HH3C-LswVLAN-MIB

All MIBs › HH3C-LswVLAN-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2001-12-26

Category: Technology: Switching/L2, Technology: VLAN, Vendor: H3C/HH3C

Description: Manages VLAN creation, port membership, and trunk configuration on H3C Layer 2 switch platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-LswVLAN-MIB?

HH3C-LswVLAN-MIB is an H3C vendor MIB for managing VLAN configuration on H3C Layer 2 switch platforms. It exposes VLAN creation/deletion status, per-port VLAN membership (access/trunk), and trunk allowed-VLAN lists, giving a configuration-oriented view of Layer 2 segmentation. Its monitoring role is mainly around configuration and software state consistency: verifying that a port's actual VLAN membership matches intended design, and detecting orphaned or misconfigured VLANs that could cause traffic isolation failures. It supplements the IETF Q-BRIDGE-MIB, which defines the standard VLAN object model that H3C's implementation extends with vendor-specific controls. It is used on H3C access, distribution, and core switches in enterprise LAN environments that rely on VLAN segmentation for traffic isolation. Engineers can download the HH3C-LswVLAN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-LswVLAN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C Layer 2 switch

Monitoring Examples

No sample object names were provided in the source for this module, so specific OIDs cannot be cited, but typical monitoring involves polling per-port VLAN membership and trunk allowed-VLAN lists to confirm a port is carrying only the VLANs intended for it. A port unexpectedly missing from a VLAN's member list, or a trunk's allowed-VLAN range drifting from the documented design, would indicate a configuration error or unauthorized change.

What Can Be Monitored

VLAN existence/status
per-port VLAN membership
trunk allowed-VLAN list
access vs trunk port mode

Imported Objects

From HH3C-LswINF-MIB

PortList
hh3cifVLANTrunkStatusEntry	OBJECT-TYPE

From HH3C-OID-MIB

hh3clswCommon

OBJECT-IDENTITY

From RFC1213-MIB

ifEntry

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TimeInterval
TruthValue

How to Use in IPNetwork Monitor

Example using hh3cVLANMibSwitchGMRPRXPkt OID:

Select an H3C Layer 2 switch (VLAN configuration) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cVLANMibSwitchGMRPRXPkt into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of GMRP frames received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cLswVlan	1.3.6.1.4.1.25506.8.35.2
hh3cLswVlanMngObject	1.3.6.1.4.1.25506.8.35.2.1			Description.
hh3cdot1qVlanMIBTable	1.3.6.1.4.1.25506.8.35.2.1.1		not-accessible	VLAN MIB table
hh3cdot1qVlanMIBEntry	1.3.6.1.4.1.25506.8.35.2.1.1.1		not-accessible	Entries of VLAN MIB table
HH3 hh3cdot1qVlanIndex	1.3.6.1.4.1.25506.8.35.2.1.1.1.1	Hh3cVlanIndex	read-only	The VLAN-ID.
STR hh3cdot1qVlanName	1.3.6.1.4.1.25506.8.35.2.1.1.1.2	SnmpAdminString	read-write	Name of the VLAN.
POR hh3cdot1qVlanPorts	1.3.6.1.4.1.25506.8.35.2.1.1.1.3	PortList	read-write	Port list of the VLAN.
INT hh3cdot1qVlanType	1.3.6.1.4.1.25506.8.35.2.1.1.1.4	INTEGER	read-write	Vlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3).
T/F hh3cdot1qVlanMacFilter	1.3.6.1.4.1.25506.8.35.2.1.1.1.5	TruthValue	read-only	Whether to filter MAC addresses.
T/F hh3cdot1qVlanMcastUnknownProtos	1.3.6.1.4.1.25506.8.35.2.1.1.1.6	TruthValue	read-only	Whether to broadcast the unknown packets.
T/F hh3cExistInterface	1.3.6.1.4.1.25506.8.35.2.1.1.1.7	TruthValue	read-only	Whether there is virtual interface.
INT hh3cVlanInterfaceIndex	1.3.6.1.4.1.25506.8.35.2.1.1.1.8	INTEGER	read-only	Whether vlan interface is configured on vlan. If vlan interface is configured, the value of the node is vlan id, else the value is 0.
T/F hh3cdot1qVlanMacLearn	1.3.6.1.4.1.25506.8.35.2.1.1.1.9	TruthValue	read-only	MAC address learning identity. (common vlan/Sub-vlan)
INT hh3cdot1qVlanStatus	1.3.6.1.4.1.25506.8.35.2.1.1.1.10	INTEGER	read-only	Status of the VLAN.
TIK hh3cdot1qVlanCreationTime	1.3.6.1.4.1.25506.8.35.2.1.1.1.11	TimeTicks	read-only	The sysUPTime when the VLAN is created.
INT hh3cdot1qVlanPriority	1.3.6.1.4.1.25506.8.35.2.1.1.1.12	INTEGER	read-write	Priority of the VLAN.
ROW hh3cdot1qVlanRowStatus	1.3.6.1.4.1.25506.8.35.2.1.1.1.13	RowStatus	read-create	Operation status.
INT hh3cdot1qVlanBroadcastSuppression	1.3.6.1.4.1.25506.8.35.2.1.1.1.14	INTEGER	read-write	Whether broadcast suppression of vlan be supported pro rata. The vlaue of 100 indicates no broadcast suppression. If the function is not supported, this object cannot be written, and 100 will be returned when reading
INT hh3cdot1qVlanBcastSuppressionPPS	1.3.6.1.4.1.25506.8.35.2.1.1.1.15	INTEGER	read-write	If the broadcast can be controlled with pps(packet per second)type, the value of 0 indicates no suppression. This node is conflicted with hh3cdot1qVlanBroadcastSuppression. If the mode is set, hh3cdot1qVlanBroadcastSuppression is unavailable. And vice versa.
INT hh3cdot1qVlanMulticast	1.3.6.1.4.1.25506.8.35.2.1.1.1.16	INTEGER	read-write	Multicast vlan. The default value is disable(0).
POR hh3cdot1qVlanTaggedPorts	1.3.6.1.4.1.25506.8.35.2.1.1.1.17	PortList	read-only	Tagged port list of the VLAN.
POR hh3cdot1qVlanUntaggedPorts	1.3.6.1.4.1.25506.8.35.2.1.1.1.18	PortList	read-only	Untagged port list of the VLAN.
OCT hh3cdot1qVlanPortIndexs	1.3.6.1.4.1.25506.8.35.2.1.1.1.19	OCTET STRING	read-write	PortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7.
hh3cVlanInterfaceTable	1.3.6.1.4.1.25506.8.35.2.1.2		not-accessible	Virtual interface configuration table
hh3cVlanInterfaceEntry	1.3.6.1.4.1.25506.8.35.2.1.2.1		not-accessible	Entries of virtual interface configuration table
INT hh3cVlanInterfaceID	1.3.6.1.4.1.25506.8.35.2.1.2.1.1	INTEGER	read-only	Index of the vlan interface table.
HH3 hh3cdot1qVlanID	1.3.6.1.4.1.25506.8.35.2.1.2.1.2	Hh3cVlanIndex	read-only	VLAN-ID
IP hh3cdot1qVlanIpAddress	1.3.6.1.4.1.25506.8.35.2.1.2.1.3	IpAddress	read-write	IP address of interface.
IP hh3cdot1qVlanIpAddressMask	1.3.6.1.4.1.25506.8.35.2.1.2.1.4	IpAddress	read-write	IP address mask of interface.
INT hh3cVlanInterfaceAdminStatus	1.3.6.1.4.1.25506.8.35.2.1.2.1.5	INTEGER	read-write	Status of VLAN virtual interfaces.
INT hh3cVlanInterfaceFrameType	1.3.6.1.4.1.25506.8.35.2.1.2.1.6	INTEGER	read-only	Frame type accepted by VLAN virtual interfaces.
ROW hh3cInterfaceRowStatus	1.3.6.1.4.1.25506.8.35.2.1.2.1.7	RowStatus	read-create	Operation status.
INT hh3cVlanInterfaceIpMethod	1.3.6.1.4.1.25506.8.35.2.1.2.1.8	INTEGER	read-write	Vlan interface ip address acquiring method which is manual, dhcp or bootp.
INT hh3cVlanInterfaceIfIndex	1.3.6.1.4.1.25506.8.35.2.1.2.1.9	INTEGER	read-only	IfIndex of VLAN interface.
hh3cifIsolateMappingTable	1.3.6.1.4.1.25506.8.35.2.1.4		not-accessible	Secondary vlan lists of Isolate-VLANs.
hh3cifIsolateMappingEntry	1.3.6.1.4.1.25506.8.35.2.1.4.1		not-accessible	Secondary vlan lists of Isolate-VLANs.
HH3 hh3cifIsolatePrimaryVlanID	1.3.6.1.4.1.25506.8.35.2.1.4.1.1	Hh3cVlanIndex	read-only	Primary VLAN-ID.
OCT hh3cifIsolateSecondaryVlanlistLow	1.3.6.1.4.1.25506.8.35.2.1.4.1.2	OCTET STRING	read-write	Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
OCT hh3cifIsolateSecondaryVlanlistHigh	1.3.6.1.4.1.25506.8.35.2.1.4.1.3	OCTET STRING	read-write	Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each secondary VLAN of the primary VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is secondary VLAN in the set of VLANs; the VLAN is not secondary VLAN if its bit has a value of '0'.
hh3cVlanInterfaceAddrTable	1.3.6.1.4.1.25506.8.35.2.1.5		not-accessible	VLAN interface IP address configuration table
hh3cVlanInterfaceAddrEntry	1.3.6.1.4.1.25506.8.35.2.1.5.1		not-accessible	Entries of VLAN interface IP address configuration table
INT hh3cVlanInterfaceIpIfIndex	1.3.6.1.4.1.25506.8.35.2.1.5.1.1	INTEGER	read-only	Index of VLAN interfaces.
IP hh3cVlanInterfaceIpAddr	1.3.6.1.4.1.25506.8.35.2.1.5.1.2	IpAddress	read-write	IP address of VLAN interface. When taking destory operation, you could set it zero to destory all IP addresses(but cluster IP address) in this VLAN interface.
IP hh3cVlanInterfaceIpMask	1.3.6.1.4.1.25506.8.35.2.1.5.1.3	IpAddress	read-write	IP address mask of VLAN interface. When destory single IP address, you must set it correct to relative IP address.
INT hh3cVlanInterfaceIpType	1.3.6.1.4.1.25506.8.35.2.1.5.1.4	INTEGER	read-write	IP address type. cluster(3) will only be set when taking GET or GET NEXT operation. primary(1) is optional when taking SET primary IP address operation.
ROW hh3cVlanInterfaceIpRowStatus	1.3.6.1.4.1.25506.8.35.2.1.5.1.5	RowStatus	read-create	Operation status. active(1) will only be set when taking GET or GET NEXT operation. createAndGo(4) and destory(6) is valid when taking SET operation.
hh3cDot1qVlanBatchMIBTable	1.3.6.1.4.1.25506.8.35.2.1.6		not-accessible	VLAN batch configuration table. In the case of VLAN batch creation, hh3cdot1qVlanBatchSetOperate should be set to 1. For example, if creating a row is for creating VLANs 2 to 4, the value of the objects should be set as follows: hh3cdot1qVlanBatchStartIndex 2, hh3cdot1qVlanBatchEndIndex 4, hh3cdot1qVlanBatchSetOperate create(1), hh3cdot1qVlanBatchRowStatus createAndGo(4). In the case of VLAN batch deletion, hh3cdot1qVlanBatchSetOperate should be set to 2. For example, if creating a row is for deleting VLANs 10 to 20, the value of the objects should be set as follows: hh3cdot1qVlanBatchStartIndex 10, hh3cdot1qVlanBatchEndIndex 20, hh3cdot1qVlanBatchSetOperate delete(2), hh3cdot1qVlanBatchRowStatus createAndGo(4). When the action of batch VLANs deleting or creating is done, one row will be existent until it is deleted manually or ages out, but the VLANs of it won't disappear with the deletion of the row.
hh3cDot1qVlanBatchMIBEntry	1.3.6.1.4.1.25506.8.35.2.1.6.1		not-accessible	VLAN batch configuration entry.
I32 hh3cdot1qVlanBatchOperIndex	1.3.6.1.4.1.25506.8.35.2.1.6.1.1	Integer32	read-only	The consequence of operation.
HH3 hh3cdot1qVlanBatchStartIndex	1.3.6.1.4.1.25506.8.35.2.1.6.1.2	Hh3cVlanIndex	read-write	The value of start VLAN-ID.
HH3 hh3cdot1qVlanBatchEndIndex	1.3.6.1.4.1.25506.8.35.2.1.6.1.3	Hh3cVlanIndex	read-write	The value of end VLAN-ID.
INT hh3cdot1qVlanBatchOperStatus	1.3.6.1.4.1.25506.8.35.2.1.6.1.4	INTEGER	read-only	The status of operation.
ROW hh3cdot1qVlanBatchRowStatus	1.3.6.1.4.1.25506.8.35.2.1.6.1.5	RowStatus	read-create	The row status of Hh3cDot1qVlanBatchMIBEntry.
INT hh3cdot1qVlanBatchSetOperate	1.3.6.1.4.1.25506.8.35.2.1.6.1.6	INTEGER	read-create	VLAN batch creation or deletion.
hh3cifSuperVlanMappingTable	1.3.6.1.4.1.25506.8.35.2.1.7		not-accessible	Sub VLAN lists of super-VLANs.
hh3cifSuperVlanMappingEntry	1.3.6.1.4.1.25506.8.35.2.1.7.1		not-accessible	Sub VLAN lists of super-VLANs.
HH3 hh3cifSuperVlanID	1.3.6.1.4.1.25506.8.35.2.1.7.1.1	Hh3cVlanIndex	read-only	Super VLAN ID.
OCT hh3cifSubVlanlistLow	1.3.6.1.4.1.25506.8.35.2.1.7.1.2	OCTET STRING	read-write	Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'.
OCT hh3cifSubVlanlistHigh	1.3.6.1.4.1.25506.8.35.2.1.7.1.3	OCTET STRING	read-write	Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each sub VLAN of the super VLAN is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is a sub VLAN of the super VLAN; the VLAN is not a sub VLAN of the super VLAN if its bit has a value of '0'.
hh3cLswVlanProtoObject	1.3.6.1.4.1.25506.8.35.2.2			Description.
NUM hh3cVLANMibGarpLeaveAllTime	1.3.6.1.4.1.25506.8.35.2.2.14	TimeInterval	read-write	The GARP LeaveAll time, in centiseconds.
hh3cvLANMibSwitchCountTable	1.3.6.1.4.1.25506.8.35.2.2.15		not-accessible	A table containing the information various statistics of switch.
hh3cvLANMibSwitchCountEntry	1.3.6.1.4.1.25506.8.35.2.2.15.1		not-accessible	A table containing the information various statistics of switch.
C32 hh3cVLANMibSwitchGMRPRXPktEx	1.3.6.1.4.1.25506.8.35.2.2.15.1.1	Counter32	read-only	Number of GMRP frames received.
C32 hh3cVLANMibSwitchGVRPRXPkt	1.3.6.1.4.1.25506.8.35.2.2.15.1.2	Counter32	read-only	Number of GVRP frames received.
C32 hh3cVLANMibSwitchGMRPTXPkt	1.3.6.1.4.1.25506.8.35.2.2.15.1.3	Counter32	read-only	Number of GMRP frames transmitted.
C32 hh3cVLANMibSwitchGVRPTXPkt	1.3.6.1.4.1.25506.8.35.2.2.15.1.4	Counter32	read-only	Number of GVRP frames transmitted.
C32 hh3cVLANMibSwitchDiscardedPkt	1.3.6.1.4.1.25506.8.35.2.2.15.1.5	Counter32	read-only	Number of discarded frames.
INT hh3cVLANMibSwitchGarpStatClear	1.3.6.1.4.1.25506.8.35.2.2.15.1.6	INTEGER	read-write	Clear various Statistics viz. read operation not supported.
hh3cvLANMibHoldTimeTable	1.3.6.1.4.1.25506.8.35.2.2.16		not-accessible	A table for setting/getting the Hold Time for a particular port.
hh3cvLANMibHoldTimeEntry	1.3.6.1.4.1.25506.8.35.2.2.16.1		not-accessible	A table for setting/getting the HoldTime of the port.
INT hh3cVLANMibHoldTime	1.3.6.1.4.1.25506.8.35.2.2.16.1.1	INTEGER	read-write	HoldTime of the port.

RFC description

Manages VLAN configuration and operations on H3C LAN switches including tagged/untagged port membership and batch VLAN operations.

Start monitoring H3C Layer 2 switch (VLAN configuration) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-LswVLAN-MIB