hardware health-monitoring module: it tracks CPU load, memory consumption, whether physical entities (cards, modules, ports) are administratively enabled and operationally up, plus optical module diagnostics and production/serial data useful for asset tracking. It explicitly depends on and extends the standard ENTITY-MIB, reusing its physical entity indexing while adding Huawei-private columns. It is deployed in Huawei carrier and enterprise network devices as a core building block for NMS dashboards that show chassis health and hardware inventory. Engineers can download the HUAWEI-ENTITY-EXTENT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-ENTITY-EXTENT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei routers
Huawei switches
Huawei network devices with entity-based hardware inventory

Monitoring Examples

An NMS would poll the extended entity table to read CPU and memory utilization per entity index and correlate it with the standard entPhysicalTable to identify which card or module is under load, while also checking optical module parameters for transceivers plugged into that entity. If entity operational status flips to down for a linecard while admin status remains up, that signals an unexpected hardware fault. Sustained elevated CPU or memory readings can indicate a control-plane process consuming excessive resources.

What Can Be Monitored

CPU utilization
memory usage
entity admin/operational status
optical module Tx/Rx parameters
hardware production/serial information

Imported Objects

From ENTITY-MIB

PhysicalClass
PhysicalIndex
entPhysicalIndex	OBJECT-TYPE
entPhysicalName	OBJECT-TYPE
entPhysicalVendorType	OBJECT-TYPE

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From P-BRIDGE-MIB

EnabledStatus

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

AutonomousType
DateAndTime
DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwEntityExtentMIB	1.3.6.1.4.1.2011.5.25.31			The private mib file includes the general extent information of the device.
hwEntityExtObjects	1.3.6.1.4.1.2011.5.25.31.1
hwEntityState	1.3.6.1.4.1.2011.5.25.31.1.1
hwEntityStateTable	1.3.6.1.4.1.2011.5.25.31.1.1.1		not-accessible	This table contains one row per physical entity, There is always at least one row for an 'overall' physical entity. The information in each row may be not include all the object in this table, because of the entity need not some of the information here.
hwEntityStateEntry	1.3.6.1.4.1.2011.5.25.31.1.1.1.1		not-accessible	Information about a particular physical entity. Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS identify and characterize the entry, and objects (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table.
HWA hwEntityAdminStatus	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.1	HwAdminState	read-write	The administrative state for this object, and it is possible to set the state when needed.
HWO hwEntityOperStatus	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.2	HwOperState	read-only	The operational state for this object.
HWS hwEntityStandbyStatus	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.3	HwStandbyStatus	read-only	Some entity in a device can support standby mode, This object is used for monitoring standby status.
HWA hwEntityAlarmLight	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.4	HwAlarmStatus	read-only	The alarm status for this entity. It does not include the severity of alarms raised on child components. On the condition, there are a alarm light on the entity, the object should have the same status with it.
I32 hwEntityCpuUsage	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5	Integer32	read-only	The CPU usage for this entity. Generally, the CPU usage will calculate the overall CPU usage on the entity, and it is not sensible with the number of CPU on the entity.
I32 hwEntityCpuUsageThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.6	Integer32	read-write	The threshold for the CPU usage. When the CPU usage exceed the threshold, a notification will be sent.
I32 hwEntityMemUsage	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7	Integer32	read-only	The memory usage for the entity. This object point out how many percent of memory has been used.
I32 hwEntityMemUsageThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.8	Integer32	read-write	The threshold for the Memory usage, When the memory usage exceed the threshold, a notification will be sent.
I32 hwEntityMemSize	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.9	Integer32	read-only	The size of memory for the entity.
I32 hwEntityUpTime	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.10	Integer32	read-only	The up time for the entity. The mean of up time is when the entity is up, and the value of the object will add one per seconds while the entity running.
I32 hwEntityTemperature	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.11	Integer32	read-only	The temperature for the entity. The value 0X7FFFFFF indicates invalid temperature.
I32 hwEntityTemperatureThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.12	Integer32	read-write	The threshold for the temperature. When the temperature exceeds the threshold, a notification will be sent.
I32 hwEntityVoltage	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.13	Integer32	read-only	The voltage for the entity.
I32 hwEntityVoltageLowThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.14	Integer32	read-write	The low-threshold for the voltage. Generally, we have two threshold for the voltage, one is low-threshold, and the other is high-threshold. the normal status of voltage should be greater than the low-threshold, and lower than the high-threshold. When the voltage low than the low-threshold, a notification will be sent.
I32 hwEntityVoltageHighThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.15	Integer32	read-write	The high-threshold for the voltage. Generally, we have two threshold for the voltage, one is low-threshold, and the other is high-threshold. the normal status of voltage should be greater than the low-threshold, and lower than the high-threshold. When the voltage greater than the high-threshold, a notification will be sent.
I32 hwEntityTemperatureLowThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.16	Integer32	read-write	The low-threshold of temperature. If the device temperature is lower than the threshold, an alarm is raised.
I32 hwEntityOpticalPower	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.17	Integer32	read-only	The optical power of the optical module. Unit: uW
I32 hwEntityCurrent	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.18	Integer32	read-only	The current for the entity.
I32 hwEntityMemSizeMega	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.19	Integer32	read-only	The size of SDRAM(Synchronous Dynamic Random Access Memory) memory for the entity. Unit: M bytes
INT hwEntityPortType	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.20	INTEGER	read-only	Indicates the type of the Ethernet interface: an optical interface or an electrical interface.
INT hwEntityDuplex	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.21	INTEGER	read-only	Indicates the duplex mode of the Ethernet interface. An electrical Ethernet interface can work in half-duplex mode or full-duplex mode. An optical Ethernet can work only in full-duplex mode.
I32 hwEntityOpticalPowerRx	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.22	Integer32	read-only	The optical power(Rx) of the optical module. Unit: uW
I32 hwEntityCpuUsageLowThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.23	Integer32	read-write	The threshold for the CPU usage. When the CPU usage exceed the threshold, a notification will be sent.
I32 hwEntityBoardPower	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.24	Integer32	read-only	The board power for the entity. Unit: W
I32 hwEntityCpuFrequency	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.25	Integer32	read-only	The frequency of the entity. Unit: Hz
INT hwEntitySupportFlexCard	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.26	INTEGER	read-only	It describes whether the whole board supports flexible cards. When the board doesn't support flexible cards, the cards may be dummy ones whose ports will not be seen by the customer.
INT hwEntityBoardClass	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.27	INTEGER	read-only	It describes the board type of the whole board.
I32 hwNseOpmStatus	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.28	Integer32	read-only	OPM status. 0: pass, 1: bypass, 2: invalid
I32 hwEntityCpuMaxUsage	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.29	Integer32	read-only	The Max CPU usage for this entity. Generally, the Max CPU usage will calculate the overall CPU usage on the entity, and it is not sensible with the number of CPU on the entity.
STR hwEntityCPUType	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.30	SnmpAdminString	read-only	CPU type.
STR hwEntityMemoryType	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.31	SnmpAdminString	read-only	Memory type.
I32 hwEntityFlashSize	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.32	Integer32	read-only	Flash size, in KB.
I32 hwEntityIfUpTimes	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.33	Integer32	read-only	Times that the interface goes Up.
I32 hwEntityIfDownTimes	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.34	Integer32	read-only	Times that the interface goes Down.
I32 hwEntityCPUAvgUsage	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.35	Integer32	read-only	Average CPU usage within a specified statistical interval.
I32 hwEntityMemoryAvgUsage	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.36	Integer32	read-only	Average memory usage within a specified statistical interval.
U32 hwEntityMemUsed	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.37	Unsigned32	read-only	The memory information for the entity. This object indicates how many bytes in the memory have been used.
I32 hwEntityTotalFanNum	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.38	Integer32	read-only	The total numbers of the fans in the chassis .
I32 hwEntityNomalFanNum	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.39	Integer32	read-only	The Nomal numbers of the fans in the chassis .
I32 hwEntityTotalPwrNum	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.40	Integer32	read-only	The total numbers of the powers in the chassis .
I32 hwEntityNomalPwrNum	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.41	Integer32	read-only	The nomal numbers of the powers in the chassis .
INT hwEntityFaultLight	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.42	INTEGER	read-write	The repair status for this entity. On the underrepair condition, there is a blue light on the entity.
OCT hwEntityBoardName	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.43	OCTET STRING	read-only	The board name for this entity.
OCT hwEntityBoardDescription	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.44	OCTET STRING	read-only	The board description for this entity.
I32 hwEntity5MinCpuUsage	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.45	Integer32	read-only	Average CPU usage of the last five minutes for this entity.
INT hwEntityStartMode	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.46	INTEGER	read-only	The start mode of board.
OCT hwEntitySplitAttribute	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.47	OCTET STRING	read-only	The attribute for the split port.
I32 hwEntityFaultLightKeepTime	1.3.6.1.4.1.2011.5.25.31.1.1.1.1.48	Integer32	read-write	Fault light twinkle keep time,the default is 45 seconds.
hwRUModuleInfoTable	1.3.6.1.4.1.2011.5.25.31.1.1.2		not-accessible	This table contains one row per replaceable unit physical entity. The row with the field 'entPhysicalIsFRU' sets to 'true' in table 'entPhysicalTable' will be mapped to one row in this table.
hwRUModuleInfoEntry	1.3.6.1.4.1.2011.5.25.31.1.1.2.1		not-accessible	Information about a replaceable unit physical entity. Each entry provides objects of a replaceable unit to help an NMS identify and characterize the entry in this table.
STR hwEntityBomId	1.3.6.1.4.1.2011.5.25.31.1.1.2.1.1	SnmpAdminString	read-only	The identity of the Bill of Material about this replaceable unit which coded by vendor. This node is mapping to 'ITEM' in the information file.
STR hwEntityBomEnDesc	1.3.6.1.4.1.2011.5.25.31.1.1.2.1.2	SnmpAdminString	read-only	The English description of the Bill of Material about this replaceable unit.
STR hwEntityBomLocalDesc	1.3.6.1.4.1.2011.5.25.31.1.1.2.1.3	SnmpAdminString	read-only	The local description of the Bill of Material about this replaceable unit.
DAT hwEntityManufacturedDate	1.3.6.1.4.1.2011.5.25.31.1.1.2.1.4	DateAndTime	read-only	The date when this physical entity is Manufactured.
I32 hwEntityManufactureCode	1.3.6.1.4.1.2011.5.25.31.1.1.2.1.5	Integer32	read-only	The code of the place where this physical entity is Manufactured.
STR hwEntityCLEICode	1.3.6.1.4.1.2011.5.25.31.1.1.2.1.6	SnmpAdminString	read-only	The string code of CLEI which was granted by America.
STR hwEntityUpdateLog	1.3.6.1.4.1.2011.5.25.31.1.1.2.1.7	SnmpAdminString	read-only	The maintenance log of this replaceable unit.
STR hwEntityArchivesInfoVersion	1.3.6.1.4.1.2011.5.25.31.1.1.2.1.8	SnmpAdminString	read-only	The Version of Archives Information.
STR hwEntityOpenBomId	1.3.6.1.4.1.2011.5.25.31.1.1.2.1.9	SnmpAdminString	read-only	The BomId for distribution. It is different from hwEntityBomId.
STR hwEntityIssueNum	1.3.6.1.4.1.2011.5.25.31.1.1.2.1.10	SnmpAdminString	read-only	The issue number for hardware change.
STR hwEntityBoardType	1.3.6.1.4.1.2011.5.25.31.1.1.2.1.11	SnmpAdminString	read-only	The type code for entity.
hwOpticalModuleInfoTable	1.3.6.1.4.1.2011.5.25.31.1.1.3		not-accessible	Table of optical module properties.
hwOpticalModuleInfoEntry	1.3.6.1.4.1.2011.5.25.31.1.1.3.1		not-accessible	An entry in the table of optical module properties for each optical module.
INT hwEntityOpticalMode	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.1	INTEGER	read-only	The mode of the optical module.
I32 hwEntityOpticalWaveLength	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.2	Integer32	read-only	The wave length of the optical module. Unit: nm.
I32 hwEntityOpticalTransDistance	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.3	Integer32	read-only	The max transmission distance of the optical module. Unit: m.
STR hwEntityOpticalVendorSn	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.4	SnmpAdminString	read-only	The vendor serial number (vendor SN) of the optical module. Length: 16 bytes.
I32 hwEntityOpticalTemperature	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.5	Integer32	read-only	The current temperature of the optical module. Unit: C
I32 hwEntityOpticalVoltage	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.6	Integer32	read-only	The current voltage of the optical module. Unit: mV.
I32 hwEntityOpticalBiasCurrent	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.7	Integer32	read-only	The bias current of the optical module. Unit: mA.
I32 hwEntityOpticalRxPower	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.8	Integer32	read-only	The receive power of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
I32 hwEntityOpticalTxPower	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.9	Integer32	read-only	The transmit power of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
INT hwEntityOpticalType	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.10	INTEGER	read-only	The type of the optical module.
I32 hwEntityOpticalTransBW	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.11	Integer32	read-only	The Transceiver max BW of the optical module.Unit:M
INT hwEntityOpticalFiberType	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.12	INTEGER	read-only	The Fiber type of the optical module.
I32 hwEntityOpticalRxLowThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.13	Integer32	read-only	The receive power low threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
I32 hwEntityOpticalRxHighThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.14	Integer32	read-only	The receive power high threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
I32 hwEntityOpticalTxLowThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.15	Integer32	read-only	The transmit power low threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
I32 hwEntityOpticalTxHighThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.16	Integer32	read-only	The transmit power high threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
INT hwEntityOpticalPlug	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.17	INTEGER	read-only	The optical module is plug-supported or not.
INT hwEntityOpticalDirectionType	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.18	INTEGER	read-only	The direction type of the optical module.
STR hwEntityOpticalUserEeprom	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.19	DisplayString	read-only	The user writable EEPROM of the optical module.
I32 hwEntityOpticalRxLowWarnThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.20	Integer32	read-only	The receive power low warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
I32 hwEntityOpticalRxHighWarnThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.21	Integer32	read-only	The receive power high warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
I32 hwEntityOpticalTxLowWarnThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.22	Integer32	read-only	The transmit power low warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
I32 hwEntityOpticalTxHighWarnThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.23	Integer32	read-only	The transmit power high warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
STR hwEntityOpticalVenderName	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.24	DisplayString	read-only	The Vender Name of the optical module.
STR hwEntityOpticalVenderPn	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.25	DisplayString	read-only	The Vender PN of the optical module.
INT hwEntityOpticalAuthenticationStatus	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.26	INTEGER	read-only	The authentication status of optical module.
INT hwEntityOpticalTunableType	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.27	INTEGER	read-only	The tunable type of the optical module.
I32 hwEntityOpticalWaveLengthDecimal	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.28	Integer32	read-only	The Decimal wavelength of the optical module. Unit: nm. The value is expanded 1000 times,so the real value should be reduced 1000 times.
I32 hwEntityOpticalTunableModuleChannel	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.29	Integer32	read-only	The current channel of tunable optical module.
INT hwEntityOpticalWaveBand	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.30	INTEGER	read-only	The wave band of the optical module.
STR hwEntityOpticalLaneBiasCurrent	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.31	SnmpAdminString	read-only	The bias current of the QSFP or CFP optical module. Unit: mA.(e.g., 37.88,39.15,39.84,37.82)
STR hwEntityOpticalLaneRxPower	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.32	SnmpAdminString	read-only	The receive power of the QSFP or CFP optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times (e.g., 114,32,-90,-228)
STR hwEntityOpticalLaneTxPower	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.33	SnmpAdminString	read-only	The transmit power of the QSFP or CFP optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times (e.g., 94,-39,33,-58)
STR hwEntityOpticalVendorOUI	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.34	DisplayString	read-only	Vendor ID of the optical module assigned by IEEE.
STR hwEntityOpticalVendorRev	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.35	DisplayString	read-only	The Vender Version of the optical module.
STR hwEntityOpticalGponSN	1.3.6.1.4.1.2011.5.25.31.1.1.3.1.36	DisplayString	read-only	The SN of the optical module provided by the vendor.
hwMonitorInputTable	1.3.6.1.4.1.2011.5.25.31.1.1.4		not-accessible	This table contains one row per replaceable unit physical entity. This table is used to set the status of monitor port.
hwMonitorInputEntry	1.3.6.1.4.1.2011.5.25.31.1.1.4.1		not-accessible	This is a replaceable unit physical entity.
I32 hwMonitorInputIndex	1.3.6.1.4.1.2011.5.25.31.1.1.4.1.1	Integer32	not-accessible	Monitor port index. This is a number of input line,ranging from 1 to 4.
STR hwMonitorInputName	1.3.6.1.4.1.2011.5.25.31.1.1.4.1.2	DisplayString	read-create	Monitor line name.
HWL hwMonitorInputState	1.3.6.1.4.1.2011.5.25.31.1.1.4.1.3	HWLevelState	read-create	Monitor line status. The value is high or low.
ENA hwMonitorInputStateEnable	1.3.6.1.4.1.2011.5.25.31.1.1.4.1.4	EnabledStatus	read-create	Enable monitor line.
ROW hwMonitorInputRowStatus	1.3.6.1.4.1.2011.5.25.31.1.1.4.1.5	RowStatus	read-create	Status of monitor input row.
hwMonitorOutputTable	1.3.6.1.4.1.2011.5.25.31.1.1.5		not-accessible	This table contains one row per replaceable unit physical entity. This table is used to create a output view.
hwMonitorOutputEntry	1.3.6.1.4.1.2011.5.25.31.1.1.5.1		not-accessible	This is a replaceable unit physical entity.
I32 hwMonitorOutputIndex	1.3.6.1.4.1.2011.5.25.31.1.1.5.1.1	Integer32	not-accessible	Monitor output view index. Through this index ,you can turn into the output view.
I32 hwMonitorOutputRuleIndex	1.3.6.1.4.1.2011.5.25.31.1.1.5.1.2	Integer32	not-accessible	Monitor output rule index. This is used to set the rules about all of the input line.
STR hwMonitorOutputMask	1.3.6.1.4.1.2011.5.25.31.1.1.5.1.3	DisplayString	read-create	Monitor output mask . This is used to matching the level of monitor input line.
STR hwMonitorOutputKey	1.3.6.1.4.1.2011.5.25.31.1.1.5.1.4	DisplayString	read-create	Normal level value of this output line.
ROW hwMonitorOutputRowStatus	1.3.6.1.4.1.2011.5.25.31.1.1.5.1.5	RowStatus	read-create	Status of monitor input row
hwEntPowerUsedInfoTable	1.3.6.1.4.1.2011.5.25.31.1.1.6		not-accessible	A table of information that displays the power use of entity .
hwEntPowerUsedInfoEntry	1.3.6.1.4.1.2011.5.25.31.1.1.6.1		not-accessible	Entry of the table of information that displays the power use of entity.
OCT hwEntPowerUsedInfoBoardName	1.3.6.1.4.1.2011.5.25.31.1.1.6.1.1	OCTET STRING	read-only	Board name.
OCT hwEntPowerUsedInfoBoardType	1.3.6.1.4.1.2011.5.25.31.1.1.6.1.2	OCTET STRING	read-only	Board type.
I32 hwEntPowerUsedInfoBoardSlot	1.3.6.1.4.1.2011.5.25.31.1.1.6.1.3	Integer32	read-only	Board's slot number.
I32 hwEntPowerUsedInfoPower	1.3.6.1.4.1.2011.5.25.31.1.1.6.1.4	Integer32	read-only	Used power of board.
hwVirtualCableTestTable	1.3.6.1.4.1.2011.5.25.31.1.1.7		not-accessible	This table contains one row per replaceable unit physical entity. This table is used to display VCT result.
hwVirtualCableTestEntry	1.3.6.1.4.1.2011.5.25.31.1.1.7.1		not-accessible	This is a replaceable unit physical entity.
NUM hwVirtualCableTestIfIndex	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.1	InterfaceIndex	not-accessible	IfIndex of port that you want to test cable.
INT hwVirtualCableTestPairStatus	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.2	INTEGER	read-only	Pair status. This indicate the status of cable.
I32 hwVirtualCableTestPairLength	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.3	Integer32	read-only	Pair Length. This indicate the length of cable.
INT hwVirtualCableTestOperation	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.4	INTEGER	read-write	VirtualCableTestOperation. This Operation of VirtualCableTest.
I32 hwVirtualCableTestLastTime	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.5	Integer32	read-only	The last test time for the entity. The mean of last time is when the entity is tested, and the value of the object will add one per seconds until now.
INT hwVirtualCableTestPairAStatus	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.6	INTEGER	read-only	Pair A status. This indicate the status of cable.
INT hwVirtualCableTestPairBStatus	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.7	INTEGER	read-only	Pair B status. This indicate the status of cable.
INT hwVirtualCableTestPairCStatus	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.8	INTEGER	read-only	Pair C status. This indicate the status of cable.
INT hwVirtualCableTestPairDStatus	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.9	INTEGER	read-only	Pair D status. This indicate the status of cable.
I32 hwVirtualCableTestPairALength	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.10	Integer32	read-only	Pair A Length. This indicate the length of cable.
I32 hwVirtualCableTestPairBLength	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.11	Integer32	read-only	Pair B Length. This indicate the length of cable.
I32 hwVirtualCableTestPairCLength	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.12	Integer32	read-only	Pair C Length. This indicate the length of cable.
I32 hwVirtualCableTestPairDLength	1.3.6.1.4.1.2011.5.25.31.1.1.7.1.13	Integer32	read-only	Pair D Length. This indicate the length of cable.
hwTemperatureThresholdTable	1.3.6.1.4.1.2011.5.25.31.1.1.8		not-accessible	This table lists the alarm thresholds of temperature sensors. You can read information about all the temperature sensors of the device. You can set the alarm threshold of a specified temperature sensor.
hwTemperatureThresholdEntry	1.3.6.1.4.1.2011.5.25.31.1.1.8.1		not-accessible	Defines an entry in the hwTemperatureThresholdTable.
I32 hwEntityTempSlotId	1.3.6.1.4.1.2011.5.25.31.1.1.8.1.1	Integer32	read-only	This object indicates the slot ID of a temperature sensor.
I32 hwEntityTempI2CId	1.3.6.1.4.1.2011.5.25.31.1.1.8.1.2	Integer32	read-only	This object indicates the I2CID of a temperature sensor.
I32 hwEntityTempAddr	1.3.6.1.4.1.2011.5.25.31.1.1.8.1.3	Integer32	read-only	This object indicates the address of a temperature sensor.
I32 hwEntityTempChannel	1.3.6.1.4.1.2011.5.25.31.1.1.8.1.4	Integer32	read-only	This object indicates the channel of a temperature sensor.
INT hwEntityTempStatus	1.3.6.1.4.1.2011.5.25.31.1.1.8.1.5	INTEGER	read-only	This object indicates the current status of a temperature sensor.
I32 hwEntityTempValue	1.3.6.1.4.1.2011.5.25.31.1.1.8.1.6	Integer32	read-only	This object indicates the current value in Celsius of a temperature sensor.
I32 hwEntityTempMinorAlmThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.8.1.7	Integer32	read-write	This object indicates the threshold for a minor alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius.
I32 hwEntityTempMajorAlmThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.8.1.8	Integer32	read-write	This object indicates the threshold for a major alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius.
I32 hwEntityTempFatalAlmThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.8.1.9	Integer32	read-write	This object indicates the threshold for a fatal alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius.
hwVoltageInfoTable	1.3.6.1.4.1.2011.5.25.31.1.1.9		not-accessible	This table lists information about voltage sensors. You can read information about all the voltage sensors of the device. You can set the alarm threshold of a specified voltage sensor.
hwVoltageInfoEntry	1.3.6.1.4.1.2011.5.25.31.1.1.9.1		not-accessible	Defines an entry in the hwVoltageInfoTable.
I32 hwEntityVolSlot	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.1	Integer32	read-only	This object indicates the slot ID of a voltage sensor.
I32 hwEntityVolI2CId	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.2	Integer32	read-only	This object indicates the I2CID of a voltage sensor.
I32 hwEntityVolAddr	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.3	Integer32	read-only	This object indicates the address of a voltage sensor.
I32 hwEntityVolChannel	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.4	Integer32	read-only	This object indicates the channel of a voltage sensor.
INT hwEntityVolStatus	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.5	INTEGER	read-only	This object indicates the current status of a voltage sensor.
I32 hwEntityVolRequired	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.6	Integer32	read-only	This object indicates the nominal value in millivolt of a voltage sensor.
I32 hwEntityVolCurValue	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.7	Integer32	read-only	This object indicates the current value in millivolt of a voltage sensor.
I32 hwEntityVolRatio	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.8	Integer32	read-only	This object indicates the voltage ratio of a voltage sensor.
I32 hwEntityVolLowAlmMajor	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.9	Integer32	read-write	This object indicates the threshold for a major alarm of low voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.
I32 hwEntityVolLowAlmFatal	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.10	Integer32	read-write	This object indicates the threshold for a fatal alarm of low voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.
I32 hwEntityVolHighAlmMajor	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.11	Integer32	read-write	This object indicates the threshold for a major alarm of high voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.
I32 hwEntityVolHighAlmFatal	1.3.6.1.4.1.2011.5.25.31.1.1.9.1.12	Integer32	read-write	This object indicates the threshold for a fatal alarm of high voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.
hwFanStatusTable	1.3.6.1.4.1.2011.5.25.31.1.1.10		not-accessible	This table lists the status of fans. You can read the status of the fans on the device.
hwFanStatusEntry	1.3.6.1.4.1.2011.5.25.31.1.1.10.1		not-accessible	Defines an entry in the hwFanStatusTable.
I32 hwEntityFanSlot	1.3.6.1.4.1.2011.5.25.31.1.1.10.1.1	Integer32	read-only	This object indicates the slot ID of a fan.
I32 hwEntityFanSn	1.3.6.1.4.1.2011.5.25.31.1.1.10.1.2	Integer32	read-only	This object indicates the serial number of the fan in a certain slot.
INT hwEntityFanReg	1.3.6.1.4.1.2011.5.25.31.1.1.10.1.3	INTEGER	read-only	This object indicates whether the fan is registered.
INT hwEntityFanSpdAdjMode	1.3.6.1.4.1.2011.5.25.31.1.1.10.1.4	INTEGER	read-only	This object indicates the speed adjustment mode of the fan.
I32 hwEntityFanSpeed	1.3.6.1.4.1.2011.5.25.31.1.1.10.1.5	Integer32	read-only	This object indicates the rotation speed (in percentage of the full speed) of the fan.
INT hwEntityFanPresent	1.3.6.1.4.1.2011.5.25.31.1.1.10.1.6	INTEGER	read-only	This object indicates the present information of the fan.
INT hwEntityFanState	1.3.6.1.4.1.2011.5.25.31.1.1.10.1.7	INTEGER	read-only	This object indicates the state of the fan.
OCT hwEntityFanDesc	1.3.6.1.4.1.2011.5.25.31.1.1.10.1.8	OCTET STRING	read-only	This object indicates the description of the fan.
hwEntityGlobalPara	1.3.6.1.4.1.2011.5.25.31.1.1.11
INT hwEntityServiceType	1.3.6.1.4.1.2011.5.25.31.1.1.11.1	INTEGER	read-only	It describes the service-type of spu board .
I32 hwDeviceServiceType	1.3.6.1.4.1.2011.5.25.31.1.1.11.2	Integer32	read-only	It describes the service-type of the device. bit0 is WLAN, bit1 is SSLVPN, bit2 is ipsec,other bits temporarily without easy back extension. Each bit 0 is disable, 1 is enable.
I32 hwEntityManufacturerOUI	1.3.6.1.4.1.2011.5.25.31.1.1.11.3	Integer32	read-only	It describes the Manufacturer of the device.
hwPortBip8StatisticsTable	1.3.6.1.4.1.2011.5.25.31.1.1.12		not-accessible	Indicates the BIP8 statistics. This table lists the various BIP8 statistics.
hwPortBip8StatisticsEntry	1.3.6.1.4.1.2011.5.25.31.1.1.12.1		not-accessible	Indicates the BIP8 statistics. This table lists the various BIP8 statistics.
C64 hwPhysicalPortBip8StatisticsEB	1.3.6.1.4.1.2011.5.25.31.1.1.12.1.1	Counter64	read-only	BIP8 Statistics: EB(Errored Block).
C64 hwPhysicalPortBip8StatisticsES	1.3.6.1.4.1.2011.5.25.31.1.1.12.1.2	Counter64	read-only	BIP8 Statistics: ES(Errored Second).
C64 hwPhysicalPortBip8StatisticsSES	1.3.6.1.4.1.2011.5.25.31.1.1.12.1.3	Counter64	read-only	BIP8 Statistics: SES(Severely Errored Second).
C64 hwPhysicalPortBip8StatisticsUAS	1.3.6.1.4.1.2011.5.25.31.1.1.12.1.4	Counter64	read-only	BIP8 Statistics: UAS(Unavailable Errored Second).
C64 hwPhysicalPortBip8StatisticsBBE	1.3.6.1.4.1.2011.5.25.31.1.1.12.1.5	Counter64	read-only	BIP8 Statistics: BBE(Background Block Error).
U32 hwPhysicalPortSpeed	1.3.6.1.4.1.2011.5.25.31.1.1.12.1.6	Unsigned32	read-only	An estimate of the interface's current bandwidth in 1000000 bits per second.
hwStorageEntTable	1.3.6.1.4.1.2011.5.25.31.1.1.13		not-accessible	Indicates the Storage statistics
hwStorageEntEntry	1.3.6.1.4.1.2011.5.25.31.1.1.13.1		not-accessible	Indicates the Storage statistics. This table lists the Entity Storage statistics.
I32 hwStorageEntIndex	1.3.6.1.4.1.2011.5.25.31.1.1.13.1.1	Integer32	read-only	The Index of Storage statistics.
I32 hwStorageEntType	1.3.6.1.4.1.2011.5.25.31.1.1.13.1.2	Integer32	read-only	The Type of Storage.
I32 hwStorageEntSpace	1.3.6.1.4.1.2011.5.25.31.1.1.13.1.3	Integer32	read-only	The Size of Storage.
I32 hwStorageEntSpaceFree	1.3.6.1.4.1.2011.5.25.31.1.1.13.1.4	Integer32	read-only	The Free Size of Storage.
STR hwStorageEntName	1.3.6.1.4.1.2011.5.25.31.1.1.13.1.5	SnmpAdminString	read-only	The Name of Storage.
STR hwStorageEntDescr	1.3.6.1.4.1.2011.5.25.31.1.1.13.1.6	SnmpAdminString	read-only	The Description of Storage.
hwSystemPowerTable	1.3.6.1.4.1.2011.5.25.31.1.1.14		not-accessible	System power infomation table.
hwSystemPowerEntry	1.3.6.1.4.1.2011.5.25.31.1.1.14.1		not-accessible	System power infomation entry.
I32 hwSystemPowerDeviceID	1.3.6.1.4.1.2011.5.25.31.1.1.14.1.1	Integer32	read-only	System power infomation device ID.
I32 hwSystemPowerTotalPower	1.3.6.1.4.1.2011.5.25.31.1.1.14.1.2	Integer32	read-only	System power infomation total power.
I32 hwSystemPowerUsedPower	1.3.6.1.4.1.2011.5.25.31.1.1.14.1.3	Integer32	read-only	System power infomation used power.
I32 hwSystemPowerRemainPower	1.3.6.1.4.1.2011.5.25.31.1.1.14.1.4	Integer32	read-only	System power infomation remain power.
I32 hwSystemPowerReservedPower	1.3.6.1.4.1.2011.5.25.31.1.1.14.1.5	Integer32	read-only	System power infomation reserved power.
hwBatteryInfoTable	1.3.6.1.4.1.2011.5.25.31.1.1.15		not-accessible	Description.Battery information table
hwBatteryInfoEntry	1.3.6.1.4.1.2011.5.25.31.1.1.15.1		not-accessible	Description.Battery information entry
INT hwBatteryState	1.3.6.1.4.1.2011.5.25.31.1.1.15.1.1	INTEGER	read-only	Description.The state of lithium battery.
I32 hwBatteryTemperatureLow	1.3.6.1.4.1.2011.5.25.31.1.1.15.1.2	Integer32	read-only	Description.The lowest temperature of lithium battery.
I32 hwBatteryTemperatureHigh	1.3.6.1.4.1.2011.5.25.31.1.1.15.1.3	Integer32	read-only	Description.The highest temperature of lithium battery.
I32 hwBatteryRemainPercent	1.3.6.1.4.1.2011.5.25.31.1.1.15.1.4	Integer32	read-only	Description. The remained electricity quantity percent of lithium battery,unit in minute.
I32 hwBatteryRemainTime	1.3.6.1.4.1.2011.5.25.31.1.1.15.1.5	Integer32	read-only	Description. The remained time of lithium battery.
I32 hwBatteryElecTimes	1.3.6.1.4.1.2011.5.25.31.1.1.15.1.6	Integer32	read-only	Description.The charge and discharge times of lithium battery.
I32 hwBatteryLifeThreshold	1.3.6.1.4.1.2011.5.25.31.1.1.15.1.7	Integer32	read-write	Description.The warning threshold of lithium battery's lifetime.(unit in minute,the default value is 20)
hwGPSLocationInfo	1.3.6.1.4.1.2011.5.25.31.1.1.16
OCT hwGPSLongitude	1.3.6.1.4.1.2011.5.25.31.1.1.16.1	OCTET STRING	read-only	Description.The longitude of the device location.
OCT hwGPSLatitude	1.3.6.1.4.1.2011.5.25.31.1.1.16.2	OCTET STRING	read-only	Description.The latidude of the device location.
OCT hwGPSVelocity	1.3.6.1.4.1.2011.5.25.31.1.1.16.3	OCTET STRING	read-only	Description.The velocity of the device.
hwAdmPortTable	1.3.6.1.4.1.2011.5.25.31.1.1.17		not-accessible	The table of ADM(Add/Drop Multiplexer) port properties.
hwAdmPortEntry	1.3.6.1.4.1.2011.5.25.31.1.1.17.1		not-accessible	The entry of ADM(Add/Drop Multiplexer) port properties table.
OCT hwAdmPortDescription	1.3.6.1.4.1.2011.5.25.31.1.1.17.1.1	OCTET STRING	read-write	The description of ADM(Add/Drop Multiplexer) port.
hwPwrStatusTable	1.3.6.1.4.1.2011.5.25.31.1.1.18		not-accessible	This table lists the status of powers. You can read the status of the powers on the device.
hwPwrStatusEntry	1.3.6.1.4.1.2011.5.25.31.1.1.18.1		not-accessible	Defines an entry in the hwPwrStatusTable.
I32 hwEntityPwrSlot	1.3.6.1.4.1.2011.5.25.31.1.1.18.1.1	Integer32	read-only	This object indicates the slot ID of a power.
I32 hwEntityPwrSn	1.3.6.1.4.1.2011.5.25.31.1.1.18.1.2	Integer32	read-only	This object indicates the serial number of the power in a certain slot.
INT hwEntityPwrReg	1.3.6.1.4.1.2011.5.25.31.1.1.18.1.3	INTEGER	read-only	This object indicates whether the power is registered.
INT hwEntityPwrMode	1.3.6.1.4.1.2011.5.25.31.1.1.18.1.4	INTEGER	read-only	This object indicates the mode of the power.
INT hwEntityPwrPresent	1.3.6.1.4.1.2011.5.25.31.1.1.18.1.5	INTEGER	read-only	This object indicates the present information of the power.
INT hwEntityPwrState	1.3.6.1.4.1.2011.5.25.31.1.1.18.1.6	INTEGER	read-only	This object indicates the state of the power.
I32 hwEntityPwrCurrent	1.3.6.1.4.1.2011.5.25.31.1.1.18.1.7	Integer32	read-only	This object indicates the current of the power. Unit: mA
I32 hwEntityPwrVoltage	1.3.6.1.4.1.2011.5.25.31.1.1.18.1.8	Integer32	read-only	This object indicates the voltage of the power. Unit: mV
OCT hwEntityPwrDesc	1.3.6.1.4.1.2011.5.25.31.1.1.18.1.9	OCTET STRING	read-only	This object indicates the description of the power.
hwEntityPhysicalSpecTable	1.3.6.1.4.1.2011.5.25.31.1.2
I32 hwEntityPhysicalSpecRack	1.3.6.1.4.1.2011.5.25.31.1.2.1	Integer32	read-only	The rack coefficient used for calculating the index of the physical entity.
I32 hwEntityPhysicalSpecFrame	1.3.6.1.4.1.2011.5.25.31.1.2.2	Integer32	read-only	The frame coefficient used for calculating the index of the physical entity.
I32 hwEntityPhysicalSpecSlot	1.3.6.1.4.1.2011.5.25.31.1.2.3	Integer32	read-only	The slot coefficient used for calculating the index of the physical entity.
I32 hwEntityPhysicalSpecBoard	1.3.6.1.4.1.2011.5.25.31.1.2.4	Integer32	read-only	The board coefficient used for calculating the index of the physical entity.
I32 hwEntityPhysicalSpecSubSlot	1.3.6.1.4.1.2011.5.25.31.1.2.5	Integer32	read-only	The sub slot coefficient used for calculating the index of the physical entity.
I32 hwEntityPhysicalSpecSubBoard	1.3.6.1.4.1.2011.5.25.31.1.2.6	Integer32	read-only	The sub board coefficient used for calculating the index of the physical entity.
I32 hwEntityPhysicalSpecPort	1.3.6.1.4.1.2011.5.25.31.1.2.7	Integer32	read-only	The port coefficient used for calculating the index of the physical entity.
I32 hwEntityPhysicalSpecEmu	1.3.6.1.4.1.2011.5.25.31.1.2.8	Integer32	read-only	The EMU(Environment monitoring unit) coefficient used for calculating the index of the physical entity.
I32 hwEntityPhysicalSpecPowerframe	1.3.6.1.4.1.2011.5.25.31.1.2.9	Integer32	read-only	The power frame coefficient used for calculating the index of the physical entity.
I32 hwEntityPhysicalSpecPowermodule	1.3.6.1.4.1.2011.5.25.31.1.2.10	Integer32	read-only	The power module coefficient used for calculating the index of the physical entity.
I32 hwEntityPhysicalSpecBattery	1.3.6.1.4.1.2011.5.25.31.1.2.11	Integer32	read-only	The battery coefficient used for calculating the index of the physical entity.
hwEntityExtTraps	1.3.6.1.4.1.2011.5.25.31.2
hwEntityExtTrapsPrefix	1.3.6.1.4.1.2011.5.25.31.2.0
NTF hwEntityExtTemperatureThresholdNotification	1.3.6.1.4.1.2011.5.25.31.2.0.1			The hwEntityEnvTemperatureThresholdNotification indicates the temperature have been exceed the threshold. In the condition, user should check the hardware and the environment of the entity, sometimes it happened because of the failture of air-condition. Anyway, the threshold should lower than the value that most service work fine.
NTF hwEntityExtVoltageLowThresholdNotification	1.3.6.1.4.1.2011.5.25.31.2.0.2			The hwEntityExtVoltageLowThresholdNotification indicates the voltage is lower than the threshold. This may decrease the usability of the entity. If the voltage is lower too much than the hardware needed, the entity will stop working. Anyway, the threshold should higher than the value that most service work fine.
NTF hwEntityExtVoltageHighThresholdNotification	1.3.6.1.4.1.2011.5.25.31.2.0.3			The hwEntityExtVoltageHighThresholdNotification indicates the voltage is higher than the threshold. This may decrease the usability of the entity. If the voltage is higher too much than the hardware needed, the entity may be destroyed by the high voltage. Anyway, the threshold should lower than the value that most service work fine.
NTF hwEntityExtCpuUsageThresholdNotfication	1.3.6.1.4.1.2011.5.25.31.2.0.4			The hwEntityExtCpuUsageThresholdNotfication indicates the entity is overload, and the service running in the entity will not get the performance it should because of CPU's performance. Anyway, the threshold should lower than the value that most service work fine.
NTF hwEntityExtMemUsageThresholdNotification	1.3.6.1.4.1.2011.5.25.31.2.0.5			The hwEntityExtMemUsageThresholdNotification indicates the entity is overload, and the service running in the entity will not get the performance it should because of lower memory. Anyway, the threshold should lower than the value that most service work fine.
NTF hwEntityExtOperEnabled	1.3.6.1.4.1.2011.5.25.31.2.0.6			The entity is operational. The entity this notification refers can be identified by extracting the entPhysicalIndex from one of the variable bindings.
NTF hwEntityExtOperDisabled	1.3.6.1.4.1.2011.5.25.31.2.0.7			The entity is operational. The entity this notification refers can be identified by extracting the entPhysicalIndex from one of the variable bindings.
NTF hwEntityExtMonitorBoardAbnormalNotification	1.3.6.1.4.1.2011.5.25.31.2.0.8			The monitor board turns normal to abnormal.
NTF hwEntityExtMonitorBoardNormalNotification	1.3.6.1.4.1.2011.5.25.31.2.0.9			The monitor board turns abnormal to normal.
NTF hwEntityExtMonitorPortAbnormalNotification	1.3.6.1.4.1.2011.5.25.31.2.0.10			The monitor port turns normal to abnormal.
NTF hwEntityExtMonitorPortNormalNotification	1.3.6.1.4.1.2011.5.25.31.2.0.11			The monitor port turns abnormal to normal.
NTF hwEntityExtCpuUsageLowThresholdNotfication	1.3.6.1.4.1.2011.5.25.31.2.0.12			The hwEntityExtCpuUsageThresholdNotfication indicates the entity is overload, and the service running in the entity will not get the performance it should because of CPU's performance. Anyway, the threshold should lower than the value that most service work fine.
hwEntityExtTrapObject	1.3.6.1.4.1.2011.5.25.31.2.1
OCT hwEntityExtTrapBaseSoftwareVersion	1.3.6.1.4.1.2011.5.25.31.2.1.1	OCTET STRING	accessible-for-notify	System bassic software version.
OCT hwEntityExtTrapBoardSoftwareVersion	1.3.6.1.4.1.2011.5.25.31.2.1.2	OCTET STRING	accessible-for-notify	Board software version compare to basic software version.
OCT hwPhysicalName	1.3.6.1.4.1.2011.5.25.31.2.1.3	OCTET STRING	read-only	The textual name of the physical entity. The value of this object should be the name of the component as assigned by the local device and should be suitable for use in commands entered at the device's `console'. This might be a text name, such as `console' or a simple component number (e.g., port or module number), such as `1', depending on the physical component naming syntax of the device. If there is no local name, or this object is otherwise not applicable, then this object contains a zero-length string. Note that the value of entPhysicalName for two physical entities will be the same in the event that the console interface does not distinguish between them, e.g., slot-1 and the card in slot-1.
hwEntityExtTrap	1.3.6.1.4.1.2011.5.25.31.2.2
NTF hwBoardSoftwareVersionIncompatible	1.3.6.1.4.1.2011.5.25.31.2.2.1			Board software version incompatible with basic software version.
NTF hwBoardSplitPorts	1.3.6.1.4.1.2011.5.25.31.2.2.2			When the split ports exist on the board, send a SNMP trap to network manager.
hwDevicePowerInfoObjects	1.3.6.1.4.1.2011.5.25.31.3
I32 hwDevicePowerInfoTotalPower	1.3.6.1.4.1.2011.5.25.31.3.1	Integer32	read-only	Device total power.
I32 hwDevicePowerInfoUsedPower	1.3.6.1.4.1.2011.5.25.31.3.2	Integer32	read-only	Device used power.
hwEntityExtConformance	1.3.6.1.4.1.2011.5.25.31.4
hwEntityExtCompliances	1.3.6.1.4.1.2011.5.25.31.4.1
hwEntityExtCompliance	1.3.6.1.4.1.2011.5.25.31.4.1.1			The compliance statement for systems supporting the HUAWEI Entity extent MIB.
hwEntityExtGroups	1.3.6.1.4.1.2011.5.25.31.4.2
hwEntityExtGroup	1.3.6.1.4.1.2011.5.25.31.4.2.1			Standard HUAWEI Entity Extent group.
hwEntityExtNotificationGroup	1.3.6.1.4.1.2011.5.25.31.4.2.2			Standard HUAWEI Entity Extent Notification group.
hwRUModuleInfoGroup	1.3.6.1.4.1.2011.5.25.31.4.2.3			Standard HUAWEI Entity Extent group.
hwEntityExtOldObjectsGroup	1.3.6.1.4.1.2011.5.25.31.4.2.4			Group for old objects that may be obsoleted.
hwOpticalModuleInfoGroup	1.3.6.1.4.1.2011.5.25.31.4.2.5			Collection of objects that display the fiber module working information.
hwMonitorInputGroup	1.3.6.1.4.1.2011.5.25.31.4.2.6			Standard HUAWEI Entity Extent group.
hwMonitorOutputGroup	1.3.6.1.4.1.2011.5.25.31.4.2.7			Standard HUAWEI Entity Extent group.
hwEntPowerUsedInfoGroup	1.3.6.1.4.1.2011.5.25.31.4.2.8			Collection of objects that display the power informations of entity.
hwDevicePowerInfoGroup	1.3.6.1.4.1.2011.5.25.31.4.2.9			Collection of objects that display the power informations of device.
hwVirtualCableTestGroup	1.3.6.1.4.1.2011.5.25.31.4.2.10			Collection of objects that display the status of cable.
hwTemperatureThresholdGroup	1.3.6.1.4.1.2011.5.25.31.4.2.11			Temperature threshold group.
hwVoltageInfoGroup	1.3.6.1.4.1.2011.5.25.31.4.2.12			Voltage info group.
hwFanStatusGroup	1.3.6.1.4.1.2011.5.25.31.4.2.13			fan state group.
hwPnpGroup	1.3.6.1.4.1.2011.5.25.31.4.2.14			Pnp group.
hwSystemGlobalGroup	1.3.6.1.4.1.2011.5.25.31.4.2.15			System global group.
hwHeartbeatGroup	1.3.6.1.4.1.2011.5.25.31.4.2.16			Heart beat group.
hwPortBip8StatisticsObjectGroup	1.3.6.1.4.1.2011.5.25.31.4.2.17			The BIP8 statistics group.
hwPredisposeGroup	1.3.6.1.4.1.2011.5.25.31.4.2.18			Pnp group.
hwSystemPowerGroup	1.3.6.1.4.1.2011.5.25.31.4.2.19			Description.
hwX86BoardGroup	1.3.6.1.4.1.2011.5.25.31.4.2.20			X86 group.
hwPwrStatusGroup	1.3.6.1.4.1.2011.5.25.31.4.2.21			pwr state group.
hwPnpObjects	1.3.6.1.4.1.2011.5.25.31.5
hwPnpInfo	1.3.6.1.4.1.2011.5.25.31.5.1
STR hwHardwareCapaSequenceNo	1.3.6.1.4.1.2011.5.25.31.5.1.1	SnmpAdminString	read-only	This object indicates the sequence number of the 'hardware capability file'.The value consists of the file version number and CRC code.
STR hwAlarmPnPSequenceNo	1.3.6.1.4.1.2011.5.25.31.5.1.2	SnmpAdminString	read-only	This object indicates the sequence number of the 'alarm capability file'.The value consists of the file version number and CRC code.
hwPnpTraps	1.3.6.1.4.1.2011.5.25.31.5.2
NTF hwHardwareCapaChangeNotification	1.3.6.1.4.1.2011.5.25.31.5.2.1			This object indicates the change of the 'hardware capability file'. An alarm is generated if the sequence number of the 'hardware capability file' in the current startup file is different from that in the last startup file.
NTF hwAlarmPnPChangeNotification	1.3.6.1.4.1.2011.5.25.31.5.2.2			This object indicates the change of the 'alarm capability file'. An alarm is generated if the sequence number of the 'alarm capability file' in the current startup file is different from that in the last startup file.
hwPnpOperateTable	1.3.6.1.4.1.2011.5.25.31.5.3		not-accessible	This table describes the hardware functions. Using this table, you can obtain the specified 'hardware description file' or 'hardware capability file'.
hwPnpOperateEntry	1.3.6.1.4.1.2011.5.25.31.5.3.1		not-accessible
I32 hwFileGeneIndex	1.3.6.1.4.1.2011.5.25.31.5.3.1.1	Integer32	not-accessible	The value of this object identifies the operation index, which can be specified by the user. The value ranges from 1 to 2147483647.
INT hwFileGeneOperState	1.3.6.1.4.1.2011.5.25.31.5.3.1.2	INTEGER	read-only	The value of this object identifies the operation status. opInProgress(1): The operation is ongoing. opSuccess(2): The operation succeeds. opGetFileError(3): Obtaining the file fails. opInvalidDestName(4): The specified storage path is invalid. opNoFlashSpace(5): The space in the flash memory is insufficient. opWriteFileError(6): Writing the file fails. opDestoryError(7): Deleting the file fails.
INT hwFileGeneResourceType	1.3.6.1.4.1.2011.5.25.31.5.3.1.3	INTEGER	read-write	This object indicates the type of the file to be obtained. pnpcard(1): board description file pnpcard(2): subcard description file pnphardcapability(3): hardware capability file pnpPreDisposeCapability(4): predispose capability file pnpframe(5):frame description file pnpdevtype(6):device description file pnpalarm(7):alarm description file
STR hwFileGeneResourceID	1.3.6.1.4.1.2011.5.25.31.5.3.1.4	SnmpAdminString	read-write	This object indicates the ID of the 'hardware capability file' to be obtained.
STR hwFileGeneDestinationFile	1.3.6.1.4.1.2011.5.25.31.5.3.1.5	SnmpAdminString	read-write	This object indicates the target path storing the file, which does not need to be specified.
ROW hwFileGeneRowStatus	1.3.6.1.4.1.2011.5.25.31.5.3.1.6	RowStatus	read-create	This object indicates the row status. active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6)
hwSystemGlobalObjects	1.3.6.1.4.1.2011.5.25.31.6
OCT hwEntitySystemNetID	1.3.6.1.4.1.2011.5.25.31.6.1	OCTET STRING	read-write	Network element ID.
STR hwEntitySoftwareName	1.3.6.1.4.1.2011.5.25.31.6.2	SnmpAdminString	read-only	System software name.
STR hwEntitySoftwareVersion	1.3.6.1.4.1.2011.5.25.31.6.3	SnmpAdminString	read-only	Software version number.
STR hwEntitySoftwareVendor	1.3.6.1.4.1.2011.5.25.31.6.4	SnmpAdminString	read-only	Software vendor.
STR hwEntitySystemModel	1.3.6.1.4.1.2011.5.25.31.6.5	SnmpAdminString	read-only	Device model.
STR hwEntitySystemTime	1.3.6.1.4.1.2011.5.25.31.6.6	SnmpAdminString	read-write	System time displayed on the device.
STR hwEntitySystemMacAddress	1.3.6.1.4.1.2011.5.25.31.6.7	SnmpAdminString	read-only	MAC address of the device.
INT hwEntitySystemReset	1.3.6.1.4.1.2011.5.25.31.6.8	INTEGER	read-write	System reset.
I32 hwEntitySystemHealthInterval	1.3.6.1.4.1.2011.5.25.31.6.9	Integer32	read-write	Statistical interval for average CPU and memory usage, in seconds (By default, the value is 300) .
I32 hwEntitySystemNEId	1.3.6.1.4.1.2011.5.25.31.6.10	Integer32	read-write	Systme NEId.
STR hwEntitySystemServiceType	1.3.6.1.4.1.2011.5.25.31.6.11	SnmpAdminString	read-only	System service type.
hwHeartbeatObjects	1.3.6.1.4.1.2011.5.25.31.7
hwHeartbeatConfig	1.3.6.1.4.1.2011.5.25.31.7.1
INT hwEntityHeartbeatOnOff	1.3.6.1.4.1.2011.5.25.31.7.1.1	INTEGER	read-write	Whether Heartbeat sending periodically enabled.
I32 hwEntityHeartbeatPeriod	1.3.6.1.4.1.2011.5.25.31.7.1.2	Integer32	read-write	Heartbeat sending period detected in the trap reporting channel, with the minimum value of 60 seconds.
hwHeartbeatTrapPrefix	1.3.6.1.4.1.2011.5.25.31.7.2
NTF hwEntityHeartbeatTrap	1.3.6.1.4.1.2011.5.25.31.7.2.1			Heartbeat trap.
hwPreDisposeObjects	1.3.6.1.4.1.2011.5.25.31.8
hwPreDisposeInfo	1.3.6.1.4.1.2011.5.25.31.8.1
STR hwPreDisposeSequenceNo	1.3.6.1.4.1.2011.5.25.31.8.1.1	SnmpAdminString	read-only	This object indicates the sequence number of the 'predispose capability file'.The value consists of the file version number and CRC code.
hwPreDisposedTraps	1.3.6.1.4.1.2011.5.25.31.8.2
NTF hwInsertDiffFromPreDisposed	1.3.6.1.4.1.2011.5.25.31.8.2.1			This object indicates the type of the inserted entity is different from that of pre-disposed entity on the slot.
NTF hwPreDisposedChangeNotification	1.3.6.1.4.1.2011.5.25.31.8.2.2			This object indicates the change of the 'predispose capability file'. An alarm is generated if the sequence number of the 'predispose capability file' in the current startup file is different from that in the last startup file.
hwPreDisposeConfigTable	1.3.6.1.4.1.2011.5.25.31.8.3		not-accessible	Table of predisposing boards or flexible subcards.
hwPreDisposeConfigEntry	1.3.6.1.4.1.2011.5.25.31.8.3.1		not-accessible	Entry of the table to predispose boards or flexible subcards.
I32 hwDisposeSlot	1.3.6.1.4.1.2011.5.25.31.8.3.1.1	Integer32	read-write	This object indicates the slot ID of predisposed board.
I32 hwDisposeCardId	1.3.6.1.4.1.2011.5.25.31.8.3.1.2	Integer32	read-write	This object indicates the card ID of predisposed subcard.
OCT hwDisposeSbom	1.3.6.1.4.1.2011.5.25.31.8.3.1.3	OCTET STRING	read-write	This object indicates the sbom information of predisposed board or subcard.
ROW hwDisposeRowStatus	1.3.6.1.4.1.2011.5.25.31.8.3.1.4	RowStatus	read-create	This object indicates the row status when config predispose. active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6)
INT hwDisposeOperState	1.3.6.1.4.1.2011.5.25.31.8.3.1.5	INTEGER	read-only	The value of this object identifies the operation status. opSuccess(1): The operation succeeds. opInProgress(2): The operation is ongoing. opDevNotSupportPredispose(3): The device does not support predispose. opCardNotSupportPredispose(4): The type of card or subcard is not supported to be predisposed on this device. opAlreadyPredispose(5): The slot or subslot has already been predisposed. opCardConflict(6): The slot or subslot to be predisposed conflict with others. opDevOperationError(7): Other error occurs on the device.
hwPreDisposeEntInfoTable	1.3.6.1.4.1.2011.5.25.31.8.4		not-accessible	This table is used to get the information of predisposed entitys.
hwPreDisposeEntInfoEntry	1.3.6.1.4.1.2011.5.25.31.8.4.1		not-accessible	Entry of the table to get the information of predisposed entitys.
PHY hwDisposeEntPhysicalIndex	1.3.6.1.4.1.2011.5.25.31.8.4.1.1	PhysicalIndex	accessible-for-notify	The index for this entry.
STR hwDisposeEntPhysicalDescr	1.3.6.1.4.1.2011.5.25.31.8.4.1.2	SnmpAdminString	read-only	A textual description of predisposed physical entity.This object should contain a string which identifies the manufacturer's name for the physical entity.
OID hwDisposeEntPhysicalVendorType	1.3.6.1.4.1.2011.5.25.31.8.4.1.3	AutonomousType	read-only	An indication of the vendor-specific hardware type of the predisposed physical entity.
I32 hwDisposeEntPhysicalContainedIn	1.3.6.1.4.1.2011.5.25.31.8.4.1.4	Integer32	read-only	The value of 'entPhysicalContainedIn' for the predisposed physical entity.
PHY hwDisposeEntPhysicalClass	1.3.6.1.4.1.2011.5.25.31.8.4.1.5	PhysicalClass	read-only	An indication of the general hardware type of the predisposed physical entity.
I32 hwDisposeEntPhysicalParentRelPos	1.3.6.1.4.1.2011.5.25.31.8.4.1.6	Integer32	read-only	An indication of the relative position of this 'child' component among all its 'sibling' components.
STR hwDisposeEntPhysicalName	1.3.6.1.4.1.2011.5.25.31.8.4.1.7	SnmpAdminString	read-only	The textual name of the predisposed physical entity.
hwOSPUnifyManageObjects	1.3.6.1.4.1.2011.5.25.31.9
hwEntityExtOSPTrapsPrefix	1.3.6.1.4.1.2011.5.25.31.9.1
NTF hwEntityExtUnconnected	1.3.6.1.4.1.2011.5.25.31.9.1.1			Board become unconnected for some reason.
NTF hwEntityExtUnconnectedResume	1.3.6.1.4.1.2011.5.25.31.9.1.2			Board resume from unconnected

RFC description

Huawei extended entity MIB for device management including hardware, optical modules, and entity status.

Start monitoring Huawei router or switch (extended CPU/memory/entity/optics inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-ENTITY-EXTENT-MIB

What Is HUAWEI-ENTITY-EXTENT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description