HH3C-RCP-MIB

All MIBs › HH3C-RCP-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2006-09-20

Category: Vendor: H3C/HH3C

Description: HH3C MIB for Remote Configuration Protocol (RCP) managing remote device configuration capabilities.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-RCP-MIB?

HH3C-RCP-MIB is an H3C enterprise MIB for managing the Remote Configuration Protocol (RCP) server feature on H3C devices, which handles remote client configuration provisioning, likely in a broadband access or subscriber-management context. It exposes configuration objects for server enable status, connection and rule timeouts, maximum allowed connections, plus load-balance group ID bounds, alongside live operational counters for current connections, total users, and total client IPs served. This MIB is strongly monitoring-oriented for the RCP server's operational health: an admin can track hh3cRCPServerCurConn against hh3cRCPServerMaxConn to see if the server is near capacity, and hh3cRCPTotalUsers/hh3cRCPTotalClientIPs to gauge subscriber load, both of which are software-service health indicators analogous to a process/service-status check. No strong dependency on other standard MIBs is evident; it appears to be a self-contained service-status MIB. Typical deployment is on H3C broadband access or edge gateways acting as an RCP configuration server for downstream clients. Engineers can download the HH3C-RCP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-RCP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C broadband access/edge gateway

Monitoring Examples

An operator polls hh3cRCPServerCurConn against hh3cRCPServerMaxConn to detect when the RCP server is approaching its connection ceiling, which would cause new client provisioning requests to be rejected. hh3cRCPTotalUsers and hh3cRCPTotalClientIPs give a running count of served subscribers, useful for capacity trending. hh3cRCPConnTimeout and hh3cRCPRuleTimeout, checked against their MaxValue counterparts (hh3cRCPConnTimeoutMaxValue, hh3cRCPRuleTimeoutMaxValue), let an admin confirm timeout settings are within supported bounds after a configuration change.

What Can Be Monitored

current vs max RCP connections
total served users/client IPs
connection and rule timeouts
server enable status
load-balance group ID range

Imported Objects

From HH3C-OID-MIB

hh3cRCP

OBJECT-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cRCPMIB	1.3.6.1.4.1.25506.2.73.1			The MIB module is used for managing RCP protocol server.
hh3cRCPLeaf	1.3.6.1.4.1.25506.2.73.1.1
T/F hh3cRCPServerEnableStatus	1.3.6.1.4.1.25506.2.73.1.1.1	TruthValue	read-write	This attribute controls the system wide operation of RCP server. The value TRUE means that the RCP server is enabled. The value FALSE means that the RCP server is disabled.
I32 hh3cRCPConnTimeout	1.3.6.1.4.1.25506.2.73.1.1.2	Integer32	read-write	Specifies the maximum time in seconds that a RCP client connection is idle.
I32 hh3cRCPRuleTimeout	1.3.6.1.4.1.25506.2.73.1.1.3	Integer32	read-write	Specifies the time in seconds before a RCP rule is aged out. If its value is 0, it indicates RCP rule will not be aged out.
I32 hh3cRCPServerMaxConn	1.3.6.1.4.1.25506.2.73.1.1.4	Integer32	read-write	Specifies the maximum number of clients that permitted to connect with RCP server at the same time.
I32 hh3cRCPServerCurConn	1.3.6.1.4.1.25506.2.73.1.1.5	Integer32	read-only	The current actual number of clients that connecting with RCP server.
I32 hh3cRCPConnTimeoutMaxValue	1.3.6.1.4.1.25506.2.73.1.1.6	Integer32	read-only	Specifies the maximum value of hh3cRCPConnTimeout.
I32 hh3cRCPRuleTimeoutMaxValue	1.3.6.1.4.1.25506.2.73.1.1.7	Integer32	read-only	Specifies the maximum value of hh3cRCPRuleTimeout.
I32 hh3cRCPServerMaxConnMaxValue	1.3.6.1.4.1.25506.2.73.1.1.8	Integer32	read-only	Specifies the maximum value of hh3cRCPServerMaxConn.
I32 hh3cRCPBalanceGroupIdMinValue	1.3.6.1.4.1.25506.2.73.1.1.9	Integer32	read-only	Specifies the minimum value of balance group identity.
I32 hh3cRCPBalanceGroupIdMaxValue	1.3.6.1.4.1.25506.2.73.1.1.10	Integer32	read-only	Specifies the maximum value of balance group identity.
I32 hh3cRCPTotalUsers	1.3.6.1.4.1.25506.2.73.1.1.11	Integer32	read-only	Specifies the total number of RCP user.
I32 hh3cRCPTotalClientIPs	1.3.6.1.4.1.25506.2.73.1.1.12	Integer32	read-only	Specifies the total number of RCP client IP.
hh3cRCPTable	1.3.6.1.4.1.25506.2.73.1.2
hh3cRCPUserTable	1.3.6.1.4.1.25506.2.73.1.2.1		not-accessible	RCP User Info Table.
hh3cRCPUserEntry	1.3.6.1.4.1.25506.2.73.1.2.1.1		not-accessible	The entry of hh3cRCPUserTable.
STR hh3cRCPUserName	1.3.6.1.4.1.25506.2.73.1.2.1.1.1	DisplayString	not-accessible	The name of RCP user.
STR hh3cRCPUserPassword	1.3.6.1.4.1.25506.2.73.1.2.1.1.2	DisplayString	read-create	The password of RCP user. It is invisible to users and displayed as '***'.
NUM hh3cRCPUserRedirectInterface	1.3.6.1.4.1.25506.2.73.1.2.1.1.3	InterfaceIndexOrZero	read-create	The redirect interface index of RCP user. The RCP rule assigned by the user can be associated with the redirect interface. If the redirect interface is invalid, its value is set to be 0.
I32 hh3cRCPUserRedirectBalanceGroup	1.3.6.1.4.1.25506.2.73.1.2.1.1.4	Integer32	read-create	The redirect balance group identity of RCP user. The RCP rule assigned by the user can be associated with the redirect balance group. If the balance group is invalid, its value is set to be 0.
ROW hh3cRCPUserRowStatus	1.3.6.1.4.1.25506.2.73.1.2.1.1.5	RowStatus	read-create	This manages the creation and deletion of rows, and shows the current status of the indexed user name. This object has the following values. active(1) The indexed user name is configured on the device. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Create a new user. createAndWait(5) Not Supported. destroy(6) Delete this entry. The associated entry can be modified when the value of hh3cRCPUserRowStatus is active(1). When deleting an inexistence entry, return noError.
hh3cRCPClientIPTable	1.3.6.1.4.1.25506.2.73.1.2.2		not-accessible	RCP Client IP Table.
hh3cRCPClientIPEntry	1.3.6.1.4.1.25506.2.73.1.2.2.1		not-accessible	The entry of hh3cRCPClientIPTable.
IPt hh3cRCPClientIPType	1.3.6.1.4.1.25506.2.73.1.2.2.1.1	InetAddressType	not-accessible	The IP address type (IPv4 or IPv6) of RCP client.
IP hh3cRCPClientIP	1.3.6.1.4.1.25506.2.73.1.2.2.1.2	InetAddress	not-accessible	The IP address of RCP client.
ROW hh3cRCPClientIPRowStatus	1.3.6.1.4.1.25506.2.73.1.2.2.1.3	RowStatus	read-create	This manages the creation and deletion or rows, and shows the current status of the indexed client IP address. This object has the following values. active(1) The indexed client IP is configured on the device. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Create a new client IP. createAndWait(5) Not Supported. destroy(6) Delete this entry. The associated entry can be modified when the value of hh3cRCPClientIPRowStatus is active(1). When deleting an inexistence entry, return noError.
hh3cRCPSessionTable	1.3.6.1.4.1.25506.2.73.1.2.3		not-accessible	RCP session Table.
hh3cRCPSessionEntry	1.3.6.1.4.1.25506.2.73.1.2.3.1		not-accessible	The entry of hh3cRCPSessionTable.
I32 hh3cRCPSessionId	1.3.6.1.4.1.25506.2.73.1.2.3.1.1	Integer32	not-accessible	RCP session identity.
IPt hh3cRCPSessionClientIPType	1.3.6.1.4.1.25506.2.73.1.2.3.1.2	InetAddressType	read-only	The IP address type (IPv4 or IPv6) of RCP client.
IP hh3cRCPSessionClientIP	1.3.6.1.4.1.25506.2.73.1.2.3.1.3	InetAddress	read-only	RCP client IP address.
INT hh3cRCPSessionRunningStatus	1.3.6.1.4.1.25506.2.73.1.2.3.1.4	INTEGER	read-only	RCP server running status. It is one of the following status: connected: The connection is established and the RCP client is waiting for authentication. operational: The RCP client is authenticated and the server is ready for rule configuration request.
STR hh3cRCPSessionUserName	1.3.6.1.4.1.25506.2.73.1.2.3.1.5	DisplayString	read-only	RCP user name.

RFC description

H3C (Huawei subsidiary) vendor-private MIB for remote copy protocol configuration and management on enterprise networking devices.

Start monitoring H3C broadband access/edge gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-RCP-MIB

What Is HH3C-RCP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description