HH3C-LswDEVM-MIB

All MIBs › HH3C-LswDEVM-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2001-06-29

Category: Device Management, Hardware and Environment, Technology: Switching/L2, Vendor: H3C/HH3C

Description: Manages device module inventory, slot states, and hardware component events on H3C Layer 2 switch platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-LswDEVM-MIB?

HH3C-LswDEVM-MIB is a vendor-specific SNMP module from H3C (Hewlett-Packard/Huawei-affiliated networking vendor, now HPE-owned) for managing device module inventory, slot states, and hardware component events on H3C Layer 2 switch platforms. It exposes CPU utilization tables, memory usage tables, and flash/device module inventory objects, covering the physical and modular composition of the switch. This is fundamentally a hardware/software health monitoring MIB: hh3cCpuCostRatePer1Min/hh3cCpuCostRatePer5Min track CPU load over time, hh3cMemSize/hh3cMemFree/hh3cMemRawSliceUsed track memory utilization, and the device/flash objects support tracking hardware slot and module presence - all classic indicators used to detect an overloaded, memory-starved, or partially failed switch. It likely complements standard entity/interface MIBs (such as ENTITY-MIB) for physical inventory, though this is not explicitly stated in the source. Typical deployment context is enterprise or campus network closets running H3C/HPE Comware-based Layer 2 switches, and administrators can download the HH3C-LswDEVM-MIB file to load into their monitoring tools.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-LswDEVM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C Layer 2 managed switch

Monitoring Examples

An administrator would poll hh3cCpuTable/hh3cCpuEntry per hh3cCpuIndex to read hh3cCpuCostRatePer5Min, flagging sustained high CPU load that could indicate a control-plane issue or attack. Walking hh3cMemTable by hh3cMemModuleIndex to compare hh3cMemFree against hh3cMemSize reveals memory pressure on a specific module before it triggers a crash or packet drops. A sudden drop in hh3cMemFree alongside rising hh3cCpuCostRatePer1Min would be a strong signal of a runaway process or memory leak on the switch.

What Can Be Monitored

CPU utilization (1-min/5-min)
memory total/free/used
device module inventory
flash storage status

Imported Objects

From HH3C-LSW-DEV-ADM-MIB

hh3cLswFrameIndex	OBJECT-TYPE
hh3cLswSlotIndex	OBJECT-TYPE

From HH3C-OID-MIB

hh3cRhw	OBJECT-IDENTITY
hh3clswCommon	OBJECT-IDENTITY

From SNMPv2-SMI

Gauge32
MODULE-IDENTITY
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks

How to Use in IPNetwork Monitor

Example using hh3cCpuCostRate OID:

Select an H3C Layer 2 managed switch (CPU/memory/module inventory) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cCpuCostRate into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The overall CPU busy percentage in the last 5 second period. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if utilization exceeds 85%, a common warning threshold before sustained high load affects performance. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cDevice	1.3.6.1.4.1.25506.8.8
hh3cCpuTable	1.3.6.1.4.1.25506.8.8.1		not-accessible	A table of CPU statistics.
hh3cCpuEntry	1.3.6.1.4.1.25506.8.8.1.1		not-accessible	The Entries of hh3cCpuTable.
INT hh3cCpuIndex	1.3.6.1.4.1.25506.8.8.1.1.1	INTEGER	not-accessible	Index of hh3cCpuTable. This integer is a uniq number to identify the CPU(s). We recommand two Number Plans in this paper, Logical Number or Phisical Number. For the first case, hh3cCpuIndex is a integer, range from 1 to the Maximum number, for example 1,2,3,4,5 ..., where 1 represents the first CPU, 2 represents the second CPU, etc. For the second case hh3cCpuIndex represents physical card position (Shelf Number, Frame Number, Slot Number, SubSlotNumber) where the CPU residing, for example, 0x01020304 represent the CPU on the 4th subslot of the 3th slot of the 2nd frame of the 1st Shelf. In the condition of multiple CPU system where CPU group coordinately process on one board, we see the CPUs as one CPU
G32 hh3cCpuCostRateEx	1.3.6.1.4.1.25506.8.8.1.1.2	Gauge32	read-only	The overall CPU busy percentage in the last 5 second period.
G32 hh3cCpuCostRatePer1Min	1.3.6.1.4.1.25506.8.8.1.1.3	Gauge32	read-only	The overall CPU cost percentage in the last 1 minute period.
G32 hh3cCpuCostRatePer5Min	1.3.6.1.4.1.25506.8.8.1.1.4	Gauge32	read-only	The overall CPU cost percentage in the last 5 minutes period.
hh3cMem	1.3.6.1.4.1.25506.8.8.2
hh3cMemTable	1.3.6.1.4.1.25506.8.8.2.1		not-accessible	This table contains memory information.
hh3cMemEntry	1.3.6.1.4.1.25506.8.8.2.1.1		not-accessible	The Entries of hh3cMemTable
INT hh3cMemModuleIndex	1.3.6.1.4.1.25506.8.8.2.1.1.1	INTEGER	not-accessible	Index of hh3cMemTable. This integer is a uniq number to identify the memory module. We recommand two Number Plans in this paper, Logical Number or Phisical Number. For the first case, hh3cMemModuleIndex is a integer, range from 1 to the Maximum number, for example 1,2,3,4,5 ..., where 1 represents the first memory module, 2 represents the second memory module, etc. For the second case hh3cMemModuleIndex represents physical card position (Shelf Number, Frame Number, Slot Number, SubSlotNumber) where the memory module residing, for example, 0x01020304 represent the memory module on the 4th subslot of the 3th slot of the 2nd frame of the 1st Shelf.
G32 hh3cMemSize	1.3.6.1.4.1.25506.8.8.2.1.1.2	Gauge32	read-only	Indicates the total size of the memory module which is on the managed object.
G32 hh3cMemFree	1.3.6.1.4.1.25506.8.8.2.1.1.3	Gauge32	read-only	Indicates the free size of the memory
G32 hh3cMemRawSliceUsed	1.3.6.1.4.1.25506.8.8.2.1.1.4	Gauge32	read-only	Indicates the used size of the raw slice memory
G32 hh3cMemLgFree	1.3.6.1.4.1.25506.8.8.2.1.1.5	Gauge32	read-only	The largest free size of the contiguous area in the memory. The unit is byte.
G32 hh3cMemFail	1.3.6.1.4.1.25506.8.8.2.1.1.6	Gauge32	read-only	The times of memory allocation failures
G32 hh3cMemFailNoMem	1.3.6.1.4.1.25506.8.8.2.1.1.7	Gauge32	read-only	The times of memory allocation failures due to no free memory.
hh3cBufTable	1.3.6.1.4.1.25506.8.8.2.2		not-accessible	This table contains buffer information.
hh3cBufEntry	1.3.6.1.4.1.25506.8.8.2.2.1		not-accessible	The Entries of hh3cBufferTable
INT hh3cBufModuleIndex	1.3.6.1.4.1.25506.8.8.2.2.1.1	INTEGER	not-accessible	Index of hh3cBufferTable. This integer is a uniq number to identify the buffer module. We recommand two Number Plans in this paper, Logical Number or Phisical Number. For the first case, hh3cBufferModuleIndex is a integer, range from 1 to the Maximum number, for example 1,2,3,4,5 ..., where 1 represents the first buffer module, 2 represents the second buffer module, etc. For the second case hh3cBufferModuleIndex represents physical card position (Shelf Number, Frame Number, Slot Number, SubSlotNumber) where the buffer module residing, for example, 0x01020304 represent the buffer module on the 4th subslot of the 3th slot of the 2nd frame of the 1st Shelf.
INT hh3cBufSize	1.3.6.1.4.1.25506.8.8.2.2.1.2	INTEGER	not-accessible	The size of buffer,unit is byte.
G32 hh3cBufCurrentTotal	1.3.6.1.4.1.25506.8.8.2.2.1.3	Gauge32	read-only	The total number of buffer currently.
G32 hh3cBufCurrentUsed	1.3.6.1.4.1.25506.8.8.2.2.1.4	Gauge32	read-only	The number of used buffer currently.
hh3cFlh	1.3.6.1.4.1.25506.8.8.3
INT hh3cFlhTotalSize	1.3.6.1.4.1.25506.8.8.3.1	INTEGER	read-only	The flash memory's total size, in kilobyte
INT hh3cFlhTotalFree	1.3.6.1.4.1.25506.8.8.3.2	INTEGER	read-only	The free space in internal flash memory, in kilobyte
TIK hh3cFlhLastDelTime	1.3.6.1.4.1.25506.8.8.3.3	TimeTicks	read-only	The time since system up of the lastest deleting operation of flash memory.The value of Zero indicates there is no erasing operation since system up
INT hh3cFlhDelState	1.3.6.1.4.1.25506.8.8.3.4	INTEGER	read-only	The state indicates the result of current or lastest flash memory deleting operation
INT hh3cFlhState	1.3.6.1.4.1.25506.8.8.3.5	INTEGER	read-only	Busy indicates the flash memory is unavailable due to others may be using it, and free indicates the flash memory is available now
hh3cLswdevMMib	1.3.6.1.4.1.25506.8.35.9
hh3cLswdevMMibObject	1.3.6.1.4.1.25506.8.35.9.1			Description.
hh3cdevMFanStatusTable	1.3.6.1.4.1.25506.8.35.9.1.1		not-accessible	Fan status description table
hh3cdevMFanStatusEntry	1.3.6.1.4.1.25506.8.35.9.1.1.1		not-accessible	Fan status description table entry
INT hh3cDevMFanNum	1.3.6.1.4.1.25506.8.35.9.1.1.1.1	INTEGER	read-only	Fan number
INT hh3cDevMFanStatus	1.3.6.1.4.1.25506.8.35.9.1.1.1.2	INTEGER	read-only	Fan status: active (1), deactive (2) not installed (3) and unsupported (4)
hh3cdevMPowerStatusTable	1.3.6.1.4.1.25506.8.35.9.1.2		not-accessible	Power status description table
hh3cdevMPowerStatusEntry	1.3.6.1.4.1.25506.8.35.9.1.2.1		not-accessible	Power status description table entry
INT hh3cDevMPowerNum	1.3.6.1.4.1.25506.8.35.9.1.2.1.1	INTEGER	read-only	Power number
INT hh3cDevMPowerStatus	1.3.6.1.4.1.25506.8.35.9.1.2.1.2	INTEGER	read-only	Power status: active (1), deactive (2) not installed (3) and unsupported
hh3cdevMSlotEnvironmentTable	1.3.6.1.4.1.25506.8.35.9.1.3		not-accessible	environment description table
hh3cdevMSlotEnvironmentEntry	1.3.6.1.4.1.25506.8.35.9.1.3.1		not-accessible	environment description table entry
INT hh3cdevMSlotEnvironmentType	1.3.6.1.4.1.25506.8.35.9.1.3.1.1	INTEGER	not-accessible	Environment type
INT hh3cDevMSlotEnvironmentStatus	1.3.6.1.4.1.25506.8.35.9.1.3.1.2	INTEGER	read-only	Environment status
INT hh3cDevMSlotEnvironmentValue	1.3.6.1.4.1.25506.8.35.9.1.3.1.3	INTEGER	read-only	Environment value
INT hh3cDevMSlotEnvironmentUpperLimit	1.3.6.1.4.1.25506.8.35.9.1.3.1.4	INTEGER	read-write	Environment upper limit
INT hh3cDevMSlotEnvironmentLowerLimit	1.3.6.1.4.1.25506.8.35.9.1.3.1.5	INTEGER	read-write	Environment Lower limit
INT hh3cLinkUpDownTrapEnable	1.3.6.1.4.1.25506.8.35.9.1.9	INTEGER	read-write	Enable/Disable linkUp/linkDown traps of the device, determining whether to enable linkUp/linkDown traps with that of the interface. When the value is enableBoth(1), the linkUp/linkDown traps are both enabled. When the value is disableBoth(2), the linkUp/linkDown traps are both disabled. When the value is enableLinkUpTrapOnly(3), the linkUp traps is enabled and the linkDown traps is disabled. When the value is enableLinkDownTrapOnly(4), the linkUp traps is disabled and the linkDown traps is enabled.
INT hh3cdot1qTpFdbLearnStatus	1.3.6.1.4.1.25506.8.35.9.1.10	INTEGER	read-write	Enable/Disable the address learning.
INT hh3cCfmWriteFlash	1.3.6.1.4.1.25506.8.35.9.1.11	INTEGER	read-write	Write the current effective configuration into the Flash memory. This object does not support read operation.
INT hh3cCfmEraseFlash	1.3.6.1.4.1.25506.8.35.9.1.12	INTEGER	read-write	Delete the configuration from the Flash memory. This object does not support read operation.

RFC description

H3C LAN Switch Device Management MIB for CPU, memory, flash, and hardware status monitoring.

Start monitoring H3C Layer 2 managed switch (CPU/memory/module inventory) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-LswDEVM-MIB